>>> host-binutils 2.37 Extracting
xzcat /home/buildroot/autobuild/instance-3/dl/binutils/binutils-2.37.tar.xz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37   -xf -
>>> host-binutils 2.37 Patching

Applying 0001-sh-conf.patch using patch: 
patching file configure
patching file configure.ac

Applying 0002-poison-system-directories.patch using patch: 
patching file ld/config.in
patching file ld/configure
patching file ld/configure.ac
patching file ld/ld.h
patching file ld/ld.texi
patching file ld/ldfile.c
patching file ld/ldlex.h
patching file ld/ldmain.c
patching file ld/lexsup.c

Applying 0003-bfd-elf32-or1k-fix-building-with-gcc-version-5.patch using patch: 
patching file bfd/elf32-or1k.c

Applying 0004-or1k-fix-pc-relative-relocation-against-dynamic-on-P.patch using patch: 
patching file bfd/elf32-or1k.c

Applying 0005-or1k-Avoid-R_OR1K_GOT16-signed-overflow-by-using-spe.patch using patch: 
patching file bfd/elf32-or1k.c

Applying 0006-bfd-Close-the-file-descriptor-if-there-is-no-archive.patch using patch: 
patching file bfd/plugin.c
patching file ld/testsuite/ld-plugin/lto.exp
patching file ld/testsuite/ld-plugin/pr28138-1.c
patching file ld/testsuite/ld-plugin/pr28138-2.c
patching file ld/testsuite/ld-plugin/pr28138-3.c
patching file ld/testsuite/ld-plugin/pr28138-4.c
patching file ld/testsuite/ld-plugin/pr28138-5.c
patching file ld/testsuite/ld-plugin/pr28138-6.c
patching file ld/testsuite/ld-plugin/pr28138-7.c
patching file ld/testsuite/ld-plugin/pr28138.c

Applying 0007-i386-Allow-GOT32-relocations-against-ABS-symbols.patch using patch: 
patching file bfd/elfxx-x86.c
Hunk #1 succeeded at 933 (offset -1009 lines).
Hunk #2 succeeded at 956 (offset -1009 lines).
>>> host-binutils 2.37 Updating config.sub and config.guess
for file in config.guess config.sub; do for i in $(find /home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37 -name $file); do cp support/gnuconfig/$file $i; done; done
>>> host-binutils 2.37 Patching libtool
patching file /home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/ltmain.sh
Hunk #1 succeeded at 1225 (offset 11 lines).
Hunk #2 succeeded at 2250 (offset 11 lines).
Hunk #3 succeeded at 4318 (offset -114 lines).
Hunk #4 succeeded at 4328 (offset -114 lines).
Hunk #5 succeeded at 4610 (offset -114 lines).
Hunk #6 succeeded at 4883 (offset -111 lines).
Hunk #7 succeeded at 5627 (offset -111 lines).
Hunk #8 succeeded at 5785 (offset -111 lines).
Hunk #9 succeeded at 8269 (offset -109 lines).
>>> host-binutils 2.37 Configuring
(cd /home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/ && rm -rf config.cache; PATH="/home/buildroot/autobuild/instance-3/output-1/host/bin:/home/buildroot/autobuild/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PKG_CONFIG="/home/buildroot/autobuild/instance-3/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/autobuild/instance-3/output-1/host/lib/pkgconfig:/home/buildroot/autobuild/instance-3/output-1/host/share/pkgconfig" AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld" NM="/usr/bin/nm" CC="/usr/bin/gcc" GCC="/usr/bin/gcc" CXX="/usr/bin/g++" CPP="/usr/bin/cpp" OBJCOPY="/usr/bin/objcopy" RANLIB="/usr/bin/ranlib" CPPFLAGS="-I/home/buildroot/autobuild/instance-3/output-1/host/include" CFLAGS="-O2 -I/home/buildroot/autobuild/instance-3/output-1/host/include" CXXFLAGS="-O2 -I/home/buildroot/autobuild/instance-3/output-1/host/include" LDFLAGS="-L/home/buildroot/autobuild/instance-3/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-3/output-1/host/lib" INTLTOOL_PERL=/usr/bin/perl CFLAGS="-O2 -I/home/buildroot/autobuild/instance-3/output-1/host/include" LDFLAGS="-L/home/buildroot/autobuild/instance-3/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-3/output-1/host/lib" MAKEINFO=true CONFIG_SITE=/dev/null ./configure --prefix="/home/buildroot/autobuild/instance-3/output-1/host" --sysconfdir="/home/buildroot/autobuild/instance-3/output-1/host/etc" --localstatedir="/home/buildroot/autobuild/instance-3/output-1/host/var" --enable-shared --disable-static --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --disable-debug --with-xmlto=no --with-fop=no --disable-nls --disable-dependency-tracking  --disable-multilib --disable-werror --target=or1k-buildroot-linux-uclibc --disable-shared --enable-static --with-sysroot=/home/buildroot/autobuild/instance-3/output-1/host/or1k-buildroot-linux-uclibc/sysroot --enable-poison-system-directories --without-debuginfod --disable-sim --disable-gdb  )
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking target system type... or1k-buildroot-linux-uclibc
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln works... yes
checking whether ln -s works... yes
checking for a sed that does not truncate output... /bin/sed
checking for gawk... gawk
checking for gcc... /usr/bin/gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /usr/bin/gcc accepts -g... yes
checking for /usr/bin/gcc option to accept ISO C89... none needed
checking for /usr/bin/gcc option to accept ISO C99... none needed
checking whether we are using the GNU C++ compiler... yes
checking whether /usr/bin/g++ accepts -g... yes
checking whether g++ accepts -static-libstdc++ -static-libgcc... yes
checking for gnatbind... no
checking for gnatmake... no
checking whether compiler driver understands Ada... no
checking how to compare bootstrapped objects... cmp --ignore-initial=16 $$f1 $$f2
checking for objdir... .libs
checking for isl 0.15 or later... no
required isl version is 0.15 or later
checking for default BUILD_CONFIG... 
checking for --enable-vtable-verify... no
checking for bison... no
checking for byacc... no
checking for yacc... no
checking for bison... no
checking for gm4... no
checking for gnum4... no
checking for m4... no
checking for flex... no
checking for lex... no
checking for flex... no
checking for makeinfo... true
checking for expect... expect
checking for runtest... no
checking for ar... (cached) /usr/bin/ar
checking for as... (cached) /usr/bin/as
checking for dlltool... no
checking for ld... (cached) /usr/bin/ld
checking for lipo... no
checking for nm... (cached) /usr/bin/nm
checking for ranlib... (cached) /usr/bin/ranlib
checking for strip... strip
checking for windres... no
checking for windmc... no
checking for objcopy... (cached) /usr/bin/objcopy
checking for objdump... objdump
checking for readelf... readelf
checking for -plugin option... /usr/bin/ar: no operation specified
configure: WARNING: Failed: /usr/bin/ar --plugin /usr/lib/gcc/x86_64-linux-gnu/6/liblto_plugin.so rc
no
checking for or1k-buildroot-linux-uclibc-cc... no
checking for or1k-buildroot-linux-uclibc-gcc... no
checking for or1k-buildroot-linux-uclibc-c++... no
checking for or1k-buildroot-linux-uclibc-g++... no
checking for or1k-buildroot-linux-uclibc-cxx... no
checking for or1k-buildroot-linux-uclibc-gxx... no
checking for or1k-buildroot-linux-uclibc-gcc... no
checking for or1k-buildroot-linux-uclibc-gfortran... no
checking for or1k-buildroot-linux-uclibc-gccgo... no
checking for or1k-buildroot-linux-uclibc-ar... no
checking for or1k-buildroot-linux-uclibc-as... no
checking for or1k-buildroot-linux-uclibc-dlltool... no
checking for or1k-buildroot-linux-uclibc-ld... no
checking for or1k-buildroot-linux-uclibc-lipo... no
checking for or1k-buildroot-linux-uclibc-nm... no
checking for or1k-buildroot-linux-uclibc-objcopy... no
checking for or1k-buildroot-linux-uclibc-objdump... no
checking for or1k-buildroot-linux-uclibc-ranlib... no
checking for or1k-buildroot-linux-uclibc-readelf... no
checking for or1k-buildroot-linux-uclibc-strip... no
checking for or1k-buildroot-linux-uclibc-windres... no
checking for or1k-buildroot-linux-uclibc-windmc... no
checking where to find the target ar... just compiled
checking where to find the target as... just compiled
checking where to find the target cc... pre-installed
checking where to find the target c++... pre-installed
checking where to find the target c++ for libstdc++... pre-installed
checking where to find the target dlltool... just compiled
checking where to find the target gcc... pre-installed
checking where to find the target gfortran... pre-installed
checking where to find the target gccgo... pre-installed
checking where to find the target ld... just compiled
checking where to find the target lipo... pre-installed
checking where to find the target nm... just compiled
checking where to find the target objcopy... just compiled
checking where to find the target objdump... just compiled
checking where to find the target ranlib... just compiled
checking where to find the target readelf... just compiled
checking where to find the target strip... just compiled
checking where to find the target windres... just compiled
checking where to find the target windmc... just compiled
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
>>> host-binutils 2.37 Building
PATH="/home/buildroot/autobuild/instance-3/output-1/host/bin:/home/buildroot/autobuild/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PKG_CONFIG="/home/buildroot/autobuild/instance-3/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/autobuild/instance-3/output-1/host/lib/pkgconfig:/home/buildroot/autobuild/instance-3/output-1/host/share/pkgconfig"  /usr/bin/make -j4 MAKEINFO=true -C /home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/
make[1]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37'
make[2]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37'
make[2]: Nothing to be done for 'all-target'.
Configuring in ./intl
Configuring in ./libiberty
Configuring in ./zlib
Configuring in ./etc
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/zlib/configure: line 2101: cannot create temp file for here-document: No space left on device
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/intl/configure: line 2087: cannot create temp file for here-document: No space left on device
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/etc/configure: line 1541: cannot create temp file for here-document: No space left on device
configure: creating cache ./config.cache
configure: creating cache ./config.cache
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/libiberty/configure: line 2319: cannot create temp file for here-document: No space left on device
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/libiberty/configure: line 2323: cannot create temp file for here-document: No space left on device
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/etc/configure: line 1549: cannot create temp file for here-document: No space left on device
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/libiberty/configure: line 2327: cannot create temp file for here-document: No space left on device
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/etc/configure: line 1553: cannot create temp file for here-document: No space left on device
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/libiberty/configure: line 2331: cannot create temp file for here-document: No space left on device
configure: creating cache ./config.cache
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/libiberty/configure: line 2335: cannot create temp file for here-document: No space left on device
checking for x86_64-pc-linux-gnu-gcc... /usr/bin/gcc
configure: creating cache ./config.cache
checking for a BSD-compatible install... /usr/bin/install -c
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/etc/configure: line 1822: cannot create temp file for here-document: No space left on device
checking whether to enable maintainer-specific portions of Makefiles... no
checking for makeinfo... true --split-size=5000000
checking for perl... /usr/bin/perl
configure: error: cannot run /bin/bash ./../config.sub
configure: error: cannot run /bin/bash ./../config.sub
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/intl/configure: line 2544: cannot create temp file for here-document: No space left on device
checking whether the C compiler works... configure: updating cache ./config.cache
no
configure: creating ./config.status
sed: can't read conftest.c: No such file or directory
configure: error: in `/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/intl':
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/etc/configure: line 1975: cannot create temp file for here-document: No space left on device
configure: error: C compiler cannot create executables
See `config.log' for more details
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/etc/configure: line 1989: cannot create temp file for here-document: No space left on device
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/etc/configure: line 2359: cannot create temp file for here-document: No space left on device
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/etc/configure: line 2384: cannot create temp file for here-document: No space left on device
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/etc/configure: line 2390: cannot create temp file for here-document: No space left on device
Makefile:9104: recipe for target 'configure-zlib' failed
make[2]: *** [configure-zlib] Error 1
make[2]: *** Waiting for unfinished jobs....
Makefile:8091: recipe for target 'configure-libiberty' failed
make[2]: *** [configure-libiberty] Error 1
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/etc/configure: line 2414: cannot create temp file for here-document: No space left on device
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/etc/configure: line 2431: cannot create temp file for here-document: No space left on device
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/etc/configure: line 2497: cannot create temp file for here-document: No space left on device
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/etc/configure: line 2508: cannot create temp file for here-document: No space left on device
/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/etc/configure: line 2522: cannot create temp file for here-document: No space left on device
./conf12241subs.sh: line 1: cannot create temp file for here-document: No space left on device
configure: error: could not make ./config.status
Makefile:6643: recipe for target 'configure-intl' failed
make[2]: *** [configure-intl] Error 1
Makefile:4289: recipe for target 'configure-etc' failed
make[2]: *** [configure-etc] Error 1
make[2]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37'
Makefile:902: recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37'
package/pkg-generic.mk:290: recipe for target '/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/.stamp_built' failed
make: *** [/home/buildroot/autobuild/instance-3/output-1/build/host-binutils-2.37/.stamp_built] Error 2
make: Leaving directory '/home/buildroot/autobuild/instance-3/buildroot'