libtool: install: chmod 644 /tmp/instance-0/output-1/target/usr/lib/liburg_common.a libtool: install: /tmp/instance-0/output-1/host/bin/sparc-linux-ranlib /tmp/instance-0/output-1/target/usr/lib/liburg_common.a libtool: install: warning: remember to run `libtool --finish /usr/lib' /usr/bin/mkdir -p '/tmp/instance-0/output-1/target/usr/include/urg' /usr/bin/install -c -m 644 RingBuffer.h split.h '/tmp/instance-0/output-1/target/usr/include/urg' make[5]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/common' make[4]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/common' Making install in geometry make[4]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/geometry' make[5]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/geometry' /usr/bin/mkdir -p '/tmp/instance-0/output-1/target/usr/lib' /bin/bash ../../../libtool --mode=install /usr/bin/install -c liburg_geometry.la '/tmp/instance-0/output-1/target/usr/lib' libtool: install: /usr/bin/install -c .libs/liburg_geometry.lai /tmp/instance-0/output-1/target/usr/lib/liburg_geometry.la libtool: install: /usr/bin/install -c .libs/liburg_geometry.a /tmp/instance-0/output-1/target/usr/lib/liburg_geometry.a libtool: install: chmod 644 /tmp/instance-0/output-1/target/usr/lib/liburg_geometry.a libtool: install: /tmp/instance-0/output-1/host/bin/sparc-linux-ranlib /tmp/instance-0/output-1/target/usr/lib/liburg_geometry.a libtool: install: warning: remember to run `libtool --finish /usr/lib' /usr/bin/mkdir -p '/tmp/instance-0/output-1/target/usr/include/urg' /usr/bin/install -c -m 644 Position.h Angle.h Point.h '/tmp/instance-0/output-1/target/usr/include/urg' make[5]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/geometry' make[4]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/geometry' Making install in coordinate make[4]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/coordinate' make[5]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/coordinate' /usr/bin/mkdir -p '/tmp/instance-0/output-1/target/usr/lib' /bin/bash ../../../libtool --mode=install /usr/bin/install -c liburg_coordinate.la '/tmp/instance-0/output-1/target/usr/lib' libtool: install: /usr/bin/install -c .libs/liburg_coordinate.lai /tmp/instance-0/output-1/target/usr/lib/liburg_coordinate.la libtool: install: /usr/bin/install -c .libs/liburg_coordinate.a /tmp/instance-0/output-1/target/usr/lib/liburg_coordinate.a libtool: install: chmod 644 /tmp/instance-0/output-1/target/usr/lib/liburg_coordinate.a libtool: install: /tmp/instance-0/output-1/host/bin/sparc-linux-ranlib /tmp/instance-0/output-1/target/usr/lib/liburg_coordinate.a libtool: install: warning: remember to run `libtool --finish /usr/lib' /usr/bin/mkdir -p '/tmp/instance-0/output-1/target/usr/include/urg' /usr/bin/install -c -m 644 Coordinate.h '/tmp/instance-0/output-1/target/usr/include/urg' make[5]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/coordinate' make[4]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/coordinate' Making install in connection make[4]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/connection' Making install in sdl make[5]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/connection/sdl' make[6]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/connection/sdl' /usr/bin/mkdir -p '/tmp/instance-0/output-1/target/usr/lib' /bin/bash ../../../../libtool --mode=install /usr/bin/install -c liburg_connection_sdl.la '/tmp/instance-0/output-1/target/usr/lib' libtool: install: /usr/bin/install -c .libs/liburg_connection_sdl.lai /tmp/instance-0/output-1/target/usr/lib/liburg_connection_sdl.la libtool: install: /usr/bin/install -c .libs/liburg_connection_sdl.a /tmp/instance-0/output-1/target/usr/lib/liburg_connection_sdl.a libtool: install: chmod 644 /tmp/instance-0/output-1/target/usr/lib/liburg_connection_sdl.a libtool: install: /tmp/instance-0/output-1/host/bin/sparc-linux-ranlib /tmp/instance-0/output-1/target/usr/lib/liburg_connection_sdl.a libtool: install: warning: remember to run `libtool --finish /usr/lib' /usr/bin/mkdir -p '/tmp/instance-0/output-1/target/usr/include/urg' /usr/bin/install -c -m 644 TcpipServer.h '/tmp/instance-0/output-1/target/usr/include/urg' make[6]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/connection/sdl' make[5]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/connection/sdl' make[5]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/connection' make[6]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/connection' /usr/bin/mkdir -p '/tmp/instance-0/output-1/target/usr/lib' /bin/bash ../../../libtool --mode=install /usr/bin/install -c liburg_connection.la '/tmp/instance-0/output-1/target/usr/lib' libtool: install: /usr/bin/install -c .libs/liburg_connection.lai /tmp/instance-0/output-1/target/usr/lib/liburg_connection.la libtool: install: /usr/bin/install -c .libs/liburg_connection.a /tmp/instance-0/output-1/target/usr/lib/liburg_connection.a libtool: install: chmod 644 /tmp/instance-0/output-1/target/usr/lib/liburg_connection.a libtool: install: /tmp/instance-0/output-1/host/bin/sparc-linux-ranlib /tmp/instance-0/output-1/target/usr/lib/liburg_connection.a libtool: install: warning: remember to run `libtool --finish /usr/lib' /usr/bin/mkdir -p '/tmp/instance-0/output-1/target/usr/include/urg' /usr/bin/install -c -m 644 Connection.h SerialDevice.h ConnectionUtils.h FindComPorts.h isUsingComDriver.h IsUsbCom.h TcpipSocket.h '/tmp/instance-0/output-1/target/usr/include/urg' make[6]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/connection' make[5]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/connection' make[4]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/connection' Making install in system make[4]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/system' make[5]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/system' /usr/bin/mkdir -p '/tmp/instance-0/output-1/target/usr/lib' /bin/bash ../../../libtool --mode=install /usr/bin/install -c liburg_system.la '/tmp/instance-0/output-1/target/usr/lib' libtool: install: /usr/bin/install -c .libs/liburg_system.lai /tmp/instance-0/output-1/target/usr/lib/liburg_system.la libtool: install: /usr/bin/install -c .libs/liburg_system.a /tmp/instance-0/output-1/target/usr/lib/liburg_system.a libtool: install: chmod 644 /tmp/instance-0/output-1/target/usr/lib/liburg_system.a libtool: install: /tmp/instance-0/output-1/host/bin/sparc-linux-ranlib /tmp/instance-0/output-1/target/usr/lib/liburg_system.a libtool: install: warning: remember to run `libtool --finish /usr/lib' /usr/bin/mkdir -p '/tmp/instance-0/output-1/target/usr/include/urg' /usr/bin/install -c -m 644 DetectOS.h Thread.h Lock.h LockGuard.h Semaphore.h ticks.h delay.h ConditionVariable.h MathUtils.h log_printf.h '/tmp/instance-0/output-1/target/usr/include/urg' make[5]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/system' make[4]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/system' Making install in urg make[4]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/urg' make[5]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/urg' /usr/bin/mkdir -p '/tmp/instance-0/output-1/target/usr/lib' /bin/bash ../../../libtool --mode=install /usr/bin/install -c liburg.la '/tmp/instance-0/output-1/target/usr/lib' libtool: install: /usr/bin/install -c .libs/liburg.lai /tmp/instance-0/output-1/target/usr/lib/liburg.la libtool: install: /usr/bin/install -c .libs/liburg.a /tmp/instance-0/output-1/target/usr/lib/liburg.a libtool: install: chmod 644 /tmp/instance-0/output-1/target/usr/lib/liburg.a libtool: install: /tmp/instance-0/output-1/host/bin/sparc-linux-ranlib /tmp/instance-0/output-1/target/usr/lib/liburg.a libtool: install: warning: remember to run `libtool --finish /usr/lib' /usr/bin/mkdir -p '/tmp/instance-0/output-1/target/usr/include/urg' /usr/bin/install -c -m 644 RangeSensor.h CaptureSettings.h RangeSensorParameter.h RangeCaptureMode.h UrgUsbCom.h UrgUtils.h findUrgPorts.h UrgDevice.h UrgCtrl.h '/tmp/instance-0/output-1/target/usr/include/urg' make[5]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/urg' make[4]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/urg' Making install in monitor make[4]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/monitor' make[5]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/monitor' /usr/bin/mkdir -p '/tmp/instance-0/output-1/target/usr/lib' /bin/bash ../../../libtool --mode=install /usr/bin/install -c liburg_monitor.la '/tmp/instance-0/output-1/target/usr/lib' libtool: install: /usr/bin/install -c .libs/liburg_monitor.lai /tmp/instance-0/output-1/target/usr/lib/liburg_monitor.la libtool: install: /usr/bin/install -c .libs/liburg_monitor.a /tmp/instance-0/output-1/target/usr/lib/liburg_monitor.a libtool: install: chmod 644 /tmp/instance-0/output-1/target/usr/lib/liburg_monitor.a libtool: install: /tmp/instance-0/output-1/host/bin/sparc-linux-ranlib /tmp/instance-0/output-1/target/usr/lib/liburg_monitor.a libtool: install: warning: remember to run `libtool --finish /usr/lib' /usr/bin/mkdir -p '/tmp/instance-0/output-1/target/usr/include/urg' /usr/bin/install -c -m 644 MonitorDataHandler.h MonitorModeManager.h MonitorEventScheduler.h DeviceIpManager.h LogNameHolder.h mConnection.h mUrgDevice.h UrgServer.h DeviceServer.h '/tmp/instance-0/output-1/target/usr/include/urg' make[5]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/monitor' make[4]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp/monitor' make[4]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp' make[5]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp' make[4]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp' make[3]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src/cpp' make[3]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src' make[4]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/src' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src' make[3]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src' make[2]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/src' Making install in samples make[2]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples' Making install in c make[3]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples/c' make[4]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples/c' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples/c' make[3]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples/c' Making install in cpp make[3]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples/cpp' make[4]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples/cpp' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples/cpp' make[3]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples/cpp' Making install in scip_samples make[3]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples/scip_samples' make[4]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples/scip_samples' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples/scip_samples' make[3]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples/scip_samples' Making install in cpp_ethernet make[3]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples/cpp_ethernet' make[4]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples/cpp_ethernet' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples/cpp_ethernet' make[3]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples/cpp_ethernet' make[3]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples' make[4]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples' make[3]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples' make[2]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18/samples' make[2]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18' make[3]: Entering directory '/tmp/instance-0/output-1/build/urg-0.8.18' /usr/bin/mkdir -p '/tmp/instance-0/output-1/target/usr/bin' /usr/bin/install -c urg-config c_urg-config '/tmp/instance-0/output-1/target/usr/bin' make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18' make[2]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18' make[1]: Leaving directory '/tmp/instance-0/output-1/build/urg-0.8.18' utf8proc-2.6.1.tar.gz: OK (sha256: 4c06a9dc4017e8a2438ef80ee371d45868bda2237a98b26554de7a95406b283b) >>> utf8proc 2.6.1 Extracting gzip -d -c /tmp/instance-0/dl/utf8proc/utf8proc-2.6.1.tar.gz | tar --strip-components=1 -C /tmp/instance-0/output-1/build/utf8proc-2.6.1 -xf - >>> utf8proc 2.6.1 Patching >>> utf8proc 2.6.1 Configuring (mkdir -p /tmp/instance-0/output-1/build/utf8proc-2.6.1//buildroot-build && cd /tmp/instance-0/output-1/build/utf8proc-2.6.1//buildroot-build && rm -f CMakeCache.txt && PATH="/tmp/instance-0/output-1/host/bin:/tmp/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" /tmp/instance-0/output-1/host/bin/cmake /tmp/instance-0/output-1/build/utf8proc-2.6.1/ -DCMAKE_TOOLCHAIN_FILE="/tmp/instance-0/output-1/host/share/buildroot/toolchainfile.cmake" -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DBUILD_SHARED_LIBS=OFF ) -- The C compiler identification is GNU 9.3.0 -- Check for working C compiler: /tmp/instance-0/output-1/host/bin/sparc-linux-gcc -- Check for working C compiler: /tmp/instance-0/output-1/host/bin/sparc-linux-gcc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features -- Detecting C compile features - done -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: BUILD_DOC BUILD_DOCS BUILD_EXAMPLE BUILD_EXAMPLES BUILD_TEST BUILD_TESTING BUILD_TESTS -- Build files have been written to: /tmp/instance-0/output-1/build/utf8proc-2.6.1/buildroot-build >>> utf8proc 2.6.1 Building PATH="/tmp/instance-0/output-1/host/bin:/tmp/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" /usr/bin/make -j1 -C /tmp/instance-0/output-1/build/utf8proc-2.6.1//buildroot-build make[1]: Entering directory '/tmp/instance-0/output-1/build/utf8proc-2.6.1/buildroot-build' make[2]: Entering directory '/tmp/instance-0/output-1/build/utf8proc-2.6.1/buildroot-build' make[3]: Entering directory '/tmp/instance-0/output-1/build/utf8proc-2.6.1/buildroot-build' Scanning dependencies of target utf8proc make[3]: Leaving directory '/tmp/instance-0/output-1/build/utf8proc-2.6.1/buildroot-build' make[3]: Entering directory '/tmp/instance-0/output-1/build/utf8proc-2.6.1/buildroot-build' [ 50%] Building C object CMakeFiles/utf8proc.dir/utf8proc.c.o [100%] Linking C static library libutf8proc.a make[3]: Leaving directory '/tmp/instance-0/output-1/build/utf8proc-2.6.1/buildroot-build' [100%] Built target utf8proc make[2]: Leaving directory '/tmp/instance-0/output-1/build/utf8proc-2.6.1/buildroot-build' make[1]: Leaving directory '/tmp/instance-0/output-1/build/utf8proc-2.6.1/buildroot-build' >>> utf8proc 2.6.1 Installing to staging directory PATH="/tmp/instance-0/output-1/host/bin:/tmp/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" /usr/bin/make -j1 DESTDIR=/tmp/instance-0/output-1/host/sparc-buildroot-linux-uclibc/sysroot install/fast -C /tmp/instance-0/output-1/build/utf8proc-2.6.1//buildroot-build make[1]: Entering directory '/tmp/instance-0/output-1/build/utf8proc-2.6.1/buildroot-build' Install the project... -- Install configuration: "Release" -- Installing: /tmp/instance-0/output-1/host/sparc-buildroot-linux-uclibc/sysroot/usr/lib/libutf8proc.a -- Installing: /tmp/instance-0/output-1/host/sparc-buildroot-linux-uclibc/sysroot/usr/include/utf8proc.h make[1]: Leaving directory '/tmp/instance-0/output-1/build/utf8proc-2.6.1/buildroot-build' >>> utf8proc 2.6.1 Fixing libtool files for la in $(find /tmp/instance-0/output-1/host/sparc-buildroot-linux-uclibc/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /usr/bin/sed -i -e "s:/tmp/instance-0/output-1:@BASE_DIR@:g" \ -e "s:/tmp/instance-0/output-1/host/sparc-buildroot-linux-uclibc/sysroot:@STAGING_DIR@:g" \ -e "s:/tmp/instance-0/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/tmp/instance-0/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/tmp/instance-0/output-1/host/sparc-buildroot-linux-uclibc/sysroot:g" \ -e "s:@BASE_DIR@:/tmp/instance-0/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> utf8proc 2.6.1 Installing to target PATH="/tmp/instance-0/output-1/host/bin:/tmp/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" /usr/bin/make -j1 DESTDIR=/tmp/instance-0/output-1/target install/fast -C /tmp/instance-0/output-1/build/utf8proc-2.6.1//buildroot-build make[1]: Entering directory '/tmp/instance-0/output-1/build/utf8proc-2.6.1/buildroot-build' Install the project... -- Install configuration: "Release" -- Installing: /tmp/instance-0/output-1/target/usr/lib/libutf8proc.a -- Installing: /tmp/instance-0/output-1/target/usr/include/utf8proc.h make[1]: Leaving directory '/tmp/instance-0/output-1/build/utf8proc-2.6.1/buildroot-build' >>> Finalizing host directory >>> Finalizing target directory mkdir -p /tmp/instance-0/output-1/host/etc/meson sed -e 's%@TARGET_CROSS@%/tmp/instance-0/output-1/host/bin/sparc-linux-%g' -e 's%@TARGET_ARCH@%sparc%g' -e 's%@TARGET_CPU@%v8%g' -e 's%@TARGET_ENDIAN@%big%g' -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os', '-static'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%'-static'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os', '-static', '-static'@PKG_TARGET_CFLAGS@%g" -e 's%@HOST_DIR@%/tmp/instance-0/output-1/host%g' -e 's%@STAGING_DIR@%/tmp/instance-0/output-1/host/sparc-buildroot-linux-uclibc/sysroot%g' -e 's%@STATIC@%true%g' package/meson//cross-compilation.conf.in > /tmp/instance-0/output-1/host/etc/meson/cross-compilation.conf.in sed -e 's%@PKG_TARGET_CFLAGS@%%g' -e 's%@PKG_TARGET_LDFLAGS@%%g' -e 's%@PKG_TARGET_CXXFLAGS@%%g' /tmp/instance-0/output-1/host/etc/meson/cross-compilation.conf.in > /tmp/instance-0/output-1/host/etc/meson/cross-compilation.conf /usr/bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /tmp/instance-0/output-1/target/etc/inittab /usr/bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /tmp/instance-0/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /tmp/instance-0/output-1/build/busybox-1.33.1/.config; then grep -qsE '^/bin/ash$' /tmp/instance-0/output-1/target/etc/shells || echo "/bin/ash" >> /tmp/instance-0/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /tmp/instance-0/output-1/build/busybox-1.33.1/.config; then grep -qsE '^/bin/hush$' /tmp/instance-0/output-1/target/etc/shells || echo "/bin/hush" >> /tmp/instance-0/output-1/target/etc/shells; fi rm -f /tmp/instance-0/output-1/target/usr/share/glib-2.0/schemas/*.xml /tmp/instance-0/output-1/target/usr/share/glib-2.0/schemas/*.dtd /tmp/instance-0/output-1/host/bin/glib-compile-schemas /tmp/instance-0/output-1/host/sparc-buildroot-linux-uclibc/sysroot/usr/share/glib-2.0/schemas --targetdir=/tmp/instance-0/output-1/target/usr/share/glib-2.0/schemas No schema files found: doing nothing. mkdir -p /tmp/instance-0/output-1/target/etc echo "buildroot" > /tmp/instance-0/output-1/target/etc/hostname /usr/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /tmp/instance-0/output-1/target/etc/hosts mkdir -p /tmp/instance-0/output-1/target/etc echo "Welcome to Buildroot" > /tmp/instance-0/output-1/target/etc/issue /usr/bin/sed -i -e s,^root:[^:]*:,root::, /tmp/instance-0/output-1/target/etc/shadow rm -f /tmp/instance-0/output-1/target/bin/sh if [ -x /tmp/instance-0/output-1/target/sbin/swapon -a -x /tmp/instance-0/output-1/target/sbin/swapoff ]; then /usr/bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /tmp/instance-0/output-1/target/etc/inittab; else /usr/bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /tmp/instance-0/output-1/target/etc/inittab; fi printf '%s\n' C en_US locale-archive > /tmp/instance-0/output-1/build/locales.nopurge for dir in /tmp/instance-0/output-1/target/usr/share/locale /tmp/instance-0/output-1/target/usr/share/X11/locale /tmp/instance-0/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /tmp/instance-0/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /tmp/instance-0/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /tmp/instance-0/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /tmp/instance-0/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /tmp/instance-0/output-1/target/usr/include /tmp/instance-0/output-1/target/usr/share/aclocal \ /tmp/instance-0/output-1/target/usr/lib/pkgconfig /tmp/instance-0/output-1/target/usr/share/pkgconfig \ /tmp/instance-0/output-1/target/usr/lib/cmake /tmp/instance-0/output-1/target/usr/share/cmake \ /tmp/instance-0/output-1/target/usr/doc find /tmp/instance-0/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /tmp/instance-0/output-1/target/lib/ /tmp/instance-0/output-1/target/usr/lib/ /tmp/instance-0/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f rm -rf /tmp/instance-0/output-1/target/usr/share/gdb rm -rf /tmp/instance-0/output-1/target/usr/share/bash-completion rm -rf /tmp/instance-0/output-1/target/etc/bash_completion.d rm -rf /tmp/instance-0/output-1/target/usr/share/zsh rm -rf /tmp/instance-0/output-1/target/usr/man /tmp/instance-0/output-1/target/usr/share/man rm -rf /tmp/instance-0/output-1/target/usr/info /tmp/instance-0/output-1/target/usr/share/info rm -rf /tmp/instance-0/output-1/target/usr/doc /tmp/instance-0/output-1/target/usr/share/doc rm -rf /tmp/instance-0/output-1/target/usr/share/gtk-doc rmdir /tmp/instance-0/output-1/target/usr/share 2>/dev/null || true rm -rf /tmp/instance-0/output-1/target/lib/debug /tmp/instance-0/output-1/target/usr/lib/debug find /tmp/instance-0/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /tmp/instance-0/output-1/host/bin/sparc-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /tmp/instance-0/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /tmp/instance-0/output-1/host/bin/sparc-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /tmp/instance-0/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /tmp/instance-0/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /tmp/instance-0/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2021.02.3-212-g004a792dcf"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2021.02.4"; \ echo "PRETTY_NAME=\"Buildroot 2021.02.4\"" \ ) > /tmp/instance-0/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /tmp/instance-0/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/tmp/instance-0/output-1/per-package /tmp/instance-0/buildroot/support/scripts/fix-rpath target touch /tmp/instance-0/output-1/target/usr ln -snf /tmp/instance-0/output-1/host/sparc-buildroot-linux-uclibc/sysroot /tmp/instance-0/output-1/staging make: Leaving directory '/tmp/instance-0/buildroot' make: Entering directory '/tmp/instance-0/buildroot' >>> Buildroot 2021.02.3-212-g004a792dcf Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-bootlin 2020.08-1 Collecting legal info >>> toolchain Collecting legal info >>> aespipe 2.4f Collecting legal info >>> aoetools 37 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> bmon 4.0 Collecting legal info LICENSE.BSD: OK (sha256: 59ae3d59c672bfb955917a8e32f5cacba7f8ce716c499a4c63dc8cd8cb5c4991) LICENSE.MIT: OK (sha256: a2a6760c2c6fa779a635e4a7ad00f668862ebcadb2a8a57d16662543e103e08c) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> libconfuse 3.3 Collecting legal info LICENSE: OK (sha256: dc3ff4b62f851dd2e94a151061ffeb7d28ddfc880a442068dc5283dbaa927306) >>> libnl 3.5.0 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-bison 3.7.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> host-autoconf 2.69 Collecting legal info COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-gettext Collecting legal info >>> host-gettext-tiny 0.3.2 Collecting legal info LICENSE: OK (sha256: 4c938aa3d8fa3c184bba5e87a8a2febc89560627c9d0567536879e3eca1a7b4f) extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> ncurses 6.1 Collecting legal info COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87) >>> host-ncurses 6.1 Collecting legal info COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87) >>> busybox 1.33.1 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f) >>> util-linux 2.36.2 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> bzip2 1.0.8 Collecting legal info LICENSE: OK (sha256: c6dbbf828498be844a89eaa3b84adbab3199e342eb5cb2ed2f0d4ba7ec0f38a3) >>> cgic 2.07 Collecting legal info license.txt: OK (sha256: 6a7de92593d64dbf7630d8f66f97e04a899769bef1e055f2434bc06b87b9de62) >>> czmq 4.2.1 Collecting legal info LICENSE: OK (sha256: 1f256ecad192880510e84ad60474eab7589218784b9a50bc7ceee34c2b91f1d5) >>> zeromq 4.3.4 Collecting legal info COPYING: OK (sha256: 4fd86507c9b486764343065a9e035222869a27b5789efeb4fd93edc85412d7a3) COPYING.LESSER: OK (sha256: 83f32abe61ee58ffb1b007412c08415168c052501dbf56d7a47aaaac52b03ef6) >>> dnsmasq 2.85 Collecting legal info COPYING: OK (sha256: dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa) COPYING-v3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> fan-ctrl 1.3 Collecting legal info ERROR: No hash found for fan-ctrl.c >>> fping 5.0 Collecting legal info COPYING: OK (sha256: 6051b27e4b4a648f7bc8b329024da53a6e95ce88fcf0ccc259c371a74b741757) >>> fwup 1.8.0 Collecting legal info LICENSE: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) >>> libarchive 3.5.1 Collecting legal info COPYING: OK (sha256: b2cdf763345de2de34cebf54394df3c61a105c3b71288603c251f2fa638200ba) >>> lzo 2.10 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-cmake 3.15.5 Collecting legal info Copyright.txt: OK (sha256: dc628fb936a5d229296d42083f9a8218aa32204c016919e784404c9ec58776e9) >>> mbedtls 2.16.11 Collecting legal info apache-2.0.txt: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) >>> openssl Collecting legal info >>> libopenssl 1.1.1k Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> xz 5.2.5 Collecting legal info COPYING: OK (sha256: bcb02973ef6e87ea73d331b3a80df7748407f17efdb784b61b47e0e610d3bb5c) COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.GPLv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> glibmm 2.62.0 Collecting legal info COPYING: OK (sha256: 3ea7fa7c5d9a3a113e950eca9cfb85107f096270d8e4dd99daa9d8abdebc60e7) COPYING.tools: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> libglib2 2.66.8 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-libglib2 2.66.8 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-libffi 3.3 Collecting legal info LICENSE: OK (sha256: deaf3a42effb551a5b140fa9afefed183a27f1341c6d1bf430d106a5e6931fc0) >>> host-meson 0.56.2 Collecting legal info COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) >>> host-ninja 1.10.2 Collecting legal info COPYING: OK (sha256: eb7e9ab9690124c5c9f42bdc81383d886a3dede26345b6ed15bbad7caf81f7ea) >>> host-python3 3.9.6 Collecting legal info LICENSE: OK (sha256: 599826df92bfdcd2702eac691072498bb096c55af04ee984cf90f70ed77b5a70) >>> host-autoconf-archive 2019.01.06 Collecting legal info COPYING: OK (sha256: e6037104443f9a7829b2aa7c5370d0789a7bda3ca65a0b904cdc0c2e285d9195) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-expat 2.4.1 Collecting legal info COPYING: OK (sha256: 8c6b5b6de8fae20b317f4992729abc0e520bfba4c7606cd1e9eeb87418eebdec) >>> host-zlib Collecting legal info >>> host-libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> host-python3-setuptools 44.0.0 Collecting legal info LICENSE: OK (sha256: c32a3ac395af6321efd28be73d06a00f0db6ab887d1c21d4fec46128d2056d5a) >>> host-pcre 8.44 Collecting legal info LICENCE: OK (sha256: 0dd9c13864dbb9ee4d77a1557e96be29b2d719fb6584192ee36611aae264c4a3) >>> host-util-linux 2.36.2 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libffi 3.3 Collecting legal info LICENSE: OK (sha256: deaf3a42effb551a5b140fa9afefed183a27f1341c6d1bf430d106a5e6931fc0) >>> pcre 8.44 Collecting legal info LICENCE: OK (sha256: 0dd9c13864dbb9ee4d77a1557e96be29b2d719fb6584192ee36611aae264c4a3) >>> libsigc 2.10.0 Collecting legal info COPYING: OK (sha256: 5bbcbb737e60fe9deba08ecbd00920cfcc3403ba2e534c64fdeea49d6bb87509) >>> igd2-for-linux 2.1 Collecting legal info linuxigd2/doc/LICENSE: OK (sha256: 204d8eff92f95aac4df6c8122bc1505f468f3a901e5a4cc08940e0ede1938994) linuxigd2/src/threadutil/COPYING: OK (sha256: c8b99423cad48bb44e2cf52a496361404290865eac259a82da6d1e4331ececb3) >>> libupnp 1.14.6 Collecting legal info COPYING: OK (sha256: c8b99423cad48bb44e2cf52a496361404290865eac259a82da6d1e4331ececb3) >>> initscripts Collecting legal info >>> iptables 1.8.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> libcsv 3.0.3 Collecting legal info COPYING.LESSER: OK (sha256: 6876b170378d38f65aadd271485f0a5c45beaa043a7d3de5e1636ec927922c83) >>> libcurl 7.78.0 Collecting legal info COPYING: OK (sha256: 6fd1a1c008b5ef4c4741dd188c3f8af6944c14c25afa881eb064f98fb98358e7) >>> libevent 2.1.12 Collecting legal info LICENSE: OK (sha256: ff02effc9b331edcdac387d198691bfa3e575e7d244ad10cb826aa51ef085670) >>> libgta 1.0.8 Collecting legal info COPYING: OK (sha256: 36b6d3fa47916943fd5fec313c584784946047ec1337a78b440e5992cb595f89) >>> libmemcached 1.0.18 Collecting legal info COPYING: OK (sha256: 4e9032d0f539276db05519ee3d09ca6167d2134ec91c556e8c80ef3efe633fd2) >>> libmpeg2 0.5.1 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> sdl 1.2.15 Collecting legal info COPYING: OK (sha256: bb117c0fbd7f57f64170b690285d7df07c2371b578e3b3cd3aa2e1155ef461a0) >>> libsocketcan 0.0.12 Collecting legal info LICENSE: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> lrzip 7f3bf46203bf45ea115d8bd9f310ea219be88af4 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> memcached 1.6.9 Collecting legal info COPYING: OK (sha256: bc887c4ad8051fe690ace9528fe37a2e0bb362e6d963331d82e845ca9b585a0c) >>> opencore-amr 0.1.5 Collecting legal info LICENSE: OK (sha256: 8b3f1762349248d444ab9acbafe73941254e36e1064954da56bb9ddbd5873ddb) >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> prboom 2.5.0 Collecting legal info COPYING: OK (sha256: 1cba07ce0f6d1366d84b7cc62b76966ba79075e5f379c1e230c3ff0635fa789f) >>> sdl_mixer 1.2.12 Collecting legal info COPYING: OK (sha256: bc4c3bc32b311044d81c32b5e5402a6bc971a3b235850bb63445ec14bb6fe59e) >>> sdl_net 1.2.8 Collecting legal info COPYING: OK (sha256: e542f822a6cd82deccf82cf0f50192917b0158d725a6bc6348ab1ccdd890ecbe) >>> pure-ftpd 1.0.49 Collecting legal info COPYING: OK (sha256: 3a9e94382a69d04aa434d69b20ff2c01dbbfcb7191f05f69a7109c0ee1559c19) >>> rcw-smarc-sal28 10 Collecting legal info COPYING: OK (sha256: 803c65088eed36a6697ca9f03f4379bbad24e276dc8da7fef5eb4dc4008415a1) >>> sound-theme-borealis 0.9a Collecting legal info >>> sp-oops-extract 0.0.7-1 Collecting legal info COPYING: OK (sha256: c38aee9e3c8c4d5d594ff548a1be05453023016d6286931f6512db215ec1fd42) >>> sysstat 12.4.2 Collecting legal info COPYING: OK (sha256: db296f2f7f35bca3a174efb0eb392b3b17bd94b341851429a3dff411b1c2fc73) >>> transmission 3.00 Collecting legal info COPYING: OK (sha256: 2b16da5bd02790d1e4d332cfd42b9dfd7d1b0ed3a16a75dc7e76b6ed239fdba9) >>> host-intltool 0.51.0 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> host-libxml-parser-perl 2.46 Collecting legal info README: OK (sha256: 6a2e768443ed00f09d3d4bc4dd14451035eac13c6864d68d8e2f76edf5a044f2) >>> umtprd 1.3.10 Collecting legal info LICENSE: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> urg 0.8.18 Collecting legal info COPYING: OK (sha256: 9ccf26cfe845e0eb8bb58053e47366e7ab6b697ae010f7650978d4b71b7d1fc1) >>> utf8proc 2.6.1 Collecting legal info LICENSE.md: OK (sha256: fbc720fcc90fb44396985646f67e4d19be03e0c0539f7138ed9dc6efba49dc49) WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-bootlin-2020.08-1: cannot save license (TOOLCHAIN_EXTERNAL_BOOTLIN_LICENSE_FILES not defined) WARNING: aespipe-2.4f: cannot save license (AESPIPE_LICENSE_FILES not defined) WARNING: sound-theme-borealis-0.9a: cannot save license (SOUND_THEME_BOREALIS_LICENSE_FILES not defined) Legal info produced in /tmp/instance-0/output-1/legal-info make: Leaving directory '/tmp/instance-0/buildroot'