>>> libmad 0.15.1b Extracting gzip -d -c /home/buildroot/autobuild/instance-1/dl/libmad/libmad_0.15.1b.orig.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b -xf - >>> libmad 0.15.1b Patching PATH=/home/buildroot/autobuild/instance-1/output-1/host/bin:$PATH support/scripts/apply-patches.sh /home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b /home/buildroot/autobuild/instance-1/dl/libmad libmad_0.15.1b-10.diff.gz Applying libmad_0.15.1b-10.diff.gz using gzip: patching file debian/changelog patching file debian/compat patching file debian/control patching file debian/copyright patching file debian/libmad0-dev.dirs patching file debian/libmad0-dev.docs patching file debian/libmad0-dev.examples patching file debian/libmad0-dev.files patching file debian/libmad0-dev.install patching file debian/libmad0.dirs patching file debian/libmad0.docs patching file debian/libmad0.files patching file debian/libmad0.install patching file debian/mad.pc patching file debian/patches/Provide-Thumb-2-alternative-code-for-MAD_F_MLN.diff patching file debian/patches/amd64-64bit.diff patching file debian/patches/length-check.patch patching file debian/patches/libmad.thumb.diff patching file debian/patches/md_size.diff patching file debian/patches/mips-gcc4.4.diff patching file debian/patches/optimize.diff patching file debian/patches/series patching file debian/rules patching file debian/upstream/signing-key.asc patching file debian/watch Applying 0001-mips-h-constraint-removal.patch using patch: patching file fixed.h patching file mad.h Applying 0002-configure-ac-automake-foreign.patch using patch: patching file configure.ac if [ -d /home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b/debian/patches ]; then PATH=/home/buildroot/autobuild/instance-1/output-1/host/bin:$PATH support/scripts/apply-patches.sh /home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b /home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b/debian/patches *.patch; fi Applying optimize.diff using series: patching file configure.ac Applying amd64-64bit.diff using series: patching file configure.ac Applying Provide-Thumb-2-alternative-code-for-MAD_F_MLN.diff using series: patching file fixed.h Applying libmad.thumb.diff using series: patching file imdct_l_arm.S Applying mips-gcc4.4.diff using series: patching file fixed.h Hunk #1 succeeded at 310 with fuzz 1 (offset 13 lines). Applying md_size.diff using series: patching file layer3.c Applying length-check.patch using series: patching file bit.c patching file frame.c patching file layer12.c patching file layer3.c >>> libmad 0.15.1b Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b -name $file); do cp support/gnuconfig/$file $i; done; done >>> libmad 0.15.1b Configuring >>> libmad 0.15.1b Autoreconfiguring libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, libtoolize: and rerunning libtoolize and aclocal. libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. configure.ac:31: warning: 'AM_CONFIG_HEADER': this macro is obsolete. configure.ac:31: You should use the 'AC_CONFIG_HEADERS' macro instead. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... aclocal.m4:9794: AM_CONFIG_HEADER is expanded from... configure.ac:31: the top level configure.ac:65: warning: The macro `AC_PROG_LIBTOOL' is obsolete. configure.ac:65: You should run autoupdate. aclocal.m4:121: AC_PROG_LIBTOOL is expanded from... configure.ac:65: the top level configure.ac:143: warning: The macro `AC_HEADER_STDC' is obsolete. configure.ac:143: You should run autoupdate. ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... configure.ac:143: the top level configure.ac:174: warning: The macro `AC_HELP_STRING' is obsolete. configure.ac:174: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... configure.ac:174: the top level configure.ac:186: warning: The macro `AC_HELP_STRING' is obsolete. configure.ac:186: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... configure.ac:186: the top level configure.ac:211: warning: The macro `AC_HELP_STRING' is obsolete. configure.ac:211: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... configure.ac:211: the top level configure.ac:254: warning: The macro `AC_HELP_STRING' is obsolete. configure.ac:254: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... configure.ac:254: the top level configure.ac:265: warning: The macro `AC_HELP_STRING' is obsolete. configure.ac:265: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... configure.ac:265: the top level configure.ac:291: warning: The macro `AC_HELP_STRING' is obsolete. configure.ac:291: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... configure.ac:291: the top level configure.ac:306: warning: The macro `AC_HELP_STRING' is obsolete. configure.ac:306: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... configure.ac:306: the top level configure.ac:316: warning: The macro `AC_HELP_STRING' is obsolete. configure.ac:316: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... configure.ac:316: the top level configure.ac:318: warning: The macro `AC_HELP_STRING' is obsolete. configure.ac:318: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... configure.ac:318: the top level configure.ac:346: warning: The macro `AC_HELP_STRING' is obsolete. configure.ac:346: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... configure.ac:346: the top level configure.ac:39: installing './compile' configure.ac:29: installing './missing' Makefile.am:57: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Makefile.am: installing './depcomp' >>> libmad 0.15.1b Patching libtool patching file /home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b/ltmain.sh Hunk #1 succeeded at 2694 (offset 7 lines). Hunk #2 succeeded at 4284 (offset 7 lines). Hunk #3 succeeded at 6579 (offset 25 lines). Hunk #4 succeeded at 6589 (offset 25 lines). Hunk #5 succeeded at 6882 (offset 25 lines). Hunk #6 succeeded at 7174 (offset 25 lines). Hunk #7 succeeded at 8140 (offset 28 lines). Hunk #8 succeeded at 10769 (offset 59 lines). (cd /home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b/ && rm -rf config.cache && PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" AR="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc-ar" AS="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-as" LD="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-ld" NM="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc-nm" CC="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc" GCC="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc" CPP="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-cpp" CXX="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-g++" FC="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gfortran" F77="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gfortran" RANLIB="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc-ranlib" READELF="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-readelf" STRIP="/bin/true" OBJCOPY="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-objcopy" OBJDUMP="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/instance-1/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-1/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-1/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/instance-1/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-1/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-as" DEFAULT_LINKER="/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 " LDFLAGS="" FCFLAGS=" -Ofast -g0" FFLAGS=" -Ofast -g0" PKG_CONFIG="/home/buildroot/autobuild/instance-1/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-linux-musleabi/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CONFIG_SITE=/dev/null ./configure --target=arm-buildroot-linux-musleabi --host=arm-buildroot-linux-musleabi --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --enable-nls --disable-static --enable-shared --disable-debugging --enable-speed --disable-sso --disable-aso --disable-strict-iso ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --enable-nls checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-buildroot-linux-musleabi-strip... /bin/true checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking build system type... x86_64-pc-linux-gnu checking host system type... arm-buildroot-linux-musleabi checking for arm-buildroot-linux-musleabi-gcc... /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc accepts -g... yes checking for /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc option to enable C11 features... none needed checking whether /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc... none checking dependency style of /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc... none checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc... /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-ld checking if the linker (/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc-nm checking the name lister (/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to arm-buildroot-linux-musleabi format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-ld option to reload object files... -r checking for arm-buildroot-linux-musleabi-objdump... /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-objdump checking how to recognize dependent libraries... pass_all checking for arm-buildroot-linux-musleabi-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for arm-buildroot-linux-musleabi-ar... /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc-ar checking for archiver @FILE support... @ checking for arm-buildroot-linux-musleabi-strip... (cached) /bin/true checking for arm-buildroot-linux-musleabi-ranlib... /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc-ranlib checking command to parse /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc-nm output from /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for arm-buildroot-linux-musleabi-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc supports -fno-rtti -fno-exceptions... no checking for /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc option to produce PIC... -fPIC -DPIC checking if /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc PIC flag -fPIC -DPIC works... yes checking if /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc static flag -static works... yes checking if /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc supports -c -o file.o... yes checking if /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc supports -c -o file.o... (cached) yes checking whether the /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc linker (/home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for egrep... (cached) /bin/grep -E checking for sys/wait.h that is POSIX.1 compatible... yes checking for assert.h... yes checking for limits.h... yes checking for unistd.h... (cached) yes checking for sys/types.h... (cached) yes checking for fcntl.h... yes checking for errno.h... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking whether byte ordering is bigendian... (cached) no checking for pid_t... yes checking size of int... 4 checking size of long... 4 checking size of long long... 8 checking for waitpid... yes checking for fcntl... yes checking for pipe... yes checking for fork... yes checking whether to optimize for speed or for accuracy... speed checking for architecture-specific fixed-point math routines... ARM checking for ISO/IEC interpretation... best accepted practices checking whether to enable profiling... no checking whether to enable debugging... no checking whether to enable experimental code... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating msvc++/Makefile config.status: creating libmad.list config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --enable-nls >>> libmad 0.15.1b Building PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b/ make[1]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b' (sed -e '1s|.*|/*|' -e '1b' -e '$s|.*| */|' -e '$b' \ -e 's/^.*/ *&/' ./COPYRIGHT; echo; \ echo "# ifdef __cplusplus"; \ echo 'extern "C" {'; \ echo "# endif"; echo; \ if [ ".-DFPM_ARM" != "." ]; then \ echo ".-DFPM_ARM" | sed -e 's|^\.-D|# define |'; echo; \ fi; \ sed -ne 's/^# *define *\(HAVE_.*_ASM\).*/# define \1/p' \ config.h; echo; \ sed -ne 's/^# *define *OPT_\(SPEED\|ACCURACY\).*/# define OPT_\1/p' \ config.h; echo; \ sed -ne 's/^# *define *\(SIZEOF_.*\)/# define \1/p' \ config.h; echo; \ for header in version.h fixed.h bit.h timer.h stream.h frame.h synth.h decoder.h; do \ echo; \ sed -n -f ./mad.h.sed ./$header; \ done; echo; \ echo "# ifdef __cplusplus"; \ echo '}'; \ echo "# endif") >mad.h /usr/bin/make all-recursive make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b' /bin/bash ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c -o version.lo version.c /bin/bash ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c -o fixed.lo fixed.c /bin/bash ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c -o bit.lo bit.c /bin/bash ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c -o timer.lo timer.c libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c timer.c -fPIC -DPIC -o .libs/timer.o libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c bit.c -fPIC -DPIC -o .libs/bit.o libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c version.c -fPIC -DPIC -o .libs/version.o libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c fixed.c -fPIC -DPIC -o .libs/fixed.o /bin/bash ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c -o stream.lo stream.c /bin/bash ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c -o frame.lo frame.c /bin/bash ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c -o synth.lo synth.c libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c stream.c -fPIC -DPIC -o .libs/stream.o /bin/bash ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c -o decoder.lo decoder.c libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c frame.c -fPIC -DPIC -o .libs/frame.o /bin/bash ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c -o layer12.lo layer12.c libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c synth.c -fPIC -DPIC -o .libs/synth.o libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c decoder.c -fPIC -DPIC -o .libs/decoder.o libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c layer12.c -fPIC -DPIC -o .libs/layer12.o /bin/bash ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c -o layer3.lo layer3.c /bin/bash ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c -o huffman.lo huffman.c libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c layer3.c -fPIC -DPIC -o .libs/layer3.o libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/arm-buildroot-linux-musleabi-gcc -DHAVE_CONFIG_H -I. -DFPM_ARM -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g0 -O2 -fomit-frame-pointer -c huffman.c -fPIC -DPIC -o .libs/huffman.o /tmp/ccdIhrzP.s: Assembler messages: /tmp/ccdIhrzP.s:93: Error: selected processor does not support `smull r6,r7,r3,r1' in Thumb mode /tmp/ccdIhrzP.s:94: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r6,r6,lsr#28' /tmp/ccdIhrzP.s:95: Error: unshifted register required -- `adc r3,r6,r7,lsl#4' /tmp/ccdIhrzP.s:247: Error: selected processor does not support `smull r2,r1,r0,r3' in Thumb mode /tmp/ccdIhrzP.s:248: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28' /tmp/ccdIhrzP.s:249: Error: unshifted register required -- `adc r0,r2,r1,lsl#4' /tmp/ccdIhrzP.s:613: Error: selected processor does not support `smull r2,r1,r0,r3' in Thumb mode /tmp/ccdIhrzP.s:614: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28' /tmp/ccdIhrzP.s:615: Error: unshifted register required -- `adc r3,r2,r1,lsl#4' /tmp/ccdIhrzP.s:691: Error: selected processor does not support `smull r2,r1,r0,r3' in Thumb mode /tmp/ccdIhrzP.s:692: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28' /tmp/ccdIhrzP.s:693: Error: unshifted register required -- `adc r3,r2,r1,lsl#4' /tmp/ccdIhrzP.s:708: Error: selected processor does not support `smull r2,r1,r0,r3' in Thumb mode /tmp/ccdIhrzP.s:709: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28' /tmp/ccdIhrzP.s:710: Error: unshifted register required -- `adc r0,r2,r1,lsl#4' /tmp/ccdIhrzP.s:1419: Error: selected processor does not support `smull ip,fp,r3,r0' in Thumb mode /tmp/ccdIhrzP.s:1420: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28' /tmp/ccdIhrzP.s:1421: Error: unshifted register required -- `adc r3,ip,fp,lsl#4' /tmp/ccdIhrzP.s:1604: Error: selected processor does not support `smull r10,fp,r3,ip' in Thumb mode /tmp/ccdIhrzP.s:1605: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r10,r10,lsr#28' /tmp/ccdIhrzP.s:1606: Error: unshifted register required -- `adc r3,r10,fp,lsl#4' Makefile:617: recipe for target 'layer12.lo' failed make[3]: *** [layer12.lo] Error 1 make[3]: *** Waiting for unfinished jobs.... /tmp/ccfQgnEB.s: Assembler messages: /tmp/ccfQgnEB.s:42: Error: selected processor does not support `smull r5,r2,r1,r4' in Thumb mode /tmp/ccfQgnEB.s:53: Error: selected processor does not support `smull r7,r5,r1,r6' in Thumb mode /tmp/ccfQgnEB.s:66: Error: selected processor does not support `smull r6,r5,r2,r1' in Thumb mode /tmp/ccfQgnEB.s:69: Error: selected processor does not support `smull r4,r2,r3,r1' in Thumb mode /tmp/ccfQgnEB.s:84: Error: selected processor does not support `smull r4,r5,r3,r1' in Thumb mode /tmp/ccfQgnEB.s:97: Error: selected processor does not support `smull r7,r3,r1,r6' in Thumb mode /tmp/ccfQgnEB.s:108: Error: selected processor does not support `smull r6,r5,r3,r1' in Thumb mode /tmp/ccfQgnEB.s:118: Error: selected processor does not support `smull r4,r3,r2,r1' in Thumb mode /tmp/ccfQgnEB.s:131: Error: selected processor does not support `smull r4,r5,r3,r1' in Thumb mode /tmp/ccfQgnEB.s:144: Error: selected processor does not support `smull r7,r3,r1,r6' in Thumb mode /tmp/ccfQgnEB.s:155: Error: selected processor does not support `smull r6,r5,r3,r1' in Thumb mode /tmp/ccfQgnEB.s:165: Error: selected processor does not support `smull r4,r3,r2,r1' in Thumb mode /tmp/ccfQgnEB.s:179: Error: selected processor does not support `smull r4,r5,r3,r1' in Thumb mode /tmp/ccfQgnEB.s:191: Error: selected processor does not support `smull r7,r3,r4,r6' in Thumb mode /tmp/ccfQgnEB.s:201: Error: selected processor does not support `smull r6,r5,r3,r4' in Thumb mode /tmp/ccfQgnEB.s:211: Error: selected processor does not support `smull r1,r3,r2,r4' in Thumb mode /tmp/ccfQgnEB.s:225: Error: selected processor does not support `smull r4,r5,r3,r1' in Thumb mode /tmp/ccfQgnEB.s:238: Error: selected processor does not support `smull r7,r3,r4,r6' in Thumb mode /tmp/ccfQgnEB.s:249: Error: selected processor does not support `smull r6,r5,r3,r4' in Thumb mode /tmp/ccfQgnEB.s:259: Error: selected processor does not support `smull r1,r3,r2,r4' in Thumb mode /tmp/ccfQgnEB.s:273: Error: selected processor does not support `smull r4,r6,r3,r1' in Thumb mode /tmp/ccfQgnEB.s:284: Error: selected processor does not support `smull ip,r3,r4,r7' in Thumb mode /tmp/ccfQgnEB.s:295: Error: selected processor does not support `smull r7,r6,r3,r4' in Thumb mode /tmp/ccfQgnEB.s:305: Error: selected processor does not support `smull r1,r3,r2,r4' in Thumb mode /tmp/ccfQgnEB.s:319: Error: selected processor does not support `smull r6,r4,r3,r1' in Thumb mode /tmp/ccfQgnEB.s:331: Error: selected processor does not support `smull r9,r3,r1,r7' in Thumb mode /tmp/ccfQgnEB.s:341: Error: selected processor does not support `smull r9,r4,r3,r7' in Thumb mode /tmp/ccfQgnEB.s:351: Error: selected processor does not support `smull r6,r3,r2,r7' in Thumb mode /tmp/ccfQgnEB.s:363: Error: selected processor does not support `smull r10,r9,r2,r7' in Thumb mode /tmp/ccfQgnEB.s:379: Error: selected processor does not support `smull fp,r2,r0,r7' in Thumb mode /tmp/ccfQgnEB.s:394: Error: selected processor does not support `smull r9,r0,r2,fp' in Thumb mode /tmp/ccfQgnEB.s:406: Error: selected processor does not support `smull r10,r2,r6,fp' in Thumb mode /tmp/ccfQgnEB.s:419: Error: selected processor does not support `smull fp,r10,r2,r7' in Thumb mode /tmp/ccfQgnEB.s:436: Error: selected processor does not support `smull fp,r10,r2,r7' in Thumb mode /tmp/ccfQgnEB.s:455: Error: selected processor does not support `smull r8,r2,r5,r7' in Thumb mode /tmp/ccfQgnEB.s:471: Error: selected processor does not support `smull r5,r2,r4,r8' in Thumb mode /tmp/ccfQgnEB.s:491: Error: selected processor does not support `smull r5,r4,r2,r9' in Thumb mode /tmp/ccfQgnEB.s:503: Error: selected processor does not support `smull r5,r4,r2,ip' in Thumb mode /tmp/ccfQgnEB.s:518: Error: selected processor does not support `smull r5,r4,r2,r10' in Thumb mode /tmp/ccfQgnEB.s:531: Error: selected processor does not support `smull r4,r2,r1,r8' in Thumb mode /tmp/ccfQgnEB.s:542: Error: selected processor does not support `smull r4,r1,r2,r9' in Thumb mode /tmp/ccfQgnEB.s:559: Error: selected processor does not support `smull r4,r1,r2,ip' in Thumb mode /tmp/ccfQgnEB.s:574: Error: selected processor does not support `smull r4,r1,r2,r10' in Thumb mode /tmp/ccfQgnEB.s:585: Error: selected processor does not support `smull r1,r2,r3,r8' in Thumb mode /tmp/ccfQgnEB.s:599: Error: selected processor does not support `smull r1,r2,r3,r9' in Thumb mode /tmp/ccfQgnEB.s:615: Error: selected processor does not support `smull r1,r2,r3,ip' in Thumb mode /tmp/ccfQgnEB.s:629: Error: selected processor does not support `smull r1,r2,r3,r10' in Thumb mode /tmp/ccfQgnEB.s:643: Error: selected processor does not support `smull r1,r2,r0,r8' in Thumb mode /tmp/ccfQgnEB.s:678: Error: selected processor does not support `smull r4,r1,r0,fp' in Thumb mode /tmp/ccfQgnEB.s:890: Error: selected processor does not support `smull r8,r0,r1,r9' in Thumb mode /tmp/ccfQgnEB.s:900: Error: selected processor does not support `smull ip,r8,r1,r3' in Thumb mode /tmp/ccfQgnEB.s:921: Error: selected processor does not support `smull ip,r1,r0,fp' in Thumb mode /tmp/ccfQgnEB.s:940: Error: selected processor does not support `smull ip,r0,r1,r9' in Thumb mode /tmp/ccfQgnEB.s:952: Error: selected processor does not support `smull ip,r0,r1,r10' in Thumb mode /tmp/ccfQgnEB.s:977: Error: selected processor does not support `smull ip,r5,r1,r9' in Thumb mode /tmp/ccfQgnEB.s:987: Error: selected processor does not support `smull ip,r5,r1,r10' in Thumb mode /tmp/ccfQgnEB.s:1013: Error: selected processor does not support `smull r8,ip,r1,r9' in Thumb mode /tmp/ccfQgnEB.s:1025: Error: selected processor does not support `smull r8,ip,r1,r10' in Thumb mode /tmp/ccfQgnEB.s:1053: Error: selected processor does not support `smull ip,r1,r0,r9' in Thumb mode /tmp/ccfQgnEB.s:1062: Error: selected processor does not support `smull r8,ip,r0,r10' in Thumb mode /tmp/ccfQgnEB.s:1086: Error: selected processor does not support `smull r8,r0,r4,fp' in Thumb mode /tmp/ccfQgnEB.s:1103: Error: selected processor does not support `smull ip,r4,r1,fp' in Thumb mode /tmp/ccfQgnEB.s:1127: Error: selected processor does not support `smull r4,r0,r1,r9' in Thumb mode /tmp/ccfQgnEB.s:1136: Error: selected processor does not support `smull r4,r0,r1,r10' in Thumb mode /tmp/ccfQgnEB.s:1163: Error: selected processor does not support `smull ip,r4,r1,fp' in Thumb mode /tmp/ccfQgnEB.s:1176: Error: selected processor does not support `smull r4,r1,r0,r9' in Thumb mode /tmp/ccfQgnEB.s:1184: Error: selected processor does not support `smull ip,r4,r0,r10' in Thumb mode /tmp/ccfQgnEB.s:1213: Error: selected processor does not support `smull ip,r4,r0,fp' in Thumb mode /tmp/ccfQgnEB.s:1227: Error: selected processor does not support `smull ip,r0,r6,fp' in Thumb mode /tmp/ccfQgnEB.s:1247: Error: selected processor does not support `smull r8,r5,r6,fp' in Thumb mode /tmp/ccfQgnEB.s:1266: Error: selected processor does not support `smull r6,r4,r1,fp' in Thumb mode /tmp/ccfQgnEB.s:1290: Error: selected processor does not support `smull r4,r0,r1,r9' in Thumb mode /tmp/ccfQgnEB.s:1299: Error: selected processor does not support `smull r4,r6,r1,r10' in Thumb mode /tmp/ccfQgnEB.s:1318: Error: selected processor does not support `smull r9,r4,r5,fp' in Thumb mode /tmp/ccfQgnEB.s:1339: Error: selected processor does not support `smull r7,r2,r5,fp' in Thumb mode /tmp/ccfQgnEB.s:1367: Error: selected processor does not support `smull r7,r5,r2,fp' in Thumb mode /tmp/ccfQgnEB.s:1391: Error: selected processor does not support `smull ip,r1,r2,fp' in Thumb mode /tmp/ccfQgnEB.s:1413: Error: selected processor does not support `smull ip,r2,r4,fp' in Thumb mode /tmp/ccfQgnEB.s:1437: Error: selected processor does not support `smull ip,r4,r7,fp' in Thumb mode /tmp/ccfQgnEB.s:1459: Error: selected processor does not support `smull r6,r1,r0,fp' in Thumb mode Makefile:617: recipe for target 'synth.lo' failed make[3]: *** [synth.lo] Error 1 In function 'sdctII', inlined from 'dctIV' at layer3.c:1781:3, inlined from 'imdct36' at layer3.c:1807:3, inlined from 'III_imdct_l' at layer3.c:2132:3: layer3.c:1743:3: warning: 'fastsdct' accessing 72 bytes in a region of size 68 [-Wstringop-overflow=] 1743 | fastsdct(tmp, &X[1]); | ^~~~~~~~~~~~~~~~~~~~ layer3.c: In function 'III_imdct_l': layer3.c:1743:3: note: referencing argument 2 of type 'mad_fixed_t *' {aka 'int *'} layer3.c:1643:6: note: in a call to function 'fastsdct' 1643 | void fastsdct(mad_fixed_t const x[9], mad_fixed_t y[18]) | ^~~~~~~~ /tmp/ccXlcge9.s: Assembler messages: /tmp/ccXlcge9.s:62: Error: selected processor does not support `smull r2,r1,r0,r3' in Thumb mode /tmp/ccXlcge9.s:63: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28' /tmp/ccXlcge9.s:64: Error: unshifted register required -- `adc r0,r2,r1,lsl#4' /tmp/ccXlcge9.s:154: Error: selected processor does not support `smull r3,r2,r6,ip' in Thumb mode /tmp/ccXlcge9.s:157: Error: selected processor does not support `smlal r3,r2,r4,r5' in Thumb mode /tmp/ccXlcge9.s:160: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r9,r3,lsr#28' /tmp/ccXlcge9.s:161: Error: unshifted register required -- `adc r9,r9,r2,lsl#4' /tmp/ccXlcge9.s:169: Error: selected processor does not support `smull r3,r2,r8,ip' in Thumb mode /tmp/ccXlcge9.s:172: Error: selected processor does not support `smlal r3,r2,r6,r5' in Thumb mode /tmp/ccXlcge9.s:175: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r5,r3,lsr#28' /tmp/ccXlcge9.s:176: Error: unshifted register required -- `adc r5,r5,r2,lsl#4' /tmp/ccXlcge9.s:253: Error: selected processor does not support `smull r9,r10,r5,r2' in Thumb mode /tmp/ccXlcge9.s:254: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r9,r9,lsr#28' /tmp/ccXlcge9.s:255: Error: unshifted register required -- `adc r5,r9,r10,lsl#4' /tmp/ccXlcge9.s:265: Error: selected processor does not support `smull r9,r10,r5,r2' in Thumb mode /tmp/ccXlcge9.s:266: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r9,r9,lsr#28' /tmp/ccXlcge9.s:267: Error: unshifted register required -- `adc r8,r9,r10,lsl#4' /tmp/ccXlcge9.s:276: Error: selected processor does not support `smull r9,r10,r5,r2' in Thumb mode /tmp/ccXlcge9.s:277: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r9,r9,lsr#28' /tmp/ccXlcge9.s:278: Error: unshifted register required -- `adc r5,r9,r10,lsl#4' /tmp/ccXlcge9.s:285: Error: selected processor does not support `smull r7,r9,r3,r4' in Thumb mode /tmp/ccXlcge9.s:286: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r7,r7,lsr#28' /tmp/ccXlcge9.s:287: Error: unshifted register required -- `adc r3,r7,r9,lsl#4' /tmp/ccXlcge9.s:298: Error: selected processor does not support `smull r7,ip,r6,r4' in Thumb mode /tmp/ccXlcge9.s:299: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r7,r7,lsr#28' /tmp/ccXlcge9.s:300: Error: unshifted register required -- `adc r4,r7,ip,lsl#4' /tmp/ccXlcge9.s:311: Error: selected processor does not support `smull r4,ip,r7,r9' in Thumb mode /tmp/ccXlcge9.s:312: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r4,r4,lsr#28' /tmp/ccXlcge9.s:313: Error: unshifted register required -- `adc r7,r4,ip,lsl#4' /tmp/ccXlcge9.s:321: Error: selected processor does not support `smull ip,r9,r4,r2' in Thumb mode /tmp/ccXlcge9.s:322: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28' /tmp/ccXlcge9.s:323: Error: unshifted register required -- `adc r4,ip,r9,lsl#4' /tmp/ccXlcge9.s:334: Error: selected processor does not support `smull r10,fp,ip,r2' in Thumb mode /tmp/ccXlcge9.s:335: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r10,r10,lsr#28' /tmp/ccXlcge9.s:336: Error: unshifted register required -- `adc ip,r10,fp,lsl#4' /tmp/ccXlcge9.s:466: Error: selected processor does not support `smull r9,r10,r3,r1' in Thumb mode /tmp/ccXlcge9.s:467: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r9,r9,lsr#28' /tmp/ccXlcge9.s:468: Error: unshifted register required -- `adc r3,r9,r10,lsl#4' /tmp/ccXlcge9.s:476: Error: selected processor does not support `smull r1,r9,r3,r8' in Thumb mode /tmp/ccXlcge9.s:477: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r1,r1,lsr#28' /tmp/ccXlcge9.s:478: Error: unshifted register required -- `adc r3,r1,r9,lsl#4' /tmp/ccXlcge9.s:486: Error: selected processor does not support `smull r1,r8,r3,ip' in Thumb mode /tmp/ccXlcge9.s:487: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r1,r1,lsr#28' /tmp/ccXlcge9.s:488: Error: unshifted register required -- `adc r3,r1,r8,lsl#4' /tmp/ccXlcge9.s:559: Error: selected processor does not support `smull r9,r10,r3,fp' in Thumb mode /tmp/ccXlcge9.s:560: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r9,r9,lsr#28' /tmp/ccXlcge9.s:561: Error: unshifted register required -- `adc r3,r9,r10,lsl#4' /tmp/ccXlcge9.s:572: Error: selected processor does not support `smull r9,r10,r3,r8' in Thumb mode /tmp/ccXlcge9.s:573: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r9,r9,lsr#28' /tmp/ccXlcge9.s:574: Error: unshifted register required -- `adc r3,r9,r10,lsl#4' /tmp/ccXlcge9.s:584: Error: selected processor does not support `smull r8,r9,r3,ip' in Thumb mode /tmp/ccXlcge9.s:585: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r8,r8,lsr#28' /tmp/ccXlcge9.s:586: Error: unshifted register required -- `adc r3,r8,r9,lsl#4' /tmp/ccXlcge9.s:801: Error: selected processor does not support `smull r8,r9,r3,r2' in Thumb mode /tmp/ccXlcge9.s:802: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r8,r8,lsr#28' /tmp/ccXlcge9.s:803: Error: unshifted register required -- `adc r3,r8,r9,lsl#4' /tmp/ccXlcge9.s:811: Error: selected processor does not support `smull r2,r8,r3,r1' in Thumb mode /tmp/ccXlcge9.s:812: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28' /tmp/ccXlcge9.s:813: Error: unshifted register required -- `adc r3,r2,r8,lsl#4' /tmp/ccXlcge9.s:821: Error: selected processor does not support `smull r2,r1,r3,ip' in Thumb mode /tmp/ccXlcge9.s:822: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28' /tmp/ccXlcge9.s:823: Error: unshifted register required -- `adc r3,r2,r1,lsl#4' /tmp/ccXlcge9.s:844: Error: selected processor does not support `smull r5,r6,r3,r2' in Thumb mode /tmp/ccXlcge9.s:845: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r5,r5,lsr#28' /tmp/ccXlcge9.s:846: Error: unshifted register required -- `adc r3,r5,r6,lsl#4' /tmp/ccXlcge9.s:879: Error: selected processor does not support `smull ip,r8,r3,r2' in Thumb mode /tmp/ccXlcge9.s:880: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs ip,ip,lsr#28' /tmp/ccXlcge9.s:881: Error: unshifted register required -- `adc r3,ip,r8,lsl#4' /tmp/ccXlcge9.s:889: Error: selected processor does not support `smull r2,ip,r3,r0' in Thumb mode /tmp/ccXlcge9.s:890: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28' /tmp/ccXlcge9.s:891: Error: unshifted register required -- `adc r3,r2,ip,lsl#4' /tmp/ccXlcge9.s:899: Error: selected processor does not support `smull r2,r0,r3,r1' in Thumb mode /tmp/ccXlcge9.s:900: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28' /tmp/ccXlcge9.s:901: Error: unshifted register required -- `adc r3,r2,r0,lsl#4' /tmp/ccXlcge9.s:909: Error: selected processor does not support `smull r2,r1,r3,r7' in Thumb mode /tmp/ccXlcge9.s:910: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28' /tmp/ccXlcge9.s:911: Error: unshifted register required -- `adc r3,r2,r1,lsl#4' /tmp/ccXlcge9.s:963: Error: selected processor does not support `smull r6,r7,r3,r2' in Thumb mode /tmp/ccXlcge9.s:964: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r6,r6,lsr#28' /tmp/ccXlcge9.s:965: Error: unshifted register required -- `adc r3,r6,r7,lsl#4' /tmp/ccXlcge9.s:992: Error: selected processor does not support `smull r7,ip,r3,r2' in Thumb mode /tmp/ccXlcge9.s:993: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r7,r7,lsr#28' /tmp/ccXlcge9.s:994: Error: unshifted register required -- `adc r3,r7,ip,lsl#4' /tmp/ccXlcge9.s:1002: Error: selected processor does not support `smull r2,r7,r3,r1' in Thumb mode /tmp/ccXlcge9.s:1003: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28' /tmp/ccXlcge9.s:1004: Error: unshifted register required -- `adc r3,r2,r7,lsl#4' /tmp/ccXlcge9.s:1012: Error: selected processor does not support `smull r2,r1,r3,r0' in Thumb mode /tmp/ccXlcge9.s:1013: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r2,r2,lsr#28' /tmp/ccXlcge9.s:1014: Error: unshifted register required -- `adc r3,r2,r1,lsl#4' /tmp/ccXlcge9.s:1121: Error: selected processor does not support `smull r3,r2,ip,r7' in Thumb mode /tmp/ccXlcge9.s:1128: Error: selected processor does not support `smlal r3,r2,r8,r7' in Thumb mode /tmp/ccXlcge9.s:1131: Error: selected processor does not support `smlal r3,r2,r9,r5' in Thumb mode /tmp/ccXlcge9.s:1138: Error: selected processor does not support `smlal r3,r2,fp,r5' in Thumb mode /tmp/ccXlcge9.s:1145: Error: selected processor does not support `smlal r3,r2,r6,r5' in Thumb mode /tmp/ccXlcge9.s:1152: Error: selected processor does not support `smlal r3,r2,r10,r5' in Thumb mode /tmp/ccXlcge9.s:1155: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r5,r3,lsr#28' /tmp/ccXlcge9.s:1156: Error: unshifted register required -- `adc r5,r5,r2,lsl#4' /tmp/ccXlcge9.s:1166: Error: selected processor does not support `smull r3,r2,ip,r5' in Thumb mode /tmp/ccXlcge9.s:1173: Error: selected processor does not support `smlal r3,r2,r8,r5' in Thumb mode /tmp/ccXlcge9.s:1180: Error: selected processor does not support `smlal r3,r2,r9,r5' in Thumb mode /tmp/ccXlcge9.s:1187: Error: selected processor does not support `smlal r3,r2,fp,r5' in Thumb mode /tmp/ccXlcge9.s:1194: Error: selected processor does not support `smlal r3,r2,r6,r5' in Thumb mode /tmp/ccXlcge9.s:1201: Error: selected processor does not support `smlal r3,r2,r10,r5' in Thumb mode /tmp/ccXlcge9.s:1204: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r5,r3,lsr#28' /tmp/ccXlcge9.s:1205: Error: unshifted register required -- `adc r5,r5,r2,lsl#4' /tmp/ccXlcge9.s:1271: Error: selected processor does not support `smull r6,r7,r0,r4' in Thumb mode /tmp/ccXlcge9.s:1272: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r6,r6,lsr#28' /tmp/ccXlcge9.s:1273: Error: unshifted register required -- `adc r0,r6,r7,lsl#4' /tmp/ccXlcge9.s:1283: Error: selected processor does not support `smull r0,r4,r6,r7' in Thumb mode /tmp/ccXlcge9.s:1291: Error: selected processor does not support `smlal r0,r4,r6,r7' in Thumb mode /tmp/ccXlcge9.s:1294: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r6,r0,lsr#28' /tmp/ccXlcge9.s:1295: Error: unshifted register required -- `adc r6,r6,r4,lsl#4' /tmp/ccXlcge9.s:1304: Error: selected processor does not support `smull r0,r4,r6,r7' in Thumb mode /tmp/ccXlcge9.s:1312: Error: selected processor does not support `smlal r0,r4,r6,r7' in Thumb mode /tmp/ccXlcge9.s:1315: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r6,r0,lsr#28' /tmp/ccXlcge9.s:1316: Error: unshifted register required -- `adc r6,r6,r4,lsl#4' /tmp/ccXlcge9.s:1325: Error: selected processor does not support `smull r6,r7,r0,r4' in Thumb mode /tmp/ccXlcge9.s:1326: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r6,r6,lsr#28' /tmp/ccXlcge9.s:1327: Error: unshifted register required -- `adc r0,r6,r7,lsl#4' /tmp/ccXlcge9.s:4144: Error: selected processor does not support `smull r9,fp,r1,r2' in Thumb mode /tmp/ccXlcge9.s:4145: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r9,r9,lsr#28' /tmp/ccXlcge9.s:4146: Error: unshifted register required -- `adc r2,r9,fp,lsl#4' /tmp/ccXlcge9.s:4501: Error: selected processor does not support `smull r8,r10,r1,r9' in Thumb mode /tmp/ccXlcge9.s:4502: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r8,r8,lsr#28' /tmp/ccXlcge9.s:4503: Error: unshifted register required -- `adc r1,r8,r10,lsl#4' /tmp/ccXlcge9.s:4510: Error: selected processor does not support `smull r1,r0,r2,r9' in Thumb mode /tmp/ccXlcge9.s:4511: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r1,r1,lsr#28' /tmp/ccXlcge9.s:4512: Error: unshifted register required -- `adc r2,r1,r0,lsl#4' /tmp/ccXlcge9.s:4593: Error: selected processor does not support `smull r8,r2,r3,ip' in Thumb mode /tmp/ccXlcge9.s:4594: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r8,r8,lsr#28' /tmp/ccXlcge9.s:4595: Error: unshifted register required -- `adc r3,r8,r2,lsl#4' /tmp/ccXlcge9.s:4603: Error: selected processor does not support `smull r3,r8,r9,fp' in Thumb mode /tmp/ccXlcge9.s:4604: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `movs r3,r3,lsr#28' /tmp/ccXlcge9.s:4605: Error: unshifted register required -- `adc r9,r3,r8,lsl#4' Makefile:617: recipe for target 'layer3.lo' failed make[3]: *** [layer3.lo] Error 1 make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b' Makefile:656: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b' Makefile:454: recipe for target 'all' failed make[1]: *** [all] Error 2 make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b' package/pkg-generic.mk:290: recipe for target '/home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b/.stamp_built' failed make: *** [/home/buildroot/autobuild/instance-1/output-1/build/libmad-0.15.1b/.stamp_built] Error 2 make: Leaving directory '/home/buildroot/autobuild/instance-1/buildroot'