{"diffoscope-json-version": 1, "source1": "/home/autobuild/autobuild/instance-18/output-1/images/rootfs.tar", "source2": "/home/autobuild/autobuild/instance-18/output-2/images/rootfs.tar", "unified_diff": null, "details": [{"source1": "./include/execline/config.h", "source2": "./include/execline/config.h", "unified_diff": "@@ -1,10 +1,10 @@\n /* ISC license. */\n \n-/* Generated by: ./configure CFLAGS='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1 -D_GNU_SOURCE' --prefix=/ --with-sysdeps=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs/sysdeps --with-include=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/include --with-dynlib=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib --with-lib=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs --disable-allstatic --disable-static --enable-shared */\n+/* Generated by: ./configure CFLAGS='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1 -D_GNU_SOURCE' --prefix=/ --with-sysdeps=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs/sysdeps --with-include=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/include --with-dynlib=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib --with-lib=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs --disable-allstatic --disable-static --enable-shared */\n \n #ifndef EXECLINE_CONFIG_H\n #define EXECLINE_CONFIG_H\n \n #define EXECLINE_VERSION \"2.9.6.0\"\n #define EXECLINE_BINPREFIX \"\"\n #define EXECLINE_EXTBINPREFIX \"\"\n"}, {"source1": "./include/mdevd/config.h", "source2": "./include/mdevd/config.h", "unified_diff": "@@ -1,10 +1,10 @@\n /* ISC license. */\n \n-/* Generated by: ./configure --prefix=/ --with-sysdeps=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs/sysdeps --with-include=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/include --with-dynlib=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib --with-lib=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs --disable-allstatic --disable-static --enable-shared */\n+/* Generated by: ./configure --prefix=/ --with-sysdeps=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs/sysdeps --with-include=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/include --with-dynlib=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib --with-lib=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs --disable-allstatic --disable-static --enable-shared */\n \n #ifndef MDEVD_CONFIG_H\n #define MDEVD_CONFIG_H\n \n #define MDEVD_VERSION \"0.1.6.4\"\n #define MDEVD_BINPREFIX \"\"\n #define MDEVD_EXTBINPREFIX \"\"\n"}, {"source1": "./include/s6-linux-utils/config.h", "source2": "./include/s6-linux-utils/config.h", "unified_diff": "@@ -1,10 +1,10 @@\n /* ISC license. */\n \n-/* Generated by: ./configure --prefix=/ --with-sysdeps=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs/sysdeps --with-include=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/include --with-dynlib=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib --with-lib=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs --disable-allstatic --disable-static --enable-shared */\n+/* Generated by: ./configure --prefix=/ --with-sysdeps=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs/sysdeps --with-include=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/include --with-dynlib=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib --with-lib=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs --disable-allstatic --disable-static --enable-shared */\n \n #ifndef S6_LINUX_UTILS_CONFIG_H\n #define S6_LINUX_UTILS_CONFIG_H\n \n #define S6_LINUX_UTILS_VERSION \"2.6.2.0\"\n #define S6_LINUX_UTILS_BINPREFIX \"\"\n #define S6_LINUX_UTILS_EXTBINPREFIX \"\"\n"}, {"source1": "./include/s6-portable-utils/config.h", "source2": "./include/s6-portable-utils/config.h", "unified_diff": "@@ -1,10 +1,10 @@\n /* ISC license. */\n \n-/* Generated by: ./configure --prefix=/ --with-sysdeps=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs/sysdeps --with-include=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/include --with-dynlib=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib --with-lib=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs --disable-allstatic --disable-static --enable-shared */\n+/* Generated by: ./configure --prefix=/ --with-sysdeps=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs/sysdeps --with-include=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/include --with-dynlib=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib --with-lib=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs --disable-allstatic --disable-static --enable-shared */\n \n #ifndef S6_PORTABLE_UTILS_CONFIG_H\n #define S6_PORTABLE_UTILS_CONFIG_H\n \n #define S6_PORTABLE_UTILS_VERSION \"2.3.0.3\"\n #define S6_PORTABLE_UTILS_BINPREFIX \"\"\n #define S6_PORTABLE_UTILS_EXTBINPREFIX \"\"\n"}, {"source1": "./include/s6-rc/config.h", "source2": "./include/s6-rc/config.h", "unified_diff": "@@ -1,10 +1,10 @@\n /* ISC license. */\n \n-/* Generated by: ./configure --prefix=/ --with-sysdeps=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs/sysdeps --with-include=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/include --with-dynlib=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib --with-lib=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/execline --with-lib=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/s6 --with-lib=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs --disable-allstatic --disable-static --enable-shared */\n+/* Generated by: ./configure --prefix=/ --with-sysdeps=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs/sysdeps --with-include=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/include --with-dynlib=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib --with-lib=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/execline --with-lib=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/s6 --with-lib=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs --disable-allstatic --disable-static --enable-shared */\n \n #ifndef S6RC_CONFIG_H\n #define S6RC_CONFIG_H\n \n #define S6RC_VERSION \"0.5.4.3\"\n #define S6RC_LIVE_BASE \"/run/s6-rc\"\n #define S6RC_BINPREFIX \"\"\n"}, {"source1": "./include/s6/config.h", "source2": "./include/s6/config.h", "unified_diff": "@@ -1,10 +1,10 @@\n /* ISC license. */\n \n-/* Generated by: ./configure --prefix=/ --with-sysdeps=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs/sysdeps --with-include=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/include --with-dynlib=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib --with-lib=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/execline --with-lib=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs --disable-allstatic --disable-static --enable-shared */\n+/* Generated by: ./configure --prefix=/ --with-sysdeps=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs/sysdeps --with-include=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/include --with-dynlib=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib --with-lib=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/execline --with-lib=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/lib/skalibs --disable-allstatic --disable-static --enable-shared */\n \n #ifndef S6_CONFIG_H\n #define S6_CONFIG_H\n \n #define S6_VERSION \"2.13.0.0\"\n #define S6_BINPREFIX \"\"\n #define S6_EXTBINPREFIX \"\"\n"}, {"source1": "./usr/bin/jq", "source2": "./usr/bin/jq", "unified_diff": null, "details": [{"source1": "strings --all --bytes=8 {}", "source2": "strings --all --bytes=8 {}", "unified_diff": "@@ -144,15 +144,15 @@\n %s: invalid JSON text passed to --argjson\n %s: --%s takes two parameters (e.g. --%s varname filename)\n %s: Bad JSON in --%s %s %s: %s\n debug-dump-disasm\n debug-trace=all\n debug-trace\n build-configuration\n---target=armeb-buildroot-linux-gnueabihf --host=armeb-buildroot-linux-gnueabihf --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix= --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared --with-oniguruma build_alias=x86_64-pc-linux-gnu host_alias=armeb-buildroot-linux-gnueabihf target_alias=armeb-buildroot-linux-gnueabihf CC=/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-gcc 'CFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1 -std=c99' LDFLAGS= 'CPPFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' CPP=/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-cpp\n+--target=armeb-buildroot-linux-gnueabihf --host=armeb-buildroot-linux-gnueabihf --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix= --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared --with-oniguruma build_alias=x86_64-pc-linux-gnu host_alias=armeb-buildroot-linux-gnueabihf target_alias=armeb-buildroot-linux-gnueabihf CC=/home/autobuild/autobuild/instance-18/output-2/host/bin/armeb-buildroot-linux-gnueabihf-gcc 'CFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1 -std=c99' LDFLAGS= 'CPPFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' CPP=/home/autobuild/autobuild/instance-18/output-2/host/bin/armeb-buildroot-linux-gnueabihf-cpp\n run-tests\n %s: Unknown option %s\n NO_COLOR\n JQ_COLORS\n Failed to set $JQ_COLORS\n $ORIGIN/../lib/jq\n $ORIGIN/../lib\n"}, {"source1": "/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-readelf --wide --decompress --hex-du [\u2026]", "source2": "/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-readelf --wide --decompress --hex-du [\u2026]", "unified_diff": "@@ -300,15 +300,15 @@\n 0x0000552c 65622d62 75696c64 726f6f74 2d6c696e eb-buildroot-lin\n 0x0000553c 75782d67 6e756561 62696866 20746172 ux-gnueabihf tar\n 0x0000554c 6765745f 616c6961 733d6172 6d65622d get_alias=armeb-\n 0x0000555c 6275696c 64726f6f 742d6c69 6e75782d buildroot-linux-\n 0x0000556c 676e7565 61626968 66204343 3d2f686f gnueabihf CC=/ho\n 0x0000557c 6d652f61 75746f62 75696c64 2f617574 me/autobuild/aut\n 0x0000558c 6f627569 6c642f69 6e737461 6e63652d obuild/instance-\n- 0x0000559c 31382f6f 75747075 742d312f 686f7374 18/output-1/host\n+ 0x0000559c 31382f6f 75747075 742d322f 686f7374 18/output-2/host\n 0x000055ac 2f62696e 2f61726d 65622d62 75696c64 /bin/armeb-build\n 0x000055bc 726f6f74 2d6c696e 75782d67 6e756561 root-linux-gnuea\n 0x000055cc 62696866 2d676363 20274346 4c414753 bihf-gcc 'CFLAGS\n 0x000055dc 3d2d445f 4c415247 4546494c 455f534f =-D_LARGEFILE_SO\n 0x000055ec 55524345 202d445f 4c415247 4546494c URCE -D_LARGEFIL\n 0x000055fc 4536345f 534f5552 4345202d 445f4649 E64_SOURCE -D_FI\n 0x0000560c 4c455f4f 46465345 545f4249 54533d36 LE_OFFSET_BITS=6\n@@ -318,15 +318,15 @@\n 0x0000564c 3d202743 5050464c 4147533d 2d445f4c = 'CPPFLAGS=-D_L\n 0x0000565c 41524745 46494c45 5f534f55 52434520 ARGEFILE_SOURCE \n 0x0000566c 2d445f4c 41524745 46494c45 36345f53 -D_LARGEFILE64_S\n 0x0000567c 4f555243 45202d44 5f46494c 455f4f46 OURCE -D_FILE_OF\n 0x0000568c 46534554 5f424954 533d3634 27204350 FSET_BITS=64' CP\n 0x0000569c 503d2f68 6f6d652f 6175746f 6275696c P=/home/autobuil\n 0x000056ac 642f6175 746f6275 696c642f 696e7374 d/autobuild/inst\n- 0x000056bc 616e6365 2d31382f 6f757470 75742d31 ance-18/output-1\n+ 0x000056bc 616e6365 2d31382f 6f757470 75742d32 ance-18/output-2\n 0x000056cc 2f686f73 742f6269 6e2f6172 6d65622d /host/bin/armeb-\n 0x000056dc 6275696c 64726f6f 742d6c69 6e75782d buildroot-linux-\n 0x000056ec 676e7565 61626968 662d6370 70000000 gnueabihf-cpp...\n 0x000056fc 72756e2d 74657374 73000000 25733a20 run-tests...%s: \n 0x0000570c 556e6b6e 6f776e20 6f707469 6f6e2025 Unknown option %\n 0x0000571c 730a0000 4e4f5f43 4f4c4f52 00000000 s...NO_COLOR....\n 0x0000572c 4a515f43 4f4c4f52 53000000 4661696c JQ_COLORS...Fail\n"}]}, {"source1": "./usr/bin/ldns-config", "source2": "./usr/bin/ldns-config", "unified_diff": "@@ -1,15 +1,15 @@\n #!/bin/sh\n \n prefix=\"/usr\"\n exec_prefix=\"/usr\"\n VERSION=\"1.8.3\"\n CFLAGS=\"-DOPENSSL_API_COMPAT=10100 -fno-strict-aliasing -Wunused-function -Wstrict-prototypes -Wwrite-strings -W -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1\"\n-CPPFLAGS=\"-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/usr/include\"\n-LDFLAGS=\" -L/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/usr/lib\"\n+CPPFLAGS=\"-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/usr/include\"\n+LDFLAGS=\" -L/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/usr/lib\"\n PYTHON_CPPFLAGS=\"\"\n PYTHON_LDFLAGS=\"@PYTHON_LDFLAGS@\"\n LIBS=\" -lssl -lcrypto\"\n LIBDIR=\"${exec_prefix}/lib\"\n INCLUDEDIR=\"${prefix}/include\"\n LIBVERSION=\"8:0:5\"\n \n"}, {"source1": "./usr/bin/mc", "source2": "./usr/bin/mc", "unified_diff": null, "details": [{"source1": "strings --all --bytes=8 {}", "source2": "strings --all --bytes=8 {}", "unified_diff": "@@ -981,15 +981,15 @@\n %-17s %s/\n \t%-15s %s/%s\n mc.macros\n mcedit macros:\n mcedit/macros.d/macro.*\n mcedit external macros:\n Cache directory:\n- '--target=armeb-buildroot-linux-gnueabihf' '--host=armeb-buildroot-linux-gnueabihf' '--build=x86_64-pc-linux-gnu' '--prefix=/usr' '--exec-prefix=/usr' '--sysconfdir=/etc' '--localstatedir=/var' '--program-prefix=' '--disable-gtk-doc' '--disable-gtk-doc-html' '--disable-doc' '--disable-docs' '--disable-documentation' '--with-xmlto=no' '--with-fop=no' '--disable-dependency-tracking' '--enable-ipv6' '--disable-nls' '--disable-static' '--enable-shared' '--without-gpm-mouse' '--enable-vfs-sftp' '--with-screen=slang' '--without-x' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=armeb-buildroot-linux-gnueabihf' 'target_alias=armeb-buildroot-linux-gnueabihf' 'CC=/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-gcc' 'CFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1 -std=c99' 'LDFLAGS=' 'LIBS=' 'CPPFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' 'PKG_CONFIG=/home/autobuild/autobuild/instance-18/output-1/host/bin/pkg-config' 'CPP=/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-cpp'\n+ '--target=armeb-buildroot-linux-gnueabihf' '--host=armeb-buildroot-linux-gnueabihf' '--build=x86_64-pc-linux-gnu' '--prefix=/usr' '--exec-prefix=/usr' '--sysconfdir=/etc' '--localstatedir=/var' '--program-prefix=' '--disable-gtk-doc' '--disable-gtk-doc-html' '--disable-doc' '--disable-docs' '--disable-documentation' '--with-xmlto=no' '--with-fop=no' '--disable-dependency-tracking' '--enable-ipv6' '--disable-nls' '--disable-static' '--enable-shared' '--without-gpm-mouse' '--enable-vfs-sftp' '--with-screen=slang' '--without-x' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=armeb-buildroot-linux-gnueabihf' 'target_alias=armeb-buildroot-linux-gnueabihf' 'CC=/home/autobuild/autobuild/instance-18/output-2/host/bin/armeb-buildroot-linux-gnueabihf-gcc' 'CFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1 -std=c99' 'LDFLAGS=' 'LIBS=' 'CPPFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' 'PKG_CONFIG=/home/autobuild/autobuild/instance-18/output-2/host/bin/pkg-config' 'CPP=/home/autobuild/autobuild/instance-18/output-2/host/bin/armeb-buildroot-linux-gnueabihf-cpp'\n With subshell support as default\n With support for background operations\n With mouse support on xterm\n With multiple codepages support\n Unknown error in child\n Background process error\n Child died unexpectedly\n"}, {"source1": "/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-readelf --wide --decompress --hex-du [\u2026]", "source2": "/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-readelf --wide --decompress --hex-du [\u2026]", "unified_diff": "@@ -851,15 +851,15 @@\n 0x000dbeb0 64726f6f 742d6c69 6e75782d 676e7565 droot-linux-gnue\n 0x000dbec0 61626968 66272027 74617267 65745f61 abihf' 'target_a\n 0x000dbed0 6c696173 3d61726d 65622d62 75696c64 lias=armeb-build\n 0x000dbee0 726f6f74 2d6c696e 75782d67 6e756561 root-linux-gnuea\n 0x000dbef0 62696866 27202743 433d2f68 6f6d652f bihf' 'CC=/home/\n 0x000dbf00 6175746f 6275696c 642f6175 746f6275 autobuild/autobu\n 0x000dbf10 696c642f 696e7374 616e6365 2d31382f ild/instance-18/\n- 0x000dbf20 6f757470 75742d31 2f686f73 742f6269 output-1/host/bi\n+ 0x000dbf20 6f757470 75742d32 2f686f73 742f6269 output-2/host/bi\n 0x000dbf30 6e2f6172 6d65622d 6275696c 64726f6f n/armeb-buildroo\n 0x000dbf40 742d6c69 6e75782d 676e7565 61626968 t-linux-gnueabih\n 0x000dbf50 662d6763 63272027 43464c41 47533d2d f-gcc' 'CFLAGS=-\n 0x000dbf60 445f4c41 52474546 494c455f 534f5552 D_LARGEFILE_SOUR\n 0x000dbf70 4345202d 445f4c41 52474546 494c4536 CE -D_LARGEFILE6\n 0x000dbf80 345f534f 55524345 202d445f 46494c45 4_SOURCE -D_FILE\n 0x000dbf90 5f4f4646 5345545f 42495453 3d363420 _OFFSET_BITS=64 \n@@ -870,20 +870,20 @@\n 0x000dbfe0 4147533d 2d445f4c 41524745 46494c45 AGS=-D_LARGEFILE\n 0x000dbff0 5f534f55 52434520 2d445f4c 41524745 _SOURCE -D_LARGE\n 0x000dc000 46494c45 36345f53 4f555243 45202d44 FILE64_SOURCE -D\n 0x000dc010 5f46494c 455f4f46 46534554 5f424954 _FILE_OFFSET_BIT\n 0x000dc020 533d3634 27202750 4b475f43 4f4e4649 S=64' 'PKG_CONFI\n 0x000dc030 473d2f68 6f6d652f 6175746f 6275696c G=/home/autobuil\n 0x000dc040 642f6175 746f6275 696c642f 696e7374 d/autobuild/inst\n- 0x000dc050 616e6365 2d31382f 6f757470 75742d31 ance-18/output-1\n+ 0x000dc050 616e6365 2d31382f 6f757470 75742d32 ance-18/output-2\n 0x000dc060 2f686f73 742f6269 6e2f706b 672d636f /host/bin/pkg-co\n 0x000dc070 6e666967 27202743 50503d2f 686f6d65 nfig' 'CPP=/home\n 0x000dc080 2f617574 6f627569 6c642f61 75746f62 /autobuild/autob\n 0x000dc090 75696c64 2f696e73 74616e63 652d3138 uild/instance-18\n- 0x000dc0a0 2f6f7574 7075742d 312f686f 73742f62 /output-1/host/b\n+ 0x000dc0a0 2f6f7574 7075742d 322f686f 73742f62 /output-2/host/b\n 0x000dc0b0 696e2f61 726d6562 2d627569 6c64726f in/armeb-buildro\n 0x000dc0c0 6f742d6c 696e7578 2d676e75 65616269 ot-linux-gnueabi\n 0x000dc0d0 68662d63 70702700 57697468 20737562 hf-cpp'.With sub\n 0x000dc0e0 7368656c 6c207375 70706f72 74206173 shell support as\n 0x000dc0f0 20646566 61756c74 00000000 57697468 default....With\n 0x000dc100 20737570 706f7274 20666f72 20626163 support for bac\n 0x000dc110 6b67726f 756e6420 6f706572 6174696f kground operatio\n"}]}, {"source1": "./usr/bin/php-cgi", "source2": "./usr/bin/php-cgi", "unified_diff": null, "details": [{"source1": "strings --all --bytes=8 {}", "source2": "strings --all --bytes=8 {}", "unified_diff": "@@ -8658,15 +8658,15 @@\n ![\"PHP](\"\n)
\n data:image/png;base64,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\" alt=\"PHP logo\" />\n PHP Version %s
\n Oct 6 2024 19:44:19\n Build Date\n Build System\n- './configure' '--target=armeb-buildroot-linux-gnueabihf' '--host=armeb-buildroot-linux-gnueabihf' '--build=x86_64-pc-linux-gnu' '--prefix=/usr' '--exec-prefix=/usr' '--sysconfdir=/etc' '--localstatedir=/var' '--program-prefix=' '--disable-gtk-doc' '--disable-gtk-doc-html' '--disable-doc' '--disable-docs' '--disable-documentation' '--with-xmlto=no' '--with-fop=no' '--disable-dependency-tracking' '--enable-ipv6' '--disable-nls' '--disable-static' '--enable-shared' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--with-config-file-scan-dir=/etc/php.d' '--disable-all' '--with-external-pcre' '--without-pear' '--with-config-file-path=/etc' '--disable-phpdbg' '--disable-rpath' '--disable-cli' '--enable-cgi' '--enable-fpm' '--enable-simplexml' '--enable-xmlwriter' '--enable-exif' '--enable-ftp' '--enable-filter' '--enable-mbstring' '--with-openssl=/home/autobuild/autobuild/instance-18/output-1/host/armeb-buildroot-linux-gnueabihf/sysroot/usr' '--with-libxml' '--disable-mysqlnd_compression_support' '--with-pcre-jit=no' '--with-curl' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=armeb-buildroot-linux-gnueabihf' 'target_alias=armeb-buildroot-linux-gnueabihf' 'PKG_CONFIG=/home/autobuild/autobuild/instance-18/output-1/host/bin/pkg-config' 'CFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1' 'LDFLAGS=' 'CPP=/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-cpp' 'CXXFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1'\n+ './configure' '--target=armeb-buildroot-linux-gnueabihf' '--host=armeb-buildroot-linux-gnueabihf' '--build=x86_64-pc-linux-gnu' '--prefix=/usr' '--exec-prefix=/usr' '--sysconfdir=/etc' '--localstatedir=/var' '--program-prefix=' '--disable-gtk-doc' '--disable-gtk-doc-html' '--disable-doc' '--disable-docs' '--disable-documentation' '--with-xmlto=no' '--with-fop=no' '--disable-dependency-tracking' '--enable-ipv6' '--disable-nls' '--disable-static' '--enable-shared' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--with-config-file-scan-dir=/etc/php.d' '--disable-all' '--with-external-pcre' '--without-pear' '--with-config-file-path=/etc' '--disable-phpdbg' '--disable-rpath' '--disable-cli' '--enable-cgi' '--enable-fpm' '--enable-simplexml' '--enable-xmlwriter' '--enable-exif' '--enable-ftp' '--enable-filter' '--enable-mbstring' '--with-openssl=/home/autobuild/autobuild/instance-18/output-2/host/armeb-buildroot-linux-gnueabihf/sysroot/usr' '--with-libxml' '--disable-mysqlnd_compression_support' '--with-pcre-jit=no' '--with-curl' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=armeb-buildroot-linux-gnueabihf' 'target_alias=armeb-buildroot-linux-gnueabihf' 'PKG_CONFIG=/home/autobuild/autobuild/instance-18/output-2/host/bin/pkg-config' 'CFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1' 'LDFLAGS=' 'CPP=/home/autobuild/autobuild/instance-18/output-2/host/bin/armeb-buildroot-linux-gnueabihf-cpp' 'CXXFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1'\n Configure Command\n Server API\n Virtual Directory Support\n Configuration File (php.ini) Path\n Loaded Configuration File\n Scan this dir for additional .ini files\n Additional .ini files parsed\n"}, {"source1": "/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-readelf --wide --decompress --hex-du [\u2026]", "source2": "/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-readelf --wide --decompress --hex-du [\u2026]", "unified_diff": "@@ -10383,15 +10383,15 @@\n 0x00464480 272d2d65 6e61626c 652d6674 70272027 '--enable-ftp' '\n 0x00464490 2d2d656e 61626c65 2d66696c 74657227 --enable-filter'\n 0x004644a0 20272d2d 656e6162 6c652d6d 62737472 '--enable-mbstr\n 0x004644b0 696e6727 20272d2d 77697468 2d6f7065 ing' '--with-ope\n 0x004644c0 6e73736c 3d2f686f 6d652f61 75746f62 nssl=/home/autob\n 0x004644d0 75696c64 2f617574 6f627569 6c642f69 uild/autobuild/i\n 0x004644e0 6e737461 6e63652d 31382f6f 75747075 nstance-18/outpu\n- 0x004644f0 742d312f 686f7374 2f61726d 65622d62 t-1/host/armeb-b\n+ 0x004644f0 742d322f 686f7374 2f61726d 65622d62 t-2/host/armeb-b\n 0x00464500 75696c64 726f6f74 2d6c696e 75782d67 uildroot-linux-g\n 0x00464510 6e756561 62696866 2f737973 726f6f74 nueabihf/sysroot\n 0x00464520 2f757372 2720272d 2d776974 682d6c69 /usr' '--with-li\n 0x00464530 62786d6c 2720272d 2d646973 61626c65 bxml' '--disable\n 0x00464540 2d6d7973 716c6e64 5f636f6d 70726573 -mysqlnd_compres\n 0x00464550 73696f6e 5f737570 706f7274 2720272d sion_support' '-\n 0x00464560 2d776974 682d7063 72652d6a 69743d6e -with-pcre-jit=n\n@@ -10403,27 +10403,27 @@\n 0x004645c0 696e7578 2d676e75 65616269 68662720 inux-gnueabihf' \n 0x004645d0 27746172 6765745f 616c6961 733d6172 'target_alias=ar\n 0x004645e0 6d65622d 6275696c 64726f6f 742d6c69 meb-buildroot-li\n 0x004645f0 6e75782d 676e7565 61626968 66272027 nux-gnueabihf' '\n 0x00464600 504b475f 434f4e46 49473d2f 686f6d65 PKG_CONFIG=/home\n 0x00464610 2f617574 6f627569 6c642f61 75746f62 /autobuild/autob\n 0x00464620 75696c64 2f696e73 74616e63 652d3138 uild/instance-18\n- 0x00464630 2f6f7574 7075742d 312f686f 73742f62 /output-1/host/b\n+ 0x00464630 2f6f7574 7075742d 322f686f 73742f62 /output-2/host/b\n 0x00464640 696e2f70 6b672d63 6f6e6669 67272027 in/pkg-config' '\n 0x00464650 43464c41 47533d2d 445f4c41 52474546 CFLAGS=-D_LARGEF\n 0x00464660 494c455f 534f5552 4345202d 445f4c41 ILE_SOURCE -D_LA\n 0x00464670 52474546 494c4536 345f534f 55524345 RGEFILE64_SOURCE\n 0x00464680 202d445f 46494c45 5f4f4646 5345545f -D_FILE_OFFSET_\n 0x00464690 42495453 3d363420 2d4f3320 2d673020 BITS=64 -O3 -g0 \n 0x004646a0 2d445f46 4f525449 46595f53 4f555243 -D_FORTIFY_SOURC\n 0x004646b0 453d3127 20274c44 464c4147 533d2720 E=1' 'LDFLAGS=' \n 0x004646c0 27435050 3d2f686f 6d652f61 75746f62 'CPP=/home/autob\n 0x004646d0 75696c64 2f617574 6f627569 6c642f69 uild/autobuild/i\n 0x004646e0 6e737461 6e63652d 31382f6f 75747075 nstance-18/outpu\n- 0x004646f0 742d312f 686f7374 2f62696e 2f61726d t-1/host/bin/arm\n+ 0x004646f0 742d322f 686f7374 2f62696e 2f61726d t-2/host/bin/arm\n 0x00464700 65622d62 75696c64 726f6f74 2d6c696e eb-buildroot-lin\n 0x00464710 75782d67 6e756561 62696866 2d637070 ux-gnueabihf-cpp\n 0x00464720 27202743 5858464c 4147533d 2d445f4c ' 'CXXFLAGS=-D_L\n 0x00464730 41524745 46494c45 5f534f55 52434520 ARGEFILE_SOURCE \n 0x00464740 2d445f4c 41524745 46494c45 36345f53 -D_LARGEFILE64_S\n 0x00464750 4f555243 45202d44 5f46494c 455f4f46 OURCE -D_FILE_OF\n 0x00464760 46534554 5f424954 533d3634 202d4f33 FSET_BITS=64 -O3\n"}]}, {"source1": "./usr/bin/tcpspray", "source2": "./usr/bin/tcpspray", "unified_diff": null, "details": [{"source1": "strings --all --bytes=8 {}", "source2": "strings --all --bytes=8 {}", "unified_diff": "@@ -40,15 +40,15 @@\n -n specify the number of blocks to send (default: 100)\n -V display program version and exit\n -v enable verbose output\n tcpspray6: TCP/IP bandwidth tester %s (%s)\n Brett-Arch\n Oct 6 2024\n built %s on %s\n-./configure '--target=armeb-buildroot-linux-gnueabihf' '--host=armeb-buildroot-linux-gnueabihf' '--build=x86_64-pc-linux-gnu' '--prefix=/usr' '--exec-prefix=/usr' '--sysconfdir=/etc' '--localstatedir=/var' '--program-prefix=' '--disable-gtk-doc' '--disable-gtk-doc-html' '--disable-doc' '--disable-docs' '--disable-documentation' '--with-xmlto=no' '--with-fop=no' '--disable-dependency-tracking' '--enable-ipv6' '--disable-nls' '--disable-static' '--enable-shared' '--disable-rpath' '--disable-suid-install' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=armeb-buildroot-linux-gnueabihf' 'target_alias=armeb-buildroot-linux-gnueabihf' 'CC=/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-gcc -std=c11' 'CFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1' 'LDFLAGS=' 'LIBS=' 'CPPFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' 'PERL=/usr/bin/perl' 'CPP=/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-cpp'\n+./configure '--target=armeb-buildroot-linux-gnueabihf' '--host=armeb-buildroot-linux-gnueabihf' '--build=x86_64-pc-linux-gnu' '--prefix=/usr' '--exec-prefix=/usr' '--sysconfdir=/etc' '--localstatedir=/var' '--program-prefix=' '--disable-gtk-doc' '--disable-gtk-doc-html' '--disable-doc' '--disable-docs' '--disable-documentation' '--with-xmlto=no' '--with-fop=no' '--disable-dependency-tracking' '--enable-ipv6' '--disable-nls' '--disable-static' '--enable-shared' '--disable-rpath' '--disable-suid-install' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=armeb-buildroot-linux-gnueabihf' 'target_alias=armeb-buildroot-linux-gnueabihf' 'CC=/home/autobuild/autobuild/instance-18/output-2/host/bin/armeb-buildroot-linux-gnueabihf-gcc -std=c11' 'CFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1' 'LDFLAGS=' 'LIBS=' 'CPPFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' 'PERL=/usr/bin/perl' 'CPP=/home/autobuild/autobuild/instance-18/output-2/host/bin/armeb-buildroot-linux-gnueabihf-cpp'\n Configured with: %s\n Written by Remi Denis-Courmont\n Copyright (C) %u-%u Remi Denis-Courmont\n This is free software; see the source for copying conditions.\n There is NO warranty; not even for MERCHANTABILITY or\n FITNESS FOR A PARTICULAR PURPOSE.\n Try \"%s -h\" for more information.\n"}, {"source1": "/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-readelf --wide --decompress --hex-du [\u2026]", "source2": "/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-readelf --wide --decompress --hex-du [\u2026]", "unified_diff": "@@ -104,15 +104,15 @@\n 0x000021e8 6f742d6c 696e7578 2d676e75 65616269 ot-linux-gnueabi\n 0x000021f8 68662720 27746172 6765745f 616c6961 hf' 'target_alia\n 0x00002208 733d6172 6d65622d 6275696c 64726f6f s=armeb-buildroo\n 0x00002218 742d6c69 6e75782d 676e7565 61626968 t-linux-gnueabih\n 0x00002228 66272027 43433d2f 686f6d65 2f617574 f' 'CC=/home/aut\n 0x00002238 6f627569 6c642f61 75746f62 75696c64 obuild/autobuild\n 0x00002248 2f696e73 74616e63 652d3138 2f6f7574 /instance-18/out\n- 0x00002258 7075742d 312f686f 73742f62 696e2f61 put-1/host/bin/a\n+ 0x00002258 7075742d 322f686f 73742f62 696e2f61 put-2/host/bin/a\n 0x00002268 726d6562 2d627569 6c64726f 6f742d6c rmeb-buildroot-l\n 0x00002278 696e7578 2d676e75 65616269 68662d67 inux-gnueabihf-g\n 0x00002288 6363202d 7374643d 63313127 20274346 cc -std=c11' 'CF\n 0x00002298 4c414753 3d2d445f 4c415247 4546494c LAGS=-D_LARGEFIL\n 0x000022a8 455f534f 55524345 202d445f 4c415247 E_SOURCE -D_LARG\n 0x000022b8 4546494c 4536345f 534f5552 4345202d EFILE64_SOURCE -\n 0x000022c8 445f4649 4c455f4f 46465345 545f4249 D_FILE_OFFSET_BI\n@@ -124,15 +124,15 @@\n 0x00002328 55524345 202d445f 4c415247 4546494c URCE -D_LARGEFIL\n 0x00002338 4536345f 534f5552 4345202d 445f4649 E64_SOURCE -D_FI\n 0x00002348 4c455f4f 46465345 545f4249 54533d36 LE_OFFSET_BITS=6\n 0x00002358 34272027 5045524c 3d2f7573 722f6269 4' 'PERL=/usr/bi\n 0x00002368 6e2f7065 726c2720 27435050 3d2f686f n/perl' 'CPP=/ho\n 0x00002378 6d652f61 75746f62 75696c64 2f617574 me/autobuild/aut\n 0x00002388 6f627569 6c642f69 6e737461 6e63652d obuild/instance-\n- 0x00002398 31382f6f 75747075 742d312f 686f7374 18/output-1/host\n+ 0x00002398 31382f6f 75747075 742d322f 686f7374 18/output-2/host\n 0x000023a8 2f62696e 2f61726d 65622d62 75696c64 /bin/armeb-build\n 0x000023b8 726f6f74 2d6c696e 75782d67 6e756561 root-linux-gnuea\n 0x000023c8 62696866 2d637070 27000000 436f6e66 bihf-cpp'...Conf\n 0x000023d8 69677572 65642077 6974683a 2025730a igured with: %s.\n 0x000023e8 00000000 57726974 74656e20 62792052 ....Written by R\n 0x000023f8 656d6920 44656e69 732d436f 75726d6f emi Denis-Courmo\n 0x00002408 6e740a00 436f7079 72696768 74202843 nt..Copyright (C\n"}]}, {"source1": "./usr/bin/vtysh", "source2": "./usr/bin/vtysh", "unified_diff": null, "details": [{"source1": "/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-readelf --wide --program-header {} [\u2026]", "source2": "/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-readelf --wide --program-header {} [\u2026]", "unified_diff": "@@ -1,19 +1,19 @@\n \n Elf file type is DYN (Position-Independent Executable file)\n Entry point 0xe214\n There are 9 program headers, starting at offset 52\n \n Program Headers:\n Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align\n- EXIDX 0x0b0a50 0x000b0a50 0x000b0a50 0x00008 0x00008 R 0x4\n+ EXIDX 0x0b0990 0x000b0990 0x000b0990 0x00008 0x00008 R 0x4\n PHDR 0x000034 0x00000034 0x00000034 0x00120 0x00120 R 0x4\n INTERP 0x000154 0x00000154 0x00000154 0x00019 0x00019 R 0x1\n [Requesting program interpreter: /lib/ld-linux-armhf.so.3]\n- LOAD 0x000000 0x00000000 0x00000000 0xb0a5c 0xb0a5c R E 0x1000\n+ LOAD 0x000000 0x00000000 0x00000000 0xb099c 0xb099c R E 0x1000\n LOAD 0x0b0ca4 0x000b1ca4 0x000b1ca4 0x10e34 0x121f4 RW 0x1000\n DYNAMIC 0x0b0cac 0x000b1cac 0x000b1cac 0x00138 0x00138 RW 0x4\n NOTE 0x000170 0x00000170 0x00000170 0x00020 0x00020 R 0x4\n GNU_STACK 0x000000 0x00000000 0x00000000 0x00000 0x00000 RW 0x10\n GNU_RELRO 0x0b0ca4 0x000b1ca4 0x000b1ca4 0x0035c 0x0035c R 0x1\n \n Section to Segment mapping:\n"}, {"source1": "/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-readelf --wide --sections {}", "source2": "/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-readelf --wide --sections {}", "unified_diff": "@@ -11,19 +11,19 @@\n [ 6] .dynstr STRTAB 00001014 001014 0007b6 00 A 0 0 1\n [ 7] .gnu.version VERSYM 000017ca 0017ca 00012c 02 A 5 0 2\n [ 8] .gnu.version_r VERNEED 000018f8 0018f8 000080 00 A 6 2 4\n [ 9] .rel.dyn REL 00001978 001978 00b588 08 A 5 0 4\n [10] .rel.plt REL 0000cf00 00cf00 000370 08 AI 5 21 4\n [11] .init PROGBITS 0000d270 00d270 00000c 00 AX 0 0 4\n [12] .plt PROGBITS 0000d27c 00d27c 00053c 04 AX 0 0 4\n- [13] .text PROGBITS 0000d7b8 00d7b8 0149e4 00 AX 0 0 4\n- [14] .fini PROGBITS 0002219c 02219c 000008 00 AX 0 0 4\n- [15] .rodata PROGBITS 000221a4 0221a4 08e8ac 00 A 0 0 4\n- [16] .ARM.exidx ARM_EXIDX 000b0a50 0b0a50 000008 00 AL 13 0 4\n- [17] .eh_frame PROGBITS 000b0a58 0b0a58 000004 00 A 0 0 4\n+ [13] .text PROGBITS 0000d7b8 00d7b8 014924 00 AX 0 0 4\n+ [14] .fini PROGBITS 000220dc 0220dc 000008 00 AX 0 0 4\n+ [15] .rodata PROGBITS 000220e4 0220e4 08e8ac 00 A 0 0 4\n+ [16] .ARM.exidx ARM_EXIDX 000b0990 0b0990 000008 00 AL 13 0 4\n+ [17] .eh_frame PROGBITS 000b0998 0b0998 000004 00 A 0 0 4\n [18] .init_array INIT_ARRAY 000b1ca4 0b0ca4 000004 04 WA 0 0 4\n [19] .fini_array FINI_ARRAY 000b1ca8 0b0ca8 000004 04 WA 0 0 4\n [20] .dynamic DYNAMIC 000b1cac 0b0cac 000138 08 WA 6 0 4\n [21] .got PROGBITS 000b1de4 0b0de4 00021c 04 WA 0 0 4\n [22] .data PROGBITS 000b2000 0b1000 010ad8 00 WA 0 0 4\n [23] .bss NOBITS 000c2ad8 0c1ad8 0013c0 00 WA 0 0 8\n [24] .ARM.attributes ARM_ATTRIBUTES 00000000 0c1ad8 000039 00 0 0 1\n"}, {"source1": "/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-readelf --wide --dynamic {}", "source2": "/home/autobuild/autobuild/instance-18/output-1/host/bin/armeb-buildroot-linux-gnueabihf-readelf --wide --dynamic {}", "unified_diff": "@@ -6,15 +6,15 @@\n 0x00000001 (NEEDED) Shared library: [libreadline.so.8]\n 0x00000001 (NEEDED) Shared library: [libncursesw.so.6]\n 0x00000001 (NEEDED) Shared library: [libcrypt.so.2]\n 0x00000001 (NEEDED) Shared library: [libc.so.6]\n 0x00000001 (NEEDED) Shared library: [ld-linux-armhf.so.3]\n 0x0000001d (RUNPATH) Library runpath: []\n 0x0000000c (INIT) 0xd270\n- 0x0000000d (FINI) 0x2219c\n+ 0x0000000d (FINI) 0x220dc\n 0x00000019 (INIT_ARRAY) 0xb1ca4\n 0x0000001b (INIT_ARRAYSZ) 4 (bytes)\n 0x0000001a (FINI_ARRAY) 0xb1ca8\n 0x0000001c (FINI_ARRAYSZ) 4 (bytes)\n 0x00000004 (HASH) 0x190\n 0x6ffffef5 (GNU_HASH) 0x5fc\n 0x00000005 (STRTAB) 0x1014\n"}, {"source1": "strings --all --bytes=8 {}", "source2": "strings --all --bytes=8 {}", "comments": ["Ordering differences only"], "unified_diff": "@@ -643,1109 +643,1208 @@\n ip protocol\n hostname\n (mnode)->data != ((void *)0)\n Ambiguous command.\n There is no such command.\n Error occurred during reading below line.\n hostname %s\n-auto-cost reference-bandwidth <1-4294967>\n-Calculate OSPF interface cost according to bandwidth\n-Use reference bandwidth method to assign OSPF cost\n-The reference bandwidth in terms of Mbits per second\n-no redistribute (kernel|connected|static|ospf6|isis|bgp|babel|nhrp) route-map WORD\n-Negate a command or set its defaults\n-Redistribute\n-Kernel routes (not installed via the zebra RIB)\n-Connected routes (directly attached subnet or host)\n-Statically configured routes\n-Open Shortest Path First (IPv6) (OSPFv3)\n-Intermediate System to Intermediate System (IS-IS)\n-Border Gateway Protocol (BGP)\n-Babel routing protocol (Babel)\n-Next Hop Resolution Protocol (NHRP)\n-Route map reference\n-Pointer to route-map entries\n-clear ip bgp * encap unicast out\n-Reset functions\n-IP information\n+bgp cluster-id <1-4294967295>\n BGP information\n-Clear all peers\n-Address family\n-Address Family Modifier\n-Soft reconfig outbound update\n-show ipv6 mbgp community-list WORD\n-Show running system information\n-IPv6 information\n-MBGP information\n-Display routes matching the community-list\n-community-list name\n-max-metric router-lsa on-startup <5-86400>\n-OSPF maximum / infinite-distance metric\n-Advertise own Router-LSA with infinite distance (stub router)\n-Automatically advertise stub Router-LSA on startup of OSPF\n-Time (seconds) to advertise self as stub-router\n-show ip bgp ipv4 (unicast|multicast) dampening flap-statistics\n+Configure Route-Reflector Cluster-id\n+Route-Reflector Cluster-id as 32 bit quantity\n+no route IPV6ADDR\n+Negate a command or set its defaults\n+Static route setup\n+Delete static RIPng route announcement\n+show ip bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export)\n Show running system information\n IP information\n BGP information\n Address family\n Address Family modifier\n Address Family modifier\n-Display detailed information about dampening\n-Display flap statistics of routes\n-ip route A.B.C.D A.B.C.D (reject|blackhole) <1-255>\n-IP information\n-Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Distance value for this route\n-no ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole)\n+Display routes matching the communities\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+no auto-cost reference-bandwidth\n+Negate a command or set its defaults\n+Calculate OSPF interface cost according to bandwidth\n+Use reference bandwidth method to assign OSPF cost\n+router-info as\n+OSPF Router Information specific commands\n+Enable the Router Information functionality with AS flooding scope\n+neighbor (A.B.C.D|X:X::X:X|WORD) dont-capability-negotiate\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Do not perform capability negotiation\n+no (ip|ipv6) nhrp network-id [<1-4294967295>]\n Negate a command or set its defaults\n IP information\n-Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n-IP gateway address\n-IP gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-no debug isis protocol-errors\n-Disable debugging functions (see also 'debug')\n-IS-IS information\n-IS-IS LSP protocol errors\n-ipv6 nd reachable-time <1-3600000>\n-Interface IPv6 config commands\n-Neighbor discovery\n-Reachable time\n-Reachable time in milliseconds\n-show bgp ipv6 (encap|multicast|unicast|vpn) dampening flap-statistics regexp .LINE\n+IPv6 information\n+Next Hop Resolution Protocol functions\n+Enable NHRP and specify network-id\n+System local ID to specify interface group\n+show ip bgp neighbors (A.B.C.D|X:X::X:X)\n Show running system information\n+IP information\n BGP information\n-IPv6 information\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Display detailed information about dampening\n-Display flap statistics of routes\n-Display routes matching the AS path regular expression\n-A regular-expression to match the BGP AS paths\n-no timers basic <0-65535> <0-65535> <0-65535>\n-Negate a command or set its defaults\n-RIPng timers setup\n-Basic timer\n-Routing table update timer value in second. Default is 30.\n-Routing information timeout timer. Default is 180.\n-Garbage collection timer. Default is 120.\n-ipv6 nd managed-config-flag\n-Interface IPv6 config commands\n-Neighbor discovery\n-Managed address configuration flag\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+show ipv6 route X:X::X:X/M longer-prefixes vrf <0-65535>\n+Show running system information\n+IP information\n+IPv6 routing table\n+IPv6 prefix\n+Show route matching the specified Network/Mask pair only\n+Specify the VRF\n+The VRF ID\n show bgp ipv4 (unicast|multicast) rsclient (A.B.C.D|X:X::X:X) A.B.C.D/M\n Show running system information\n BGP information\n Address family\n Address Family modifier\n Address Family modifier\n Information about Route Server Client\n Neighbor address\n IPv6 address\n IP prefix /, e.g., 35.0.0.0/8\n-clear ip bgp <1-4294967295> ipv4 (unicast|multicast) soft in\n-Reset functions\n-IP information\n-BGP information\n-Clear peers with the AS number\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Soft reconfig inbound and outbound updates\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-no ip multicast-routing\n-Negate a command or set its defaults\n-IP information\n-Global IP configuration subcommands\n-Enable IP multicast forwarding\n-no ipv6 route X:X::X:X/M X:X::X:X INTERFACE tag <1-4294967295> <1-255>vrf <0-65535>\n-Negate a command or set its defaults\n-IP information\n-Establish static routes\n-IPv6 destination prefix (e.g. 3ffe:506::/32)\n-IPv6 gateway address\n-IPv6 gateway interface name\n-Set tag for this route\n-Tag value\n-Distance value for this prefix\n-Specify the VRF\n-The VRF ID\n-no tunnel source\n-NHRP/GRE integration\n-Tunnel device binding tracking\n-Interface name\n-ip rip authentication string LINE\n-IP information\n-Routing Information Protocol\n-Authentication control\n-Authentication string\n-Authentication string\n-show bgp ipv4 (encap|multicast|unicast|vpn) flap-statistics\n-Show running system information\n-BGP information\n-Address Family\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Display flap statistics of routes\n-Specify a network to announce via BGP\n-IPv6 prefix /\n-no ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE|null0) tag <1-4294967295> <1-255>vrf <0-65535>\n-Negate a command or set its defaults\n-IP information\n-Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n-IP gateway address\n-IP gateway interface name\n-Null interface\n-Tag of this route\n-Tag value\n-Distance value for this route\n-Specify the VRF\n-The VRF ID\n-debug bgp updates (in|out)\n-Debugging functions (see also 'undebug')\n-BGP information\n-BGP updates\n-Inbound updates\n-Outbound updates\n-ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) tag <1-4294967295> <1-255>vrf <0-65535>\n-IP information\n-Establish static routes\n-IPv6 destination prefix (e.g. 3ffe:506::/32)\n-IPv6 gateway address\n-IPv6 gateway interface name\n-Set tag for this route\n-Tag value\n-Distance value for this prefix\n-Specify the VRF\n-The VRF ID\n-no ip large-community-list expanded WORD (deny|permit) .LINE\n-Negate a command or set its defaults\n+ip large-community-list standard WORD (deny|permit) .AA:BB.CC\n IP information\n Add a large community list entry\n-Specify expanded large-community-list\n-Large community list name\n+Specify standard large-community-list\n+Large Community list name\n Specify large community to reject\n Specify large community to accept\n-An ordered list as a regular-expression\n-show bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n-Show running system information\n-BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-show ipv6 route (kernel|connected|static|ripng|ospf6|isis|bgp|babel|nhrp) vrf <0-65535>\n+large community in 'aa:bb:cc' format\n+show ip pim secondary\n Show running system information\n IP information\n-IP routing table\n-Kernel routes (not installed via the zebra RIB)\n-Connected routes (directly attached subnet or host)\n-Statically configured routes\n-Routing Information Protocol next-generation (IPv6) (RIPng)\n-Open Shortest Path First (IPv6) (OSPFv3)\n-Intermediate System to Intermediate System (IS-IS)\n-Border Gateway Protocol (BGP)\n-Babel routing protocol (Babel)\n-Next Hop Resolution Protocol (NHRP)\n-Specify the VRF\n-The VRF ID\n-show debugging ripng\n-Show running system information\n-Debugging functions (see also 'undebug')\n-RIPng configuration\n-no bgp graceful-restart restart-time\n-Negate a command or set its defaults\n-BGP specific commands\n-Graceful restart capability parameters\n-Set the time to wait to delete stale routes before a BGP open message is received\n-isis network point-to-point\n-IS-IS commands\n-Set network type\n-point-to-point network type\n-show bgp ipv6 community\n-Show running system information\n-BGP information\n-Address family\n-Display routes matching the communities\n-show bgp ipv6 rsclient summary\n+PIM information\n+PIM neighbor addresses\n+show ip pim lan-prune-delay\n Show running system information\n-BGP information\n-Address family\n-Information about Route Server Clients\n-Summary of all Route Server Clients\n-no bgp graceful-restart stalepath-time\n-Negate a command or set its defaults\n-BGP specific commands\n-Graceful restart capability parameters\n-Set the max time to hold onto restarting peer's stale paths\n-no isis psnp-interval <1-120> level-1\n-Negate a command or set its defaults\n-IS-IS commands\n-Set PSNP interval in seconds\n-PSNP interval value\n-Specify interval for level-1 PSNPs\n-show ip bgp view WORD neighbors\n+IP information\n+PIM information\n+PIM neighbors LAN prune delay parameters\n+show ip bgp neighbors (A.B.C.D|X:X::X:X) advertised-routes\n Show running system information\n IP information\n BGP information\n-BGP view\n-View name\n Detailed information on TCP and BGP neighbor connections\n-no match ip address\n-Negate a command or set its defaults\n-Match values from routing table\n-IP information\n-Match address of route\n-show ipv6 route X:X::X:X/M vrf all\n-Show running system information\n-IP information\n-IPv6 routing table\n-IPv6 prefix\n-Specify the VRF\n-All VRFs\n-no isis psnp-interval <1-120> level-2\n-Negate a command or set its defaults\n-IS-IS commands\n-Set PSNP interval in seconds\n-PSNP interval value\n-Specify interval for level-2 PSNPs\n-default-metric <1-16>\n-Set a metric of redistribute routes\n-Default metric\n-no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (authentication-key|)\n-Negate a command or set its defaults\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Configure a virtual link\n-Router ID of the remote ABR\n-Authentication password (key)\n-The OSPF password (key)\n-show bgp ipv4 community-list (<1-500>|WORD) exact-match\n+Neighbor to display information about\n+Neighbor to display information about\n+Display the routes advertised to a BGP neighbor\n+show ipv6 bgp large-community\n Show running system information\n+IPv6 information\n BGP information\n-IP information\n-Display routes matching the community-list\n-community-list number\n-community-list name\n-Exact match of the communities\n-show bgp view WORD (ipv4|ipv6) (encap|mulicast|unicast|vpn)\n+Display routes matching the large-communities\n+no set-attached-bit\n+Reset attached bit\n+bgp bestpath med (confed|missing-as-worst)\n+BGP specific commands\n+Change the default bestpath selection\n+MED attribute\n+Compare MED among confederation paths\n+Treat missing MED as the least preferred one\n+debug isis route-events\n+Debugging functions (see also 'undebug')\n+IS-IS information\n+IS-IS Route related events\n+neighbor (A.B.C.D|X:X::X:X|WORD) maximum-prefix <1-4294967295> warning-only\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Maximum number of prefix accept from this peer\n+maximum no. of prefix limit\n+Only give warning message when limit is exceeded\n+show bgp ipv4 (encap|multicast|unicast|vpn) flap-statistics cidr-only\n Show running system information\n BGP information\n-BGP view\n-BGP view name\n-Address Family\n Address Family\n Address Family Modifier\n Address Family Modifier\n Address Family Modifier\n Address Family Modifier\n-show ipv6 bgp large-community (AA:BB:CC)\n+Display flap statistics of routes\n+Display only routes with non-natural netmasks\n+ipv6 nd ra-interval msec <70-1800000>\n+Interface IPv6 config commands\n+Neighbor discovery\n+Router Advertisement interval\n+Router Advertisement interval in milliseconds\n+show ipv6 mbgp X:X::X:X/M\n Show running system information\n-IPv6 information\n-BGP information\n-Display routes matching the large-communities\n-large-community number\n-no area (A.B.C.D|<0-4294967295>) range A.B.C.D/M advertise cost <0-16777215>\n+IP information\n+MBGP information\n+IPv6 prefix /, e.g., 3ffe::/16\n+no debug ospf ism\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+OSPF information\n+OSPF Interface State Machine\n+admin-grp BITPATTERN\n+Administrative group membership\n+32-bit Hexadecimal value (e.g. 0xa1)\n+ip irdp debug messages\n+IP information\n+ICMP Router discovery debug Averts. and Solicits (short)\n+no area (A.B.C.D|<0-4294967295>) shortcut (enable|disable)\n Negate a command or set its defaults\n OSPF area parameters\n OSPF area ID in IP address format\n OSPF area ID as a decimal value\n-Summarize routes matching address/mask (border routers only)\n-Area range prefix\n-Advertise this range (default)\n-User specified metric for this range\n-Advertised metric for this range\n-log commands\n-Logging control\n-Log all commands (can't be unset without restart)\n-no debug isis lsp-gen\n-Disable debugging functions (see also 'debug')\n-IS-IS information\n-IS-IS scheduling of LSP generation\n-no ava-bw\n-Negate a command or set its defaults\n-Disable Unidirectional Available Bandwidth on this interface\n-show bgp ipv4 (encap|vpn) rd ASN:nn_or_IP-address:nn A.B.C.D\n+Deconfigure the area's shortcutting mode\n+Deconfigure enabled shortcutting through the area\n+Deconfigure disabled shortcutting through the area\n+show bgp ipv4 (encap|multicast|unicast|vpn) dampening flap-statistics route-map WORD\n Show running system information\n BGP information\n-Address Family\n+IP information\n Address Family Modifier\n Address Family Modifier\n-Display information for a route distinguisher\n-ENCAP Route Distinguisher\n-Network in the BGP routing table to display\n-show ip pim secondary\n-Show running system information\n-IP information\n-PIM information\n-PIM neighbor addresses\n-no ipv6 route X:X::X:X/M X:X::X:X INTERFACE <1-255> vrf <0-65535>\n+Address Family Modifier\n+Address Family Modifier\n+Display detailed information about dampening\n+Display flap statistics of routes\n+Display routes matching the route-map\n+A route-map to match on\n+bgp dampening <1-45>\n+BGP Specific commands\n+Enable route-flap dampening\n+Half-life time for the penalty\n+neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged as-path (next-hop|med)\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+BGP attribute is propagated unchanged to this neighbor\n+As-path attribute\n+Nexthop attribute\n+Med attribute\n+no ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE)\n Negate a command or set its defaults\n IP information\n Establish static routes\n IPv6 destination prefix (e.g. 3ffe:506::/32)\n IPv6 gateway address\n IPv6 gateway interface name\n-Distance value for this prefix\n-Specify the VRF\n-The VRF ID\n-show debugging nhrp\n-Show running system information\n-Debugging information\n-NHRP configuration\n-ipv6 ripng split-horizon\n-IPv6 information\n-Routing Information Protocol\n-Perform split horizon\n-show isis neighbor WORD\n-Show running system information\n-ISIS network information\n-ISIS neighbor adjacencies\n-System id\n-no spf-interval\n-Negate a command or set its defaults\n-Minimum interval between SPF calculations\n-show bgp view WORD (ipv4|ipv6) (encap|multicast|unicast|vpn) statistics\n-Show running system information\n+clear ip bgp A.B.C.D ipv4 (unicast|multicast) soft out\n+Reset functions\n+IP information\n BGP information\n-BGP view\n-Address family\n+BGP neighbor address to clear\n Address family\n Address Family modifier\n Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-BGP RIB advertisement statistics\n-ip ospf mtu-ignore A.B.C.D\n-IP Information\n-OSPF interface commands\n-Disable mtu mismatch detection\n-Address of interface\n-clear ip bgp * ipv4 (unicast|multicast) in\n+Soft reconfig inbound and outbound updates\n+Resend all outbound updates\n+no admin-grp\n+Negate a command or set its defaults\n+Disable Administrative group membership on this interface\n+no pce domain as <0-65535>\n+Negate a command or set its defaults\n+PCE Router Information specific commands\n+Disable PCE domain AS number\n+AS number where the PCE as visibilities for path computation\n+AS number in decimal <0-65535>\n+redistribute ospf6\n+Redistribute control\n+OSPF6 route\n+clear ip bgp view WORD * soft in\n Reset functions\n IP information\n BGP information\n+BGP view\n+view name\n Clear all peers\n-Address family\n-Address Family modifier\n-Address Family modifier\n+Soft reconfig inbound and outbound updates\n Send route-refresh unless using 'soft-reconfiguration inbound'\n-show bgp ipv4 route-map WORD\n-Show running system information\n-BGP information\n-IP information\n-Display routes matching the route-map\n-A route-map to match on\n-clear bgp ipv6 * soft\n+network X:X::X:X/M route-map WORD\n+Specify a network to announce via BGP\n+IPv6 prefix /\n+Route-map to modify the attributes\n+Name of the route map\n+clear bgp <1-4294967295> soft in\n Reset functions\n BGP information\n-Address family\n-Clear all peers\n+Clear peers with the AS number\n Soft reconfig inbound and outbound updates\n-show bgp view WORD X:X::X:X\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+neighbor (A.B.C.D|X:X::X:X|WORD) nexthop-local unchanged\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Configure treatment of outgoing link-local nexthop attribute\n+Leave link-local nexthop unchanged for this peer\n+show ip bgp dampening dampened-paths\n Show running system information\n+IP information\n BGP information\n-BGP view\n-View name\n-Network in the BGP routing table to display\n-no ip ospf cost <1-65535>\n-Negate a command or set its defaults\n-IP Information\n-OSPF interface commands\n-Interface cost\n-show interface IFNAME vrf all\n-Show running system information\n-Interface status and configuration\n-Interface name\n-Specify the VRF\n-All VRFs\n-show bgp ipv6 prefix-list WORD\n-Show running system information\n+Display detailed information about dampening\n+Display paths suppressed due to dampening\n+clear ip bgp view WORD * ipv4 (unicast|multicast) soft\n+Reset functions\n+IP information\n BGP information\n+BGP view\n+view name\n+Clear all peers\n Address family\n-Display routes conforming to the prefix-list\n-IPv6 prefix-list name\n-ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole) vrf <0-65535>\n-IP information\n-Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n-IP gateway address\n-IP gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Specify the VRF\n-The VRF ID\n-no set pathlimit ttl <1-255>\n-Negate a command or set its defaults\n-Match values from routing table\n-BGP AS-Pathlimit attribute\n-Set AS-Path Hop-count TTL\n-show ipv6 ospf6 route (X:X::X:X|X:X::X:X/M|detail|summary)\n+Address Family Modifier\n+Address Family Modifier\n+Soft reconfig inbound and outbound updates\n+ipv6 nd ra-lifetime <0-9000>\n+Interface IPv6 config commands\n+Neighbor discovery\n+Router lifetime\n+Router lifetime in seconds (0 stands for a non-default gw)\n+show ipv6 ospf6 interface IFNAME prefix X:X::X:X/M (match|detail)\n Show running system information\n IPv6 Information\n Open Shortest Path First (OSPF) for IPv6\n-Routing Table\n-Specify IPv6 address\n-Specify IPv6 prefix\n-Detailed information\n-Summary of route table\n-no isis hello-multiplier <2-100> level-1\n-Negate a command or set its defaults\n-IS-IS commands\n-Set multiplier for Hello holding time\n-Hello multiplier value\n-Specify hello multiplier for level-1 IIHs\n-show ipv6 mbgp\n-Show running system information\n+Interface information\n+Interface name(e.g. ep0)\n+Display connected prefixes to advertise\n+Display the route\n+Display the route matches the prefix\n+Display details of the prefixes\n+clear ip bgp * encap unicast out\n+Reset functions\n IP information\n-MBGP information\n-ipv6 prefix-list WORD seq <1-4294967295> (deny|permit) X:X::X:X/M ge <0-128>\n-IPv6 information\n-Build a prefix list\n-Name of a prefix list\n-sequence number of an entry\n-Sequence number\n-Specify packets to reject\n-Specify packets to forward\n-IPv6 prefix /, e.g., 3ffe::/16\n-Minimum prefix length to be matched\n-Minimum prefix length\n-show bgp ipv6 community-list (<1-500>|WORD)\n-Show running system information\n-BGP information\n-Address family\n-Display routes matching the community-list\n-community-list number\n-community-list name\n-show bgp ipv6 (unicast|multicast) X:X::X:X/M (bestpath|multipath)\n-Show running system information\n BGP information\n+Clear all peers\n Address family\n-Address Family modifier\n-Address Family modifier\n-IPv6 prefix /, e.g., 3ffe::/16\n-Display only the bestpath\n-Display only multipaths\n-no router ripng\n-Negate a command or set its defaults\n-Enable a routing process\n-Make RIPng instance command\n-no ip mroute INTERFACE A.B.C.D\n-Negate a command or set its defaults\n+Address Family Modifier\n+Soft reconfig outbound update\n+default-metric <1-16>\n+Set a metric of redistribute routes\n+Default metric\n+area A.B.C.D import-list NAME\n+OSPFv6 area parameters\n+OSPFv6 area ID in IP address format\n+Set the filter for networks from other areas announced to the specified one\n+Name of the acess-list\n+ip community-list expanded WORD (deny|permit) .LINE\n IP information\n-Add multicast route\n-Outgoing interface name\n-Group Address\n-no debug ospf6 interface\n-Negate a command or set its defaults\n+Add a community list entry\n+Add an expanded community-list entry\n+Community list name\n+Specify community to reject\n+Specify community to accept\n+An ordered list as a regular-expression\n+debug pim events\n+Debugging functions (see also 'undebug')\n+PIM protocol activity\n+PIM protocol events\n+set extcommunity soo .ASN:nn_or_IP-address:nn\n+Set values in destination routing protocol\n+BGP extended community attribute\n+Site-of-Origin extended community\n+VPN extended community\n+debug ospf6 lsa (router|network|inter-prefix|inter-router|as-ext|grp-mbr|type7|link|intra-prefix|unknown)\n Debugging functions (see also 'undebug')\n Open Shortest Path First (OSPF) for IPv6\n-Debug OSPFv3 Interface\n-no ip large-community-list <100-500>\n+Debug Link State Advertisements (LSAs)\n+Specify LS type as Hexadecimal\n+no bgp confederation identifier\n Negate a command or set its defaults\n-IP information\n-Add a large community list entry\n-Large Community list number (expanded)\n-set ip next-hop peer-address\n-Set values in destination routing protocol\n-IP information\n-Next hop address\n-Use peer address (for BGP only)\n-show ip bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n+BGP specific commands\n+AS confederation parameters\n+AS number\n+show ipv6 mbgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n Show running system information\n-IP information\n-BGP information\n+IPv6 information\n+MBGP information\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-Exact match of the communities\n-show ipv6 route summary prefix vrf all\n-Show running system information\n-IP information\n-IPv6 routing table\n-Summary of all IPv6 routes\n-Prefix routes\n-Specify the VRF\n-All VRFs\n-neighbor (A.B.C.D|X:X::X:X|WORD) maximum-prefix <1-4294967295> restart <1-65535>\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Maximum number of prefix accept from this peer\n-maximum no. of prefix limit\n-Restart bgp connection after limit is exceeded\n-Restart interval in minutes\n-show bgp ipv6 community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n-Show running system information\n-BGP information\n-Address family\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-Exact match of the communities\n-no route-map ROUTEMAP_NAME (in|out) IFNAME\n+access-list (<1-99>|<1300-1999>) (deny|permit) host A.B.C.D\n+Add an access list entry\n+IP standard access list\n+IP standard access list (expanded range)\n+Specify packets to reject\n+Specify packets to forward\n+A single host address\n+Address to match\n+no ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole) tag <1-4294967295> <1-255>\n Negate a command or set its defaults\n-Route map unset\n-Route map name\n-Route map for input filtering\n-Route map for output filtering\n-Route map interface name\n-redistribute (kernel|connected|static|rip|ospf|isis|pim|babel|nhrp) route-map WORD\n-Redistribute information from another routing protocol\n+IP information\n+Establish static routes\n+IP destination prefix\n+IP destination prefix mask\n+IP gateway address\n+IP gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Tag of this route\n+Tag value\n+Distance value for this route\n+no ipv6 access-class [WORD]\n+Negate a command or set its defaults\n+IPv6 information\n+Filter connections based on an IP access list\n+IPv6 access list\n+no debug isis adj-packets\n+Disable debugging functions (see also 'debug')\n+IS-IS information\n+IS-IS Adjacency related packets\n+no timers basic\n+Negate a command or set its defaults\n+Adjust routing timers\n+Basic routing protocol update timers\n+no router-id\n+Negate a command or set its defaults\n+router-id for the OSPF process\n+redistribute (kernel|connected|static|ripng|isis|bgp|babel|nhrp)\n+Redistribute\n Kernel routes (not installed via the zebra RIB)\n Connected routes (directly attached subnet or host)\n Statically configured routes\n-Routing Information Protocol (RIP)\n-Open Shortest Path First (OSPFv2)\n+Routing Information Protocol next-generation (IPv6) (RIPng)\n Intermediate System to Intermediate System (IS-IS)\n-Protocol Independent Multicast (PIM)\n+Border Gateway Protocol (BGP)\n Babel routing protocol (Babel)\n Next Hop Resolution Protocol (NHRP)\n-Route map reference\n-Pointer to route-map entries\n-debug pim packets (hello|joins)\n-Debugging functions (see also 'undebug')\n-PIM protocol activity\n-PIM protocol packets\n-PIM Hello protocol packets\n-PIM Join/Prune protocol packets\n-clear ip bgp (A.B.C.D|X:X::X:X)\n-Reset functions\n-IP information\n-BGP information\n-BGP neighbor IP address to clear\n-BGP IPv6 neighbor to clear\n-no aggregate-address X:X::X:X/M\n+no ip community-list <100-500>\n Negate a command or set its defaults\n-Delete aggregate RIPng route announcement\n-Aggregate network\n-no link-detect\n+IP information\n+Add a community list entry\n+Community list number (expanded)\n+no distance <1-255> X:X::X:X/M\n Negate a command or set its defaults\n-Disable link detection on interface\n-show ip prefix-list WORD A.B.C.D/M\n+Define an administrative distance\n+Administrative distance\n+IP source prefix\n+show ip bgp A.B.C.D/M (bestpath|multipath)\n Show running system information\n IP information\n-Build a prefix list\n-Name of a prefix list\n+BGP information\n IP prefix /, e.g., 35.0.0.0/8\n-show ip bgp view WORD rsclient summary\n+Display only the bestpath\n+Display only multipaths\n+no ipv6 access-list WORD (deny|permit) X:X::X:X/M exact-match\n+Negate a command or set its defaults\n+IPv6 information\n+Add an access list entry\n+IPv6 zebra access-list\n+Specify packets to reject\n+Specify packets to forward\n+Prefix to match. e.g. 3ffe:506::/32\n+Exact match of the prefixes\n+show ipv6 ospf6 database * A.B.C.D (detail|dump|internal)\n Show running system information\n-IP information\n+IPv6 information\n+Open Shortest Path First (OSPF) for IPv6\n+Display Link state database\n+Any Link state Type\n+Specify Link state ID as IPv4 address notation\n+Display details of LSAs\n+Dump LSAs\n+Display LSA's internal information\n+clear bgp view WORD *\n+Reset functions\n BGP information\n BGP view\n-View name\n-Information about Route Server Clients\n-Summary of all Route Server Clients\n-show bgp X:X::X:X (bestpath|multipath)\n-Show running system information\n+view name\n+Clear all peers\n+clear ip bgp external soft out\n+Reset functions\n+IP information\n BGP information\n-Network in the BGP routing table to display\n-Display only the bestpath\n-Display only multipaths\n-no set metric <+/-metric>\n-Negate a command or set its defaults\n-Set values in destination routing protocol\n-Metric value for destination routing protocol\n-Add or subtract metric\n-no set originator-id A.B.C.D\n-Negate a command or set its defaults\n-Set values in destination routing protocol\n-BGP originator ID attribute\n-IP address of originator\n-no neighbor (A.B.C.D|X:X::X:X|WORD) weight <0-65535>\n+Clear all external peers\n+Soft reconfig inbound and outbound updates\n+Resend all outbound updates\n+ipv6 route X:X::X:X/M X:X::X:X INTERFACE (reject|blackhole)\n+IP information\n+Establish static routes\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+clear ip bgp peer-group WORD ipv4 (unicast|multicast) out\n+Reset functions\n+IP information\n+BGP information\n+Clear all members of peer-group\n+BGP peer-group name\n+Address family\n+Address Family modifier\n+Address Family modifier\n+Resend all outbound updates\n+show ipv6 ospf6 neighbor (detail|drchoice)\n+Show running system information\n+IPv6 Information\n+Open Shortest Path First (OSPF) for IPv6\n+Neighbor list\n+Display details\n+Display DR choices\n+no neighbor (A.B.C.D|X:X::X:X) peer-group WORD\n Negate a command or set its defaults\n Specify neighbor router\n Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Set default weight for routes from this neighbor\n-default weight\n-show bgp ipv6 encap neighbors A.B.C.D advertised-routes\n+IPv6 address\n+Member of the peer-group\n+peer-group name\n+ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) (reject|blackhole) <1-255> vrf <0-65535>\n+IP information\n+Establish static routes\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Distance value for this prefix\n+Specify the VRF\n+The VRF ID\n+no ipv6 nd ra-interval msec <1-1800000>\n+Negate a command or set its defaults\n+Interface IPv6 config commands\n+Neighbor discovery\n+Router Advertisement interval\n+Router Advertisement interval in milliseconds\n+show bgp ipv6 encap rd ASN:nn_or_IP-address:nn neighbors (A.B.C.D|X:X::X:X) routes\n Show running system information\n BGP information\n Address Family\n Display ENCAP NLRI specific information\n+Display information for a route distinguisher\n+ENCAP Route Distinguisher\n Detailed information on TCP and BGP neighbor connections\n Neighbor to display information about\n-Display the routes advertised to a BGP neighbor\n-show ip bgp neighbors (A.B.C.D|X:X::X:X)\n-Show running system information\n+Neighbor to display information about\n+Display routes learned from neighbor\n+no debug pim zebra\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+PIM protocol activity\n+ZEBRA protocol activity\n+clear isis neighbor WORD\n+Reset functions\n+ISIS network information\n+ISIS neighbor adjacencies\n+System id\n+no neighbor (A.B.C.D|X:X::X:X|WORD) maximum-prefix <1-4294967295> <1-100> restart <1-65535>\n+Negate a command or set its defaults\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Maximum number of prefix accept from this peer\n+maximum no. of prefix limit\n+Threshold value (%) at which to generate a warning msg\n+Restart bgp connection after limit is exceeded\n+Restart interval in minutes\n+no network X:X::X:X/M\n+Negate a command or set its defaults\n+Specify a network to announce via BGP\n+IPv6 prefix /\n+ip nhrp mtu (<576-1500>|opennhrp)\n IP information\n+Next Hop Resolution Protocol functions\n+Configure NHRP advertised MTU\n+MTU value\n+Advertise bound interface MTU similar to OpenNHRP\n+refresh timer <10-1800>\n+Adjust refresh parameters\n+Set refresh timer\n+Timer value in seconds\n+show bgp neighbors (A.B.C.D|X:X::X:X) flap-statistics\n+Show running system information\n BGP information\n Detailed information on TCP and BGP neighbor connections\n Neighbor to display information about\n Neighbor to display information about\n-show ip bgp ipv4 (unicast|multicast) regexp .LINE\n+Display flap statistics of the routes learned from neighbor\n+no neighbor A.B.C.D priority <0-255>\n+Negate a command or set its defaults\n+Specify neighbor router\n+Neighbor IP address\n+Neighbor Priority\n+Priority\n+show ipv6 mbgp community-list WORD exact-match\n Show running system information\n+IPv6 information\n+MBGP information\n+Display routes matching the community-list\n+community-list name\n+Exact match of the communities\n+neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged next-hop med as-path\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+BGP attribute is propagated unchanged to this neighbor\n+Nexthop attribute\n+Med attribute\n+As-path attribute\n+debug ospf6 interface\n+Debugging functions (see also 'undebug')\n+Open Shortest Path First (OSPF) for IPv6\n+Debug OSPFv3 Interface\n+lsp-gen-interval <1-120>\n+Minimum interval between regenerating same LSP\n+Minimum interval in seconds\n+no debug isis snp-packets\n+Disable debugging functions (see also 'debug')\n+IS-IS information\n+IS-IS CSNP/PSNP packets\n+neighbor (A.B.C.D|X:X::X:X|WORD) maximum-prefix <1-4294967295> <1-100> restart <1-65535>\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Maximum number of prefix accept from this peer\n+maximum no. of prefix limit\n+Threshold value (%) at which to generate a warning msg\n+Restart bgp connection after limit is exceeded\n+Restart interval in minutes\n+distance ospf6 external <1-255> intra-area <1-255>\n+Define an administrative distance\n+OSPF6 Administrative distance\n+External routes\n+Distance for external routes\n+Intra-area routes\n+Distance for intra-area routes\n+ip prefix-list sequence-number\n IP information\n+Build a prefix list\n+Include/exclude sequence numbers in NVGEN\n+distance <1-255>\n+Negate a command or set its defaults\n+Define an administrative distance\n+OSPF6 Administrative distance\n+no ipv6 nd home-agent-lifetime <0-65520>\n+Negate a command or set its defaults\n+Interface IPv6 config commands\n+Neighbor discovery\n+Home Agent lifetime\n+Home Agent lifetime in seconds (0 to track ra-lifetime)\n+clear bgp external soft out\n+Reset functions\n BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Display routes matching the AS path regular expression\n-A regular-expression to match the BGP AS paths\n-show bgp ipv6 large-community (AA:BB:CC)\n-Show running system information\n-BGP information\n-Address family\n-Display routes matching the large-communities\n-large-community number\n-no bgp client-to-client reflection\n+Clear all external peers\n+Soft reconfig inbound and outbound updates\n+Resend all outbound updates\n+neighbor (A.B.C.D|X:X::X:X|WORD) maximum-prefix <1-4294967295> <1-100> warning-only\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Maximum number of prefix accept from this peer\n+maximum no. of prefix limit\n+Threshold value (%) at which to generate a warning msg\n+Only give warning message when limit is exceeded\n+no area (A.B.C.D|<0-4294967295>) export-list NAME\n Negate a command or set its defaults\n-BGP specific commands\n-Configure client to client route reflection\n-reflection of routes allowed\n-show bgp ipv6 (encap|multicast|unicast|vpn) flap-statistics A.B.C.D\n+OSPF area parameters\n+OSPF area ID in IP address format\n+OSPF area ID as a decimal value\n+Unset the filter for networks announced to other areas\n+Name of the access-list\n+show bgp ipv4 (unicast|multicast) large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n Show running system information\n BGP information\n Address family\n Address Family modifier\n Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Display flap statistics of routes\n-Network in the BGP routing table to display\n-no timers throttle spf\n-Negate a command or set its defaults\n-Adjust routing timers\n-Throttling adaptive timer\n-OSPF SPF timers\n-clear ip bgp peer-group WORD ipv4 (unicast|multicast) soft out\n-Reset functions\n+Display routes matching the large-communities\n+large-community number\n+large-community number\n+large-community number\n+undebug bgp updates\n+Disable debugging functions (see also 'debug')\n+BGP information\n+BGP updates\n+show ip rpf A.B.C.D vrf <0-65535>\n+Show running system information\n+IP information\n+Display RPF information for multicast source\n+IP multicast source address (e.g. 10.0.0.0)\n+Specify the VRF\n+The VRF ID\n+show ip ospf router-info\n+Show running system information\n IP information\n+OSPF information\n+Router Information\n+clear bgp ipv6 peer-group WORD soft in\n+Reset functions\n BGP information\n+Address family\n Clear all members of peer-group\n BGP peer-group name\n-Address family\n-Address Family modifier\n-Address Family modifier\n Soft reconfig inbound and outbound updates\n-Resend all outbound updates\n-no ipv6 nd home-agent-lifetime\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+ipv6 prefix-list WORD seq <1-4294967295> (deny|permit) (X:X::X:X/M|any)\n+IPv6 information\n+Build a prefix list\n+Name of a prefix list\n+sequence number of an entry\n+Sequence number\n+Specify packets to reject\n+Specify packets to forward\n+IPv6 prefix /, e.g., 3ffe::/16\n+Any prefix match. Same as \"::0/0 le 128\"\n+no debug zebra rib\n Negate a command or set its defaults\n-Interface IPv6 config commands\n-Neighbor discovery\n-Home Agent lifetime\n-area (A.B.C.D|<0-4294967295>) nssa no-summary\n+Debugging functions (see also 'undebug')\n+Zebra configuration\n+Debug zebra RIB\n+area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535> (hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535>\n OSPF area parameters\n OSPF area ID in IP address format\n OSPF area ID as a decimal value\n-Configure OSPF area as nssa\n-Do not inject inter-area routes into nssa\n-no ip rip authentication key-chain LINE\n+Configure a virtual link\n+Router ID of the remote ABR\n+Time between HELLO packets\n+Time between retransmitting lost link state advertisements\n+Link state transmit delay\n+Interval after which a neighbor is declared dead\n+Time between HELLO packets\n+Time between retransmitting lost link state advertisements\n+Link state transmit delay\n+Interval after which a neighbor is declared dead\n+no ip irdp address A.B.C.D preference <0-2147483647>\n Negate a command or set its defaults\n IP information\n-Routing Information Protocol\n-Authentication control\n-Authentication key-chain\n-name of key-chain\n-clear ip pim interfaces\n+Alter ICMP Router discovery preference this interface\n+Removes IRDP non-default preference\n+Select IRDP address\n+Old preference level\n+clear bgp <1-4294967295> soft\n+Reset functions\n+BGP information\n+Clear peers with the AS number\n+Soft reconfig inbound and outbound updates\n+clear ip bgp external soft in\n Reset functions\n IP information\n-PIM clear commands\n-Reset PIM interfaces\n-match peer local\n-Match values from routing table\n-Match peer address\n-Static or Redistributed routes\n-match as-path WORD\n-Match values from routing table\n-Match BGP AS path list\n-AS path access-list name\n-no debug pim zebra\n+BGP information\n+Clear all external peers\n+Soft reconfig inbound and outbound updates\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+clear ipv6 ospf6 interface [IFNAME]\n+Reset functions\n+IPv6 Information\n+Open Shortest Path First (OSPF) for IPv6\n+Interface information\n+Interface name(e.g. ep0)\n+clear bgp * in\n+Reset functions\n+BGP information\n+Clear all peers\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+show bgp view WORD ipv6 neighbors (A.B.C.D|X:X::X:X) flap-statistics\n+Show running system information\n+BGP information\n+BGP view\n+View name\n+Address family\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display the dampened routes received from neighbor\n+isis circuit-type (level-1|level-1-2|level-2-only)\n+IS-IS commands\n+Configure circuit type for interface\n+Level-1 only adjacencies are formed\n+Level-1-2 adjacencies are formed\n+Level-2 only adjacencies are formed\n+ipv6 ospf6 mtu-ignore\n+IPv6 Information\n+Open Shortest Path First (OSPF) for IPv6\n+Ignore MTU mismatch on this interface\n+no ip ospf authentication\n Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-PIM protocol activity\n-ZEBRA protocol activity\n-show bgp view WORD ipv4 summary\n+IP Information\n+OSPF interface commands\n+Enable authentication on this interface\n+clear bgp ipv6 (A.B.C.D|X:X::X:X) in prefix-filter\n+Reset functions\n+BGP information\n+Address family\n+BGP neighbor address to clear\n+BGP IPv6 neighbor to clear\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+Push out the existing ORF prefix-list\n+no match ipv6 address prefix-list WORD\n+Negate a command or set its defaults\n+Match values\n+IPv6 information\n+Match address of route\n+Match entries of prefix-lists\n+IPv6 prefix-list name\n+show bgp view WORD (ipv4|ipv6) (unicast|multicast) large-community (AA:BB:CC)\n Show running system information\n BGP information\n-IP information\n-Address Family modifier\n-Address Family modifier\n BGP view\n View name\n-Summary of BGP neighbor status\n-no debug ospf lsa\n+Address family\n+Address family\n+Address family modifier\n+Address family modifier\n+Display routes matching the large-communities\n+large-community number\n+no debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all)\n Negate a command or set its defaults\n Debugging functions (see also 'undebug')\n OSPF information\n-OSPF Link State Advertisement\n-isis priority <0-127>\n-IS-IS commands\n-Set priority for Designated Router election\n-Priority value\n-show bgp ipv6 (encap|vpn) rd ASN:nn_or_IP-address:nn X:X::X:X\n-ip large-community-list standard WORD (deny|permit) .AA:BB.CC\n+OSPF packets\n+OSPF Hello\n+OSPF Database Description\n+OSPF Link State Request\n+OSPF Link State Update\n+OSPF Link State Acknowledgment\n+OSPF all packets\n+show bgp ipv6 (encap|multicast|unicast|vpn) community (AA:NN|local-AS|no-advertise|no-export) exact-match\n+Show running system information\n+BGP information\n+Address family\n+Address family modifier\n+Address family modifier\n+Address family modifier\n+Address family modifier\n+Display routes matching the communities\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+Exact match of the communities\n+clear ip bgp <1-4294967295> ipv4 (unicast|multicast) out\n+Reset functions\n IP information\n-Add a large community list entry\n-Specify standard large-community-list\n-Large Community list name\n-Specify large community to reject\n-Specify large community to accept\n-large community in 'aa:bb:cc' format\n-no ipv6 nd mtu <1-65535>\n-Negate a command or set its defaults\n-Interface IPv6 config commands\n-Neighbor discovery\n-Advertised MTU\n-MTU in bytes\n-no ipv6 prefix-list WORD seq <1-4294967295> (deny|permit) X:X::X:X/M le <0-128>\n-Negate a command or set its defaults\n-IPv6 information\n-Build a prefix list\n-Name of a prefix list\n-sequence number of an entry\n-Sequence number\n-Specify packets to reject\n-Specify packets to forward\n-IPv6 prefix /, e.g., 3ffe::/16\n-Maximum prefix length to be matched\n-Maximum prefix length\n-ipv6 prefix-list WORD (deny|permit) X:X::X:X/M le <0-128>\n-IPv6 information\n-Build a prefix list\n-Name of a prefix list\n+BGP information\n+Clear peers with the AS number\n+Address family\n+Address Family modifier\n+Address Family modifier\n+Resend all outbound updates\n+access-list (<100-199>|<2000-2699>) (deny|permit) ip A.B.C.D A.B.C.D any\n+Add an access list entry\n+IP extended access list\n+IP extended access list (expanded range)\n Specify packets to reject\n Specify packets to forward\n-IPv6 prefix /, e.g., 3ffe::/16\n-Maximum prefix length to be matched\n-Maximum prefix length\n-no default-metric <1-16>\n-Negate a command or set its defaults\n-Set a metric of redistribute routes\n-Default metric\n-no ip community-list <100-500>\n-Negate a command or set its defaults\n+Any Internet Protocol\n+Source address\n+Source wildcard bits\n+Any destination host\n+show bgp ipv6 (encap|multicast|unicast|vpn) dampening flap-statistics\n+Show running system information\n+BGP information\n+Address Family\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n+Display detailed information about dampening\n+Display flap statistics of routes\n+show bgp ipv6 regexp .LINE\n+Show running system information\n+BGP information\n+Address family\n+Display routes matching the AS path regular expression\n+A regular-expression to match the BGP AS paths\n+clear ip bgp * vpnv4 unicast soft\n+Reset functions\n IP information\n-Add a community list entry\n-Community list number (expanded)\n-no ipv6 bgp aggregate-address X:X::X:X/M\n-Negate a command or set its defaults\n-IPv6 information\n BGP information\n-Configure BGP aggregate entries\n-Aggregate prefix\n-no ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) (reject|blackhole) vrf <0-65535>\n-Negate a command or set its defaults\n+Clear all peers\n+Address family\n+Address Family Modifier\n+Soft reconfig inbound and outbound updates\n+ipv6 route X:X::X:X/M X:X::X:X INTERFACE (reject|blackhole) tag <1-4294967295>vrf <0-65535>\n IP information\n Establish static routes\n IPv6 destination prefix (e.g. 3ffe:506::/32)\n IPv6 gateway address\n IPv6 gateway interface name\n Emit an ICMP unreachable when matched\n Silently discard pkts when matched\n+Set tag for this route\n+Tag value\n Specify the VRF\n The VRF ID\n-neighbor (A.B.C.D|X:X::X:X) strict-capability-match\n-Specify neighbor router\n-Neighbor address\n-IPv6 address\n-Strict capability negotiation match\n-undebug pim packets\n+network A.B.C.D mask A.B.C.D\n+Specify a network to announce via BGP\n+Network number\n+Network mask\n+Network mask\n+show ip ospf neighbor IFNAME\n+Show running system information\n+IP information\n+OSPF information\n+Neighbor list\n+Interface name\n+no bgp confederation peers .<1-4294967295>\n+Negate a command or set its defaults\n+BGP specific commands\n+AS confederation parameters\n+Peer ASs in BGP confederation\n+AS number\n+no vrf <1-65535> netns NAME\n+Negate a command or set its defaults\n+Enable a VRF\n+Specify the VRF identifier\n+Associate with a NETNS\n+The file name in /var/run/netns, or a full pathname\n+no maximum-paths ibgp <1-1>\n+Negate a command or set its defaults\n+Forward packets over multiple paths\n+iBGP-multipath\n+Number of paths\n+undebug pim packet-dump send\n Disable debugging functions (see also 'debug')\n PIM protocol activity\n-PIM protocol packets\n-neighbor (A.B.C.D|X:X::X:X|WORD) prefix-list WORD (in|out)\n-Specify neighbor router\n+PIM packet dump\n+Dump sent packets\n+aggregate-address A.B.C.D A.B.C.D as-set\n+Configure BGP aggregate entries\n+Aggregate address\n+Aggregate mask\n+Generate AS set path information\n+set as-path prepend (last-as) <1-10>\n+Set values in destination routing protocol\n+Transform BGP AS_PATH attribute\n+Prepend to the as-path\n+Use the peer's AS-number\n+Number of times to insert\n+show bgp view WORD ipv4 (unicast|multicast) rsclient (A.B.C.D|X:X::X:X) A.B.C.D/M\n+Show running system information\n+BGP information\n+BGP view\n+View name\n+Address family\n+Address Family modifier\n+Address Family modifier\n+Information about Route Server Client\n Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Filter updates to/from this neighbor\n-Name of a prefix list\n-Filter incoming updates\n-Filter outgoing updates\n-no set ipv6 next-hop global\n+IPv6 address\n+IP prefix /, e.g., 35.0.0.0/8\n+no debug static\n Negate a command or set its defaults\n-Set values in destination routing protocol\n-IPv6 information\n-IPv6 next-hop address\n-IPv6 global address\n-area (A.B.C.D|<0-4294967295>) authentication message-digest\n+Debugging functions (see also 'undebug')\n+PIM Static Multicast Route activity\n+area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (authentication|)\n OSPF area parameters\n OSPF area ID in IP address format\n OSPF area ID as a decimal value\n-Enable authentication\n-Use message-digest authentication\n-ipv6 nd prefix X:X::X:X/M (<0-4294967295>|infinite) (<0-4294967295>|infinite) (off-link|) (no-autoconfig|) (router-address|)\n-Interface IPv6 config commands\n-Neighbor discovery\n-Prefix information\n-IPv6 prefix\n-Valid lifetime in seconds\n-Infinite valid lifetime\n-Preferred lifetime in seconds\n-Infinite preferred lifetime\n-Do not use prefix for onlink determination\n-Do not use prefix for autoconfiguration\n-Set Router Address flag\n-no ip rip authentication string LINE\n-Negate a command or set its defaults\n-IP information\n-Routing Information Protocol\n-Authentication control\n-Authentication string\n-Authentication string\n-clear bgp * in prefix-filter\n-Reset functions\n+Configure a virtual link\n+Router ID of the remote ABR\n+Enable authentication on this virtual link\n+dummy string \n+show bgp ipv6 (unicast|multicast) X:X::X:X (bestpath|multipath)\n+Show running system information\n BGP information\n-Clear all peers\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-Push out prefix-list ORF and do inbound soft reconfig\n-area (A.B.C.D|<0-4294967295>) export-list NAME\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Set the filter for networks announced to other areas\n-Name of the access-list\n-show bgp ipv4 vpn neighbors (A.B.C.D|X:X::X:X) routes\n+Address family\n+Address Family modifier\n+Address Family modifier\n+Network in the BGP routing table to display\n+Display only the bestpath\n+Display only multipaths\n+ipv6 route X:X::X:X/M X:X::X:X INTERFACE (reject|blackhole) <1-255>\n+IP information\n+Establish static routes\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Distance value for this prefix\n+no max-metric router-lsa on-shutdown\n+Negate a command or set its defaults\n+OSPF maximum / infinite-distance metric\n+Advertise own Router-LSA with infinite distance (stub router)\n+Advertise stub-router prior to full shutdown of OSPF\n+ipv6 ospf6 priority <0-255>\n+IPv6 Information\n+Open Shortest Path First (OSPF) for IPv6\n+Router priority\n+Priority value\n+no debug ospf event\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+OSPF information\n+OSPF event information\n+show bgp community-list (<1-500>|WORD) exact-match\n Show running system information\n BGP information\n-Address Family\n-Display VPN NLRI specific information\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display routes learned from neighbor\n-ipv6 nd other-config-flag\n-Interface IPv6 config commands\n-Neighbor discovery\n-Other statefull configuration flag\n-no neighbor (A.B.C.D|X:X::X:X) peer-group WORD\n+Display routes matching the community-list\n+community-list number\n+community-list name\n+Exact match of the communities\n+no neighbor (A.B.C.D|X:X::X:X|WORD) capability dynamic\n Negate a command or set its defaults\n Specify neighbor router\n Neighbor address\n-IPv6 address\n-Member of the peer-group\n-peer-group name\n-no neighbor (A.B.C.D|X:X::X:X|WORD) route-server-client\n+Neighbor IPv6 address\n+Neighbor tag\n+Advertise capability to the peer\n+Advertise dynamic capability to this neighbor\n+show debugging nhrp\n+Show running system information\n+Debugging information\n+NHRP configuration\n+neighbor A.B.C.D priority <0-255>\n+Specify neighbor router\n+Neighbor IP address\n+Neighbor Priority\n+no ipv6 prefix-list sequence-number\n+Negate a command or set its defaults\n+IPv6 information\n+Build a prefix list\n+Include/exclude sequence numbers in NVGEN\n+no neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged\n Negate a command or set its defaults\n Specify neighbor router\n Neighbor address\n Neighbor IPv6 address\n Neighbor tag\n-Configure a neighbor as Route Server client\n-clear ip bgp * out\n+BGP attribute is propagated unchanged to this neighbor\n+no debug isis checksum-errors\n+Disable debugging functions (see also 'debug')\n+IS-IS information\n+IS-IS LSP checksum errors\n+show route-map [WORD]\n+Show running system information\n+route-map information\n+route-map name\n+clear ip bgp view WORD * soft out\n Reset functions\n IP information\n BGP information\n+BGP view\n+view name\n Clear all peers\n+Soft reconfig inbound and outbound updates\n Resend all outbound updates\n-show bgp ipv6 (encap|multicast|unicast|vpn) community (AA:NN|local-AS|no-advertise|no-export) exact-match\n-Show running system information\n-BGP information\n-Address family\n-Address family modifier\n-Address family modifier\n-Address family modifier\n-Address family modifier\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-Exact match of the communities\n-area A.B.C.D filter-list prefix WORD (in|out)\n-OSPFv6 area parameters\n-OSPFv6 area ID in IP address format\n-Filter networks between OSPFv6 areas\n-Filter prefixes between OSPFv6 areas\n-Name of an IPv6 prefix-list\n-Filter networks sent to this area\n-Filter networks sent from this area\n-show ip pim join\n-Show running system information\n+no set tag\n+Negate a command or set its defaults\n+Set values in destination routing protocol\n+Tag value for routing protocol\n+debug igmp\n+Debugging functions (see also 'undebug')\n+IGMP protocol activity\n+no bgp route-reflector allow-outbound-policy\n+Negate a command or set its defaults\n+BGP specific commands\n+Allow modifications made by out route-map\n+on ibgp neighbors\n+neighbor (A.B.C.D|X:X::X:X|WORD) route-server-client\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Configure a neighbor as Route Server client\n+no ip prefix-list WORD\n+Negate a command or set its defaults\n IP information\n-PIM information\n-PIM interface join information\n-show ip bgp view WORD neighbors (A.B.C.D|X:X::X:X)\n-Show running system information\n+Build a prefix list\n+Name of a prefix list\n+ip extcommunity-list standard WORD (deny|permit)\n IP information\n+Add a extended community list entry\n+Specify standard extcommunity-list\n+Extended Community list name\n+Specify community to reject\n+Specify community to accept\n+no ipv6 prefix-list WORD (deny|permit) X:X::X:X/M le <0-128>\n+Negate a command or set its defaults\n+IPv6 information\n+Build a prefix list\n+Name of a prefix list\n+Specify packets to reject\n+Specify packets to forward\n+IPv6 prefix /, e.g., 3ffe::/16\n+Maximum prefix length to be matched\n+Maximum prefix length\n+no redistribute (kernel|connected|static|rip|ospf|isis|pim|babel|nhrp) metric <0-4294967295>\n+Negate a command or set its defaults\n+Redistribute information from another routing protocol\n+Kernel routes (not installed via the zebra RIB)\n+Connected routes (directly attached subnet or host)\n+Statically configured routes\n+Routing Information Protocol (RIP)\n+Open Shortest Path First (OSPFv2)\n+Intermediate System to Intermediate System (IS-IS)\n+Protocol Independent Multicast (PIM)\n+Babel routing protocol (Babel)\n+Next Hop Resolution Protocol (NHRP)\n+Metric for redistributed routes\n+Default metric\n+show bgp ipv6 large-community-list (<1-500>|WORD)\n+Show running system information\n BGP information\n-BGP view\n-View name\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-clear bgp ipv6 <1-4294967295> in\n+Address family\n+Display routes matching the large-community-list\n+large-community-list number\n+large-community-list name\n+clear ip bgp *\n Reset functions\n+IP information\n BGP information\n-Address family\n-Clear peers with the AS number\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-match interface WORD\n-Match values from routing table\n-match first hop interface of route\n-Interface name\n-no neighbor A.B.C.D\n+Clear all peers\n+debug ospf6 neighbor\n+Debugging functions (see also 'undebug')\n+Open Shortest Path First (OSPF) for IPv6\n+Debug OSPFv3 Neighbor\n+no ip prefix-list sequence-number\n Negate a command or set its defaults\n-Specify neighbor router\n-Neighbor IP address\n-no isis hello-interval <1-600> level-1\n+IP information\n+Build a prefix list\n+Include/exclude sequence numbers in NVGEN\n+show ipv6 route X:X::X:X/M\n+Show running system information\n+IP information\n+IPv6 routing table\n+IPv6 prefix\n+no use-bw\n Negate a command or set its defaults\n-IS-IS commands\n-Set Hello interval\n-Hello interval value\n-Holdtime 1 second, interval depends on multiplier\n-Specify hello-interval for level-1 IIHs\n-show ip bgp ipv4 (unicast|multicast) cidr-only\n+Disable Unidirectional Utilised Bandwidth on this interface\n+show ip bgp paths\n Show running system information\n IP information\n BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Display only routes with non-natural netmasks\n-clear ip bgp * vpnv4 unicast soft out\n+Path information\n+clear ip ospf interface [IFNAME]\n Reset functions\n IP information\n+OSPF information\n+Interface information\n+Interface name\n+show bgp ipv6 X:X::X:X (bestpath|multipath)\n+Show running system information\n BGP information\n-Clear all peers\n Address family\n-Address Family Modifier\n-Soft reconfig inbound and outbound updates\n-Resend all outbound updates\n-clear bgp ipv6 <1-4294967295> soft\n+Network in the BGP routing table to display\n+Display only the bestpath\n+Display only multipaths\n+neighbor (A.B.C.D|X:X::X:X|WORD) maximum-prefix <1-4294967295>\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Maximum number of prefix accept from this peer\n+maximum no. of prefix limit\n+area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (authentication|) (message-digest|null) (authentication-key|) AUTH_KEY\n+OSPF area parameters\n+OSPF area ID in IP address format\n+OSPF area ID as a decimal value\n+Configure a virtual link\n+Router ID of the remote ABR\n+Enable authentication on this virtual link\n+dummy string \n+Use null authentication\n+Use message-digest authentication\n+Authentication password (key)\n+The OSPF password (key)\n+clear bgp ipv6 external WORD in\n Reset functions\n BGP information\n Address family\n-Clear peers with the AS number\n-Soft reconfig inbound and outbound updates\n-show ipv6 mbgp community (AA:NN|local-AS|no-advertise|no-export) exact-match\n+Clear all external peers\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+show ip pim local-membership\n+Show running system information\n+IP information\n+PIM information\n+PIM interface local-membership\n+show bgp ipv6 rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M\n+Show running system information\n+BGP information\n+Information about Route Server Client\n+Neighbor address\n+IPv6 address\n+IPv6 prefix /, e.g., 3ffe::/16\n+show ipv6 bgp large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n Show running system information\n IPv6 information\n-MBGP information\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-Exact match of the communities\n-no match origin\n-Negate a command or set its defaults\n-Match values from routing table\n-BGP origin code\n-no match as-path\n+BGP information\n+Display routes matching the large-communities\n+large-community number\n+large-community number\n+large-community number\n+large-community number\n+no ospf abr-type (cisco|ibm|shortcut|standard)\n Negate a command or set its defaults\n-Match values from routing table\n-Match BGP AS path list\n-no ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE|null0) <1-255>\n+OSPF specific commands\n+Set OSPF ABR type\n+Alternative ABR, cisco implementation\n+Alternative ABR, IBM implementation\n+Shortcut ABR\n+no ipv6 nd ra-lifetime\n Negate a command or set its defaults\n-IP information\n-Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n-IP gateway address\n-IP gateway interface name\n-Null interface\n-Distance value for this route\n-clear bgp ipv6 * out\n-Reset functions\n-BGP information\n-Address family\n-Clear all peers\n-Resend all outbound updates\n-show ip bgp ipv4 (unicast|multicast) large-community\n+Interface IPv6 config commands\n+Neighbor discovery\n+Router lifetime\n+debug rip packet\n+Debugging functions (see also 'undebug')\n+RIP information\n+RIP packet\n+show ip bgp ipv4 (unicast|multicast) prefix-list WORD\n Show running system information\n IP information\n BGP information\n Address family\n Address Family modifier\n Address Family modifier\n-Display routes matching the large-communities\n-show ipv6 ospf6 database adv-router A.B.C.D (detail|dump|internal)\n-Show running system information\n-IPv6 information\n-Open Shortest Path First (OSPF) for IPv6\n-Display Link state database\n-Search by Advertising Router\n-Specify Advertising Router as IPv4 address notation\n-Display details of LSAs\n-Dump LSAs\n-Display LSA's internal information\n-no neighbor (A.B.C.D|X:X::X:X|WORD) passive\n-Negate a command or set its defaults\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Don't send open messages to this neighbor\n-show bgp view WORD neighbors (A.B.C.D|X:X::X:X) routes\n+Display routes conforming to the prefix-list\n+IP prefix-list name\n+show ip bgp community-info\n Show running system information\n-BGP information\n-BGP view\n-View name\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display routes learned from neighbor\n-ip rip split-horizon\n IP information\n-Routing Information Protocol\n-Perform split horizon\n-show bgp view WORD neighbors (A.B.C.D|X:X::X:X)\n+BGP information\n+List all bgp community information\n+ipv6 nd prefix X:X::X:X/M (<0-4294967295>|infinite) (<0-4294967295>|infinite) (no-autoconfig|)\n+Interface IPv6 config commands\n+Neighbor discovery\n+Prefix information\n+IPv6 prefix\n+Valid lifetime in seconds\n+Infinite valid lifetime\n+Preferred lifetime in seconds\n+Infinite preferred lifetime\n+Do not use prefix for autoconfiguration\n+show ip bgp view WORD neighbors (A.B.C.D|X:X::X:X)\n Show running system information\n+IP information\n BGP information\n BGP view\n View name\n Detailed information on TCP and BGP neighbor connections\n Neighbor to display information about\n Neighbor to display information about\n-show bgp ipv6 (encap|multicast|unicast|vpn) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n+no distance ospf6\n+Negate a command or set its defaults\n+Define an administrative distance\n+OSPF6 Administrative distance\n+OSPF6 Distance\n+show ip bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n Show running system information\n+IP information\n BGP information\n-Address family\n-Address family modifier\n-Address family modifier\n-Address family modifier\n-Address family modifier\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n@@ -1755,1011 +1854,780 @@\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-Exact match of the communities\n-default-information originate\n-Control distribution of default route\n-Distribute a default route\n-no neighbor (A.B.C.D|X:X::X:X|WORD) override-capability\n-Negate a command or set its defaults\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Override capability negotiation result\n-ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) (reject|blackhole) <1-255>\n-IP information\n-Establish static routes\n-IPv6 destination prefix (e.g. 3ffe:506::/32)\n-IPv6 gateway address\n-IPv6 gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Distance value for this prefix\n-debug ospf lsa\n-Debugging functions (see also 'undebug')\n-OSPF information\n-OSPF Link State Advertisement\n-no ip large-community-list expanded WORD\n+ip ospf message-digest-key <1-255> md5 KEY\n+IP Information\n+OSPF interface commands\n+Message digest authentication password (key)\n+Use MD5 algorithm\n+The OSPF password (key)\n+ipv6 nd managed-config-flag\n+Interface IPv6 config commands\n+Neighbor discovery\n+Managed address configuration flag\n+no area (A.B.C.D|<0-4294967295>) range A.B.C.D/M substitute A.B.C.D/M\n Negate a command or set its defaults\n+OSPF area parameters\n+OSPF area ID in IP address format\n+OSPF area ID as a decimal value\n+Summarize routes matching address/mask (border routers only)\n+Area range prefix\n+Announce area range as another prefix\n+Network prefix to be announced instead of range\n+res-bw BANDWIDTH\n+Unidirectional Residual Bandwidth\n+Bytes/second (IEEE floating point format)\n+show bgp ipv4 vpn A.B.C.D/M\n+Show running system information\n+BGP information\n IP information\n-Add a large community list entry\n-Specify expanded large-community-list\n-Large Community list name\n-aggregate-address A.B.C.D A.B.C.D\n-Configure BGP aggregate entries\n-Aggregate address\n-Aggregate mask\n-bgp confederation peers .<1-4294967295>\n-BGP specific commands\n-AS confederation parameters\n-Peer ASs in BGP confederation\n-AS number\n-match extcommunity (<1-99>|<100-500>|WORD)\n-Match values from routing table\n-Match BGP/VPN extended community list\n-Extended community-list number (standard)\n-Extended community-list number (expanded)\n-Extended community-list name\n-network A.B.C.D/M backdoor\n-Specify a network to announce via BGP\n+Display VPN NLRI specific information\n IP prefix /, e.g., 35.0.0.0/8\n-Specify a BGP backdoor route\n-access-list (<1-99>|<1300-1999>) (deny|permit) A.B.C.D A.B.C.D\n+no ipv6 nd suppress-ra\n+Negate a command or set its defaults\n+Interface IPv6 config commands\n+Neighbor discovery\n+Suppress Router Advertisement\n+access-list (<100-199>|<2000-2699>) (deny|permit) ip any A.B.C.D A.B.C.D\n Add an access list entry\n-IP standard access list\n-IP standard access list (expanded range)\n+IP extended access list\n+IP extended access list (expanded range)\n Specify packets to reject\n Specify packets to forward\n-Address to match\n-Wildcard bits\n-show bgp ipv6 (encap|multicast|unicast|vpn) dampening flap-statistics X:X::X:X/M longer-prefixes\n-Show running system information\n-BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Display detailed information about dampening\n-Display flap statistics of routes\n-IP prefix /, e.g., 35.0.0.0/8\n-Display route and more specific routes\n-clear ip pim oil\n-Reset functions\n-IP information\n-PIM clear commands\n-Rescan PIM OIL (output interface list)\n-no neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged med next-hop as-path\n+Any Internet Protocol\n+Any source host\n+Destination address\n+Destination Wildcard bits\n+isis priority <0-127> level-2\n+IS-IS commands\n+Set priority for Designated Router election\n+Priority value\n+Specify priority for level-2 routing\n+no isis metric <0-16777215> level-1\n Negate a command or set its defaults\n+IS-IS commands\n+Set default metric for circuit\n+Default metric value\n+Specify metric for level-1 routing\n+neighbor (A.B.C.D|X:X::X:X|WORD) password LINE\n Specify neighbor router\n Neighbor address\n Neighbor IPv6 address\n Neighbor tag\n-BGP attribute is propagated unchanged to this neighbor\n-Med attribute\n-Nexthop attribute\n-As-path attribute\n-debug zebra fpm\n-Debugging functions (see also 'undebug')\n-Zebra configuration\n-Debug zebra FPM events\n-show bgp ipv4 vpn summary\n+Set a password\n+The password\n+no access-list WORD (deny|permit) A.B.C.D/M\n+Negate a command or set its defaults\n+Add an access list entry\n+IP zebra access-list name\n+Specify packets to reject\n+Specify packets to forward\n+Prefix to match. e.g. 10.0.0.0/8\n+show bgp ipv6 (encap|multicast|unicast|vpn) large-community-list (<1-500>|WORD)\n Show running system information\n BGP information\n-Display VPN NLRI specific information\n-Summary of BGP neighbor status\n-no debug ospf ism\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-OSPF information\n-OSPF Interface State Machine\n-no ip route A.B.C.D A.B.C.D (reject|blackhole) <1-255>\n+Address family\n+Address family modifier\n+Address family modifier\n+Address family modifier\n+Address family modifier\n+Display routes matching the large-community-list\n+large-community-list number\n+large-community-list name\n+no isis metric level-2\n Negate a command or set its defaults\n-IP information\n-Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Distance value for this route\n-show bgp ipv4 vpn rd ASN:nn_or_IP-address:nn A.B.C.D\n+IS-IS commands\n+Set default metric for circuit\n+Specify metric for level-2 routing\n+show bgp large-community-list (<1-500>|WORD)\n Show running system information\n BGP information\n-IP information\n-Display VPN NLRI specific information\n-Display information for a route distinguisher\n-VPN Route Distinguisher\n-Network in the BGP routing table to display\n-accept-lifetime HH:MM:SS MONTH <1-31> <1993-2035> duration <1-2147483646>\n-Set accept lifetime of the key\n-Time to start\n-Month of the year to start\n-Day of th month to start\n-Year to start\n-Duration of the key\n-Duration seconds\n-no route-map WORD\n+Display routes matching the large-community-list\n+large-community-list number\n+large-community-list name\n+no ip ospf area [A.B.C.D]\n Negate a command or set its defaults\n-Create route-map or enter route-map command mode\n-Route map tag\n-show bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n+IP Information\n+OSPF interface commands\n+Disable OSPF on this interface\n+Address of interface\n+network A.B.C.D\n+Specify a network to announce via BGP\n+Network number\n+area (A.B.C.D|<0-4294967295>) nssa\n+OSPF area parameters\n+OSPF area ID in IP address format\n+OSPF area ID as a decimal value\n+Configure OSPF area as nssa\n+log-adjacency-changes detail\n+Log changes in adjacency state\n+Log all state changes\n+show ip bgp community (AA:NN|local-AS|no-advertise|no-export) exact-match\n Show running system information\n+IP information\n BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n Exact match of the communities\n-IP information\n-Enable IGMP operation\n-show bgp ipv6 neighbors (A.B.C.D|X:X::X:X) received prefix-filter\n+Activate link parameters on this interface\n+show bgp ipv4 (multicast|unicast) neighbors (A.B.C.D|X:X::X:X) routes\n Show running system information\n BGP information\n Address family\n+Address Family modifier\n+Address Family modifier\n Detailed information on TCP and BGP neighbor connections\n Neighbor to display information about\n Neighbor to display information about\n-Display information received from a BGP neighbor\n-Display the prefixlist filter\n-no lsp-refresh-interval\n-Negate a command or set its defaults\n-LSP refresh interval in seconds\n-match large-community (<1-99>|<100-500>|WORD)\n-Match values from routing table\n-Match BGP large community list\n-Large Community-list number (standard)\n-Large Community-list number (expanded)\n-Large Community-list name\n-no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (authentication|) (authentication-key|)\n-Negate a command or set its defaults\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Configure a virtual link\n-Router ID of the remote ABR\n-Enable authentication on this virtual link\n-dummy string \n-Authentication password (key)\n-The OSPF password (key)\n-show bgp ipv6 encap neighbors A.B.C.D routes\n-Show running system information\n-BGP information\n-Address Family\n-Display ENCAP NLRI specific information\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n Display routes learned from neighbor\n-no offset-list WORD (in|out) <0-16>\n-Negate a command or set its defaults\n-Modify RIPng metric\n-Access-list name\n-For incoming updates\n-For outgoing updates\n-Metric value\n-neighbor (A.B.C.D|X:X::X:X|WORD) ebgp-multihop\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Allow EBGP neighbors not on directly connected networks\n-no (ip|ipv6) nhrp map (A.B.C.D|X:X::X:X)\n-Negate a command or set its defaults\n-IP information\n-IPv6 information\n-Next Hop Resolution Protocol functions\n-Nexthop Server configuration\n-IPv4 protocol address\n-IPv6 protocol address\n-bgp bestpath med missing-as-worst confed\n-BGP specific commands\n-Change the default bestpath selection\n-MED attribute\n-Treat missing MED as the least preferred one\n-Compare MED among confederation paths\n-no set metric-type (type-1|type-2)\n-Negate a command or set its defaults\n-Set value\n-Type of metric\n-OSPF6 external type 1 metric\n-OSPF6 external type 2 metric\n-no auto-cost reference-bandwidth\n+no debug isis local-updates\n+Disable debugging functions (see also 'debug')\n+IS-IS information\n+IS-IS local update packets\n+no ip ospf cost\n Negate a command or set its defaults\n-Calculate OSPF interface cost according to bandwidth\n-Use reference bandwidth method to assign OSPF cost\n-show ip forwarding\n+IP Information\n+OSPF interface commands\n+Interface cost\n+debug isis spf-triggers\n+Debugging functions (see also 'undebug')\n+IS-IS information\n+IS-IS SPF triggering events\n+show ip bgp large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n Show running system information\n IP information\n-IP forwarding status\n-show ip pim assert-winner-metric\n+BGP information\n+Display routes matching the large-communities\n+large-community number\n+large-community number\n+large-community number\n+large-community number\n+show ip bgp neighbors (A.B.C.D|X:X::X:X) received prefix-filter\n Show running system information\n IP information\n-PIM information\n-PIM interface assert winner metric\n-no set originator-id\n-Negate a command or set its defaults\n-Set values in destination routing protocol\n-BGP originator ID attribute\n-no (ip|ipv6) router isis WORD\n-Negate a command or set its defaults\n-Interface Internet Protocol config commands\n-IP router interface commands\n-IS-IS Routing for IP\n-Routing process tag\n-send-lifetime HH:MM:SS <1-31> MONTH <1993-2035> HH:MM:SS MONTH <1-31> <1993-2035>\n-Set send lifetime of the key\n-Time to start\n-Day of th month to start\n-Month of the year to start\n-Year to start\n-Time to expire\n-Month of the year to expire\n-Day of th month to expire\n-Year to expire\n-no timers basic\n+BGP information\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display information received from a BGP neighbor\n+Display the prefixlist filter\n+no debug bgp updates\n Negate a command or set its defaults\n-Adjust routing timers\n-Basic routing protocol update timers\n-no aggregate-address A.B.C.D A.B.C.D summary-only\n+Debugging functions (see also 'undebug')\n+BGP information\n+BGP updates\n+no isis csnp-interval level-2\n Negate a command or set its defaults\n-Configure BGP aggregate entries\n-Aggregate address\n-Aggregate mask\n-Filter more specific routes from updates\n-no synchronization\n+IS-IS commands\n+Set CSNP interval in seconds\n+Specify interval for level-2 CSNPs\n+no area (A.B.C.D|<0-4294967295>) authentication\n Negate a command or set its defaults\n-Perform IGP synchronization\n-show ip bgp rsclient (A.B.C.D|X:X::X:X) A.B.C.D/M\n-Show running system information\n-IP information\n-BGP information\n-Information about Route Server Client\n-Neighbor address\n-IPv6 address\n-IP prefix /, e.g., 35.0.0.0/8\n-area (A.B.C.D|<0-4294967295>) nssa (translate-candidate|translate-never|translate-always)\n OSPF area parameters\n OSPF area ID in IP address format\n OSPF area ID as a decimal value\n-Configure OSPF area as nssa\n-Configure NSSA-ABR for translate election (default)\n-Configure NSSA-ABR to never translate\n-Configure NSSA-ABR to always translate\n-show ip bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n+Enable authentication\n+show bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n Show running system information\n-IP information\n BGP information\n+Address family\n+Address Family modifier\n+Address Family modifier\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-Exact match of the communities\n-no lsp-mtu\n-Negate a command or set its defaults\n-Configure the maximum size of generated LSPs\n-ip prefix-list WORD seq <1-4294967295> (deny|permit) A.B.C.D/M ge <0-32> le <0-32>\n-IP information\n-Build a prefix list\n-Name of a prefix list\n-sequence number of an entry\n-Sequence number\n-Specify packets to reject\n-Specify packets to forward\n-IP prefix /, e.g., 35.0.0.0/8\n-Minimum prefix length to be matched\n-Minimum prefix length\n-Maximum prefix length to be matched\n-Maximum prefix length\n-no redistribute ospf6\n-Negate a command or set its defaults\n-Redistribute control\n-OSPF6 route\n-show bgp ipv6 (encap|multicast|unicast|vpn) flap-statistics\n-no debug zebra rib queue\n+no debug ospf ism (status|events|timers)\n Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-Zebra configuration\n-Debug zebra RIB\n-Debug RIB queueing\n-show ipv6 bgp summary\n-Show running system information\n-IPv6 information\n-BGP information\n-Summary of BGP neighbor status\n-no aggregate-address X:X::X:X/M summary-only\n+Debugging functions\n+OSPF information\n+OSPF Interface State Machine\n+ISM Status Information\n+ISM Event Information\n+ISM Timer Information\n+no lsp-refresh-interval level-2 <1-65235>\n Negate a command or set its defaults\n-Configure BGP aggregate entries\n-Aggregate prefix\n-Filter more specific routes from updates\n-ip route A.B.C.D/M (reject|blackhole) <1-255> vrf <0-65535>\n+LSP refresh interval for Level 2 only\n+LSP refresh interval for Level 2 only in seconds\n+ip route A.B.C.D/M (reject|blackhole) tag <1-4294967295> <1-255>\n IP information\n Establish static routes\n IP destination prefix (e.g. 10.0.0.0/8)\n Emit an ICMP unreachable when matched\n Silently discard pkts when matched\n+Set tag for this route\n+Tag value\n Distance value for this route\n-Specify the VRF\n-The VRF ID\n-delay <0-16777215>\n-Unidirectional Average Link Delay\n-Average delay in micro-second as decimal (0...16777215)\n-no set large-community .AA:BB:CC\n-Negate a command or set its defaults\n-Set values in destination routing protocol\n-BGP large community attribute\n-Large community in .AA:BB:CC format or additive\n-max-metric router-lsa on-shutdown <5-86400>\n-OSPF maximum / infinite-distance metric\n-Advertise own Router-LSA with infinite distance (stub router)\n-Advertise stub-router prior to full shutdown of OSPF\n-Time (seconds) to wait till full shutdown\n-no ipv6 nd ra-lifetime <0-9000>\n-Negate a command or set its defaults\n-Interface IPv6 config commands\n-Neighbor discovery\n-Router lifetime\n-Router lifetime in seconds (0 stands for a non-default gw)\n-show ipv6 ospf6 interface IFNAME prefix\n-Show running system information\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Interface information\n-Interface name(e.g. ep0)\n-Display connected prefixes to advertise\n-no ip rip authentication key-chain\n-Negate a command or set its defaults\n-IP information\n-Routing Information Protocol\n-Authentication control\n-Authentication key-chain\n ip irdp minadvertinterval <3-1800>\n IP information\n ICMP Router discovery on this interface\n Set minimum time between advertisement\n Minimum advertisement interval in seconds\n-ip igmp query-max-response-time <1-25>\n+neighbor (A.B.C.D|X:X::X:X|WORD) maximum-prefix <1-4294967295> restart <1-65535>\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Maximum number of prefix accept from this peer\n+maximum no. of prefix limit\n+Restart bgp connection after limit is exceeded\n+Restart interval in minutes\n+show bgp ipv6 neighbors (A.B.C.D|X:X::X:X) advertised-routes\n+Show running system information\n+BGP information\n+Address family\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display the routes advertised to a BGP neighbor\n+ip community-list standard WORD (deny|permit)\n IP information\n-Enable IGMP operation\n-IGMP max query response value (seconds)\n-Query response value in seconds\n-network A.B.C.D/M rd ASN:nn_or_IP-address:nn tag WORD route-map WORD\n+Add a community list entry\n+Add a standard community-list entry\n+Community list name\n+Specify community to reject\n+Specify community to accept\n+clear bgp peer-group WORD soft\n+Reset functions\n+BGP information\n+Clear all members of peer-group\n+BGP peer-group name\n+Soft reconfig inbound and outbound updates\n+no debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) (detail|)\n+Negate a command or set its defaults\n+Debugging functions\n+OSPF information\n+OSPF packets\n+OSPF Hello\n+OSPF Database Description\n+OSPF Link State Request\n+OSPF Link State Update\n+OSPF Link State Acknowledgment\n+OSPF all packets\n+Packet sent\n+Packet received\n+Detail Information\n+show bgp ipv6 route-map WORD\n+Show running system information\n+BGP information\n+Address family\n+Display routes matching the route-map\n+A route-map to match on\n+no area (A.B.C.D|<0-4294967295>) stub\n+Negate a command or set its defaults\n+OSPF area parameters\n+OSPF area ID in IP address format\n+OSPF area ID as a decimal value\n+Configure OSPF area as stub\n+show bgp view WORD (ipv4) (vpnv4) statistics\n+Show running system information\n+BGP information\n+BGP view\n+Address family\n+Address Family modifier\n+BGP RIB advertisement statistics\n+network A.B.C.D/M rd ASN:nn_or_IP-address:nn tag WORD\n Specify a network to announce via BGP\n IP prefix /, e.g., 35.0.0.0/8\n Specify Route Distinguisher\n VPN Route Distinguisher\n tag value\n-route map\n-route map name\n-clear ip bgp A.B.C.D out\n+Administrative distance\n+Distance value\n+clear ip bgp A.B.C.D vpnv4 unicast soft out\n Reset functions\n IP information\n BGP information\n BGP neighbor address to clear\n+Address family\n+Address Family Modifier\n+Soft reconfig inbound and outbound updates\n Resend all outbound updates\n-no ip ospf retransmit-interval A.B.C.D\n+no ipv6 prefix-list WORD seq <1-4294967295> (deny|permit) X:X::X:X/M le <0-128> ge <0-128>\n Negate a command or set its defaults\n-IP Information\n-OSPF interface commands\n-Time between retransmitting lost link state advertisements\n-Address of interface\n-neighbor (A.B.C.D|X:X::X:X|WORD) remote-as <1-4294967295>\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Specify a BGP neighbor\n-AS number\n-no redistribute (kernel|connected|static|ripng|isis|bgp|babel|nhrp) route-map WORD\n+IPv6 information\n+Build a prefix list\n+Name of a prefix list\n+sequence number of an entry\n+Sequence number\n+Specify packets to reject\n+Specify packets to forward\n+IPv6 prefix /, e.g., 3ffe::/16\n+Maximum prefix length to be matched\n+Maximum prefix length\n+Minimum prefix length to be matched\n+Minimum prefix length\n+distance ospf6 external <1-255>\n+Define an administrative distance\n+OSPF6 Administrative distance\n+External routes\n+Distance for external routes\n+no redistribute (kernel|connected|static|ospf6|isis|bgp|babel|nhrp) route-map WORD\n Negate a command or set its defaults\n Redistribute\n Kernel routes (not installed via the zebra RIB)\n Connected routes (directly attached subnet or host)\n Statically configured routes\n-Routing Information Protocol next-generation (IPv6) (RIPng)\n+Open Shortest Path First (IPv6) (OSPFv3)\n Intermediate System to Intermediate System (IS-IS)\n Border Gateway Protocol (BGP)\n Babel routing protocol (Babel)\n Next Hop Resolution Protocol (NHRP)\n Route map reference\n-Route map name\n-clear ip prefix-list\n-Reset functions\n-IP information\n-Build a prefix list\n-show bgp ipv4 (encap|multicast|unicast|vpn) dampening flap-statistics regexp .LINE\n-Show running system information\n-BGP information\n-IP information\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Display detailed information about dampening\n-Display flap statistics of routes\n-Display routes matching the AS path regular expression\n-A regular-expression to match the BGP AS paths\n-show ip bgp dampening flap-statistics cidr-only\n+Pointer to route-map entries\n+ip irdp debug misc\n+no lsp-gen-interval level-2\n+Negate a command or set its defaults\n+Minimum interval between regenerating same LSP\n+Set interval for level 2 only\n+show ip extcommunity-list (<1-500>|WORD)\n Show running system information\n IP information\n-BGP information\n-Display detailed information about dampening\n-Display flap statistics of routes\n-Display only routes with non-natural netmasks\n-show ip bgp ipv4 (unicast|multicast) large-community (AA:BB:CC)\n+List extended-community list\n+Extcommunity-list number\n+Extcommunity-list name\n+debug ospf lsa (generate|flooding|install|refresh)\n+Debugging functions (see also 'undebug')\n+OSPF information\n+OSPF Link State Advertisement\n+LSA Generation\n+LSA Flooding\n+LSA Install/Delete\n+LSA Refresh\n+debug zebra fpm\n+Debugging functions (see also 'undebug')\n+Zebra configuration\n+Debug zebra FPM events\n+service advanced-vty\n+Set up miscellaneous service\n+Enable advanced mode vty interface\n+show ip ospf database (asbr-summary|external|network|router|summary|nssa-external|opaque-link|opaque-area|opaque-as) A.B.C.D (self-originate|)\n Show running system information\n IP information\n-BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Display routes matching the large-communities\n-large-community number\n-clear ip bgp * encap unicast soft out\n+OSPF information\n+Database summary\n+ASBR summary link states\n+External link states\n+Network link states\n+Router link states\n+Network summary link states\n+NSSA external link state\n+Link local Opaque-LSA\n+Link area Opaque-LSA\n+Link AS Opaque-LSA\n+Link State ID (as an IP address)\n+Self-originated link states\n+clear bgp ipv6 <1-4294967295> soft\n Reset functions\n-IP information\n BGP information\n-Clear all peers\n Address family\n-Address Family Modifier\n-Soft reconfig\n-Soft reconfig outbound update\n-max-lsp-lifetime <350-65535>\n-Maximum LSP lifetime\n-LSP lifetime in seconds\n-Negate a command or set its defaults\n-Jump to another Route-Map after match+set\n-no ipv6 ospf6 passive\n-Negate a command or set its defaults\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-passive interface: No Adjacency will be formed on this I/F\n-clear ip bgp dampening\n-Reset functions\n-IP information\n-BGP information\n-Clear route flap dampening information\n-ipv6 ospf6 transmit-delay <1-3600>\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Transmit delay of this interface\n-<1-65535> Seconds\n-clear ip bgp * vpnv4 unicast in\n-Reset functions\n+Clear peers with the AS number\n+Soft reconfig inbound and outbound updates\n+ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) tag <1-4294967295>vrf <0-65535>\n IP information\n+Establish static routes\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n+Set tag for this route\n+Tag value\n+Specify the VRF\n+The VRF ID\n+show bgp ipv6 X:X::X:X\n+Show running system information\n BGP information\n-Clear all peers\n Address family\n-Address Family Modifier\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-show ip bgp view WORD neighbors (A.B.C.D|X:X::X:X) advertised-routes\n+Network in the BGP routing table to display\n+timers basic <0-65535> <0-65535> <0-65535>\n+RIPng timers setup\n+Basic timer\n+Routing table update timer value in second. Default is 30.\n+Routing information timeout timer. Default is 180.\n+Garbage collection timer. Default is 120.\n+show bgp view WORD ipv4 (unicast|multicast) rsclient summary\n Show running system information\n-IP information\n BGP information\n BGP view\n View name\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display the routes advertised to a BGP neighbor\n-bgp default local-preference <0-4294967295>\n-BGP specific commands\n-Configure BGP defaults\n-local preference (higher=more preferred)\n-Configure default local preference value\n-neighbor A.B.C.D\n-Specify a neighbor router\n-Neighbor address\n-no router zebra\n-Negate a command or set its defaults\n-Disable a routing process\n-Stop connection to zebra daemon\n-show bgp ipv6 (encap|multicast|unicast|vpn) large-community-list (<1-500>|WORD)\n-Show running system information\n-BGP information\n Address family\n-Address family modifier\n-Address family modifier\n-Address family modifier\n-Address family modifier\n-Display routes matching the large-community-list\n-large-community-list number\n-large-community-list name\n-ip community-list expanded WORD (deny|permit) .LINE\n-IP information\n-Add a community list entry\n-Add an expanded community-list entry\n-Community list name\n-Specify community to reject\n-Specify community to accept\n-An ordered list as a regular-expression\n-network A.B.C.D route-map WORD\n-Specify a network to announce via BGP\n-Network number\n-Route-map to modify the attributes\n-Name of the route map\n-show ipv6 bgp X:X::X:X\n-Show running system information\n-IP information\n-BGP information\n-Network in the BGP routing table to display\n-show bgp ipv4 (encap|multicast|unicast|vpn) dampened-paths\n-Show running system information\n-BGP information\n-IP information\n-Address Family modifier\n Address Family modifier\n Address Family modifier\n-Address Family modifier\n-Display paths suppressed due to dampening\n-no ip ospf hello-interval\n+Information about Route Server Clients\n+Summary of all Route Server Clients\n+no match ipv6 address prefix-list\n Negate a command or set its defaults\n-IP Information\n-OSPF interface commands\n-Time between HELLO packets\n-no offset-list WORD (in|out) <0-16> IFNAME\n+Match values from routing table\n+IPv6 information\n+Match address of route\n+Match entries of prefix-lists\n+no set atomic-aggregate\n Negate a command or set its defaults\n-Modify RIP metric\n-Access-list name\n-For incoming updates\n-For outgoing updates\n-Metric value\n-Interface to match\n-no ipv6 prefix-list WORD seq <1-4294967295> (deny|permit) X:X::X:X/M ge <0-128>\n+Set values in destination routing protocol\n+BGP atomic aggregate attribute\n+no isis hello-multiplier <2-100> level-2\n Negate a command or set its defaults\n-IPv6 information\n-Build a prefix list\n-Name of a prefix list\n-sequence number of an entry\n-Sequence number\n-Specify packets to reject\n-Specify packets to forward\n-IPv6 prefix /, e.g., 3ffe::/16\n-Minimum prefix length to be matched\n-Minimum prefix length\n-clear ip bgp <1-4294967295> vpnv4 unicast soft\n-Reset functions\n-IP information\n+IS-IS commands\n+Set multiplier for Hello holding time\n+Hello multiplier value\n+Specify hello multiplier for level-2 IIHs\n+no lsp-refresh-interval\n+Negate a command or set its defaults\n+LSP refresh interval in seconds\n+no debug ospf6 flooding\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+Open Shortest Path First (OSPF) for IPv6\n+Debug OSPFv3 flooding function\n+bgp cluster-id A.B.C.D\n BGP information\n-Clear peers with the AS number\n-Address family\n-Address Family Modifier\n-Soft reconfig inbound and outbound updates\n-no distance <1-255> A.B.C.D/M\n+Configure Route-Reflector Cluster-id\n+Route-Reflector Cluster-id in IP address format\n+no match ip next-hop (<1-199>|<1300-2699>|WORD)\n Negate a command or set its defaults\n-Define an administrative distance\n-Administrative distance\n-IP source prefix\n-no set-overload-bit\n-Reset overload bit to accept transit traffic\n-Reset overload bit\n-no ip extcommunity-list <100-500>\n+Match values from routing table\n+IP information\n+Match next-hop address of route\n+IP access-list number\n+IP access-list number (expanded range)\n+IP Access-list name\n+no ip extcommunity-list expanded WORD\n Negate a command or set its defaults\n IP information\n Add a extended community list entry\n-Extended Community list number (expanded)\n-undebug pim packet-dump receive\n-Disable debugging functions (see also 'debug')\n-PIM protocol activity\n-PIM packet dump\n-Dump received packets\n-show bgp rsclient summary\n+Specify expanded extcommunity-list\n+Extended Community list name\n+show bgp view WORD ipv6 (unicast|multicast) rsclient (A.B.C.D|X:X::X:X) X:X::X:X\n Show running system information\n BGP information\n-Information about Route Server Clients\n-Summary of all Route Server Clients\n-show ipv6 ospf6 spf tree\n-Show running system information\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Shortest Path First calculation\n-Show SPF tree\n-no stub-router administrative\n-Negate a command or set its defaults\n-Make router a stub router\n-Advertise ability to be a transit router\n-Administratively applied, for an indefinite period\n-no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (authentication|)\n+BGP view\n+View name\n+Address family\n+Address Family modifier\n+Address Family modifier\n+Information about Route Server Client\n+Neighbor address\n+IPv6 address\n+Network in the BGP routing table to display\n+no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (hello-interval|retransmit-interval|transmit-delay|dead-interval)\n Negate a command or set its defaults\n OSPF area parameters\n OSPF area ID in IP address format\n OSPF area ID as a decimal value\n Configure a virtual link\n Router ID of the remote ABR\n-Enable authentication on this virtual link\n-dummy string \n-show ip bgp neighbors\n+Time between HELLO packets\n+Time between retransmitting lost link state advertisements\n+Link state transmit delay\n+Interval after which a neighbor is declared dead\n+show ip bgp flap-statistics prefix-list WORD\n Show running system information\n IP information\n BGP information\n-Detailed information on TCP and BGP neighbor connections\n-show bgp ipv6 (encap|multicast|unicast|vpn) dampening flap-statistics X:X::X:X/M\n+Display flap statistics of routes\n+Display routes conforming to the prefix-list\n+IP prefix-list name\n+neighbor (A.B.C.D|X:X::X:X) interface WORD\n+Specify neighbor router\n+Neighbor address\n+IPv6 address\n+Interface\n+Interface name\n+no ipv6 access-list WORD (deny|permit) X:X::X:X/M\n+Negate a command or set its defaults\n+IPv6 information\n+Add an access list entry\n+IPv6 zebra access-list\n+Specify packets to reject\n+Specify packets to forward\n+Prefix to match. e.g. 3ffe:506::/32\n+show ip bgp dampening flap-statistics\n Show running system information\n+IP information\n BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n Display detailed information about dampening\n Display flap statistics of routes\n-IP prefix /, e.g., 35.0.0.0/8\n-no bgp route-reflector allow-outbound-policy\n-Negate a command or set its defaults\n-BGP specific commands\n-Allow modifications made by out route-map\n-on ibgp neighbors\n-debug ospf6 spf time\n-Debugging functions (see also 'undebug')\n-Open Shortest Path First (OSPF) for IPv6\n-Debug SPF Calculation\n-Measure time taken by SPF Calculation\n-show debugging pim\n-Show running system information\n-Debugging functions (see also 'undebug')\n-PIM information\n-clear bgp peer-group WORD soft\n+clear bgp ipv6 <1-4294967295> soft out\n Reset functions\n BGP information\n-Clear all members of peer-group\n-BGP peer-group name\n+Address family\n+Clear peers with the AS number\n Soft reconfig inbound and outbound updates\n-ip ospf transmit-delay <1-65535> A.B.C.D\n+Resend all outbound updates\n+ip ospf dead-interval minimal hello-multiplier <1-10>\n IP Information\n OSPF interface commands\n-Link state transmit delay\n+Interval after which a neighbor is declared dead\n+Minimal 1s dead-interval with fast sub-second hellos\n+Hello multiplier factor\n+Number of Hellos to send each second\n+no isis psnp-interval <1-120>\n+Negate a command or set its defaults\n+IS-IS commands\n+Set PSNP interval in seconds\n+PSNP interval value\n+ip ospf authentication A.B.C.D\n+IP Information\n+OSPF interface commands\n+Enable authentication on this interface\n Address of interface\n-show bgp ipv6 (encap|multicast|unicast|vpn) large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n-Show running system information\n-BGP information\n-Address family\n-Address family modifier\n-Address family modifier\n-Address family modifier\n-Address family modifier\n-Display routes matching the large-communities\n-large-community number\n-large-community number\n-large-community number\n-no network X:X::X:X/M route-map WORD\n+no isis priority <0-127>\n Negate a command or set its defaults\n-Specify a network to announce via BGP\n-IPv6 prefix /\n-Route-map to modify the attributes\n-Name of the route map\n-distance ospf6 inter-area <1-255> external <1-255> intra-area <1-255>\n-Define an administrative distance\n-OSPF6 Administrative distance\n-Inter-area routes\n-Distance for inter-area routes\n-External routes\n-Distance for external routes\n-Intra-area routes\n-Distance for intra-area routes\n-clear ip bgp view WORD * ipv4 (unicast|multicast) soft out\n-Reset functions\n-IP information\n-BGP information\n-BGP view\n-view name\n-Clear all peers\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Resend all outbound updates\n-no distance bgp <1-255> <1-255> <1-255>\n+IS-IS commands\n+Set priority for Designated Router election\n+Priority value\n+no set-overload-bit\n+Reset overload bit to accept transit traffic\n+Reset overload bit\n+no set extcommunity rt\n Negate a command or set its defaults\n-Define an administrative distance\n-BGP distance\n-Distance for routes external to the AS\n-Distance for routes internal to the AS\n-Distance for local routes\n-set large-community none\n Set values in destination routing protocol\n-BGP large community attribute\n-No large community attribute\n-clear bgp <1-4294967295> soft\n-Reset functions\n-BGP information\n-Clear peers with the AS number\n-Soft reconfig inbound and outbound updates\n-show ip bgp large-community (AA:BB:CC)\n+BGP extended community attribute\n+Route Target extended community\n+show isis neighbor WORD\n+Show running system information\n+ISIS network information\n+ISIS neighbor adjacencies\n+System id\n+show bgp ipv6 large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n Show running system information\n-IP information\n BGP information\n+Address family\n Display routes matching the large-communities\n large-community number\n-no debug ospf6 neighbor (state|event)\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-Open Shortest Path First (OSPF) for IPv6\n-Debug OSPFv3 Neighbor\n-Debug OSPFv3 Neighbor State Change\n-Debug OSPFv3 Neighbor Event\n-metric-style (narrow|transition|wide)\n-Use old-style (ISO 10589) or new-style packet formats\n-Use old style of TLVs with narrow metric\n-Send and accept both styles of TLVs during transition\n-Use new style of TLVs to carry wider metric\n-no ospf retransmit-interval\n-Negate a command or set its defaults\n-OSPF interface commands\n-Time between retransmitting lost link state advertisements\n-no debug ospf6 border-routers router-id\n+large-community number\n+large-community number\n+no neighbor (A.B.C.D|X:X::X:X|WORD) local-as <1-4294967295> no-prepend replace-as\n Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-Open Shortest Path First (OSPF) for IPv6\n-Debug border router\n-Debug specific border router\n-neighbor (A.B.C.D|X:X::X:X|WORD) enforce-multihop\n Specify neighbor router\n Neighbor address\n Neighbor IPv6 address\n Neighbor tag\n-Enforce EBGP neighbors perform multihop\n-no debug ospf6 spf process\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-Open Shortest Path First (OSPF) for IPv6\n-Quit Debugging SPF Calculation\n-Quit Debugging Detailed SPF Process\n-no ip rip authentication mode (md5|text) auth-length (rfc|old-ripd)\n-Negate a command or set its defaults\n-IP information\n-Routing Information Protocol\n-Authentication control\n-Authentication mode\n-Keyed message digest\n-Clear text authentication\n-MD5 authentication data length\n-RFC compatible\n-Old ripd compatible\n-no ipv6 route X:X::X:X/M X:X::X:X INTERFACE tag <1-4294967295>vrf <0-65535>\n-Negate a command or set its defaults\n-IP information\n-Establish static routes\n-IPv6 destination prefix (e.g. 3ffe:506::/32)\n-IPv6 gateway address\n-IPv6 gateway interface name\n-Set tag for this route\n-Tag value\n-Specify the VRF\n-The VRF ID\n-send-lifetime HH:MM:SS <1-31> MONTH <1993-2035> infinite\n-Set send lifetime of the key\n-Time to start\n-Day of th month to start\n-Month of the year to start\n-Year to start\n-Never expires\n-ipv6 prefix-list WORD (deny|permit) X:X::X:X/M ge <0-128>\n-IPv6 information\n-Build a prefix list\n-Name of a prefix list\n-Specify packets to reject\n-Specify packets to forward\n-IPv6 prefix /, e.g., 3ffe::/16\n-Minimum prefix length to be matched\n-Minimum prefix length\n-no bgp fast-external-failover\n-Negate a command or set its defaults\n-BGP information\n-Immediately reset session if a link to a directly connected external peer goes down\n-(ip|ipv6) nhrp (shortcut|redirect)\n-IP information\n-IPv6 information\n-Next Hop Resolution Protocol functions\n-Allow shortcut establishment\n-Send redirect notifications\n-show ip bgp route-map WORD\n+Specify a local-as number\n+AS number used as local AS\n+Do not prepend local-as to updates from ebgp peers\n+Do not prepend local-as to updates from ibgp peers\n+show ip access-list (<1-99>|<100-199>|<1300-1999>|<2000-2699>|WORD)\n Show running system information\n IP information\n+List IP access lists\n+IP standard access list\n+IP extended access list\n+IP standard access list (expanded range)\n+IP extended access list (expanded range)\n+IP zebra access-list\n+clear bgp (A.B.C.D|X:X::X:X) in\n+Reset functions\n BGP information\n-Display routes matching the route-map\n-A route-map to match on\n-no neighbor (A.B.C.D|X:X::X:X) strict-capability-match\n-Negate a command or set its defaults\n-Specify neighbor router\n-Neighbor address\n-IPv6 address\n-Strict capability negotiation match\n-show ip rpf A.B.C.D vrf all\n-Show running system information\n+BGP neighbor address to clear\n+BGP IPv6 neighbor to clear\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+ip mroute A.B.C.D/M (A.B.C.D|INTERFACE) <1-255> vrf <0-65535>\n IP information\n-Display RPF information for multicast source\n-IP multicast source address (e.g. 10.0.0.0)\n+Configure static unicast route into MRIB for multicast RPF lookup\n+IP destination prefix (e.g. 10.0.0.0/8)\n+Nexthop address\n+Nexthop interface name\n+Distance\n Specify the VRF\n-All VRFs\n-ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) (reject|blackhole) tag <1-4294967295> <1-255>vrf <0-65535>\n+The VRF ID\n+ipv6 route X:X::X:X/M X:X::X:X INTERFACE <1-255> vrf <0-65535>\n IP information\n Establish static routes\n IPv6 destination prefix (e.g. 3ffe:506::/32)\n IPv6 gateway address\n IPv6 gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Set tag for this route\n-Tag value\n Distance value for this prefix\n Specify the VRF\n The VRF ID\n-no ip mroute A.B.C.D/M (A.B.C.D|INTERFACE) <1-255> vrf <0-65535>\n-IP information\n-Configure static unicast route into MRIB for multicast RPF lookup\n-IP destination prefix (e.g. 10.0.0.0/8)\n-Nexthop address\n-Nexthop interface name\n-Distance\n-Specify the VRF\n-The VRF ID\n-ip address A.B.C.D/M label LINE\n-Interface Internet Protocol config commands\n-Set the IP address of an interface\n-IP address (e.g. 10.0.0.1/8)\n-Label of this address\n-no router isis WORD\n-Enable a routing process\n-ISO IS-IS\n-ISO Routing area tag\n-packet-loss PERCENTAGE\n-Unidirectional Link Packet Loss\n-percentage of total traffic by 0.000003tep and less than 50.331642%\n-ipv6 access-list WORD remark .LINE\n+match metric <0-4294967295>\n+Match values from routing table\n+Match metric of route\n+Metric value\n+no spf-interval\n+Negate a command or set its defaults\n+Minimum interval between SPF calculations\n+show bgp ipv6 (encap|multicast|unicast|vpn) dampening flap-statistics regexp .LINE\n+Show running system information\n+BGP information\n IPv6 information\n-Add an access list entry\n-IPv6 zebra access-list\n-Access list entry comment\n-Comment up to 100 characters\n-show bgp view WORD ipv6 rsclient (A.B.C.D|X:X::X:X) X:X::X:X\n+Address Family Modifier\n+Address Family Modifier\n+Address Family Modifier\n+Address Family Modifier\n+Display detailed information about dampening\n+Display flap statistics of routes\n+Display routes matching the AS path regular expression\n+A regular-expression to match the BGP AS paths\n+show ipv6 mbgp X:X::X:X/M longer-prefixes\n Show running system information\n+IPv6 information\n+MBGP information\n+IPv6 prefix /, e.g., 3ffe::/16\n+Display route and more specific routes\n+area (A.B.C.D|<0-4294967295>) range A.B.C.D/M cost <0-16777215>\n+OSPF area parameters\n+OSPF area ID in IP address format\n+OSPF area ID as a decimal value\n+Summarize routes matching address/mask (border routers only)\n+Area range prefix\n+User specified metric for this range\n+Advertised metric for this range\n+clear bgp ipv6 * out\n+Reset functions\n BGP information\n-BGP view\n-BGP view name\n-IP6_STRInformation about Route Server Client\n-Neighbor address\n-IPv6 address\n-Network in the BGP routing table to display\n-ip route A.B.C.D/M (reject|blackhole)\n-IP information\n-Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE|null0) <1-255>\n-IP information\n-Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n-IP gateway address\n-IP gateway interface name\n-Null interface\n-Distance value for this route\n-no ip extcommunity-list <1-99> (deny|permit) .AA:NN\n+Address family\n+Clear all peers\n+Resend all outbound updates\n+show bgp X:X::X:X/M longer-prefixes\n+Show running system information\n+BGP information\n+IPv6 prefix /\n+Display route and more specific routes\n+show bgp ipv4 (encap|multicast|unicast|vpn) prefix-list WORD\n+Show running system information\n+BGP information\n+Address family\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n+Display routes conforming to the prefix-list\n+IP prefix-list name\n+no ip extcommunity-list expanded WORD (deny|permit) .LINE\n Negate a command or set its defaults\n IP information\n Add a extended community list entry\n-Extended Community list number (standard)\n+Specify expanded extcommunity-list\n+Community list name\n Specify community to reject\n Specify community to accept\n-Extended community attribute in 'rt aa:nn_or_IPaddr:nn' OR 'soo aa:nn_or_IPaddr:nn' format\n-no debug ospf6 spf time\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-Open Shortest Path First (OSPF) for IPv6\n-Quit Debugging SPF Calculation\n-Quit Measuring time taken by SPF Calculation\n-no match tag\n+An ordered list as a regular-expression\n+default-metric <0-16777214>\n+Set metric of redistributed routes\n+Default metric\n+no timers throttle lsa all\n Negate a command or set its defaults\n-Match values from routing table\n-Match tag of route\n-show bgp ipv4 (encap|multicast|unicast|vpn) neighbors (A.B.C.D|X:X::X:X) dampened-routes\n+Adjust routing timers\n+Throttling adaptive timer\n+LSA delay between transmissions\n+undebug bgp filters\n+Disable debugging functions (see also 'debug')\n+BGP information\n+BGP filters\n+show bgp view WORD ipv6 neighbors (A.B.C.D|X:X::X:X) received prefix-filter\n Show running system information\n BGP information\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n+BGP view\n+View name\n+Address family\n Detailed information on TCP and BGP neighbor connections\n Neighbor to display information about\n Neighbor to display information about\n-Display the dampened routes received from neighbor\n-show bgp ipv6 vpn rd ASN:nn_or_IP-address:nn\n+Display information received from a BGP neighbor\n+Display the prefixlist filter\n+show interface IFNAME vrf <0-65535>\n Show running system information\n-BGP information\n-Address Family\n-Display VPN NLRI specific information\n-Display information for a route distinguisher\n-VPN Route Distinguisher\n-no set community\n-Negate a command or set its defaults\n-Set values in destination routing protocol\n-BGP community attribute\n-debug bgp\n-ipv6 nd prefix X:X::X:X/M (<0-4294967295>|infinite) (<0-4294967295>|infinite) (no-autoconfig|) (off-link|)\n+Interface status and configuration\n+Interface name\n+Specify the VRF\n+The VRF ID\n+ipv6 nd prefix X:X::X:X/M (off-link|) (no-autoconfig|)\n Interface IPv6 config commands\n Neighbor discovery\n Prefix information\n IPv6 prefix\n-Valid lifetime in seconds\n-Infinite valid lifetime\n-Preferred lifetime in seconds\n-Infinite preferred lifetime\n-Do not use prefix for autoconfiguration\n Do not use prefix for onlink determination\n-clear bgp ipv6 <1-4294967295> soft out\n+Do not use prefix for autoconfiguration\n+clear ip bgp external ipv4 (unicast|multicast) soft\n Reset functions\n+IP information\n BGP information\n+Clear all external peers\n Address family\n-Clear peers with the AS number\n+Address Family modifier\n+Address Family modifier\n Soft reconfig inbound and outbound updates\n-Resend all outbound updates\n-no neighbor (A.B.C.D|X:X::X:X|WORD) timers connect <1-65535>\n-Negate a command or set its defaults\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-BGP per neighbor timers\n-BGP connect timer\n-Connect timer\n-no ip ospf dead-interval <1-65535> A.B.C.D\n+clear ip mroute\n+Reset functions\n+IP information\n+Reset multicast routes\n+no distance <1-255> A.B.C.D/M WORD\n Negate a command or set its defaults\n-IP Information\n-OSPF interface commands\n-Interval after which a neighbor is declared dead\n-Address of interface\n-show ip bgp paths\n+Define an administrative distance\n+Administrative distance\n+IP source prefix\n+Access list name\n+show bgp ipv4 (encap|multicast|unicast|vpn) flap-statistics regexp .LINE\n Show running system information\n-IP information\n BGP information\n-Path information\n-show ipv6 route vrf <0-65535>\n+IP information\n+Address Family Modifier\n+Address Family Modifier\n+Address Family Modifier\n+Address Family Modifier\n+Display flap statistics of routes\n+Display routes matching the AS path regular expression\n+A regular-expression to match the BGP AS paths\n+show ip bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n Show running system information\n IP information\n-IPv6 routing table\n-Specify the VRF\n-The VRF ID\n-no ip route A.B.C.D A.B.C.D (reject|blackhole)\n+BGP information\n+Display routes matching the communities\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+Exact match of the communities\n+no ip prefix-list WORD (deny|permit) A.B.C.D/M le <0-32>\n Negate a command or set its defaults\n IP information\n-Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-ip mroute A.B.C.D/M (A.B.C.D|INTERFACE) <1-255> vrf <0-65535>\n-ipv6 prefix-list sequence-number\n-IPv6 information\n Build a prefix list\n-Include/exclude sequence numbers in NVGEN\n-show isis topology\n+Name of a prefix list\n+Specify packets to reject\n+Specify packets to forward\n+IP prefix /, e.g., 35.0.0.0/8\n+Maximum prefix length to be matched\n+Maximum prefix length\n+route IPV6ADDR\n+Static route setup\n+Set static RIPng route announcement\n+show ip prefix-list summary\n Show running system information\n-IS-IS information\n-IS-IS paths to Intermediate Systems\n-show bgp ipv6 community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n+IP information\n+Build a prefix list\n+Summary of prefix lists\n+show ip bgp ipv4 (unicast|multicast) A.B.C.D/M\n+Show running system information\n+IP information\n+BGP information\n+Address family\n+Address Family modifier\n+Address Family modifier\n+IP prefix /, e.g., 35.0.0.0/8\n+show bgp ipv6 community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n Show running system information\n BGP information\n Address family\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n@@ -2768,74 +2636,149 @@\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-Exact match of the communities\n-admin-grp BITPATTERN\n-Administrative group membership\n-32-bit Hexadecimal value (e.g. 0xa1)\n-mpls-te router-address A.B.C.D\n-MPLS-TE specific commands\n-Stable IP address of the advertising router\n-MPLS-TE router address in IPv4 address format\n-no ip igmp query-interval\n+clear ip bgp A.B.C.D in prefix-filter\n+Reset functions\n+IP information\n+BGP information\n+BGP neighbor address to clear\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+Push out the existing ORF prefix-list\n+no (ip|ipv6) nhrp registration (no-unique)\n Negate a command or set its defaults\n IP information\n-Enable IGMP operation\n-IGMP host query interval\n-no ip extcommunity-list standard WORD (deny|permit) .AA:NN\n+IPv6 information\n+Next Hop Resolution Protocol functions\n+Registration configuration\n+Don't set unique flag\n+clear bgp ipv6 peer-group WORD soft\n+Reset functions\n+BGP information\n+Address family\n+Clear all members of peer-group\n+BGP peer-group name\n+Soft reconfig inbound and outbound updates\n+clear ip bgp <1-4294967295> ipv4 (unicast|multicast) in\n+Reset functions\n+IP information\n+BGP information\n+Clear peers with the AS number\n+Address family\n+Address Family modifier\n+Address Family modifier\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+no access-list (<1-99>|<1300-1999>) (deny|permit) A.B.C.D A.B.C.D\n+Negate a command or set its defaults\n+Add an access list entry\n+IP standard access list\n+IP standard access list (expanded range)\n+Specify packets to reject\n+Specify packets to forward\n+Address to match\n+Wildcard bits\n+no ip large-community-list <1-99>\n Negate a command or set its defaults\n IP information\n-Add a extended community list entry\n-Specify standard extcommunity-list\n-Extended Community list name\n-Specify community to reject\n-Specify community to accept\n-Extended community attribute in 'rt aa:nn_or_IPaddr:nn' OR 'soo aa:nn_or_IPaddr:nn' format\n-show bgp neighbors (A.B.C.D|X:X::X:X)\n+Add a large community list entry\n+Large Community list number (standard)\n+ipv6 prefix-list WORD (deny|permit) X:X::X:X/M ge <0-128>\n+IPv6 information\n+Build a prefix list\n+Name of a prefix list\n+Specify packets to reject\n+Specify packets to forward\n+IPv6 prefix /, e.g., 3ffe::/16\n+Minimum prefix length to be matched\n+Minimum prefix length\n+redistribute (kernel|connected|static|rip|ospf|isis|pim|babel|nhrp)\n+Redistribute information from another routing protocol\n+Kernel routes (not installed via the zebra RIB)\n+Connected routes (directly attached subnet or host)\n+Statically configured routes\n+Routing Information Protocol (RIP)\n+Open Shortest Path First (OSPFv2)\n+Intermediate System to Intermediate System (IS-IS)\n+Protocol Independent Multicast (PIM)\n+Babel routing protocol (Babel)\n+Next Hop Resolution Protocol (NHRP)\n+show ip route A.B.C.D vrf <0-65535>\n Show running system information\n+IP information\n+IP routing table\n+Network in the IP routing table to display\n+Specify the VRF\n+The VRF ID\n+show ip bgp attribute-info\n+Show running system information\n+IP information\n BGP information\n+List all bgp attribute information\n+show bgp ipv6 vpn rd ASN:nn_or_IP-address:nn neighbors (A.B.C.D|X:X::X:X) routes\n+Show running system information\n+BGP information\n+Address Family\n+Address Family modifier\n+Display information for a route distinguisher\n+VPN Route Distinguisher\n Detailed information on TCP and BGP neighbor connections\n Neighbor to display information about\n-Neighbor to display information about\n-no ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) tag <1-4294967295>vrf <0-65535>\n-no ospf message-digest-key <1-255>\n+Display routes learned from neighbor\n+show bgp ipv6 (encap|multicast|unicast|vpn) community-list (<1-500>|WORD)\n+Show running system information\n+BGP information\n+Address family\n+Address family modifier\n+Address family modifier\n+Address family modifier\n+Address family modifier\n+Display routes matching the community-list\n+community-list number\n+community-list name\n+debug bgp updates (in|out)\n+Debugging functions (see also 'undebug')\n+BGP information\n+BGP updates\n+Inbound updates\n+Outbound updates\n+clear ip bgp A.B.C.D vpnv4 unicast out\n+Reset functions\n+IP information\n+BGP information\n+BGP neighbor address to clear\n+Address family\n+Address Family Modifier\n+Resend all outbound updates\n+no ip ospf transmit-delay\n Negate a command or set its defaults\n+IP Information\n OSPF interface commands\n-Message digest authentication password (key)\n-area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Configure a virtual link\n-Router ID of the remote ABR\n-no ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) tag <1-4294967295> <1-255>vrf <0-65535>\n-show isis database detail WORD\n-Show running system information\n-IS-IS information\n-IS-IS link state database\n-Detailed information\n-show ipv6 ospf6 linkstate router A.B.C.D\n-Show running system information\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Display linkstate routing table\n-Display Router Entry\n-Specify Router ID as IPv4 address notation\n-show bgp ipv4 community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n+Link state transmit delay\n+no ipv6 prefix-list WORD (deny|permit) X:X::X:X/M le <0-128> ge <0-128>\n+Negate a command or set its defaults\n+IPv6 information\n+Build a prefix list\n+Name of a prefix list\n+Specify packets to reject\n+Specify packets to forward\n+IPv6 prefix /, e.g., 3ffe::/16\n+Maximum prefix length to be matched\n+Maximum prefix length\n+Minimum prefix length to be matched\n+Minimum prefix length\n+show ip bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n Show running system information\n-BGP information\n IP information\n+BGP information\n+Address family\n+Address Family modifier\n+Address Family modifier\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n@@ -2846,229 +2789,326 @@\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n Exact match of the communities\n-ipv6 nd home-agent-lifetime <0-65520>\n+show ipv6 route (kernel|connected|static|ripng|ospf6|isis|bgp|babel|nhrp)\n+Show running system information\n+IP information\n+IP routing table\n+Kernel routes (not installed via the zebra RIB)\n+Connected routes (directly attached subnet or host)\n+Statically configured routes\n+Routing Information Protocol next-generation (IPv6) (RIPng)\n+Open Shortest Path First (IPv6) (OSPFv3)\n+Intermediate System to Intermediate System (IS-IS)\n+Border Gateway Protocol (BGP)\n+Babel routing protocol (Babel)\n+Next Hop Resolution Protocol (NHRP)\n+no max-lsp-lifetime level-1 <350-65535>\n+Negate a command or set its defaults\n+Maximum LSP lifetime for Level 1 only\n+LSP lifetime for Level 1 only in seconds\n+ipv6 nd suppress-ra\n Interface IPv6 config commands\n Neighbor discovery\n-Home Agent lifetime\n-Home Agent lifetime in seconds (0 to track ra-lifetime)\n-show bgp ipv4 (encap|multicast|unicast|vpn) neighbors (A.B.C.D|X:X::X:X) flap-statistics\n+Suppress Router Advertisement\n+ip large-community-list <100-500> (deny|permit) .LINE\n+IP information\n+Add a large community list entry\n+Large Community list number (expanded)\n+Specify large community to reject\n+Specify large community to accept\n+An ordered list as a regular-expression\n+no access-list (<100-199>|<2000-2699>) (deny|permit) ip any A.B.C.D A.B.C.D\n+Negate a command or set its defaults\n+Add an access list entry\n+IP extended access list\n+IP extended access list (expanded range)\n+Specify packets to reject\n+Specify packets to forward\n+Any Internet Protocol\n+Any source host\n+Destination address\n+Destination Wildcard bits\n+no delay-variation\n+Negate a command or set its defaults\n+Disable Unidirectional Delay Variation on this interface\n+no ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) (reject|blackhole) tag <1-4294967295>\n+Negate a command or set its defaults\n+IP information\n+Establish static routes\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Set tag for this route\n+Tag value\n+ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole) <1-255> vrf <0-65535>\n+IP information\n+Establish static routes\n+IP destination prefix (e.g. 10.0.0.0/8)\n+IP gateway address\n+IP gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Distance value for this route\n+Specify the VRF\n+The VRF ID\n+show ipv6 access-list\n Show running system information\n+IPv6 information\n+List IPv6 access lists\n+isis priority <0-127>\n+IS-IS commands\n+Set priority for Designated Router election\n+Priority value\n+clear bgp external in prefix-filter\n+Reset functions\n BGP information\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display flap statistics of the routes learned from neighbor\n-debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) (detail|)\n-Debugging functions\n-OSPF information\n-OSPF packets\n-OSPF Hello\n-OSPF Database Description\n-OSPF Link State Request\n-OSPF Link State Update\n-OSPF Link State Acknowledgment\n-OSPF all packets\n-Packet sent\n-Packet received\n-Detail Information\n-show bgp view WORD\n-Show running system information\n+Clear all external peers\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+Push out prefix-list ORF and do inbound soft reconfig\n+no ipv6 nd reachable-time <1-3600000>\n+Negate a command or set its defaults\n+Interface IPv6 config commands\n+Neighbor discovery\n+Reachable time\n+Reachable time in milliseconds\n+isis hello-multiplier <2-100> level-2\n+IS-IS commands\n+Set multiplier for Hello holding time\n+Hello multiplier value\n+Specify hello multiplier for level-2 IIHs\n+no debug pim packet-dump receive\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+PIM protocol activity\n+PIM packet dump\n+Dump received packets\n+no ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE|null0) tag <1-4294967295>\n+Negate a command or set its defaults\n+IP information\n+Establish static routes\n+IP destination prefix\n+IP destination prefix mask\n+IP gateway address\n+IP gateway interface name\n+Null interface\n+Tag of this route\n+Tag value\n+clear bgp peer-group WORD in prefix-filter\n+Reset functions\n BGP information\n-BGP view\n-View name\n-send-lifetime HH:MM:SS MONTH <1-31> <1993-2035> infinite\n-Set send lifetime of the key\n-Time to start\n-Month of the year to start\n-Day of th month to start\n-Year to start\n-Never expires\n-show bgp view WORD ipv6 (unicast|multicast) rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M\n-Show running system information\n+Clear all members of peer-group\n+BGP peer-group name\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+Push out prefix-list ORF and do inbound soft reconfig\n+clear bgp * rsclient\n+Reset functions\n BGP information\n-BGP view\n-View name\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Information about Route Server Client\n-Neighbor address\n-IPv6 address\n-IP prefix /, e.g., 3ffe::/16\n-show ip bgp neighbors (A.B.C.D|X:X::X:X) advertised-routes\n+Clear all peers\n+Soft reconfig for rsclient RIB\n+show bgp ipv4 encap rd ASN:nn_or_IP-address:nn neighbors (A.B.C.D|X:X::X:X) advertised-routes\n Show running system information\n-IP information\n BGP information\n+Address Family\n+Display ENCAP NLRI specific information\n+Display information for a route distinguisher\n+ENCAP Route Distinguisher\n Detailed information on TCP and BGP neighbor connections\n Neighbor to display information about\n Neighbor to display information about\n Display the routes advertised to a BGP neighbor\n-show bgp ipv6 (encap|multicast|unicast|vpn) flap-statistics X:X::X:X/M longer-prefixes\n-Show running system information\n+no debug bgp nht\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Display flap statistics of routes\n-IP prefix /, e.g., 35.0.0.0/8\n-Display route and more specific routes\n-neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged as-path med next-hop\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-BGP attribute is propagated unchanged to this neighbor\n-As-path attribute\n-Med attribute\n-Nexthop attribute\n-ipv6 route X:X::X:X/M X:X::X:X INTERFACE vrf <0-65535>\n+BGP nexthop tracking events\n+no (area-password|domain-password)\n+Negate a command or set its defaults\n+Configure the authentication password for an area\n+Set the authentication password for a routing domain\n+ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole) <1-255>\n IP information\n Establish static routes\n-IPv6 destination prefix (e.g. 3ffe:506::/32)\n-IPv6 gateway address\n-IPv6 gateway interface name\n-Specify the VRF\n-The VRF ID\n-no shutdown\n+IP destination prefix (e.g. 10.0.0.0/8)\n+IP gateway address\n+IP gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Distance value for this route\n+no isis csnp-interval level-1\n Negate a command or set its defaults\n-Shutdown the selected interface\n-ip ospf hello-interval <1-65535>\n-IP Information\n-OSPF interface commands\n-Time between HELLO packets\n-clear ip bgp <1-4294967295> soft\n+IS-IS commands\n+Set CSNP interval in seconds\n+Specify interval for level-1 CSNPs\n+debug ospf nsm (status|events|timers)\n+Debugging functions (see also 'undebug')\n+OSPF information\n+OSPF Neighbor State Machine\n+NSM Status Information\n+NSM Event Information\n+NSM Timer Information\n+no (ip|ipv6) router isis WORD\n+Negate a command or set its defaults\n+Interface Internet Protocol config commands\n+IP router interface commands\n+IS-IS Routing for IP\n+Routing process tag\n+clear bgp * soft out\n Reset functions\n-IP information\n BGP information\n-Clear peers with the AS number\n+Clear all peers\n Soft reconfig inbound and outbound updates\n-no ip community-list standard WORD\n+Resend all outbound updates\n+show ip bgp rsclient summary\n+Show running system information\n+IP information\n+BGP information\n+Information about Route Server Clients\n+Summary of all Route Server Clients\n+no aggregate-address A.B.C.D/M as-set\n+Negate a command or set its defaults\n+Configure BGP aggregate entries\n+Aggregate prefix\n+Generate AS set path information\n+ip ssmpingd [A.B.C.D]\n+IP information\n+Enable ssmpingd operation\n+Source address\n+no ip community-list <1-99> (deny|permit) .AA:NN\n Negate a command or set its defaults\n IP information\n Add a community list entry\n-Add a standard community-list entry\n-Community list name\n-show ip bgp flap-statistics cidr-only\n+Community list number (standard)\n+Specify community to reject\n+Specify community to accept\n+Community number in aa:nn format or internet|local-AS|no-advertise|no-export\n+show bgp ipv6 (unicast|multicast) rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M\n Show running system information\n-IP information\n BGP information\n-Display flap statistics of routes\n-Display only routes with non-natural netmasks\n-clear ip bgp * ipv4 (unicast|multicast) soft\n-Reset functions\n-IP information\n+Address family\n+Address Family modifier\n+Address Family modifier\n+Information about Route Server Client\n+Neighbor address\n+IPv6 address\n+IP prefix /, e.g., 3ffe::/16\n+show bgp ipv6 neighbors\n+Show running system information\n BGP information\n-Clear all peers\n Address family\n-Address Family Modifier\n-Address Family Modifier\n-Soft reconfig inbound and outbound updates\n-show bgp ipv4 (encap|multicast|unicast|vpn) flap-statistics prefix-list WORD\n+Detailed information on TCP and BGP neighbor connections\n+show bgp ipv4 vpn rd ASN:nn_or_IP-address:nn neighbors (A.B.C.D|X:X::X:X) advertised-routes\n Show running system information\n BGP information\n-IP information\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Display flap statistics of routes\n-Display routes conforming to the prefix-list\n-IP prefix-list name\n-isis psnp-interval <1-120> level-2\n-IS-IS commands\n-Set PSNP interval in seconds\n-PSNP interval value\n-Specify interval for level-2 PSNPs\n-show ip ospf database (asbr-summary|external|network|router|summary|nssa-external|opaque-link|opaque-area|opaque-as) A.B.C.D adv-router A.B.C.D\n+Address Family\n+Display VPN NLRI specific information\n+Display information for a route distinguisher\n+VPN Route Distinguisher\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display the routes advertised to a BGP neighbor\n+log-adjacency-changes\n+Log changes in adjacency state\n+show ip ospf database (asbr-summary|external|network|router|summary|nssa-external|opaque-link|opaque-area|opaque-as) adv-router A.B.C.D\n Show running system information\n IP information\n OSPF information\n Database summary\n ASBR summary link states\n External link states\n Network link states\n Router link states\n Network summary link states\n NSSA external link state\n Link local Opaque-LSA\n Link area Opaque-LSA\n Link AS Opaque-LSA\n-Link State ID (as an IP address)\n Advertising Router link states\n Advertising Router (as an IP address)\n-lsp-gen-interval <1-120>\n-Minimum interval between regenerating same LSP\n-Minimum interval in seconds\n-show bgp view WORD ipv6 rsclient (A.B.C.D|X:X::X:X)\n+allow-ecmp\n+Allow Equal Cost MultiPath\n+no isis hello-interval level-1\n+Negate a command or set its defaults\n+IS-IS commands\n+Set Hello interval\n+Specify hello-interval for level-1 IIHs\n+no debug isis route-events\n+Disable debugging functions (see also 'debug')\n+IS-IS information\n+IS-IS Route related events\n+no ip prefix-list WORD description\n+Negate a command or set its defaults\n+IP information\n+Build a prefix list\n+Name of a prefix list\n+Prefix-list specific description\n+show bgp ipv6 (unicast|multicast) rsclient summary\n Show running system information\n BGP information\n-BGP view\n-BGP view name\n-Address Family\n-Information about Route Server Client\n+IPv6 information\n+Address Family modifier\n+Address Family modifier\n+Information about Route Server Clients\n+Summary of all Route Server Clients\n+no ip route A.B.C.D A.B.C.D (reject|blackhole) tag <1-4294967295> <1-255>vrf <0-65535>\n+Negate a command or set its defaults\n+IP information\n+Establish static routes\n+IP destination prefix\n+IP destination prefix mask\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Tag of this route\n+Tag value\n+Distance value for this route\n+Specify the VRF\n+The VRF ID\n+show ip bgp vpnv4 rd ASN:nn_or_IP-address:nn summary\n+Show running system information\n+IP information\n+BGP information\n+Display VPNv4 NLRI specific information\n+Display information for a route distinguisher\n+VPN Route Distinguisher\n+Summary of BGP neighbor status\n+no neighbor (A.B.C.D|X:X::X:X|WORD) disable-connected-check\n+Negate a command or set its defaults\n+Specify neighbor router\n Neighbor address\n Neighbor IPv6 address\n Neighbor tag\n-no isis network point-to-point\n-Negate a command or set its defaults\n-IS-IS commands\n-Set network type for circuit\n-point-to-point network type\n-ipv6 ospf6 dead-interval <1-65535>\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Interval time after which a neighbor is declared down\n-<1-65535> Seconds\n-no match extcommunity\n-Negate a command or set its defaults\n-Match values from routing table\n-Match BGP/VPN extended community list\n-debug ospf ism (status|events|timers)\n-Debugging functions (see also 'undebug')\n-OSPF information\n-OSPF Interface State Machine\n-ISM Status Information\n-ISM Event Information\n-ISM TImer Information\n-show ip bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n+one-hop away EBGP peer using loopback address\n+show ip bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n Show running system information\n IP information\n BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-show bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n+no neighbor\n+Negate a command or set its defaults\n+Remove Neighbor IP address and AS number for Inter-AS TE\n+show bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n Show running system information\n BGP information\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n@@ -3076,2894 +3116,2145 @@\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-show ip bgp vpnv4 all A.B.C.D/M\n+Exact match of the communities\n+show ipv6 route tag <1-4294967295>vrf <0-65535>\n Show running system information\n IP information\n-BGP information\n-Display VPNv4 NLRI specific information\n-Display information about all VPNv4 NLRIs\n-IP prefix /, e.g., 35.0.0.0/8\n-show bgp views\n-Show running system information\n-BGP information\n-Show the defined BGP views\n-no isis hello-multiplier\n-Negate a command or set its defaults\n-IS-IS commands\n-Set multiplier for Hello holding time\n-ipv6 nd ra-lifetime <0-9000>\n-Interface IPv6 config commands\n-Neighbor discovery\n-Router lifetime\n-Router lifetime in seconds (0 stands for a non-default gw)\n-show bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n-Show running system information\n-BGP information\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-show bgp ipv4 large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n+IPv6 routing table\n+Show only routes with tag\n+Tag value\n+Specify the VRF\n+The VRF ID\n+distance ospf6 inter-area <1-255> external <1-255> intra-area <1-255>\n+Define an administrative distance\n+OSPF6 Administrative distance\n+Inter-area routes\n+Distance for inter-area routes\n+External routes\n+Distance for external routes\n+Intra-area routes\n+Distance for intra-area routes\n+show ip nht\n Show running system information\n-BGP information\n IP information\n-Display routes matching the large-communities\n-large-community number\n-large-community number\n-large-community number\n-show bgp view WORD (ipv4|ipv6) (unicast|multicast) large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n-Show running system information\n-BGP information\n-BGP view\n-View name\n-Address family\n-Address family\n-Address family modifier\n-Address family modifier\n-Display routes matching the large-communities\n-large-community number\n-large-community number\n-large-community number\n-large-community number\n-no debug ospf6 abr\n+IP nexthop tracking table\n+no redistribute (kernel|connected|static|ospf6|isis|bgp|babel|nhrp) metric <0-16> route-map WORD\n+no debug pim\n Negate a command or set its defaults\n Debugging functions (see also 'undebug')\n-Open Shortest Path First (OSPF) for IPv6\n-Debug OSPFv3 ABR function\n-bgp dampening\n-BGP Specific commands\n-Enable route-flap dampening\n-show ip large-community-list (<1-500>|WORD)\n-Show running system information\n+PIM protocol activity\n+no ip as-path access-list WORD\n+Negate a command or set its defaults\n IP information\n-List large-community list\n-large-community-list number\n-large-community-list name\n-clear bgp peer-group WORD out\n-Reset functions\n-BGP information\n-Clear all members of peer-group\n-BGP peer-group name\n-Resend all outbound updates\n-no set tag <1-4294967295>\n+BGP autonomous system path filter\n+Specify an access list name\n+Regular expression access list name\n+ipv6 nd other-config-flag\n+Interface IPv6 config commands\n+Neighbor discovery\n+Other statefull configuration flag\n+no neighbor (A.B.C.D|X:X::X:X) strict-capability-match\n+Negate a command or set its defaults\n+Specify neighbor router\n+Neighbor address\n+IPv6 address\n+Strict capability negotiation match\n+spf-interval <1-120>\n+Minimum interval between SPF calculations\n+Minimum interval between consecutive SPFs in seconds\n+delay <0-16777215>\n+Unidirectional Average Link Delay\n+Average delay in micro-second as decimal (0...16777215)\n+no match large-community (<1-99>|<100-500>|WORD)\n+Negate a command or set its defaults\n+Match values from routing table\n+Match BGP large community list\n+Large Community-list number (standard)\n+Large Community-list number (expanded)\n+Large Community-list name\n+no bgp fast-external-failover\n Negate a command or set its defaults\n-Set values in destination routing protocol\n-Tag value for routing protocol\n-Tag value\n-show bgp prefix-list WORD\n-Show running system information\n BGP information\n-Display routes conforming to the prefix-list\n-IPv6 prefix-list name\n-show ip ospf neighbor detail all\n-Show running system information\n+Immediately reset session if a link to a directly connected external peer goes down\n+ip route A.B.C.D/M (A.B.C.D|INTERFACE|null0)\n IP information\n-OSPF information\n-Neighbor list\n-detail of all neighbors\n-include down status neighbor\n-no ip ospf authentication-key\n+Establish static routes\n+IP destination prefix (e.g. 10.0.0.0/8)\n+IP gateway address\n+IP gateway interface name\n+Null interface\n+no on-match next\n+Negate a command or set its defaults\n+Exit policy on matches\n+Next clause\n+no ip ospf dead-interval <1-65535> A.B.C.D\n Negate a command or set its defaults\n IP Information\n OSPF interface commands\n-Authentication password (key)\n-show bgp ipv6 (encap|multicast|unicast|vpn) neighbors (A.B.C.D|X:X::X:X) received-routes\n+Interval after which a neighbor is declared dead\n+Address of interface\n+no neighbor (A.B.C.D|X:X::X:X|WORD) unsuppress-map WORD\n+Negate a command or set its defaults\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Route-map to selectively unsuppress suppressed routes\n+Name of route map\n+version <1-2>\n+Set routing protocol version\n+no ipv6 ospf6 passive\n+Negate a command or set its defaults\n+IPv6 Information\n+Open Shortest Path First (OSPF) for IPv6\n+passive interface: No Adjacency will be formed on this I/F\n+show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) self-originated linkstate-id A.B.C.D (detail|dump|internal)\n+Show running system information\n+IPv6 information\n+Open Shortest Path First (OSPF) for IPv6\n+Display Link state database\n+Display Router LSAs\n+Display Network LSAs\n+Display Inter-Area-Prefix LSAs\n+Display Inter-Area-Router LSAs\n+Display As-External LSAs\n+Display Group-Membership LSAs\n+Display Type-7 LSAs\n+Display Link LSAs\n+Display Intra-Area-Prefix LSAs\n+Display Self-originated LSAs\n+Search by Link state ID\n+Specify Link state ID as IPv4 address notation\n+Display details of LSAs\n+Dump LSAs\n+Display LSA's internal information\n+no neighbor (A.B.C.D|X:X::X:X|WORD) advertisement-interval\n+Negate a command or set its defaults\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Minimum interval between sending BGP routing updates\n+no ava-bw\n+Negate a command or set its defaults\n+Disable Unidirectional Available Bandwidth on this interface\n+debug nhrp (all|common|event|interface|kernel|route|vici)\n+Enable debug messages for specific or all parts.\n+NHRP information\n+All messages\n+Common messages (default)\n+Event manager messages\n+Interface messages\n+Kernel messages\n+Route messages\n+VICI messages\n+show bgp ipv4 (encap|multicast|unicast|vpn) flap-statistics A.B.C.D/M longer-prefixes\n Show running system information\n BGP information\n Address family\n Address Family modifier\n Address Family modifier\n Address Family modifier\n Address Family modifier\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display the received routes from neighbor\n-show ipv6 ospf6 route X:X::X:X/M match\n+Display flap statistics of routes\n+IP prefix /, e.g., 35.0.0.0/8\n+Display route and more specific routes\n+show bgp ipv4 large-community (AA:BB:CC) (AA:BB:CC)\n Show running system information\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Routing Table\n-Specify IPv6 prefix\n-Display routes which match the specified route\n-no ip prefix-list WORD (deny|permit) A.B.C.D/M le <0-32> ge <0-32>\n-Negate a command or set its defaults\n+BGP information\n IP information\n-Build a prefix list\n-Name of a prefix list\n-Specify packets to reject\n-Specify packets to forward\n-IP prefix /, e.g., 35.0.0.0/8\n-Maximum prefix length to be matched\n-Maximum prefix length\n-Minimum prefix length to be matched\n-Minimum prefix length\n-show ip route A.B.C.D vrf <0-65535>\n+Display routes matching the large-communities\n+large-community number\n+large-community number\n+show ip bgp vpnv4 all summary\n Show running system information\n IP information\n-IP routing table\n-Network in the IP routing table to display\n-Specify the VRF\n-The VRF ID\n-show ip bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n+BGP information\n+Display VPNv4 NLRI specific information\n+Display information about all VPNv4 NLRIs\n+Summary of BGP neighbor status\n+show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) linkstate-id A.B.C.D\n Show running system information\n+IPv6 information\n+Open Shortest Path First (OSPF) for IPv6\n+Display Link state database\n+Display Router LSAs\n+Display Network LSAs\n+Display Inter-Area-Prefix LSAs\n+Display Inter-Area-Router LSAs\n+Display As-External LSAs\n+Display Group-Membership LSAs\n+Display Type-7 LSAs\n+Display Link LSAs\n+Display Intra-Area-Prefix LSAs\n+Search by Link state ID\n+Specify Link state ID as IPv4 address notation\n+no debug ospf nsm (status|events|timers)\n+Negate a command or set its defaults\n+Debugging functions\n+OSPF information\n+OSPF Interface State Machine\n+NSM Status Information\n+NSM Event Information\n+NSM Timer Information\n+distance bgp <1-255> <1-255> <1-255>\n+Define an administrative distance\n+BGP distance\n+Distance for routes external to the AS\n+Distance for routes internal to the AS\n+Distance for local routes\n+no ip extcommunity-list standard WORD\n+Negate a command or set its defaults\n IP information\n+Add a extended community list entry\n+Specify standard extcommunity-list\n+Extended Community list name\n+no match as-path\n+Negate a command or set its defaults\n+Match values from routing table\n+Match BGP AS path list\n+no router-info\n+Negate a command or set its defaults\n+Disable the Router Information functionality\n+show bgp views\n+Show running system information\n+BGP information\n+Show the defined BGP views\n+show bgp ipv6 community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n+Show running system information\n BGP information\n Address family\n-Address Family modifier\n-Address Family modifier\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-no distance ospf6\n+no isis hello-interval level-2\n Negate a command or set its defaults\n-Define an administrative distance\n-OSPF6 Administrative distance\n-OSPF6 Distance\n-no ospf rfc1583compatibility\n+IS-IS commands\n+Set Hello interval\n+Specify hello-interval for level-2 IIHs\n+default-information originate\n+Control distribution of default route\n+Distribute a default route\n Negate a command or set its defaults\n-OSPF specific commands\n-Disable the RFC1583Compatibility flag\n-show ip bgp large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n+Administrative distance\n+Distance value\n+IP source prefix\n+Access list name\n+show ipv6 prefix-list WORD\n Show running system information\n-IP information\n-BGP information\n-Display routes matching the large-communities\n-large-community number\n-large-community number\n-large-community number\n-large-community number\n-show ip bgp view WORD ipv4 (unicast|multicast) summary\n+IPv6 information\n+Build a prefix list\n+Name of a prefix list\n+show ip igmp groups\n Show running system information\n IP information\n-BGP information\n-BGP view\n-View name\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Summary of BGP neighbor status\n-show bgp ipv6 vpn summary\n-Show running system information\n-BGP information\n-Display VPN NLRI specific information\n-Summary of BGP neighbor status\n-no bgp confederation identifier <1-4294967295>\n-Negate a command or set its defaults\n-BGP specific commands\n-AS confederation parameters\n-AS number\n-Set routing domain confederation AS\n-show ip bgp ipv4 (unicast|multicast) rsclient summary\n-Show running system information\n-IP information\n-BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Information about Route Server Clients\n-Summary of all Route Server Clients\n-no default-metric\n-area (A.B.C.D|<0-4294967295>) shortcut (default|enable|disable)\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Configure the area's shortcutting mode\n-Set default shortcutting behavior\n-Enable shortcutting through the area\n-Disable shortcutting through the area\n-clear bgp view WORD (A.B.C.D|X:X::X:X) rsclient\n-Reset functions\n-BGP information\n-BGP view\n-view name\n-BGP neighbor IP address to clear\n-BGP IPv6 neighbor to clear\n-Soft reconfig for rsclient RIB\n-ip irdp address A.B.C.D preference <0-2147483647>\n-IP information\n-Alter ICMP Router discovery preference this interface\n-Specify IRDP non-default preference to advertise\n-Set IRDP address for advertise\n-Preference level\n-distance <1-255> X:X::X:X/M\n-Administrative distance\n-Distance value\n-IP source prefix\n-undebug bgp as4\n-Disable debugging functions (see also 'debug')\n-BGP information\n-BGP AS4 actions\n-neighbor (A.B.C.D|X:X::X:X|WORD) allowas-in <1-10>\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Accept as-path with my AS present in it\n-Number of occurrences of AS number\n-isis hello padding\n-IS-IS commands\n-Add padding to IS-IS hello packets\n-Pad hello packets\n-show ip prefix-list WORD\n-Show running system information\n-IP information\n-Build a prefix list\n-Name of a prefix list\n-clear isis neighbor WORD\n-Reset functions\n-ISIS network information\n-ISIS neighbor adjacencies\n-System id\n-ip irdp debug packet\n-IP information\n-ICMP Router discovery debug Averts. and Solicits (short)\n-show isis interface WORD\n-Show running system information\n-ISIS network information\n-ISIS interface\n-ISIS interface name\n-ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) (reject|blackhole)\n+IGMP information\n+IGMP groups information\n+match peer (A.B.C.D|X:X::X:X)\n+Match values from routing table\n+Match peer address\n+IP address of peer\n+IPv6 address of peer\n+ip route A.B.C.D/M (reject|blackhole) tag <1-4294967295>\n IP information\n Establish static routes\n-IPv6 destination prefix (e.g. 3ffe:506::/32)\n-IPv6 gateway address\n-IPv6 gateway interface name\n+IP destination prefix (e.g. 10.0.0.0/8)\n Emit an ICMP unreachable when matched\n Silently discard pkts when matched\n-no vrf <1-65535> netns NAME\n+Set tag for this route\n+Tag value\n+Specify the VRF\n+The VRF ID\n+no ip rip send version\n Negate a command or set its defaults\n-Enable a VRF\n-Specify the VRF identifier\n-Associate with a NETNS\n-The file name in /var/run/netns, or a full pathname\n-show bgp large-community (AA:BB:CC) (AA:BB:CC)\n-Show running system information\n-BGP information\n-Display routes matching the large-communities\n-large-community number\n-large-community number\n-no match ipv6 address\n+IP information\n+Routing Information Protocol\n+Advertisement transmission\n+Version control\n+no ip extcommunity-list <100-500>\n Negate a command or set its defaults\n-Match values from routing table\n-IPv6 information\n-Match IPv6 address of route\n-show ipv6 ripng status\n-Show running system information\n-IPv6 information\n-Show RIPng routes\n-IPv6 routing protocol process parameters and statistics\n-area (A.B.C.D|<0-4294967295>) filter-list prefix WORD (in|out)\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Filter networks between OSPF areas\n-Filter prefixes between OSPF areas\n-Name of an IP prefix-list\n-Filter networks sent to this area\n-Filter networks sent from this area\n-no neighbor (A.B.C.D|X:X::X:X|WORD) unsuppress-map WORD\n+IP information\n+Add a extended community list entry\n+Extended Community list number (expanded)\n+no ip community-list standard WORD (deny|permit) .AA:NN\n+Negate a command or set its defaults\n+IP information\n+Add a community list entry\n+Specify a standard community-list\n+Community list name\n+Specify community to reject\n+Specify community to accept\n+Community number in aa:nn format or internet|local-AS|no-advertise|no-export\n+isis hello-multiplier <2-100> level-1\n+IS-IS commands\n+Set multiplier for Hello holding time\n+Hello multiplier value\n+Specify hello multiplier for level-1 IIHs\n+no neighbor (A.B.C.D|X:X::X:X) remote-as <1-4294967295>\n Negate a command or set its defaults\n Specify neighbor router\n Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Route-map to selectively unsuppress suppressed routes\n-Name of route map\n-no area (A.B.C.D|<0-4294967295>) range A.B.C.D/M substitute A.B.C.D/M\n-Negate a command or set its defaults\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Summarize routes matching address/mask (border routers only)\n-Area range prefix\n-Announce area range as another prefix\n-Network prefix to be announced instead of range\n-show bgp community (AA:NN|local-AS|no-advertise|no-export)\n+IPv6 address\n+Specify a BGP neighbor\n+AS number\n+show bgp ipv6 encap neighbors A.B.C.D routes\n Show running system information\n BGP information\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-no ipv6 ospf6 advertise prefix-list\n-Negate a command or set its defaults\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Advertising options\n-Filter prefix using prefix-list\n-clear bgp * soft\n-Reset functions\n-BGP information\n-Clear all peers\n-Soft reconfig inbound and outbound updates\n-no ip address A.B.C.D/M\n-Negate a command or set its defaults\n-Interface Internet Protocol config commands\n-Set the IP address of an interface\n-IP Address (e.g. 10.0.0.1/8)\n-ip prefix-list sequence-number\n-IP information\n+Address Family\n+Display ENCAP NLRI specific information\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Display routes learned from neighbor\n+ipv6 prefix-list WORD seq <1-4294967295> (deny|permit) X:X::X:X/M le <0-128> ge <0-128>\n+IPv6 information\n Build a prefix list\n-Include/exclude sequence numbers in NVGEN\n-no access-list (<100-199>|<2000-2699>) (deny|permit) ip any host A.B.C.D\n-Negate a command or set its defaults\n-Add an access list entry\n-IP extended access list\n-IP extended access list (expanded range)\n+Name of a prefix list\n+sequence number of an entry\n+Sequence number\n Specify packets to reject\n Specify packets to forward\n-Any Internet Protocol\n-Any source host\n-A single destination host\n-Destination address\n-no access-list (<1-99>|<1300-1999>) (deny|permit) A.B.C.D A.B.C.D\n+IPv6 prefix /, e.g., 3ffe::/16\n+Maximum prefix length to be matched\n+Maximum prefix length\n+Minimum prefix length to be matched\n+Minimum prefix length\n+no isis hello-multiplier level-2\n Negate a command or set its defaults\n-Add an access list entry\n-IP standard access list\n-IP standard access list (expanded range)\n-Specify packets to reject\n-Specify packets to forward\n-Address to match\n-Wildcard bits\n-distance ospf6 external <1-255> intra-area <1-255>\n-Define an administrative distance\n-OSPF6 Administrative distance\n-External routes\n-Distance for external routes\n-Intra-area routes\n-Distance for intra-area routes\n-show bgp community-list (<1-500>|WORD)\n-Show running system information\n-BGP information\n-Display routes matching the community-list\n-community-list number\n-community-list name\n-show bgp memory\n-Show running system information\n-BGP information\n-Global BGP memory statistics\n-clear ip bgp A.B.C.D soft\n-Reset functions\n+IS-IS commands\n+Set multiplier for Hello holding time\n+Specify hello multiplier for level-2 IIHs\n+no match ip route-source (<1-199>|<1300-2699>|WORD)\n+Negate a command or set its defaults\n+Match values from routing table\n IP information\n-BGP information\n-BGP neighbor address to clear\n-Soft reconfig inbound and outbound updates\n-show ip bgp ipv4 (unicast|multicast) A.B.C.D/M (bestpath|multipath)\n+Match advertising source address of route\n+IP access-list number\n+IP access-list number (expanded range)\n+IP standard access-list name\n+show ip bgp vpnv4 all neighbors A.B.C.D\n Show running system information\n IP information\n BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-IP prefix /, e.g., 35.0.0.0/8\n-Display only the bestpath\n-Display only multipaths\n-distance ospf6 intra-area <1-255> inter-area <1-255> external <1-255>\n-Define an administrative distance\n-OSPF6 Administrative distance\n-Intra-area routes\n-Distance for intra-area routes\n-Inter-area routes\n-Distance for inter-area routes\n-External routes\n-Distance for external routes\n-no ip igmp\n-Negate a command or set its defaults\n-IP information\n-Enable IGMP operation\n-no router ospf6\n-Negate a command or set its defaults\n-Enable a routing process\n-show ip route A.B.C.D/M vrf all\n+Display VPNv4 NLRI specific information\n+Display information about all VPNv4 NLRIs\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+show ip ospf neighbor A.B.C.D\n Show running system information\n IP information\n-IP routing table\n-IP prefix /, e.g., 35.0.0.0/8\n-Specify the VRF\n-All VRFs\n-access-list (<1-99>|<100-199>|<1300-1999>|<2000-2699>|WORD) remark .LINE\n-Add an access list entry\n-IP standard access list\n-IP extended access list\n-IP standard access list (expanded range)\n-IP extended access list (expanded range)\n-IP zebra access-list\n-Access list entry comment\n-Comment up to 100 characters\n-show bgp ipv4 large-community (AA:BB:CC) (AA:BB:CC)\n+OSPF information\n+Neighbor list\n+Neighbor ID\n+show bgp ipv4 vpn summary\n Show running system information\n BGP information\n-IP information\n-Display routes matching the large-communities\n-large-community number\n-large-community number\n-no ospf dead-interval\n-Negate a command or set its defaults\n-OSPF interface commands\n-Interval after which a neighbor is declared dead\n-no ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole) vrf <0-65535>\n-Negate a command or set its defaults\n-IP information\n-Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n-IP gateway address\n-IP gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Specify the VRF\n-The VRF ID\n-no debug ospf6 message (unknown|hello|dbdesc|lsreq|lsupdate|lsack|all)\n+Display VPN NLRI specific information\n+Summary of BGP neighbor status\n+no debug nhrp (all|common|event|interface|kernel|route|vici)\n Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-Open Shortest Path First (OSPF) for IPv6\n-Debug OSPFv3 message\n-Debug Unknown message\n-Debug Hello message\n-Debug Database Description message\n-Debug Link State Request message\n-Debug Link State Update message\n-Debug Link State Acknowledgement message\n-Debug All message\n-no set aggregator as\n+Disable debug messages for specific or all parts.\n+NHRP information\n+All messages\n+Common messages (default)\n+Event manager messages\n+Interface messages\n+Kernel messages\n+Route messages\n+VICI messages\n+no bgp graceful-restart restart-time <1-3600>\n Negate a command or set its defaults\n-Set values in destination routing protocol\n-BGP aggregator attribute\n-AS number of aggregator\n-show bgp view WORD ipv6 (unicast|multicast) rsclient summary\n+BGP specific commands\n+Graceful restart capability parameters\n+Set the time to wait to delete stale routes before a BGP open message is received\n+Delay value (seconds)\n+show bgp view WORD (ipv4|ipv6) (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n Show running system information\n BGP information\n BGP view\n View name\n Address family\n-Address Family modifier\n-Address Family modifier\n-Information about Route Server Clients\n-Summary of all Route Server Clients\n-no ip ospf message-digest-key <1-255>\n-Negate a command or set its defaults\n-IP Information\n-OSPF interface commands\n-Message digest authentication password (key)\n-debug ospf6 flooding\n-Debugging functions (see also 'undebug')\n-Open Shortest Path First (OSPF) for IPv6\n-Debug OSPFv3 flooding function\n-show ipv6 bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n-Show running system information\n-IPv6 information\n-BGP information\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-Exact match of the communities\n-no on-match next\n-Negate a command or set its defaults\n-Exit policy on matches\n-Next clause\n-accept-lifetime HH:MM:SS <1-31> MONTH <1993-2035> HH:MM:SS MONTH <1-31> <1993-2035>\n-Set accept lifetime of the key\n-Time to start\n-Day of th month to start\n-Month of the year to start\n-Year to start\n-Time to expire\n-Month of the year to expire\n-Day of th month to expire\n-Year to expire\n-show ip bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n-Show running system information\n-IP information\n-BGP information\n Address family\n-Address Family modifier\n-Address Family modifier\n+Address family modifier\n+Address family modifier\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-Exact match of the communities\n-no isis hello-interval <1-600>\n-Negate a command or set its defaults\n-IS-IS commands\n-Set Hello interval\n-Hello interval value\n-Holdtime 1 second, interval depends on multiplier\n-clear ip bgp A.B.C.D ipv4 (unicast|multicast) soft\n-Reset functions\n-IP information\n-BGP information\n-BGP neighbor address to clear\n-Address family\n-Address Family Modifier\n-Address Family Modifier\n-Soft reconfig inbound and outbound updates\n-ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole) tag <1-4294967295>\n-IP information\n-Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n-IP gateway address\n-IP gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Set tag for this route\n-Tag value\n-match tag <1-4294967295>\n-Match values from routing table\n-Match tag of route\n-Metric value\n-clear bgp external soft out\n+clear bgp <1-4294967295> soft out\n Reset functions\n BGP information\n-Clear all external peers\n+Clear peers with the AS number\n Soft reconfig inbound and outbound updates\n Resend all outbound updates\n-no isis priority level-2\n-Negate a command or set its defaults\n-IS-IS commands\n-Set priority for Designated Router election\n-Specify priority for level-2 routing\n-neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged med (as-path|next-hop)\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-BGP attribute is propagated unchanged to this neighbor\n-Med attribute\n-As-path attribute\n-Nexthop attribute\n-area A.B.C.D import-list NAME\n-OSPFv6 area parameters\n-OSPFv6 area ID in IP address format\n-Set the filter for networks from other areas announced to the specified one\n-Name of the acess-list\n-no ip large-community-list standard WORD\n-Negate a command or set its defaults\n+show bgp summary\n+Show running system information\n+BGP information\n+Summary of BGP neighbor status\n+ip pim drpriority <1-4294967295>\n IP information\n-Add a large community list entry\n-Specify standard large-community-list\n-Large Community list name\n-ipv6 nd ra-interval msec <70-1800000>\n+PIM information\n+Set the Designated Router Election Priority\n+Value of the new DR Priority\n+mpls-te router-address A.B.C.D\n+MPLS-TE specific commands\n+Stable IP address of the advertising router\n+MPLS-TE router address in IPv4 address format\n+no ipv6 address X:X::X:X/M\n+Negate a command or set its defaults\n Interface IPv6 config commands\n-Neighbor discovery\n-Router Advertisement interval\n-Router Advertisement interval in milliseconds\n-no match ip next-hop (<1-199>|<1300-2699>|WORD)\n+Set the IP address of an interface\n+IPv6 address (e.g. 3ffe:506::1/48)\n+access-list (<1-99>|<1300-1999>) (deny|permit) any\n+Add an access list entry\n+IP standard access list\n+IP standard access list (expanded range)\n+Specify packets to reject\n+Specify packets to forward\n+Any source host\n+Route-map comment\n+Comment describing this route-map rule\n+no match ip next-hop prefix-list\n Negate a command or set its defaults\n Match values from routing table\n IP information\n Match next-hop address of route\n-IP access-list number\n-IP access-list number (expanded range)\n-IP Access-list name\n-debug ospf zebra\n-Debugging functions (see also 'undebug')\n-OSPF information\n-OSPF Zebra information\n-ipv6 nd prefix X:X::X:X/M (no-autoconfig|)\n-Interface IPv6 config commands\n-Neighbor discovery\n-Prefix information\n-IPv6 prefix\n-Do not use prefix for autoconfiguration\n-clear bgp ipv6 peer-group WORD in prefix-filter\n-Reset functions\n-BGP information\n-Address family\n-Clear all members of peer-group\n-BGP peer-group name\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-Push out prefix-list ORF and do inbound soft reconfig\n-no ospf cost <1-65535> A.B.C.D\n-Negate a command or set its defaults\n-OSPF interface commands\n-Interface cost\n-Address of interface\n-no bgp default local-preference\n+Match entries of prefix-lists\n+no bgp network import-check\n Negate a command or set its defaults\n BGP specific commands\n-Configure BGP defaults\n-local preference (higher=more preferred)\n-ip irdp multicast\n+BGP network command\n+Check BGP network route exists in IGP\n+show bgp ipv6 encap\n+Show running system information\n+BGP information\n+Address Family\n+Display ENCAP NLRI specific information\n+no ipv6 route X:X::X:X/M X:X::X:X INTERFACE (reject|blackhole) <1-255> vrf <0-65535>\n+Negate a command or set its defaults\n IP information\n-ICMP Router discovery on this interface using multicast\n-access-class WORD\n-Filter connections based on an IP access list\n-IP access list\n-show ip bgp ipv4 (unicast|multicast) large-community-list (<1-500>|WORD)\n+Establish static routes\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Distance value for this prefix\n+Specify the VRF\n+The VRF ID\n+show ip prefix-list WORD A.B.C.D/M\n Show running system information\n IP information\n+Build a prefix list\n+Name of a prefix list\n+IP prefix /, e.g., 35.0.0.0/8\n+show bgp ipv6 vpn rd ASN:nn_or_IP-address:nn\n+Show running system information\n BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Display routes matching the large-community-list\n-large-community-list number\n-large-community-list name\n-no set src\n+Address Family\n+Display VPN NLRI specific information\n+Display information for a route distinguisher\n+VPN Route Distinguisher\n+no debug igmp packets\n Negate a command or set its defaults\n-Set values in destination routing protocol\n-Source address for route\n-no maximum-paths <1-1>\n+Debugging functions (see also 'undebug')\n+IGMP protocol activity\n+IGMP protocol packets\n+no set large-community none\n Negate a command or set its defaults\n-Forward packets over multiple paths\n-Number of paths\n-show ipv6 bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n-Show running system information\n+Set values in destination routing protocol\n+BGP community attribute\n+No community attribute\n+ipv6 ripng split-horizon\n IPv6 information\n+Routing Information Protocol\n+Perform split horizon\n+access-list (<1-99>|<1300-1999>) (deny|permit) A.B.C.D A.B.C.D\n+Add an access list entry\n+IP standard access list\n+IP standard access list (expanded range)\n+Specify packets to reject\n+Specify packets to forward\n+Address to match\n+Wildcard bits\n+show interface IFNAME vrf all\n+Show running system information\n+Interface status and configuration\n+Interface name\n+Specify the VRF\n+All VRFs\n+Set multicast flag to interface\n+area A.B.C.D filter-list prefix WORD (in|out)\n+OSPFv6 area parameters\n+OSPFv6 area ID in IP address format\n+Filter networks between OSPFv6 areas\n+Filter prefixes between OSPFv6 areas\n+Name of an IPv6 prefix-list\n+Filter networks sent to this area\n+Filter networks sent from this area\n+ipv6 nd adv-interval-option\n+Interface IPv6 config commands\n+Neighbor discovery\n+Advertisement Interval Option\n+show ip community-list\n+Show running system information\n+IP information\n+List community-list\n+show bgp view WORD (ipv4|ipv6) (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n+Show running system information\n BGP information\n+BGP view\n+View name\n+Address family\n+Address family\n+Address family modifier\n+Address family modifier\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-no area (A.B.C.D|<0-4294967295>) export-list NAME\n-Negate a command or set its defaults\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Unset the filter for networks announced to other areas\n-Name of the access-list\n-no bgp always-compare-med\n-Negate a command or set its defaults\n-BGP specific commands\n-Allow comparing MED from different neighbors\n-ipv6 nd ra-interval <1-1800>\n-Interface IPv6 config commands\n-Neighbor discovery\n-Router Advertisement interval\n-Router Advertisement interval in seconds\n-show ip bgp vpnv4 all neighbors A.B.C.D\n-Show running system information\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+ip as-path access-list WORD (deny|permit) .LINE\n IP information\n-BGP information\n-Display VPNv4 NLRI specific information\n-Display information about all VPNv4 NLRIs\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-debug ospf6 spf process\n-Debugging functions (see also 'undebug')\n-Open Shortest Path First (OSPF) for IPv6\n-Debug SPF Calculation\n-Debug Detailed SPF Process\n-clear bgp ipv6 (A.B.C.D|X:X::X:X) soft out\n-Reset functions\n-BGP information\n-Address family\n-BGP neighbor address to clear\n-BGP IPv6 neighbor to clear\n-Soft reconfig inbound and outbound updates\n-Resend all outbound updates\n-no access-list (<100-199>|<2000-2699>) (deny|permit) ip any any\n-Negate a command or set its defaults\n-Add an access list entry\n-IP extended access list\n-IP extended access list (expanded range)\n+BGP autonomous system path filter\n+Specify an access list name\n+Regular expression access list name\n Specify packets to reject\n Specify packets to forward\n-Any Internet Protocol\n-Any source host\n-Any destination host\n-show ip ospf router-info pce\n-Show running system information\n-IP information\n-OSPF information\n-Router Information\n-PCE information\n-no isis priority level-1\n+A regular-expression to match the BGP AS paths\n+passive-interface default\n+Suppress routing updates on an interface\n+Suppress routing updates on interfaces by default\n+no ip prefix-list WORD seq <1-4294967295> (deny|permit) A.B.C.D/M le <0-32>\n Negate a command or set its defaults\n-IS-IS commands\n-Set priority for Designated Router election\n-Specify priority for level-1 routing\n-ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole) <1-255>\n IP information\n-Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n-IP gateway address\n-IP gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Distance value for this route\n-no route-map WORD (deny|permit) <1-65535>\n-Negate a command or set its defaults\n-Create route-map or enter route-map command mode\n-Route map tag\n-Route map denies set operations\n-Route map permits set operations\n-Sequence to insert to/delete from existing route-map entry\n-ipv6 prefix-list WORD (deny|permit) X:X::X:X/M le <0-128> ge <0-128>\n-IPv6 information\n Build a prefix list\n Name of a prefix list\n+sequence number of an entry\n+Sequence number\n Specify packets to reject\n Specify packets to forward\n-IPv6 prefix /, e.g., 3ffe::/16\n+IP prefix /, e.g., 35.0.0.0/8\n Maximum prefix length to be matched\n Maximum prefix length\n-Minimum prefix length to be matched\n-Minimum prefix length\n-show ip route vrf all\n+ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) (reject|blackhole) tag <1-4294967295> <1-255>\n+IP information\n+Establish static routes\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Set tag for this route\n+Tag value\n+Distance value for this prefix\n+show ip bgp neighbors (A.B.C.D|X:X::X:X) flap-statistics\n Show running system information\n IP information\n-IP routing table\n-Specify the VRF\n-All VRFs\n-ipv6 ospf6 priority <0-255>\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Router priority\n-Priority value\n-no distance <1-255> A.B.C.D/M WORD\n+BGP information\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display flap statistics of the routes learned from neighbor\n+no set vpnv4 next-hop\n Negate a command or set its defaults\n-Define an administrative distance\n-Administrative distance\n-IP source prefix\n-Access list name\n-ipv6 prefix-list WORD seq <1-4294967295> (deny|permit) X:X::X:X/M le <0-128>\n-IPv6 information\n-Build a prefix list\n-Name of a prefix list\n-sequence number of an entry\n-Sequence number\n-Specify packets to reject\n-Specify packets to forward\n-IPv6 prefix /, e.g., 3ffe::/16\n-Maximum prefix length to be matched\n-Maximum prefix length\n-bgp dampening <1-45>\n-BGP Specific commands\n-Enable route-flap dampening\n-Half-life time for the penalty\n-no set large-comm-list\n+Set values in destination routing protocol\n+VPNv4 information\n+VPNv4 next-hop address\n+clear ip bgp * vpnv4 unicast out\n+Reset functions\n+IP information\n+BGP information\n+Clear all peers\n+Address family\n+Address Family Modifier\n+Resend all outbound updates\n+no set metric-type\n Negate a command or set its defaults\n Set values in destination routing protocol\n-set BGP large community list (for deletion)\n-no debug ripng packet (recv|send)\n+Type of metric for destination routing protocol\n+no ip rip authentication mode\n Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-RIPng configuration\n-Debug option set for ripng packet\n-Debug option set for receive packet\n-Debug option set for send packet\n-show ip bgp community (AA:NN|local-AS|no-advertise|no-export)\n-Show running system information\n IP information\n-BGP information\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) vrf <0-65535>\n-no neighbor (A.B.C.D|X:X::X:X|WORD) ebgp-multihop <1-255>\n+Routing Information Protocol\n+Authentication control\n+Authentication mode\n+no neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged med as-path next-hop\n Negate a command or set its defaults\n Specify neighbor router\n Neighbor address\n Neighbor IPv6 address\n Neighbor tag\n-Allow EBGP neighbors not on directly connected networks\n-maximum hop count\n-neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged as-path (next-hop|med)\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n BGP attribute is propagated unchanged to this neighbor\n+Med attribute\n As-path attribute\n Nexthop attribute\n-Med attribute\n-ip route A.B.C.D/M (reject|blackhole) tag <1-4294967295> <1-255>\n+ip igmp query-max-response-time <1-25>\n+IP information\n+Enable IGMP operation\n+IGMP max query response value (seconds)\n+Query response value in seconds\n+timers throttle spf <0-600000> <0-600000> <0-600000>\n+Adjust routing timers\n+Throttling adaptive timer\n+OSPF6 SPF timers\n+Delay (msec) from first change received till SPF calculation\n+Initial hold time (msec) between consecutive SPF calculations\n+Maximum hold time (msec)\n+show isis summary\n+Show running system information\n+IS-IS information\n+IS-IS summary\n+offset-list WORD (in|out) <0-16>\n+Modify RIP metric\n+Access-list name\n+For incoming updates\n+For outgoing updates\n+Metric value\n+tunnel protection vici profile PROFILE {fallback-profile FALLBACK}\n+NHRP/GRE integration\n+IPsec protection\n+VICI (StrongSwan)\n+IPsec profile\n+IPsec profile name\n+Fallback IPsec profile\n+Fallback IPsec profile name\n+no ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole) <1-255>\n+Negate a command or set its defaults\n IP information\n Establish static routes\n IP destination prefix (e.g. 10.0.0.0/8)\n+IP gateway address\n+IP gateway interface name\n Emit an ICMP unreachable when matched\n Silently discard pkts when matched\n-Set tag for this route\n-Tag value\n Distance value for this route\n-no is-type (level-1|level-1-2|level-2-only)\n-Negate a command or set its defaults\n-IS Level for this routing process (OSI only)\n-Act as a station router only\n-Act as both a station router and an area router\n-Act as an area router only\n-show ip bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n+network A.B.C.D/M rd ASN:nn_or_IP-address:nn tag WORD route-map WORD\n+Specify a network to announce via BGP\n+IP prefix /, e.g., 35.0.0.0/8\n+Specify Route Distinguisher\n+VPN Route Distinguisher\n+tag value\n+route map\n+route map name\n+no set community none\n+show isis interface detail\n Show running system information\n-IP information\n-BGP information\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-neighbor (A.B.C.D|X:X::X:X|WORD) send-community (both|all|extended|standard|large)\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Send Community attribute to this neighbor\n-Send Standard, Large and Extended Community attributes\n-Send Standard, Large and Extended Community attributes\n-Send Extended Community attributes\n-Send Standard Community attributes\n-Send Large Community attributes\n-no ip ospf priority A.B.C.D\n+ISIS network information\n+ISIS interface\n+show detailed information\n+no ospf transmit-delay\n Negate a command or set its defaults\n-IP Information\n OSPF interface commands\n-Router priority\n-Address of interface\n-no redistribute (kernel|connected|static|ripng|ospf6|isis|babel|nhrp) metric <0-4294967295>\n-Negate a command or set its defaults\n-Redistribute information from another routing protocol\n+Link state transmit delay\n+show ipv6 route (kernel|connected|static|ripng|ospf6|isis|bgp|babel|nhrp) vrf <0-65535>\n+Show running system information\n+IP information\n+IP routing table\n Kernel routes (not installed via the zebra RIB)\n Connected routes (directly attached subnet or host)\n Statically configured routes\n Routing Information Protocol next-generation (IPv6) (RIPng)\n Open Shortest Path First (IPv6) (OSPFv3)\n Intermediate System to Intermediate System (IS-IS)\n+Border Gateway Protocol (BGP)\n Babel routing protocol (Babel)\n Next Hop Resolution Protocol (NHRP)\n-Metric for redistributed routes\n-Default metric\n-ip route A.B.C.D/M (A.B.C.D|INTERFACE|null0)\n+Specify the VRF\n+The VRF ID\n+no ip rip authentication string\n+Negate a command or set its defaults\n IP information\n-Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n-IP gateway address\n-IP gateway interface name\n-Null interface\n-show bgp view WORD (ipv4) (vpnv4) statistics\n+Routing Information Protocol\n+Authentication control\n+Authentication string\n+show bgp rsclient (A.B.C.D|X:X::X:X)\n Show running system information\n BGP information\n-BGP view\n-Address family\n-Address Family modifier\n-BGP RIB advertisement statistics\n-aggregate-address A.B.C.D A.B.C.D as-set\n-Configure BGP aggregate entries\n-Aggregate address\n-Aggregate mask\n-Generate AS set path information\n-show bgp ipv4 (unicast|multicast) large-community-list (<1-500>|WORD)\n+Information about Route Server Client\n+Neighbor address\n+IPv6 address\n+show ipv6 mbgp neighbors (A.B.C.D|X:X::X:X) routes\n Show running system information\n-BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Display routes matching the large-community-list\n-large-community-list number\n-large-community-list name\n-show ipv6 route summary prefix vrf <0-65535>\n+IPv6 information\n+MBGP information\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display routes learned from neighbor\n+show interface vrf <0-65535>\n Show running system information\n-IP information\n-IPv6 routing table\n-Summary of all IPv6 routes\n-Prefix routes\n+Interface status and configuration\n Specify the VRF\n The VRF ID\n-show bgp view WORD (ipv4|ipv6) (unicast|multicast) large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n-Show running system information\n-BGP information\n-BGP view\n-View name\n-Address family\n-Address family\n-Address family modifier\n-Address family modifier\n-Display routes matching the large-communities\n-large-community number\n-large-community number\n-large-community number\n-no debug isis local-updates\n-Disable debugging functions (see also 'debug')\n-IS-IS information\n-IS-IS local update packets\n-route-map RMAP_NAME (in|out) IFNAME\n-Route map set\n-Route map name\n-Route map set for input filtering\n-Route map set for output filtering\n-Route map interface name\n-no neighbor (A.B.C.D|X:X::X:X|WORD) dont-capability-negotiate\n-Negate a command or set its defaults\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Do not perform capability negotiation\n-show ip bgp view WORD A.B.C.D\n-Show running system information\n-IP information\n+Configure BGP aggregate entries\n+Aggregate prefix\n+clear bgp (A.B.C.D|X:X::X:X)\n+Reset functions\n BGP information\n-BGP view\n-View name\n-Network in the BGP routing table to display\n-show ip prefix-list summary WORD\n-Show running system information\n-IP information\n-Build a prefix list\n-Summary of prefix lists\n-Name of a prefix list\n-clear ip bgp * soft out\n+BGP neighbor address to clear\n+BGP IPv6 neighbor to clear\n+nhrp event socket SOCKET\n+Next Hop Resolution Protocol functions\n+Event Manager commands\n+Event Manager unix socket path\n+Unix path for the socket\n+clear ip bgp * ipv4 (unicast|multicast) soft out\n Reset functions\n IP information\n BGP information\n Clear all peers\n+Address family\n+Address Family modifier\n+Address Family modifier\n Soft reconfig inbound and outbound updates\n Resend all outbound updates\n-clear bgp (A.B.C.D|X:X::X:X) soft\n-Reset functions\n-BGP information\n-BGP neighbor address to clear\n-BGP IPv6 neighbor to clear\n-Soft reconfig inbound and outbound updates\n-show ip route summary prefix vrf <0-65535>\n-Show running system information\n-IP information\n-IP routing table\n-Summary of all routes\n-Prefix routes\n-Specify the VRF\n-The VRF ID\n-no ipv6 route X:X::X:X/M X:X::X:X INTERFACE\n-Negate a command or set its defaults\n+ipv6 route X:X::X:X/M X:X::X:X INTERFACE <1-255>\n IP information\n Establish static routes\n IPv6 destination prefix (e.g. 3ffe:506::/32)\n IPv6 gateway address\n IPv6 gateway interface name\n-show bgp ipv6 X:X::X:X/M (bestpath|multipath)\n+Distance value for this prefix\n+show bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export)\n Show running system information\n BGP information\n Address family\n-IPv6 prefix /\n-Display only the bestpath\n-Display only multipaths\n-neighbor A.B.C.D poll-interval <1-65535>\n-Specify neighbor router\n-Neighbor IP address\n-Dead Neighbor Polling interval\n-isis hello-multiplier <2-100> level-1\n-IS-IS commands\n-Set multiplier for Hello holding time\n-Hello multiplier value\n-Specify hello multiplier for level-1 IIHs\n-show ip pim assert-metric\n+Address Family modifier\n+Address Family modifier\n+Display routes matching the communities\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+show ipv6 route vrf <0-65535>\n Show running system information\n IP information\n-PIM information\n-PIM interface assert metric\n-match peer (A.B.C.D|X:X::X:X)\n-Match values from routing table\n-Match peer address\n-IP address of peer\n-IPv6 address of peer\n-debug bgp keepalives\n-Debugging functions (see also 'undebug')\n-BGP information\n-BGP keepalives\n-no match community\n-Negate a command or set its defaults\n-Match values from routing table\n-Match BGP community list\n-distance ospf6 inter-area <1-255> intra-area <1-255>\n-Define an administrative distance\n-OSPF6 Administrative distance\n-Inter-area routes\n-Distance for inter-area routes\n-Intra-area routes\n-Distance for intra-area routes\n-no debug igmp packets\n-Negate a command or set its defaults\n+IPv6 routing table\n+Specify the VRF\n+The VRF ID\n+show ip route\n+Show running system information\n+IP information\n+IP routing table\n+debug igmp packets\n Debugging functions (see also 'undebug')\n IGMP protocol activity\n IGMP protocol packets\n-no bgp multiple-instance\n-Negate a command or set its defaults\n-BGP information\n-BGP multiple instance\n-no router-id\n+no distribute-list WORD out (kernel|connected|static|rip|isis|bgp|pim|babel|nhrp)\n Negate a command or set its defaults\n-router-id for the OSPF process\n-show ip bgp ipv4 (unicast|multicast) neighbors (A.B.C.D|X:X::X:X) received prefix-filter\n+Filter networks in routing updates\n+Access-list name\n+Filter outgoing routing updates\n+Kernel routes (not installed via the zebra RIB)\n+Connected routes (directly attached subnet or host)\n+Statically configured routes\n+Routing Information Protocol (RIP)\n+Intermediate System to Intermediate System (IS-IS)\n+Border Gateway Protocol (BGP)\n+Protocol Independent Multicast (PIM)\n+Babel routing protocol (Babel)\n+Next Hop Resolution Protocol (NHRP)\n+show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) (detail|dump|internal)\n Show running system information\n-IP information\n-BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display information received from a BGP neighbor\n-Display the prefixlist filter\n-no distance ospf {intra-area|inter-area|external}\n-Negate a command or set its defaults\n-Define an administrative distance\n-OSPF Administrative distance\n-OSPF Distance\n-Intra-area routes\n-Inter-area routes\n-External routes\n-no allow-ecmp\n-Negate a command or set its defaults\n-Allow Equal Cost MultiPath\n-set comm-list (<1-99>|<100-500>|WORD) delete\n-Set values in destination routing protocol\n-set BGP community list (for deletion)\n-Community-list number (standard)\n-Community-list number (expanded)\n-Community-list name\n-Delete matching communities\n-no ip community-list <100-500> (deny|permit) .LINE\n-Negate a command or set its defaults\n-IP information\n-Add a community list entry\n-Community list number (expanded)\n-Specify community to reject\n-Specify community to accept\n-An ordered list as a regular-expression\n-show ip bgp community-list (<1-500>|WORD)\n+IPv6 information\n+Open Shortest Path First (OSPF) for IPv6\n+Display Link state database\n+Display Router LSAs\n+Display Network LSAs\n+Display Inter-Area-Prefix LSAs\n+Display Inter-Area-Router LSAs\n+Display As-External LSAs\n+Display Group-Membership LSAs\n+Display Type-7 LSAs\n+Display Link LSAs\n+Display Intra-Area-Prefix LSAs\n+Display details of LSAs\n+Dump LSAs\n+Display LSA's internal information\n+show ipv6 route summary prefix\n Show running system information\n IP information\n-BGP information\n-Display routes matching the community-list\n-community-list number\n-community-list name\n-no debug bgp events\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-BGP information\n-BGP events\n-show bgp ipv6 large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n-Show running system information\n-BGP information\n-Address family\n-Display routes matching the large-communities\n-large-community number\n-large-community number\n-large-community number\n-large-community number\n-show ipv6 mroute vrf all\n-Show running system information\n+IPv6 routing table\n+Summary of all IPv6 routes\n+Prefix routes\n+ip rip receive version (1|2)\n IP information\n-IPv6 Multicast routing table\n-Specify the VRF\n-All VRFs\n-debug ospf6 interface\n-Debugging functions (see also 'undebug')\n-Open Shortest Path First (OSPF) for IPv6\n-Debug OSPFv3 Interface\n-no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (hello-interval|retransmit-interval|transmit-delay|dead-interval) (hello-interval|retransmit-interval|transmit-delay|dead-interval)\n+Routing Information Protocol\n+Advertisement reception\n+Version control\n+RIP version 1\n+RIP version 2\n+no lsp-gen-interval level-2 <1-120>\n Negate a command or set its defaults\n+Minimum interval between regenerating same LSP\n+Set interval for level 2 only\n+Minimum interval in seconds\n+area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D\n OSPF area parameters\n OSPF area ID in IP address format\n OSPF area ID as a decimal value\n Configure a virtual link\n Router ID of the remote ABR\n-Time between HELLO packets\n-Time between retransmitting lost link state advertisements\n-Link state transmit delay\n-Interval after which a neighbor is declared dead\n-Time between HELLO packets\n-Time between retransmitting lost link state advertisements\n-Link state transmit delay\n-Interval after which a neighbor is declared dead\n-set tag <1-4294967295>\n-Set values in destination routing protocol\n-Tag value for routing protocol\n-Tag value\n-show bgp ipv6 (encap|multicast|unicast|vpn) flap-statistics regexp .LINE\n-Show running system information\n+accept-lifetime HH:MM:SS MONTH <1-31> <1993-2035> HH:MM:SS MONTH <1-31> <1993-2035>\n+Set accept lifetime of the key\n+Time to start\n+Month of the year to start\n+Day of th month to start\n+Year to start\n+Time to expire\n+Month of the year to expire\n+Day of th month to expire\n+Year to expire\n+no max-lsp-lifetime level-2 <350-65535>\n+Negate a command or set its defaults\n+Maximum LSP lifetime for Level 2 only\n+LSP lifetime for Level 2 only in seconds\n+no ip route A.B.C.D/M (A.B.C.D|INTERFACE|null0) <1-255> vrf <0-65535>\n+Negate a command or set its defaults\n+IP information\n+Establish static routes\n+IP destination prefix (e.g. 10.0.0.0/8)\n+IP gateway address\n+IP gateway interface name\n+Null interface\n+Distance value for this route\n+Specify the VRF\n+The VRF ID\n+no neighbor (A.B.C.D|X:X::X:X|WORD) maximum-prefix <1-4294967295> warning-only\n+Negate a command or set its defaults\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Maximum number of prefix accept from this peer\n+maximum no. of prefix limit\n+Only give warning message when limit is exceeded\n+ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole) vrf <0-65535>\n+IP information\n+Establish static routes\n+IP destination prefix (e.g. 10.0.0.0/8)\n+IP gateway address\n+IP gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Specify the VRF\n+The VRF ID\n+ip irdp shutdown\n+IP information\n+ICMP Router discovery shutdown on this interface\n+neighbor (A.B.C.D|X:X::X:X|WORD) ttl-security hops <1-254>\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Specify the maximum number of hops to the BGP peer\n+no debug bgp\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n BGP information\n-IPv6 information\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Display flap statistics of routes\n-Display routes matching the AS path regular expression\n-A regular-expression to match the BGP AS paths\n-clear bgp external in\n+undebug all bgp\n+Disable debugging functions (see also 'debug')\n+Enable all debugging\n+BGP information\n+clear ip bgp * in prefix-filter\n Reset functions\n+IP information\n BGP information\n-Clear all external peers\n+Clear all peers\n Send route-refresh unless using 'soft-reconfiguration inbound'\n-no ip community-list <1-99> (deny|permit) .AA:NN\n-Negate a command or set its defaults\n-IP information\n-Add a community list entry\n-Community list number (standard)\n-Specify community to reject\n-Specify community to accept\n-Community number in aa:nn format or internet|local-AS|no-advertise|no-export\n-log-adjacency-changes\n-Log changes in adjacency state\n-debug isis adj-packets\n-Debugging functions (see also 'undebug')\n-IS-IS information\n-IS-IS Adjacency related packets\n-ipv6 nd home-agent-preference <0-65535>\n-Interface IPv6 config commands\n-Neighbor discovery\n-Home Agent preference\n-preference value (default is 0, least preferred)\n-no set ipv6 next-hop local X:X::X:X\n-Negate a command or set its defaults\n-Set values in destination routing protocol\n-IPv6 information\n-IPv6 next-hop address\n-IPv6 local address\n-IPv6 address of next hop\n-show bgp ipv4 (encap|multicast|unicast|vpn) flap-statistics cidr-only\n+Push out prefix-list ORF and do inbound soft reconfig\n+show bgp view WORD (ipv4|ipv6) (encap|multicast|unicast|vpn) A.B.C.D\n Show running system information\n BGP information\n+BGP view\n+View name\n+Address Family\n Address Family\n Address Family Modifier\n Address Family Modifier\n Address Family Modifier\n Address Family Modifier\n+Network in the BGP routing table to display\n+RIP static route configuration\n+IP prefix /\n+no neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged next-hop med as-path\n+Negate a command or set its defaults\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+BGP attribute is propagated unchanged to this neighbor\n+Nexthop attribute\n+Med attribute\n+As-path attribute\n+send-lifetime HH:MM:SS <1-31> MONTH <1993-2035> HH:MM:SS <1-31> MONTH <1993-2035>\n+Set send lifetime of the key\n+Time to start\n+Day of th month to start\n+Month of the year to start\n+Year to start\n+Time to expire\n+Day of th month to expire\n+Month of the year to expire\n+Year to expire\n+show bgp ipv6 (encap|multicast|unicast|vpn) dampening flap-statistics X:X::X:X/M\n+Show running system information\n+BGP information\n+Address family\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n+Display detailed information about dampening\n Display flap statistics of routes\n-Display only routes with non-natural netmasks\n-ip prefix-list WORD seq <1-4294967295> (deny|permit) A.B.C.D/M le <0-32> ge <0-32>\n-IP information\n+IP prefix /, e.g., 35.0.0.0/8\n+ipv6 prefix-list WORD (deny|permit) X:X::X:X/M le <0-128>\n+IPv6 information\n Build a prefix list\n Name of a prefix list\n-sequence number of an entry\n-Sequence number\n Specify packets to reject\n Specify packets to forward\n-IP prefix /, e.g., 35.0.0.0/8\n+IPv6 prefix /, e.g., 3ffe::/16\n Maximum prefix length to be matched\n Maximum prefix length\n-Minimum prefix length to be matched\n-Minimum prefix length\n-show ipv6 mbgp community (AA:NN|local-AS|no-advertise|no-export)\n+show ipv6 mbgp large-community (AA:BB:CC) (AA:BB:CC)\n Show running system information\n IPv6 information\n MBGP information\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-isis metric <0-16777215> level-1\n+Display routes matching the large-communities\n+large-community number\n+large-community number\n+no match origin\n+Negate a command or set its defaults\n+Match values from routing table\n+BGP origin code\n+no isis priority\n+Negate a command or set its defaults\n IS-IS commands\n-Set default metric for circuit\n-Default metric value\n-Specify metric for level-1 routing\n-no ip prefix-list WORD (deny|permit) A.B.C.D/M ge <0-32> le <0-32>\n+Set priority for Designated Router election\n+no passive-interface (IFNAME|default)\n Negate a command or set its defaults\n-IP information\n-Build a prefix list\n-Name of a prefix list\n-Specify packets to reject\n-Specify packets to forward\n-IP prefix /, e.g., 35.0.0.0/8\n-Minimum prefix length to be matched\n-Minimum prefix length\n-Maximum prefix length to be matched\n-Maximum prefix length\n-no use-bw\n+Suppress routing updates on an interface\n+Interface name\n+default for all interfaces\n+no isis psnp-interval\n Negate a command or set its defaults\n-Disable Unidirectional Utilised Bandwidth on this interface\n-no debug bgp as4\n+IS-IS commands\n+Set PSNP interval in seconds\n+no match community (<1-99>|<100-500>|WORD)\n Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-BGP information\n-BGP AS4 actions\n-no redistribute (kernel|connected|static|ospf6|isis|bgp|babel|nhrp) metric <0-16>\n+Match values from routing table\n+Match BGP community list\n+Community-list number (standard)\n+Community-list number (expanded)\n+Community-list name\n+set-attached-bit\n+Set attached bit to identify as L1/L2 router for inter-area traffic\n+Set attached bit\n+no area A.B.C.D filter-list prefix WORD (in|out)\n Negate a command or set its defaults\n-Redistribute\n-Kernel routes (not installed via the zebra RIB)\n-Connected routes (directly attached subnet or host)\n-Statically configured routes\n-Open Shortest Path First (IPv6) (OSPFv3)\n-Intermediate System to Intermediate System (IS-IS)\n-Border Gateway Protocol (BGP)\n-Babel routing protocol (Babel)\n-Next Hop Resolution Protocol (NHRP)\n-Metric value\n-show ipv6 bgp\n-Show running system information\n-IP information\n-BGP information\n-show bgp ipv6 vpn\n-Show running system information\n+OSPFv6 area parameters\n+OSPFv6 area ID in IP address format\n+Filter networks between OSPFv6 areas\n+Filter prefixes between OSPFv6 areas\n+Name of an IPv6 prefix-list\n+Filter networks sent to this area\n+Filter networks sent from this area\n+ospf hello-interval <1-65535>\n+debug bgp updates\n+Debugging functions (see also 'undebug')\n BGP information\n-Address Family\n-Display VPN NLRI specific information\n-no access-list WORD (deny|permit) A.B.C.D/M\n-Negate a command or set its defaults\n+BGP updates\n+access-list (<100-199>|<2000-2699>) (deny|permit) ip any any\n Add an access list entry\n-IP zebra access-list name\n+IP extended access list\n+IP extended access list (expanded range)\n Specify packets to reject\n Specify packets to forward\n-Prefix to match. e.g. 10.0.0.0/8\n-show bgp view WORD neighbors (A.B.C.D|X:X::X:X) advertised-routes\n-Show running system information\n-BGP information\n-BGP view\n-View name\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display the routes advertised to a BGP neighbor\n-show ip pim rpf\n-Show running system information\n-IP information\n-PIM information\n-PIM cached source rpf information\n-undebug bgp events\n-Disable debugging functions (see also 'debug')\n-BGP information\n-BGP events\n-show isis neighbor detail\n-Show running system information\n-ISIS network information\n-ISIS neighbor adjacencies\n-show detailed information\n-no ip ospf area [A.B.C.D]\n+Any Internet Protocol\n+Any source host\n+Any destination host\n+no debug ospf6 zebra (send|recv)\n Negate a command or set its defaults\n-IP Information\n-OSPF interface commands\n-Disable OSPF on this interface\n-Address of interface\n-clear bgp peer-group WORD\n-Reset functions\n+Debugging functions (see also 'undebug')\n+Open Shortest Path First (OSPF) for IPv6\n+Debug connection between zebra\n+Debug Sending zebra\n+Debug Receiving zebra\n+undebug bgp keepalives\n+Disable debugging functions (see also 'debug')\n BGP information\n-Clear all members of peer-group\n-BGP peer-group name\n-no set ipv6 next-hop peer-address\n-Negate a command or set its defaults\n-Set values in destination routing protocol\n+BGP keepalives\n+ipv6 prefix-list WORD (deny|permit) X:X::X:X/M ge <0-128> le <0-128>\n IPv6 information\n-IPv6 next-hop address\n-no interface IFNAME area A.B.C.D\n-Negate a command or set its defaults\n-Disable routing on an IPv6 interface\n-Interface name(e.g. ep0)\n-Specify the OSPF6 area ID\n-OSPF6 area ID in IPv4 address notation\n-ip route A.B.C.D/M (reject|blackhole) vrf <0-65535>\n-IP information\n-Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Specify the VRF\n-The VRF ID\n-ip rip authentication mode (md5|text) auth-length (rfc|old-ripd)\n-IP information\n-Routing Information Protocol\n-Authentication control\n-Authentication mode\n-Keyed message digest\n-Clear text authentication\n-MD5 authentication data length\n-RFC compatible\n-Old ripd compatible\n-no ipv6 route X:X::X:X/M X:X::X:X INTERFACE (reject|blackhole) vrf <0-65535>\n-clear ip bgp A.B.C.D vpnv4 unicast in\n-Reset functions\n-IP information\n-BGP information\n-BGP neighbor address to clear\n-Address family\n-Address Family Modifier\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-show ipv6 mbgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n+Build a prefix list\n+Name of a prefix list\n+Specify packets to reject\n+Specify packets to forward\n+IPv6 prefix /, e.g., 3ffe::/16\n+Minimum prefix length to be matched\n+Minimum prefix length\n+Maximum prefix length to be matched\n+Maximum prefix length\n+isis psnp-interval <1-120> level-1\n+IS-IS commands\n+Set PSNP interval in seconds\n+PSNP interval value\n+Specify interval for level-1 PSNPs\n+bgp bestpath med missing-as-worst confed\n+BGP specific commands\n+Change the default bestpath selection\n+MED attribute\n+Treat missing MED as the least preferred one\n+Compare MED among confederation paths\n+no distance <1-255> A.B.C.D/M\n+show ipv6 bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n Show running system information\n IPv6 information\n-MBGP information\n+BGP information\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n Exact match of the communities\n-show ip pim hello\n-Show running system information\n-IP information\n-PIM information\n-PIM interface hello information\n-no ip irdp\n-Negate a command or set its defaults\n-IP information\n-Disable ICMP Router discovery on this interface\n-no enable\n-Negate a command or set its defaults\n-Disable link parameters on this interface\n-no passive-interface IFNAME\n-Negate a command or set its defaults\n-Suppress routing updates on an interface\n-Interface name\n-show ipv6 ospf6 database adv-router A.B.C.D\n+show ipv6 bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n Show running system information\n IPv6 information\n-Open Shortest Path First (OSPF) for IPv6\n-Display Link state database\n-Search by Advertising Router\n-Specify Advertising Router as IPv4 address notation\n-debug pim trace\n-Debugging functions (see also 'undebug')\n-PIM protocol activity\n-PIM internal daemon activity\n-show ip ospf database (asbr-summary|external|network|router|summary|nssa-external|opaque-link|opaque-area|opaque-as) A.B.C.D\n-Show running system information\n-IP information\n-OSPF information\n-Database summary\n-ASBR summary link states\n-External link states\n-Network link states\n-Router link states\n-Network summary link states\n-NSSA external link state\n-Link local Opaque-LSA\n-Link area Opaque-LSA\n-Link AS Opaque-LSA\n-Link State ID (as an IP address)\n-show bgp regexp .LINE\n-Show running system information\n BGP information\n-Display routes matching the AS path regular expression\n-A regular-expression to match the BGP AS paths\n-show bgp view WORD (ipv4|ipv6) (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n-Show running system information\n-BGP information\n-BGP view\n-View name\n-Address family\n-Address family\n-Address family modifier\n-Address family modifier\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-no network A.B.C.D/M rd ASN:nn_or_IP-address:nn tag WORD\n-Negate a command or set its defaults\n-Specify a network to announce via BGP\n-IP prefix /, e.g., 35.0.0.0/8\n-Specify Route Distinguisher\n-ENCAP Route Distinguisher\n-tag value\n-no ip route A.B.C.D A.B.C.D (reject|blackhole) tag <1-4294967295>\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+no bgp bestpath med missing-as-worst confed\n Negate a command or set its defaults\n+BGP specific commands\n+Change the default bestpath selection\n+MED attribute\n+Treat missing MED as the least preferred one\n+Compare MED among confederation paths\n+clear ip bgp * out\n+Reset functions\n IP information\n-Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Tag of this route\n-Tag value\n-no isis hello-multiplier level-2\n+BGP information\n+Clear all peers\n+Resend all outbound updates\n+no bgp router-id\n Negate a command or set its defaults\n-IS-IS commands\n-Set multiplier for Hello holding time\n-Specify hello multiplier for level-2 IIHs\n-show ipv6 route\n+BGP information\n+Override configured router identifier\n+show ip prefix-list WORD A.B.C.D/M first-match\n Show running system information\n IP information\n-IPv6 routing table\n-offset-list WORD (in|out) <0-16> IFNAME\n-Modify RIPng metric\n-Access-list name\n-For incoming updates\n-For outgoing updates\n-Metric value\n-Interface to match\n-no exec-timeout\n+Build a prefix list\n+Name of a prefix list\n+IP prefix /, e.g., 35.0.0.0/8\n+First matched prefix\n+send-lifetime HH:MM:SS <1-31> MONTH <1993-2035> infinite\n+Set send lifetime of the key\n+Time to start\n+Day of th month to start\n+Month of the year to start\n+Year to start\n+Never expires\n+show version ospf6\n+Show running system information\n+Displays ospf6d version\n+send-lifetime HH:MM:SS <1-31> MONTH <1993-2035> HH:MM:SS MONTH <1-31> <1993-2035>\n+Set send lifetime of the key\n+Time to start\n+Day of th month to start\n+Month of the year to start\n+Year to start\n+Time to expire\n+Month of the year to expire\n+Day of th month to expire\n+Year to expire\n+no stub-router administrative\n Negate a command or set its defaults\n-Set the EXEC timeout\n-ipv6 nd prefix X:X::X:X/M\n-Interface IPv6 config commands\n-Neighbor discovery\n-Prefix information\n-IPv6 prefix\n-stub-router administrative\n Make router a stub router\n-Advertise inability to be a transit router\n+Advertise ability to be a transit router\n Administratively applied, for an indefinite period\n-show ip bgp\n-show ip rpf A.B.C.D\n-Show running system information\n-IP information\n-Display RPF information for multicast source\n-IP multicast source address (e.g. 10.0.0.0)\n-no bandwidth <1-10000000>\n+no ipv6 ospf6 network\n Negate a command or set its defaults\n-Set bandwidth informational parameter\n-Bandwidth in kilobits\n-match origin (egp|igp|incomplete)\n-Match values from routing table\n-BGP origin code\n-remote EGP\n-local IGP\n-unknown heritage\n-show ip igmp interface\n-Show running system information\n-IP information\n-IGMP information\n-IGMP interface information\n-ipv6 prefix-list WORD seq <1-4294967295> (deny|permit) (X:X::X:X/M|any)\n-IPv6 information\n-Build a prefix list\n-Name of a prefix list\n-sequence number of an entry\n-Sequence number\n-Specify packets to reject\n-Specify packets to forward\n-IPv6 prefix /, e.g., 3ffe::/16\n-Any prefix match. Same as \"::0/0 le 128\"\n-show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) adv-router A.B.C.D (detail|dump|internal)\n-Show running system information\n-IPv6 information\n+IPv6 Information\n Open Shortest Path First (OSPF) for IPv6\n-Display Link state database\n-Display Router LSAs\n-Display Network LSAs\n-Display Inter-Area-Prefix LSAs\n-Display Inter-Area-Router LSAs\n-Display As-External LSAs\n-Display Group-Membership LSAs\n-Display Type-7 LSAs\n-Display Link LSAs\n-Display Intra-Area-Prefix LSAs\n-Search by Advertising Router\n-Specify Advertising Router as IPv4 address notation\n-Display details of LSAs\n-Dump LSAs\n-Display LSA's internal information\n-no match extcommunity (<1-99>|<100-500>|WORD)\n-Negate a command or set its defaults\n-Match values from routing table\n-Match BGP/VPN extended community list\n-Extended community-list number (standard)\n-Extended community-list number (expanded)\n-Extended community-list name\n-redistribute rip\n-Redistribute information from another routing protocol\n-Routing Information Protocol (RIP)\n-clear ip bgp dampening A.B.C.D/M\n-Reset functions\n-IP information\n-BGP information\n-Clear route flap dampening information\n-IP prefix /, e.g., 35.0.0.0/8\n-clear bgp (A.B.C.D|X:X::X:X)\n+Network Type\n+Default to whatever interface type system specifies\n+clear bgp (A.B.C.D|X:X::X:X) in prefix-filter\n Reset functions\n BGP information\n BGP neighbor address to clear\n BGP IPv6 neighbor to clear\n-show ip ospf neighbor A.B.C.D\n-Show running system information\n-IP information\n-OSPF information\n-Neighbor list\n-Neighbor ID\n-ip large-community-list <1-99> (deny|permit) .AA:BB:CC\n-IP information\n-Add a large community list entry\n-Large Community list number (standard)\n-Specify large community to reject\n-Specify large community to accept\n-large community in 'aa:bb:cc' format\n-show bgp ipv4 (encap|multicast|unicast|vpn) flap-statistics regexp .LINE\n-Show running system information\n-BGP information\n-IP information\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Display flap statistics of routes\n-Display routes matching the AS path regular expression\n-A regular-expression to match the BGP AS paths\n-show ip bgp A.B.C.D/M\n-Show running system information\n-IP information\n-BGP information\n-IP prefix /, e.g., 35.0.0.0/8\n-show ip bgp ipv4 (unicast|multicast) community-list (<1-500>|WORD)\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+Push out the existing ORF prefix-list\n+no ip ospf dead-interval <1-65535>\n+Negate a command or set its defaults\n+IP Information\n+OSPF interface commands\n+Interval after which a neighbor is declared dead\n+no set ipv6 next-hop global\n+Negate a command or set its defaults\n+Set values in destination routing protocol\n+IPv6 information\n+IPv6 next-hop address\n+IPv6 global address\n+show bgp ipv6 (encap|multicast|unicast|vpn) X:X::X:X/M longer-prefixes\n Show running system information\n-IP information\n BGP information\n Address family\n Address Family modifier\n Address Family modifier\n-Display routes matching the community-list\n-community-list number\n-community-list name\n-clear ip bgp external ipv4 (unicast|multicast) soft in\n-Reset functions\n-IP information\n-BGP information\n-Clear all external peers\n-Address family\n Address Family modifier\n Address Family modifier\n-Soft reconfig inbound and outbound updates\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-show bgp large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n-Show running system information\n-BGP information\n-Display routes matching the large-communities\n-large-community number\n-large-community number\n-large-community number\n-show ip bgp ipv4 (unicast|multicast) neighbors\n+IP prefix /, e.g., 35.0.0.0/8\n+Display route and more specific routes\n+show bgp view WORD (ipv4|ipv6) (unicast|multicast) community\n Show running system information\n-IP information\n BGP information\n+BGP view\n+View name\n+Address family\n Address family\n Address Family modifier\n Address Family modifier\n-Detailed information on TCP and BGP neighbor connections\n-no debug zebra events\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-Zebra configuration\n-Debug option set for zebra events\n-show ipv6 prefix-list WORD seq <1-4294967295>\n+Display routes matching the communities\n+show bgp ipv6 vpn X:X::X:X/M\n Show running system information\n+BGP information\n+Address Family\n+Display VPN NLRI specific information\n+IP prefix /, e.g., 35.0.0.0/8\n+no (ip|ipv6) nhrp (shortcut|redirect)\n+Negate a command or set its defaults\n+IP information\n IPv6 information\n-Build a prefix list\n-Name of a prefix list\n-sequence number of an entry\n-Sequence number\n-(ip|ipv6) router isis WORD\n-Interface Internet Protocol config commands\n-IP router interface commands\n-IS-IS Routing for IP\n-Routing process tag\n-no aggregate-address A.B.C.D A.B.C.D summary-only as-set\n+Next Hop Resolution Protocol functions\n+Allow shortcut establishment\n+Send redirect notifications\n+no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D\n Negate a command or set its defaults\n-Configure BGP aggregate entries\n-Aggregate address\n-Aggregate mask\n-Filter more specific routes from updates\n-Generate AS set path information\n-clear ip bgp <1-4294967295> in prefix-filter\n-Reset functions\n+OSPF area parameters\n+OSPF area ID in IP address format\n+OSPF area ID as a decimal value\n+Configure a virtual link\n+Router ID of the remote ABR\n+undebug pim trace\n+Disable debugging functions (see also 'debug')\n+PIM protocol activity\n+PIM internal daemon activity\n+undebug pim packet-dump receive\n+Disable debugging functions (see also 'debug')\n+PIM protocol activity\n+PIM packet dump\n+Dump received packets\n+show ip ospf mpls-te router\n+Show running system information\n IP information\n-BGP information\n-Clear peers with the AS number\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-Push out prefix-list ORF and do inbound soft reconfig\n-clear ip igmp interfaces\n-Reset functions\n+OSPF information\n+MPLS-TE information\n+MPLS-TE Router parameters\n+ip route A.B.C.D A.B.C.D (reject|blackhole) <1-255> vrf <0-65535>\n IP information\n-IGMP clear commands\n-Reset IGMP interfaces\n-show bgp ipv4 encap rd ASN:nn_or_IP-address:nn neighbors (A.B.C.D|X:X::X:X) routes\n-Show running system information\n-BGP information\n-Address Family\n-Display ENCAP NLRI specific information\n-Display information for a route distinguisher\n-ENCAP Route Distinguisher\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display routes learned from neighbor\n+Establish static routes\n+IP destination prefix\n+IP destination prefix mask\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Distance value for this route\n+Specify the VRF\n+The VRF ID\n+ip irdp broadcast\n IP information\n-Turn on IP forwarding\n-show ip bgp dampening parameters\n+ICMP Router discovery on this interface using broadcast\n+isis csnp-interval <1-600>\n+IS-IS commands\n+Set CSNP interval in seconds\n+CSNP interval value\n+show bgp ipv4 large-community (AA:BB:CC)\n Show running system information\n-IP information\n BGP information\n-Display detailed information about dampening\n-Display detail of configured dampening parameters\n-ip prefix-list WORD seq <1-4294967295> (deny|permit) (A.B.C.D/M|any)\n IP information\n-Build a prefix list\n-Name of a prefix list\n-sequence number of an entry\n-Sequence number\n-Specify packets to reject\n-Specify packets to forward\n-IP prefix /, e.g., 35.0.0.0/8\n-Any prefix match. Same as \"0.0.0.0/0 le 32\"\n+Display routes matching the large-communities\n+large-community number\n+ip ospf dead-interval <1-65535> A.B.C.D\n+IP Information\n+OSPF interface commands\n+Interval after which a neighbor is declared dead\n+Address of interface\n+no ip multicast rpf-lookup-mode\n Negate a command or set its defaults\n-Set metric of redistributed routes\n-neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged next-hop med as-path\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-BGP attribute is propagated unchanged to this neighbor\n-Nexthop attribute\n-Med attribute\n-As-path attribute\n-clear ip bgp * ipv4 (unicast|multicast) in prefix-filter\n-Reset functions\n IP information\n-BGP information\n-Clear all peers\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-Push out prefix-list ORF and do inbound soft reconfig\n-ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE|null0)\n+Multicast options\n+RPF lookup behavior\n+debug pim packet-dump send\n+Debugging functions (see also 'undebug')\n+PIM protocol activity\n+PIM packet dump\n+Dump sent packets\n+no default-metric <0-16777214>\n+Negate a command or set its defaults\n+Set metric of redistributed routes\n+Default metric\n+no ip ospf priority A.B.C.D\n+Negate a command or set its defaults\n+IP Information\n+OSPF interface commands\n+Router priority\n+Address of interface\n+show ip ospf mpls-te interface [INTERFACE]\n+Show running system information\n IP information\n-Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n-IP gateway address\n-IP gateway interface name\n-Null interface\n-no debug igmp events\n+OSPF information\n+MPLS-TE information\n+Interface information\n+Interface name\n+ospf abr-type (cisco|ibm|shortcut|standard)\n+OSPF specific commands\n+Set OSPF ABR type\n+Alternative ABR, cisco implementation\n+Alternative ABR, IBM implementation\n+Shortcut ABR\n+Standard behavior (RFC2328)\n+no redistribute (kernel|connected|static|ospf|isis|bgp|pim|babel|nhrp) route-map WORD\n Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-IGMP protocol activity\n-IGMP protocol events\n-default-information originate (ipv4|ipv6) (level-1|level-2) {always|metric <0-16777215>|route-map WORD}\n-Control distribution of default information\n-Distribute a default route\n-Distribute default route for IPv4\n-Distribute default route for IPv6\n-Distribute default route into level-1\n-Distribute default route into level-2\n-Always advertise default route\n-Metric for default route\n-ISIS default metric\n+Redistribute information from another routing protocol\n+Kernel routes (not installed via the zebra RIB)\n+Connected routes (directly attached subnet or host)\n+Statically configured routes\n+Open Shortest Path First (OSPFv2)\n+Intermediate System to Intermediate System (IS-IS)\n+Border Gateway Protocol (BGP)\n+Protocol Independent Multicast (PIM)\n+Babel routing protocol (Babel)\n+Next Hop Resolution Protocol (NHRP)\n Route map reference\n Pointer to route-map entries\n-set atomic-aggregate\n-Set values in destination routing protocol\n-BGP atomic aggregate attribute\n-clear ip bgp peer-group WORD ipv4 (unicast|multicast) in\n+show bgp ipv6 vpn rd ASN:nn_or_IP-address:nn neighbors (A.B.C.D|X:X::X:X) advertised-routes\n+clear bgp ipv6 peer-group WORD\n Reset functions\n-IP information\n BGP information\n+Address family\n Clear all members of peer-group\n BGP peer-group name\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-show bgp view WORD ipv6 rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M\n+mpls-te on\n+MPLS-TE specific commands\n+Enable the MPLS-TE functionality\n+show ip route A.B.C.D/M vrf all\n Show running system information\n-BGP information\n-BGP view\n-View name\n-IPv6 Information\n-Information about Route Server Client\n-Neighbor address\n-IPv6 address\n-IPv6 prefix /, e.g., 3ffe::/16\n-show bgp ipv4 vpn neighbors (A.B.C.D|X:X::X:X) advertised-routes\n+IP information\n+IP routing table\n+IP prefix /, e.g., 35.0.0.0/8\n+Specify the VRF\n+All VRFs\n+show ip route (kernel|connected|static|rip|ospf|isis|bgp|pim|babel|nhrp)\n Show running system information\n-BGP information\n-Address Family\n-Display VPN NLRI specific information\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Display the routes advertised to a BGP neighbor\n-ip protocol PROTO route-map ROUTE-MAP\n-Negate a command or set its defaults\n-Apply route map to PROTO\n-Protocol name\n-Route map name\n-redistribute (kernel|connected|static|ospf|isis|bgp|pim|babel|nhrp)\n-Redistribute information from another routing protocol\n+IP information\n+IP routing table\n Kernel routes (not installed via the zebra RIB)\n Connected routes (directly attached subnet or host)\n Statically configured routes\n+Routing Information Protocol (RIP)\n Open Shortest Path First (OSPFv2)\n Intermediate System to Intermediate System (IS-IS)\n Border Gateway Protocol (BGP)\n Protocol Independent Multicast (PIM)\n Babel routing protocol (Babel)\n Next Hop Resolution Protocol (NHRP)\n-clear (ip|ipv6) nhrp (cache|shortcut)\n-Reset functions\n-IP information\n-IPv6 information\n-Next Hop Resolution Protocol functions\n-Dynamic cache entries\n-Shortcut entries\n-show bgp view WORD ipv6 (unicast|multicast) rsclient (A.B.C.D|X:X::X:X)\n+show bgp ipv6 neighbors (A.B.C.D|X:X::X:X)\n Show running system information\n BGP information\n-BGP view\n-View name\n Address family\n-Address Family modifier\n-Address Family modifier\n-Information about Route Server Client\n-Neighbor address\n-IPv6 address\n-show ip route tag <1-4294967295>vrf <0-65535>\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+match interface WORD\n+Match values from routing table\n+match first hop interface of route\n+Interface name\n+show ip rpf A.B.C.D vrf all\n Show running system information\n IP information\n-IP routing table\n-Show only routes with tag\n-Tag value\n+Display RPF information for multicast source\n+IP multicast source address (e.g. 10.0.0.0)\n Specify the VRF\n-The VRF ID\n-(area-password|domain-password) clear WORD authenticate snp (send-only|validate)\n-Configure the authentication password for an area\n-Set the authentication password for a routing domain\n-Authentication type\n-Area password\n-Authentication\n-SNP PDUs\n-Send but do not check PDUs on receiving\n-Send and check PDUs on receiving\n-route IPV6ADDR\n-Static route setup\n-Set static RIPng route announcement\n-show bgp ipv6 community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n+All VRFs\n+show ip bgp ipv4 (unicast|multicast) A.B.C.D\n Show running system information\n+IP information\n BGP information\n Address family\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-show bgp view WORD ipv6 X:X::X:X/M\n+Address Family modifier\n+Address Family modifier\n+Network in the BGP routing table to display\n+show bgp ipv6 (encap|multicast|unicast|vpn) large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n Show running system information\n BGP information\n-BGP view\n-View name\n Address family\n-IPv6 prefix /\n-no (area-password|domain-password)\n+Address family modifier\n+Address family modifier\n+Address family modifier\n+Address family modifier\n+Display routes matching the large-communities\n+large-community number\n+large-community number\n+large-community number\n+large-community number\n+clear bgp peer-group WORD soft in\n+Reset functions\n+BGP information\n+Clear all members of peer-group\n+BGP peer-group name\n+Soft reconfig inbound and outbound updates\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+no ip ospf network\n Negate a command or set its defaults\n-Configure the authentication password for an area\n-Set the authentication password for a routing domain\n-show bgp view WORD (ipv4|ipv6) (encap|multicast|unicast|vpn) A.B.C.D\n+IP Information\n+OSPF interface commands\n+Network type\n+no ip route A.B.C.D/M (reject|blackhole) tag <1-4294967295> <1-255>\n+Negate a command or set its defaults\n+IP information\n+Establish static routes\n+IP destination prefix (e.g. 10.0.0.0/8)\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Tag of this route\n+Tag value\n+Distance value for this route\n+max-lsp-lifetime level-1 <350-65535>\n+Maximum LSP lifetime for Level 1 only\n+LSP lifetime for Level 1 only in seconds\n+clear ip bgp peer-group WORD in\n+Reset functions\n+IP information\n+BGP information\n+Clear all members of peer-group\n+BGP peer-group name\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+redistribute (kernel|connected|static|ripng|ospf6|isis|babel|nhrp) route-map WORD metric <0-4294967295>\n+Redistribute information from another routing protocol\n+Kernel routes (not installed via the zebra RIB)\n+Connected routes (directly attached subnet or host)\n+Statically configured routes\n+Routing Information Protocol next-generation (IPv6) (RIPng)\n+Open Shortest Path First (IPv6) (OSPFv3)\n+Intermediate System to Intermediate System (IS-IS)\n+Babel routing protocol (Babel)\n+Next Hop Resolution Protocol (NHRP)\n+Route map reference\n+Pointer to route-map entries\n+Metric for redistributed routes\n+Default metric\n+match community (<1-99>|<100-500>|WORD) exact-match\n+Match values from routing table\n+Match BGP community list\n+Community-list number (standard)\n+Community-list number (expanded)\n+Community-list name\n+Do exact matching of communities\n+show ipv6 route summary prefix vrf all\n+Show running system information\n+IP information\n+IPv6 routing table\n+Summary of all IPv6 routes\n+Prefix routes\n+Specify the VRF\n+All VRFs\n+lsp-refresh-interval <1-65235>\n+LSP refresh interval\n+LSP refresh interval in seconds\n+no set originator-id A.B.C.D\n+Negate a command or set its defaults\n+Set values in destination routing protocol\n+BGP originator ID attribute\n+IP address of originator\n+show ip pim assert\n+Show running system information\n+IP information\n+PIM information\n+PIM interface assert\n+show bgp view WORD ipv6 rsclient summary\n Show running system information\n BGP information\n BGP view\n View name\n-Address Family\n-Address Family\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Network in the BGP routing table to display\n-show ipv6 mbgp prefix-list WORD\n+Address family\n+Information about Route Server Clients\n+Summary of all Route Server Clients\n+show ip ospf database\n Show running system information\n-IPv6 information\n-MBGP information\n-Display routes matching the prefix-list\n-IPv6 prefix-list name\n-no debug zebra kernel\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-Zebra configuration\n-Debug option set for zebra between kernel interface\n-clear ip bgp peer-group WORD ipv4 (unicast|multicast) soft\n-Reset functions\n IP information\n+OSPF information\n+Database summary\n+show bgp ipv6 (encap|multicast|unicast|vpn) flap-statistics X:X::X:X/M\n+Show running system information\n BGP information\n-Clear all members of peer-group\n-BGP peer-group name\n Address family\n Address Family modifier\n Address Family modifier\n-Soft reconfig inbound and outbound updates\n-show debugging isis\n-Show running system information\n-State of each debugging option\n-no max-lsp-lifetime level-2 <350-65535>\n-Negate a command or set its defaults\n-Maximum LSP lifetime for Level 2 only\n-LSP lifetime for Level 2 only in seconds\n-no bgp router-id A.B.C.D\n+Address Family modifier\n+Address Family modifier\n+Display flap statistics of routes\n+IP prefix /, e.g., 35.0.0.0/8\n+test pim receive dump INTERFACE A.B.C.D .LINE\n+Test PIM protocol\n+Test PIM message reception\n+Test PIM packet dump reception from neighbor\n+Interface\n+Neighbor address\n+Packet dump\n+debug igmp trace\n+Debugging functions (see also 'undebug')\n+IGMP protocol activity\n+IGMP internal daemon activity\n+no redistribute (kernel|connected|static|ospf|isis|bgp|pim|babel|nhrp)\n Negate a command or set its defaults\n+Redistribute information from another routing protocol\n+Kernel routes (not installed via the zebra RIB)\n+Connected routes (directly attached subnet or host)\n+Statically configured routes\n+Open Shortest Path First (OSPFv2)\n+Intermediate System to Intermediate System (IS-IS)\n+Border Gateway Protocol (BGP)\n+Protocol Independent Multicast (PIM)\n+Babel routing protocol (Babel)\n+Next Hop Resolution Protocol (NHRP)\n+clear bgp ipv6 (A.B.C.D|X:X::X:X) soft out\n+Reset functions\n BGP information\n-Override configured router identifier\n-Manually configured router identifier\n-no ipv6 nd other-config-flag\n-Negate a command or set its defaults\n-Interface IPv6 config commands\n-Neighbor discovery\n-Other statefull configuration flag\n-no area (A.B.C.D|<0-4294967295>) authentication\n-Negate a command or set its defaults\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Enable authentication\n-distance ospf6 inter-area <1-255> external <1-255>\n-Define an administrative distance\n-OSPF6 Administrative distance\n-Inter-area routes\n-Distance for inter-area routes\n-External routes\n-Distance for external routes\n-isis csnp-interval <1-600> level-1\n-IS-IS commands\n-Set CSNP interval in seconds\n-CSNP interval value\n-Specify interval for level-1 CSNPs\n-no isis csnp-interval <1-600>\n+Address family\n+BGP neighbor address to clear\n+BGP IPv6 neighbor to clear\n+Soft reconfig inbound and outbound updates\n+Resend all outbound updates\n+no debug bgp as4\n Negate a command or set its defaults\n-IS-IS commands\n-Set CSNP interval in seconds\n-CSNP interval value\n-debug bgp as4 segment\n Debugging functions (see also 'undebug')\n BGP information\n BGP AS4 actions\n-BGP AS4 aspath segment handling\n-no debug ospf lsa (generate|flooding|install|refresh)\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-OSPF information\n-OSPF Link State Advertisement\n-LSA Generation\n-LSA Flooding\n-LSA Install/Delete\n-LSA Refres\n-no ipv6 prefix-list sequence-number\n+no passive-interface IFNAME A.B.C.D\n Negate a command or set its defaults\n+Allow routing updates on an interface\n+Interface's name\n+ipv6 bgp network X:X::X:X/M\n IPv6 information\n-Build a prefix list\n-Include/exclude sequence numbers in NVGEN\n-ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE|null0) vrf <0-65535>\n-IP information\n-Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n-IP gateway address\n-IP gateway interface name\n-Null interface\n-Specify the VRF\n-The VRF ID\n-show bgp ipv4 vpn A.B.C.D\n-Show running system information\n BGP information\n-Address Family\n-Display VPN NLRI specific information\n-Network in the BGP routing table to display\n-ip rip authentication key-chain LINE\n+Specify a network to announce via BGP\n+IPv6 prefix /, e.g., 3ffe::/16\n+clear ip prefix-list WORD A.B.C.D/M\n+Reset functions\n IP information\n-Routing Information Protocol\n-Authentication control\n-Authentication key-chain\n-name of key-chain\n-no set atomic-aggregate\n+Build a prefix list\n+Name of a prefix list\n+IP prefix /, e.g., 35.0.0.0/8\n+no set originator-id\n Negate a command or set its defaults\n Set values in destination routing protocol\n-BGP atomic aggregate attribute\n-show isis database WORD\n-Show running system information\n+BGP originator ID attribute\n+debug isis adj-packets\n+Debugging functions (see also 'undebug')\n IS-IS information\n-IS-IS link state database\n-Negate a command or set its defaults\n-Modify RIP metric\n-Access-list name\n-For incoming updates\n-For outgoing updates\n-Metric value\n-no ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE|null0) vrf <0-65535>\n-Negate a command or set its defaults\n+IS-IS Adjacency related packets\n+auto-cost reference-bandwidth <1-4294967>\n+Calculate OSPF interface cost according to bandwidth\n+Use reference bandwidth method to assign OSPF cost\n+The reference bandwidth in terms of Mbits per second\n+ava-bw BANDWIDTH\n+Unidirectional Available Bandwidth\n+Bytes/second (IEEE floating point format)\n+ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE|null0)\n IP information\n Establish static routes\n IP destination prefix\n IP destination prefix mask\n IP gateway address\n IP gateway interface name\n Null interface\n-Specify the VRF\n-The VRF ID\n-debug pim packet-dump receive\n-Debugging functions (see also 'undebug')\n-PIM protocol activity\n-PIM packet dump\n-Dump received packets\n-no neighbor (A.B.C.D|X:X::X:X|WORD) next-hop-self {all}\n-Negate a command or set its defaults\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Disable the next hop calculation for this neighbor\n-Apply also to ibgp-learned routes when acting as a route reflector\n-no area (A.B.C.D|<0-4294967295>) nssa\n+no default-metric <1-16>\n Negate a command or set its defaults\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Configure OSPF area as nssa\n-neighbor (A.B.C.D|X:X::X:X|WORD) description .LINE\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Neighbor specific description\n-Up to 80 characters describing this neighbor\n-show ip bgp flap-statistics A.B.C.D/M\n+Set a metric of redistribute routes\n+Default metric\n+show ipv6 ospf6 interface IFNAME\n Show running system information\n-IP information\n-BGP information\n-Display flap statistics of routes\n-IP prefix /, e.g., 35.0.0.0/8\n-show bgp ipv6 rsclient (A.B.C.D|X:X::X:X) X:X::X:X\n+IPv6 Information\n+Open Shortest Path First (OSPF) for IPv6\n+Interface information\n+Interface name(e.g. ep0)\n+show bgp ipv4 (unicast|multicast) rsclient (A.B.C.D|X:X::X:X) A.B.C.D\n Show running system information\n BGP information\n-IPv6 Information\n+Address family\n+Address Family modifier\n+Address Family modifier\n Information about Route Server Client\n Neighbor address\n IPv6 address\n Network in the BGP routing table to display\n-no match ip next-hop\n-Negate a command or set its defaults\n-Match values from routing table\n-IP information\n-Match next-hop address of route\n-neighbor (A.B.C.D|X:X::X:X|WORD) dont-capability-negotiate\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Do not perform capability negotiation\n-show ip community-list\n-Show running system information\n-IP information\n-List community-list\n-no debug mroute\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-PIM interaction with kernel MFC cache\n-match community (<1-99>|<100-500>|WORD)\n-Match values from routing table\n-Match BGP community list\n-Community-list number (standard)\n-Community-list number (expanded)\n-Community-list name\n-show bgp view WORD (ipv4|ipv6) (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export)\n+show bgp view WORD neighbors (A.B.C.D|X:X::X:X) received-routes\n Show running system information\n BGP information\n BGP view\n View name\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display the received routes from neighbor\n+clear ip bgp external ipv4 (unicast|multicast) in prefix-filter\n+Reset functions\n+IP information\n+BGP information\n+Clear all external peers\n Address family\n-Address family\n-Address family modifier\n-Address family modifier\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-no max-metric router-lsa on-startup\n+Address Family modifier\n+Address Family modifier\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+Push out prefix-list ORF and do inbound soft reconfig\n+no ip rip send version (1|2)\n Negate a command or set its defaults\n-OSPF maximum / infinite-distance metric\n-Advertise own Router-LSA with infinite distance (stub router)\n-Automatically advertise stub Router-LSA on startup of OSPF\n-ipv6 nd prefix X:X::X:X/M (<0-4294967295>|infinite) (<0-4294967295>|infinite) (off-link|) (no-autoconfig|)\n-Interface IPv6 config commands\n-Neighbor discovery\n-Prefix information\n-IPv6 prefix\n-Valid lifetime in seconds\n-Infinite valid lifetime\n-Preferred lifetime in seconds\n-Infinite preferred lifetime\n-Do not use prefix for onlink determination\n-Do not use prefix for autoconfiguration\n-on-match goto <1-65535>\n-Exit policy on matches\n-Goto Clause number\n-show bgp ipv4 large-community-list (<1-500>|WORD)\n-Show running system information\n-BGP information\n IP information\n-Display routes matching the large-community-list\n-large-community-list number\n-large-community-list name\n-no access-list (<1-99>|<100-199>|<1300-1999>|<2000-2699>|WORD) remark .LINE\n-Negate a command or set its defaults\n-Add an access list entry\n-IP standard access list\n-IP extended access list\n-IP standard access list (expanded range)\n-IP extended access list (expanded range)\n-IP zebra access-list\n-Access list entry comment\n-Comment up to 100 characters\n-no distance <1-255>\n+Routing Information Protocol\n+Advertisement transmission\n+Version control\n+Version 1\n+Version 2\n+no isis passive\n Negate a command or set its defaults\n-Define an administrative distance\n-OSPF6 Administrative distance\n-debug ospf6 message (unknown|hello|dbdesc|lsreq|lsupdate|lsack|all)\n-Debugging functions (see also 'undebug')\n-Open Shortest Path First (OSPF) for IPv6\n-Debug OSPFv3 message\n-Debug Unknown message\n-Debug Hello message\n-Debug Database Description message\n-Debug Link State Request message\n-Debug Link State Update message\n-Debug Link State Acknowledgement message\n-Debug All message\n-no match metric\n+IS-IS commands\n+Configure the passive mode for interface\n+bgp confederation peers .<1-4294967295>\n+BGP specific commands\n+AS confederation parameters\n+Peer ASs in BGP confederation\n+AS number\n+no access-class [WORD]\n Negate a command or set its defaults\n-Match values from routing table\n-Match metric of route\n-ip route A.B.C.D A.B.C.D (reject|blackhole) tag <1-4294967295>vrf <0-65535>\n+Filter connections based on an IP access list\n+IP access list\n+ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole) tag <1-4294967295> <1-255>\n IP information\n Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n+IP destination prefix (e.g. 10.0.0.0/8)\n+IP gateway address\n+IP gateway interface name\n Emit an ICMP unreachable when matched\n Silently discard pkts when matched\n Set tag for this route\n Tag value\n+Distance value for this route\n+no ip mroute A.B.C.D/M (A.B.C.D|INTERFACE) vrf <0-65535>\n+Negate a command or set its defaults\n+IP information\n+Configure static unicast route into MRIB for multicast RPF lookup\n+IP destination prefix (e.g. 10.0.0.0/8)\n+Nexthop address\n+Nexthop interface name\n Specify the VRF\n The VRF ID\n-debug ripng packet (recv|send)\n-Debugging functions (see also 'undebug')\n-RIPng configuration\n-Debug option set for ripng packet\n-Debug option set for receive packet\n-Debug option set for send packet\n-Route-map comment\n-Comment describing this route-map rule\n-test pim receive hello INTERFACE A.B.C.D <0-65535> <0-65535> <0-65535> <0-32767> <0-65535> <0-1>[LINE]\n-Test PIM protocol\n-Test PIM message reception\n-Test PIM hello reception from neighbor\n-Interface\n-Neighbor address\n-Neighbor holdtime\n-Neighbor DR priority\n-Neighbor generation ID\n-Neighbor propagation delay (msec)\n-Neighbor override interval (msec)\n-Neighbor LAN prune delay T-bit\n-Neighbor secondary addresses\n-clear ip bgp A.B.C.D encap unicast soft\n+clear bgp ipv6 <1-4294967295> out\n Reset functions\n-IP information\n BGP information\n-BGP neighbor address to clear\n Address family\n-Address Family Modifier\n-Soft reconfig\n-distance <1-255> A.B.C.D/M WORD\n-Define an administrative distance\n-Administrative distance\n-IP source prefix\n-Access list name\n-show bgp ipv6 (encap|multicast|unicast|vpn) flap-statistics prefix-list WORD\n+Clear peers with the AS number\n+Resend all outbound updates\n+clear bgp ipv6 <1-4294967295>\n+Reset functions\n+BGP information\n+Address family\n+Clear peers with the AS number\n+show ip bgp ipv4 (unicast|multicast) community\n Show running system information\n+IP information\n BGP information\n+Address family\n+Address Family modifier\n+Address Family modifier\n+Display routes matching the communities\n+no distance <1-255> X:X::X:X/M WORD\n+show ipv6 ospf6 database * A.B.C.D\n+Show running system information\n IPv6 information\n+Open Shortest Path First (OSPF) for IPv6\n+Display Link state database\n+Any Link state Type\n+Specify Link state ID as IPv4 address notation\n+clear ip bgp * ipv4 (unicast|multicast) soft\n+Reset functions\n+IP information\n+BGP information\n+Clear all peers\n+Address family\n Address Family Modifier\n Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Display flap statistics of routes\n-Display routes conforming to the prefix-list\n-IP prefix-list name\n-pce neighbor as <0-65535>\n-PCE Router Information specific commands\n-Configure PCE neighbor domain AS number\n-AS number of PCE neighbors\n-AS number in decimal <0-65535>\n-show ip bgp large-community\n-Show running system information\n+Soft reconfig inbound and outbound updates\n+clear ip bgp <1-4294967295> vpnv4 unicast soft\n+Reset functions\n IP information\n BGP information\n-Display routes matching the large-communities\n-match ip next-hop prefix-list WORD\n-Match values from routing table\n-IP information\n-Match next-hop address of route\n-Match entries of prefix-lists\n-IP prefix-list name\n-no ip route A.B.C.D/M (A.B.C.D|INTERFACE|null0) vrf <0-65535>\n+Clear peers with the AS number\n+Address family\n+Address Family Modifier\n+Soft reconfig inbound and outbound updates\n+no network A.B.C.D/M backdoor\n Negate a command or set its defaults\n+Specify a network to announce via BGP\n+IP prefix /, e.g., 35.0.0.0/8\n+Specify a BGP backdoor route\n+show bgp view WORD neighbors (A.B.C.D|X:X::X:X) dampened-routes\n+Show running system information\n+BGP information\n+BGP view\n+View name\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display the dampened routes received from neighbor\n+ip ospf authentication (null|message-digest) A.B.C.D\n+IP Information\n+OSPF interface commands\n+Enable authentication on this interface\n+Use null authentication\n+Use message-digest authentication\n+Address of interface\n+undebug bgp zebra\n+Disable debugging functions (see also 'debug')\n+BGP information\n+BGP Zebra messages\n+show bgp view WORD ipv6 X:X::X:X\n+Show running system information\n+BGP information\n+BGP view\n+View name\n+Address family\n+Network in the BGP routing table to display\n+ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE|null0) <1-255> vrf <0-65535>\n IP information\n Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n+IP destination prefix\n+IP destination prefix mask\n IP gateway address\n IP gateway interface name\n Null interface\n+Distance value for this route\n Specify the VRF\n The VRF ID\n-debug isis update-packets\n+no debug ospf6 interface\n+Negate a command or set its defaults\n Debugging functions (see also 'undebug')\n-IS-IS information\n-IS-IS Update related packets\n-bgp bestpath med (confed|missing-as-worst)\n-BGP specific commands\n-Change the default bestpath selection\n-MED attribute\n-Compare MED among confederation paths\n-Treat missing MED as the least preferred one\n-show ip bgp ipv4 (unicast|multicast) neighbors (A.B.C.D|X:X::X:X) prefix-counts\n+Open Shortest Path First (OSPF) for IPv6\n+Debug OSPFv3 Interface\n+distance <1-255> X:X::X:X/M WORD\n+Administrative distance\n+Distance value\n+IP source prefix\n+Access list name\n+timers throttle lsa all <0-5000>\n+Adjust routing timers\n+Throttling adaptive timer\n+LSA delay between transmissions\n+Negate a command or set its defaults\n+Delay (msec) between sending LSAs\n+undebug bgp nht\n+Disable debugging functions (see also 'debug')\n+BGP information\n+BGP next-hop tracking updates\n+no allow-ecmp\n+Negate a command or set its defaults\n+Allow Equal Cost MultiPath\n+no default-information originate\n+Negate a command or set its defaults\n+Default route information\n+Distribute default route\n+show ip bgp ipv4 (unicast|multicast) large-community (AA:BB:CC) (AA:BB:CC)\n Show running system information\n IP information\n BGP information\n Address family\n Address Family modifier\n Address Family modifier\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display detailed prefix count information\n-no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (authentication|) (message-digest-key|)\n-Negate a command or set its defaults\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Configure a virtual link\n-Router ID of the remote ABR\n-Enable authentication on this virtual link\n-dummy string \n-Message digest authentication password (key)\n-dummy string \n-Use MD5 algorithm\n-The OSPF password (key)\n-no ipv6 route X:X::X:X/M X:X::X:X INTERFACE (reject|blackhole)\n-Negate a command or set its defaults\n-IP information\n-Establish static routes\n-IPv6 destination prefix (e.g. 3ffe:506::/32)\n-IPv6 gateway address\n-IPv6 gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-show bgp large-community (AA:BB:CC)\n-Show running system information\n-BGP information\n Display routes matching the large-communities\n large-community number\n-no ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole)\n-Negate a command or set its defaults\n-IP information\n-Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n-IP gateway address\n-IP gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-show bgp ipv4 (encap|multicast|unicast|vpn) neighbors (A.B.C.D|X:X::X:X) received prefix-filter\n+large-community number\n+show bgp memory\n Show running system information\n BGP information\n+Global BGP memory statistics\n+match ip route-source (<1-199>|<1300-2699>|WORD)\n+Match values from routing table\n IP information\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display information received from a BGP neighbor\n-Display the prefixlist filter\n-neighbor (A.B.C.D|X:X::X:X|WORD) route-reflector-client\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Configure a neighbor as Route Reflector client\n-show ipv6 prefix-list summary\n-Show running system information\n-IPv6 information\n-Build a prefix list\n-Summary of prefix lists\n-show bgp ipv4 vpn rd ASN:nn_or_IP-address:nn\n-no neighbor (A.B.C.D|X:X::X:X) interface WORD\n-Negate a command or set its defaults\n-Specify neighbor router\n-Neighbor address\n-IPv6 address\n-Interface\n-Interface name\n-show ip bgp view WORD A.B.C.D/M\n+Match advertising source address of route\n+IP access-list number\n+IP access-list number (expanded range)\n+IP standard access-list name\n+show ip bgp flap-statistics route-map WORD\n Show running system information\n IP information\n BGP information\n-BGP view\n-View name\n-IP prefix /, e.g., 35.0.0.0/8\n-show ipv6 ospf6 interface IFNAME\n-Show running system information\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Interface information\n-Interface name(e.g. ep0)\n-no ip large-community-list <100-500> (deny|permit) .LINE\n+Display flap statistics of routes\n+Display routes matching the route-map\n+A route-map to match on\n+no debug bgp allow-martians\n Negate a command or set its defaults\n-IP information\n-Add a large community list entry\n-Large Community list number (expanded)\n-Specify large community to reject\n-Specify large community to accept\n-An ordered list as a regular-expression\n-show ip bgp community-list (<1-500>|WORD) exact-match\n-Show running system information\n-IP information\n+Debugging functions (see also 'undebug')\n BGP information\n-Display routes matching the community-list\n-community-list number\n-community-list name\n+BGP allow martian next hops\n+show ipv6 mbgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n+Show running system information\n+IPv6 information\n+MBGP information\n+Display routes matching the communities\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n Exact match of the communities\n-no ipv6 nd ra-interval\n+access-list WORD (deny|permit) A.B.C.D/M exact-match\n+Add an access list entry\n+IP zebra access-list name\n+Specify packets to reject\n+Specify packets to forward\n+Prefix to match. e.g. 10.0.0.0/8\n+Exact match of the prefixes\n+no isis psnp-interval <1-120> level-1\n Negate a command or set its defaults\n-Interface IPv6 config commands\n-Neighbor discovery\n-Router Advertisement interval\n+IS-IS commands\n+Set PSNP interval in seconds\n+PSNP interval value\n+Specify interval for level-1 PSNPs\n no net WORD\n Negate a command or set its defaults\n A Network Entity Title for this process (OSI only)\n XX.XXXX. ... .XXX.XX Network entity title (NET)\n-no network A.B.C.D/M area (A.B.C.D|<0-4294967295>)\n-Negate a command or set its defaults\n-Enable routing on an IP network\n-OSPF network prefix\n-Set the OSPF area ID\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-debug ospf6 abr\n-Debugging functions (see also 'undebug')\n-Open Shortest Path First (OSPF) for IPv6\n-Debug OSPFv3 ABR function\n-show bgp ipv4 (encap|multicast|unicast|vpn) dampening flap-statistics cidr-only\n-Show running system information\n-BGP information\n-Address Family\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Display detailed information about dampening\n-Display flap statistics of routes\n-Display only routes with non-natural netmasks\n-no set ipv6 next-hop global X:X::X:X\n-Negate a command or set its defaults\n-Set values in destination routing protocol\n-IPv6 information\n-IPv6 next-hop address\n-IPv6 global address\n-IPv6 address of next hop\n-no ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE|null0)\n+no ipv6 route X:X::X:X/M X:X::X:X INTERFACE tag <1-4294967295>vrf <0-65535>\n Negate a command or set its defaults\n IP information\n Establish static routes\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n+Set tag for this route\n+Tag value\n+Specify the VRF\n+The VRF ID\n+ip irdp debug disable\n+ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole) tag <1-4294967295>\n+IP information\n+Establish static routes\n IP destination prefix\n IP destination prefix mask\n IP gateway address\n IP gateway interface name\n-Null interface\n-show ip nht\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Set tag for this route\n+Tag value\n+no bgp cluster-id A.B.C.D\n+Negate a command or set its defaults\n+BGP information\n+Configure Route-Reflector Cluster-id\n+Route-Reflector Cluster-id in IP address format\n+show ip bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n Show running system information\n IP information\n-IP nexthop tracking table\n-ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) <1-255> vrf <0-65535>\n-IP information\n-Establish static routes\n-IPv6 destination prefix (e.g. 3ffe:506::/32)\n-IPv6 gateway address\n-IPv6 gateway interface name\n-Distance value for this prefix\n-Specify the VRF\n-The VRF ID\n-show bgp ipv6 community (AA:NN|local-AS|no-advertise|no-export)\n+BGP information\n+Display routes matching the communities\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+show bgp ipv4 community (AA:NN|local-AS|no-advertise|no-export) exact-match\n Show running system information\n BGP information\n-Address family\n+IP information\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-access-list (<100-199>|<2000-2699>) (deny|permit) ip host A.B.C.D A.B.C.D A.B.C.D\n-Add an access list entry\n-IP extended access list\n-IP extended access list (expanded range)\n-Specify packets to reject\n-Specify packets to forward\n-Any Internet Protocol\n-A single source host\n-Source address\n-Destination address\n-Destination Wildcard bits\n-show ipv6 bgp large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n+Exact match of the communities\n+show bgp view WORD summary\n Show running system information\n-IPv6 information\n BGP information\n-Display routes matching the large-communities\n-large-community number\n-large-community number\n-large-community number\n-large-community number\n-no ip rip send version\n+BGP view\n+View name\n+Summary of BGP neighbor status\n+no router bgp <1-4294967295>\n Negate a command or set its defaults\n-IP information\n-Routing Information Protocol\n-Advertisement transmission\n-Version control\n-show ip rpf vrf <0-65535>\n+Enable a routing process\n+BGP information\n+AS number\n+show bgp ipv6 vpn neighbors (A.B.C.D|X:X::X:X) routes\n Show running system information\n+BGP information\n+Address Family\n+Display VPN NLRI specific information\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display routes learned from neighbor\n+ip route A.B.C.D A.B.C.D (reject|blackhole) tag <1-4294967295> <1-255>\n IP information\n-Display RPF information for multicast source\n-Specify the VRF\n-The VRF ID\n-show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) A.B.C.D A.B.C.D\n+Establish static routes\n+IP destination prefix\n+IP destination prefix mask\n+Set tag for this route\n+Tag value\n+Distance value for this route\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+clear bgp (A.B.C.D|X:X::X:X) out\n+Reset functions\n+BGP information\n+BGP neighbor address to clear\n+BGP IPv6 neighbor to clear\n+Resend all outbound updates\n+no ip large-community-list expanded WORD\n+Negate a command or set its defaults\n+IP information\n+Add a large community list entry\n+Specify expanded large-community-list\n+Large Community list name\n+clear bgp ipv6 external\n+Reset functions\n+BGP information\n+Address family\n+Clear all external peers\n+ip irdp address A.B.C.D preference <0-2147483647>\n+IP information\n+Alter ICMP Router discovery preference this interface\n+Specify IRDP non-default preference to advertise\n+Set IRDP address for advertise\n+Preference level\n+vrf <1-65535> netns NAME\n+Enable a VRF\n+Specify the VRF identifier\n+Associate with a NETNS\n+The file name in /var/run/netns, or a full pathname\n+show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) adv-router A.B.C.D linkstate-id A.B.C.D\n Show running system information\n IPv6 information\n Open Shortest Path First (OSPF) for IPv6\n Display Link state database\n Display Router LSAs\n Display Network LSAs\n Display Inter-Area-Prefix LSAs\n Display Inter-Area-Router LSAs\n Display As-External LSAs\n Display Group-Membership LSAs\n Display Type-7 LSAs\n Display Link LSAs\n Display Intra-Area-Prefix LSAs\n-Specify Link state ID as IPv4 address notation\n+Search by Advertising Router\n Specify Advertising Router as IPv4 address notation\n-show bgp ipv4 encap rd ASN:nn_or_IP-address:nn neighbors (A.B.C.D|X:X::X:X) advertised-routes\n+Search by Link state ID\n+Specify Link state ID as IPv4 address notation\n+show ip ospf database (asbr-summary|external|network|router|summary|nssa-external|opaque-link|opaque-area|opaque-as) A.B.C.D\n+Show running system information\n+IP information\n+OSPF information\n+Database summary\n+ASBR summary link states\n+External link states\n+Network link states\n+Router link states\n+Network summary link states\n+NSSA external link state\n+Link local Opaque-LSA\n+Link area Opaque-LSA\n+Link AS Opaque-LSA\n+Link State ID (as an IP address)\n+show bgp ipv6 encap rd ASN:nn_or_IP-address:nn\n Show running system information\n BGP information\n Address Family\n Display ENCAP NLRI specific information\n Display information for a route distinguisher\n ENCAP Route Distinguisher\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display the routes advertised to a BGP neighbor\n-show ip bgp community (AA:NN|local-AS|no-advertise|no-export) exact-match\n+Display BGP tags for prefixes\n+show bgp ipv4 (unicast|multicast) summary\n Show running system information\n-IP information\n BGP information\n+Address family\n+Address Family modifier\n+Address Family modifier\n+Summary of BGP neighbor status\n+show bgp ipv6 (encap|multicast|unicast|vpn) community (AA:NN|local-AS|no-advertise|no-export)\n+Show running system information\n+BGP information\n+Address family\n+Address family modifier\n+Address family modifier\n+Address family modifier\n+Address family modifier\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-Exact match of the communities\n-ip rip split-horizon poisoned-reverse\n-IP information\n-Routing Information Protocol\n-Perform split horizon\n-With poisoned-reverse\n-show ipv6 ospf6 database (detail|dump|internal)\n-Show running system information\n-IPv6 information\n-Open Shortest Path First (OSPF) for IPv6\n-Display Link state database\n-Display details of LSAs\n-Dump LSAs\n-Display LSA's internal information\n-default-information originate {always|metric <0-16777214>|metric-type (1|2)|route-map WORD}\n-Control distribution of default information\n-Distribute a default route\n-Always advertise default route\n-OSPF default metric\n-OSPF metric\n-OSPF metric type for default routes\n-Set OSPF External Type 1 metrics\n-Set OSPF External Type 2 metrics\n-Route map reference\n-Pointer to route-map entries\n-ip igmp query-max-response-time-dsec <10-250>\n-IP information\n-Enable IGMP operation\n-IGMP max query response value (deciseconds)\n-Query response value in deciseconds\n-clear bgp ipv6 (A.B.C.D|X:X::X:X) in\n-Reset functions\n-BGP information\n-Address family\n-BGP neighbor address to clear\n-BGP IPv6 neighbor to clear\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-isis circuit-type (level-1|level-1-2|level-2-only)\n-IS-IS commands\n-Configure circuit type for interface\n-Level-1 only adjacencies are formed\n-Level-1-2 adjacencies are formed\n-Level-2 only adjacencies are formed\n-debug rip events\n-Debugging functions (see also 'undebug')\n-RIP information\n-RIP events\n-no neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged med (as-path|next-hop)\n-Negate a command or set its defaults\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-BGP attribute is propagated unchanged to this neighbor\n-Med attribute\n-As-path attribute\n-Nexthop attribute\n-mpls-te on\n-MPLS-TE specific commands\n-Enable the MPLS-TE functionality\n-no ipv6 nd reachable-time\n-Negate a command or set its defaults\n-Interface IPv6 config commands\n-Neighbor discovery\n-Reachable time\n-debug zebra rib queue\n-Debugging functions (see also 'undebug')\n-Zebra configuration\n-Debug RIB events\n-Debug RIB queueing\n-no ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole) tag <1-4294967295>\n+aggregate-address A.B.C.D/M as-set summary-only\n+Configure BGP aggregate entries\n+Aggregate prefix\n+Generate AS set path information\n+Filter more specific routes from updates\n+no ip route A.B.C.D A.B.C.D (reject|blackhole) vrf <0-65535>\n Negate a command or set its defaults\n IP information\n Establish static routes\n IP destination prefix\n IP destination prefix mask\n-IP gateway address\n-IP gateway interface name\n Emit an ICMP unreachable when matched\n Silently discard pkts when matched\n-Tag of this route\n-Tag value\n-clear bgp ipv6 <1-4294967295> out\n+Specify the VRF\n+The VRF ID\n+no neighbor A.B.C.D\n+Negate a command or set its defaults\n+Specify neighbor router\n+Neighbor IP address\n+clear ip bgp <1-4294967295>\n Reset functions\n+IP information\n BGP information\n-Address family\n Clear peers with the AS number\n-Resend all outbound updates\n-ipv6 ospf6 cost <1-65535>\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Interface cost\n-Outgoing metric of this interface\n-set as-path exclude .<1-4294967295>\n-Set values in destination routing protocol\n-Transform BGP AS-path attribute\n-Exclude from the as-path\n-AS number\n-ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole) tag <1-4294967295>vrf <0-65535>\n+no ip route A.B.C.D/M (reject|blackhole)\n+Negate a command or set its defaults\n IP information\n Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n-IP gateway address\n-IP gateway interface name\n+IP destination prefix (e.g. 10.0.0.0/8)\n Emit an ICMP unreachable when matched\n Silently discard pkts when matched\n-Set tag for this route\n-Tag value\n-Specify the VRF\n-The VRF ID\n-ospf transmit-delay <1-65535>\n-OSPF interface commands\n-Link state transmit delay\n-max-metric router-lsa administrative\n-OSPF maximum / infinite-distance metric\n-Advertise own Router-LSA with infinite distance (stub router)\n-Administratively applied, for an indefinite period\n-no neighbor (A.B.C.D|X:X::X:X|WORD) ebgp-multihop\n+test igmp receive report <0-65535> A.B.C.D <1-6> .LINE\n+Test IGMP protocol\n+Test IGMP message\n+Test IGMP report\n+IGMP group address\n+Record type\n+clear ip bgp A.B.C.D ipv4 (unicast|multicast) soft\n+Reset functions\n+IP information\n+BGP information\n+BGP neighbor address to clear\n+Address family\n+Address Family Modifier\n+Address Family Modifier\n+Soft reconfig inbound and outbound updates\n+aggregate-address A.B.C.D A.B.C.D as-set summary-only\n+Configure BGP aggregate entries\n+Aggregate address\n+Aggregate mask\n+Generate AS set path information\n+Filter more specific routes from updates\n+no match community\n Negate a command or set its defaults\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Allow EBGP neighbors not on directly connected networks\n-no timers lsa arrival\n+Match values from routing table\n+Match BGP community list\n+no isis hello-multiplier <2-100> level-1\n Negate a command or set its defaults\n-Adjust routing timers\n-Throttling link state advertisement delays\n-OSPF minimum arrival interval delay\n-show bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n+IS-IS commands\n+Set multiplier for Hello holding time\n+Hello multiplier value\n+Specify hello multiplier for level-1 IIHs\n+no distance <1-255>\n+Negate a command or set its defaults\n+Administrative distance\n+Distance value\n+ip rip authentication mode (md5|text) auth-length (rfc|old-ripd)\n+IP information\n+Routing Information Protocol\n+Authentication control\n+Authentication mode\n+Keyed message digest\n+Clear text authentication\n+MD5 authentication data length\n+RFC compatible\n+Old ripd compatible\n+set-overload-bit\n+Set overload bit to avoid any transit traffic\n+Set overload bit\n+bgp router-id A.B.C.D\n+BGP information\n+Override configured router identifier\n+Manually configured router identifier\n+show bgp ipv4 vpn\n+Show running system information\n+BGP information\n+Address Family\n+Display VPN NLRI specific information\n+show bgp ipv6 community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n Show running system information\n BGP information\n Address family\n-Address Family modifier\n-Address Family modifier\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n Exact match of the communities\n-timers throttle spf <0-600000> <0-600000> <0-600000>\n-Adjust routing timers\n-Throttling adaptive timer\n-OSPF SPF timers\n-Delay (msec) from first change received till SPF calculation\n-Initial hold time (msec) between consecutive SPF calculations\n-Maximum hold time (msec)\n-area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (authentication|) (message-digest-key|) <1-255> md5 KEY\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Configure a virtual link\n-Router ID of the remote ABR\n-Enable authentication on this virtual link\n-dummy string \n-Message digest authentication password (key)\n-dummy string \n-Use MD5 algorithm\n-The OSPF password (key)\n-debug isis checksum-errors\n-Debugging functions (see also 'undebug')\n-IS-IS information\n-IS-IS LSP checksum errors\n-no ipv6 ospf6 cost\n-Negate a command or set its defaults\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Calculate interface cost from bandwidth\n-access-list (<100-199>|<2000-2699>) (deny|permit) ip A.B.C.D A.B.C.D A.B.C.D A.B.C.D\n-Add an access list entry\n-IP extended access list\n-IP extended access list (expanded range)\n-Specify packets to reject\n-Specify packets to forward\n-Any Internet Protocol\n-Source address\n-Source wildcard bits\n-Destination address\n-Destination Wildcard bits\n-isis metric <0-16777215> level-2\n-IS-IS commands\n-Set default metric for circuit\n-Default metric value\n-Specify metric for level-2 routing\n-no ip route A.B.C.D/M (A.B.C.D|INTERFACE|null0) <1-255> vrf <0-65535>\n-Negate a command or set its defaults\n-IP information\n-Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n-IP gateway address\n-IP gateway interface name\n-Null interface\n-Distance value for this route\n-Specify the VRF\n-The VRF ID\n-show ip bgp large-community (AA:BB:CC) (AA:BB:CC)\n-Show running system information\n-IP information\n-BGP information\n-Display routes matching the large-communities\n-large-community number\n-large-community number\n-Negate a command or set its defaults\n-Administrative distance\n-Distance value\n-IP source prefix\n-Access list name\n-mpls-te inter-as area (A.B.C.D|<0-4294967295>)\n-MPLS-TE specific commands\n-Configure MPLS-TE Inter-AS support\n-AREA native mode self originate INTER_AS LSA with Type 10 (area flooding scope)\n-OSPF area ID in IP format\n-OSPF area ID as decimal value\n-set metric <0-4294967295>\n-Set value\n-Metric value for destination routing protocol\n-Metric value\n-no set ip next-hop\n-Negate a command or set its defaults\n-Set values in destination routing protocol\n-IP information\n-Next hop address\n-clear bgp ipv6 (A.B.C.D|X:X::X:X) out\n+clear ipv6 prefix-list WORD\n Reset functions\n-BGP information\n-Address family\n-BGP neighbor address to clear\n-BGP IPv6 neighbor to clear\n-Resend all outbound updates\n-no dump bgp (all|updates|routes-mrt) [PATH] [INTERVAL]\n-Negate a command or set its defaults\n-Stop dump packet\n-Stop BGP packet dump\n-Stop dump process all/all-et\n-Stop dump process updates/updates-et\n-Stop dump process route-mrt\n-show ip pim interface\n+IPv6 information\n+Build a prefix list\n+Name of a prefix list\n+show ipv6 mbgp summary\n Show running system information\n-IP information\n-PIM information\n-PIM interface information\n-no ip pim ssm\n-Negate a command or set its defaults\n-IP information\n-PIM information\n-Enable PIM SSM operation\n-ip route A.B.C.D A.B.C.D (reject|blackhole) <1-255> vrf <0-65535>\n+IPv6 information\n+MBGP information\n+Summary of BGP neighbor status\n+ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole) tag <1-4294967295>vrf <0-65535>\n IP information\n Establish static routes\n IP destination prefix\n IP destination prefix mask\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Distance value for this route\n-Specify the VRF\n-The VRF ID\n-no debug bgp nht\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-BGP information\n-BGP nexthop tracking events\n-show ip mroute\n-Show running system information\n-IP information\n-IP multicast routing table\n-no debug bgp allow-martians\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-BGP information\n-BGP allow martian next hops\n-no ipv6 route X:X::X:X/M X:X::X:X INTERFACE (reject|blackhole) tag <1-4294967295>\n-Negate a command or set its defaults\n-IP information\n-Establish static routes\n-IPv6 destination prefix (e.g. 3ffe:506::/32)\n-IPv6 gateway address\n-IPv6 gateway interface name\n+IP gateway address\n+IP gateway interface name\n Emit an ICMP unreachable when matched\n Silently discard pkts when matched\n Set tag for this route\n Tag value\n-show ip rpf A.B.C.D vrf <0-65535>\n+Specify the VRF\n+The VRF ID\n+show ip route supernets-only vrf <0-65535>\n Show running system information\n IP information\n-Display RPF information for multicast source\n-IP multicast source address (e.g. 10.0.0.0)\n+IP routing table\n+Show supernet entries only\n Specify the VRF\n The VRF ID\n-no neighbor (A.B.C.D|X:X::X:X|WORD) timers\n-Negate a command or set its defaults\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-BGP per neighbor timers\n-neighbor A.B.C.D priority <0-255> poll-interval <1-65535>\n-Specify neighbor router\n-Neighbor IP address\n-Neighbor Priority\n-Priority\n-Dead Neighbor Polling interval\n-debug isis lsp-sched\n-Debugging functions (see also 'undebug')\n-IS-IS information\n-IS-IS scheduling of LSP generation\n-no maximum-paths ibgp\n-Negate a command or set its defaults\n-Forward packets over multiple paths\n-iBGP-multipath\n-Number of paths\n-show bgp ipv4 (unicast|multicast) rsclient summary\n-Show running system information\n+clear ip bgp dampening A.B.C.D A.B.C.D\n+Reset functions\n+IP information\n BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Information about Route Server Clients\n-Summary of all Route Server Clients\n-no area (A.B.C.D|<0-4294967295>) stub\n-Negate a command or set its defaults\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Configure OSPF area as stub\n-show bgp ipv4 cidr-only\n+Clear route flap dampening information\n+Network to clear damping information\n+Network mask\n+ip irdp preference <0-2147483647>\n+IP information\n+ICMP Router discovery on this interface\n+Set default preference level for this interface\n+Preference level\n+show ipv6 mbgp\n Show running system information\n-BGP information\n IP information\n-Display only routes with non-natural netmasks\n-no debug zebra nht\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-Zebra configuration\n-Debug option set for zebra next hop tracking\n-no isis hello-interval\n-Negate a command or set its defaults\n-IS-IS commands\n-Set Hello interval\n-no ipv6 nd router-preference (high|medium|low)\n-Negate a command or set its defaults\n-Interface IPv6 config commands\n-Neighbor discovery\n-Default router preference\n-High default router preference\n-Low default router preference\n-Medium default router preference (default)\n-show bgp view WORD rsclient summary\n+MBGP information\n+show bgp paths\n Show running system information\n BGP information\n-BGP view\n-View name\n-Information about Route Server Clients\n-Summary of all Route Server Clients\n-show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) adv-router A.B.C.D linkstate-id A.B.C.D (dump|internal)\n-Show running system information\n-IPv6 information\n-Open Shortest Path First (OSPF) for IPv6\n-Display Link state database\n-Display Router LSAs\n-Display Network LSAs\n-Display Inter-Area-Prefix LSAs\n-Display Inter-Area-Router LSAs\n-Display As-External LSAs\n-Display Group-Membership LSAs\n-Display Type-7 LSAs\n-Display Link LSAs\n-Display Intra-Area-Prefix LSAs\n-Search by Advertising Router\n-Specify Advertising Router as IPv4 address notation\n-Search by Link state ID\n-Specify Link state ID as IPv4 address notation\n-Dump LSAs\n-Display LSA's internal information\n-no ipv6 ospf6 ifmtu\n+Path information\n+ip ospf authentication-key AUTH_KEY A.B.C.D\n+IP Information\n+OSPF interface commands\n+Authentication password (key)\n+The OSPF password (key)\n+Address of interface\n+no ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE|null0)\n Negate a command or set its defaults\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Interface MTU\n-passive-interface default\n-Suppress routing updates on an interface\n-Suppress routing updates on interfaces by default\n-ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE|null0) tag <1-4294967295>\n IP information\n Establish static routes\n IP destination prefix\n IP destination prefix mask\n IP gateway address\n IP gateway interface name\n Null interface\n-Set tag for this route\n-Tag value\n-show ip bgp view WORD summary\n+show ip bgp route-map WORD\n Show running system information\n IP information\n BGP information\n+Display routes matching the route-map\n+A route-map to match on\n+no ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole) vrf <0-65535>\n+Negate a command or set its defaults\n+IP information\n+Establish static routes\n+IP destination prefix (e.g. 10.0.0.0/8)\n+IP gateway address\n+IP gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Specify the VRF\n+The VRF ID\n+show bgp view WORD X:X::X:X\n+Show running system information\n+BGP information\n BGP view\n View name\n-Summary of BGP neighbor status\n-ip irdp preference <0-2147483647>\n-IP information\n-ICMP Router discovery on this interface\n-Set default preference level for this interface\n-Preference level\n-set community .AA:NN\n-Set values in destination routing protocol\n-BGP community attribute\n-Community number in aa:nn format or local-AS|no-advertise|no-export|internet or additive\n-no area A.B.C.D import-list NAME\n-OSPFv6 area parameters\n-OSPFv6 area ID in IP address format\n-Unset the filter for networks announced to other areas\n-NAme of the access-list\n-show bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n+Network in the BGP routing table to display\n+undebug bgp as4\n+Disable debugging functions (see also 'debug')\n+BGP information\n+BGP AS4 actions\n+show bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n Show running system information\n BGP information\n+Address family\n+Address Family modifier\n+Address Family modifier\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n@@ -5973,866 +5264,893 @@\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-ip nhrp mtu (<576-1500>|opennhrp)\n-IP information\n-Next Hop Resolution Protocol functions\n-Configure NHRP advertised MTU\n-MTU value\n-Advertise bound interface MTU similar to OpenNHRP\n-no ip multicast rpf-lookup-mode (urib-only|mrib-only|mrib-then-urib|lower-distance|longer-prefix)\n-Negate a command or set its defaults\n-IP information\n-Multicast options\n-RPF lookup behavior\n-Lookup in unicast RIB only\n-Lookup in multicast RIB only\n-Try multicast RIB first, fall back to unicast RIB\n-Lookup both, use entry with lower distance\n-Lookup both, use entry with longer prefix\n-redistribute (kernel|connected|static|ripng|isis|bgp|babel|nhrp)\n-Redistribute\n-Kernel routes (not installed via the zebra RIB)\n-Connected routes (directly attached subnet or host)\n-Statically configured routes\n-Routing Information Protocol next-generation (IPv6) (RIPng)\n-Intermediate System to Intermediate System (IS-IS)\n-Border Gateway Protocol (BGP)\n-Babel routing protocol (Babel)\n-Next Hop Resolution Protocol (NHRP)\n-no ip igmp query-max-response-time\n-Negate a command or set its defaults\n-IP information\n-Enable IGMP operation\n-IGMP max query response value (seconds)\n+show ipv6 mbgp prefix-list WORD\n+Show running system information\n+IPv6 information\n+MBGP information\n+Display routes matching the prefix-list\n+IPv6 prefix-list name\n+show ipv6 prefix-list WORD X:X::X:X/M longer\n+Show running system information\n+IPv6 information\n+Build a prefix list\n+Name of a prefix list\n+IPv6 prefix /, e.g., 3ffe::/16\n+Lookup longer prefix\n+show bgp ipv6 vpn X:X::X:X\n+Show running system information\n+BGP information\n+Address Family\n+Display VPN NLRI specific information\n+Network in the BGP routing table to display\n+area A.B.C.D range X:X::X:X/M\n+OSPF area parameters\n+Area ID (as an IPv4 notation)\n+Configured address range\n+Specify IPv6 prefix\n+exec-timeout <0-35791>\n+Set timeout value\n+Timeout value in minutes\n+no network A.B.C.D/M\n Negate a command or set its defaults\n Specify a network to announce via BGP\n IP prefix /, e.g., 35.0.0.0/8\n-Specify Route Distinguisher\n-VPN Route Distinguisher\n-tag value\n-undebug pim\n-Disable debugging functions (see also 'debug')\n-PIM protocol activity\n-Negate a command or set its defaults\n-Route-map comment\n-show bgp ipv6 (encap|multicast|unicast|vpn) neighbors (A.B.C.D|X:X::X:X) received prefix-filter\n-neighbor (A.B.C.D|X:X::X:X|WORD) local-as <1-4294967295>\n-Specify neighbor router\n+default-information originate (ipv4|ipv6) (level-1|level-2) {always|metric <0-16777215>|route-map WORD}\n+Control distribution of default information\n+Distribute a default route\n+Distribute default route for IPv4\n+Distribute default route for IPv6\n+Distribute default route into level-1\n+Distribute default route into level-2\n+Always advertise default route\n+Metric for default route\n+ISIS default metric\n+Route map reference\n+Pointer to route-map entries\n+show bgp view WORD rsclient (A.B.C.D|X:X::X:X)\n+Show running system information\n+BGP information\n+BGP view\n+View name\n+Information about Route Server Client\n Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Specify a local-as number\n-AS number used as local AS\n-fpm connection ip A.B.C.D port <1-65535>\n-fpm connection remote ip and port\n-Remote fpm server ip A.B.C.D\n-Enter ip \n-no bgp enforce-first-as\n+IPv6 address\n+no debug ospf6 zebra\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+Open Shortest Path First (OSPF) for IPv6\n+Debug connection between zebra\n+no debug rip zebra\n Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+RIP information\n+RIP and ZEBRA communication\n+isis csnp-interval <1-600> level-2\n+IS-IS commands\n+Set CSNP interval in seconds\n+CSNP interval value\n+Specify interval for level-2 CSNPs\n+show bgp view WORD (ipv4|ipv6) (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export)\n+Show running system information\n BGP information\n-Enforce the first AS for EBGP routes\n-Adjust routing timers\n-Throttling adaptive timer\n-OSPF6 SPF timers\n-Delay (msec) from first change received till SPF calculation\n-Initial hold time (msec) between consecutive SPF calculations\n-Maximum hold time (msec)\n-show ip bgp flap-statistics A.B.C.D/M longer-prefixes\n+BGP view\n+View name\n+Address family\n+Address family\n+Address family modifier\n+Address family modifier\n+Display routes matching the communities\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+no bgp bestpath as-path multipath-relax\n+Negate a command or set its defaults\n+BGP specific commands\n+Change the default bestpath selection\n+AS-path attribute\n+Allow load sharing across routes that have different AS paths (but same length)\n+no ospf priority\n+Negate a command or set its defaults\n+OSPF interface commands\n+Router priority\n+bgp bestpath as-path confed\n+BGP specific commands\n+Change the default bestpath selection\n+AS-path attribute\n+Compare path lengths including confederation sets & sequences in selecting a route\n+show ip bgp dampening flap-statistics filter-list WORD\n Show running system information\n IP information\n BGP information\n+Display detailed information about dampening\n Display flap statistics of routes\n-IP prefix /, e.g., 35.0.0.0/8\n-Display route and more specific routes\n-ospf cost <1-65535>\n-show ip bgp ipv4 (unicast|multicast) dampening parameters\n+Display routes conforming to the filter-list\n+Regular expression access list name\n+pce neighbor as <0-65535>\n+PCE Router Information specific commands\n+Configure PCE neighbor domain AS number\n+AS number of PCE neighbors\n+AS number in decimal <0-65535>\n+show ip bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n Show running system information\n IP information\n BGP information\n Address family\n Address Family modifier\n Address Family modifier\n-Display detailed information about dampening\n-Display detail of configured dampening parameters\n-delay <0-16777215> min <0-16777215> max <0-16777215>\n-Unidirectional Average Link Delay (optionally Minimum and Maximum delays)\n-Average delay in micro-second as decimal (0...16777215)\n-Minimum delay\n-Minimum delay in micro-second as decimal (0...16777215)\n-Maximum delay\n-Maximum delay in micro-second as decimal (0...16777215)\n-undebug bgp as4 segment\n-Disable debugging functions (see also 'debug')\n-BGP information\n-BGP AS4 actions\n-BGP AS4 aspath segment handling\n-ip irdp debug messages\n-no debug ospf zebra\n+Display routes matching the communities\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-OSPF information\n-OSPF Zebra information\n-clear bgp * rsclient\n-Reset functions\n-BGP information\n-Clear all peers\n-Soft reconfig for rsclient RIB\n-clear ip bgp external ipv4 (unicast|multicast) in prefix-filter\n-Reset functions\n+Control distribution of default route\n+Distribute a default route\n+ip route A.B.C.D/M (A.B.C.D|INTERFACE|null0) tag <1-4294967295>\n IP information\n+Establish static routes\n+IP destination prefix (e.g. 10.0.0.0/8)\n+IP gateway address\n+IP gateway interface name\n+Null interface\n+Set tag for this route\n+Tag value\n+no isis hello-interval <1-600>\n+Negate a command or set its defaults\n+IS-IS commands\n+Set Hello interval\n+Hello interval value\n+Holdtime 1 second, interval depends on multiplier\n+clear bgp ipv6 <1-4294967295> in\n+Reset functions\n BGP information\n-Clear all external peers\n Address family\n-Address Family modifier\n-Address Family modifier\n+Clear peers with the AS number\n Send route-refresh unless using 'soft-reconfiguration inbound'\n-Push out prefix-list ORF and do inbound soft reconfig\n-no max-lsp-lifetime <350-65535>\n+no isis hello-interval <1-600> level-2\n Negate a command or set its defaults\n-Maximum LSP lifetime\n-LSP lifetime in seconds\n-(ip|ipv6) nhrp map (A.B.C.D|X:X::X:X) (A.B.C.D|local)\n-IP information\n-IPv6 information\n-Next Hop Resolution Protocol functions\n-Nexthop Server configuration\n-IPv4 protocol address\n-IPv6 protocol address\n-IPv4 NBMA address\n-Handle protocol address locally\n-redistribute (kernel|connected|static|ripng|ospf6|isis|babel|nhrp)\n-Redistribute information from another routing protocol\n-Kernel routes (not installed via the zebra RIB)\n-Connected routes (directly attached subnet or host)\n-Statically configured routes\n-Routing Information Protocol next-generation (IPv6) (RIPng)\n-Open Shortest Path First (IPv6) (OSPFv3)\n-Intermediate System to Intermediate System (IS-IS)\n-Babel routing protocol (Babel)\n-Next Hop Resolution Protocol (NHRP)\n-show bgp ipv4 vpn rd ASN:nn_or_IP-address:nn neighbors (A.B.C.D|X:X::X:X) routes\n+IS-IS commands\n+Set Hello interval\n+Hello interval value\n+Holdtime 1 second, interval depends on multiplier\n+Specify hello-interval for level-2 IIHs\n+ip ospf retransmit-interval <3-65535>\n+IP Information\n+OSPF interface commands\n+Time between retransmitting lost link state advertisements\n+no timers basic <0-65535> <0-65535> <0-65535>\n+Negate a command or set its defaults\n+RIPng timers setup\n+Basic timer\n+Routing table update timer value in second. Default is 30.\n+Routing information timeout timer. Default is 180.\n+Garbage collection timer. Default is 120.\n+show bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n Show running system information\n BGP information\n-Address Family\n-Address Family modifier\n-Display information for a route distinguisher\n-VPN Route Distinguisher\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Display routes learned from neighbor\n-show ip route A.B.C.D/M vrf <0-65535>\n+Display routes matching the communities\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+Exact match of the communities\n+show ip bgp vpnv4 all neighbors (A.B.C.D|X:X::X:X) prefix-counts\n Show running system information\n IP information\n-IP routing table\n-IP prefix /, e.g., 35.0.0.0/8\n-Specify the VRF\n-The VRF ID\n-clear ip bgp view WORD * soft\n-Reset functions\n-IP information\n BGP information\n-BGP view\n-view name\n-Clear all peers\n-Soft reconfig inbound and outbound updates\n-show bgp ipv6 encap rd ASN:nn_or_IP-address:nn neighbors (A.B.C.D|X:X::X:X) advertised-routes\n-bgp always-compare-med\n-BGP specific commands\n-Allow comparing MED from different neighbors\n-show ip rib A.B.C.D\n+Address family\n+Address Family modifier\n+Address Family modifier\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display detailed prefix count information\n+ip ospf cost <1-65535> A.B.C.D\n+IP Information\n+OSPF interface commands\n+Interface cost\n+Address of interface\n+show ipv6 mbgp large-community-list WORD\n Show running system information\n-IP information\n-IP unicast routing table\n-Unicast address\n-no area (A.B.C.D|<0-4294967295>) range A.B.C.D/M cost <0-16777215>\n-Negate a command or set its defaults\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Summarize routes matching address/mask (border routers only)\n-Area range prefix\n-User specified metric for this range\n-Advertised metric for this range\n-no set large-community\n-Negate a command or set its defaults\n-Set values in destination routing protocol\n-BGP large community attribute\n-Large community\n-no ipv6 nd router-preference\n-Negate a command or set its defaults\n-Interface IPv6 config commands\n-Neighbor discovery\n-Default router preference\n-no ipv6 access-list WORD remark\n-Negate a command or set its defaults\n IPv6 information\n-Add an access list entry\n-IPv6 zebra access-list\n-Access list entry comment\n-no router ospf\n+MBGP information\n+Display routes matching the large-community-list\n+large-community-list name\n+no ip route A.B.C.D/M (A.B.C.D|INTERFACE|null0) <1-255>\n Negate a command or set its defaults\n-Enable a routing process\n-Start OSPF configuration\n-show ip ospf database (asbr-summary|external|network|router|summary|nssa-external|opaque-link|opaque-area|opaque-as) (self-originate|)\n-Show running system information\n IP information\n-OSPF information\n-Database summary\n-ASBR summary link states\n-External link states\n-Network link states\n-Router link states\n-Network summary link states\n-NSSA external link state\n-Link local Opaque-LSA\n-Link area Opaque-LSA\n-Link AS Opaque-LSA\n-Self-originated link states\n-debug ripng zebra\n-Debugging functions (see also 'undebug')\n-RIPng configuration\n-Debug option set for ripng and zebra communication\n-show ip bgp vpnv4 all neighbors (A.B.C.D|X:X::X:X) prefix-counts\n+Establish static routes\n+IP destination prefix (e.g. 10.0.0.0/8)\n+IP gateway address\n+IP gateway interface name\n+Null interface\n+Distance value for this route\n+max-lsp-lifetime level-2 <350-65535>\n+Maximum LSP lifetime for Level 2 only\n+LSP lifetime for Level 2 only in seconds\n no ipv6 nd home-agent-config-flag\n Negate a command or set its defaults\n Interface IPv6 config commands\n Neighbor discovery\n Home Agent configuration flag\n-no neighbor\n-Negate a command or set its defaults\n-Remove Neighbor IP address and AS number for Inter-AS TE\n-show bgp ipv6 large-community (AA:BB:CC) (AA:BB:CC)\n+show ip access-list\n Show running system information\n-BGP information\n-Address family\n-Display routes matching the large-communities\n-large-community number\n-large-community number\n-clear ip bgp A.B.C.D encap unicast soft in\n-Reset functions\n IP information\n-BGP information\n-BGP neighbor address to clear\n-Address family\n-Address Family Modifier\n-Soft reconfig\n-Soft reconfig inbound update\n-show bgp ipv6 neighbors (A.B.C.D|X:X::X:X) advertised-routes\n-Show running system information\n-BGP information\n-Address family\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display the routes advertised to a BGP neighbor\n-bgp network import-check\n+List IP access lists\n+bgp route-reflector allow-outbound-policy\n BGP specific commands\n-BGP network command\n-Check BGP network route exists in IGP\n-no ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole) tag <1-4294967295> <1-255>vrf <0-65535>\n-Negate a command or set its defaults\n+Allow modifications made by out route-map\n+on ibgp neighbors\n+show (ip|ipv6) nhrp (cache|nhs|shortcut|opennhrp|)\n+Show running system information\n IP information\n-Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n-IP gateway address\n-IP gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Tag of this route\n-Tag value\n-Distance value for this route\n-Specify the VRF\n-The VRF ID\n-show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) self-originated linkstate-id A.B.C.D (detail|dump|internal)\n+IPv6 information\n+NHRP information\n+Forwarding cache information\n+Next hop server information\n+Shortcut information\n+opennhrpctl style cache dump\n+clear ip bgp prefix A.B.C.D/M\n+Reset functions\n+IP information\n+BGP information\n+Clear bestpath and re-advertise\n+IP prefix /, e.g., 35.0.0.0/8\n+neighbor (A.B.C.D|X:X::X:X|WORD) ebgp-multihop <1-255>\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Allow EBGP neighbors not on directly connected networks\n+maximum hop count\n+show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) self-originated (detail|dump|internal)\n Show running system information\n IPv6 information\n Open Shortest Path First (OSPF) for IPv6\n Display Link state database\n Display Router LSAs\n Display Network LSAs\n Display Inter-Area-Prefix LSAs\n Display Inter-Area-Router LSAs\n Display As-External LSAs\n Display Group-Membership LSAs\n Display Type-7 LSAs\n Display Link LSAs\n Display Intra-Area-Prefix LSAs\n Display Self-originated LSAs\n-Search by Link state ID\n-Specify Link state ID as IPv4 address notation\n Display details of LSAs\n Dump LSAs\n Display LSA's internal information\n-ip route A.B.C.D/M (A.B.C.D|INTERFACE|null0) vrf <0-65535>\n-IP information\n-Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n-IP gateway address\n-IP gateway interface name\n-Null interface\n-Specify the VRF\n-The VRF ID\n-no set as-path exclude .<1-4294967295>\n+no debug ospf zebra (interface|redistribute)\n Negate a command or set its defaults\n-Set values in destination routing protocol\n-Transform BGP AS_PATH attribute\n-Exclude from the as-path\n-AS number\n-no router bgp <1-4294967295> view WORD\n+Debugging functions (see also 'undebug')\n+OSPF information\n+OSPF Zebra information\n+Zebra interface\n+Zebra redistribute\n+no shutdown\n Negate a command or set its defaults\n-Enable a routing process\n+Shutdown the selected interface\n+max-metric router-lsa on-startup <5-86400>\n+OSPF maximum / infinite-distance metric\n+Advertise own Router-LSA with infinite distance (stub router)\n+Automatically advertise stub Router-LSA on startup of OSPF\n+Time (seconds) to advertise self as stub-router\n+clear bgp * soft in\n+Reset functions\n BGP information\n-AS number\n-BGP view\n-view name\n-spf-interval level-1 <1-120>\n-Minimum interval between SPF calculations\n-Set interval for level 1 only\n-Minimum interval between consecutive SPFs in seconds\n-show bgp (ipv4|ipv6) (encap|multicast|unicast|vpn) statistics\n+Clear all peers\n+Soft reconfig inbound and outbound updates\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+show bgp ipv4 (encap|multicast|unicast|vpn) neighbors (A.B.C.D|X:X::X:X) received-routes\n Show running system information\n BGP information\n Address family\n-Address family\n Address Family modifier\n Address Family modifier\n Address Family modifier\n Address Family modifier\n-BGP RIB advertisement statistics\n-no bgp confederation peers .<1-4294967295>\n-Negate a command or set its defaults\n-BGP specific commands\n-AS confederation parameters\n-Peer ASs in BGP confederation\n-AS number\n-no neighbor (A.B.C.D|X:X::X:X|WORD) description\n-Negate a command or set its defaults\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Neighbor specific description\n-show ip ospf database\n-Show running system information\n-IP information\n-OSPF information\n-Database summary\n-no ip large-community-list <1-99> (deny|permit) .AA:.AA:NN\n-Negate a command or set its defaults\n-IP information\n-Add a large community list entry\n-Large Community list number (standard)\n-Specify large community to reject\n-Specify large community to accept\n-large community in 'aa:bb:cc' format\n-show bgp ipv4 A.B.C.D/M longer-prefixes\n-Show running system information\n-BGP information\n-IP information\n-IP prefix /, e.g., 35.0.0.0/8\n-Display route and more specific routes\n-neighbor (A.B.C.D|X:X::X:X|WORD) update-source (A.B.C.D|X:X::X:X|WORD)\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Source of routing updates\n-IPv4 address\n-IPv6 address\n-Interface name (requires zebra to be running)\n-match ipv6 address WORD\n-Match values from routing table\n-IPv6 information\n-Match IPv6 address of route\n-IPv6 access-list name\n-match community (<1-99>|<100-500>|WORD) exact-match\n-Match values from routing table\n-Match BGP community list\n-Community-list number (standard)\n-Community-list number (expanded)\n-Community-list name\n-Do exact matching of communities\n-bgp cluster-id A.B.C.D\n-BGP information\n-Configure Route-Reflector Cluster-id\n-Route-Reflector Cluster-id in IP address format\n-show bgp ipv6 encap rd ASN:nn_or_IP-address:nn tags\n-Show running system information\n-BGP information\n-Address Family\n-Display ENCAP NLRI specific information\n-Display information for a route distinguisher\n-ENCAP Route Distinguisher\n-Display BGP tags for prefixes\n-no debug ospf nsm\n-Negate a command or set its defaults\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display the received routes from neighbor\n+show ip bgp A.B.C.D (bestpath|multipath)\n+debug ospf event\n Debugging functions (see also 'undebug')\n OSPF information\n-OSPF Neighbor State Machine\n-clear ip bgp A.B.C.D vpnv4 unicast soft in\n+OSPF event information\n+clear bgp ipv6 * soft in\n Reset functions\n-IP information\n BGP information\n-BGP neighbor address to clear\n Address family\n-Address Family Modifier\n+Clear all peers\n Soft reconfig inbound and outbound updates\n Send route-refresh unless using 'soft-reconfiguration inbound'\n-neighbor (A.B.C.D|X:X::X:X) port <0-65535>\n-Specify neighbor router\n-Neighbor address\n-IPv6 address\n-Neighbor's BGP port\n-TCP port number\n-show bgp ipv6 (encap|multicast|unicast|vpn) dampening flap-statistics route-map WORD\n-Show running system information\n+undebug bgp fsm\n+Disable debugging functions (see also 'debug')\n BGP information\n-IPv6 information\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Display detailed information about dampening\n-Display flap statistics of routes\n-Display routes matching the route-map\n-A route-map to match on\n-ip pim drpriority <1-4294967295>\n-IP information\n-PIM information\n-Set the Designated Router Election Priority\n-Value of the new DR Priority\n-no neighbor (A.B.C.D|X:X::X:X|WORD) local-as <1-4294967295>\n-Negate a command or set its defaults\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Specify a local-as number\n-AS number used as local AS\n-no ip route A.B.C.D/M (reject|blackhole) tag <1-4294967295> <1-255>\n-Negate a command or set its defaults\n+Finite State Machine\n+ipv6 route X:X::X:X/M X:X::X:X INTERFACE (reject|blackhole) vrf <0-65535>\n IP information\n Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n Emit an ICMP unreachable when matched\n Silently discard pkts when matched\n-Tag of this route\n-Tag value\n-Distance value for this route\n-ip extcommunity-list <1-99> (deny|permit)\n-IP information\n-Add a extended community list entry\n-Extended Community list number (standard)\n-Specify community to reject\n-Specify community to accept\n-show ip bgp view WORD\n-Show running system information\n-IP information\n-BGP information\n-BGP view\n-View name\n-ipv6 nd prefix X:X::X:X/M (off-link|)\n-Interface IPv6 config commands\n-Neighbor discovery\n-Prefix information\n-IPv6 prefix\n-Do not use prefix for onlink determination\n-ip route A.B.C.D/M (A.B.C.D|INTERFACE|null0) <1-255> vrf <0-65535>\n-IP information\n-Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n-IP gateway address\n-IP gateway interface name\n-Null interface\n-Distance value for this route\n Specify the VRF\n The VRF ID\n-distance bgp <1-255> <1-255> <1-255>\n-Define an administrative distance\n-BGP distance\n-Distance for routes external to the AS\n-Distance for routes internal to the AS\n-Distance for local routes\n-no nhrp event socket [SOCKET]\n-Negate a command or set its defaults\n-Next Hop Resolution Protocol functions\n-Event Manager commands\n-Event Manager unix socket path\n-Unix path for the socket\n-no delay\n+no ip rip receive version (1|2)\n Negate a command or set its defaults\n-Disable Unidirectional Average, Min & Max Link Delay on this interface\n-ip ospf hello-interval <1-65535> A.B.C.D\n-IP Information\n-OSPF interface commands\n-Time between HELLO packets\n-Address of interface\n-show ip prefix-list detail WORD\n-Show running system information\n IP information\n+Routing Information Protocol\n+Advertisement reception\n+Version control\n+Version 1\n+Version 2\n+show ipv6 prefix-list WORD X:X::X:X/M\n+Show running system information\n+IPv6 information\n Build a prefix list\n-Detail of prefix lists\n Name of a prefix list\n-show interface\n+IPv6 prefix /, e.g., 3ffe::/16\n+show ipv6 bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n Show running system information\n-Interface status and configuration\n-Set multicast flag to interface\n-no ipv6 forwarding\n-Negate a command or set its defaults\n IPv6 information\n-Turn off IPv6 forwarding\n-neighbor (A.B.C.D|X:X::X:X) peer-group WORD\n-Specify neighbor router\n-Neighbor address\n-IPv6 address\n-Member of the peer-group\n-peer-group name\n-debug ospf6 lsa (router|network|inter-prefix|inter-router|as-ext|grp-mbr|type7|link|intra-prefix|unknown) (originate|examine|flooding)\n-Debugging functions (see also 'undebug')\n-Open Shortest Path First (OSPF) for IPv6\n-Debug Link State Advertisements (LSAs)\n-Specify LS type as Hexadecimal\n-show bgp neighbors (A.B.C.D|X:X::X:X) flap-statistics\n-Show running system information\n-BGP information\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display flap statistics of the routes learned from neighbor\n-ip ospf transmit-delay <1-65535>\n-IP Information\n-OSPF interface commands\n-Link state transmit delay\n-no ip ospf authentication\n-Negate a command or set its defaults\n-IP Information\n-OSPF interface commands\n-Enable authentication on this interface\n-bgp dampening <1-45> <1-20000> <1-20000> <1-255>\n-BGP Specific commands\n-Enable route-flap dampening\n-Half-life time for the penalty\n-Value to start reusing a route\n-Value to start suppressing a route\n-Maximum duration to suppress a stable route\n-clear bgp ipv6 external soft in\n-Reset functions\n-BGP information\n-Address family\n-Clear all external peers\n-Soft reconfig inbound and outbound updates\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-set origin (egp|igp|incomplete)\n-Set values in destination routing protocol\n-BGP origin code\n-remote EGP\n-local IGP\n-unknown heritage\n-access-list (<100-199>|<2000-2699>) (deny|permit) ip any A.B.C.D A.B.C.D\n-Add an access list entry\n-IP extended access list\n-IP extended access list (expanded range)\n-Specify packets to reject\n-Specify packets to forward\n-Any Internet Protocol\n-Any source host\n-Destination address\n-Destination Wildcard bits\n-maximum-paths ibgp <1-1>\n-Forward packets over multiple paths\n-iBGP-multipath\n-Number of paths\n-clear ip bgp external soft\n-Reset functions\n-IP information\n BGP information\n-Clear all external peers\n-Soft reconfig inbound and outbound updates\n-no ip route A.B.C.D/M (reject|blackhole) tag <1-4294967295>\n-Negate a command or set its defaults\n-IP information\n-Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Tag of this route\n-Tag value\n-bgp client-to-client reflection\n-BGP specific commands\n-Configure client to client route reflection\n-reflection of routes allowed\n-show ipv6 mbgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n-Show running system information\n-IPv6 information\n-MBGP information\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-show ipv6 ospf6 database * A.B.C.D (detail|dump|internal)\n-Show running system information\n+Exact match of the communities\n+ipv6 prefix-list WORD (deny|permit) (X:X::X:X/M|any)\n IPv6 information\n-Open Shortest Path First (OSPF) for IPv6\n-Display Link state database\n-Any Link state Type\n-Specify Link state ID as IPv4 address notation\n-Display details of LSAs\n-Dump LSAs\n-Display LSA's internal information\n-undebug bgp nht\n-Disable debugging functions (see also 'debug')\n-BGP information\n-BGP next-hop tracking updates\n-ip prefix-list WORD (deny|permit) A.B.C.D/M le <0-32>\n-IP information\n Build a prefix list\n Name of a prefix list\n Specify packets to reject\n Specify packets to forward\n-IP prefix /, e.g., 35.0.0.0/8\n-Maximum prefix length to be matched\n-Maximum prefix length\n-clear bgp ipv6 * in\n-Reset functions\n+IPv6 prefix /, e.g., 3ffe::/16\n+Any prefix match. Same as \"::0/0 le 128\"\n+no match pathlimit as <1-65535>\n+Negate a command or set its defaults\n+Match values from routing table\n+BGP AS-Pathlimit attribute\n+Match Pathlimit ASN\n+no route-map ROUTEMAP_NAME (in|out) IFNAME\n+Negate a command or set its defaults\n+Route map unset\n+Route map name\n+Route map for input filtering\n+Route map for output filtering\n+Route map interface name\n+show bgp ipv6 encap rd ASN:nn_or_IP-address:nn tags\n+ipv6 nd prefix X:X::X:X/M (<0-4294967295>|infinite) (<0-4294967295>|infinite) (off-link|) (no-autoconfig|) (router-address|)\n+Interface IPv6 config commands\n+Neighbor discovery\n+Prefix information\n+IPv6 prefix\n+Valid lifetime in seconds\n+Infinite valid lifetime\n+Preferred lifetime in seconds\n+Infinite preferred lifetime\n+Do not use prefix for onlink determination\n+Do not use prefix for autoconfiguration\n+Set Router Address flag\n+set src A.B.C.D\n+Set values in destination routing protocol\n+src address for route\n+src address\n+show ip ospf neighbor all\n+Show running system information\n+IP information\n+OSPF information\n+Neighbor list\n+include down status neighbor\n+no ipv6 nd adv-interval-option\n+Negate a command or set its defaults\n+Interface IPv6 config commands\n+Neighbor discovery\n+Advertisement Interval Option\n+debug ospf6 abr\n+Debugging functions (see also 'undebug')\n+Open Shortest Path First (OSPF) for IPv6\n+Debug OSPFv3 ABR function\n+show ip bgp vpnv4 rd ASN:nn_or_IP-address:nn A.B.C.D\n+Show running system information\n+IP information\n+BGP information\n+Display VPNv4 NLRI specific information\n+Display information for a route distinguisher\n+VPN Route Distinguisher\n+Network in the BGP routing table to display\n+show bgp community-list (<1-500>|WORD)\n+Show running system information\n+BGP information\n+Display routes matching the community-list\n+community-list number\n+community-list name\n+show ip bgp ipv4 (unicast|multicast) neighbors (A.B.C.D|X:X::X:X) received prefix-filter\n+Show running system information\n+IP information\n BGP information\n Address family\n-Clear all peers\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-show bgp ipv6 (encap|multicast|unicast|vpn) flap-statistics route-map WORD\n+Address Family modifier\n+Address Family modifier\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display information received from a BGP neighbor\n+Display the prefixlist filter\n+show bgp ipv6 (encap|multicast|unicast|vpn) community-list (<1-500>|WORD) exact-match\n Show running system information\n BGP information\n-IPv6 information\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Display flap statistics of routes\n-Display routes matching the route-map\n-A route-map to match on\n-no redistribute (kernel|connected|static|ospf|isis|bgp|pim|babel|nhrp) metric <0-16> route-map WORD\n+Address family\n+Address family modifier\n+Address family modifier\n+Address family modifier\n+Address family modifier\n+Display routes matching the community-list\n+community-list number\n+community-list name\n+Exact match of the communities\n+show ip bgp cidr-only\n+Show running system information\n+IP information\n+BGP information\n+Display only routes with non-natural netmasks\n+no spf-interval <1-120>\n Negate a command or set its defaults\n+Minimum interval between SPF calculations\n+Minimum interval between consecutive SPFs in seconds\n+redistribute (kernel|connected|static|ospf|isis|bgp|pim|babel|nhrp)\n Redistribute information from another routing protocol\n Kernel routes (not installed via the zebra RIB)\n Connected routes (directly attached subnet or host)\n Statically configured routes\n Open Shortest Path First (OSPFv2)\n Intermediate System to Intermediate System (IS-IS)\n Border Gateway Protocol (BGP)\n Protocol Independent Multicast (PIM)\n Babel routing protocol (Babel)\n Next Hop Resolution Protocol (NHRP)\n-Metric value\n-Route map reference\n-Pointer to route-map entries\n-clear bgp ipv6 external\n-Reset functions\n-BGP information\n-Address family\n-Clear all external peers\n-no ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole) tag <1-4294967295>\n+show bgp ipv6 (encap|multicast|unicast|vpn) neighbors (A.B.C.D|X:X::X:X) received-routes\n+no ip large-community-list <1-99> (deny|permit) .AA:.AA:NN\n Negate a command or set its defaults\n IP information\n+Add a large community list entry\n+Large Community list number (standard)\n+Specify large community to reject\n+Specify large community to accept\n+large community in 'aa:bb:cc' format\n+ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) vrf <0-65535>\n+IP information\n Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n-IP gateway address\n-IP gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Tag of this route\n-Tag value\n-ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole) tag <1-4294967295> <1-255>\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n+Specify the VRF\n+The VRF ID\n+isis hello-interval <1-600>\n+IS-IS commands\n+Set Hello interval\n+Hello interval value\n+Holdtime 1 seconds, interval depends on multiplier\n+ip route A.B.C.D A.B.C.D (reject|blackhole) tag <1-4294967295>\n IP information\n Establish static routes\n IP destination prefix\n IP destination prefix mask\n-IP gateway address\n-IP gateway interface name\n-Set tag for this route\n-Tag value\n-Distance value for this route\n Emit an ICMP unreachable when matched\n Silently discard pkts when matched\n-show bgp view WORD rsclient (A.B.C.D|X:X::X:X)\n+Set tag for this route\n+Tag value\n+no debug ospf6 lsa (router|network|inter-prefix|inter-router|as-ext|grp-mbr|type7|link|intra-prefix) (originate|examine|flooding)\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+Open Shortest Path First (OSPF) for IPv6\n+Debug Link State Advertisements (LSAs)\n+Specify LS type as Hexadecimal\n+no debug ospf lsa\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+OSPF information\n+OSPF Link State Advertisement\n+show ip bgp A.B.C.D/M\n+Show running system information\n+IP information\n+BGP information\n+IP prefix /, e.g., 35.0.0.0/8\n+no default-information originate (ipv4|ipv6) (level-1|level-2)\n+Negate a command or set its defaults\n+Control distribution of default information\n+Distribute a default route\n+Distribute default route for IPv4\n+Distribute default route for IPv6\n+Distribute default route into level-1\n+Distribute default route into level-2\n+no debug bgp as4 segment\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+BGP information\n+BGP AS4 actions\n+BGP AS4 aspath segment handling\n+show bgp neighbors (A.B.C.D|X:X::X:X) advertised-routes\n Show running system information\n BGP information\n-BGP view\n-View name\n-Information about Route Server Client\n-Neighbor address\n-IPv6 address\n-distribute-list WORD out (kernel|connected|static|rip|isis|bgp|pim|babel|nhrp)\n-Filter networks in routing updates\n-Access-list name\n-Filter outgoing routing updates\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display the routes advertised to a BGP neighbor\n+no set metric <0-4294967295>\n+Negate a command or set its defaults\n+Set values in destination routing protocol\n+Metric value for destination routing protocol\n+Metric value\n+no redistribute (kernel|connected|static|rip|isis|bgp|pim|babel|nhrp)\n+Negate a command or set its defaults\n+Redistribute information from another routing protocol\n Kernel routes (not installed via the zebra RIB)\n Connected routes (directly attached subnet or host)\n Statically configured routes\n Routing Information Protocol (RIP)\n Intermediate System to Intermediate System (IS-IS)\n Border Gateway Protocol (BGP)\n Protocol Independent Multicast (PIM)\n Babel routing protocol (Babel)\n Next Hop Resolution Protocol (NHRP)\n-lsp-refresh-interval level-2 <1-65235>\n-LSP refresh interval for Level 2 only\n-LSP refresh interval for Level 2 only in seconds\n-no neighbor WORD remote-as <1-4294967295>\n-Negate a command or set its defaults\n-Specify neighbor router\n-Neighbor tag\n-Specify a BGP neighbor\n-AS number\n-no ip prefix-list WORD description .LINE\n+no debug ospf6 border-routers router-id\n Negate a command or set its defaults\n-IP information\n-Build a prefix list\n-Name of a prefix list\n-Prefix-list specific description\n-Up to 80 characters describing this prefix-list\n-show ip igmp groups\n-Show running system information\n-IP information\n-IGMP information\n-IGMP groups information\n-no debug pim packet-dump receive\n+Debugging functions (see also 'undebug')\n+Open Shortest Path First (OSPF) for IPv6\n+Debug border router\n+Debug specific border router\n+bgp network import-check\n+BGP specific commands\n+BGP network command\n+Check BGP network route exists in IGP\n+ipv6 nd prefix X:X::X:X/M (<0-4294967295>|infinite) (<0-4294967295>|infinite)\n+Interface IPv6 config commands\n+Neighbor discovery\n+Prefix information\n+IPv6 prefix\n+Valid lifetime in seconds\n+Infinite valid lifetime\n+Preferred lifetime in seconds\n+Infinite preferred lifetime\n+no debug all bgp\n Negate a command or set its defaults\n Debugging functions (see also 'undebug')\n-PIM protocol activity\n-PIM packet dump\n-Dump received packets\n-no ip address A.B.C.D/M label LINE\n+Enable all debugging\n+BGP information\n+no set extcommunity rt .ASN:nn_or_IP-address:nn\n Negate a command or set its defaults\n+Set values in destination routing protocol\n+BGP extended community attribute\n+Route Target extended community\n+VPN extended community\n+ip address A.B.C.D/M label LINE\n Interface Internet Protocol config commands\n Set the IP address of an interface\n IP address (e.g. 10.0.0.1/8)\n Label of this address\n-no isis csnp-interval <1-600> level-1\n+no ipv6 prefix-list WORD description .LINE\n Negate a command or set its defaults\n-IS-IS commands\n-Set CSNP interval in seconds\n-CSNP interval value\n-Specify interval for level-1 CSNPs\n-clear ip bgp external in\n+IPv6 information\n+Build a prefix list\n+Name of a prefix list\n+Prefix-list specific description\n+Up to 80 characters describing this prefix-list\n+show bgp view WORD ipv6 neighbors (A.B.C.D|X:X::X:X) dampened-routes\n+show bgp ipv6\n+Show running system information\n+BGP information\n+Address family\n+clear ip bgp view WORD * in prefix-filter\n Reset functions\n IP information\n BGP information\n-Clear all external peers\n+BGP view\n+view name\n+Clear all peers\n Send route-refresh unless using 'soft-reconfiguration inbound'\n-show ip bgp flap-statistics route-map WORD\n+Push out prefix-list ORF and do inbound soft reconfig\n+no bgp graceful-restart stalepath-time <1-3600>\n+Negate a command or set its defaults\n+BGP specific commands\n+Graceful restart capability parameters\n+Set the max time to hold onto restarting peer's stale paths\n+Delay value (seconds)\n+show ipv6 bgp community-list WORD exact-match\n+Show running system information\n+IPv6 information\n+BGP information\n+Display routes matching the community-list\n+community-list name\n+Exact match of the communities\n+clear isis neighbor\n+Reset functions\n+Reset ISIS network information\n+Reset ISIS neighbor adjacencies\n+no debug pim trace\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+PIM protocol activity\n+PIM internal daemon activity\n+show ip bgp neighbors (A.B.C.D|X:X::X:X) routes\n Show running system information\n IP information\n BGP information\n-Display flap statistics of routes\n-Display routes matching the route-map\n-A route-map to match on\n-show bgp ipv4 (encap|multicast|unicast|vpn) filter-list WORD\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display routes learned from neighbor\n+no access-list WORD (deny|permit) any\n+Define an administrative distance\n+OSPF Administrative distance\n+ip protocol PROTO route-map ROUTE-MAP\n+Negate a command or set its defaults\n+Apply route map to PROTO\n+Protocol name\n+Route map name\n+max-rsv-bw BANDWIDTH\n+Maximum bandwidth that may be reserved\n+Bytes/second (IEEE floating point format)\n+show ipv6 ospf6 interface prefix X:X::X:X/M (match|detail)\n+Show running system information\n+IPv6 Information\n+Open Shortest Path First (OSPF) for IPv6\n+Interface information\n+Display connected prefixes to advertise\n+Display the route\n+Display the route matches the prefix\n+Display details of the prefixes\n+no neighbor WORD remote-as <1-4294967295>\n+Negate a command or set its defaults\n+Specify neighbor router\n+Neighbor tag\n+Specify a BGP neighbor\n+AS number\n+show bgp ipv4 vpn rd ASN:nn_or_IP-address:nn tags\n Show running system information\n BGP information\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Display routes conforming to the filter-list\n-Regular expression access list name\n-no ip route A.B.C.D/M (reject|blackhole)\n+Address Family\n+Display VPN NLRI specific information\n+Display information for a route distinguisher\n+VPN Route Distinguisher\n+Display BGP tags for prefixes\n+no match ipv6 address\n+Negate a command or set its defaults\n+Match values from routing table\n+IPv6 information\n+Match IPv6 address of route\n+show ip bgp view WORD A.B.C.D\n+Show running system information\n+IP information\n+BGP information\n+BGP view\n+View name\n+Network in the BGP routing table to display\n+debug ospf nssa\n+Debugging functions (see also 'undebug')\n+OSPF information\n+OSPF nssa information\n+no aggregate-address X:X::X:X/M\n+Negate a command or set its defaults\n+Delete aggregate RIPng route announcement\n+Aggregate network\n+network A.B.C.D/M route-map WORD\n+Specify a network to announce via BGP\n+IP prefix /, e.g., 35.0.0.0/8\n+Route-map to modify the attributes\n+Name of the route map\n+no ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole) tag <1-4294967295>\n Negate a command or set its defaults\n IP information\n Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n+IP destination prefix\n+IP destination prefix mask\n+IP gateway address\n+IP gateway interface name\n Emit an ICMP unreachable when matched\n Silently discard pkts when matched\n-clear ip bgp external soft in\n-Reset functions\n-IP information\n-BGP information\n-Clear all external peers\n-Soft reconfig inbound and outbound updates\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-show ip pim assert\n-Show running system information\n-IP information\n-PIM information\n-PIM interface assert\n-no redistribute (kernel|connected|static|ripng|ospf6|isis|babel|nhrp)\n+Tag of this route\n+Tag value\n+no redistribute (kernel|connected|static|ospf|isis|bgp|pim|babel|nhrp) metric <0-16> route-map WORD\n Negate a command or set its defaults\n Redistribute information from another routing protocol\n Kernel routes (not installed via the zebra RIB)\n Connected routes (directly attached subnet or host)\n Statically configured routes\n-Routing Information Protocol next-generation (IPv6) (RIPng)\n-Open Shortest Path First (IPv6) (OSPFv3)\n+Open Shortest Path First (OSPFv2)\n Intermediate System to Intermediate System (IS-IS)\n+Border Gateway Protocol (BGP)\n+Protocol Independent Multicast (PIM)\n Babel routing protocol (Babel)\n Next Hop Resolution Protocol (NHRP)\n-show ip ospf mpls-te router\n+Metric value\n+Route map reference\n+Pointer to route-map entries\n+clear bgp ipv6 (unicast|multicast) prefix X:X::X:X/M\n+Reset functions\n+BGP information\n+Address family\n+Address Family Modifier\n+Clear bestpath and re-advertise\n+IPv6 prefix /, e.g., 3ffe::/16\n+ip irdp maxadvertinterval <4-1800>\n+IP information\n+ICMP Router discovery on this interface\n+Set maximum time between advertisement\n+Maximum advertisement interval in seconds\n+no router-id vrf <0-65535>\n+Negate a command or set its defaults\n+Remove the manually configured router-id\n+Specify the VRF\n+The VRF ID\n+show ipv6 bgp X:X::X:X/M\n Show running system information\n IP information\n-OSPF information\n-MPLS-TE information\n-MPLS-TE Router parameters\n-ip route A.B.C.D/M (A.B.C.D|INTERFACE|null0) tag <1-4294967295> <1-255>\n+BGP information\n+IPv6 prefix /, e.g., 3ffe::/16\n+no debug isis spf-events\n+Disable debugging functions (see also 'debug')\n+IS-IS information\n+IS-IS Shortest Path First Events\n+no max-lsp-lifetime\n+Negate a command or set its defaults\n+LSP lifetime in seconds\n+neighbor (A.B.C.D|X:X::X:X|WORD) send-community\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Send Community attribute to this neighbor\n+neighbor (A.B.C.D|X:X::X:X|WORD) enforce-multihop\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Enforce EBGP neighbors perform multihop\n+clear bgp ipv6 (A.B.C.D|X:X::X:X)\n+Reset functions\n+BGP information\n+Address family\n+BGP neighbor address to clear\n+BGP IPv6 neighbor to clear\n+Add an access list entry\n+IP zebra access-list name\n+Specify packets to reject\n+Specify packets to forward\n+Prefix to match. e.g. 10.0.0.0/8\n+debug isis local-updates\n+Debugging functions (see also 'undebug')\n+IS-IS information\n+IS-IS local update packets\n+show ip pim assert-internal\n+Show running system information\n+IP information\n+PIM information\n+PIM interface internal assert state\n+debug isis checksum-errors\n+Debugging functions (see also 'undebug')\n+IS-IS information\n+IS-IS LSP checksum errors\n+no isis priority <0-127> level-2\n+Negate a command or set its defaults\n+IS-IS commands\n+Set priority for Designated Router election\n+Priority value\n+Specify priority for level-2 routing\n+set metric-type (type-1|type-2)\n+Set value\n+Type of metric\n+OSPF6 external type 1 metric\n+OSPF6 external type 2 metric\n+no neighbor (A.B.C.D|X:X::X:X|WORD) send-community (both|all|extended|standard|large)\n+Negate a command or set its defaults\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Send Community attribute to this neighbor\n+Send Standard, Large and Extended Community attributes\n+Send Standard, Large and Extended Community attributes\n+Send Extended Community attributes\n+Send Standard Community attributes\n+Send Large Community attributes\n+clear ip bgp * vpnv4 unicast soft in\n+Reset functions\n+IP information\n+BGP information\n+Clear all peers\n+Address family\n+Address Family Modifier\n+Soft reconfig inbound and outbound updates\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE|null0) tag <1-4294967295> <1-255>vrf <0-65535>\n IP information\n Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n+IP destination prefix\n+IP destination prefix mask\n IP gateway address\n IP gateway interface name\n Null interface\n Set tag for this route\n Tag value\n Distance value for this route\n-no match probability\n+Specify the VRF\n+The VRF ID\n+link-detect [default]\n+Enable link detection on interface\n+Leave link-detect to the default\n+ipv6 ospf6 ifmtu <1-65535>\n+IPv6 Information\n+Open Shortest Path First (OSPF) for IPv6\n+Interface MTU\n+OSPFv3 Interface MTU\n+no set local-preference\n Negate a command or set its defaults\n-Match values from routing table\n-Match portion of routes defined by percentage value\n-(ip|ipv6) nhrp holdtime <1-65000>\n+Set values in destination routing protocol\n+BGP local preference path attribute\n+show bgp ipv4 (encap|multicast|unicast|vpn) flap-statistics filter-list WORD\n+Show running system information\n+BGP information\n IP information\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n+Display flap statistics of routes\n+Display routes conforming to the filter-list\n+Regular expression access list name\n+set ipv6 next-hop peer-address\n+Set values in destination routing protocol\n IPv6 information\n-Next Hop Resolution Protocol functions\n-Specify NBMA address validity time\n-Time in seconds that NBMA addresses are advertised valid\n-no network A.B.C.D backdoor\n-Negate a command or set its defaults\n-Specify a network to announce via BGP\n-Network number\n-Specify a BGP backdoor route\n-clear ip bgp view WORD (A.B.C.D|X:X::X:X) rsclient\n-Reset functions\n+Next hop address\n+Use peer address (for BGP only)\n+hostname dynamic\n+Dynamic hostname for IS-IS\n+Dynamic hostname\n+match ip address (<1-199>|<1300-2699>|WORD)\n+Match values from routing table\n IP information\n-BGP information\n-BGP view\n-view name\n-BGP neighbor IP address to clear\n-BGP IPv6 neighbor to clear\n-Soft reconfig for rsclient RIB\n-no match large-community (<1-99>|<100-500>|WORD)\n+Match address of route\n+IP access-list number\n+IP access-list number (expanded range)\n+IP Access-list name\n+no lsp-refresh-interval level-2\n Negate a command or set its defaults\n-Match values from routing table\n-Match BGP large community list\n-Large Community-list number (standard)\n-Large Community-list number (expanded)\n-Large Community-list name\n-show bgp ipv6 community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n+LSP refresh interval for Level 2 only in seconds\n+show bgp ipv6 (encap|multicast|unicast|vpn) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n Show running system information\n BGP information\n Address family\n+Address family modifier\n+Address family modifier\n+Address family modifier\n+Address family modifier\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n@@ -6842,1564 +6160,1263 @@\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-show bgp route-map WORD\n-Show running system information\n-BGP information\n-Display routes matching the route-map\n-A route-map to match on\n-show bgp view WORD (ipv4|ipv6) (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n+no debug ospf6 neighbor (state|event)\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+Open Shortest Path First (OSPF) for IPv6\n+Debug OSPFv3 Neighbor\n+Debug OSPFv3 Neighbor State Change\n+Debug OSPFv3 Neighbor Event\n+ipv6 prefix-list WORD (deny|permit) X:X::X:X/M le <0-128> ge <0-128>\n+IPv6 information\n+Build a prefix list\n+Name of a prefix list\n+Specify packets to reject\n+Specify packets to forward\n+IPv6 prefix /, e.g., 3ffe::/16\n+Maximum prefix length to be matched\n+Maximum prefix length\n+Minimum prefix length to be matched\n+Minimum prefix length\n+show bgp ipv6 (encap|multicast|unicast|vpn) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n Show running system information\n BGP information\n-BGP view\n-View name\n-Address family\n Address family\n Address family modifier\n Address family modifier\n+Address family modifier\n+Address family modifier\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-Enable password checking\n-debug pim packet-dump send\n-Debugging functions (see also 'undebug')\n-PIM protocol activity\n-PIM packet dump\n-Dump sent packets\n-no ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) (reject|blackhole) <1-255>\n-Negate a command or set its defaults\n-IP information\n-Establish static routes\n-IPv6 destination prefix (e.g. 3ffe:506::/32)\n-IPv6 gateway address\n-IPv6 gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Distance value for this prefix\n-show ip ospf router-info\n-Show running system information\n-IP information\n-OSPF information\n-Router Information\n-show bgp ipv6 vpn rd ASN:nn_or_IP-address:nn tags\n-Show running system information\n-BGP information\n-Address Family\n-Display VPN NLRI specific information\n-Display information for a route distinguisher\n-VPN Route Distinguisher\n-Display BGP tags for prefixes\n-show ip bgp large-community-list (<1-500>|WORD)\n-Show running system information\n-IP information\n-BGP information\n-Display routes matching the large-community-list\n-large-community-list number\n-large-community-list name\n-no ip ospf cost A.B.C.D\n-Negate a command or set its defaults\n-IP Information\n-OSPF interface commands\n-Interface cost\n-Address of interface\n-show bgp ipv4 (unicast|multicast) community-list (<1-500>|WORD) exact-match\n-Show running system information\n-BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Display routes matching the community-list\n-community-list number\n-community-list name\n-Exact match of the communities\n-show ipv6 mbgp neighbors (A.B.C.D|X:X::X:X) routes\n-Show running system information\n-IPv6 information\n-MBGP information\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display routes learned from neighbor\n-show bgp ipv6 (encap|multicast|unicast|vpn) neighbors (A.B.C.D|X:X::X:X) flap-statistics\n-area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535> (hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535>\n+set as-path exclude .<1-4294967295>\n+Set values in destination routing protocol\n+Transform BGP AS-path attribute\n+Exclude from the as-path\n+AS number\n+area (A.B.C.D|<0-4294967295>) range A.B.C.D/M substitute A.B.C.D/M\n OSPF area parameters\n OSPF area ID in IP address format\n OSPF area ID as a decimal value\n-Configure a virtual link\n-Router ID of the remote ABR\n-Time between HELLO packets\n-Time between retransmitting lost link state advertisements\n-Link state transmit delay\n-Interval after which a neighbor is declared dead\n-Time between HELLO packets\n-Time between retransmitting lost link state advertisements\n-Link state transmit delay\n-Interval after which a neighbor is declared dead\n-show bgp ipv4 encap A.B.C.D/M\n-Show running system information\n-BGP information\n-IP information\n-Display ENCAP NLRI specific information\n-Display information about ENCAP NLRIs\n-IP prefix /, e.g., 35.0.0.0/8\n-show ip route summary vrf all\n+Summarize routes matching address/mask (border routers only)\n+Area range prefix\n+Announce area range as another prefix\n+Network prefix to be announced instead of range\n+show ip route vrf all\n Show running system information\n IP information\n IP routing table\n-Summary of all routes\n Specify the VRF\n All VRFs\n-show bgp neighbors (A.B.C.D|X:X::X:X) advertised-routes\n+show ipv6 bgp neighbors (A.B.C.D|X:X::X:X) received-routes\n Show running system information\n+IPv6 information\n BGP information\n Detailed information on TCP and BGP neighbor connections\n Neighbor to display information about\n Neighbor to display information about\n-Display the routes advertised to a BGP neighbor\n-neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged med next-hop as-path\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-BGP attribute is propagated unchanged to this neighbor\n-Med attribute\n-Nexthop attribute\n-As-path attribute\n-ip extcommunity-list standard WORD (deny|permit) .AA:NN\n-IP information\n-Add a extended community list entry\n-Specify standard extcommunity-list\n-Extended Community list name\n-Specify community to reject\n-Specify community to accept\n-Extended community attribute in 'rt aa:nn_or_IPaddr:nn' OR 'soo aa:nn_or_IPaddr:nn' format\n-clear ip bgp * rsclient\n-Reset functions\n-IP information\n-BGP information\n-Clear all peers\n-Soft reconfig for rsclient RIB\n-show bgp ipv6 community-list (<1-500>|WORD) exact-match\n-Show running system information\n-BGP information\n-Address family\n-Display routes matching the community-list\n-community-list number\n-community-list name\n-Exact match of the communities\n-no set comm-list (<1-99>|<100-500>|WORD) delete\n-Negate a command or set its defaults\n-Set values in destination routing protocol\n-set BGP community list (for deletion)\n-Community-list number (standard)\n-Community-list number (expanded)\n-Community-list name\n-Delete matching communities\n+Display the received routes from neighbor\n no ip route A.B.C.D/M (reject|blackhole) <1-255>\n Negate a command or set its defaults\n IP information\n Establish static routes\n IP destination prefix (e.g. 10.0.0.0/8)\n Emit an ICMP unreachable when matched\n Silently discard pkts when matched\n Distance value for this route\n-clear ip bgp <1-4294967295> vpnv4 unicast soft in\n-Reset functions\n-IP information\n-BGP information\n-Clear peers with the AS number\n-Address family\n-Address Family modifier\n-Soft reconfig inbound and outbound updates\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) A.B.C.D self-originated (detail|dump|internal)\n-clear ip bgp <1-4294967295> encap unicast soft\n-Reset functions\n-IP information\n-BGP information\n-Clear peers with the AS number\n-Address family\n-Address Family Modifier\n-Soft reconfig\n-passive-interface IFNAME\n-Suppress routing updates on an interface\n-Interface's name\n-debug ospf6 asbr\n-Debugging functions (see also 'undebug')\n-Open Shortest Path First (OSPF) for IPv6\n-Debug OSPFv3 ASBR function\n-no route A.B.C.D/M\n-Negate a command or set its defaults\n-RIP static route configuration\n-IP prefix /\n-no set large-comm-list (<1-99>|<100-500>|WORD) delete\n-Negate a command or set its defaults\n-Set values in destination routing protocol\n-set BGP large community list (for deletion)\n-Large Community-list number (standard)\n-Large Communitly-list number (expanded)\n-Large Community-list name\n-Delete matching large communities\n-show bgp ipv4 encap A.B.C.D\n+Manually set the router-id\n+IP address to use for router-id\n+show bgp ipv6 rsclient (A.B.C.D|X:X::X:X) X:X::X:X\n Show running system information\n BGP information\n-IP information\n-Display ENCAP NLRI specific information\n+IPv6 Information\n+Information about Route Server Client\n+Neighbor address\n+IPv6 address\n Network in the BGP routing table to display\n-set large-comm-list (<1-99>|<100-500>|WORD) delete\n-Set values in destination routing protocol\n-set BGP large community list (for deletion)\n-Large Community-list number (standard)\n-Large Communitly-list number (expanded)\n-Large Community-list name\n-Delete matching large communities\n-clear bgp peer-group WORD soft out\n-Reset functions\n-BGP information\n-Clear all members of peer-group\n-BGP peer-group name\n-Soft reconfig inbound and outbound updates\n-Resend all outbound updates\n-no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (hello-interval|retransmit-interval|transmit-delay|dead-interval) (hello-interval|retransmit-interval|transmit-delay|dead-interval) (hello-interval|retransmit-interval|transmit-delay|dead-interval) (hello-interval|retransmit-interval|transmit-delay|dead-interval)\n-Negate a command or set its defaults\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Configure a virtual link\n-Router ID of the remote ABR\n-Time between HELLO packets\n-Time between retransmitting lost link state advertisements\n-Link state transmit delay\n-Interval after which a neighbor is declared dead\n-Time between HELLO packets\n-Time between retransmitting lost link state advertisements\n-Link state transmit delay\n-Interval after which a neighbor is declared dead\n-Time between HELLO packets\n-Time between retransmitting lost link state advertisements\n-Link state transmit delay\n-Interval after which a neighbor is declared dead\n-Time between HELLO packets\n-Time between retransmitting lost link state advertisements\n-Link state transmit delay\n-Interval after which a neighbor is declared dead\n-show bgp ipv6 (encap|multicast|unicast|vpn) X:X::X:X/M longer-prefixes\n-Show running system information\n-BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-IP prefix /, e.g., 35.0.0.0/8\n-Display route and more specific routes\n-no set ip next-hop A.B.C.D\n-Negate a command or set its defaults\n-Set values in destination routing protocol\n-IP information\n-Next hop address\n-IP address of next hop\n-no access-list (<1-99>|<1300-1999>) (deny|permit) any\n-Negate a command or set its defaults\n-Add an access list entry\n-IP standard access list\n-IP standard access list (expanded range)\n-Specify packets to reject\n-Specify packets to forward\n-Any source host\n-undebug bgp keepalives\n-Disable debugging functions (see also 'debug')\n-BGP information\n-BGP keepalives\n-no pce neighbor as <0-65535>\n+no bgp log-neighbor-changes\n Negate a command or set its defaults\n-PCE Router Information specific commands\n-Disable PCE neighbor AS number\n-AS number of PCE neighbor\n-AS number in decimal <0-65535>\n-neighbor (A.B.C.D|X:X::X:X|WORD) activate\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Enable the Address Family for this Neighbor\n-set ip next-hop A.B.C.D\n-Set values in destination routing protocol\n-IP information\n-Next hop address\n-IP address of next hop\n-bgp deterministic-med\n BGP specific commands\n-Pick the best-MED path among paths advertised from the neighboring AS\n-clear bgp ipv6 (A.B.C.D|X:X::X:X) rsclient\n-Reset functions\n-BGP information\n-Address family\n-BGP neighbor IP address to clear\n-BGP IPv6 neighbor to clear\n-Soft reconfig for rsclient RIB\n-show bgp (ipv4|ipv6|unicast|multicast|vpn|encap) summary\n-Show running system information\n-BGP information\n-IP information\n-IPv6 Information\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Summary of BGP neighbor status\n-show ip prefix-list WORD seq <1-4294967295>\n-Show running system information\n-IP information\n-Build a prefix list\n-Name of a prefix list\n-sequence number of an entry\n-Sequence number\n+Log neighbor up/down and reset reason\n no refresh timer <10-1800>\n Adjust refresh parameters\n Unset refresh timer\n Timer value in seconds\n-show ip extcommunity-list\n-Show running system information\n-IP information\n-List extended-community list\n-show zebra\n+ip ospf area (A.B.C.D|<0-4294967295>) [A.B.C.D]\n+IP Information\n+OSPF interface commands\n+Enable OSPF on this interface\n+OSPF area ID in IP address format\n+OSPF area ID as a decimal value\n+Address of interface\n+packet-loss PERCENTAGE\n+Unidirectional Link Packet Loss\n+percentage of total traffic by 0.000003tep and less than 50.331642%\n+clear bgp peer-group WORD out\n+Reset functions\n+BGP information\n+Clear all members of peer-group\n+BGP peer-group name\n+Resend all outbound updates\n+aggregate-address A.B.C.D A.B.C.D summary-only as-set\n+Configure BGP aggregate entries\n+Aggregate address\n+Aggregate mask\n+Filter more specific routes from updates\n+Generate AS set path information\n+show ipv6 nht\n Show running system information\n-Zebra information\n-no ip rip receive version (1|2)\n-Negate a command or set its defaults\n-IP information\n-Routing Information Protocol\n-Advertisement reception\n-Version control\n-Version 1\n-Version 2\n-bandwidth <1-10000000>\n-Set bandwidth informational parameter\n-Bandwidth in kilobits\n-ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) (reject|blackhole) vrf <0-65535>\n IP information\n-Establish static routes\n-IPv6 destination prefix (e.g. 3ffe:506::/32)\n-IPv6 gateway address\n-IPv6 gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Specify the VRF\n-The VRF ID\n-no ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole) <1-255>\n+IPv6 nexthop tracking table\n+no ip route A.B.C.D/M (A.B.C.D|INTERFACE|null0) tag <1-4294967295> <1-255>\n Negate a command or set its defaults\n IP information\n Establish static routes\n IP destination prefix (e.g. 10.0.0.0/8)\n IP gateway address\n IP gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n+Null interface\n+Tag of this route\n+Tag value\n Distance value for this route\n-clear bgp ipv6 peer-group WORD in\n+clear bgp external\n Reset functions\n BGP information\n-Address family\n-Clear all members of peer-group\n-BGP peer-group name\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-show ip bgp flap-statistics A.B.C.D\n-Show running system information\n-IP information\n-BGP information\n-Display flap statistics of routes\n-Network in the BGP routing table to display\n-show bgp ipv4 prefix-list WORD\n+Clear all external peers\n+distribute-list WORD out (kernel|connected|static|rip|isis|bgp|pim|babel|nhrp)\n+Filter networks in routing updates\n+Access-list name\n+Filter outgoing routing updates\n+Kernel routes (not installed via the zebra RIB)\n+Connected routes (directly attached subnet or host)\n+Statically configured routes\n+Routing Information Protocol (RIP)\n+Intermediate System to Intermediate System (IS-IS)\n+Border Gateway Protocol (BGP)\n+Protocol Independent Multicast (PIM)\n+Babel routing protocol (Babel)\n+Next Hop Resolution Protocol (NHRP)\n+show bgp ipv4 encap neighbors A.B.C.D advertised-routes\n Show running system information\n BGP information\n-IP information\n-Display routes conforming to the prefix-list\n-IP prefix-list name\n-debug mroute\n-Debugging functions (see also 'undebug')\n-PIM interaction with kernel MFC cache\n-ip ospf priority <0-255>\n-IP Information\n-OSPF interface commands\n-Router priority\n-Priority\n-area (A.B.C.D|<0-4294967295>) range A.B.C.D/M\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Summarize routes matching address/mask (border routers only)\n-Area range prefix\n-no ip extcommunity-list expanded WORD (deny|permit) .LINE\n-Negate a command or set its defaults\n-IP information\n-Add a extended community list entry\n-Specify expanded extcommunity-list\n-Community list name\n-Specify community to reject\n-Specify community to accept\n-An ordered list as a regular-expression\n-set as-path prepend .<1-4294967295>\n+Address Family\n+Display ENCAP NLRI specific information\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Display the routes advertised to a BGP neighbor\n+set weight <0-4294967295>\n Set values in destination routing protocol\n-Transform BGP AS_PATH attribute\n-Prepend to the as-path\n-AS number\n-ip rip receive version 2 1\n-IP information\n-Routing Information Protocol\n-Advertisement reception\n-Version control\n-RIP version 2\n-RIP version 1\n-ipv6 bgp network X:X::X:X/M\n-IPv6 information\n-BGP information\n-Specify a network to announce via BGP\n-IPv6 prefix /, e.g., 3ffe::/16\n-ip large-community-list <1-99> (deny|permit)\n-IP information\n-Add a large community list entry\n-Large Community list number (standard)\n-Specify large community to reject\n-Specify large community to accept\n-ipv6 route X:X::X:X/M X:X::X:X INTERFACE (reject|blackhole) tag <1-4294967295> <1-255>vrf <0-65535>\n-no packet-loss\n-Negate a command or set its defaults\n-Disable Unidirectional Link Packet Loss on this interface\n-show bgp ipv4 (encap|multicast|unicast|vpn) dampening flap-statistics prefix-list WORD\n+BGP weight for routing table\n+Weight value\n+show bgp rsclient summary\n Show running system information\n BGP information\n-IP information\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Address Family Modifier\n-Display detailed information about dampening\n-Display flap statistics of routes\n-Display routes conforming to the prefix-list\n-IP prefix-list name\n-Configure OSPF Router-ID\n-specify by IPv4 address notation(e.g. 0.0.0.0)\n-clear ip bgp view WORD * soft in\n-Reset functions\n-IP information\n-BGP information\n-BGP view\n-view name\n-Clear all peers\n-Soft reconfig inbound and outbound updates\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (authentication|) (message-digest|null) (message-digest-key|) <1-255> md5 KEY\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Configure a virtual link\n-Router ID of the remote ABR\n-Enable authentication on this virtual link\n-dummy string \n-Use null authentication\n-Use message-digest authentication\n-Message digest authentication password (key)\n-dummy string \n-Use MD5 algorithm\n-The OSPF password (key)\n-show ip route supernets-only vrf all\n+Information about Route Server Clients\n+Summary of all Route Server Clients\n+show bgp ipv4 (unicast|multicast) A.B.C.D (bestpath|multipath)\n Show running system information\n-IP information\n-IP routing table\n-Show supernet entries only\n-Specify the VRF\n-All VRFs\n-clear ip bgp <1-4294967295> ipv4 (unicast|multicast) in prefix-filter\n-Reset functions\n-IP information\n BGP information\n-Clear peers with the AS number\n Address family\n Address Family modifier\n Address Family modifier\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-Push out prefix-list ORF and do inbound soft reconfig\n-set weight <0-4294967295>\n-Set values in destination routing protocol\n-BGP weight for routing table\n-Weight value\n-show bgp ipv6\n+IP prefix /, e.g., 35.0.0.0/8\n+Display only the bestpath\n+Display only multipaths\n+no neighbor (A.B.C.D|X:X::X:X|WORD) enforce-multihop\n+Negate a command or set its defaults\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Enforce EBGP neighbors perform multihop\n+show bgp ipv4 (multicast|unicast) neighbors (A.B.C.D|X:X::X:X) advertised-routes\n Show running system information\n BGP information\n-Address family\n-no debug rip packet\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-RIP information\n-RIP packet\n-clear ip bgp A.B.C.D ipv4 (unicast|multicast) soft in\n+Address Family modifier\n+Address Family modifier\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display the routes advertised to a BGP neighbor\n+clear bgp ipv6 <1-4294967295> soft in\n Reset functions\n-IP information\n BGP information\n-BGP neighbor address to clear\n Address family\n-Address Family modifier\n-Address Family modifier\n+Clear peers with the AS number\n Soft reconfig inbound and outbound updates\n Send route-refresh unless using 'soft-reconfiguration inbound'\n-show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) linkstate-id A.B.C.D (detail|dump|internal)\n+show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) adv-router A.B.C.D linkstate-id A.B.C.D (dump|internal)\n Show running system information\n IPv6 information\n Open Shortest Path First (OSPF) for IPv6\n Display Link state database\n Display Router LSAs\n Display Network LSAs\n Display Inter-Area-Prefix LSAs\n Display Inter-Area-Router LSAs\n Display As-External LSAs\n Display Group-Membership LSAs\n Display Type-7 LSAs\n Display Link LSAs\n Display Intra-Area-Prefix LSAs\n+Search by Advertising Router\n+Specify Advertising Router as IPv4 address notation\n Search by Link state ID\n Specify Link state ID as IPv4 address notation\n-Display details of LSAs\n Dump LSAs\n Display LSA's internal information\n-redistribute (ipv4|ipv6) (kernel|connected|static|rip|ripng|ospf|ospf6|bgp|pim|babel|nhrp) (level-1|level-2) {metric <0-16777215>|route-map WORD}\n-Redistribute information from another routing protocol\n-Redistribute IPv4 routes\n-Redistribute IPv6 routes\n-Kernel routes (not installed via the zebra RIB)\n-Connected routes (directly attached subnet or host)\n-Statically configured routes\n-Routing Information Protocol (RIP)\n-Routing Information Protocol next-generation (IPv6) (RIPng)\n-Open Shortest Path First (OSPFv2)\n-Open Shortest Path First (IPv6) (OSPFv3)\n-Border Gateway Protocol (BGP)\n-Protocol Independent Multicast (PIM)\n-Babel routing protocol (Babel)\n-Next Hop Resolution Protocol (NHRP)\n-Redistribute into level-1\n-Redistribute into level-2\n-Metric for redistributed routes\n-ISIS default metric\n-Route map reference\n-Pointer to route-map entries\n-no timers bgp <0-65535> <0-65535>\n-Negate a command or set its defaults\n-Adjust routing timers\n-BGP timers\n-Keepalive interval\n-Holdtime\n-no ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole) tag <1-4294967295> <1-255>\n-Negate a command or set its defaults\n+show ipv6 mroute vrf <0-65535>\n+Show running system information\n IP information\n-Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n-IP gateway address\n-IP gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Tag of this route\n-Tag value\n-Distance value for this route\n-show bgp view WORD (ipv4|ipv6) (unicast|multicast) community\n+IPv6 Multicast routing table\n+Specify the VRF\n+The VRF ID\n+show ip bgp large-community (AA:BB:CC)\n Show running system information\n+IP information\n BGP information\n-BGP view\n-View name\n-Address family\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Display routes matching the communities\n-no set vpnv4 next-hop A.B.C.D\n+Display routes matching the large-communities\n+large-community number\n+show ip pim upstream-join-desired\n+Show running system information\n+IP information\n+PIM information\n+PIM upstream join-desired\n+distance ospf6 intra-area <1-255>\n+Define an administrative distance\n+OSPF6 Administrative distance\n+Intra-area routes\n+Distance for intra-area routes\n+show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) A.B.C.D A.B.C.D\n+Show running system information\n+IPv6 information\n+Open Shortest Path First (OSPF) for IPv6\n+Display Link state database\n+Display Router LSAs\n+Display Network LSAs\n+Display Inter-Area-Prefix LSAs\n+Display Inter-Area-Router LSAs\n+Display As-External LSAs\n+Display Group-Membership LSAs\n+Display Type-7 LSAs\n+Display Link LSAs\n+Display Intra-Area-Prefix LSAs\n+Specify Link state ID as IPv4 address notation\n+Specify Advertising Router as IPv4 address notation\n+no bgp graceful-restart restart-time\n Negate a command or set its defaults\n-Set values in destination routing protocol\n-VPNv4 information\n-VPNv4 next-hop address\n-IP address of next hop\n-distance <1-255>\n-Administrative distance\n-Distance value\n-no ospf opaque-lsa\n+BGP specific commands\n+Graceful restart capability parameters\n+Set the time to wait to delete stale routes before a BGP open message is received\n+no ip multicast-routing\n Negate a command or set its defaults\n-OSPF specific commands\n-Disable the Opaque-LSA capability (rfc2370)\n-show bgp view WORD ipv4 (unicast|multicast) rsclient summary\n-no ip ospf mtu-ignore A.B.C.D\n-undebug bgp updates\n-Disable debugging functions (see also 'debug')\n+IP information\n+Global IP configuration subcommands\n+Enable IP multicast forwarding\n+test pim receive prune INTERFACE <0-65535> A.B.C.D A.B.C.D A.B.C.D A.B.C.D\n+Test PIM protocol\n+Test PIM message reception\n+Test PIM prune reception from neighbor\n+Interface\n+Neighbor holdtime\n+Upstream neighbor unicast destination address\n+Downstream neighbor unicast source address\n+Multicast group address\n+Unicast source address\n+no ip ospf hello-interval\n+Negate a command or set its defaults\n+IP Information\n+OSPF interface commands\n+Time between HELLO packets\n+no lsp-refresh-interval level-1\n+Negate a command or set its defaults\n+LSP refresh interval for Level 1 only in seconds\n+clear bgp ipv6 * soft\n+Reset functions\n BGP information\n-BGP updates\n-no ipv6 prefix-list WORD seq <1-4294967295> (deny|permit) (X:X::X:X/M|any)\n+Address family\n+Clear all peers\n+Soft reconfig inbound and outbound updates\n+no ipv6 access-list WORD (deny|permit) any\n Negate a command or set its defaults\n IPv6 information\n+Add an access list entry\n+IPv6 zebra access-list\n+Specify packets to reject\n+Specify packets to forward\n+Any prefixi to match\n+neighbor (A.B.C.D|X:X::X:X|WORD) capability dynamic\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Advertise capability to the peer\n+Advertise dynamic capability to this neighbor\n+no compatible rfc1583\n+Negate a command or set its defaults\n+OSPF compatibility list\n+compatible with RFC 1583\n+match origin (egp|igp|incomplete)\n+Match values from routing table\n+BGP origin code\n+remote EGP\n+local IGP\n+unknown heritage\n+ip prefix-list WORD seq <1-4294967295> (deny|permit) (A.B.C.D/M|any)\n+IP information\n Build a prefix list\n Name of a prefix list\n sequence number of an entry\n Sequence number\n Specify packets to reject\n Specify packets to forward\n-IPv6 prefix /, e.g., 3ffe::/16\n-Any prefix match. Same as \"::0/0 le 128\"\n-no debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all)\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-OSPF information\n-OSPF packets\n-OSPF Hello\n-OSPF Database Description\n-OSPF Link State Request\n-OSPF Link State Update\n-OSPF Link State Acknowledgment\n-OSPF all packets\n-show dmvpn\n+IP prefix /, e.g., 35.0.0.0/8\n+Any prefix match. Same as \"0.0.0.0/0 le 32\"\n+show bgp ipv4 community (AA:NN|local-AS|no-advertise|no-export)\n Show running system information\n-DMVPN information\n-show bgp ipv6 large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n+BGP information\n+IP information\n+Display routes matching the communities\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+show bgp ipv6 (unicast|multicast) rsclient (A.B.C.D|X:X::X:X)\n Show running system information\n BGP information\n Address family\n-Display routes matching the large-communities\n-large-community number\n-large-community number\n-large-community number\n-no redistribute (kernel|connected|static|rip|ospf|isis|pim|babel|nhrp) metric <0-4294967295>\n-Negate a command or set its defaults\n-Redistribute information from another routing protocol\n-Kernel routes (not installed via the zebra RIB)\n-Connected routes (directly attached subnet or host)\n-Statically configured routes\n-Routing Information Protocol (RIP)\n-Open Shortest Path First (OSPFv2)\n-Intermediate System to Intermediate System (IS-IS)\n-Protocol Independent Multicast (PIM)\n-Babel routing protocol (Babel)\n-Next Hop Resolution Protocol (NHRP)\n-Metric for redistributed routes\n-Default metric\n-no set local-preference\n+Address Family modifier\n+Address Family modifier\n+Information about Route Server Client\n+Neighbor address\n+IPv6 address\n+no set local-preference <0-4294967295>\n Negate a command or set its defaults\n Set values in destination routing protocol\n BGP local preference path attribute\n-no access-class [WORD]\n-Negate a command or set its defaults\n-Filter connections based on an IP access list\n-IP access list\n-no pce domain as <0-65535>\n-Negate a command or set its defaults\n-PCE Router Information specific commands\n-Disable PCE domain AS number\n-AS number where the PCE as visibilities for path computation\n-AS number in decimal <0-65535>\n-show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) * A.B.C.D (detail|dump|internal)\n-Show running system information\n-IPv6 information\n-Open Shortest Path First (OSPF) for IPv6\n-Display Link state database\n-Display Router LSAs\n-Display Network LSAs\n-Display Inter-Area-Prefix LSAs\n-Display Inter-Area-Router LSAs\n-Display As-External LSAs\n-Display Group-Membership LSAs\n-Display Type-7 LSAs\n-Display Link LSAs\n-Display Intra-Area-Prefix LSAs\n-Any Link state ID\n-Specify Advertising Router as IPv4 address notation\n-Display details of LSAs\n-Dump LSAs\n-Display LSA's internal information\n-no terminal monitor\n+Preference value\n+ip prefix-list WORD (deny|permit) A.B.C.D/M ge <0-32>\n+IP information\n+Build a prefix list\n+Name of a prefix list\n+Specify packets to reject\n+Specify packets to forward\n+IP prefix /, e.g., 35.0.0.0/8\n+Minimum prefix length to be matched\n+Minimum prefix length\n+ip prefix-list WORD seq <1-4294967295> (deny|permit) A.B.C.D/M le <0-32>\n+IP information\n+Build a prefix list\n+Name of a prefix list\n+sequence number of an entry\n+Sequence number\n+Specify packets to reject\n+Specify packets to forward\n+IP prefix /, e.g., 35.0.0.0/8\n+Maximum prefix length to be matched\n+Maximum prefix length\n+clear bgp view WORD * rsclient\n+Reset functions\n+BGP information\n+BGP view\n+view name\n+Clear all peers\n+Soft reconfig for rsclient RIB\n+no neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged med next-hop as-path\n Negate a command or set its defaults\n-Set terminal line parameters\n-Copy debug output to the current terminal line\n-show ipv6 bgp neighbors (A.B.C.D|X:X::X:X) advertised-routes\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+BGP attribute is propagated unchanged to this neighbor\n+Med attribute\n+Nexthop attribute\n+As-path attribute\n+show bgp ipv6 (multicast|unicast) neighbors (A.B.C.D|X:X::X:X) advertised-routes\n Show running system information\n-IPv6 information\n BGP information\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n Detailed information on TCP and BGP neighbor connections\n Neighbor to display information about\n Neighbor to display information about\n Display the routes advertised to a BGP neighbor\n-clear ip bgp peer-group WORD in\n+debug pim zebra\n+Debugging functions (see also 'undebug')\n+PIM protocol activity\n+ZEBRA protocol activity\n+no ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) tag <1-4294967295> <1-255>vrf <0-65535>\n+Negate a command or set its defaults\n+IP information\n+Establish static routes\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n+Set tag for this route\n+Tag value\n+Distance value for this prefix\n+Specify the VRF\n+The VRF ID\n+clear ip bgp peer-group WORD in prefix-filter\n Reset functions\n IP information\n BGP information\n Clear all members of peer-group\n BGP peer-group name\n Send route-refresh unless using 'soft-reconfiguration inbound'\n-isis hello-interval <1-600>\n-IS-IS commands\n-Set Hello interval\n-Hello interval value\n-Holdtime 1 seconds, interval depends on multiplier\n-bgp router-id A.B.C.D\n+Push out prefix-list ORF and do inbound soft reconfig\n+ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) tag <1-4294967295> <1-255>vrf <0-65535>\n+IP information\n+Establish static routes\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n+Set tag for this route\n+Tag value\n+Distance value for this prefix\n+Specify the VRF\n+The VRF ID\n+clear ip bgp <1-4294967295> soft\n+Reset functions\n+IP information\n BGP information\n-Override configured router identifier\n-Manually configured router identifier\n-accept-lifetime HH:MM:SS <1-31> MONTH <1993-2035> infinite\n-Set accept lifetime of the key\n-Time to start\n-Day of th month to start\n-Month of the year to start\n-Year to start\n-Never expires\n-bgp graceful-restart\n+Clear peers with the AS number\n+Soft reconfig inbound and outbound updates\n+neighbor (A.B.C.D|X:X::X:X|WORD) next-hop-self {all}\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Disable the next hop calculation for this neighbor\n+Apply also to ibgp-learned routes when acting as a route reflector\n+no network A.B.C.D/M rd ASN:nn_or_IP-address:nn tag WORD\n+Negate a command or set its defaults\n+Specify a network to announce via BGP\n+IP prefix /, e.g., 35.0.0.0/8\n+Specify Route Distinguisher\n+ENCAP Route Distinguisher\n+tag value\n+show ip route supernets-only\n+Show running system information\n+IP information\n+IP routing table\n+Show supernet entries only\n+neighbor A.B.C.D\n+Specify neighbor router\n+Neighbor IP address\n+no router ripng\n+Negate a command or set its defaults\n+Enable a routing process\n+Make RIPng instance command\n+no max-metric router-lsa on-startup\n+Negate a command or set its defaults\n+OSPF maximum / infinite-distance metric\n+Advertise own Router-LSA with infinite distance (stub router)\n+Automatically advertise stub Router-LSA on startup of OSPF\n+show ip bgp summary\n+Show running system information\n+IP information\n+BGP information\n+Summary of BGP neighbor status\n+bgp graceful-restart stalepath-time <1-3600>\n BGP specific commands\n Graceful restart capability parameters\n-show ipv6 ospf6 database self-originated (detail|dump|internal)\n-Show running system information\n-IPv6 information\n+Set the max time to hold onto restarting peer's stale paths\n+Delay value (seconds)\n+ip community-list <1-99> (deny|permit)\n+IP information\n+Add a community list entry\n+Community list number (standard)\n+Specify community to reject\n+Specify community to accept\n+pce address A.B.C.D\n+PCE Router Information specific commands\n+Stable IP address of the PCE\n+PCE address in IPv4 address format\n+no debug ospf6 abr\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n Open Shortest Path First (OSPF) for IPv6\n-Display Self-originated LSAs\n-Display details of LSAs\n-Dump LSAs\n-Display LSA's internal information\n-access-list (<1-99>|<1300-1999>) (deny|permit) any\n-Add an access list entry\n-IP standard access list\n-IP standard access list (expanded range)\n-Specify packets to reject\n-Specify packets to forward\n-Any source host\n-ava-bw BANDWIDTH\n-Unidirectional Available Bandwidth\n-Bytes/second (IEEE floating point format)\n-no ip route A.B.C.D A.B.C.D (reject|blackhole) tag <1-4294967295> <1-255>vrf <0-65535>\n+Debug OSPFv3 ABR function\n+no ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole) vrf <0-65535>\n Negate a command or set its defaults\n IP information\n Establish static routes\n IP destination prefix\n IP destination prefix mask\n+IP gateway address\n+IP gateway interface name\n Emit an ICMP unreachable when matched\n Silently discard pkts when matched\n-Tag of this route\n-Tag value\n-Distance value for this route\n Specify the VRF\n The VRF ID\n-neighbor WORD peer-group\n-Specify neighbor router\n-Neighbor tag\n-Configure peer-group\n-no isis psnp-interval\n+no ip prefix-list WORD (deny|permit) (A.B.C.D/M|any)\n Negate a command or set its defaults\n-IS-IS commands\n-Set PSNP interval in seconds\n-ospf message-digest-key <1-255> md5 KEY\n-OSPF interface commands\n-Message digest authentication password (key)\n-Use MD5 algorithm\n-The OSPF password (key)\n-ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) tag <1-4294967295>\n+IP information\n+Build a prefix list\n+Name of a prefix list\n+Specify packets to reject\n+Specify packets to forward\n+IP prefix /, e.g., 35.0.0.0/8\n+Any prefix match. Same as \"0.0.0.0/0 le 32\"\n+debug ospf6 spf process\n+Debugging functions (see also 'undebug')\n+Open Shortest Path First (OSPF) for IPv6\n+Debug SPF Calculation\n+Debug Detailed SPF Process\n+no key-string [LINE]\n+Negate a command or set its defaults\n+Unset key string\n+clear bgp external soft in\n+Reset functions\n+BGP information\n+Clear all external peers\n+Soft reconfig inbound and outbound updates\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+no match peer (A.B.C.D|X:X::X:X)\n+Negate a command or set its defaults\n+Match values from routing table\n+Match peer address\n+IP address of peer\n+IPv6 address of peer\n+show ip ssmpingd\n+Show running system information\n+IP information\n+ssmpingd operation\n+ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole)\n IP information\n Establish static routes\n-IPv6 destination prefix (e.g. 3ffe:506::/32)\n-IPv6 gateway address\n-IPv6 gateway interface name\n-Set tag for this route\n-Tag value\n-show ipv6 route (kernel|connected|static|ripng|ospf6|isis|bgp|babel|nhrp)\n+IP destination prefix\n+IP destination prefix mask\n+IP gateway address\n+IP gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+show bgp ipv6 (encap|multicast|unicast|vpn) dampening flap-statistics route-map WORD\n Show running system information\n+BGP information\n+IPv6 information\n+Address Family Modifier\n+Address Family Modifier\n+Address Family Modifier\n+Address Family Modifier\n+Display detailed information about dampening\n+Display flap statistics of routes\n+Display routes matching the route-map\n+A route-map to match on\n+no log-adjacency-changes\n+Negate a command or set its defaults\n+Log changes in adjacency state\n+show bgp ipv4 A.B.C.D/M longer-prefixes\n+Show running system information\n+BGP information\n IP information\n-IP routing table\n+IP prefix /, e.g., 35.0.0.0/8\n+Display route and more specific routes\n+no redistribute (kernel|connected|static|ospf6|isis|bgp|babel|nhrp)\n+Negate a command or set its defaults\n+Redistribute\n Kernel routes (not installed via the zebra RIB)\n Connected routes (directly attached subnet or host)\n Statically configured routes\n-Routing Information Protocol next-generation (IPv6) (RIPng)\n Open Shortest Path First (IPv6) (OSPFv3)\n Intermediate System to Intermediate System (IS-IS)\n Border Gateway Protocol (BGP)\n Babel routing protocol (Babel)\n Next Hop Resolution Protocol (NHRP)\n-(ip|ipv6) nhrp nhs (A.B.C.D|X:X::X:X|dynamic) nbma (A.B.C.D|FQDN)\n+no debug ripng zebra\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+RIPng configuration\n+Debug option set for ripng and zebra communication\n+area (A.B.C.D|<0-4294967295>) nssa no-summary\n+OSPF area parameters\n+OSPF area ID in IP address format\n+OSPF area ID as a decimal value\n+Configure OSPF area as nssa\n+Do not inject inter-area routes into nssa\n+show ip prefix-list detail\n+Show running system information\n IP information\n+Build a prefix list\n+Detail of prefix lists\n+ipv6 access-list WORD (deny|permit) X:X::X:X/M\n IPv6 information\n-Next Hop Resolution Protocol functions\n-Nexthop Server configuration\n-IPv4 protocol address\n-IPv6 protocol address\n-Automatic detection of protocol address\n-IPv4 NBMA address\n-Fully qualified domain name for NBMA address(es)\n-clear ip bgp A.B.C.D in\n+Add an access list entry\n+IPv6 zebra access-list\n+Specify packets to reject\n+Specify packets to forward\n+Prefix to match. e.g. 3ffe:506::/32\n+show bgp ipv6 encap neighbors A.B.C.D advertised-routes\n+clear ip pim interfaces\n Reset functions\n IP information\n-BGP information\n-BGP neighbor address to clear\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-no match ipv6 address WORD\n+PIM clear commands\n+Reset PIM interfaces\n+access-class WORD\n+Filter connections based on an IP access list\n+IP access list\n+area (A.B.C.D|<0-4294967295>) shortcut (default|enable|disable)\n+OSPF area parameters\n+OSPF area ID in IP address format\n+OSPF area ID as a decimal value\n+Configure the area's shortcutting mode\n+Set default shortcutting behavior\n+Enable shortcutting through the area\n+Disable shortcutting through the area\n+no match ip route-source prefix-list\n Negate a command or set its defaults\n Match values from routing table\n-IPv6 information\n-Match IPv6 address of route\n-IPv6 access-list name\n-clear ip bgp peer-group WORD soft out\n-Reset functions\n-IP information\n-BGP information\n-Clear all members of peer-group\n-BGP peer-group name\n-Soft reconfig inbound and outbound updates\n-Resend all outbound updates\n-clear bgp view WORD * soft in\n-Reset functions\n-BGP information\n-BGP view\n-view name\n-Clear all peers\n-Soft reconfig inbound and outbound updates\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-clear ip bgp view WORD * ipv4 (unicast|multicast) soft in\n-Reset functions\n-IP information\n-BGP information\n-BGP view\n-view name\n-Clear all peers\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Soft reconfig inbound and outbound updates\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-neighbor (A.B.C.D|X:X::X:X|WORD) nexthop-local unchanged\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Configure treatment of outgoing link-local nexthop attribute\n-Leave link-local nexthop unchanged for this peer\n-show ip ospf route\n-Show running system information\n IP information\n-OSPF information\n-OSPF routing table\n-show isis hostname\n-Show running system information\n-IS-IS information\n-IS-IS Dynamic hostname mapping\n-distance ospf6 intra-area <1-255> external <1-255>\n-Define an administrative distance\n-OSPF6 Administrative distance\n-Intra-area routes\n-Distance for intra-area routes\n-External routes\n-Distance for external routes\n-no debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) (detail|)\n+Match advertising source address of route\n+Match entries of prefix-lists\n+no res-bw\n Negate a command or set its defaults\n-Debugging functions\n-OSPF information\n-OSPF packets\n-OSPF Hello\n-OSPF Database Description\n-OSPF Link State Request\n-OSPF Link State Update\n-OSPF Link State Acknowledgment\n-OSPF all packets\n-Packet sent\n-Packet received\n-Detail Information\n-clear bgp ipv6 view WORD (A.B.C.D|X:X::X:X) rsclient\n-Reset functions\n-BGP information\n-Address family\n-BGP view\n-view name\n-BGP neighbor IP address to clear\n-BGP IPv6 neighbor to clear\n-Soft reconfig for rsclient RIB\n-clear bgp ipv6 external soft out\n-Reset functions\n-BGP information\n-Address family\n-Clear all external peers\n-Soft reconfig inbound and outbound updates\n-Resend all outbound updates\n-neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged next-hop as-path med\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-BGP attribute is propagated unchanged to this neighbor\n-Nexthop attribute\n-As-path attribute\n-Med attribute\n-no access-list (<1-99>|<1300-1999>) (deny|permit) host A.B.C.D\n+Disable Unidirectional Residual Bandwidth on this interface\n+ipv6 nd prefix X:X::X:X/M (off-link|)\n+Interface IPv6 config commands\n+Neighbor discovery\n+Prefix information\n+IPv6 prefix\n+Do not use prefix for onlink determination\n+no ip address A.B.C.D/M label LINE\n Negate a command or set its defaults\n-Add an access list entry\n-IP standard access list\n-IP standard access list (expanded range)\n-Specify packets to reject\n-Specify packets to forward\n-A single host address\n-Address to match\n-set src A.B.C.D\n-Set values in destination routing protocol\n-src address for route\n-src address\n-access-list (<100-199>|<2000-2699>) (deny|permit) ip host A.B.C.D any\n+Interface Internet Protocol config commands\n+Set the IP address of an interface\n+IP address (e.g. 10.0.0.1/8)\n+Label of this address\n+access-list (<100-199>|<2000-2699>) (deny|permit) ip host A.B.C.D A.B.C.D A.B.C.D\n Add an access list entry\n IP extended access list\n IP extended access list (expanded range)\n Specify packets to reject\n Specify packets to forward\n Any Internet Protocol\n A single source host\n Source address\n-Any destination host\n-show bgp view WORD rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M\n+Destination address\n+Destination Wildcard bits\n+no aggregate-address A.B.C.D A.B.C.D as-set\n+Negate a command or set its defaults\n+Configure BGP aggregate entries\n+Aggregate address\n+Aggregate mask\n+Generate AS set path information\n+show ipv6 ospf6 route X:X::X:X/M match detail\n Show running system information\n-BGP information\n-BGP view\n-View name\n-Information about Route Server Client\n-Neighbor address\n-IPv6 address\n-IPv6 prefix /, e.g., 3ffe::/16\n-no default-information originate\n+IPv6 Information\n+Open Shortest Path First (OSPF) for IPv6\n+Routing Table\n+Specify IPv6 prefix\n+Display routes which match the specified route\n+Detailed information\n+no match extcommunity (<1-99>|<100-500>|WORD)\n Negate a command or set its defaults\n-Default route information\n-Distribute default route\n-show ipv6 route X:X::X:X\n+Match values from routing table\n+Match BGP/VPN extended community list\n+Extended community-list number (standard)\n+Extended community-list number (expanded)\n+Extended community-list name\n+no match extcommunity\n+Negate a command or set its defaults\n+Match values from routing table\n+Match BGP/VPN extended community list\n+show ip bgp vpnv4 rd ASN:nn_or_IP-address:nn neighbors A.B.C.D\n+undebug pim events\n+Disable debugging functions (see also 'debug')\n+PIM protocol activity\n+PIM protocol events\n+ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole) <1-255> vrf <0-65535>\n+IP information\n+Establish static routes\n+IP destination prefix\n+IP destination prefix mask\n+IP gateway address\n+IP gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Distance value for this route\n+Specify the VRF\n+The VRF ID\n+show ip bgp flap-statistics filter-list WORD\n Show running system information\n IP information\n-IPv6 routing table\n-IPv6 Address\n-no area (A.B.C.D|<0-4294967295>) range A.B.C.D/M (advertise|not-advertise)\n+BGP information\n+Display flap statistics of routes\n+Display routes conforming to the filter-list\n+Regular expression access list name\n+aggregate-address A.B.C.D/M as-set\n+Configure BGP aggregate entries\n+Aggregate prefix\n+Generate AS set path information\n+no ip pim hello {<1-180> <1-180>}\n Negate a command or set its defaults\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Summarize routes matching address/mask (border routers only)\n-Area range prefix\n-Advertise this range (default)\n-DoNotAdvertise this range\n-show bgp ipv6 (encap|multicast|unicast|vpn) large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n+IP information\n+PIM information\n+Hello Interval\n+Time in seconds for Hello Interval\n+Time in seconds for Hold Interval\n+show bgp view WORD ipv6 neighbors\n Show running system information\n BGP information\n+BGP view\n+View name\n Address family\n-Address family modifier\n-Address family modifier\n-Address family modifier\n-Address family modifier\n-Display routes matching the large-communities\n-large-community number\n-large-community number\n-large-community number\n-large-community number\n-show bgp ipv6 (encap|multicast|unicast|vpn) dampening flap-statistics filter-list WORD\n+Detailed information on TCP and BGP neighbor connections\n+no ip prefix-list WORD description .LINE\n+Negate a command or set its defaults\n+IP information\n+Build a prefix list\n+Name of a prefix list\n+Prefix-list specific description\n+Up to 80 characters describing this prefix-list\n+no ipv6 nd home-agent-preference\n+Negate a command or set its defaults\n+Interface IPv6 config commands\n+Neighbor discovery\n+Home Agent preference\n+show bgp ipv4 (encap|multicast|unicast|vpn) dampening flap-statistics cidr-only\n Show running system information\n BGP information\n-IPv6 information\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n+Address Family\n+Address Family Modifier\n+Address Family Modifier\n+Address Family Modifier\n+Address Family Modifier\n Display detailed information about dampening\n Display flap statistics of routes\n-Display routes conforming to the filter-list\n-Regular expression access list name\n-show ip route (kernel|connected|static|rip|ospf|isis|bgp|pim|babel|nhrp)\n-Show running system information\n+Display only routes with non-natural netmasks\n+ipv6 nd home-agent-lifetime <0-65520>\n+Interface IPv6 config commands\n+Neighbor discovery\n+Home Agent lifetime\n+Home Agent lifetime in seconds (0 to track ra-lifetime)\n+no ip ospf cost A.B.C.D\n+Negate a command or set its defaults\n+IP Information\n+OSPF interface commands\n+Interface cost\n+Address of interface\n+no match ip address (<1-199>|<1300-2699>|WORD)\n+Negate a command or set its defaults\n+Match values from routing table\n IP information\n-IP routing table\n+Match address of route\n+IP access-list number\n+IP access-list number (expanded range)\n+IP Access-list name\n+spf-interval level-1 <1-120>\n+Minimum interval between SPF calculations\n+Set interval for level 1 only\n+Minimum interval between consecutive SPFs in seconds\n+redistribute (kernel|connected|static|ripng|ospf6|isis|babel|nhrp) metric <0-4294967295>\n+Redistribute information from another routing protocol\n Kernel routes (not installed via the zebra RIB)\n Connected routes (directly attached subnet or host)\n Statically configured routes\n-Routing Information Protocol (RIP)\n-Open Shortest Path First (OSPFv2)\n+Routing Information Protocol next-generation (IPv6) (RIPng)\n+Open Shortest Path First (IPv6) (OSPFv3)\n Intermediate System to Intermediate System (IS-IS)\n-Border Gateway Protocol (BGP)\n-Protocol Independent Multicast (PIM)\n Babel routing protocol (Babel)\n Next Hop Resolution Protocol (NHRP)\n-area A.B.C.D range X:X::X:X/M (advertise|not-advertise)\n-OSPF area parameters\n-Area ID (as an IPv4 notation)\n-Configured address range\n-Specify IPv6 prefix\n-no bgp network import-check\n-Negate a command or set its defaults\n-BGP specific commands\n-BGP network command\n-Check BGP network route exists in IGP\n-show ipv6 ospf6 interface prefix\n+Metric for redistributed routes\n+Default metric\n+neighbor (A.B.C.D|X:X::X:X) strict-capability-match\n+Specify neighbor router\n+Neighbor address\n+IPv6 address\n+Strict capability negotiation match\n+ipv6 nd home-agent-preference <0-65535>\n+Interface IPv6 config commands\n+Neighbor discovery\n+Home Agent preference\n+preference value (default is 0, least preferred)\n+show ip route A.B.C.D/M longer-prefixes vrf <0-65535>\n Show running system information\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Interface information\n-Display connected prefixes to advertise\n-debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv|detail)\n-Debugging functions\n-OSPF information\n-OSPF packets\n-OSPF Hello\n-OSPF Database Description\n-OSPF Link State Request\n-OSPF Link State Update\n-OSPF Link State Acknowledgment\n-OSPF all packets\n-Packet sent\n-Packet received\n-Detail information\n-no ip irdp shutdown\n-Negate a command or set its defaults\n-IP information\n-ICMP Router discovery no shutdown on this interface\n-ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE)\n IP information\n-Establish static routes\n-IPv6 destination prefix (e.g. 3ffe:506::/32)\n-IPv6 gateway address\n-IPv6 gateway interface name\n-no isis csnp-interval level-1\n+IP routing table\n+IP prefix /, e.g., 35.0.0.0/8\n+Show route matching the specified Network/Mask pair only\n+Specify the VRF\n+The VRF ID\n+no bgp default local-preference <0-4294967295>\n Negate a command or set its defaults\n-IS-IS commands\n-Set CSNP interval in seconds\n-Specify interval for level-1 CSNPs\n-area (A.B.C.D|<0-4294967295>) import-list NAME\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Set the filter for networks from other areas announced to the specified one\n-Name of the access-list\n+BGP specific commands\n+Configure BGP defaults\n+local preference (higher=more preferred)\n+Configure default local preference value\n+no debug bgp filters\n Negate a command or set its defaults\n-Adjust routing timers\n-Basic routing protocol update timers\n-Routing table update timer value in second. Default is 30.\n-Routing information timeout timer. Default is 180.\n-Garbage collection timer. Default is 120.\n-show bgp ipv6 vpn X:X::X:X/M\n+Debugging functions (see also 'undebug')\n+BGP information\n+BGP filters\n+show ip bgp view WORD rsclient (A.B.C.D|X:X::X:X) A.B.C.D/M\n Show running system information\n+IP information\n BGP information\n-Address Family\n-Display VPN NLRI specific information\n+BGP view\n+View name\n+Information about Route Server Client\n+Neighbor address\n+IPv6 address\n IP prefix /, e.g., 35.0.0.0/8\n-bgp multiple-instance\n-BGP information\n-Enable bgp multiple instance\n-clear ip bgp * ipv4 (unicast|multicast) out\n+clear ip bgp A.B.C.D ipv4 (unicast|multicast) soft in\n Reset functions\n IP information\n BGP information\n-Clear all peers\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Resend all outbound updates\n-show bgp ipv6 (unicast|multicast) X:X::X:X (bestpath|multipath)\n-Show running system information\n-BGP information\n+BGP neighbor address to clear\n Address family\n Address Family modifier\n Address Family modifier\n-Network in the BGP routing table to display\n-Display only the bestpath\n-Display only multipaths\n-show zebra client summary\n-Show running system information\n-Zebra information briefClient information brief\n-ip route A.B.C.D/M (reject|blackhole) tag <1-4294967295>\n-IP information\n-Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Set tag for this route\n-Tag value\n-Specify the VRF\n-The VRF ID\n-show ip ospf neighbor detail\n-Show running system information\n-IP information\n-OSPF information\n-Neighbor list\n-detail of all neighbors\n-no area (A.B.C.D|<0-4294967295>) shortcut (enable|disable)\n-Negate a command or set its defaults\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Deconfigure the area's shortcutting mode\n-Deconfigure enabled shortcutting through the area\n-Deconfigure disabled shortcutting through the area\n-tunnel source INTERFACE\n-clear ip ospf interface [IFNAME]\n-Reset functions\n-IP information\n-OSPF information\n-Interface information\n-Interface name\n-pce address A.B.C.D\n-PCE Router Information specific commands\n-Stable IP address of the PCE\n-PCE address in IPv4 address format\n-show debugging ospf\n-Show running system information\n-Debugging functions (see also 'undebug')\n-OSPF information\n-clear bgp <1-4294967295> soft out\n-Reset functions\n-BGP information\n-Clear peers with the AS number\n Soft reconfig inbound and outbound updates\n-Resend all outbound updates\n-ip igmp join A.B.C.D A.B.C.D\n-IP information\n-Enable IGMP operation\n-IGMP join multicast group\n-Multicast group address\n-Source address\n-show ip route A.B.C.D/M\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+show ip igmp join\n Show running system information\n IP information\n-IP routing table\n-IP prefix /, e.g., 35.0.0.0/8\n-no ip route A.B.C.D A.B.C.D (reject|blackhole) tag <1-4294967295> <1-255>\n-Negate a command or set its defaults\n+IGMP information\n+IGMP static join information\n+ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE|null0) <1-255>\n IP information\n Establish static routes\n IP destination prefix\n IP destination prefix mask\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Tag of this route\n-Tag value\n+IP gateway address\n+IP gateway interface name\n+Null interface\n Distance value for this route\n-show ip bgp ipv4 (unicast|multicast) dampening dampened-paths\n+no router zebra\n+Negate a command or set its defaults\n+Disable a routing process\n+Stop connection to zebra daemon\n+show ip bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n Show running system information\n IP information\n BGP information\n Address family\n Address Family modifier\n Address Family modifier\n-Display detailed information about dampening\n-Display paths suppressed due to dampening\n-no lsp-gen-interval <1-120>\n-Negate a command or set its defaults\n-Minimum interval between regenerating same LSP\n-Minimum interval in seconds\n-Configure BGP aggregate entries\n-Aggregate prefix\n-Filter more specific routes from updates\n-show ipv6 route summary prefix\n-Show running system information\n-IP information\n-IPv6 routing table\n-Summary of all IPv6 routes\n-Prefix routes\n-access-list (<1-99>|<1300-1999>) (deny|permit) host A.B.C.D\n-Add an access list entry\n-IP standard access list\n-IP standard access list (expanded range)\n-Specify packets to reject\n-Specify packets to forward\n-A single host address\n-Address to match\n-match ip route-source (<1-199>|<1300-2699>|WORD)\n-Match values from routing table\n-IP information\n-Match advertising source address of route\n-IP access-list number\n-IP access-list number (expanded range)\n-IP standard access-list name\n-show ip bgp vpnv4 all A.B.C.D\n-Show running system information\n-IP information\n-BGP information\n-Display VPNv4 NLRI specific information\n-Display information about all VPNv4 NLRIs\n-Network in the BGP routing table to display\n-no isis csnp-interval level-2\n-Negate a command or set its defaults\n-IS-IS commands\n-Set CSNP interval in seconds\n-Specify interval for level-2 CSNPs\n-ip extcommunity-list <1-99> (deny|permit) .AA:NN\n-IP information\n-Add a extended community list entry\n-Extended Community list number (standard)\n-Specify community to reject\n-Specify community to accept\n-Extended community attribute in 'rt aa:nn_or_IPaddr:nn' OR 'soo aa:nn_or_IPaddr:nn' format\n-debug static\n-Debugging functions (see also 'undebug')\n-PIM Static Multicast Route activity\n-show ip bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n-Show running system information\n-IP information\n-BGP information\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n-no ipv6 prefix-list WORD seq <1-4294967295> (deny|permit) X:X::X:X/M le <0-128> ge <0-128>\n-Negate a command or set its defaults\n-IPv6 information\n-Build a prefix list\n-Name of a prefix list\n-sequence number of an entry\n-Sequence number\n-Specify packets to reject\n-Specify packets to forward\n-IPv6 prefix /, e.g., 3ffe::/16\n-Maximum prefix length to be matched\n-Maximum prefix length\n-Minimum prefix length to be matched\n-Minimum prefix length\n-ip address A.B.C.D/M\n-Interface Internet Protocol config commands\n-Set the IP address of an interface\n-IP address (e.g. 10.0.0.1/8)\n-show bgp ipv6 (encap|multicast|unicast|vpn) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n-Show running system information\n+Exact match of the communities\n+clear ip bgp <1-4294967295> encap unicast in\n+Reset functions\n+IP information\n BGP information\n+Clear peers with the AS number\n Address family\n-Address family modifier\n-Address family modifier\n-Address family modifier\n-Address family modifier\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-Exact match of the communities\n-show bgp ipv4 large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n+Address Family modifier\n+Soft reconfig inbound update\n+show bgp ipv4 (encap|multicast|unicast|vpn) neighbors (A.B.C.D|X:X::X:X) received prefix-filter\n Show running system information\n BGP information\n IP information\n-Display routes matching the large-communities\n-large-community number\n-large-community number\n-large-community number\n-large-community number\n-no isis hello-interval <1-600> level-2\n-Negate a command or set its defaults\n-IS-IS commands\n-Set Hello interval\n-Hello interval value\n-Holdtime 1 second, interval depends on multiplier\n-Specify hello-interval for level-2 IIHs\n-(area-password|domain-password) clear WORD\n-Configure the authentication password for an area\n-Set the authentication password for a routing domain\n-Authentication type\n-Area password\n-no default-metric <0-16777214>\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display information received from a BGP neighbor\n+Display the prefixlist filter\n Negate a command or set its defaults\n-Set metric of redistributed routes\n-Default metric\n-no debug all bgp\n+Jump to another Route-Map after match+set\n+no ip address A.B.C.D/M\n Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-Enable all debugging\n-BGP information\n-debug ospf6 border-routers router-id A.B.C.D\n-Debugging functions (see also 'undebug')\n-Open Shortest Path First (OSPF) for IPv6\n-Debug border router\n-Debug specific border router\n-Specify border-router's router-id\n-show debugging zebra\n+Interface Internet Protocol config commands\n+Set the IP address of an interface\n+IP Address (e.g. 10.0.0.1/8)\n+show ip bgp flap-statistics\n Show running system information\n-Debugging information\n-Zebra configuration\n-no tunnel protection\n-Negate a command or set its defaults\n-NHRP/GRE integration\n-IPsec protection\n-ipv6 ospf6 network (broadcast|point-to-point)\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Network Type\n-Specify OSPFv6 broadcast network\n-Specify OSPF6 point-to-point network\n-no network A.B.C.D mask A.B.C.D route-map WORD\n-Negate a command or set its defaults\n-Specify a network to announce via BGP\n-Network number\n-Network mask\n-Network mask\n-Route-map to modify the attributes\n-Name of the route map\n-no ip multicast rpf-lookup-mode\n-Negate a command or set its defaults\n IP information\n-Multicast options\n-RPF lookup behavior\n-no ip irdp address A.B.C.D preference <0-2147483647>\n-Negate a command or set its defaults\n-IP information\n-Alter ICMP Router discovery preference this interface\n-Removes IRDP non-default preference\n-Select IRDP address\n-Old preference level\n-clear ip bgp A.B.C.D ipv4 (unicast|multicast) in prefix-filter\n+BGP information\n+Display flap statistics of routes\n+clear ip bgp * encap unicast soft\n Reset functions\n IP information\n BGP information\n-BGP neighbor address to clear\n+Clear all peers\n Address family\n-Address Family modifier\n-Address Family modifier\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-Push out the existing ORF prefix-list\n-debug ospf zebra (interface|redistribute)\n+Address Family Modifier\n+Soft reconfig\n+neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged next-hop (as-path|med)\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+BGP attribute is propagated unchanged to this neighbor\n+Nexthop attribute\n+As-path attribute\n+Med attribute\n+no debug mroute\n+Negate a command or set its defaults\n Debugging functions (see also 'undebug')\n-OSPF information\n-OSPF Zebra information\n-Zebra interface\n-Zebra redistribute\n-aggregate-address A.B.C.D/M as-set summary-only\n-Configure BGP aggregate entries\n-Aggregate prefix\n-Generate AS set path information\n-Filter more specific routes from updates\n-ipv6 ospf6 retransmit-interval <1-65535>\n+PIM interaction with kernel MFC cache\n+neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged as-path next-hop med\n+no match ipv6 next-hop X:X::X:X\n+Negate a command or set its defaults\n+Match values from routing table\n+IPv6 information\n+Match IPv6 next-hop address of route\n+IPv6 address of next hop\n+no ipv6 access-list WORD remark .LINE\n+Negate a command or set its defaults\n+IPv6 information\n+Add an access list entry\n+IPv6 zebra access-list\n+Access list entry comment\n+Comment up to 100 characters\n+no ip igmp query-max-response-time-dsec\n+Negate a command or set its defaults\n+IP information\n+Enable IGMP operation\n+IGMP max query response value (deciseconds)\n+show interface vrf all\n+Show running system information\n+Interface status and configuration\n+Specify the VRF\n+All VRFs\n+show ipv6 ospf6 route X:X::X:X/M longer detail\n+Show running system information\n IPv6 Information\n Open Shortest Path First (OSPF) for IPv6\n-Time between retransmitting lost link state advertisements\n-<1-65535> Seconds\n-show bgp ipv6 vpn rd ASN:nn_or_IP-address:nn X:X::X:X\n+Routing Table\n+Specify IPv6 prefix\n+Display routes longer than the specified route\n+Detailed information\n+no ip ospf message-digest-key <1-255>\n+Negate a command or set its defaults\n+IP Information\n+OSPF interface commands\n+Message digest authentication password (key)\n+show ip pim assert-metric\n Show running system information\n-BGP information\n-Address Family\n-Display VPN NLRI specific information\n-Display information for a route distinguisher\n-VPN Route Distinguisher\n-Network in the BGP routing table to display\n-test igmp receive report <0-65535> A.B.C.D <1-6> .LINE\n-Test IGMP protocol\n-Test IGMP message\n-Test IGMP report\n-IGMP group address\n-Record type\n-no access-list (<1-99>|<1300-1999>) (deny|permit) A.B.C.D\n+IP information\n+PIM information\n+PIM interface assert metric\n+debug ospf ism\n+Debugging functions (see also 'undebug')\n+OSPF information\n+OSPF Interface State Machine\n+ip ospf network (broadcast|non-broadcast|point-to-multipoint|point-to-point)\n+IP Information\n+OSPF interface commands\n+Network type\n+Specify OSPF broadcast multi-access network\n+Specify OSPF NBMA network\n+Specify OSPF point-to-multipoint network\n+Specify OSPF point-to-point network\n+no debug bgp fsm\n Negate a command or set its defaults\n-Add an access list entry\n-IP standard access list\n-IP standard access list (expanded range)\n+Debugging functions (see also 'undebug')\n+BGP information\n+Finite State Machine\n+ip prefix-list WORD (deny|permit) (A.B.C.D/M|any)\n+IP information\n+Build a prefix list\n+Name of a prefix list\n Specify packets to reject\n Specify packets to forward\n-Address to match\n-show ip community-list (<1-500>|WORD)\n+IP prefix /, e.g., 35.0.0.0/8\n+Any prefix match. Same as \"0.0.0.0/0 le 32\"\n+show ip bgp flap-statistics A.B.C.D/M\n Show running system information\n IP information\n-List community-list\n-Community-list number\n-Community-list name\n-no distance <1-255> X:X::X:X/M WORD\n-no neighbor (A.B.C.D|X:X::X:X) port <0-65535>\n-Negate a command or set its defaults\n-Specify neighbor router\n-Neighbor address\n-IPv6 address\n-Neighbor's BGP port\n-TCP port number\n-ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole) <1-255> vrf <0-65535>\n+BGP information\n+Display flap statistics of routes\n+IP prefix /, e.g., 35.0.0.0/8\n+ip prefix-list WORD seq <1-4294967295> (deny|permit) A.B.C.D/M ge <0-32> le <0-32>\n IP information\n-Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n-IP gateway address\n-IP gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Distance value for this route\n-Specify the VRF\n-The VRF ID\n-show ip bgp regexp .LINE\n+Build a prefix list\n+Name of a prefix list\n+sequence number of an entry\n+Sequence number\n+Specify packets to reject\n+Specify packets to forward\n+IP prefix /, e.g., 35.0.0.0/8\n+Minimum prefix length to be matched\n+Minimum prefix length\n+Maximum prefix length to be matched\n+Maximum prefix length\n+show bgp (ipv4|ipv6|unicast|multicast|vpn|encap) summary\n Show running system information\n-IP information\n BGP information\n-Display routes matching the AS path regular expression\n-A regular-expression to match the BGP AS paths\n-offset-list WORD (in|out) <0-16>\n-Modify RIP metric\n-Access-list name\n-For incoming updates\n-For outgoing updates\n-Metric value\n+IP information\n+IPv6 Information\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n+Summary of BGP neighbor status\n show ip bgp dampening flap-statistics prefix-list WORD\n Show running system information\n IP information\n BGP information\n Display detailed information about dampening\n Display flap statistics of routes\n Display routes conforming to the prefix-list\n IP prefix-list name\n-no ip extcommunity-list <100-500> (deny|permit) .LINE\n+timers basic <5-2147483647> <5-2147483647> <5-2147483647>\n+Adjust routing timers\n+Basic routing protocol update timers\n+Routing table update timer value in second. Default is 30.\n+Routing information timeout timer. Default is 180.\n+Garbage collection timer. Default is 120.\n+debug isis spf-statistics \n+Debugging functions (see also 'undebug')\n+IS-IS information\n+IS-IS SPF Timing and Statistic Data\n+no match metric\n+Negate a command or set its defaults\n+Match values from routing table\n+Match metric of route\n+no ipv6 route X:X::X:X/M X:X::X:X INTERFACE vrf <0-65535>\n+Negate a command or set its defaults\n+IP information\n+Establish static routes\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n+Specify the VRF\n+The VRF ID\n+show bgp ipv6 vpn neighbors (A.B.C.D|X:X::X:X) advertised-routes\n+Show running system information\n+BGP information\n+Address Family\n+Display VPN NLRI specific information\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Display the routes advertised to a BGP neighbor\n+clear ip bgp dampening\n+Reset functions\n+IP information\n+BGP information\n+Clear route flap dampening information\n+no ip extcommunity-list <1-99> (deny|permit) .AA:NN\n Negate a command or set its defaults\n IP information\n Add a extended community list entry\n-Extended Community list number (expanded)\n+Extended Community list number (standard)\n Specify community to reject\n Specify community to accept\n-An ordered list as a regular-expression\n-network A.B.C.D mask A.B.C.D\n-Specify a network to announce via BGP\n-Network number\n-Network mask\n-Network mask\n-access-list WORD (deny|permit) A.B.C.D/M exact-match\n-Add an access list entry\n-IP zebra access-list name\n+Extended community attribute in 'rt aa:nn_or_IPaddr:nn' OR 'soo aa:nn_or_IPaddr:nn' format\n+no match interface\n+Negate a command or set its defaults\n+Match values from routing table\n+Match first hop interface of route\n+timers lsa arrival <0-1000>\n+Adjust routing timers\n+Throttling link state advertisement delays\n+OSPF minimum arrival interval delay\n+Delay (msec) between accepted LSAs\n+no ip mroute A.B.C.D/M (A.B.C.D|INTERFACE) <1-255> vrf <0-65535>\n+show bgp view WORD ipv6\n+Show running system information\n+BGP information\n+BGP view\n+View name\n+Address family\n+no neighbor (A.B.C.D|X:X::X:X|WORD) maximum-prefix <1-4294967295> <1-100> warning-only\n+Negate a command or set its defaults\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Maximum number of prefix accept from this peer\n+maximum no. of prefix limit\n+Threshold value (%) at which to generate a warning msg\n+Only give warning message when limit is exceeded\n+distance ospf6 inter-area <1-255>\n+Define an administrative distance\n+OSPF6 Administrative distance\n+Inter-area routes\n+Distance for inter-area routes\n+no debug ospf6 neighbor\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+Open Shortest Path First (OSPF) for IPv6\n+Debug OSPFv3 Neighbor\n+show ip bgp nexthop detail\n+Show running system information\n+IP information\n+BGP information\n+BGP nexthop table\n+area (A.B.C.D|<0-4294967295>) nssa (translate-candidate|translate-never|translate-always)\n+OSPF area parameters\n+OSPF area ID in IP address format\n+OSPF area ID as a decimal value\n+Configure OSPF area as nssa\n+Configure NSSA-ABR for translate election (default)\n+Configure NSSA-ABR to never translate\n+Configure NSSA-ABR to always translate\n+debug zebra packet (recv|send|detail)\n+Debugging functions (see also 'undebug')\n+Zebra configuration\n+Debug option set for zebra packet\n+Debug option set for receive packet\n+Debug option set for send packet\n+no area (A.B.C.D|<0-4294967295>) range A.B.C.D/M\n+Negate a command or set its defaults\n+OSPF area parameters\n+OSPF area ID in IP address format\n+OSPF area ID as a decimal value\n+Summarize routes matching address/mask (border routers only)\n+Area range prefix\n+set metric <0-4294967295>\n+Set value\n+Metric value for destination routing protocol\n+Metric value\n+ip prefix-list WORD (deny|permit) A.B.C.D/M ge <0-32> le <0-32>\n+IP information\n+Build a prefix list\n+Name of a prefix list\n Specify packets to reject\n Specify packets to forward\n-Prefix to match. e.g. 10.0.0.0/8\n-Exact match of the prefixes\n-no set vpnv4 next-hop\n+IP prefix /, e.g., 35.0.0.0/8\n+Minimum prefix length to be matched\n+Minimum prefix length\n+Maximum prefix length to be matched\n+Maximum prefix length\n+show isis topology level-2\n+Show running system information\n+IS-IS information\n+IS-IS paths to Intermediate Systems\n+Paths to all level-2 routers in the domain\n+distance ospf6 intra-area <1-255> inter-area <1-255> external <1-255>\n+Define an administrative distance\n+OSPF6 Administrative distance\n+Intra-area routes\n+Distance for intra-area routes\n+Inter-area routes\n+Distance for inter-area routes\n+External routes\n+Distance for external routes\n+no access-list (<100-199>|<2000-2699>) (deny|permit) ip any host A.B.C.D\n Negate a command or set its defaults\n-Set values in destination routing protocol\n-VPNv4 information\n-VPNv4 next-hop address\n-show ip ospf database (asbr-summary|external|network|router|summary|nssa-external|opaque-link|opaque-area|opaque-as) A.B.C.D (self-originate|)\n+Add an access list entry\n+IP extended access list\n+IP extended access list (expanded range)\n+Specify packets to reject\n+Specify packets to forward\n+Any Internet Protocol\n+Any source host\n+A single destination host\n+Destination address\n+show ip bgp large-community\n Show running system information\n IP information\n-OSPF information\n-Database summary\n-ASBR summary link states\n-External link states\n-Network link states\n-Router link states\n-Network summary link states\n-NSSA external link state\n-Link local Opaque-LSA\n-Link area Opaque-LSA\n-Link AS Opaque-LSA\n-Link State ID (as an IP address)\n-Self-originated link states\n-isis hello-multiplier <2-100> level-2\n-IS-IS commands\n-Set multiplier for Hello holding time\n-Hello multiplier value\n-Specify hello multiplier for level-2 IIHs\n+BGP information\n+Display routes matching the large-communities\n+show bgp ipv4 (unicast|multicast) A.B.C.D\n+Show running system information\n+BGP information\n+Address family\n+Address Family modifier\n+Address Family modifier\n+Network in the BGP routing table to display\n show ipv6 ospf6 database * * A.B.C.D (detail|dump|internal)\n Show running system information\n IPv6 information\n Open Shortest Path First (OSPF) for IPv6\n Display Link state database\n Any Link state Type\n Any Link state ID\n Specify Advertising Router as IPv4 address notation\n Display details of LSAs\n Dump LSAs\n Display LSA's internal information\n-Define an administrative distance\n-Administrative distance\n-IP source prefix\n-distance ospf6 external <1-255> inter-area <1-255>\n-Define an administrative distance\n-OSPF6 Administrative distance\n-External routes\n-Distance for external routes\n-Inter-area routes\n-Distance for inter-area routes\n-no debug ospf6 border-routers\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n+show ipv6 ospf6 linkstate network A.B.C.D A.B.C.D\n+Show running system information\n+IPv6 Information\n Open Shortest Path First (OSPF) for IPv6\n-Debug border router\n-ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole) tag <1-4294967295>vrf <0-65535>\n+Display linkstate routing table\n+Display Network Entry\n+Specify Router ID as IPv4 address notation\n+Specify Link state ID as IPv4 address notation\n+clear ip bgp * in\n+Reset functions\n+IP information\n+BGP information\n+Clear all peers\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+clear ip bgp * rsclient\n+Reset functions\n+IP information\n+BGP information\n+Clear all peers\n+Soft reconfig for rsclient RIB\n+ipv6 route X:X::X:X/M X:X::X:X INTERFACE (reject|blackhole) tag <1-4294967295> <1-255>vrf <0-65535>\n IP information\n Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n-IP gateway address\n-IP gateway interface name\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n Emit an ICMP unreachable when matched\n Silently discard pkts when matched\n Set tag for this route\n Tag value\n+Distance value for this prefix\n Specify the VRF\n The VRF ID\n-compatible rfc1583\n-OSPF compatibility list\n-compatible with RFC 1583\n-no lsp-refresh-interval level-1 <1-65235>\n-Negate a command or set its defaults\n-LSP refresh interval for Level 1 only\n-LSP refresh interval for Level 1 only in seconds\n-area A.B.C.D export-list NAME\n-OSPFv6 area parameters\n-OSPFv6 area ID in IP address format\n-Set the filter for networks announced to other areas\n-Name of the acess-list\n-exec-timeout <0-35791>\n-Set timeout value\n-Timeout value in minutes\n-show ipv6 ospf6 database self-originated\n-Show running system information\n-IPv6 information\n-Open Shortest Path First (OSPF) for IPv6\n-Display Self-originated LSAs\n-no match ip route-source\n-Negate a command or set its defaults\n-Match values from routing table\n-IP information\n-Match advertising source address of route\n-access-list (<100-199>|<2000-2699>) (deny|permit) ip host A.B.C.D host A.B.C.D\n-Add an access list entry\n-IP extended access list\n-IP extended access list (expanded range)\n-Specify packets to reject\n-Specify packets to forward\n-Any Internet Protocol\n-A single source host\n-Source address\n-A single destination host\n-Destination address\n-no debug rip events\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-RIP information\n-RIP events\n-show ip route A.B.C.D/M longer-prefixes\n-Show running system information\n-IP information\n-IP routing table\n-IP prefix /, e.g., 35.0.0.0/8\n-Show route matching the specified Network/Mask pair only\n-show bgp ipv6 (unicast|multicast) rsclient (A.B.C.D|X:X::X:X)\n+show bgp ipv4 (unicast|multicast) large-community-list (<1-500>|WORD)\n Show running system information\n BGP information\n Address family\n Address Family modifier\n Address Family modifier\n-Information about Route Server Client\n-Neighbor address\n-IPv6 address\n-show isis topology level-2\n-Show running system information\n-IS-IS information\n-IS-IS paths to Intermediate Systems\n-Paths to all level-2 routers in the domain\n-show ip bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n+Display routes matching the large-community-list\n+large-community-list number\n+large-community-list name\n+show ip route (kernel|connected|static|rip|ospf|isis|bgp|pim|babel|nhrp) vrf <0-65535>\n Show running system information\n IP information\n+IP routing table\n+Kernel routes (not installed via the zebra RIB)\n+Connected routes (directly attached subnet or host)\n+Statically configured routes\n+Routing Information Protocol (RIP)\n+Open Shortest Path First (OSPFv2)\n+Intermediate System to Intermediate System (IS-IS)\n+Border Gateway Protocol (BGP)\n+Protocol Independent Multicast (PIM)\n+Babel routing protocol (Babel)\n+Next Hop Resolution Protocol (NHRP)\n+Specify the VRF\n+The VRF ID\n+no redistribute rip\n+Negate a command or set its defaults\n+Redistribute information from another routing protocol\n+Routing Information Protocol (RIP)\n+show bgp ipv6 (encap|multicast|unicast|vpn) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n+Show running system information\n BGP information\n+Address family\n+Address family modifier\n+Address family modifier\n+Address family modifier\n+Address family modifier\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n@@ -8410,3466 +7427,3412 @@\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n Exact match of the communities\n-show bgp neighbors (A.B.C.D|X:X::X:X) received-routes\n+no ip route A.B.C.D/M (A.B.C.D|INTERFACE|null0) tag <1-4294967295>\n+Negate a command or set its defaults\n+IP information\n+Establish static routes\n+IP destination prefix (e.g. 10.0.0.0/8)\n+IP gateway address\n+IP gateway interface name\n+Null interface\n+Tag of this route\n+Tag value\n+show ip rip status\n Show running system information\n-BGP information\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display the received routes from neighbor\n-show bgp ipv4 (encap|multicast|unicast|vpn) prefix-list WORD\n+IP information\n+Show RIP routes\n+IP routing protocol process parameters and statistics\n+show bgp ipv6 large-community (AA:BB:CC) (AA:BB:CC)\n Show running system information\n BGP information\n Address family\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Display routes conforming to the prefix-list\n-IP prefix-list name\n-ip community-list <1-99> (deny|permit)\n+Display routes matching the large-communities\n+large-community number\n+large-community number\n+show ipv6 bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n+Show running system information\n+IPv6 information\n+BGP information\n+Display routes matching the communities\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+Exact match of the communities\n+debug ospf6 route (table|intra-area|inter-area|memory)\n+Debugging functions (see also 'undebug')\n+Open Shortest Path First (OSPF) for IPv6\n+Debug route table calculation\n+Debug detail\n+Debug intra-area route calculation\n+Debug inter-area route calculation\n+Debug route memory use\n+clear ip bgp A.B.C.D soft in\n+Reset functions\n IP information\n-Add a community list entry\n-Community list number (standard)\n-Specify community to reject\n-Specify community to accept\n-no ipv6 nd mtu\n-Negate a command or set its defaults\n-Interface IPv6 config commands\n-Neighbor discovery\n-Advertised MTU\n-no ipv6 access-list WORD remark .LINE\n+BGP information\n+BGP neighbor address to clear\n+Soft reconfig inbound and outbound updates\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+no ip route A.B.C.D/M (reject|blackhole) <1-255> vrf <0-65535>\n Negate a command or set its defaults\n-IPv6 information\n-Add an access list entry\n-IPv6 zebra access-list\n-Access list entry comment\n-Comment up to 100 characters\n-no debug ripng events\n+IP information\n+Establish static routes\n+IP destination prefix (e.g. 10.0.0.0/8)\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Distance value for this route\n+Specify the VRF\n+The VRF ID\n+ip route A.B.C.D A.B.C.D (reject|blackhole) tag <1-4294967295>vrf <0-65535>\n+IP information\n+Establish static routes\n+IP destination prefix\n+IP destination prefix mask\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Set tag for this route\n+Tag value\n+Specify the VRF\n+The VRF ID\n+no bgp dampening <1-45> <1-20000> <1-20000> <1-255>\n Negate a command or set its defaults\n+BGP Specific commands\n+Enable route-flap dampening\n+Half-life time for the penalty\n+Value to start reusing a route\n+Value to start suppressing a route\n+Maximum duration to suppress a stable route\n+ospf retransmit-interval <3-65535>\n+OSPF interface commands\n+Time between retransmitting lost link state advertisements\n+debug ripng zebra\n Debugging functions (see also 'undebug')\n RIPng configuration\n-Debug option set for ripng events\n-clear bgp ipv6 <1-4294967295>\n-Reset functions\n-BGP information\n-Address family\n-Clear peers with the AS number\n-no debug ospf event\n+Debug option set for ripng and zebra communication\n+no max-lsp-lifetime level-1\n+Negate a command or set its defaults\n+LSP lifetime for Level 1 only in seconds\n+no bgp default ipv4-unicast\n Negate a command or set its defaults\n+BGP specific commands\n+Configure BGP defaults\n+Activate ipv4-unicast for a peer by default\n+show ip route summary vrf <0-65535>\n+Show running system information\n+IP information\n+IP routing table\n+Summary of all routes\n+Specify the VRF\n+The VRF ID\n+debug isis protocol-errors\n Debugging functions (see also 'undebug')\n-OSPF information\n-OSPF event information\n-clear ip bgp external\n-Reset functions\n+IS-IS information\n+IS-IS LSP protocol errors\n+ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) (reject|blackhole) vrf <0-65535>\n+no ip igmp query-max-response-time\n+Negate a command or set its defaults\n IP information\n-BGP information\n-Clear all external peers\n-clear ip bgp view WORD * rsclient\n+Enable IGMP operation\n+IGMP max query response value (seconds)\n+clear bgp ipv6 external WORD out\n Reset functions\n-IP information\n-BGP information\n-BGP view\n-view name\n-Clear all peers\n-Soft reconfig for rsclient RIB\n-isis psnp-interval <1-120> level-1\n-IS-IS commands\n-Set PSNP interval in seconds\n-PSNP interval value\n-Specify interval for level-1 PSNPs\n-debug bgp as4\n-Debugging functions (see also 'undebug')\n BGP information\n-BGP AS4 actions\n-ospf opaque-lsa\n-OSPF specific commands\n-Enable the Opaque-LSA capability (rfc2370)\n-distance ospf6 inter-area <1-255>\n+Address family\n+Clear all external peers\n+Resend all outbound updates\n+no nhrp event socket [SOCKET]\n+Negate a command or set its defaults\n+Next Hop Resolution Protocol functions\n+Event Manager commands\n+Event Manager unix socket path\n+Unix path for the socket\n+accept-lifetime HH:MM:SS <1-31> MONTH <1993-2035> infinite\n+Set accept lifetime of the key\n+Time to start\n+Day of th month to start\n+Month of the year to start\n+Year to start\n+Never expires\n+no distance bgp <1-255> <1-255> <1-255>\n+Negate a command or set its defaults\n Define an administrative distance\n-OSPF6 Administrative distance\n-Inter-area routes\n-Distance for inter-area routes\n-(ip|ipv6) nhrp registration (no-unique)\n+BGP distance\n+Distance for routes external to the AS\n+Distance for routes internal to the AS\n+Distance for local routes\n+ip mroute A.B.C.D/M (A.B.C.D|INTERFACE) vrf <0-65535>\n IP information\n-IPv6 information\n-Next Hop Resolution Protocol functions\n-Registration configuration\n-Don't set unique flag\n-show ip bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export)\n+Configure static unicast route into MRIB for multicast RPF lookup\n+IP destination prefix (e.g. 10.0.0.0/8)\n+Nexthop address\n+Nexthop interface name\n+Specify the VRF\n+The VRF ID\n+no enable\n+Negate a command or set its defaults\n+Disable link parameters on this interface\n+no version <1-2>\n+Negate a command or set its defaults\n+Set routing protocol version\n+show bgp ipv4 (unicast|multicast) community-list (<1-500>|WORD) exact-match\n Show running system information\n-IP information\n BGP information\n Address family\n Address Family modifier\n Address Family modifier\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-show ipv6 route X:X::X:X vrf <0-65535>\n+Display routes matching the community-list\n+community-list number\n+community-list name\n+Exact match of the communities\n+show ip community-list (<1-500>|WORD)\n Show running system information\n IP information\n-IPv6 routing table\n-IPv6 Address\n-Specify the VRF\n-The VRF ID\n-no access-list (<1-99>|<100-199>|<1300-1999>|<2000-2699>|WORD)\n-Negate a command or set its defaults\n-Add an access list entry\n-IP standard access list\n-IP extended access list\n-IP standard access list (expanded range)\n-IP extended access list (expanded range)\n-IP zebra access-list name\n-ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) <1-255>\n-IP information\n-Establish static routes\n-IPv6 destination prefix (e.g. 3ffe:506::/32)\n-IPv6 gateway address\n-IPv6 gateway interface name\n-Distance value for this prefix\n-clear bgp ipv6 peer-group WORD soft in\n+List community-list\n+Community-list number\n+Community-list name\n+set large-community .AA:BB:CC\n+Set values in destination routing protocol\n+BGP large community attribute\n+Large Community number in aa:bb:cc format or additive\n+ipv6 route X:X::X:X/M X:X::X:X INTERFACE tag <1-4294967295> <1-255>vrf <0-65535>\n+clear ip bgp peer-group WORD soft\n Reset functions\n+IP information\n BGP information\n-Address family\n Clear all members of peer-group\n BGP peer-group name\n Soft reconfig inbound and outbound updates\n+clear bgp ipv6 (A.B.C.D|X:X::X:X) in\n+Reset functions\n+BGP information\n+Address family\n+BGP neighbor address to clear\n+BGP IPv6 neighbor to clear\n Send route-refresh unless using 'soft-reconfiguration inbound'\n-show bgp ipv4 community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)\n-Show running system information\n+clear bgp ipv6 (A.B.C.D|X:X::X:X) out\n+Reset functions\n BGP information\n-IP information\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-pce scope BITPATTERN\n-PCE Router Information specific commands\n-Path scope visibilities of the PCE for path computation\n-32-bit Hexadecimal value\n-no redistribute (kernel|connected|static|ospf|isis|bgp|pim|babel|nhrp)\n+Address family\n+BGP neighbor address to clear\n+BGP IPv6 neighbor to clear\n+Resend all outbound updates\n+no match community (<1-99>|<100-500>|WORD) exact-match\n Negate a command or set its defaults\n-Redistribute information from another routing protocol\n-Kernel routes (not installed via the zebra RIB)\n-Connected routes (directly attached subnet or host)\n-Statically configured routes\n-Open Shortest Path First (OSPFv2)\n-Intermediate System to Intermediate System (IS-IS)\n-Border Gateway Protocol (BGP)\n-Protocol Independent Multicast (PIM)\n-Babel routing protocol (Babel)\n-Next Hop Resolution Protocol (NHRP)\n-no key-string [LINE]\n+Match values from routing table\n+Match BGP community list\n+Community-list number (standard)\n+Community-list number (expanded)\n+Community-list name\n+Do exact matching of communities\n+no debug igmp events\n Negate a command or set its defaults\n-Unset key string\n-ip ospf mtu-ignore\n-IP Information\n-OSPF interface commands\n-Disable mtu mismatch detection\n-ipv6 bgp aggregate-address X:X::X:X/M\n-IPv6 information\n-BGP information\n-Configure BGP aggregate entries\n-Aggregate prefix\n-no isis passive\n+Debugging functions (see also 'undebug')\n+IGMP protocol activity\n+IGMP protocol events\n+no set weight\n+Negate a command or set its defaults\n+Set values in destination routing protocol\n+BGP weight for routing table\n+no isis csnp-interval <1-600> level-1\n Negate a command or set its defaults\n IS-IS commands\n-Configure the passive mode for interface\n-show bgp X:X::X:X/M\n-Show running system information\n-BGP information\n-IPv6 prefix /\n-show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) A.B.C.D self-originated\n+Set CSNP interval in seconds\n+CSNP interval value\n+Specify interval for level-1 CSNPs\n+show ipv6 mbgp large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n Show running system information\n IPv6 information\n-Open Shortest Path First (OSPF) for IPv6\n-Display Link state database\n-Display Router LSAs\n-Display Network LSAs\n-Display Inter-Area-Prefix LSAs\n-Display Inter-Area-Router LSAs\n-Display As-External LSAs\n-Display Group-Membership LSAs\n-Display Type-7 LSAs\n-Display Link LSAs\n-Display Intra-Area-Prefix LSAs\n-Specify Link state ID as IPv4 address notation\n-Display Self-originated LSAs\n-show bgp view WORD ipv6 neighbors (A.B.C.D|X:X::X:X)\n+MBGP information\n+Display routes matching the large-communities\n+large-community number\n+large-community number\n+large-community number\n+clear bgp (A.B.C.D|X:X::X:X) soft in\n+Reset functions\n+BGP information\n+BGP neighbor address to clear\n+BGP IPv6 neighbor to clear\n+Soft reconfig inbound and outbound updates\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+no neighbor (A.B.C.D|X:X::X:X|WORD) distribute-list (<1-199>|<1300-2699>|WORD) (in|out)\n+Negate a command or set its defaults\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Filter updates to/from this neighbor\n+IP access-list number\n+IP access-list number (expanded range)\n+IP Access-list name\n+Filter incoming updates\n+Filter outgoing updates\n+no ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) tag <1-4294967295>vrf <0-65535>\n+show ip bgp flap-statistics cidr-only\n Show running system information\n+IP information\n BGP information\n-BGP view\n-View name\n-Address family\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-ip multicast rpf-lookup-mode (urib-only|mrib-only|mrib-then-urib|lower-distance|longer-prefix)\n+Display flap statistics of routes\n+Display only routes with non-natural netmasks\n+match ip address prefix-list WORD\n+Match values from routing table\n IP information\n-Multicast options\n-RPF lookup behavior\n-Lookup in unicast RIB only\n-Lookup in multicast RIB only\n-Try multicast RIB first, fall back to unicast RIB\n-Lookup both, use entry with lower distance\n-Lookup both, use entry with longer prefix\n-show version ospf6\n+Match address of route\n+Match entries of prefix-lists\n+IP prefix-list name\n+clear bgp view WORD (A.B.C.D|X:X::X:X) rsclient\n+Reset functions\n+BGP information\n+BGP view\n+view name\n+BGP neighbor IP address to clear\n+BGP IPv6 neighbor to clear\n+Soft reconfig for rsclient RIB\n+neighbor (A.B.C.D|X:X::X:X|WORD) distribute-list (<1-199>|<1300-2699>|WORD) (in|out)\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Filter updates to/from this neighbor\n+IP access-list number\n+IP access-list number (expanded range)\n+IP Access-list name\n+Filter incoming updates\n+Filter outgoing updates\n+show bgp view WORD ipv6 (unicast|multicast) rsclient summary\n+no max-metric router-lsa administrative\n+Negate a command or set its defaults\n+OSPF maximum / infinite-distance metric\n+Advertise own Router-LSA with infinite distance (stub router)\n+Administratively applied, for an indefinite period\n+debug ripng packet (recv|send)\n+Debugging functions (see also 'undebug')\n+RIPng configuration\n+Debug option set for ripng packet\n+Debug option set for receive packet\n+Debug option set for send packet\n+show ip bgp ipv4 (unicast|multicast) summary\n Show running system information\n-Displays ospf6d version\n-redistribute (kernel|connected|static|ospf6|isis|bgp|babel|nhrp) metric <0-16>\n-Redistribute\n-Kernel routes (not installed via the zebra RIB)\n-Connected routes (directly attached subnet or host)\n-Statically configured routes\n-Open Shortest Path First (IPv6) (OSPFv3)\n-Intermediate System to Intermediate System (IS-IS)\n-Border Gateway Protocol (BGP)\n-Babel routing protocol (Babel)\n-Next Hop Resolution Protocol (NHRP)\n-Metric value\n-no ip route A.B.C.D/M (reject|blackhole) tag <1-4294967295> <1-255>vrf <0-65535>\n+IP information\n+BGP information\n+Address family\n+Address Family modifier\n+Address Family modifier\n+Summary of BGP neighbor status\n+no log-adjacency-changes detail\n+Negate a command or set its defaults\n+Log changes in adjacency state\n+Log all state changes\n+no ip ospf retransmit-interval A.B.C.D\n+Negate a command or set its defaults\n+IP Information\n+OSPF interface commands\n+Time between retransmitting lost link state advertisements\n+Address of interface\n+no ip ospf message-digest-key <1-255> A.B.C.D\n+Negate a command or set its defaults\n+IP Information\n+OSPF interface commands\n+Message digest authentication password (key)\n+Address of interface\n+no debug ospf6 border-routers\n Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+Open Shortest Path First (OSPF) for IPv6\n+Debug border router\n+ip route A.B.C.D A.B.C.D (reject|blackhole)\n IP information\n Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n+IP destination prefix\n+IP destination prefix mask\n Emit an ICMP unreachable when matched\n Silently discard pkts when matched\n-Tag of this route\n-Tag value\n-Distance value for this route\n-Specify the VRF\n-The VRF ID\n-no ipv6 nd home-agent-preference\n+show ip igmp querier\n+Show running system information\n+IP information\n+IGMP information\n+IGMP querier information\n+MPLS-TE specific commands\n+Enable MPLS-TE functionality\n+neighbor A.B.C.D as <1-4294967295>\n+Configure remote ASBR information (Neighbor IP address and AS number)\n+Remote IP address in dot decimal A.B.C.D\n+Remote AS number\n+AS number in the range <1-4294967295>\n+no network A.B.C.D route-map WORD\n Negate a command or set its defaults\n-Interface IPv6 config commands\n-Neighbor discovery\n-Home Agent preference\n-lsp-refresh-interval <1-65235>\n-LSP refresh interval\n-LSP refresh interval in seconds\n-no isis metric <0-16777215> level-1\n+Specify a network to announce via BGP\n+Network number\n+Route-map to modify the attributes\n+Name of the route map\n+no version\n Negate a command or set its defaults\n-IS-IS commands\n-Set default metric for circuit\n-Default metric value\n-Specify metric for level-1 routing\n-no access-list (<100-199>|<2000-2699>) (deny|permit) ip A.B.C.D A.B.C.D host A.B.C.D\n+Set routing protocol version\n+no ipv6 prefix-list WORD seq <1-4294967295> (deny|permit) X:X::X:X/M ge <0-128>\n Negate a command or set its defaults\n-Add an access list entry\n-IP extended access list\n-IP extended access list (expanded range)\n+IPv6 information\n+Build a prefix list\n+Name of a prefix list\n+sequence number of an entry\n+Sequence number\n Specify packets to reject\n Specify packets to forward\n-Any Internet Protocol\n-Source address\n-Source wildcard bits\n-A single destination host\n-Destination address\n-clear ip bgp external soft out\n-Reset functions\n-IP information\n-BGP information\n-Clear all external peers\n-Soft reconfig inbound and outbound updates\n-Resend all outbound updates\n-undebug bgp fsm\n-Disable debugging functions (see also 'debug')\n-BGP information\n-Finite State Machine\n-no match ipv6 address prefix-list WORD\n+IPv6 prefix /, e.g., 3ffe::/16\n+Minimum prefix length to be matched\n+Minimum prefix length\n+no set as-path prepend\n Negate a command or set its defaults\n-Match values\n-IPv6 information\n-Match address of route\n-Match entries of prefix-lists\n-IPv6 prefix-list name\n-no ipv6 address X:X::X:X/M\n+Set values in destination routing protocol\n+Transform BGP AS_PATH attribute\n+Prepend to the as-path\n+no ipv6 access-list WORD\n Negate a command or set its defaults\n-Interface IPv6 config commands\n-Set the IP address of an interface\n-IPv6 address (e.g. 3ffe:506::1/48)\n-isis password (md5|clear) WORD\n-IS-IS commands\n-Configure the authentication password for a circuit\n-HMAC-MD5 authentication\n-Cleartext password\n-Circuit password\n-pce flag BITPATTERN\n-PCE Router Information specific commands\n-Capabilities of the PCE for path computation\n-32-bit Hexadecimal value\n-ipv6 nd prefix X:X::X:X/M (<0-4294967295>|infinite) (<0-4294967295>|infinite)\n-Interface IPv6 config commands\n-Neighbor discovery\n-Prefix information\n-IPv6 prefix\n-Valid lifetime in seconds\n-Infinite valid lifetime\n-Preferred lifetime in seconds\n-Infinite preferred lifetime\n-show ip ospf database (asbr-summary|external|network|router|summary|nssa-external|opaque-link|opaque-area|opaque-as) adv-router A.B.C.D\n+IPv6 information\n+Add an access list entry\n+IPv6 zebra access-list\n+show ip bgp prefix-list WORD\n Show running system information\n IP information\n+BGP information\n+Display routes conforming to the prefix-list\n+IP prefix-list name\n+debug bgp fsm\n+Debugging functions (see also 'undebug')\n+BGP information\n+BGP Finite State Machine\n+debug ospf te\n+Debugging functions (see also 'undebug')\n OSPF information\n-Database summary\n-ASBR summary link states\n-External link states\n-Network link states\n-Router link states\n-Network summary link states\n-NSSA external link state\n-Link local Opaque-LSA\n-Link area Opaque-LSA\n-Link AS Opaque-LSA\n-Advertising Router link states\n-Advertising Router (as an IP address)\n-no ip mroute INTERFACE A.B.C.D A.B.C.D\n+OSPF-TE information\n+no ip pim ssm\n Negate a command or set its defaults\n IP information\n-Add multicast route\n-Outgoing interface name\n-Group Address\n-Source Address\n-clear ip bgp <1-4294967295> ipv4 (unicast|multicast) in\n+PIM information\n+Enable PIM SSM operation\n+no ip ospf hello-interval <1-65535> A.B.C.D\n+Negate a command or set its defaults\n+IP Information\n+OSPF interface commands\n+Time between HELLO packets\n+Address of interface\n+no bgp router-id A.B.C.D\n+Negate a command or set its defaults\n+BGP information\n+Override configured router identifier\n+Manually configured router identifier\n+ip route A.B.C.D/M (reject|blackhole) <1-255>\n+IP information\n+Establish static routes\n+IP destination prefix (e.g. 10.0.0.0/8)\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Distance value for this route\n+show isis topology\n+Show running system information\n+IS-IS information\n+IS-IS paths to Intermediate Systems\n+clear ip bgp peer-group WORD ipv4 (unicast|multicast) soft out\n Reset functions\n IP information\n BGP information\n-Clear peers with the AS number\n+Clear all members of peer-group\n+BGP peer-group name\n Address family\n Address Family modifier\n Address Family modifier\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-no bgp log-neighbor-changes\n-Negate a command or set its defaults\n-BGP specific commands\n-Log neighbor up/down and reset reason\n-no ospf cost A.B.C.D\n-Negate a command or set its defaults\n-OSPF interface commands\n-Interface cost\n-Address of interface\n-show ipv6 mbgp summary\n+Soft reconfig inbound and outbound updates\n+Resend all outbound updates\n+show ipv6 ospf6 database adv-router A.B.C.D linkstate-id A.B.C.D\n Show running system information\n IPv6 information\n-MBGP information\n-Summary of BGP neighbor status\n-ipv6 prefix-list WORD (deny|permit) (X:X::X:X/M|any)\n+Open Shortest Path First (OSPF) for IPv6\n+Display Link state database\n+Search by Advertising Router\n+Specify Advertising Router as IPv4 address notation\n+Search by Link state ID\n+Specify Link state ID as IPv4 address notation\n+no ipv6 prefix-list WORD seq <1-4294967295> (deny|permit) X:X::X:X/M ge <0-128> le <0-128>\n+Negate a command or set its defaults\n IPv6 information\n Build a prefix list\n Name of a prefix list\n+sequence number of an entry\n+Sequence number\n Specify packets to reject\n Specify packets to forward\n IPv6 prefix /, e.g., 3ffe::/16\n-Any prefix match. Same as \"::0/0 le 128\"\n-show bgp ipv6 (encap|multicast|unicast|vpn) community-list (<1-500>|WORD)\n-Show running system information\n+Minimum prefix length to be matched\n+Minimum prefix length\n+Maximum prefix length to be matched\n+Maximum prefix length\n+lsp-mtu <128-4352>\n+Configure the maximum size of generated LSPs\n+Maximum size of generated LSPs\n+no timers throttle spf\n+Negate a command or set its defaults\n+Adjust routing timers\n+Throttling adaptive timer\n+OSPF6 SPF timers\n+no access-list (<100-199>|<2000-2699>) (deny|permit) ip host A.B.C.D any\n+Negate a command or set its defaults\n+Add an access list entry\n+IP extended access list\n+IP extended access list (expanded range)\n+Specify packets to reject\n+Specify packets to forward\n+Any Internet Protocol\n+A single source host\n+Source address\n+Any destination host\n+clear bgp (A.B.C.D|X:X::X:X) soft out\n+Reset functions\n+BGP information\n+BGP neighbor address to clear\n+BGP IPv6 neighbor to clear\n+Soft reconfig inbound and outbound updates\n+Resend all outbound updates\n+clear bgp (A.B.C.D|X:X::X:X) soft\n+Reset functions\n+BGP information\n+BGP neighbor address to clear\n+BGP IPv6 neighbor to clear\n+Soft reconfig inbound and outbound updates\n+clear ip bgp A.B.C.D vpnv4 unicast in\n+Reset functions\n+IP information\n BGP information\n+BGP neighbor address to clear\n Address family\n-Address family modifier\n-Address family modifier\n-Address family modifier\n-Address family modifier\n-Display routes matching the community-list\n-community-list number\n-community-list name\n-show bgp ipv4 vpn\n-undebug pim packet-dump send\n-Disable debugging functions (see also 'debug')\n-PIM protocol activity\n-PIM packet dump\n-Dump sent packets\n-show ip bgp vpnv4 all summary\n+Address Family Modifier\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+show ip bgp ipv4 (unicast|multicast) rsclient summary\n Show running system information\n IP information\n BGP information\n-Display VPNv4 NLRI specific information\n-Display information about all VPNv4 NLRIs\n-Summary of BGP neighbor status\n-ipv6 nd adv-interval-option\n-Interface IPv6 config commands\n-Neighbor discovery\n-Advertisement Interval Option\n-show bgp ipv4 (unicast|multicast) large-community (AA:BB:CC)\n+Address family\n+Address Family modifier\n+Address Family modifier\n+Information about Route Server Clients\n+Summary of all Route Server Clients\n+show bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n Show running system information\n BGP information\n+Display routes matching the communities\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+Exact match of the communities\n+clear ip bgp <1-4294967295> vpnv4 unicast soft out\n+Reset functions\n+IP information\n+BGP information\n+Clear peers with the AS number\n Address family\n Address Family modifier\n-Address Family modifier\n-Display routes matching the large-communities\n-large-community number\n-ipv6 ospf6 advertise prefix-list WORD\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Advertising options\n-Filter prefix using prefix-list\n-Prefix list name\n-debug pim packets\n-Debugging functions (see also 'undebug')\n-PIM protocol activity\n-PIM protocol packets\n-no debug zebra fpm\n-Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-Zebra configuration\n-Debug zebra FPM events\n-show ipv6 ospf6 border-routers\n+Soft reconfig inbound and outbound updates\n+Resend all outbound updates\n+show ipv6 ospf6 database adv-router A.B.C.D\n Show running system information\n-IPv6 Information\n+IPv6 information\n Open Shortest Path First (OSPF) for IPv6\n-Display routing table for ABR and ASBR\n-show bgp view WORD neighbors (A.B.C.D|X:X::X:X) received prefix-filter\n+Display Link state database\n+Search by Advertising Router\n+Specify Advertising Router as IPv4 address notation\n+show ipv6 bgp neighbors (A.B.C.D|X:X::X:X) advertised-routes\n Show running system information\n+IPv6 information\n BGP information\n-BGP view\n-View name\n Detailed information on TCP and BGP neighbor connections\n Neighbor to display information about\n Neighbor to display information about\n-Display information received from a BGP neighbor\n-Display the prefixlist filter\n-show bgp ipv4 rsclient (A.B.C.D|X:X::X:X)\n+Display the routes advertised to a BGP neighbor\n+ip address A.B.C.D/M\n+Interface Internet Protocol config commands\n+Set the IP address of an interface\n+IP address (e.g. 10.0.0.1/8)\n+no ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) (reject|blackhole) tag <1-4294967295> <1-255>\n+Negate a command or set its defaults\n+IP information\n+Establish static routes\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Set tag for this route\n+Tag value\n+Distance value for this prefix\n+show ipv6 ospf6 route X:X::X:X/M longer\n Show running system information\n-BGP information\n-Address Family\n-Information about Route Server Client\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-(area-password|domain-password) md5 WORD authenticate snp (send-only|validate)\n-Configure the authentication password for an area\n-Set the authentication password for a routing domain\n-Authentication type\n-Level-wide password\n-Authentication\n-SNP PDUs\n-Send but do not check PDUs on receiving\n-Send and check PDUs on receiving\n-ip ospf message-digest-key <1-255> md5 KEY A.B.C.D\n-IP Information\n-OSPF interface commands\n-Message digest authentication password (key)\n-Use MD5 algorithm\n-The OSPF password (key)Address of interface\n-show bgp large-community-list (<1-500>|WORD)\n+IPv6 Information\n+Open Shortest Path First (OSPF) for IPv6\n+Routing Table\n+Specify IPv6 prefix\n+Display routes longer than the specified route\n+no debug pim packets (hello|joins)\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+PIM protocol activity\n+PIM protocol packets\n+PIM Hello protocol packets\n+PIM Join/Prune protocol packets\n+show ip route summary prefix vrf <0-65535>\n Show running system information\n-BGP information\n-Display routes matching the large-community-list\n-large-community-list number\n-large-community-list name\n-bgp graceful-restart restart-time <1-3600>\n-BGP specific commands\n-Graceful restart capability parameters\n-Set the time to wait to delete stale routes before a BGP open message is received\n-Delay value (seconds)\n-redistribute (kernel|connected|static|rip|ospf|isis|pim|babel|nhrp) route-map WORD metric <0-4294967295>\n+IP information\n+IP routing table\n+Summary of all routes\n+Prefix routes\n+Specify the VRF\n+The VRF ID\n+no redistribute (kernel|connected|static|ripng|ospf6|isis|babel|nhrp) route-map WORD metric <0-4294967295>\n+Negate a command or set its defaults\n Redistribute information from another routing protocol\n Kernel routes (not installed via the zebra RIB)\n Connected routes (directly attached subnet or host)\n Statically configured routes\n-Routing Information Protocol (RIP)\n-Open Shortest Path First (OSPFv2)\n+Routing Information Protocol next-generation (IPv6) (RIPng)\n+Open Shortest Path First (IPv6) (OSPFv3)\n Intermediate System to Intermediate System (IS-IS)\n-Protocol Independent Multicast (PIM)\n Babel routing protocol (Babel)\n Next Hop Resolution Protocol (NHRP)\n Route map reference\n Pointer to route-map entries\n Metric for redistributed routes\n Default metric\n-no ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole) <1-255>\n+show ipv6 route X:X::X:X vrf <0-65535>\n+Show running system information\n+IP information\n+IPv6 routing table\n+IPv6 Address\n+Specify the VRF\n+The VRF ID\n+match community (<1-99>|<100-500>|WORD)\n+Match values from routing table\n+Match BGP community list\n+Community-list number (standard)\n+Community-list number (expanded)\n+Community-list name\n+area A.B.C.D export-list NAME\n+OSPFv6 area parameters\n+OSPFv6 area ID in IP address format\n+Set the filter for networks announced to other areas\n+Name of the acess-list\n+no ip protocol PROTO\n+Negate a command or set its defaults\n+Remove route map from PROTO\n+Protocol name\n+no ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole) tag <1-4294967295>\n Negate a command or set its defaults\n IP information\n Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n+IP destination prefix (e.g. 10.0.0.0/8)\n IP gateway address\n IP gateway interface name\n Emit an ICMP unreachable when matched\n Silently discard pkts when matched\n+Tag of this route\n+Tag value\n+show bgp ipv4 vpn tags\n+Show running system information\n+BGP information\n+Address Family\n+Display VPN NLRI specific information\n+Display BGP tags for prefixes\n+ip route A.B.C.D/M (reject|blackhole) <1-255> vrf <0-65535>\n+IP information\n+Establish static routes\n+IP destination prefix (e.g. 10.0.0.0/8)\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n Distance value for this route\n-clear ip bgp * vpnv4 unicast soft\n-Reset functions\n+Specify the VRF\n+The VRF ID\n+show ip route summary prefix vrf all\n+Show running system information\n IP information\n+IP routing table\n+Summary of all routes\n+Prefix routes\n+Specify the VRF\n+All VRFs\n+no network A.B.C.D/M route-map WORD\n+Negate a command or set its defaults\n+Specify a network to announce via BGP\n+IP prefix /, e.g., 35.0.0.0/8\n+Route-map to modify the attributes\n+Name of the route map\n+clear bgp ipv6 <1-4294967295> in prefix-filter\n+Reset functions\n BGP information\n-Clear all peers\n Address family\n-Address Family Modifier\n-Soft reconfig inbound and outbound updates\n-no redistribute (kernel|connected|static|rip|ospf|isis|pim|babel|nhrp) metric <0-4294967295> route-map WORD\n-Negate a command or set its defaults\n-Redistribute information from another routing protocol\n-Kernel routes (not installed via the zebra RIB)\n-Connected routes (directly attached subnet or host)\n-Statically configured routes\n-Routing Information Protocol (RIP)\n-Open Shortest Path First (OSPFv2)\n-Intermediate System to Intermediate System (IS-IS)\n-Protocol Independent Multicast (PIM)\n-Babel routing protocol (Babel)\n-Next Hop Resolution Protocol (NHRP)\n-Metric for redistributed routes\n-Default metric\n-Route map reference\n-Pointer to route-map entries\n-no redistribute (kernel|connected|static|rip|isis|bgp|pim|babel|nhrp)\n-Negate a command or set its defaults\n-Redistribute information from another routing protocol\n-Kernel routes (not installed via the zebra RIB)\n-Connected routes (directly attached subnet or host)\n-Statically configured routes\n-Routing Information Protocol (RIP)\n-Intermediate System to Intermediate System (IS-IS)\n-Border Gateway Protocol (BGP)\n-Protocol Independent Multicast (PIM)\n-Babel routing protocol (Babel)\n-Next Hop Resolution Protocol (NHRP)\n-show ipv6 ospf6 database * A.B.C.D A.B.C.D (detail|dump|internal)\n+Clear peers with the AS number\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+Push out prefix-list ORF and do inbound soft reconfig\n+set local-preference <0-4294967295>\n+Set values in destination routing protocol\n+BGP local preference path attribute\n+Preference value\n+show ipv6 route X:X::X:X\n Show running system information\n-IPv6 information\n-Open Shortest Path First (OSPF) for IPv6\n-Display Link state database\n-Any Link state Type\n-Specify Link state ID as IPv4 address notation\n-Specify Advertising Router as IPv4 address notation\n-Display details of LSAs\n-Dump LSAs\n-Display LSA's internal information\n-debug isis spf-triggers\n-Debugging functions (see also 'undebug')\n-IS-IS information\n-IS-IS SPF triggering events\n-show bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export)\n+IP information\n+IPv6 routing table\n+IPv6 Address\n+show bgp ipv4 encap\n+show bgp ipv4 vpn rd ASN:nn_or_IP-address:nn\n+clear bgp ipv6 view WORD * rsclient\n+Reset functions\n+BGP information\n+Address family\n+BGP view\n+view name\n+Clear all peers\n+Soft reconfig for rsclient RIB\n+show ip bgp ipv4 (unicast|multicast)\n Show running system information\n+IP information\n BGP information\n Address family\n Address Family modifier\n Address Family modifier\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-undebug pim events\n-Disable debugging functions (see also 'debug')\n-PIM protocol activity\n-PIM protocol events\n-show bgp large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n+show bgp ipv4 large-community (AA:BB:CC) (AA:BB:CC) (AA:BB:CC)\n Show running system information\n BGP information\n+IP information\n Display routes matching the large-communities\n large-community number\n large-community number\n large-community number\n-large-community number\n-show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) A.B.C.D A.B.C.D (dump|internal)\n+show ipv6 ospf6 interface\n Show running system information\n-IPv6 information\n+IPv6 Information\n Open Shortest Path First (OSPF) for IPv6\n-Display Link state database\n-Display Router LSAs\n+Interface information\n+clear ip bgp dampening A.B.C.D\n+Reset functions\n+IP information\n+BGP information\n+Clear route flap dampening information\n+Network to clear damping information\n+neighbor (A.B.C.D|X:X::X:X|WORD) shutdown\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Administratively shut down this neighbor\n+clear ipv6 prefix-list\n+Reset functions\n+IPv6 information\n+Build a prefix list\n+debug mroute\n+Debugging functions (see also 'undebug')\n+PIM interaction with kernel MFC cache\n+Specify a network to announce via BGP\n+IP prefix /, e.g., 35.0.0.0/8\n+Specify Route Distinguisher\n+ENCAP Route Distinguisher\n+tag value\n+show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) self-originated linkstate-id A.B.C.D\n+Show running system information\n+IPv6 information\n+Open Shortest Path First (OSPF) for IPv6\n+Display Link state database\n+Display Router LSAs\n Display Network LSAs\n Display Inter-Area-Prefix LSAs\n Display Inter-Area-Router LSAs\n Display As-External LSAs\n Display Group-Membership LSAs\n Display Type-7 LSAs\n Display Link LSAs\n Display Intra-Area-Prefix LSAs\n+Display Self-originated LSAs\n+Search by Link state ID\n Specify Link state ID as IPv4 address notation\n-Specify Advertising Router as IPv4 address notation\n-Dump LSAs\n-Display LSA's internal information\n-ospf authentication-key AUTH_KEY\n-OSPF interface commands\n-Authentication password (key)\n-The OSPF password (key)\n-show ipv6 mbgp large-community (AA:BB:CC) (AA:BB:CC)\n+no is-type (level-1|level-1-2|level-2-only)\n+Negate a command or set its defaults\n+IS Level for this routing process (OSI only)\n+Act as a station router only\n+Act as both a station router and an area router\n+Act as an area router only\n+show bgp ipv4 prefix-list WORD\n Show running system information\n-IPv6 information\n-MBGP information\n+BGP information\n+IP information\n+Display routes conforming to the prefix-list\n+IP prefix-list name\n+show ip pim assert-winner-metric\n+Show running system information\n+IP information\n+PIM information\n+PIM interface assert winner metric\n+no ip community-list <1-99>\n+Negate a command or set its defaults\n+IP information\n+Add a community list entry\n+Community list number (standard)\n+show ipv6 route X:X::X:X/M longer-prefixes\n+Show running system information\n+IP information\n+IPv6 routing table\n+IPv6 prefix\n+Show route matching the specified Network/Mask pair only\n+ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole) <1-255>\n+IP information\n+Establish static routes\n+IP destination prefix\n+IP destination prefix mask\n+IP gateway address\n+IP gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Distance value for this route\n+ip large-community-list <1-99> (deny|permit)\n+IP information\n+Add a large community list entry\n+Large Community list number (standard)\n+Specify large community to reject\n+Specify large community to accept\n+show bgp large-community (AA:BB:CC) (AA:BB:CC)\n+Show running system information\n+BGP information\n Display routes matching the large-communities\n large-community number\n large-community number\n-show ipv6 ospf6 route (intra-area|inter-area|external-1|external-2) detail\n-Show running system information\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Routing Table\n-Display Intra-Area routes\n-Display Inter-Area routes\n-Display Type-1 External routes\n-Display Type-2 External routes\n-Detailed information\n-no isis priority <0-127>\n+no debug rip packet\n Negate a command or set its defaults\n-IS-IS commands\n-Set priority for Designated Router election\n-Priority value\n-no set comm-list\n+Debugging functions (see also 'undebug')\n+RIP information\n+RIP packet\n+no isis hello-interval\n Negate a command or set its defaults\n-Set values in destination routing protocol\n-set BGP community list (for deletion)\n-show bgp ipv4 community-list (<1-500>|WORD)\n+IS-IS commands\n+Set Hello interval\n+show ip as-path-access-list WORD\n Show running system information\n-BGP information\n IP information\n-Display routes matching the community-list\n-community-list number\n-community-list name\n-neighbor (A.B.C.D|X:X::X:X|WORD) advertisement-interval <0-600>\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Minimum interval between sending BGP routing updates\n-time in seconds\n-no ipv6 nd prefix IPV6PREFIX\n-Negate a command or set its defaults\n-Interface IPv6 config commands\n-Neighbor discovery\n-Prefix information\n-IPv6 prefix\n-no debug ospf6 spf database\n+List AS path access lists\n+AS path access list name\n+no network X:X::X:X/M route-map WORD\n Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n+Specify a network to announce via BGP\n+IPv6 prefix /\n+Route-map to modify the attributes\n+Name of the route map\n+ipv6 ospf6 retransmit-interval <1-65535>\n+IPv6 Information\n Open Shortest Path First (OSPF) for IPv6\n-Debug SPF Calculation\n-Quit Logging number of LSAs at SPF Calculation time\n-show ip igmp sources\n+Time between retransmitting lost link state advertisements\n+<1-65535> Seconds\n+show ipv6 bgp large-community (AA:BB:CC) (AA:BB:CC)\n Show running system information\n-IP information\n-IGMP information\n-IGMP sources information\n-no debug pim packets (hello|joins)\n+IPv6 information\n+BGP information\n+Display routes matching the large-communities\n+large-community number\n+large-community number\n+no ip prefix-list WORD (deny|permit) A.B.C.D/M ge <0-32> le <0-32>\n Negate a command or set its defaults\n-Debugging functions (see also 'undebug')\n-PIM protocol activity\n-PIM protocol packets\n-PIM Hello protocol packets\n-PIM Join/Prune protocol packets\n-clear ip bgp * soft in\n+IP information\n+Build a prefix list\n+Name of a prefix list\n+Specify packets to reject\n+Specify packets to forward\n+IP prefix /, e.g., 35.0.0.0/8\n+Minimum prefix length to be matched\n+Minimum prefix length\n+Maximum prefix length to be matched\n+Maximum prefix length\n+network IF_OR_ADDR\n+RIPng enable on specified interface or network.\n+Interface or address\n+show ipv6 prefix-list WORD seq <1-4294967295>\n+Show running system information\n+IPv6 information\n+Build a prefix list\n+Name of a prefix list\n+sequence number of an entry\n+Sequence number\n+clear ip bgp A.B.C.D vpnv4 unicast soft in\n Reset functions\n IP information\n BGP information\n-Clear all peers\n+BGP neighbor address to clear\n+Address family\n+Address Family Modifier\n Soft reconfig inbound and outbound updates\n Send route-refresh unless using 'soft-reconfiguration inbound'\n-ip ospf authentication-key AUTH_KEY A.B.C.D\n-IP Information\n-OSPF interface commands\n-Authentication password (key)\n-The OSPF password (key)\n-Address of interface\n-no bgp dampening <1-45> <1-20000> <1-20000> <1-255>\n-Negate a command or set its defaults\n-BGP Specific commands\n-Enable route-flap dampening\n-Half-life time for the penalty\n-Value to start reusing a route\n-Value to start suppressing a route\n-Maximum duration to suppress a stable route\n-clear bgp external in prefix-filter\n+bgp bestpath med confed missing-as-worst\n+clear ip bgp view WORD *\n Reset functions\n-BGP information\n-Clear all external peers\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-Push out prefix-list ORF and do inbound soft reconfig\n-no match ip address prefix-list WORD\n-Negate a command or set its defaults\n-Match values from routing table\n IP information\n-Match address of route\n-Match entries of prefix-lists\n-IP prefix-list name\n-neighbor (A.B.C.D|X:X::X:X|WORD) distribute-list (<1-199>|<1300-2699>|WORD) (in|out)\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Filter updates to/from this neighbor\n-IP access-list number\n-IP access-list number (expanded range)\n-IP Access-list name\n-Filter incoming updates\n-Filter outgoing updates\n-show ipv6 ospf6 route\n-Show running system information\n-IPv6 Information\n-Open Shortest Path First (OSPF) for IPv6\n-Routing Table\n-show bgp view WORD summary\n-Show running system information\n BGP information\n BGP view\n-View name\n-Summary of BGP neighbor status\n-neighbor (A.B.C.D|X:X::X:X|WORD) route-server-client\n+view name\n+Clear all peers\n+no debug zebra rib queue\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+Zebra configuration\n+Debug zebra RIB\n+Debug RIB queueing\n+offset-list WORD (in|out) <0-16> IFNAME\n+Modify RIPng metric\n+Access-list name\n+For incoming updates\n+For outgoing updates\n+Metric value\n+Interface to match\n+neighbor (A.B.C.D|X:X::X:X|WORD) description .LINE\n Specify neighbor router\n Neighbor address\n Neighbor IPv6 address\n Neighbor tag\n-Configure a neighbor as Route Server client\n-debug rip zebra\n-Debugging functions (see also 'undebug')\n-RIP information\n-RIP and ZEBRA communication\n-clear ip bgp * soft\n-Reset functions\n+Neighbor specific description\n+Up to 80 characters describing this neighbor\n+no debug pim packets\n+no distance bgp\n+Negate a command or set its defaults\n+Define an administrative distance\n+BGP distance\n+Link metric for MPLS-TE purpose\n+Metric value in decimal\n+no ip route A.B.C.D/M (reject|blackhole) tag <1-4294967295>vrf <0-65535>\n+Negate a command or set its defaults\n IP information\n-BGP information\n-Clear all peers\n-Soft reconfig inbound and outbound updates\n-no match ipv6 address prefix-list\n+Establish static routes\n+IP destination prefix (e.g. 10.0.0.0/8)\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Tag of this route\n+Tag value\n+Specify the VRF\n+The VRF ID\n+no area A.B.C.D import-list NAME\n+OSPFv6 area parameters\n+OSPFv6 area ID in IP address format\n+Unset the filter for networks announced to other areas\n+NAme of the access-list\n+no set ipv6 next-hop local\n Negate a command or set its defaults\n-Match values from routing table\n+Set values in destination routing protocol\n IPv6 information\n-Match address of route\n-Match entries of prefix-lists\n-debug nhrp (all|common|event|interface|kernel|route|vici)\n-Enable debug messages for specific or all parts.\n-NHRP information\n-All messages\n-Common messages (default)\n-Event manager messages\n-Interface messages\n-Kernel messages\n-Route messages\n-VICI messages\n-show ip bgp flap-statistics regexp .LINE\n+IPv6 next-hop address\n+IPv6 local address\n+show ip bgp view WORD ipv4 (unicast|multicast) rsclient summary\n Show running system information\n IP information\n BGP information\n-Display flap statistics of routes\n-Display routes matching the AS path regular expression\n-A regular-expression to match the BGP AS paths\n-no redistribute (kernel|connected|static|rip|ospf|isis|pim|babel|nhrp)\n-Negate a command or set its defaults\n-Redistribute information from another routing protocol\n-Kernel routes (not installed via the zebra RIB)\n-Connected routes (directly attached subnet or host)\n-Statically configured routes\n-Routing Information Protocol (RIP)\n-Open Shortest Path First (OSPFv2)\n-Intermediate System to Intermediate System (IS-IS)\n-Protocol Independent Multicast (PIM)\n-Babel routing protocol (Babel)\n-Next Hop Resolution Protocol (NHRP)\n-show bgp ipv6 (encap|multicast|unicast|vpn) flap-statistics X:X::X:X/M\n-Show running system information\n-BGP information\n+BGP view\n+View name\n Address family\n Address Family modifier\n Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Display flap statistics of routes\n-IP prefix /, e.g., 35.0.0.0/8\n-no network (A.B.C.D/M|WORD)\n-Negate a command or set its defaults\n-Enable routing on an IP network\n-IP prefix /, e.g., 35.0.0.0/8\n-Interface name\n-show ipv6 mbgp large-community\n-Show running system information\n-IPv6 information\n-MBGP information\n-Display routes matching the large-communities\n-Negate a command or set its defaults\n-Administrative distance\n-Distance value\n-isis csnp-interval <1-600> level-2\n-IS-IS commands\n-Set CSNP interval in seconds\n-CSNP interval value\n-Specify interval for level-2 CSNPs\n-no match ip route-source (<1-199>|<1300-2699>|WORD)\n+Information about Route Server Clients\n+Summary of all Route Server Clients\n+no debug ospf6 route (table|intra-area|inter-area|memory)\n Negate a command or set its defaults\n-Match values from routing table\n-IP information\n-Match advertising source address of route\n-IP access-list number\n-IP access-list number (expanded range)\n-IP standard access-list name\n-area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (authentication|) (message-digest|null)\n+Debugging functions (see also 'undebug')\n+Open Shortest Path First (OSPF) for IPv6\n+Debug route table calculation\n+Debug intra-area route calculation\n+Debug route memory use\n+area (A.B.C.D|<0-4294967295>) stub\n OSPF area parameters\n OSPF area ID in IP address format\n OSPF area ID as a decimal value\n-Configure a virtual link\n-Router ID of the remote ABR\n-Enable authentication on this virtual link\n-dummy string \n-Use null authentication\n-Use message-digest authentication\n-no lsp-gen-interval\n-Negate a command or set its defaults\n-Minimum interval between regenerating same LSP\n-no ip community-list expanded WORD (deny|permit) .LINE\n+Configure OSPF area as stub\n+neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged next-hop as-path med\n+no ipv6 route X:X::X:X/M X:X::X:X INTERFACE (reject|blackhole) vrf <0-65535>\n Negate a command or set its defaults\n IP information\n-Add a community list entry\n-Specify an expanded community-list\n-Community list name\n-Specify community to reject\n-Specify community to accept\n-An ordered list as a regular-expression\n-show ip bgp ipv4 (unicast|multicast) A.B.C.D/M\n+Establish static routes\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Specify the VRF\n+The VRF ID\n+no neighbor WORD peer-group\n+Negate a command or set its defaults\n+Specify neighbor router\n+Neighbor tag\n+Configure peer-group\n+show ip bgp rsclient (A.B.C.D|X:X::X:X) A.B.C.D\n Show running system information\n IP information\n BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-IP prefix /, e.g., 35.0.0.0/8\n-show ipv6 ospf6 database * A.B.C.D\n+Information about Route Server Client\n+Neighbor address\n+IPv6 address\n+Network in the BGP routing table to display\n+Define an administrative distance\n+Administrative distance\n+IP source prefix\n+Access list name\n+no set as-path exclude\n+Negate a command or set its defaults\n+Set values in destination routing protocol\n+Transform BGP AS_PATH attribute\n+Exclude from the as-path\n+show bgp view WORD ipv6 neighbors (A.B.C.D|X:X::X:X)\n Show running system information\n-IPv6 information\n-Open Shortest Path First (OSPF) for IPv6\n-Display Link state database\n-Any Link state Type\n-Specify Link state ID as IPv4 address notation\n-show bgp rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M\n+BGP information\n+BGP view\n+View name\n+Address family\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+show bgp rsclient (A.B.C.D|X:X::X:X) X:X::X:X\n Show running system information\n BGP information\n Information about Route Server Client\n Neighbor address\n IPv6 address\n-IPv6 prefix /, e.g., 3ffe::/16\n-debug ospf nsm (status|events|timers)\n+Network in the BGP routing table to display\n+clear bgp peer-group WORD\n+Reset functions\n+BGP information\n+Clear all members of peer-group\n+BGP peer-group name\n+show ip route summary prefix\n+Show running system information\n+IP information\n+IP routing table\n+Summary of all routes\n+Prefix routes\n+debug zebra nht\n Debugging functions (see also 'undebug')\n-OSPF information\n-OSPF Neighbor State Machine\n-NSM Status Information\n-NSM Event Information\n-NSM Timer Information\n-bgp bestpath compare-routerid\n-BGP specific commands\n-Change the default bestpath selection\n-Compare router-id for identical EBGP paths\n-no neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged next-hop as-path med\n+Zebra configuration\n+Debug option set for zebra next hop tracking\n+clear bgp ipv6 peer-group WORD soft out\n+Reset functions\n+BGP information\n+Address family\n+Clear all members of peer-group\n+BGP peer-group name\n+Soft reconfig inbound and outbound updates\n+Resend all outbound updates\n+no set comm-list\n+Negate a command or set its defaults\n+Set values in destination routing protocol\n+set BGP community list (for deletion)\n+no passive-interface IFNAME\n+Negate a command or set its defaults\n+Suppress routing updates on an interface\n+Interface name\n+show bgp view WORD\n+Show running system information\n+BGP information\n+BGP view\n+View name\n+no ipv6 ospf6 ifmtu\n+Negate a command or set its defaults\n+IPv6 Information\n+Open Shortest Path First (OSPF) for IPv6\n+Interface MTU\n+no neighbor (A.B.C.D|X:X::X:X|WORD) remove-private-AS\n Negate a command or set its defaults\n Specify neighbor router\n Neighbor address\n Neighbor IPv6 address\n Neighbor tag\n-BGP attribute is propagated unchanged to this neighbor\n-Nexthop attribute\n-As-path attribute\n-Med attribute\n-no ip prefix-list WORD seq <1-4294967295> (deny|permit) A.B.C.D/M ge <0-32> le <0-32>\n+Remove private AS number from outbound updates\n+no ipv6 nd managed-config-flag\n Negate a command or set its defaults\n+Interface IPv6 config commands\n+Neighbor discovery\n+Managed address configuration flag\n+set vpnv4 next-hop A.B.C.D\n+Set values in destination routing protocol\n+VPNv4 information\n+VPNv4 next-hop address\n+IP address of next hop\n+clear ip bgp external ipv4 (unicast|multicast) out\n+Reset functions\n IP information\n-Build a prefix list\n-Name of a prefix list\n-sequence number of an entry\n-Sequence number\n-Specify packets to reject\n-Specify packets to forward\n-IP prefix /, e.g., 35.0.0.0/8\n-Minimum prefix length to be matched\n-Minimum prefix length\n-Maximum prefix length to be matched\n-Maximum prefix length\n-tunnel protection vici profile PROFILE {fallback-profile FALLBACK}\n-NHRP/GRE integration\n-IPsec protection\n-VICI (StrongSwan)\n-IPsec profile\n-IPsec profile name\n-Fallback IPsec profile\n-Fallback IPsec profile name\n-send-lifetime HH:MM:SS MONTH <1-31> <1993-2035> duration <1-2147483646>\n-Set send lifetime of the key\n-Time to start\n-Month of the year to start\n-Day of th month to start\n-Year to start\n-Duration of the key\n-Duration seconds\n-show bgp view WORD (ipv4|ipv6) (unicast|multicast) large-community\n-Show running system information\n BGP information\n-BGP view\n-View name\n-Address family\n+Clear all external peers\n Address family\n Address Family modifier\n Address Family modifier\n-Display routes matching the large-communities\n-show ip bgp dampening dampened-paths\n-Show running system information\n+Resend all outbound updates\n+no match tag <1-4294967295>\n+Negate a command or set its defaults\n+Match values from routing table\n+Match tag of route\n+Metric value\n+Default route information\n+Distribute default route\n+no ip rip split-horizon poisoned-reverse\n+Negate a command or set its defaults\n+IP information\n+Routing Information Protocol\n+Perform split horizon\n+With poisoned-reverse\n+no bgp bestpath as-path ignore\n+Negate a command or set its defaults\n+BGP specific commands\n+Change the default bestpath selection\n+AS-path attribute\n+Ignore as-path length in selecting a route\n+no ip ospf mtu-ignore A.B.C.D\n+IP Information\n+OSPF interface commands\n+Disable mtu mismatch detection\n+Address of interface\n+clear ip bgp A.B.C.D soft\n+Reset functions\n IP information\n BGP information\n+BGP neighbor address to clear\n+Soft reconfig inbound and outbound updates\n+neighbor (A.B.C.D|X:X::X:X|WORD) timers <0-65535> <0-65535>\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+BGP per neighbor timers\n+Keepalive interval\n+Holdtime\n+show bgp ipv6 (encap|multicast|unicast|vpn) dampening dampened-paths\n+Show running system information\n+BGP information\n+IPv6 information\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n Display detailed information about dampening\n Display paths suppressed due to dampening\n-show bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n+show bgp ipv6 (unicast|multicast) rsclient (A.B.C.D|X:X::X:X) X:X::X:X\n+show ip bgp ipv4 (unicast|multicast) A.B.C.D/M (bestpath|multipath)\n Show running system information\n+IP information\n BGP information\n Address family\n Address Family modifier\n Address Family modifier\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-Exact match of the communities\n-no area A.B.C.D export-list NAME\n-OSPFv6 area parameters\n-OSPFv6 area ID in IP address format\n-Unset the filter for networks announced to other areas\n-Name of the access-list\n-debug igmp\n-Debugging functions (see also 'undebug')\n-IGMP protocol activity\n-neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged\n+IP prefix /, e.g., 35.0.0.0/8\n+Display only the bestpath\n+Display only multipaths\n+no ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole)\n+Negate a command or set its defaults\n+IP information\n+Establish static routes\n+IP destination prefix (e.g. 10.0.0.0/8)\n+IP gateway address\n+IP gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+neighbor (A.B.C.D|X:X::X:X|WORD) passive\n Specify neighbor router\n Neighbor address\n Neighbor IPv6 address\n Neighbor tag\n-BGP attribute is propagated unchanged to this neighbor\n-ipv6 nd suppress-ra\n-Interface IPv6 config commands\n-Neighbor discovery\n-Suppress Router Advertisement\n-show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) A.B.C.D (detail|dump|internal)\n+Don't send open messages to this neighbor\n+test pim receive assert INTERFACE A.B.C.D A.B.C.D A.B.C.D <0-65535> <0-65535> <0-1>\n+Test PIM protocol\n+Test PIM message reception\n+Test reception of PIM assert\n+Interface\n+Neighbor address\n+Assert multicast group address\n+Assert unicast source address\n+Assert metric preference\n+Assert route metric\n+Assert RPT bit flag\n+show zebra client summary\n Show running system information\n-IPv6 information\n-Open Shortest Path First (OSPF) for IPv6\n-Display Link state database\n-Display Router LSAs\n-Display Network LSAs\n-Display Inter-Area-Prefix LSAs\n-Display Inter-Area-Router LSAs\n-Display As-External LSAs\n-Display Group-Membership LSAs\n-Display Type-7 LSAs\n-Display Link LSAs\n-Display Intra-Area-Prefix LSAs\n-Specify Link state ID as IPv4 address notation\n-Display details of LSAs\n-Dump LSAs\n-Display LSA's internal information\n-no neighbor (A.B.C.D|X:X::X:X|WORD) send-community (both|all|extended|standard|large)\n+Zebra information briefClient information brief\n+show bgp ipv4 route-map WORD\n+Show running system information\n+BGP information\n+IP information\n+Display routes matching the route-map\n+A route-map to match on\n+no isis hello-interval <1-600> level-1\n Negate a command or set its defaults\n+IS-IS commands\n+Set Hello interval\n+Hello interval value\n+Holdtime 1 second, interval depends on multiplier\n+Specify hello-interval for level-1 IIHs\n+Specify a network to announce via BGP\n+IPv6 prefix /\n+no hostname dynamic\n+Negate a command or set its defaults\n+Dynamic hostname for IS-IS\n+Dynamic hostname\n+neighbor (A.B.C.D|X:X::X:X|WORD) ebgp-multihop\n Specify neighbor router\n Neighbor address\n Neighbor IPv6 address\n Neighbor tag\n-Send Community attribute to this neighbor\n-Send Standard, Large and Extended Community attributes\n-Send Standard, Large and Extended Community attributes\n-Send Extended Community attributes\n-Send Standard Community attributes\n-Send Large Community attributes\n-aggregate-address A.B.C.D/M as-set\n-Configure BGP aggregate entries\n-Aggregate prefix\n-Generate AS set path information\n-ip irdp debug disable\n-neighbor (A.B.C.D|X:X::X:X|WORD) override-capability\n-Specify neighbor router\n-Neighbor address\n-Neighbor IPv6 address\n-Neighbor tag\n-Override capability negotiation result\n-show bgp ipv4 (encap|multicast|unicast|vpn) flap-statistics A.B.C.D/M longer-prefixes\n-no set ipv6 next-hop local\n-Negate a command or set its defaults\n-Set values in destination routing protocol\n-IPv6 information\n-IPv6 next-hop address\n-IPv6 local address\n-show isis neighbor\n+Allow EBGP neighbors not on directly connected networks\n+show bgp ipv4 (encap|multicast|unicast|vpn) neighbors (A.B.C.D|X:X::X:X) dampened-routes\n Show running system information\n-ISIS network information\n-ISIS neighbor adjacencies\n+BGP information\n+Address Family Modifier\n+Address Family Modifier\n+Address Family Modifier\n+Address Family Modifier\n+Detailed information on TCP and BGP neighbor connections\n+Neighbor to display information about\n+Neighbor to display information about\n+Display the dampened routes received from neighbor\n+show ip route supernets-only vrf all\n+Show running system information\n+IP information\n+IP routing table\n+Show supernet entries only\n+Specify the VRF\n+All VRFs\n+bgp graceful-restart restart-time <1-3600>\n+BGP specific commands\n+Graceful restart capability parameters\n+Set the time to wait to delete stale routes before a BGP open message is received\n+Delay value (seconds)\n+ip prefix-list WORD seq <1-4294967295> (deny|permit) A.B.C.D/M ge <0-32>\n+IP information\n+Build a prefix list\n+Name of a prefix list\n+sequence number of an entry\n+Sequence number\n+Specify packets to reject\n+Specify packets to forward\n+IP prefix /, e.g., 35.0.0.0/8\n+Minimum prefix length to be matched\n+Minimum prefix length\n debug ospf6 spf database\n Debugging functions (see also 'undebug')\n Open Shortest Path First (OSPF) for IPv6\n Debug SPF Calculation\n Log number of LSAs at SPF Calculation time\n-show bgp ipv6 (encap|multicast|unicast|vpn) large-community (AA:BB:CC) (AA:BB:CC)\n+no debug igmp trace\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+IGMP protocol activity\n+IGMP internal daemon activity\n+ip irdp debug packet\n+no set ipv6 next-hop local X:X::X:X\n+Negate a command or set its defaults\n+Set values in destination routing protocol\n+IPv6 information\n+IPv6 next-hop address\n+IPv6 local address\n+IPv6 address of next hop\n+ipv6 route X:X::X:X/M X:X::X:X INTERFACE (reject|blackhole) tag <1-4294967295>\n+IP information\n+Establish static routes\n+IPv6 destination prefix (e.g. 3ffe:506::/32)\n+IPv6 gateway address\n+IPv6 gateway interface name\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n+Set tag for this route\n+Tag value\n+debug bgp as4 segment\n+Debugging functions (see also 'undebug')\n+BGP information\n+BGP AS4 actions\n+BGP AS4 aspath segment handling\n+show bgp ipv6 rsclient (A.B.C.D|X:X::X:X)\n Show running system information\n BGP information\n-Address family\n-Address family modifier\n-Address family modifier\n-Address family modifier\n-Address family modifier\n-Display routes matching the large-communities\n-large-community number\n-large-community number\n-no router-info\n-Negate a command or set its defaults\n-Disable the Router Information functionality\n-redistribute (kernel|connected|static|rip|ospf|isis|pim|babel|nhrp) metric <0-4294967295> route-map WORD\n-Redistribute information from another routing protocol\n-Kernel routes (not installed via the zebra RIB)\n-Connected routes (directly attached subnet or host)\n-Statically configured routes\n-Routing Information Protocol (RIP)\n-Open Shortest Path First (OSPFv2)\n-Intermediate System to Intermediate System (IS-IS)\n-Protocol Independent Multicast (PIM)\n-Babel routing protocol (Babel)\n-Next Hop Resolution Protocol (NHRP)\n-Metric for redistributed routes\n-Default metric\n-Route map reference\n-Pointer to route-map entries\n-clear bgp *\n+Address Family\n+Information about Route Server Client\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+clear ip bgp external in\n Reset functions\n-BGP information\n-Clear all peers\n-no ip rip send version (1|2)\n-Negate a command or set its defaults\n IP information\n-Routing Information Protocol\n-Advertisement transmission\n-Version control\n-Version 1\n-Version 2\n-neighbor (A.B.C.D|X:X::X:X|WORD) capability dynamic\n+BGP information\n+Clear all external peers\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) (detail|)\n+Debugging functions\n+OSPF information\n+OSPF packets\n+OSPF Hello\n+OSPF Database Description\n+OSPF Link State Request\n+OSPF Link State Update\n+OSPF Link State Acknowledgment\n+OSPF all packets\n+Packet sent\n+Packet received\n+Detail Information\n+neighbor (A.B.C.D|X:X::X:X|WORD) route-reflector-client\n Specify neighbor router\n Neighbor address\n Neighbor IPv6 address\n Neighbor tag\n-Advertise capability to the peer\n-Advertise dynamic capability to this neighbor\n-show (ip|ipv6) nhrp (cache|nhs|shortcut|opennhrp|)\n-Show running system information\n-IP information\n-IPv6 information\n-NHRP information\n-Forwarding cache information\n-Next hop server information\n-Shortcut information\n-opennhrpctl style cache dump\n-no ip forwarding\n+Configure a neighbor as Route Reflector client\n+ipv6 nd prefix X:X::X:X/M\n+Interface IPv6 config commands\n+Neighbor discovery\n+Prefix information\n+IPv6 prefix\n+no ip irdp\n Negate a command or set its defaults\n IP information\n-Turn off IP forwarding\n-show ip bgp dampening flap-statistics route-map WORD\n+Disable ICMP Router discovery on this interface\n+no ipv6 nd mtu <1-65535>\n+Negate a command or set its defaults\n+Interface IPv6 config commands\n+Neighbor discovery\n+Advertised MTU\n+MTU in bytes\n+ip ospf cost <1-65535>\n+IP Information\n+OSPF interface commands\n+Interface cost\n+no spf-interval level-1 <1-120>\n+Negate a command or set its defaults\n+Minimum interval between SPF calculations\n+Set interval for level 1 only\n+Minimum interval between consecutive SPFs in seconds\n+debug ssmpingd\n+Debugging functions (see also 'undebug')\n+PIM protocol activity\n+ssmpingd activity\n+show bgp view WORD ipv6 (unicast|multicast) rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M\n Show running system information\n-IP information\n BGP information\n-Display detailed information about dampening\n-Display flap statistics of routes\n-Display routes matching the route-map\n-A route-map to match on\n-show isis mpls-te router\n+BGP view\n+View name\n+Address family\n+Address Family modifier\n+Address Family modifier\n+Information about Route Server Client\n+Neighbor address\n+IPv6 address\n+IP prefix /, e.g., 3ffe::/16\n+ip extcommunity-list <100-500> (deny|permit) .LINE\n+IP information\n+Add a extended community list entry\n+Extended Community list number (expanded)\n+Specify community to reject\n+Specify community to accept\n+An ordered list as a regular-expression\n+no ipv6 route X:X::X:X/M X:X::X:X INTERFACE\n+show ipv6 ospf6 linkstate\n Show running system information\n-IS-IS information\n-MPLS-TE specific commands\n-Router information\n-access-list (<100-199>|<2000-2699>) (deny|permit) ip any host A.B.C.D\n-Add an access list entry\n-IP extended access list\n-IP extended access list (expanded range)\n-Specify packets to reject\n-Specify packets to forward\n-Any Internet Protocol\n-Any source host\n-A single destination host\n-Destination address\n-show bgp ipv6 community (AA:NN|local-AS|no-advertise|no-export) exact-match\n+IPv6 Information\n+Open Shortest Path First (OSPF) for IPv6\n+Display linkstate routing table\n+ipv6 ospf6 advertise prefix-list WORD\n+IPv6 Information\n+Open Shortest Path First (OSPF) for IPv6\n+Advertising options\n+Filter prefix using prefix-list\n+Prefix list name\n+show ipv6 ripng status\n Show running system information\n+IPv6 information\n+Show RIPng routes\n+IPv6 routing protocol process parameters and statistics\n+tunnel source INTERFACE\n+NHRP/GRE integration\n+Tunnel device binding tracking\n+Interface name\n+debug bgp as4\n+Debugging functions (see also 'undebug')\n BGP information\n-Address family\n-Display routes matching the communities\n-community number\n-Do not send outside local AS (well-known community)\n-Do not advertise to any peer (well-known community)\n-Do not export to next AS (well-known community)\n-Exact match of the communities\n-area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535> (hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535> (hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535> (hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535>\n+BGP AS4 actions\n+no debug zebra nht\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+Zebra configuration\n+Debug option set for zebra next hop tracking\n+area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (message-digest-key|) <1-255> md5 KEY\n OSPF area parameters\n OSPF area ID in IP address format\n OSPF area ID as a decimal value\n Configure a virtual link\n Router ID of the remote ABR\n-Time between HELLO packets\n-Time between retransmitting lost link state advertisements\n-Link state transmit delay\n-Interval after which a neighbor is declared dead\n-Time between HELLO packets\n-Time between retransmitting lost link state advertisements\n-Link state transmit delay\n-Interval after which a neighbor is declared dead\n-Time between HELLO packets\n-Time between retransmitting lost link state advertisements\n-Link state transmit delay\n-Interval after which a neighbor is declared dead\n-Time between HELLO packets\n-Time between retransmitting lost link state advertisements\n-Link state transmit delay\n-Interval after which a neighbor is declared dead\n-no timers throttle lsa all\n-Negate a command or set its defaults\n-Adjust routing timers\n-Throttling adaptive timer\n-LSA delay between transmissions\n-no ip prefix-list WORD seq <1-4294967295> (deny|permit) A.B.C.D/M le <0-32> ge <0-32>\n-Negate a command or set its defaults\n-IP information\n-Build a prefix list\n-Name of a prefix list\n-sequence number of an entry\n-Sequence number\n-Specify packets to reject\n-Specify packets to forward\n-IP prefix /, e.g., 35.0.0.0/8\n-Maximum prefix length to be matched\n-Maximum prefix length\n-Minimum prefix length to be matched\n-Minimum prefix length\n-show ip bgp dampening flap-statistics filter-list WORD\n+Message digest authentication password (key)\n+dummy string \n+Use MD5 algorithm\n+The OSPF password (key)\n+show bgp ipv6 (encap|multicast|unicast|vpn) dampening flap-statistics filter-list WORD\n Show running system information\n-IP information\n BGP information\n+IPv6 information\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n+Address Family modifier\n Display detailed information about dampening\n Display flap statistics of routes\n Display routes conforming to the filter-list\n Regular expression access list name\n-show ip bgp ipv4 (unicast|multicast) community-list (<1-500>|WORD) exact-match\n+show bgp ipv4 (encap|multicast|unicast|vpn) flap-statistics A.B.C.D\n Show running system information\n-IP information\n BGP information\n Address family\n Address Family modifier\n Address Family modifier\n-Display routes matching the community-list\n-community-list number\n-community-list name\n-Exact match of the communities\n-no ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE) (reject|blackhole) tag <1-4294967295> <1-255>\n+Address Family modifier\n+Address Family modifier\n+Display flap statistics of routes\n+Network in the BGP routing table to display\n+no ip extcommunity-list standard WORD (deny|permit) .AA:NN\n Negate a command or set its defaults\n IP information\n+Add a extended community list entry\n+Specify standard extcommunity-list\n+Extended Community list name\n+Specify community to reject\n+Specify community to accept\n+Extended community attribute in 'rt aa:nn_or_IPaddr:nn' OR 'soo aa:nn_or_IPaddr:nn' format\n+ip mroute INTERFACE A.B.C.D A.B.C.D\n+IP information\n+Add multicast route\n+Outgoing interface name\n+Group address\n+Source address\n+ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE|null0) tag <1-4294967295> <1-255>\n+IP information\n Establish static routes\n IP destination prefix\n IP destination prefix mask\n IP gateway address\n IP gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Tag of this route\n+Null interface\n+Set tag for this route\n Tag value\n Distance value for this route\n-no ip mroute A.B.C.D/M (A.B.C.D|INTERFACE) <1-255>\n-IP information\n-Configure static unicast route into MRIB for multicast RPF lookup\n-IP destination prefix (e.g. 10.0.0.0/8)\n-Nexthop address\n-Nexthop interface name\n-Distance\n-show ipv6 bgp large-community\n-Show running system information\n-IPv6 information\n-BGP information\n-Display routes matching the large-communities\n-no lsp-gen-interval level-1\n-Negate a command or set its defaults\n-Minimum interval between regenerating same LSP\n-Set interval for level 1 only\n-distance ospf6 intra-area <1-255> inter-area <1-255>\n-Define an administrative distance\n-OSPF6 Administrative distance\n-Intra-area routes\n-Distance for intra-area routes\n-Inter-area routes\n-Distance for inter-area routes\n-redistribute (kernel|connected|static|ospf6|isis|bgp|babel|nhrp)\n-Redistribute\n-Kernel routes (not installed via the zebra RIB)\n-Connected routes (directly attached subnet or host)\n-Statically configured routes\n-Open Shortest Path First (IPv6) (OSPFv3)\n-Intermediate System to Intermediate System (IS-IS)\n-Border Gateway Protocol (BGP)\n-Babel routing protocol (Babel)\n-Next Hop Resolution Protocol (NHRP)\n-show ipv6 ospf6 interface prefix X:X::X:X/M (match|detail)\n+show ipv6 ospf6 route (X:X::X:X|X:X::X:X/M|detail|summary)\n Show running system information\n IPv6 Information\n Open Shortest Path First (OSPF) for IPv6\n-Interface information\n-Display connected prefixes to advertise\n-Display the route\n-Display the route matches the prefix\n-Display details of the prefixes\n-aggregate-address A.B.C.D A.B.C.D as-set summary-only\n-Configure BGP aggregate entries\n-Aggregate address\n-Aggregate mask\n-Generate AS set path information\n-Filter more specific routes from updates\n-clear ip bgp * vpnv4 unicast soft in\n-Reset functions\n-IP information\n-BGP information\n-Clear all peers\n-Address family\n-Address Family Modifier\n-Soft reconfig inbound and outbound updates\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-show ip bgp cidr-only\n-Show running system information\n-IP information\n-BGP information\n-Display only routes with non-natural netmasks\n-no ip route A.B.C.D/M (reject|blackhole) <1-255> vrf <0-65535>\n-Negate a command or set its defaults\n-IP information\n-Establish static routes\n-IP destination prefix (e.g. 10.0.0.0/8)\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Distance value for this route\n-Specify the VRF\n-The VRF ID\n-no ospf transmit-delay\n+Routing Table\n+Specify IPv6 address\n+Specify IPv6 prefix\n+Detailed information\n+Summary of route table\n+no terminal monitor\n Negate a command or set its defaults\n-OSPF interface commands\n-Link state transmit delay\n-debug ospf6 border-routers\n-Debugging functions (see also 'undebug')\n-Open Shortest Path First (OSPF) for IPv6\n-Debug border router\n-no match probability <1-99>\n+Set terminal line parameters\n+Copy debug output to the current terminal line\n+no neighbor (A.B.C.D|X:X::X:X|WORD) nexthop-local unchanged\n Negate a command or set its defaults\n-Match values from routing table\n-Match portion of routes defined by percentage value\n-Percentage of routes\n-ipv6 route X:X::X:X/M X:X::X:X INTERFACE <1-255>\n-network A.B.C.D/M area (A.B.C.D|<0-4294967295>)\n-Enable routing on an IP network\n-OSPF network prefix\n-Set the OSPF area ID\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) self-originated (detail|dump|internal)\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+Configure treatment of outgoing link-local-nexthop attribute\n+Leave link-local nexthop unchanged for this peer\n+show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) linkstate-id A.B.C.D (detail|dump|internal)\n Show running system information\n IPv6 information\n Open Shortest Path First (OSPF) for IPv6\n Display Link state database\n Display Router LSAs\n Display Network LSAs\n Display Inter-Area-Prefix LSAs\n Display Inter-Area-Router LSAs\n Display As-External LSAs\n Display Group-Membership LSAs\n Display Type-7 LSAs\n Display Link LSAs\n Display Intra-Area-Prefix LSAs\n-Display Self-originated LSAs\n+Search by Link state ID\n+Specify Link state ID as IPv4 address notation\n Display details of LSAs\n Dump LSAs\n Display LSA's internal information\n-no ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) (reject|blackhole)\n-show bgp ipv6 summary\n-Show running system information\n+clear bgp ipv6 (A.B.C.D|X:X::X:X) soft in\n+Reset functions\n BGP information\n Address family\n-Summary of BGP neighbor status\n-no ip pim hello {<1-180> <1-180>}\n+BGP neighbor address to clear\n+BGP IPv6 neighbor to clear\n+Soft reconfig inbound and outbound updates\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+no auto-summary\n+Negate a command or set its defaults\n+Enable automatic network number summarization\n+continue <1-65536>\n+Exit policy on matches\n+Goto Clause number\n+ip ospf dead-interval <1-65535>\n+IP Information\n+OSPF interface commands\n+Interval after which a neighbor is declared dead\n+no bgp default local-preference\n Negate a command or set its defaults\n+BGP specific commands\n+Configure BGP defaults\n+local preference (higher=more preferred)\n+show ipv6 route\n+Show running system information\n+IP information\n+IPv6 routing table\n+show ip pim jp-override-interval\n+Show running system information\n IP information\n PIM information\n-Hello Interval\n-Time in seconds for Hello Interval\n-Time in seconds for Hold Interval\n-show ip bgp neighbors (A.B.C.D|X:X::X:X) received prefix-filter\n+PIM interface J/P override interval\n+show ip route summary\n Show running system information\n IP information\n-BGP information\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display information received from a BGP neighbor\n-Display the prefixlist filter\n-no ospf router-id\n+IP routing table\n+Summary of all routes\n+no set ip next-hop A.B.C.D\n+Negate a command or set its defaults\n+Set values in destination routing protocol\n+IP information\n+Next hop address\n+IP address of next hop\n+no ip prefix-list WORD seq <1-4294967295> (deny|permit) A.B.C.D/M le <0-32> ge <0-32>\n Negate a command or set its defaults\n-OSPF specific commands\n-router-id for the OSPF process\n-area A.B.C.D range X:X::X:X/M\n-ip prefix-list WORD (deny|permit) A.B.C.D/M le <0-32> ge <0-32>\n IP information\n Build a prefix list\n Name of a prefix list\n+sequence number of an entry\n+Sequence number\n Specify packets to reject\n Specify packets to forward\n IP prefix /, e.g., 35.0.0.0/8\n Maximum prefix length to be matched\n Maximum prefix length\n Minimum prefix length to be matched\n Minimum prefix length\n-no nhrp nflog-group [<1-65535>]\n-Negate a command or set its defaults\n-Next Hop Resolution Protocol functions\n-Specify NFLOG group number\n-NFLOG group number\n-debug ssmpingd\n-Debugging functions (see also 'undebug')\n-PIM protocol activity\n-ssmpingd activity\n-show bgp ipv6 (encap|multicast|unicast|vpn) dampened-paths\n-Show running system information\n-BGP information\n-IPv6 information\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Display paths suppressed due to dampening\n-show bgp view WORD ipv6 summary\n-Show running system information\n-BGP information\n-IPv6 information\n-Address Family modifier\n-Address Family modifier\n-BGP view\n-View name\n-Summary of BGP neighbor status\n-show bgp ipv4 vpn tags\n-Show running system information\n-BGP information\n-Address Family\n-Display VPN NLRI specific information\n-Display BGP tags for prefixes\n-show bgp ipv4 community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n+show bgp ipv6 (encap|multicast|unicast|vpn) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n Show running system information\n BGP information\n-IP information\n+Address family\n+Address family modifier\n+Address family modifier\n+Address family modifier\n+Address family modifier\n Display routes matching the communities\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n community number\n Do not send outside local AS (well-known community)\n Do not advertise to any peer (well-known community)\n Do not export to next AS (well-known community)\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n Exact match of the communities\n-no isis priority <0-127> level-2\n-Negate a command or set its defaults\n-IS-IS commands\n-Set priority for Designated Router election\n-Priority value\n-Specify priority for level-2 routing\n-show ip route summary prefix\n-Show running system information\n-IP information\n-IP routing table\n-Summary of all routes\n-Prefix routes\n-show ipv6 ospf6 database\n-Show running system information\n+match ipv6 address WORD\n+Match values from routing table\n IPv6 information\n-Open Shortest Path First (OSPF) for IPv6\n-Display Link state database\n-ipv6 access-list WORD (deny|permit) X:X::X:X/M\n+Match IPv6 address of route\n+IPv6 access-list name\n+show bgp community (AA:NN|local-AS|no-advertise|no-export)\n+Show running system information\n+BGP information\n+Display routes matching the communities\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+timers bgp <0-65535> <0-65535>\n+Adjust routing timers\n+BGP timers\n+Keepalive interval\n+Holdtime\n+clear bgp ipv6 external soft\n+Reset functions\n+BGP information\n+Address family\n+Clear all external peers\n+Soft reconfig inbound and outbound updates\n+debug rip packet (recv|send)\n+Debugging functions (see also 'undebug')\n+RIP information\n+RIP packet\n+RIP receive packet\n+RIP send packet\n+no ipv6 nd mtu\n+Negate a command or set its defaults\n+Interface IPv6 config commands\n+Neighbor discovery\n+Advertised MTU\n+Negate a command or set its defaults\n+Define an administrative distance\n+OSPF Administrative distance\n+no ipv6 prefix-list WORD seq <1-4294967295> (deny|permit) X:X::X:X/M le <0-128>\n+Negate a command or set its defaults\n IPv6 information\n-Add an access list entry\n-IPv6 zebra access-list\n+Build a prefix list\n+Name of a prefix list\n+sequence number of an entry\n+Sequence number\n Specify packets to reject\n Specify packets to forward\n-Prefix to match. e.g. 3ffe:506::/32\n-no network A.B.C.D route-map WORD\n-Negate a command or set its defaults\n-Specify a network to announce via BGP\n-Network number\n-Route-map to modify the attributes\n-Name of the route map\n-distance ospf6 external <1-255>\n-Define an administrative distance\n-OSPF6 Administrative distance\n-External routes\n-Distance for external routes\n-show bgp view WORD ipv6\n-Show running system information\n+IPv6 prefix /, e.g., 3ffe::/16\n+Maximum prefix length to be matched\n+Maximum prefix length\n+bgp fast-external-failover\n BGP information\n-BGP view\n-View name\n-Address family\n-show ip route (kernel|connected|static|rip|ospf|isis|bgp|pim|babel|nhrp) vrf <0-65535>\n-Show running system information\n-IP information\n-IP routing table\n-Kernel routes (not installed via the zebra RIB)\n-Connected routes (directly attached subnet or host)\n-Statically configured routes\n-Routing Information Protocol (RIP)\n-Open Shortest Path First (OSPFv2)\n-Intermediate System to Intermediate System (IS-IS)\n-Border Gateway Protocol (BGP)\n-Protocol Independent Multicast (PIM)\n-Babel routing protocol (Babel)\n-Next Hop Resolution Protocol (NHRP)\n-Specify the VRF\n-The VRF ID\n-ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE|null0) tag <1-4294967295> <1-255>\n+Immediately reset session if a link to a directly connected external peer goes down\n+ipv6 nd prefix X:X::X:X/M (<0-4294967295>|infinite) (<0-4294967295>|infinite) (router-address|)\n+Interface IPv6 config commands\n+Neighbor discovery\n+Prefix information\n+IPv6 prefix\n+Valid lifetime in seconds\n+Infinite valid lifetime\n+Preferred lifetime in seconds\n+Infinite preferred lifetime\n+Set Router Address flag\n+neighbor (A.B.C.D|X:X::X:X|WORD) timers connect <1-65535>\n+Specify neighbor router\n+Neighbor address\n+Neighbor IPv6 address\n+Neighbor tag\n+BGP per neighbor timers\n+BGP connect timer\n+Connect timer\n+no debug igmp\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+IGMP protocol activity\n+no set aggregator as <1-4294967295> A.B.C.D\n+Negate a command or set its defaults\n+Set values in destination routing protocol\n+BGP aggregator attribute\n+AS number of aggregator\n+AS number\n+IP address of aggregator\n+no ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole) <1-255> vrf <0-65535>\n+Negate a command or set its defaults\n IP information\n Establish static routes\n-IP destination prefix\n-IP destination prefix mask\n+IP destination prefix (e.g. 10.0.0.0/8)\n IP gateway address\n IP gateway interface name\n-Null interface\n-Set tag for this route\n-Tag value\n+Emit an ICMP unreachable when matched\n+Silently discard pkts when matched\n Distance value for this route\n-clear bgp <1-4294967295> soft in\n-Reset functions\n-BGP information\n-Clear peers with the AS number\n-Soft reconfig inbound and outbound updates\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-area (A.B.C.D|<0-4294967295>) authentication\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Enable authentication\n-debug zebra rib\n-Debugging functions (see also 'undebug')\n-Zebra configuration\n-Debug RIB events\n-no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D\n+Specify the VRF\n+The VRF ID\n+no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D (hello-interval|retransmit-interval|transmit-delay|dead-interval) (hello-interval|retransmit-interval|transmit-delay|dead-interval)\n Negate a command or set its defaults\n OSPF area parameters\n OSPF area ID in IP address format\n OSPF area ID as a decimal value\n Configure a virtual link\n Router ID of the remote ABR\n-no ip ospf transmit-delay\n-Negate a command or set its defaults\n-IP Information\n-OSPF interface commands\n+Time between HELLO packets\n+Time between retransmitting lost link state advertisements\n Link state transmit delay\n-show ip pim upstream-join-desired\n+Interval after which a neighbor is declared dead\n+Time between HELLO packets\n+Time between retransmitting lost link state advertisements\n+Link state transmit delay\n+Interval after which a neighbor is declared dead\n+no debug ospf6 border-routers area-id\n+Negate a command or set its defaults\n+Debugging functions (see also 'undebug')\n+Open Shortest Path First (OSPF) for IPv6\n+Debug border router\n+Debug border routers in specific Area\n+show ip route A.B.C.D\n Show running system information\n IP information\n-PIM information\n-PIM upstream join-desired\n-version <1-2>\n-Set routing protocol version\n-lsp-mtu <128-4352>\n-Configure the maximum size of generated LSPs\n-Maximum size of generated LSPs\n-show bgp ipv4 (encap|multicast|unicast|vpn) regexp .LINE\n+IP routing table\n+Network in the IP routing table to display\n+show bgp ipv4 (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match\n Show running system information\n BGP information\n Address family\n Address Family modifier\n Address Family modifier\n-Address Family modifier\n-Address Family modifier\n-Display routes matching the AS path regular expression\n-A regular-expression to match the BGP AS paths\n-no isis hello-interval level-1\n-Negate a command or set its defaults\n-IS-IS commands\n-Set Hello interval\n-Specify hello-interval for level-1 IIHs\n-show ipv6 mbgp community\n-Show running system information\n-IPv6 information\n-MBGP information\n Display routes matching the communities\n-show bgp neighbors (A.B.C.D|X:X::X:X) dampened-routes\n-Show running system information\n-BGP information\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor to display information about\n-Neighbor to display information about\n-Display the dampened routes received from neighbor\n-redistribute (kernel|connected|static|ospf|isis|bgp|pim|babel|nhrp) route-map WORD\n-Redistribute information from another routing protocol\n-Kernel routes (not installed via the zebra RIB)\n-Connected routes (directly attached subnet or host)\n-Statically configured routes\n-Open Shortest Path First (OSPFv2)\n-Intermediate System to Intermediate System (IS-IS)\n-Border Gateway Protocol (BGP)\n-Protocol Independent Multicast (PIM)\n-Babel routing protocol (Babel)\n-Next Hop Resolution Protocol (NHRP)\n-Route map reference\n-Pointer to route-map entries\n-no redistribute (kernel|connected|static|ospf6|isis|bgp|babel|nhrp) metric <0-16> route-map WORD\n-show ip access-list (<1-99>|<100-199>|<1300-1999>|<2000-2699>|WORD)\n-Show running system information\n-IP information\n-List IP access lists\n-IP standard access list\n-IP extended access list\n-IP standard access list (expanded range)\n-IP extended access list (expanded range)\n-IP zebra access-list\n-no ospf priority\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+community number\n+Do not send outside local AS (well-known community)\n+Do not advertise to any peer (well-known community)\n+Do not export to next AS (well-known community)\n+Exact match of the communities\n+no neighbor (A.B.C.D|X:X::X:X|WORD) activate\n Negate a command or set its defaults\n-OSPF interface commands\n-Router priority\n-neighbor (A.B.C.D|X:X::X:X|WORD) route-map WORD (in|out|import|export)\n Specify neighbor router\n Neighbor address\n Neighbor IPv6 address\n Neighbor tag\n-Apply route map to neighbor\n-Name of route map\n-Apply map to incoming routes\n-Apply map to outbound routes\n-Apply map to routes going into a Route-Server client's table\n-Apply map to routes coming from a Route-Server client\n-show ip bgp ipv4 (unicast|multicast) A.B.C.D\n-Show running system information\n-IP information\n-BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Network in the BGP routing table to display\n-allow-ecmp\n-Allow Equal Cost MultiPath\n-clear ip bgp <1-4294967295> vpnv4 unicast in\n+Enable the Address Family for this Neighbor\n+clear ip bgp peer-group WORD ipv4 (unicast|multicast) in prefix-filter\n Reset functions\n IP information\n BGP information\n-Clear peers with the AS number\n+Clear all members of peer-group\n+BGP peer-group name\n Address family\n Address Family modifier\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-no debug isis update-packets\n-Disable debugging functions (see also 'debug')\n-IS-IS information\n-IS-IS Update related packets\n-clear ip bgp view WORD *\n-Reset functions\n-IP information\n-BGP information\n-BGP view\n-view name\n-Clear all peers\n-undebug all bgp\n-Disable debugging functions (see also 'debug')\n-Enable all debugging\n-BGP information\n-clear bgp (A.B.C.D|X:X::X:X) soft out\n-Reset functions\n-BGP information\n-BGP neighbor address to clear\n-BGP IPv6 neighbor to clear\n-Soft reconfig inbound and outbound updates\n-Resend all outbound updates\n-no ipv6 route X:X::X:X/M X:X::X:X INTERFACE vrf <0-65535>\n-Negate a command or set its defaults\n-IP information\n-Establish static routes\n-IPv6 destination prefix (e.g. 3ffe:506::/32)\n-IPv6 gateway address\n-IPv6 gateway interface name\n-Specify the VRF\n-The VRF ID\n-ip community-list <100-500> (deny|permit) .LINE\n-IP information\n-Add a community list entry\n-Community list number (expanded)\n-Specify community to reject\n-Specify community to accept\n-An ordered list as a regular-expression\n-set-overload-bit\n-Set overload bit to avoid any transit traffic\n-Set overload bit\n-show bgp ipv6 X:X::X:X\n-Show running system information\n-BGP information\n-Address family\n-Network in the BGP routing table to display\n-clear ip bgp <1-4294967295> encap unicast soft out\n-Reset functions\n-IP information\n-BGP information\n-Clear peers with the AS number\n-Address family\n Address Family modifier\n-Soft reconfig\n-Soft reconfig outbound update\n-clear ip prefix-list WORD A.B.C.D/M\n-Reset functions\n-IP information\n-Build a prefix list\n-Name of a prefix list\n-IP prefix /, e.g., 35.0.0.0/8\n-no distance bgp\n-Negate a command or set its defaults\n-Define an administrative distance\n-BGP distance\n-show isis database detail\n-Show running system information\n-IS-IS information\n-IS-IS link state database\n-ipv6 route X:X::X:X/M X:X::X:X INTERFACE (reject|blackhole)\n-show ipv6 ospf6 database linkstate-id A.B.C.D\n-Show running system information\n-IPv6 information\n-Open Shortest Path First (OSPF) for IPv6\n-Display Link state database\n-Search by Link state ID\n-Specify Link state ID as IPv4 address notation\n-ip rip send version 2 1\n-IP information\n-Routing Information Protocol\n-Advertisement transmission\n-Version control\n-RIP version 2\n-RIP version 1\n-ip irdp broadcast\n-IP information\n-ICMP Router discovery on this interface using broadcast\n-delay-variation <0-16777215>\n-Unidirectional Link Delay Variation\n-delay variation in micro-second as decimal (0...16777215)\n-no multicast\n-Negate a command or set its defaults\n-Unset multicast flag to interface\n-set metric-type (type-1|type-2)\n-Set value\n-Type of metric\n-OSPF6 external type 1 metric\n-OSPF6 external type 2 metric\n-show ip route summary\n-Show running system information\n-IP information\n-IP routing table\n-Summary of all routes\n-Administrative distance\n-Distance value\n-IP source prefix\n-Access list name\n-no neighbor (A.B.C.D|X:X::X:X|WORD) maximum-prefix <1-4294967295> warning-only\n+Send route-refresh unless using 'soft-reconfiguration inbound'\n+Push out prefix-list ORF and do inbound soft reconfig\n+no neighbor (A.B.C.D|X:X::X:X|WORD) soft-reconfiguration inbound\n Negate a command or set its defaults\n Specify neighbor router\n Neighbor address\n Neighbor IPv6 address\n Neighbor tag\n-Maximum number of prefix accept from this peer\n-maximum no. of prefix limit\n-Only give warning message when limit is exceeded\n-no bandwidth\n-Negate a command or set its defaults\n-Set bandwidth informational parameter\n-no debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv|detail)\n-show bgp ipv6 (multicast|unicast) neighbors (A.B.C.D|X:X::X:X) routes\n-Show running system information\n-BGP information\n-Address family\n-Address Family modifier\n-Address Family modifier\n-Detailed information on TCP and BGP neighbor connections\n-Neighbor address\n-IPv6 address\n-Neighbor address\n-IPv6 address\n-Display routes learned from neighbor\n-no ip rip authentication mode (md5|text)\n-Negate a command or set its defaults\n-IP information\n-Routing Information Protocol\n-Authentication control\n-Authentication mode\n-Keyed message digest\n-Clear text authentication\n-call WORD\n-Jump to another Route-Map after match+set\n-Target route-map name\n-no distance <1-255> X:X::X:X/M\n-Negate a command or set its defaults\n-Administrative distance\n-Distance value\n-IP source prefix\n-show ipv6 route X:X::X:X/M vrf <0-65535>\n-Show running system information\n-IP information\n-IPv6 routing table\n-IPv6 prefix\n-Specify the VRF\n-The VRF ID\n-bgp bestpath med confed missing-as-worst\n-ipv6 nd prefix X:X::X:X/M (<0-4294967295>|infinite) (<0-4294967295>|infinite) (router-address|)\n-Interface IPv6 config commands\n-Neighbor discovery\n-Prefix information\n-IPv6 prefix\n-Valid lifetime in seconds\n-Infinite valid lifetime\n-Preferred lifetime in seconds\n-Infinite preferred lifetime\n-Set Router Address flag\n-no log-adjacency-changes\n+Per neighbor soft reconfiguration\n+Allow inbound soft reconfiguration for this neighbor\n+Modify RIP metric\n+Access-list name\n+For incoming updates\n+For outgoing updates\n+Metric value\n+Interface to match\n+match extcommunity (<1-99>|<100-500>|WORD)\n+Match values from routing table\n+Match BGP/VPN extended community list\n+Extended community-list number (standard)\n+Extended community-list number (expanded)\n+Extended community-list name\n+no neighbor (A.B.C.D|X:X::X:X|WORD) maximum-prefix <1-4294967295>\n Negate a command or set its defaults\n-Log changes in adjacency state\n-neighbor (A.B.C.D|X:X::X:X|WORD) disable-connected-check\n Specify neighbor router\n Neighbor address\n Neighbor IPv6 address\n Neighbor tag\n-one-hop away EBGP peer using loopback address\n-ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) (reject|blackhole) tag <1-4294967295>\n-IP information\n-Establish static routes\n-IPv6 destination prefix (e.g. 3ffe:506::/32)\n-IPv6 gateway address\n-IPv6 gateway interface name\n-Emit an ICMP unreachable when matched\n-Silently discard pkts when matched\n-Set tag for this route\n-Tag value\n-clear ip bgp A.B.C.D in prefix-filter\n-Reset functions\n-IP information\n-BGP information\n-BGP neighbor address to clear\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-Push out the existing ORF prefix-list\n-show ipv6 access-list WORD\n+Maximum number of prefix accept from this peer\n+maximum no. of prefix limit\n+show ip bgp ipv4 (unicast|multicast) A.B.C.D/M longer-prefixes\n Show running system information\n-IPv6 information\n-List IPv6 access lists\n-IPv6 zebra access-list\n-clear bgp ipv6 <1-4294967295> soft in\n-Reset functions\n+IP information\n BGP information\n Address family\n-Clear peers with the AS number\n-Soft reconfig inbound and outbound updates\n-Send route-refresh unless using 'soft-reconfiguration inbound'\n-no ip ssmpingd [A.B.C.D]\n-Negate a command or set its defaults\n-IP information\n-Enable ssmpingd operation\n-Source address\n-distance ospf6 inter-area <1-255> intra-area <1-255> external <1-255>\n+Address Family modifier\n+Address Family modifier\n+IP prefix /, e.g., 35.0.0.0/8\n+Display route and more specific routes\n+distance ospf6 inter-area <1-255> external <1-255>\n Define an administrative distance\n OSPF6 Administrative distance\n Inter-area routes\n Distance for inter-area routes\n-Intra-area routes\n-Distance for intra-area routes\n External routes\n Distance for external routes\n-no neighbor (A.B.C.D|X:X::X:X|WORD) attribute-unchanged med as-path next-hop\n-no bgp graceful-restart restart-time <1-3600>\n+no bgp config-type\n Negate a command or set its defaults\n-BGP specific commands\n-Graceful restart capability parameters\n-Set the time to wait to delete stale routes before a BGP open message is received\n-Delay value (seconds)\n-no ospf cost\n+BGP information\n+Display configuration type\n+no set comm-list (<1-99>|<100-500>|WORD) delete\n Negate a command or set its defaults\n-OSPF interface commands\n-Interface cost\n-no ip ospf mtu-ignore\n-show bgp view WORD ipv6 neighbors (A.B.C.D|X:X::X:X) routes\n+Set values in destination routing protocol\n+set BGP community list (for deletion)\n+Community-list number (standard)\n+Community-list number (expanded)\n+Community-list name\n+Delete matching communities\n+show bgp view WORD rsclient (A.B.C.D|X:X::X:X) X:X::X:X\n+Show running system information\n+BGP information\n+BGP view\n+View name\n+Information about Route Server Client\n+Neighbor address\n+IPv6 address\n+Network in the BGP routing table to display\n+show bgp view WORD neighbors (A.B.C.D|X:X::X:X)\n Show running system information\n BGP information\n BGP view\n View name\n-Address family\n Detailed information on TCP and BGP neighbor connections\n Neighbor to display information about\n Neighbor to display information about\n-Display routes learned from neighbor\n-show bgp ipv6 encap summary\n-Show running system information\n-BGP information\n-Display ENCAP NLRI specific information\n-Summary of BGP neighbor status\n-no max-lsp-lifetime level-1\n+no ip mroute INTERFACE A.B.C.D A.B.C.D\n Negate a command or set its defaults\n-LSP lifetime for Level 1 only in seconds\n-show ipv6 ospf6 database (router|network|inter-prefix|inter-router|as-external|group-membership|type-7|link|intra-prefix) A.B.C.D\n-Show running system information\n-IPv6 information\n-Open Shortest Path First (OSPF) for IPv6\n-Display Link state database\n-Display Router LSAs\n-Display Network LSAs\n-Display Inter-Area-Prefix LSAs\n-Display Inter-Area-Router LSAs\n-Display As-External LSAs\n-Display Group-Membership LSAs\n-Display Type-7 LSAs\n-Display Link LSAs\n-Display Intra-Area-Prefix LSAs\n-Specify Link state ID as IPv4 address notation\n-show ip route A.B.C.D/M longer-prefixes vrf <0-65535>\n-Show running system information\n IP information\n-IP routing table\n-IP prefix /, e.g., 35.0.0.0/8\n-Show route matching the specified Network/Mask pair only\n-Specify the VRF\n-The VRF ID\n-aggregate-address A.B.C.D/M\n-Configure BGP aggregate entries\n-Aggregate prefix\n-area (A.B.C.D|<0-4294967295>) stub\n-OSPF area parameters\n-OSPF area ID in IP address format\n-OSPF area ID as a decimal value\n-Configure OSPF area as stub\n-ipv6 prefix-list WORD (deny|permit) X:X::X:X/M ge <0-128> le <0-128>\n-IPv6 information\n-Build a prefix list\n-Name of a prefix list\n-Specify packets to reject\n-Specify packets to forward\n-IPv6 prefix /