libtool: finish: PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/buildroot/autobuild/instance-1/output-1/host/lib ---------------------------------------------------------------------- Libraries have been installed in: /home/buildroot/autobuild/instance-1/output-1/host/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[5]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/liblzma' make[4]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/liblzma' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/liblzma' Making install in xzdec make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/xzdec' make[4]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/xzdec' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/bin' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/share/man/man1' /bin/bash ../../libtool --mode=install /usr/bin/install -c xzdec lzmadec '/home/buildroot/autobuild/instance-1/output-1/host/bin' /usr/bin/install -c -m 644 xzdec.1 '/home/buildroot/autobuild/instance-1/output-1/host/share/man/man1' /usr/bin/make install-data-hook make[5]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/xzdec' languages= ; \ if test "no" = yes && test -d "../../po4a/man"; then \ languages=`ls "../../po4a/man"`; \ fi; \ target=`echo xzdec | sed 's,x,x,'` && \ link=`echo lzmadec | sed 's,x,x,'` && \ for lang in . $languages; do \ man="../../po4a/man/$lang/xzdec.1" ; \ if test -f "$man"; then \ /usr/bin/make dist_man_MANS="$man" man_MANS= \ mandir="/home/buildroot/autobuild/instance-1/output-1/host/share/man/$lang" install-man; \ fi; \ man1dir="/home/buildroot/autobuild/instance-1/output-1/host/share/man/$lang/man1" && \ if test -f "$man1dir/$target.1"; then \ if test -n "lzmadec"; then ( \ cd "$man1dir" && \ rm -f "$link.1" && \ ln -s "$target.1" "$link.1" \ ); fi; \ fi; \ done make[5]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/xzdec' libtool: install: /usr/bin/install -c xzdec /home/buildroot/autobuild/instance-1/output-1/host/bin/xzdec libtool: install: /usr/bin/install -c lzmadec /home/buildroot/autobuild/instance-1/output-1/host/bin/lzmadec make[4]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/xzdec' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/xzdec' Making install in xz make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/xz' make[4]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/xz' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/bin' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/share/man/man1' /bin/bash ../../libtool --mode=install /usr/bin/install -c xz '/home/buildroot/autobuild/instance-1/output-1/host/bin' /usr/bin/install -c -m 644 xz.1 '/home/buildroot/autobuild/instance-1/output-1/host/share/man/man1' /usr/bin/make install-data-hook make[5]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/xz' languages= ; \ if test "no" = yes && test -d "../../po4a/man"; then \ languages=`ls "../../po4a/man"`; \ fi; \ target=`echo xz | sed 's,x,x,'` && \ for lang in . $languages; do \ man="../../po4a/man/$lang/xz.1" ; \ if test -f "$man"; then \ /usr/bin/make dist_man_MANS="$man" man_MANS= \ mandir="/home/buildroot/autobuild/instance-1/output-1/host/share/man/$lang" install-man; \ fi; \ man1dir="/home/buildroot/autobuild/instance-1/output-1/host/share/man/$lang/man1" && \ if test -f "$man1dir/$target.1"; then ( \ cd "$man1dir" && \ for name in unxz xzcat lzma unlzma lzcat; do \ link=`echo $name | sed 's,x,x,'` && \ rm -f "$link.1" && \ ln -s "$target.1" "$link.1"; \ done \ ); fi; \ done make[5]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/xz' libtool: install: /usr/bin/install -c xz /home/buildroot/autobuild/instance-1/output-1/host/bin/xz /usr/bin/make install-exec-hook make[5]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/xz' cd "/home/buildroot/autobuild/instance-1/output-1/host/bin" && \ target=`echo xz | sed 's,x,x,'` && \ for name in unxz xzcat lzma unlzma lzcat; do \ link=`echo $name | sed 's,x,x,'` && \ rm -f "$link" && \ ln -s "$target" "$link"; \ done make[5]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/xz' make[4]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/xz' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/xz' Making install in lzmainfo make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/lzmainfo' make[4]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/lzmainfo' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/bin' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/share/man/man1' /bin/bash ../../libtool --mode=install /usr/bin/install -c lzmainfo '/home/buildroot/autobuild/instance-1/output-1/host/bin' /usr/bin/install -c -m 644 lzmainfo.1 '/home/buildroot/autobuild/instance-1/output-1/host/share/man/man1' libtool: install: /usr/bin/install -c lzmainfo /home/buildroot/autobuild/instance-1/output-1/host/bin/lzmainfo make[4]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/lzmainfo' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/lzmainfo' Making install in scripts make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/scripts' make[4]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/scripts' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/bin' /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/share/man/man1' /usr/bin/install -c xzdiff xzgrep xzmore xzless '/home/buildroot/autobuild/instance-1/output-1/host/bin' /usr/bin/make install-exec-hook /usr/bin/install -c -m 644 xzdiff.1 xzgrep.1 xzmore.1 xzless.1 '/home/buildroot/autobuild/instance-1/output-1/host/share/man/man1' /usr/bin/make install-data-hook make[5]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/scripts' cd "/home/buildroot/autobuild/instance-1/output-1/host/bin" && \ for pair in xzdiff-xzcmp xzgrep-xzegrep xzgrep-xzfgrep xzdiff-lzdiff xzdiff-lzcmp xzgrep-lzgrep xzgrep-lzegrep xzgrep-lzfgrep xzmore-lzmore xzless-lzless; do \ target=`echo $pair | sed 's/-.*$//' | sed 's,x,x,'` && \ link=`echo $pair | sed 's/^.*-//' | sed 's,x,x,'` && \ rm -f "$link" && \ ln -s "$target" "$link"; \ done make[5]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/scripts' languages= ; \ if test "no" = yes && test -d "../../po4a/man"; then \ languages=`ls "../../po4a/man"`; \ fi; \ for lang in $languages; do \ mans= ; \ for man in xzdiff.1 xzgrep.1 xzmore.1 xzless.1; do \ man="../../po4a/man/$lang/$man" ; \ if test -f "$man"; then \ mans="$mans $man"; \ fi; \ done; \ /usr/bin/make dist_man_MANS="$mans" man_MANS= \ mandir="/home/buildroot/autobuild/instance-1/output-1/host/share/man/$lang" install-man; \ done; \ for lang in . $languages; do \ for pair in xzdiff-xzcmp xzgrep-xzegrep xzgrep-xzfgrep xzdiff-lzdiff xzdiff-lzcmp xzgrep-lzgrep xzgrep-lzegrep xzgrep-lzfgrep xzmore-lzmore xzless-lzless; do \ target=`echo $pair | sed 's/-.*$//' \ | sed 's,x,x,'` && \ link=`echo $pair | sed 's/^.*-//' \ | sed 's,x,x,'` && \ man1dir="/home/buildroot/autobuild/instance-1/output-1/host/share/man/$lang/man1" && \ if test -f "$man1dir/$target.1"; then ( \ cd "$man1dir" && \ rm -f "$link.1" && \ ln -s "$target.1" "$link.1" \ ); fi; \ done; \ done make[5]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/scripts' make[5]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/scripts' make[4]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/scripts' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src/scripts' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src' make[4]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/src' Making install in po make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/po' if test "xz" = "gettext-tools"; then \ /bin/mkdir -p /home/buildroot/autobuild/instance-1/output-1/host/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /home/buildroot/autobuild/instance-1/output-1/host/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /home/buildroot/autobuild/instance-1/output-1/host/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/po' Making install in tests make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/tests' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/tests' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/tests' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5/tests' make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5' make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/host-xz-5.2.5' wireless-regdb-2022.02.18.tar.xz: OK (sha256: 8828c25a4ee25020044004f57374bb9deac852809fad70f8d3d01770bf9ac97f) >>> wireless-regdb 2022.02.18 Extracting xzcat /home/buildroot/autobuild/instance-1/dl/wireless-regdb/wireless-regdb-2022.02.18.tar.xz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-1/output-1/build/wireless-regdb-2022.02.18 -xf - >>> wireless-regdb 2022.02.18 Patching >>> wireless-regdb 2022.02.18 Configuring >>> wireless-regdb 2022.02.18 Building >>> wireless-regdb 2022.02.18 Installing to target /usr/bin/install -m 644 -D -T /home/buildroot/autobuild/instance-1/output-1/build/wireless-regdb-2022.02.18/regulatory.db /home/buildroot/autobuild/instance-1/output-1/target/lib/firmware/regulatory.db /usr/bin/install -m 644 -D -T /home/buildroot/autobuild/instance-1/output-1/build/wireless-regdb-2022.02.18/regulatory.db.p7s /home/buildroot/autobuild/instance-1/output-1/target/lib/firmware/regulatory.db.p7s linux-cip-5.10.109-cip5-rt4.tar.gz: OK (sha256: 71fba4ed5cb48fa7869e9fe271b68b77fed26775ce5cf2f50891aa8f71c388b3) >>> linux 5.10.109-cip5-rt4 Extracting gzip -d -c /home/buildroot/autobuild/instance-1/dl/linux/linux-cip-5.10.109-cip5-rt4.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4 -xf - >>> ev3dev-linux-drivers 0e551eb25ae8600c1f178814781bfb42dc835496 Downloading wget --passive-ftp -nd -t 3 -O '/home/buildroot/autobuild/instance-1/output-1/build/.ev3dev-linux-drivers-0e551eb25ae8600c1f178814781bfb42dc835496.tar.gz.JQWRR4/output' 'https://github.com/ev3dev/lego-linux-drivers/archive/0e551eb25ae8600c1f178814781bfb42dc835496/ev3dev-linux-drivers-0e551eb25ae8600c1f178814781bfb42dc835496.tar.gz' --2022-06-28 01:03:51-- https://github.com/ev3dev/lego-linux-drivers/archive/0e551eb25ae8600c1f178814781bfb42dc835496/ev3dev-linux-drivers-0e551eb25ae8600c1f178814781bfb42dc835496.tar.gz Resolving github.com (github.com)... 140.82.114.3 Connecting to github.com (github.com)|140.82.114.3|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/ev3dev/lego-linux-drivers/tar.gz/0e551eb25ae8600c1f178814781bfb42dc835496 [following] --2022-06-28 01:03:52-- https://codeload.github.com/ev3dev/lego-linux-drivers/tar.gz/0e551eb25ae8600c1f178814781bfb42dc835496 Resolving codeload.github.com (codeload.github.com)... 140.82.113.10 Connecting to codeload.github.com (codeload.github.com)|140.82.113.10|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/x-gzip] Saving to: '/home/buildroot/autobuild/instance-1/output-1/build/.ev3dev-linux-drivers-0e551eb25ae8600c1f178814781bfb42dc835496.tar.gz.JQWRR4/output' 0K .......... .......... .......... .......... .......... 368K 50K .......... .......... .......... .......... .......... 736K 100K .......... .......... .......... .......... .......... 77.8M 150K .......... .......... .......... .......... .......... 74.3M 200K .......... .......... .......... ........ 576K=0.3s 2022-06-28 01:03:52 (877 KB/s) - '/home/buildroot/autobuild/instance-1/output-1/build/.ev3dev-linux-drivers-0e551eb25ae8600c1f178814781bfb42dc835496.tar.gz.JQWRR4/output' saved [244303] WARNING: no hash file for ev3dev-linux-drivers-0e551eb25ae8600c1f178814781bfb42dc835496.tar.gz >>> ev3dev-linux-drivers 0e551eb25ae8600c1f178814781bfb42dc835496 Extracting gzip -d -c /home/buildroot/autobuild/instance-1/dl/ev3dev-linux-drivers/ev3dev-linux-drivers-0e551eb25ae8600c1f178814781bfb42dc835496.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-1/output-1/build/ev3dev-linux-drivers-0e551eb25ae8600c1f178814781bfb42dc835496 -xf - >>> ev3dev-linux-drivers 0e551eb25ae8600c1f178814781bfb42dc835496 Patching >>> linux 5.10.109-cip5-rt4 Patching mkdir -p /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4/drivers/lego cp -dpfr /home/buildroot/autobuild/instance-1/output-1/build/ev3dev-linux-drivers-0e551eb25ae8600c1f178814781bfb42dc835496/* /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4/drivers/lego/ if [ -f /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4/tools/perf/Documentation/Makefile ]; then printf "%%:\n\t@:\n" >/home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4/tools/perf/Documentation/GNUmakefile; fi for p in ; do if test -d $p ; then PATH=/home/buildroot/autobuild/instance-1/output-1/host/bin:$PATH support/scripts/apply-patches.sh /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4 $p \*.patch || exit 1 ; else PATH=/home/buildroot/autobuild/instance-1/output-1/host/bin:$PATH support/scripts/apply-patches.sh /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4 `dirname $p` `basename $p` || exit 1; fi done make[1]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4' HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/confdata.o HOSTCC scripts/kconfig/expr.o LEX scripts/kconfig/lexer.lex.c YACC scripts/kconfig/parser.tab.[ch] HOSTCC scripts/kconfig/preprocess.o HOSTCC scripts/kconfig/symbol.o HOSTCC scripts/kconfig/util.o HOSTCC scripts/kconfig/lexer.lex.o HOSTCC scripts/kconfig/parser.tab.o HOSTLD scripts/kconfig/conf *** Default configuration is based on 'mmu_defconfig' # # configuration written to .config # make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4' Using /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4/.config as base # # merged configuration written to /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4/.config (needs make) # make[1]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4' # # No change to .config # make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4' /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo 'CONFIG_MODULES=y' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo 'CONFIG_KERNEL_XZ=y' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo '# CONFIG_KERNEL_GZIP is not set' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo '# CONFIG_KERNEL_LZ4 is not set' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo '# CONFIG_KERNEL_LZMA is not set' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo '# CONFIG_KERNEL_LZO is not set' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo '# CONFIG_KERNEL_ZSTD is not set' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo '# CONFIG_KERNEL_UNCOMPRESSED is not set' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo 'CONFIG_CPU_BIG_ENDIAN=y' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config if grep -q "^CONFIG_DEBUG_INFO_BTF=y" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config; then echo "To use CONFIG_DEBUG_INFO_BTF, enable host-pahole (BR2_LINUX_KERNEL_NEEDS_HOST_PAHOLE)" 1>&2; exit 1; fi # As the kernel gets compiled before root filesystems are # built, we create a fake cpio file. It'll be # replaced later by the real cpio archive, and the kernel will be # rebuilt using the linux-rebuild-with-initramfs target. /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo '# CONFIG_GCC_PLUGINS is not set' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo 'CONFIG_CRYPTO=y' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo 'CONFIG_CRYPTO_USER_API_AEAD=y' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo 'CONFIG_IP_NF_IPTABLES=y' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo 'CONFIG_IP_NF_FILTER=y' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo 'CONFIG_NETFILTER=y' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo 'CONFIG_NETFILTER_XTABLES=y' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo 'CONFIG_FUSE_FS=y' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo 'CONFIG_PERF_EVENTS=y' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo 'CONFIG_IP_MULTICAST=y' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo 'CONFIG_IP_MROUTE=y' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config make[1]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4' .config:2469:warning: override: CPU_BIG_ENDIAN changes choice state # # configuration written to .config # make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4' >>> linux 5.10.109-cip5-rt4 Configuring >>> linux 5.10.109-cip5-rt4 Building /bin/sed -i -e "/\\/d" /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config echo '# CONFIG_GCC_PLUGINS is not set' >> /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4//.config PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PKG_CONFIG="/home/buildroot/autobuild/instance-1/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/autobuild/instance-1/output-1/host/lib/pkgconfig:/home/buildroot/autobuild/instance-1/output-1/host/share/pkgconfig" BR_BINARIES_DIR=/home/buildroot/autobuild/instance-1/output-1/images KCFLAGS=-Wno-attribute-alias /usr/bin/make -j4 HOSTCC="/home/buildroot/autobuild/instance-1/output-1/host/bin/ccache /usr/bin/gcc -O2 -I/home/buildroot/autobuild/instance-1/output-1/host/include -L/home/buildroot/autobuild/instance-1/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-1/output-1/host/lib" ARCH=microblaze INSTALL_MOD_PATH=/home/buildroot/autobuild/instance-1/output-1/target CROSS_COMPILE="/home/buildroot/autobuild/instance-1/output-1/host/bin/microblaze-buildroot-linux-musl-" WERROR=0 DEPMOD=/home/buildroot/autobuild/instance-1/output-1/host/sbin/depmod -C /home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4 all make[1]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4' SYNC include/config/auto.conf.cmd HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/confdata.o HOSTCC scripts/kconfig/expr.o HOSTCC scripts/kconfig/lexer.lex.o HOSTCC scripts/kconfig/parser.tab.o HOSTCC scripts/kconfig/preprocess.o HOSTCC scripts/kconfig/symbol.o HOSTCC scripts/kconfig/util.o HOSTLD scripts/kconfig/conf SYSTBL arch/microblaze/include/generated/asm/syscall_table.h SYSHDR arch/microblaze/include/generated/uapi/asm/unistd_32.h WRAP arch/microblaze/include/generated/uapi/asm/ucontext.h WRAP arch/microblaze/include/generated/uapi/asm/bitsperlong.h WRAP arch/microblaze/include/generated/uapi/asm/bpf_perf_event.h WRAP arch/microblaze/include/generated/uapi/asm/errno.h WRAP arch/microblaze/include/generated/uapi/asm/fcntl.h WRAP arch/microblaze/include/generated/uapi/asm/ioctl.h WRAP arch/microblaze/include/generated/uapi/asm/ioctls.h WRAP arch/microblaze/include/generated/uapi/asm/ipcbuf.h WRAP arch/microblaze/include/generated/uapi/asm/mman.h WRAP arch/microblaze/include/generated/uapi/asm/msgbuf.h WRAP arch/microblaze/include/generated/uapi/asm/param.h HOSTCC scripts/dtc/dtc.o WRAP arch/microblaze/include/generated/uapi/asm/poll.h WRAP arch/microblaze/include/generated/uapi/asm/resource.h WRAP arch/microblaze/include/generated/uapi/asm/sembuf.h WRAP arch/microblaze/include/generated/uapi/asm/shmbuf.h HOSTCC scripts/dtc/flattree.o WRAP arch/microblaze/include/generated/uapi/asm/siginfo.h HOSTCC scripts/dtc/fstree.o WRAP arch/microblaze/include/generated/uapi/asm/signal.h WRAP arch/microblaze/include/generated/uapi/asm/socket.h WRAP arch/microblaze/include/generated/uapi/asm/sockios.h WRAP arch/microblaze/include/generated/uapi/asm/stat.h WRAP arch/microblaze/include/generated/uapi/asm/statfs.h WRAP arch/microblaze/include/generated/uapi/asm/swab.h WRAP arch/microblaze/include/generated/uapi/asm/termbits.h WRAP arch/microblaze/include/generated/uapi/asm/termios.h WRAP arch/microblaze/include/generated/uapi/asm/types.h UPD include/config/kernel.release WRAP arch/microblaze/include/generated/asm/extable.h WRAP arch/microblaze/include/generated/asm/kvm_para.h WRAP arch/microblaze/include/generated/asm/mcs_spinlock.h WRAP arch/microblaze/include/generated/asm/parport.h WRAP arch/microblaze/include/generated/asm/syscalls.h WRAP arch/microblaze/include/generated/asm/tlb.h WRAP arch/microblaze/include/generated/asm/user.h WRAP arch/microblaze/include/generated/asm/bitops.h WRAP arch/microblaze/include/generated/asm/bug.h WRAP arch/microblaze/include/generated/asm/bugs.h WRAP arch/microblaze/include/generated/asm/compat.h WRAP arch/microblaze/include/generated/asm/device.h WRAP arch/microblaze/include/generated/asm/div64.h WRAP arch/microblaze/include/generated/asm/dma-mapping.h WRAP arch/microblaze/include/generated/asm/emergency-restart.h WRAP arch/microblaze/include/generated/asm/exec.h WRAP arch/microblaze/include/generated/asm/fb.h WRAP arch/microblaze/include/generated/asm/hardirq.h WRAP arch/microblaze/include/generated/asm/hw_irq.h WRAP arch/microblaze/include/generated/asm/irq_regs.h WRAP arch/microblaze/include/generated/asm/irq_work.h WRAP arch/microblaze/include/generated/asm/kdebug.h WRAP arch/microblaze/include/generated/asm/kmap_size.h WRAP arch/microblaze/include/generated/asm/kprobes.h WRAP arch/microblaze/include/generated/asm/linkage.h WRAP arch/microblaze/include/generated/asm/local.h WRAP arch/microblaze/include/generated/asm/local64.h WRAP arch/microblaze/include/generated/asm/mm-arch-hooks.h WRAP arch/microblaze/include/generated/asm/mmiowb.h WRAP arch/microblaze/include/generated/asm/module.lds.h WRAP arch/microblaze/include/generated/asm/msi.h WRAP arch/microblaze/include/generated/asm/percpu.h WRAP arch/microblaze/include/generated/asm/preempt.h WRAP arch/microblaze/include/generated/asm/rwonce.h WRAP arch/microblaze/include/generated/asm/serial.h WRAP arch/microblaze/include/generated/asm/shmparam.h WRAP arch/microblaze/include/generated/asm/simd.h WRAP arch/microblaze/include/generated/asm/topology.h WRAP arch/microblaze/include/generated/asm/trace_clock.h WRAP arch/microblaze/include/generated/asm/vermagic.h WRAP arch/microblaze/include/generated/asm/vga.h WRAP arch/microblaze/include/generated/asm/word-at-a-time.h WRAP arch/microblaze/include/generated/asm/xor.h HOSTCC scripts/dtc/data.o UPD include/generated/uapi/linux/version.h HOSTCC scripts/dtc/livetree.o HOSTCC scripts/dtc/treesource.o UPD include/generated/utsrelease.h HOSTCC scripts/dtc/srcpos.o HOSTCC scripts/dtc/checks.o HOSTCC scripts/dtc/util.o LEX scripts/dtc/dtc-lexer.lex.c YACC scripts/dtc/dtc-parser.tab.[ch] HOSTCC scripts/dtc/dtc-lexer.lex.o HOSTCC scripts/dtc/dtc-parser.tab.o HOSTLD scripts/dtc/dtc HOSTCC scripts/kallsyms HOSTCC scripts/sorttable DTC arch/microblaze/boot/dts/system.dtb CC scripts/mod/empty.o HOSTCC scripts/mod/mk_elfconfig CC scripts/mod/devicetable-offsets.s UPD scripts/mod/devicetable-offsets.h MKELF scripts/mod/elfconfig.h HOSTCC scripts/mod/modpost.o HOSTCC scripts/mod/file2alias.o HOSTCC scripts/mod/sumversion.o HOSTLD scripts/mod/modpost CC kernel/bounds.s CALL scripts/atomic/check-atomics.sh UPD include/generated/timeconst.h UPD include/generated/bounds.h CC arch/microblaze/kernel/asm-offsets.s UPD include/generated/asm-offsets.h CALL scripts/checksyscalls.sh CC init/main.o CHK include/generated/compile.h AR usr/built-in.a UPD include/generated/compile.h AS arch/microblaze/kernel/head.o LDS arch/microblaze/kernel/vmlinux.lds CC arch/microblaze/kernel/cpu/cache.o CC arch/microblaze/kernel/cpu/cpuinfo.o CC arch/microblaze/mm/consistent.o CC arch/microblaze/pci/pci-common.o CC arch/microblaze/mm/init.o CC arch/microblaze/kernel/cpu/cpuinfo-pvr-full.o CC arch/microblaze/kernel/cpu/cpuinfo-static.o CC init/do_mounts.o arch/microblaze/mm/init.c:71:2: error: #endif without #if 71 | #endif /* CONFIG_HIGHMEM */ | ^~~~~ scripts/Makefile.build:280: recipe for target 'arch/microblaze/mm/init.o' failed make[2]: *** [arch/microblaze/mm/init.o] Error 1 Makefile:1822: recipe for target 'arch/microblaze/mm' failed make[1]: *** [arch/microblaze/mm] Error 2 make[1]: *** Waiting for unfinished jobs.... CC init/do_mounts_rd.o CC arch/microblaze/kernel/cpu/mb.o CC arch/microblaze/pci/indirect_pci.o CC arch/microblaze/pci/iomap.o CC arch/microblaze/kernel/dma.o CC init/noinitramfs.o CC arch/microblaze/kernel/cpu/pvr.o AR arch/microblaze/kernel/cpu/built-in.a CC init/calibrate.o CC arch/microblaze/kernel/exceptions.o CC arch/microblaze/pci/xilinx_pci.o CC init/init_task.o AS arch/microblaze/kernel/hw_exception_handler.o CC arch/microblaze/kernel/irq.o CC arch/microblaze/kernel/process.o CC arch/microblaze/kernel/prom.o CC init/version.o AR arch/microblaze/pci/built-in.a CC arch/microblaze/kernel/ptrace.o AR init/built-in.a CC arch/microblaze/kernel/reset.o CC arch/microblaze/kernel/setup.o CC arch/microblaze/kernel/signal.o CC arch/microblaze/kernel/sys_microblaze.o CC arch/microblaze/kernel/timer.o CC arch/microblaze/kernel/traps.o CC arch/microblaze/kernel/unwind.o CC arch/microblaze/kernel/microblaze_ksyms.o CC arch/microblaze/kernel/module.o AS arch/microblaze/kernel/misc.o CC arch/microblaze/kernel/kgdb.o AS arch/microblaze/kernel/entry.o AR arch/microblaze/kernel/built-in.a make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4' package/pkg-generic.mk:290: recipe for target '/home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4/.stamp_built' failed make: *** [/home/buildroot/autobuild/instance-1/output-1/build/linux-5.10.109-cip5-rt4/.stamp_built] Error 2 make: Leaving directory '/home/buildroot/autobuild/instance-1/buildroot'