checking for /home/peko/autobuild/instance-1/output/host/arm-buildroot-linux-gnueabi/sysroot/usr/pcap-bpf.h... no
checking for libpcap bpf header... checking for pcapnav-config... no 
checking for requires strict byte alignment... yes
checking for tcpdump... (cached) no
configure: WARNING: Unable to find tcpdump.  Please specify --with-tcpdump.
                 Disabling --verbose
configure: WARNING: Your version of libpcap is too old for --verbose support
checking for 'make test' profile... configure: WARNING: Unable to do tests when cross-compiling
Linux
configure: Using eth0 for 1st test network interface card
configure: Using eth0 for 2nd test network interface card
checking if it's ok to use pcap_findalldevs()... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking sys/mman.h usability... yes
checking sys/mman.h presence... yes
checking for sys/mman.h... yes
checking for sys/param.h... (cached) yes
checking for sys/poll.h... (cached) yes
checking sys/procset.h usability... no
checking sys/procset.h presence... no
checking for sys/procset.h... no
checking for sys/select.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking sys/stropts.h usability... yes
checking sys/stropts.h presence... yes
checking for sys/stropts.h... yes
checking for sys/time.h... (cached) yes
checking sys/un.h usability... yes
checking sys/un.h presence... yes
checking for sys/un.h... yes
checking sys/wait.h usability... yes
checking sys/wait.h presence... yes
checking for sys/wait.h... yes
checking for dlfcn.h... (cached) yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking for fcntl.h... (cached) yes
checking libgen.h usability... yes
checking libgen.h presence... yes
checking for libgen.h... yes
checking for libintl.h... (cached) yes
checking for memory.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking setjmp.h usability... yes
checking setjmp.h presence... yes
checking for setjmp.h... yes
checking for stdbool.h... (cached) yes
checking sysexits.h usability... yes
checking sysexits.h presence... yes
checking for sysexits.h... yes
checking for unistd.h... (cached) yes
checking utime.h usability... yes
checking utime.h presence... yes
checking for utime.h... yes
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking for string.h... (cached) yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking for inttypes.h... (cached) yes
checking for working stdnoreturn.h... yes
checking for runetype.h... no
checking for wchar.h... yes
checking for wchar_t... yes
checking for wint_t... yes
checking for int8_t... yes
checking for uint8_t... yes
checking for int16_t... yes
checking for uint16_t... yes
checking for int32_t... yes
checking for uint32_t... yes
checking for intptr_t... yes
checking for uintptr_t... yes
checking for uint_t... no
checking for pid_t... (cached) yes
checking for size_t... (cached) yes
checking for ptrdiff_t... yes
checking size of char*... 4
checking size of int... 4
checking size of long... 4
checking size of short... 2
checking for pathfind in -lgen... no
checking for gettext in -lintl... no
checking for vprintf... (cached) yes
checking for _doprnt... (cached) no
checking for vfork.h... (cached) no
checking for fork... (cached) yes
checking for vfork... (cached) yes
checking for working fork... (cached) yes
checking for working vfork... (cached) yes
checking for mmap... (cached) yes
checking for canonicalize_file_name... yes
checking for snprintf... (cached) yes
checking for strdup... (cached) yes
checking for strchr... (cached) yes
checking for strrchr... (cached) yes
checking for strsignal... (cached) yes
checking for fchmod... yes
checking for fstat... yes
checking for chmod... yes
checking for a sed that does not truncate output... (cached) /bin/sed
configure: Using supplied libopts tearoff
checking whether a reg expr header is specified... no
checking whether with-libregex was specified... no
checking whether with-libregex-cflags was specified... no
checking whether with-libregex-libs was specified... no
checking whether libregex functions properly... no
checking whether pathfind(3) works... no
checking whether /dev/zero is readable device... crw-rw-rw- 1 root root 1, 5 Oct 14 2015 /dev/zero
checking whether we have a functional realpath(3C)... no
checking whether strftime() works... no
checking whether fopen accepts "b" mode... no
checking whether fopen accepts "t" mode... no
checking whether not wanting optional option args... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating libopts/Makefile
config.status: creating Makefile
config.status: creating doxygen.cfg
config.status: creating lib/Makefile
config.status: creating docs/Makefile
config.status: creating src/Makefile
config.status: creating src/tcpedit/Makefile
config.status: creating src/fragroute/Makefile
config.status: creating src/common/Makefile
config.status: creating src/defines.h
config.status: creating test/Makefile
config.status: creating test/config
config.status: creating scripts/Makefile
config.status: creating src/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6
##########################################################################
             TCPREPLAY Suite Configuration Results (4.2.6)
##########################################################################
libpcap:                    /home/peko/autobuild/instance-1/output/host/arm-buildroot-linux-gnueabi/sysroot/usr (>= 0.9.6)
PF_RING libpcap             no   
libdnet:                    no   
autogen:                    /usr/bin/autogen (autogen (GNU AutoGen) 5.12)
Use libopts tearoff:        yes
64bit counter support:      yes
tcpdump binary path:        no
fragroute support:          no
tcpbridge support:          yes
tcpliveplay support:        yes

Supported Packet Injection Methods (*):
Linux TX_RING:              no
Linux PF_PACKET:            yes
BSD BPF:                    no
libdnet:                    no
pcap_inject:                yes
pcap_sendpacket:            yes **
pcap_netmap                 no
Linux/BSD netmap:           no
Tuntap device support:      yes

* In order of preference; see configure --help to override
** Required for tcpbridge

>>> tcpreplay 4.2.6 Building
PATH="/home/peko/autobuild/instance-1/output/host/bin:/home/peko/autobuild/instance-1/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games"  /usr/bin/make -j6  -C /home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/
make[1]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6'
Making all in scripts
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/scripts'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/scripts'
Making all in lib
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/lib'
  CC       strlcat.o
  CC       strlcpy.o
  AR       libstrl.a
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/lib'
Making all in libopts
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/libopts'
/usr/bin/make  all-am
make[3]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/libopts'
  CC       libopts_la-libopts.lo
In file included from libopts.c:12:0:
nested.c: In function 'optionLoadNested':
autoopts.h:259:40: warning: 'v_len' may be used uninitialized in this function [-Wmaybe-uninitialized]
 #define AGALOC(c, w)          ao_malloc((size_t)c)
                                        ^
In file included from libopts.c:31:0:
nested.c:554:29: note: 'v_len' was declared here
     size_t          nm_len, v_len;
                             ^
  CCLD     libopts.la
libtool: link: warning: `-version-info/-version-number' is ignored for convenience libraries
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/libopts'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/libopts'
Making all in src
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src'
/usr/bin/make  all-recursive
make[3]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src'
Making all in common
make[4]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/common'
/usr/bin/make  all-am
make[5]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/common'
  CC       cidr.o
  CC       err.o
  CC       list.o
  CC       cache.o
  CC       services.o
  CC       get.o
  CC       fakepcap.o
  CC       fakepcapnav.o
  CC       fakepoll.o
  CC       xX.o
  CC       utils.o
  CC       timer.o
  CC       git_version.o
  CC       sendpacket.o
  CC       dlt_names.o
  CC       mac.o
  CC       interface.o
  CC       flows.o
  CC       txring.o
  AR       libcommon.a
make[5]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/common'
make[4]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/common'
Making all in tcpedit
make[4]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/tcpedit'
/usr/bin/make  all-am
make[5]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/tcpedit'
  CC       tcpedit.o
  CC       parse_args.o
  CC       edit_packet.o
  CC       portmap.o
  CC       dlt.o
  CC       checksum.o
  CC       incremental_checksum.o
  CC       tcpedit_api.o
  CC       fuzzing.o
  CC       dlt_plugins.o
  CC       ethernet.o
  CC       dlt_utils.o
  CC       en10mb.o
  CC       en10mb_api.o
  CC       hdlc.o
  CC       hdlc_api.o
  CC       user.o
  CC       user_api.o
  CC       raw.o
  CC       null.o
  CC       loop.o
  CC       linuxsll.o
  CC       ieee80211.o
  CC       ieee80211_hdr.o
  CC       radiotap.o
  CC       jnpr_ether.o
  CC       pppserial.o
  AR       libtcpedit.a
make[5]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/tcpedit'
make[4]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/tcpedit'
make[4]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src'
  CC       tcpreplay-tcpreplay_opts.o
  CC       tcpreplay-send_packets.o
  CC       tcpreplay-signal_handler.o
  CC       tcpreplay-tcpreplay.o
  CC       tcpreplay-tcpreplay_api.o
  CC       tcpreplay-replay.o
  CC       tcpprep-tcpprep_opts.o
  CC       tcpprep-tcpprep.o
  CC       tcpprep-tree.o
  CC       tcpprep-tcpprep_api.o
tcpprep.c: In function 'process_raw_packets':
tcpprep.c:538:62: warning: 'l2len' may be used uninitialized in this function [-Wmaybe-uninitialized]
               check_dst_port(ip_hdr, ip6_hdr, (pkthdr.caplen - l2len)));
                                                              ^
  CC       tcprewrite-tcprewrite_opts.o
  CC       tcprewrite-tcprewrite.o
  CC       tcpreplay_edit-tcpreplay_edit_opts.o
  CC       tcpreplay_edit-send_packets.o
  CC       tcpreplay_edit-signal_handler.o
  CC       tcpreplay_edit-tcpreplay.o
  CC       tcpreplay_edit-tcpreplay_api.o
  CC       tcpreplay_edit-replay.o
  CC       tcpcapinfo-tcpcapinfo_opts.o
  CC       tcpcapinfo-tcpcapinfo.o
  CC       tcpbridge-tcpbridge_opts.o
  CC       tcpbridge-tcpbridge.o
  CC       tcpbridge-bridge.o
  CC       tcpliveplay-tcpliveplay_opts.o
  CC       tcpliveplay-tcpliveplay.o
  CCLD     tcpreplay
  CCLD     tcpprep
  CCLD     tcprewrite
tcpliveplay.c: In function 'do_checksum_liveplay':
tcpliveplay.c:1191:5: warning: 'sum' is used uninitialized in this function [-Wuninitialized]
     sum;
     ^
  CCLD     tcpcapinfo
  CCLD     tcpreplay-edit
  CCLD     tcpbridge
  CCLD     tcpliveplay
make[4]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src'
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src'
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6'
make[2]: Nothing to be done for `all-am'.
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6'
make[1]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6'
>>> tcpreplay 4.2.6 Installing to target
PATH="/home/peko/autobuild/instance-1/output/host/bin:/home/peko/autobuild/instance-1/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games"  /usr/bin/make -j6 DESTDIR=/home/peko/autobuild/instance-1/output/target install -C /home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/
make[1]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6'
Making install in scripts
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/scripts'
make[3]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/scripts'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/scripts'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/scripts'
Making install in lib
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/lib'
make[3]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/lib'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/lib'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/lib'
Making install in libopts
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/libopts'
/usr/bin/make  install-am
make[3]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/libopts'
make[4]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/libopts'
make[4]: Nothing to be done for `install-data-am'.
make[4]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/libopts'
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/libopts'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/libopts'
Making install in src
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src'
/usr/bin/make  install-recursive
make[3]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src'
Making install in common
make[4]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/common'
/usr/bin/make  install-am
make[5]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/common'
make[6]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/common'
make[6]: Nothing to be done for `install-exec-am'.
make[6]: Nothing to be done for `install-data-am'.
make[6]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/common'
make[5]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/common'
make[4]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/common'
Making install in tcpedit
make[4]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/tcpedit'
/usr/bin/make  install-am
make[5]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/tcpedit'
make[6]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/tcpedit'
make[6]: Nothing to be done for `install-exec-am'.
make[6]: Nothing to be done for `install-data-am'.
make[6]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/tcpedit'
make[5]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/tcpedit'
make[4]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src/tcpedit'
make[4]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src'
make[5]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src'
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output/target/usr/bin'
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output/target/usr/share/man/man1'
  /bin/bash ../libtool   --mode=install /usr/bin/install -c tcpreplay tcpprep tcprewrite tcpreplay-edit tcpcapinfo tcpbridge tcpliveplay '/home/peko/autobuild/instance-1/output/target/usr/bin'
 /usr/bin/install -c -m 644 tcpreplay.1 tcpprep.1 tcprewrite.1 tcpreplay-edit.1 tcpcapinfo.1 tcpbridge.1 tcpliveplay.1 '/home/peko/autobuild/instance-1/output/target/usr/share/man/man1'
libtool: install: /usr/bin/install -c tcpreplay /home/peko/autobuild/instance-1/output/target/usr/bin/tcpreplay
libtool: install: /usr/bin/install -c tcpprep /home/peko/autobuild/instance-1/output/target/usr/bin/tcpprep
libtool: install: /usr/bin/install -c tcprewrite /home/peko/autobuild/instance-1/output/target/usr/bin/tcprewrite
libtool: install: /usr/bin/install -c tcpreplay-edit /home/peko/autobuild/instance-1/output/target/usr/bin/tcpreplay-edit
libtool: install: /usr/bin/install -c tcpcapinfo /home/peko/autobuild/instance-1/output/target/usr/bin/tcpcapinfo
libtool: install: /usr/bin/install -c tcpbridge /home/peko/autobuild/instance-1/output/target/usr/bin/tcpbridge
libtool: install: /usr/bin/install -c tcpliveplay /home/peko/autobuild/instance-1/output/target/usr/bin/tcpliveplay
make[5]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src'
make[4]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src'
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6/src'
make[2]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6'
make[3]: Entering directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6'
make[2]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6'
make[1]: Leaving directory `/home/peko/autobuild/instance-1/output/build/tcpreplay-4.2.6'
>>>   Finalizing target directory
# Check files that are touched by more than one package
./support/scripts/check-uniq-files -t target /home/peko/autobuild/instance-1/output/build/packages-file-list.txt
./support/scripts/check-uniq-files -t staging /home/peko/autobuild/instance-1/output/build/packages-file-list-staging.txt
Warning: staging file "./usr/lib/libeXosip2.la" is touched by more than one package: [u'libeXosip2', u'libzlib', u'libpcap']
Warning: staging file "./usr/lib/libosipparser2.la" is touched by more than one package: [u'libosip2', u'libeXosip2', u'libzlib', u'libpcap']
Warning: staging file "./usr/lib/libosip2.la" is touched by more than one package: [u'libosip2', u'libeXosip2', u'libzlib', u'libpcap']
./support/scripts/check-uniq-files -t host /home/peko/autobuild/instance-1/output/build/packages-file-list-host.txt
Warning: host file "./share/info/dir" is touched by more than one package: [u'host-tar', u'host-lzip', u'host-m4', u'host-libtool', u'host-autoconf', u'host-automake', u'host-bison', u'host-gettext']
mkdir -p /home/peko/autobuild/instance-1/output/target/etc
echo "buildroot" > /home/peko/autobuild/instance-1/output/target/etc/hostname
/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/peko/autobuild/instance-1/output/target/etc/hosts
mkdir -p /home/peko/autobuild/instance-1/output/target/etc
echo "Welcome to Buildroot" > /home/peko/autobuild/instance-1/output/target/etc/issue
/bin/sed -i -e s,^root:[^:]*:,root::, /home/peko/autobuild/instance-1/output/target/etc/shadow
rm -f /home/peko/autobuild/instance-1/output/target/bin/sh
rm -f /home/peko/autobuild/instance-1/output/build/locales.nopurge
for i in C en_US locale-archive; do echo $i >> /home/peko/autobuild/instance-1/output/build/locales.nopurge; done
for dir in ; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/peko/autobuild/instance-1/output/build/locales.nopurge || rm -rf $langdir; fi done; done
if [ -d /home/peko/autobuild/instance-1/output/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/peko/autobuild/instance-1/output/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/peko/autobuild/instance-1/output/target/usr/share/X11/locale/locale.dir; fi
rm -rf /home/peko/autobuild/instance-1/output/target/usr/include /home/peko/autobuild/instance-1/output/target/usr/share/aclocal \
		/home/peko/autobuild/instance-1/output/target/usr/lib/pkgconfig /home/peko/autobuild/instance-1/output/target/usr/share/pkgconfig \
		/home/peko/autobuild/instance-1/output/target/usr/lib/cmake /home/peko/autobuild/instance-1/output/target/usr/share/cmake
find /home/peko/autobuild/instance-1/output/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
find /home/peko/autobuild/instance-1/output/target/lib/ /home/peko/autobuild/instance-1/output/target/usr/lib/ /home/peko/autobuild/instance-1/output/target/usr/libexec/ \
		\( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
find: `/home/peko/autobuild/instance-1/output/target/usr/libexec/': No such file or directory
rm -rf /home/peko/autobuild/instance-1/output/target/usr/share/gdb
rm -rf /home/peko/autobuild/instance-1/output/target/usr/share/bash-completion
rm -rf /home/peko/autobuild/instance-1/output/target/usr/share/zsh
rm -rf /home/peko/autobuild/instance-1/output/target/usr/man /home/peko/autobuild/instance-1/output/target/usr/share/man
rm -rf /home/peko/autobuild/instance-1/output/target/usr/info /home/peko/autobuild/instance-1/output/target/usr/share/info
rm -rf /home/peko/autobuild/instance-1/output/target/usr/doc /home/peko/autobuild/instance-1/output/target/usr/share/doc
rm -rf /home/peko/autobuild/instance-1/output/target/usr/share/gtk-doc
rmdir /home/peko/autobuild/instance-1/output/target/usr/share 2>/dev/null || true
find /home/peko/autobuild/instance-1/output/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/peko/autobuild/instance-1/output/host/bin/arm-none-linux-gnueabi-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true
find /home/peko/autobuild/instance-1/output/target/lib/ -type f -name 'libpthread*.so*' | \
		xargs -r /home/peko/autobuild/instance-1/output/host/bin/arm-none-linux-gnueabi-strip --remove-section=.comment --remove-section=.note --strip-debug
find /home/peko/autobuild/instance-1/output/target/lib/ -type f -name 'ld-*.so*' | \
		xargs -r /home/peko/autobuild/instance-1/output/host/bin/arm-none-linux-gnueabi-strip --remove-section=.comment --remove-section=.note --strip-debug
test -f /home/peko/autobuild/instance-1/output/target/etc/ld.so.conf && \
		{ echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
test -d /home/peko/autobuild/instance-1/output/target/etc/ld.so.conf.d && \
		{ echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true
mkdir -p /home/peko/autobuild/instance-1/output/target/etc
( \
		echo "NAME=Buildroot"; \
		echo "VERSION=2018.05-rc1-00098-g8553b39"; \
		echo "ID=buildroot"; \
		echo "VERSION_ID=2018.05-rc1"; \
		echo "PRETTY_NAME=\"Buildroot 2018.05-rc1\"" \
	) >  /home/peko/autobuild/instance-1/output/target/usr/lib/os-release
ln -sf ../usr/lib/os-release /home/peko/autobuild/instance-1/output/target/etc
>>>   Sanitizing RPATH in target tree
/home/peko/autobuild/instance-1/buildroot/support/scripts/fix-rpath target
touch /home/peko/autobuild/instance-1/output/target/usr
make: Leaving directory `/home/peko/autobuild/instance-1/buildroot'
make: Entering directory `/home/peko/autobuild/instance-1/buildroot'
>>>   Buildroot 2018.05-rc1-00098-g8553b39 Collecting legal info
COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4)
>>> toolchain-external  Collecting legal info
>>> host-lzip 1.20 Collecting legal info
COPYING: OK (sha256: 3d77c1a58fbde5ddba612d1fe09965e20a3804953eca12e8c1892298bb8a5eef)
>>> host-skeleton  Collecting legal info
>>> host-tar 1.29 Collecting legal info
ERROR: No hash found for COPYING
>>> skeleton  Collecting legal info
>>> skeleton-init-none  Collecting legal info
>>> skeleton-init-common  Collecting legal info
PATH="/home/peko/autobuild/instance-1/output/host/bin:/home/peko/autobuild/instance-1/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" BR2_DL_DIR=/home/peko/autobuild/instance-1/dl BUILD_DIR=/home/peko/autobuild/instance-1/output/build O=/home/peko/autobuild/instance-1/output flock /home/peko/autobuild/instance-1/dl/toolchain-external-codesourcery-arm/ support/download/dl-wrapper -c '2014.05-29' -d '/home/peko/autobuild/instance-1/dl/toolchain-external-codesourcery-arm' -D '/home/peko/autobuild/instance-1/dl' -f 'arm-2014.05-29-arm-none-linux-gnueabi.src.tar.bz2' -H 'toolchain/toolchain-external/toolchain-external-codesourcery-arm//toolchain-external-codesourcery-arm.hash' -n 'toolchain-external-codesourcery-arm-2014.05-29' -N 'toolchain-external-codesourcery-arm' -o '/home/peko/autobuild/instance-1/dl/toolchain-external-codesourcery-arm/arm-2014.05-29-arm-none-linux-gnueabi.src.tar.bz2'  -u https://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi -u http\|urlencode+http://sources.buildroot.net/toolchain-external-codesourcery-arm -u http\|urlencode+http://sources.buildroot.net  -- 
arm-2014.05-29-arm-none-linux-gnueabi.src.tar.bz2: OK (sha256: e16a5b1e41d7ff1e74161f9405182001bc8d1360d89564e73911032e6966cc0d)
>>> toolchain-external-codesourcery-arm 2014.05-29 Collecting legal info
>>> toolchain  Collecting legal info
>>> am33x-cm3 11107db2f1e9e58ee75d4fe9cc38423c9a6e4365 Collecting legal info
ERROR: No hash found for License.txt
>>> devmem2 1 Collecting legal info
devmem2.c.license: OK (sha256: 560913d09310d446920c16bd0aca1ff21d3b6fedd527195bacfc832ce343e0ae)
>>> fbdump 0.4.2 Collecting legal info
ERROR: No hash found for COPYING
>>> libeXosip2 3.6.0 Collecting legal info
COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670)
>>> host-autoconf 2.69 Collecting legal info
ERROR: No hash found for COPYINGv3
ERROR: No hash found for COPYING.EXCEPTION
>>> host-libtool 2.4.6 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> host-m4 1.4.18 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-automake 1.15.1 Collecting legal info
COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6)
>>> host-pkgconf 0.9.12 Collecting legal info
ERROR: No hash found for COPYING
>>> libosip2 3.6.0 Collecting legal info
COPYING: OK (sha256: 8d9e95ed0e48df46dc758eb0d86df611f771eab4eed94bebb77dca87f1c897de)
>>> libpcap 1.8.1 Collecting legal info
LICENSE: OK (sha256: 8a54594d257e14a5260ac770f1633516cb51e3fc28c40136ce2697014eda7afd)
>>> host-bison 3.0.4 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-flex 2.6.4 Collecting legal info
COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273)
>>> host-gettext 0.19.8.1 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
ERROR: No hash found for gettext-runtime/intl/COPYING.LIB
>>> host-libxml2 2.9.7 Collecting legal info
COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd)
>>> zlib  Collecting legal info
>>> libzlib 1.2.11 Collecting legal info
README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15)
>>> mii-diag 2.11 Collecting legal info
ERROR: No hash found for mii-diag.c
>>> host-patchelf 0.9 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> tcpreplay 4.2.6 Collecting legal info
ERROR: No hash found for docs/LICENSE
WARNING: the Buildroot source code has not been saved
WARNING: toolchain-external-codesourcery-arm-2014.05-29: cannot save license (TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM_LICENSE_FILES not defined)
Legal info produced in /home/peko/autobuild/instance-1/output/legal-info
make: Leaving directory `/home/peko/autobuild/instance-1/buildroot'