This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by Mesa configure 17.2.4, which was generated by GNU Autoconf 2.69. Invocation command line was $ ./configure --target=powerpc-buildroot-linux-gnuspe --host=powerpc-buildroot-linux-gnuspe --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix= --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared --disable-asm --disable-glx --disable-xa --enable-shared-glapi --with-gallium-drivers=swrast --enable-gallium-extra-hud --without-dri-drivers --disable-dri3 --without-vulkan-drivers --disable-osmesa --enable-opengl --enable-dri --disable-va --with-platforms=wayland --disable-egl --enable-gles1 --enable-gles2 --disable-texture-float --disable-xvmc --disable-libunwind --disable-vdpau --disable-lmsensors --with-llvm-prefix=/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/bin ## --------- ## ## Platform. ## ## --------- ## hostname = build uname -m = x86_64 uname -r = 4.4.0-101-generic uname -s = Linux uname -v = #124-Ubuntu SMP Fri Nov 10 18:29:59 UTC 2017 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /home/test/autobuild/run/instance-1/output/host/bin PATH: /home/test/autobuild/run/instance-1/output/host/sbin PATH: /usr/local/bin PATH: /usr/bin PATH: /bin PATH: /usr/local/games PATH: /usr/games ## ----------- ## ## Core tests. ## ## ----------- ## configure:3344: checking build system type configure:3358: result: x86_64-pc-linux-gnu configure:3378: checking host system type configure:3391: result: powerpc-buildroot-linux-gnuspe configure:3411: checking target system type configure:3424: result: powerpc-buildroot-linux-gnuspe configure:3467: checking for a BSD-compatible install configure:3535: result: /usr/bin/install -c configure:3546: checking whether build environment is sane configure:3601: result: yes configure:3660: checking for powerpc-buildroot-linux-gnuspe-strip configure:3687: result: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-strip configure:3752: checking for a thread-safe mkdir -p configure:3791: result: /bin/mkdir -p configure:3798: checking for gawk configure:3828: result: no configure:3798: checking for mawk configure:3814: found /usr/bin/mawk configure:3825: result: mawk configure:3836: checking whether make sets $(MAKE) configure:3858: result: yes configure:3887: checking whether make supports nested variables configure:3904: result: yes configure:3993: checking whether UID '1003' is supported by ustar format configure:3996: result: yes configure:4003: checking whether GID '1002' is supported by ustar format configure:4006: result: yes configure:4014: checking how to create a ustar tar archive configure:4025: tar --version tar (GNU tar) 1.26 Copyright (C) 2011 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later . This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Written by John Gilmore and Jay Fenlason. configure:4028: $? = 0 configure:4068: tardir=conftest.dir && eval tar --format=ustar -chf - "$tardir" >conftest.tar configure:4071: $? = 0 configure:4075: tar -xf - &5 powerpc-ctng_e500v2-linux-gnuspe-gcc (crosstool-NG hg+-c65fcf8a34b7) 4.7.3 Copyright (C) 2012 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:4583: $? = 0 configure:4572: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -v >&5 Using built-in specs. COLLECT_GCC=/home/test/autobuild/run/instance-1/output/host/opt/ext-toolchain/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc COLLECT_LTO_WRAPPER=/home/test/autobuild/run/instance-1/output/host/opt/ext-toolchain/bin/../libexec/gcc/powerpc-ctng_e500v2-linux-gnuspe/4.7.3/lto-wrapper Target: powerpc-ctng_e500v2-linux-gnuspe Configured with: /home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/src/gcc-4.7.3/configure --build=i686-build_pc-linux-gnu --host=i686-build_pc-linux-gnu --target=powerpc-ctng_e500v2-linux-gnuspe --prefix=/opt/toolchains/powerpc-ctng_e500v2-linux-gnuspe --with-sysroot=/opt/toolchains/powerpc-ctng_e500v2-linux-gnuspe/powerpc-ctng_e500v2-linux-gnuspe/sysroot --enable-languages=c,c++ --with-cpu=8548 --with-tune=8548 --with-float=hard --with-pkgversion='crosstool-NG hg+-c65fcf8a34b7' --disable-sjlj-exceptions --enable-__cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --disable-libquadmath --disable-libquadmath-support --with-gmp=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-mpfr=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-mpc=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-ppl=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-cloog=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-libelf=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm -L/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools/lib -lpwl' --enable-threads=posix --with-long-double-128 --disable-nls --disable-multilib --with-local-prefix=/opt/toolchains/powerpc-ctng_e500v2-linux-gnuspe/powerpc-ctng_e500v2-linux-gnuspe/sysroot --enable-c99 --enable-long-long --enable-e500_double Thread model: posix gcc version 4.7.3 (crosstool-NG hg+-c65fcf8a34b7) configure:4583: $? = 0 configure:4572: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -V >&5 powerpc-ctng_e500v2-linux-gnuspe-gcc: error: unrecognized command line option '-V' powerpc-ctng_e500v2-linux-gnuspe-gcc: fatal error: no input files compilation terminated. configure:4583: $? = 1 configure:4572: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -qversion >&5 powerpc-ctng_e500v2-linux-gnuspe-gcc: error: unrecognized command line option '-qversion' powerpc-ctng_e500v2-linux-gnuspe-gcc: fatal error: no input files compilation terminated. configure:4583: $? = 1 configure:4603: checking whether the C compiler works configure:4625: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:4629: $? = 0 configure:4677: result: yes configure:4680: checking for C compiler default output file name configure:4682: result: a.out configure:4688: checking for suffix of executables configure:4695: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:4699: $? = 0 configure:4721: result: configure:4743: checking whether we are cross compiling configure:4781: result: yes configure:4786: checking for suffix of object files configure:4808: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:4812: $? = 0 configure:4833: result: o configure:4837: checking whether we are using the GNU C compiler configure:4856: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:4856: $? = 0 configure:4865: result: yes configure:4874: checking whether /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -g configure:4894: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -g -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:4894: $? = 0 configure:4935: result: yes configure:4952: checking for /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc option to accept ISO C89 configure:5015: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:5015: $? = 0 configure:5028: result: none needed configure:5053: checking whether /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc understands -c and -o together configure:5075: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c conftest.c -o conftest2.o configure:5078: $? = 0 configure:5075: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c conftest.c -o conftest2.o configure:5078: $? = 0 configure:5090: result: yes configure:5109: checking dependency style of /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc configure:5220: result: none configure:5241: checking for powerpc-buildroot-linux-gnuspe-ar configure:5268: result: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ar configure:5338: checking the archiver (/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ar) interface configure:5354: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:5354: $? = 0 configure:5356: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ar cru libconftest.a conftest.o >&5 configure:5359: $? = 0 configure:5387: result: ar configure:5457: checking how to run the C preprocessor configure:5527: result: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-cpp configure:5547: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c configure:5547: $? = 0 configure:5561: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c conftest.c:11:28: fatal error: ac_nonexistent.h: No such file or directory compilation terminated. configure:5561: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | /* end confdefs.h. */ | #include configure:5597: checking for powerpc-buildroot-linux-gnuspe-gcc configure:5624: result: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc configure:5893: checking for C compiler version configure:5902: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc --version >&5 powerpc-ctng_e500v2-linux-gnuspe-gcc (crosstool-NG hg+-c65fcf8a34b7) 4.7.3 Copyright (C) 2012 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:5913: $? = 0 configure:5902: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -v >&5 Using built-in specs. COLLECT_GCC=/home/test/autobuild/run/instance-1/output/host/opt/ext-toolchain/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc COLLECT_LTO_WRAPPER=/home/test/autobuild/run/instance-1/output/host/opt/ext-toolchain/bin/../libexec/gcc/powerpc-ctng_e500v2-linux-gnuspe/4.7.3/lto-wrapper Target: powerpc-ctng_e500v2-linux-gnuspe Configured with: /home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/src/gcc-4.7.3/configure --build=i686-build_pc-linux-gnu --host=i686-build_pc-linux-gnu --target=powerpc-ctng_e500v2-linux-gnuspe --prefix=/opt/toolchains/powerpc-ctng_e500v2-linux-gnuspe --with-sysroot=/opt/toolchains/powerpc-ctng_e500v2-linux-gnuspe/powerpc-ctng_e500v2-linux-gnuspe/sysroot --enable-languages=c,c++ --with-cpu=8548 --with-tune=8548 --with-float=hard --with-pkgversion='crosstool-NG hg+-c65fcf8a34b7' --disable-sjlj-exceptions --enable-__cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --disable-libquadmath --disable-libquadmath-support --with-gmp=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-mpfr=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-mpc=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-ppl=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-cloog=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-libelf=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm -L/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools/lib -lpwl' --enable-threads=posix --with-long-double-128 --disable-nls --disable-multilib --with-local-prefix=/opt/toolchains/powerpc-ctng_e500v2-linux-gnuspe/powerpc-ctng_e500v2-linux-gnuspe/sysroot --enable-c99 --enable-long-long --enable-e500_double Thread model: posix gcc version 4.7.3 (crosstool-NG hg+-c65fcf8a34b7) configure:5913: $? = 0 configure:5902: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -V >&5 powerpc-ctng_e500v2-linux-gnuspe-gcc: error: unrecognized command line option '-V' powerpc-ctng_e500v2-linux-gnuspe-gcc: fatal error: no input files compilation terminated. configure:5913: $? = 1 configure:5902: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -qversion >&5 powerpc-ctng_e500v2-linux-gnuspe-gcc: error: unrecognized command line option '-qversion' powerpc-ctng_e500v2-linux-gnuspe-gcc: fatal error: no input files compilation terminated. configure:5913: $? = 1 configure:5917: checking whether we are using the GNU C compiler configure:5945: result: yes configure:5954: checking whether /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -g configure:6015: result: yes configure:6032: checking for /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc option to accept ISO C89 configure:6108: result: none needed configure:6133: checking whether /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc understands -c and -o together configure:6170: result: yes configure:6189: checking dependency style of /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc configure:6300: result: none configure:6427: checking for C++ compiler version configure:6436: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ --version >&5 powerpc-ctng_e500v2-linux-gnuspe-g++ (crosstool-NG hg+-c65fcf8a34b7) 4.7.3 Copyright (C) 2012 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:6447: $? = 0 configure:6436: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -v >&5 Using built-in specs. COLLECT_GCC=/home/test/autobuild/run/instance-1/output/host/opt/ext-toolchain/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ COLLECT_LTO_WRAPPER=/home/test/autobuild/run/instance-1/output/host/opt/ext-toolchain/bin/../libexec/gcc/powerpc-ctng_e500v2-linux-gnuspe/4.7.3/lto-wrapper Target: powerpc-ctng_e500v2-linux-gnuspe Configured with: /home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/src/gcc-4.7.3/configure --build=i686-build_pc-linux-gnu --host=i686-build_pc-linux-gnu --target=powerpc-ctng_e500v2-linux-gnuspe --prefix=/opt/toolchains/powerpc-ctng_e500v2-linux-gnuspe --with-sysroot=/opt/toolchains/powerpc-ctng_e500v2-linux-gnuspe/powerpc-ctng_e500v2-linux-gnuspe/sysroot --enable-languages=c,c++ --with-cpu=8548 --with-tune=8548 --with-float=hard --with-pkgversion='crosstool-NG hg+-c65fcf8a34b7' --disable-sjlj-exceptions --enable-__cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --disable-libquadmath --disable-libquadmath-support --with-gmp=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-mpfr=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-mpc=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-ppl=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-cloog=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-libelf=/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm -L/home/ymorin/dev/crosstool-NG/buildroot-toolchains/ct-ng/.build/powerpc-ctng_e500v2-linux-gnuspe/buildtools/lib -lpwl' --enable-threads=posix --with-long-double-128 --disable-nls --disable-multilib --with-local-prefix=/opt/toolchains/powerpc-ctng_e500v2-linux-gnuspe/powerpc-ctng_e500v2-linux-gnuspe/sysroot --enable-c99 --enable-long-long --enable-e500_double Thread model: posix gcc version 4.7.3 (crosstool-NG hg+-c65fcf8a34b7) configure:6447: $? = 0 configure:6436: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -V >&5 powerpc-ctng_e500v2-linux-gnuspe-g++: error: unrecognized command line option '-V' powerpc-ctng_e500v2-linux-gnuspe-g++: fatal error: no input files compilation terminated. configure:6447: $? = 1 configure:6436: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -qversion >&5 powerpc-ctng_e500v2-linux-gnuspe-g++: error: unrecognized command line option '-qversion' powerpc-ctng_e500v2-linux-gnuspe-g++: fatal error: no input files compilation terminated. configure:6447: $? = 1 configure:6451: checking whether we are using the GNU C++ compiler configure:6470: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.cpp >&5 configure:6470: $? = 0 configure:6479: result: yes configure:6488: checking whether /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ accepts -g configure:6508: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -c -g -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.cpp >&5 configure:6508: $? = 0 configure:6549: result: yes configure:6574: checking dependency style of /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ configure:6685: result: none configure:6710: checking dependency style of /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc configure:6819: result: none configure:6834: checking for GNU make configure:6849: result: make configure:6864: checking for python2.7 configure:6880: found /home/test/autobuild/run/instance-1/output/host/bin/python2.7 configure:6891: result: python2.7 configure:6902: checking for a sed that does not truncate output configure:6966: result: /bin/sed configure:6980: checking for special C compiler options needed for large files configure:7025: result: no configure:7031: checking for _FILE_OFFSET_BITS value needed for large files configure:7056: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:7056: $? = 0 configure:7088: result: no configure:7221: checking how to print strings configure:7248: result: printf configure:7269: checking for a sed that does not truncate output configure:7333: result: /bin/sed configure:7351: checking for grep that handles long lines and -e configure:7409: result: /bin/grep configure:7414: checking for egrep configure:7476: result: /bin/grep -E configure:7481: checking for fgrep configure:7543: result: /bin/grep -F configure:7578: checking for ld used by /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc configure:7645: result: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ld configure:7652: checking if the linker (/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ld) is GNU ld configure:7667: result: yes configure:7679: checking for BSD- or MS-compatible name lister (nm) configure:7733: result: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-nm configure:7863: checking the name lister (/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-nm) interface configure:7870: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:7873: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-nm "conftest.o" configure:7876: output 00000000 S some_variable configure:7883: result: BSD nm configure:7886: checking whether ln -s works configure:7890: result: yes configure:7898: checking the maximum length of command line arguments configure:8029: result: 3458764513820540925 configure:8077: checking how to convert x86_64-pc-linux-gnu file names to powerpc-buildroot-linux-gnuspe format configure:8117: result: func_convert_file_noop configure:8124: checking how to convert x86_64-pc-linux-gnu file names to toolchain format configure:8144: result: func_convert_file_noop configure:8151: checking for /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ld option to reload object files configure:8158: result: -r configure:8192: checking for powerpc-buildroot-linux-gnuspe-objdump configure:8219: result: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-objdump configure:8291: checking how to recognize dependent libraries configure:8491: result: pass_all configure:8536: checking for powerpc-buildroot-linux-gnuspe-dlltool configure:8566: result: no configure:8576: checking for dlltool configure:8606: result: no configure:8636: checking how to associate runtime and link libraries configure:8663: result: printf %s\n configure:8679: checking for powerpc-buildroot-linux-gnuspe-ar configure:8706: result: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ar configure:8787: checking for archiver @FILE support configure:8804: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:8804: $? = 0 configure:8807: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ar cru libconftest.a @conftest.lst >&5 configure:8810: $? = 0 configure:8815: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ar cru libconftest.a @conftest.lst >&5 /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ar: conftest.o: No such file or directory configure:8818: $? = 1 configure:8830: result: @ configure:8848: checking for powerpc-buildroot-linux-gnuspe-strip configure:8875: result: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-strip configure:8947: checking for powerpc-buildroot-linux-gnuspe-ranlib configure:8974: result: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ranlib configure:9116: checking command to parse /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-nm output from /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc object configure:9269: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:9272: $? = 0 configure:9276: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-nm conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' \> conftest.nm configure:9279: $? = 0 configure:9345: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c conftstm.o >&5 configure:9348: $? = 0 configure:9386: result: ok configure:9433: checking for sysroot configure:9463: result: no configure:9470: checking for a working dd configure:9508: result: /bin/dd configure:9512: checking how to truncate binary pipes configure:9527: result: /bin/dd bs=4096 count=1 configure:9663: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:9666: $? = 0 configure:9816: checking for powerpc-buildroot-linux-gnuspe-mt configure:9846: result: no configure:9856: checking for mt configure:9872: found /bin/mt configure:9883: result: mt configure:9895: WARNING: using cross tools not prefixed with host triplet configure:9906: checking if mt is a manifest tool configure:9912: mt '-?' configure:9920: result: no configure:10593: checking for ANSI C header files configure:10613: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:10613: $? = 0 configure:10697: result: yes configure:10710: checking for sys/types.h configure:10710: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:10710: $? = 0 configure:10710: result: yes configure:10710: checking for sys/stat.h configure:10710: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:10710: $? = 0 configure:10710: result: yes configure:10710: checking for stdlib.h configure:10710: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:10710: $? = 0 configure:10710: result: yes configure:10710: checking for string.h configure:10710: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:10710: $? = 0 configure:10710: result: yes configure:10710: checking for memory.h configure:10710: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:10710: $? = 0 configure:10710: result: yes configure:10710: checking for strings.h configure:10710: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:10710: $? = 0 configure:10710: result: yes configure:10710: checking for inttypes.h configure:10710: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:10710: $? = 0 configure:10710: result: yes configure:10710: checking for stdint.h configure:10710: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:10710: $? = 0 configure:10710: result: yes configure:10710: checking for unistd.h configure:10710: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:10710: $? = 0 configure:10710: result: yes configure:10724: checking for dlfcn.h configure:10724: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:10724: $? = 0 configure:10724: result: yes configure:10990: checking for objdir configure:11005: result: .libs configure:11265: checking if /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc supports -fno-rtti -fno-exceptions configure:11283: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -fno-rtti -fno-exceptions conftest.c >&5 cc1: warning: command line option '-fno-rtti' is valid for C++/ObjC++ but not for C [enabled by default] configure:11287: $? = 0 configure:11300: result: no configure:11658: checking for /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc option to produce PIC configure:11665: result: -fPIC -DPIC configure:11673: checking if /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc PIC flag -fPIC -DPIC works configure:11691: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -fPIC -DPIC -DPIC conftest.c >&5 configure:11695: $? = 0 configure:11708: result: yes configure:11737: checking if /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc static flag -static works configure:11765: result: yes configure:11780: checking if /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc supports -c -o file.o configure:11801: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o out/conftest2.o conftest.c >&5 configure:11805: $? = 0 configure:11827: result: yes configure:11835: checking if /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc supports -c -o file.o configure:11882: result: yes configure:11915: checking whether the /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc linker (/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ld) supports shared libraries configure:13174: result: yes configure:13211: checking whether -lc should be explicitly linked in configure:13219: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:13222: $? = 0 configure:13237: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -shared -fPIC -DPIC conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| /bin/grep -lc \>/dev/null 2\>\&1 configure:13240: $? = 0 configure:13254: result: no configure:13414: checking dynamic linker characteristics configure:13995: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-rpath -Wl,/foo conftest.c >&5 configure:13995: $? = 0 configure:14232: result: GNU/Linux ld.so configure:14354: checking how to hardcode library paths into programs configure:14379: result: immediate configure:14927: checking whether stripping libraries is possible configure:14932: result: yes configure:14967: checking if libtool supports shared libraries configure:14969: result: yes configure:14972: checking whether to build shared libraries configure:14997: result: yes configure:15000: checking whether to build static libraries configure:15004: result: no configure:15027: checking how to run the C++ preprocessor configure:15054: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -E -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.cpp configure:15054: $? = 0 configure:15068: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -E -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.cpp conftest.cpp:23:28: fatal error: ac_nonexistent.h: No such file or directory compilation terminated. configure:15068: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | #include configure:15093: result: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -E configure:15113: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -E -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.cpp configure:15113: $? = 0 configure:15127: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -E -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.cpp conftest.cpp:23:28: fatal error: ac_nonexistent.h: No such file or directory compilation terminated. configure:15127: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | #include configure:15289: checking for ld used by /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ configure:15356: result: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ld configure:15363: checking if the linker (/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ld) is GNU ld configure:15378: result: yes configure:15433: checking whether the /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ linker (/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ld) supports shared libraries configure:16506: result: yes configure:16542: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.cpp >&5 configure:16545: $? = 0 configure:17026: checking for /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ option to produce PIC configure:17033: result: -fPIC -DPIC configure:17041: checking if /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ PIC flag -fPIC -DPIC works configure:17059: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -fPIC -DPIC -DPIC conftest.cpp >&5 configure:17063: $? = 0 configure:17076: result: yes configure:17099: checking if /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ static flag -static works configure:17127: result: yes configure:17139: checking if /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports -c -o file.o configure:17160: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o out/conftest2.o conftest.cpp >&5 configure:17164: $? = 0 configure:17186: result: yes configure:17191: checking if /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports -c -o file.o configure:17238: result: yes configure:17268: checking whether the /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ linker (/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ld) supports shared libraries configure:17308: result: yes configure:17449: checking dynamic linker characteristics configure:18194: result: GNU/Linux ld.so configure:18259: checking how to hardcode library paths into programs configure:18284: result: immediate configure:18348: checking for rm configure:18375: result: rm -f configure:18388: checking for bison configure:18404: found /home/test/autobuild/run/instance-1/output/host/bin/bison configure:18415: result: bison -y configure:18431: checking if bison is the parser generator configure:18444: result: yes configure:18461: checking for flex configure:18477: found /home/test/autobuild/run/instance-1/output/host/bin/flex configure:18488: result: flex configure:18526: flex conftest.l configure:18530: $? = 0 configure:18532: checking lex output file root configure:18546: result: lex.yy configure:18551: checking lex library configure:18565: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 /tmp/ccimfzKC.o: In function `yylex': conftest.c:(.text+0xbfc): undefined reference to `yywrap' conftest.c:(.text+0xe74): undefined reference to `yywrap' /tmp/ccimfzKC.o: In function `main': conftest.c:(.text.startup+0x1c): undefined reference to `yywrap' collect2: error: ld returned 1 exit status configure:18565: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | #line 2 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 6 | #define YY_FLEX_SUBMINOR_VERSION 4 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #ifndef SIZE_MAX | #define SIZE_MAX (~(size_t)0) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | /* begin standard C++ headers. */ | | /* TODO: this is always defined, so inline it */ | #define yyconst const | | #if defined(__GNUC__) && __GNUC__ >= 3 | #define yynoreturn __attribute__((__noreturn__)) | #else | #define yynoreturn | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an | * integer in range [0..255] for use as an array index. | */ | #define YY_SC_TO_UI(c) ((YY_CHAR) (c)) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart( yyin ) | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k. | * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. | * Ditto for the __ia64__ case accordingly. | */ | #define YY_BUF_SIZE 32768 | #else | #define YY_BUF_SIZE 16384 | #endif /* __ia64__ */ | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern int yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | #define YY_LINENO_REWIND_TO(ptr) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | int yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = NULL; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart ( FILE *input_file ); | void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size ); | void yy_delete_buffer ( YY_BUFFER_STATE b ); | void yy_flush_buffer ( YY_BUFFER_STATE b ); | void yypush_buffer_state ( YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state ( void ); | | static void yyensure_buffer_stack ( void ); | static void yy_load_buffer_state ( void ); | static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file ); | #define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size ); | YY_BUFFER_STATE yy_scan_string ( const char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, int len ); | | void *yyalloc ( yy_size_t ); | void *yyrealloc ( void *, yy_size_t ); | void yyfree ( void * ); | | #define yy_new_buffer yy_create_buffer | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | typedef flex_uint8_t YY_CHAR; | | FILE *yyin = NULL, *yyout = NULL; | | typedef int yy_state_type; | | extern int yylineno; | int yylineno = 1; | | extern char *yytext; | #ifdef yytext_ptr | #undef yytext_ptr | #endif | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state ( void ); | static yy_state_type yy_try_NUL_trans ( yy_state_type current_state ); | static int yy_get_next_buffer ( void ); | static void yynoreturn yy_fatal_error ( const char* msg ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (int) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static const flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static const flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static const YY_CHAR yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static const YY_CHAR yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static const flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static const flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static const flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static const flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 459 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals ( void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy ( void ); | | int yyget_debug ( void ); | | void yyset_debug ( int debug_flag ); | | YY_EXTRA_TYPE yyget_extra ( void ); | | void yyset_extra ( YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in ( void ); | | void yyset_in ( FILE * _in_str ); | | FILE *yyget_out ( void ); | | void yyset_out ( FILE * _out_str ); | | int yyget_leng ( void ); | | char *yyget_text ( void ); | | int yyget_lineno ( void ); | | void yyset_lineno ( int _line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap ( void ); | #else | extern int yywrap ( void ); | #endif | #endif | | #ifndef YY_NO_UNPUT | | static void yyunput ( int c, char *buf_ptr ); | | #endif | | #ifndef yytext_ptr | static void yy_flex_strncpy ( char *, const char *, int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen ( const char * ); | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput ( void ); | #else | static int input ( void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k */ | #define YY_READ_BUF_SIZE 16384 | #else | #define YY_READ_BUF_SIZE 8192 | #endif /* __ia64__ */ | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | int n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = (int) fread(buf, 1, (yy_size_t) max_size, yyin)) == 0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK /*LINTED*/break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | yy_state_type yy_current_state; | char *yy_cp, *yy_bp; | int yy_act; | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | { | #line 1 "conftest.l" | | #line 684 "lex.yy.c" | | while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (int) ((yy_c_buf_p) - (yytext_ptr)); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | | find_rule: /* we branch to this label when backing up */ | | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 793 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of user's declarations */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | char *source = (yytext_ptr); | int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1); | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | int num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart( yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc( | (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | /* "- 2" to take care of EOB's */ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | yy_state_type yy_current_state; | char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | int yy_is_jam; | | YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | #ifndef YY_NO_UNPUT | | static void yyunput (int c, char * yy_bp ) | { | char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | int number_to_move = (yy_n_chars) + 2; | char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | int offset = (int) ((yy_c_buf_p) - (yytext_ptr)); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart( yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return 0; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_init_buffer( YY_CURRENT_BUFFER, input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer( b, file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree( (void *) b->yy_ch_buf ); | | yyfree( (void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer( b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | yy_size_t grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return NULL; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = NULL; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer( b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (const char * yystr ) | { | | return yy_scan_bytes( yystr, (int) strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (const char * yybytes, int _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = (yy_size_t) (_yybytes_len + 2); | buf = (char *) yyalloc( n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer( buf, n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yynoreturn yy_fatal_error (const char* msg ) | { | fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | int yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param _line_number line number | * | */ | void yyset_lineno (int _line_number ) | { | | yylineno = _line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param _in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * _in_str ) | { | yyin = _in_str ; | } | | void yyset_out (FILE * _out_str ) | { | yyout = _out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int _bdebug ) | { | yy_flex_debug = _bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = NULL; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = NULL; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = NULL; | yyout = NULL; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer( YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, const char * s2, int n ) | { | | int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (const char * s ) | { | int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return malloc(size); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return realloc(ptr, size); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:18565: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -lfl >&5 /home/test/autobuild/run/instance-1/output/host/opt/ext-toolchain/bin/../lib/gcc/powerpc-ctng_e500v2-linux-gnuspe/4.7.3/../../../../powerpc-ctng_e500v2-linux-gnuspe/bin/ld: cannot find -lfl collect2: error: ld returned 1 exit status configure:18565: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | #line 2 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 6 | #define YY_FLEX_SUBMINOR_VERSION 4 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #ifndef SIZE_MAX | #define SIZE_MAX (~(size_t)0) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | /* begin standard C++ headers. */ | | /* TODO: this is always defined, so inline it */ | #define yyconst const | | #if defined(__GNUC__) && __GNUC__ >= 3 | #define yynoreturn __attribute__((__noreturn__)) | #else | #define yynoreturn | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an | * integer in range [0..255] for use as an array index. | */ | #define YY_SC_TO_UI(c) ((YY_CHAR) (c)) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart( yyin ) | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k. | * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. | * Ditto for the __ia64__ case accordingly. | */ | #define YY_BUF_SIZE 32768 | #else | #define YY_BUF_SIZE 16384 | #endif /* __ia64__ */ | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern int yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | #define YY_LINENO_REWIND_TO(ptr) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | int yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = NULL; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart ( FILE *input_file ); | void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size ); | void yy_delete_buffer ( YY_BUFFER_STATE b ); | void yy_flush_buffer ( YY_BUFFER_STATE b ); | void yypush_buffer_state ( YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state ( void ); | | static void yyensure_buffer_stack ( void ); | static void yy_load_buffer_state ( void ); | static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file ); | #define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size ); | YY_BUFFER_STATE yy_scan_string ( const char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, int len ); | | void *yyalloc ( yy_size_t ); | void *yyrealloc ( void *, yy_size_t ); | void yyfree ( void * ); | | #define yy_new_buffer yy_create_buffer | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | typedef flex_uint8_t YY_CHAR; | | FILE *yyin = NULL, *yyout = NULL; | | typedef int yy_state_type; | | extern int yylineno; | int yylineno = 1; | | extern char *yytext; | #ifdef yytext_ptr | #undef yytext_ptr | #endif | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state ( void ); | static yy_state_type yy_try_NUL_trans ( yy_state_type current_state ); | static int yy_get_next_buffer ( void ); | static void yynoreturn yy_fatal_error ( const char* msg ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (int) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static const flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static const flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static const YY_CHAR yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static const YY_CHAR yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static const flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static const flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static const flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static const flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 459 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals ( void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy ( void ); | | int yyget_debug ( void ); | | void yyset_debug ( int debug_flag ); | | YY_EXTRA_TYPE yyget_extra ( void ); | | void yyset_extra ( YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in ( void ); | | void yyset_in ( FILE * _in_str ); | | FILE *yyget_out ( void ); | | void yyset_out ( FILE * _out_str ); | | int yyget_leng ( void ); | | char *yyget_text ( void ); | | int yyget_lineno ( void ); | | void yyset_lineno ( int _line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap ( void ); | #else | extern int yywrap ( void ); | #endif | #endif | | #ifndef YY_NO_UNPUT | | static void yyunput ( int c, char *buf_ptr ); | | #endif | | #ifndef yytext_ptr | static void yy_flex_strncpy ( char *, const char *, int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen ( const char * ); | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput ( void ); | #else | static int input ( void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k */ | #define YY_READ_BUF_SIZE 16384 | #else | #define YY_READ_BUF_SIZE 8192 | #endif /* __ia64__ */ | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | int n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = (int) fread(buf, 1, (yy_size_t) max_size, yyin)) == 0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK /*LINTED*/break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | yy_state_type yy_current_state; | char *yy_cp, *yy_bp; | int yy_act; | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | { | #line 1 "conftest.l" | | #line 684 "lex.yy.c" | | while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (int) ((yy_c_buf_p) - (yytext_ptr)); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | | find_rule: /* we branch to this label when backing up */ | | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 793 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of user's declarations */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | char *source = (yytext_ptr); | int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1); | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | int num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart( yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc( | (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | /* "- 2" to take care of EOB's */ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | yy_state_type yy_current_state; | char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | int yy_is_jam; | | YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | #ifndef YY_NO_UNPUT | | static void yyunput (int c, char * yy_bp ) | { | char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | int number_to_move = (yy_n_chars) + 2; | char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | int offset = (int) ((yy_c_buf_p) - (yytext_ptr)); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart( yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return 0; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_init_buffer( YY_CURRENT_BUFFER, input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer( b, file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree( (void *) b->yy_ch_buf ); | | yyfree( (void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer( b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | yy_size_t grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return NULL; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = NULL; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer( b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (const char * yystr ) | { | | return yy_scan_bytes( yystr, (int) strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (const char * yybytes, int _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = (yy_size_t) (_yybytes_len + 2); | buf = (char *) yyalloc( n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer( buf, n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yynoreturn yy_fatal_error (const char* msg ) | { | fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | int yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param _line_number line number | * | */ | void yyset_lineno (int _line_number ) | { | | yylineno = _line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param _in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * _in_str ) | { | yyin = _in_str ; | } | | void yyset_out (FILE * _out_str ) | { | yyout = _out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int _bdebug ) | { | yy_flex_debug = _bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = NULL; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = NULL; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = NULL; | yyout = NULL; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer( YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, const char * s2, int n ) | { | | int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (const char * s ) | { | int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return malloc(size); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return realloc(ptr, size); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:18565: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -ll >&5 /home/test/autobuild/run/instance-1/output/host/opt/ext-toolchain/bin/../lib/gcc/powerpc-ctng_e500v2-linux-gnuspe/4.7.3/../../../../powerpc-ctng_e500v2-linux-gnuspe/bin/ld: cannot find -ll collect2: error: ld returned 1 exit status configure:18565: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | #line 2 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 6 | #define YY_FLEX_SUBMINOR_VERSION 4 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #ifndef SIZE_MAX | #define SIZE_MAX (~(size_t)0) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | /* begin standard C++ headers. */ | | /* TODO: this is always defined, so inline it */ | #define yyconst const | | #if defined(__GNUC__) && __GNUC__ >= 3 | #define yynoreturn __attribute__((__noreturn__)) | #else | #define yynoreturn | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an | * integer in range [0..255] for use as an array index. | */ | #define YY_SC_TO_UI(c) ((YY_CHAR) (c)) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart( yyin ) | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k. | * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. | * Ditto for the __ia64__ case accordingly. | */ | #define YY_BUF_SIZE 32768 | #else | #define YY_BUF_SIZE 16384 | #endif /* __ia64__ */ | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern int yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | #define YY_LINENO_REWIND_TO(ptr) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | int yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = NULL; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart ( FILE *input_file ); | void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size ); | void yy_delete_buffer ( YY_BUFFER_STATE b ); | void yy_flush_buffer ( YY_BUFFER_STATE b ); | void yypush_buffer_state ( YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state ( void ); | | static void yyensure_buffer_stack ( void ); | static void yy_load_buffer_state ( void ); | static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file ); | #define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size ); | YY_BUFFER_STATE yy_scan_string ( const char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, int len ); | | void *yyalloc ( yy_size_t ); | void *yyrealloc ( void *, yy_size_t ); | void yyfree ( void * ); | | #define yy_new_buffer yy_create_buffer | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | typedef flex_uint8_t YY_CHAR; | | FILE *yyin = NULL, *yyout = NULL; | | typedef int yy_state_type; | | extern int yylineno; | int yylineno = 1; | | extern char *yytext; | #ifdef yytext_ptr | #undef yytext_ptr | #endif | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state ( void ); | static yy_state_type yy_try_NUL_trans ( yy_state_type current_state ); | static int yy_get_next_buffer ( void ); | static void yynoreturn yy_fatal_error ( const char* msg ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (int) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static const flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static const flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static const YY_CHAR yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static const YY_CHAR yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static const flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static const flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static const flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static const flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 459 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals ( void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy ( void ); | | int yyget_debug ( void ); | | void yyset_debug ( int debug_flag ); | | YY_EXTRA_TYPE yyget_extra ( void ); | | void yyset_extra ( YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in ( void ); | | void yyset_in ( FILE * _in_str ); | | FILE *yyget_out ( void ); | | void yyset_out ( FILE * _out_str ); | | int yyget_leng ( void ); | | char *yyget_text ( void ); | | int yyget_lineno ( void ); | | void yyset_lineno ( int _line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap ( void ); | #else | extern int yywrap ( void ); | #endif | #endif | | #ifndef YY_NO_UNPUT | | static void yyunput ( int c, char *buf_ptr ); | | #endif | | #ifndef yytext_ptr | static void yy_flex_strncpy ( char *, const char *, int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen ( const char * ); | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput ( void ); | #else | static int input ( void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k */ | #define YY_READ_BUF_SIZE 16384 | #else | #define YY_READ_BUF_SIZE 8192 | #endif /* __ia64__ */ | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | int n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = (int) fread(buf, 1, (yy_size_t) max_size, yyin)) == 0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK /*LINTED*/break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | yy_state_type yy_current_state; | char *yy_cp, *yy_bp; | int yy_act; | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | { | #line 1 "conftest.l" | | #line 684 "lex.yy.c" | | while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (int) ((yy_c_buf_p) - (yytext_ptr)); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | | find_rule: /* we branch to this label when backing up */ | | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 793 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of user's declarations */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | char *source = (yytext_ptr); | int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1); | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | int num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart( yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc( | (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | /* "- 2" to take care of EOB's */ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | yy_state_type yy_current_state; | char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | int yy_is_jam; | | YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | #ifndef YY_NO_UNPUT | | static void yyunput (int c, char * yy_bp ) | { | char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | int number_to_move = (yy_n_chars) + 2; | char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | int offset = (int) ((yy_c_buf_p) - (yytext_ptr)); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart( yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return 0; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_init_buffer( YY_CURRENT_BUFFER, input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer( b, file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree( (void *) b->yy_ch_buf ); | | yyfree( (void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer( b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | yy_size_t grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return NULL; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = NULL; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer( b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (const char * yystr ) | { | | return yy_scan_bytes( yystr, (int) strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (const char * yybytes, int _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = (yy_size_t) (_yybytes_len + 2); | buf = (char *) yyalloc( n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer( buf, n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yynoreturn yy_fatal_error (const char* msg ) | { | fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | int yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param _line_number line number | * | */ | void yyset_lineno (int _line_number ) | { | | yylineno = _line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param _in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * _in_str ) | { | yyin = _in_str ; | } | | void yyset_out (FILE * _out_str ) | { | yyout = _out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int _bdebug ) | { | yy_flex_debug = _bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = NULL; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = NULL; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = NULL; | yyout = NULL; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer( YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, const char * s2, int n ) | { | | int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (const char * s ) | { | int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return malloc(size); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return realloc(ptr, size); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:18575: result: none needed configure:18581: checking whether yytext is a pointer configure:18598: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 /tmp/cch6TEMw.o: In function `yylex': conftest.c:(.text+0xbfc): undefined reference to `yywrap' conftest.c:(.text+0xe74): undefined reference to `yywrap' /tmp/cch6TEMw.o: In function `main': conftest.c:(.text.startup+0x1c): undefined reference to `yywrap' collect2: error: ld returned 1 exit status configure:18598: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | #define YYTEXT_POINTER 1 | | #line 2 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 6 | #define YY_FLEX_SUBMINOR_VERSION 4 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #ifndef SIZE_MAX | #define SIZE_MAX (~(size_t)0) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | /* begin standard C++ headers. */ | | /* TODO: this is always defined, so inline it */ | #define yyconst const | | #if defined(__GNUC__) && __GNUC__ >= 3 | #define yynoreturn __attribute__((__noreturn__)) | #else | #define yynoreturn | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an | * integer in range [0..255] for use as an array index. | */ | #define YY_SC_TO_UI(c) ((YY_CHAR) (c)) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart( yyin ) | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k. | * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. | * Ditto for the __ia64__ case accordingly. | */ | #define YY_BUF_SIZE 32768 | #else | #define YY_BUF_SIZE 16384 | #endif /* __ia64__ */ | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern int yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | #define YY_LINENO_REWIND_TO(ptr) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | int yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = NULL; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart ( FILE *input_file ); | void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size ); | void yy_delete_buffer ( YY_BUFFER_STATE b ); | void yy_flush_buffer ( YY_BUFFER_STATE b ); | void yypush_buffer_state ( YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state ( void ); | | static void yyensure_buffer_stack ( void ); | static void yy_load_buffer_state ( void ); | static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file ); | #define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size ); | YY_BUFFER_STATE yy_scan_string ( const char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, int len ); | | void *yyalloc ( yy_size_t ); | void *yyrealloc ( void *, yy_size_t ); | void yyfree ( void * ); | | #define yy_new_buffer yy_create_buffer | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | typedef flex_uint8_t YY_CHAR; | | FILE *yyin = NULL, *yyout = NULL; | | typedef int yy_state_type; | | extern int yylineno; | int yylineno = 1; | | extern char *yytext; | #ifdef yytext_ptr | #undef yytext_ptr | #endif | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state ( void ); | static yy_state_type yy_try_NUL_trans ( yy_state_type current_state ); | static int yy_get_next_buffer ( void ); | static void yynoreturn yy_fatal_error ( const char* msg ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (int) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static const flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static const flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static const YY_CHAR yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static const YY_CHAR yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static const flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static const flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static const flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static const flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 459 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals ( void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy ( void ); | | int yyget_debug ( void ); | | void yyset_debug ( int debug_flag ); | | YY_EXTRA_TYPE yyget_extra ( void ); | | void yyset_extra ( YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in ( void ); | | void yyset_in ( FILE * _in_str ); | | FILE *yyget_out ( void ); | | void yyset_out ( FILE * _out_str ); | | int yyget_leng ( void ); | | char *yyget_text ( void ); | | int yyget_lineno ( void ); | | void yyset_lineno ( int _line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap ( void ); | #else | extern int yywrap ( void ); | #endif | #endif | | #ifndef YY_NO_UNPUT | | static void yyunput ( int c, char *buf_ptr ); | | #endif | | #ifndef yytext_ptr | static void yy_flex_strncpy ( char *, const char *, int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen ( const char * ); | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput ( void ); | #else | static int input ( void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k */ | #define YY_READ_BUF_SIZE 16384 | #else | #define YY_READ_BUF_SIZE 8192 | #endif /* __ia64__ */ | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | int n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = (int) fread(buf, 1, (yy_size_t) max_size, yyin)) == 0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK /*LINTED*/break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | yy_state_type yy_current_state; | char *yy_cp, *yy_bp; | int yy_act; | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | { | #line 1 "conftest.l" | | #line 684 "lex.yy.c" | | while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (int) ((yy_c_buf_p) - (yytext_ptr)); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | | find_rule: /* we branch to this label when backing up */ | | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 793 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of user's declarations */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | char *source = (yytext_ptr); | int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1); | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | int num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart( yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc( | (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | /* "- 2" to take care of EOB's */ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | yy_state_type yy_current_state; | char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | int yy_is_jam; | | YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | #ifndef YY_NO_UNPUT | | static void yyunput (int c, char * yy_bp ) | { | char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | int number_to_move = (yy_n_chars) + 2; | char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | int offset = (int) ((yy_c_buf_p) - (yytext_ptr)); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart( yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return 0; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_init_buffer( YY_CURRENT_BUFFER, input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer( b, file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree( (void *) b->yy_ch_buf ); | | yyfree( (void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer( b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | yy_size_t grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return NULL; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = NULL; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer( b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (const char * yystr ) | { | | return yy_scan_bytes( yystr, (int) strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (const char * yybytes, int _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = (yy_size_t) (_yybytes_len + 2); | buf = (char *) yyalloc( n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer( buf, n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yynoreturn yy_fatal_error (const char* msg ) | { | fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | int yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param _line_number line number | * | */ | void yyset_lineno (int _line_number ) | { | | yylineno = _line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param _in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * _in_str ) | { | yyin = _in_str ; | } | | void yyset_out (FILE * _out_str ) | { | yyout = _out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int _bdebug ) | { | yy_flex_debug = _bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = NULL; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = NULL; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = NULL; | yyout = NULL; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer( YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, const char * s2, int n ) | { | | int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (const char * s ) | { | int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return malloc(size); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return realloc(ptr, size); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:18606: result: no configure:18623: checking if flex is the lexer generator configure:18636: result: yes configure:18650: checking for indent configure:18678: result: cat configure:18697: checking if module mako in python is installed configure:18712: result: no configure:18790: checking if compiling with clang configure:18808: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:29:8: error: unknown type name 'not' configure:18808: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | int | main () | { | | #ifndef __clang__ | not clang | #endif | | ; | return 0; | } configure:18815: result: no configure:18821: checking whether gcc version is sufficient configure:18837: result: yes configure:18849: checking whether __SUNPRO_C is declared configure:18849: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:63:10: error: '__SUNPRO_C' undeclared (first use in this function) conftest.c:63:10: note: each undeclared identifier is reported only once for each function it appears in configure:18849: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | int | main () | { | #ifndef __SUNPRO_C | #ifdef __cplusplus | (void) __SUNPRO_C; | #else | (void) __SUNPRO_C; | #endif | #endif | | ; | return 0; | } configure:18849: result: no configure:18863: checking for __builtin_bswap32 configure:18882: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:18882: $? = 0 configure:18891: result: yes configure:18907: checking for __builtin_bswap64 configure:18926: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:18926: $? = 0 configure:18935: result: yes configure:18951: checking for __builtin_clz configure:18970: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:18970: $? = 0 configure:18979: result: yes configure:18995: checking for __builtin_clzll configure:19014: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19014: $? = 0 configure:19023: result: yes configure:19039: checking for __builtin_ctz configure:19058: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19058: $? = 0 configure:19067: result: yes configure:19083: checking for __builtin_expect configure:19102: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19102: $? = 0 configure:19111: result: yes configure:19127: checking for __builtin_ffs configure:19146: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19146: $? = 0 configure:19155: result: yes configure:19171: checking for __builtin_ffsll configure:19190: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19190: $? = 0 configure:19199: result: yes configure:19215: checking for __builtin_popcount configure:19234: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19234: $? = 0 configure:19243: result: yes configure:19259: checking for __builtin_popcountll configure:19278: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19278: $? = 0 configure:19287: result: yes configure:19303: checking for __builtin_unreachable configure:19322: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19322: $? = 0 configure:19331: result: yes configure:19348: checking for __attribute__((const)) configure:19369: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19369: $? = 0 configure:19382: result: yes configure:19398: checking for __attribute__((flatten)) configure:19419: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19419: $? = 0 configure:19432: result: yes configure:19448: checking for __attribute__((format)) configure:19469: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19469: $? = 0 configure:19482: result: yes configure:19498: checking for __attribute__((malloc)) configure:19519: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19519: $? = 0 configure:19532: result: yes configure:19548: checking for __attribute__((packed)) configure:19569: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19569: $? = 0 configure:19582: result: yes configure:19598: checking for __attribute__((pure)) configure:19619: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19619: $? = 0 configure:19632: result: yes configure:19648: checking for __attribute__((returns_nonnull)) configure:19669: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c:42:21: warning: 'returns_nonnull' attribute directive ignored [-Wattributes] configure:19669: $? = 0 configure:19682: result: no configure:19698: checking for __attribute__((unused)) configure:19719: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19719: $? = 0 configure:19732: result: yes configure:19748: checking for __attribute__((visibility)) configure:19772: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19772: $? = 0 configure:19785: result: yes configure:19801: checking for __attribute__((warn_unused_result)) configure:19822: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19822: $? = 0 configure:19835: result: yes configure:19851: checking for __attribute__((weak)) configure:19872: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19872: $? = 0 configure:19885: result: yes configure:19901: checking for __attribute__((alias)) configure:19923: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:19923: $? = 0 configure:19936: result: yes configure:20069: checking pkg-config is at least version 0.9.0 configure:20072: result: yes configure:20125: checking whether /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc supports -Werror=missing-prototypes configure:20140: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:20140: $? = 0 configure:20141: result: yes configure:20153: checking whether /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc supports -fvisibility=hidden configure:20168: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fvisibility=hidden -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:20168: $? = 0 configure:20169: result: yes configure:20195: checking whether /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc supports -Werror=vla configure:20209: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -Werror=vla -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:20209: $? = 0 configure:20212: result: yes configure:20227: checking whether /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports -fvisibility=hidden configure:20248: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -fvisibility=hidden -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.cpp >&5 configure:20248: $? = 0 configure:20249: result: yes configure:20303: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -msse4.1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 powerpc-ctng_e500v2-linux-gnuspe-gcc: error: unrecognized command line option '-msse4.1' configure:20303: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE___BUILTIN_BSWAP32 1 | #define HAVE___BUILTIN_BSWAP64 1 | #define HAVE___BUILTIN_CLZ 1 | #define HAVE___BUILTIN_CLZLL 1 | #define HAVE___BUILTIN_CTZ 1 | #define HAVE___BUILTIN_EXPECT 1 | #define HAVE___BUILTIN_FFS 1 | #define HAVE___BUILTIN_FFSLL 1 | #define HAVE___BUILTIN_POPCOUNT 1 | #define HAVE___BUILTIN_POPCOUNTLL 1 | #define HAVE___BUILTIN_UNREACHABLE 1 | #define HAVE_FUNC_ATTRIBUTE_CONST 1 | #define HAVE_FUNC_ATTRIBUTE_FLATTEN 1 | #define HAVE_FUNC_ATTRIBUTE_FORMAT 1 | #define HAVE_FUNC_ATTRIBUTE_MALLOC 1 | #define HAVE_FUNC_ATTRIBUTE_PACKED 1 | #define HAVE_FUNC_ATTRIBUTE_PURE 1 | #define HAVE_FUNC_ATTRIBUTE_UNUSED 1 | #define HAVE_FUNC_ATTRIBUTE_VISIBILITY 1 | #define HAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT 1 | #define HAVE_FUNC_ATTRIBUTE_WEAK 1 | #define HAVE_FUNC_ATTRIBUTE_ALIAS 1 | /* end confdefs.h. */ | | #include | int param; | int main () { | __m128i a = _mm_set1_epi32 (param), b = _mm_set1_epi32 (param + 1), c; | c = _mm_max_epu32(a, b); | return _mm_cvtsi128_si32(c); | } configure:20330: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:20330: $? = 0 configure:20336: checking whether -latomic is needed configure:20347: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 /tmp/cc4Wgwfp.o: In function `main': conftest.c:(.text.startup+0x18): undefined reference to `__atomic_load_8' collect2: error: ld returned 1 exit status configure:20347: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE___BUILTIN_BSWAP32 1 | #define HAVE___BUILTIN_BSWAP64 1 | #define HAVE___BUILTIN_CLZ 1 | #define HAVE___BUILTIN_CLZLL 1 | #define HAVE___BUILTIN_CTZ 1 | #define HAVE___BUILTIN_EXPECT 1 | #define HAVE___BUILTIN_FFS 1 | #define HAVE___BUILTIN_FFSLL 1 | #define HAVE___BUILTIN_POPCOUNT 1 | #define HAVE___BUILTIN_POPCOUNTLL 1 | #define HAVE___BUILTIN_UNREACHABLE 1 | #define HAVE_FUNC_ATTRIBUTE_CONST 1 | #define HAVE_FUNC_ATTRIBUTE_FLATTEN 1 | #define HAVE_FUNC_ATTRIBUTE_FORMAT 1 | #define HAVE_FUNC_ATTRIBUTE_MALLOC 1 | #define HAVE_FUNC_ATTRIBUTE_PACKED 1 | #define HAVE_FUNC_ATTRIBUTE_PURE 1 | #define HAVE_FUNC_ATTRIBUTE_UNUSED 1 | #define HAVE_FUNC_ATTRIBUTE_VISIBILITY 1 | #define HAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT 1 | #define HAVE_FUNC_ATTRIBUTE_WEAK 1 | #define HAVE_FUNC_ATTRIBUTE_ALIAS 1 | /* end confdefs.h. */ | | #include | uint64_t v; | int main() { | return (int)__atomic_load_n(&v, __ATOMIC_ACQUIRE); | } configure:20354: result: yes configure:20370: checking whether __sync_add_and_fetch_8 is supported configure:20381: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 /tmp/ccOLnFSq.o: In function `main': conftest.c:(.text.startup+0x1c): undefined reference to `__sync_add_and_fetch_8' collect2: error: ld returned 1 exit status configure:20381: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE___BUILTIN_BSWAP32 1 | #define HAVE___BUILTIN_BSWAP64 1 | #define HAVE___BUILTIN_CLZ 1 | #define HAVE___BUILTIN_CLZLL 1 | #define HAVE___BUILTIN_CTZ 1 | #define HAVE___BUILTIN_EXPECT 1 | #define HAVE___BUILTIN_FFS 1 | #define HAVE___BUILTIN_FFSLL 1 | #define HAVE___BUILTIN_POPCOUNT 1 | #define HAVE___BUILTIN_POPCOUNTLL 1 | #define HAVE___BUILTIN_UNREACHABLE 1 | #define HAVE_FUNC_ATTRIBUTE_CONST 1 | #define HAVE_FUNC_ATTRIBUTE_FLATTEN 1 | #define HAVE_FUNC_ATTRIBUTE_FORMAT 1 | #define HAVE_FUNC_ATTRIBUTE_MALLOC 1 | #define HAVE_FUNC_ATTRIBUTE_PACKED 1 | #define HAVE_FUNC_ATTRIBUTE_PURE 1 | #define HAVE_FUNC_ATTRIBUTE_UNUSED 1 | #define HAVE_FUNC_ATTRIBUTE_VISIBILITY 1 | #define HAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT 1 | #define HAVE_FUNC_ATTRIBUTE_WEAK 1 | #define HAVE_FUNC_ATTRIBUTE_ALIAS 1 | /* end confdefs.h. */ | | #include | uint64_t v; | int main() { | return __sync_add_and_fetch(&v, (uint64_t)1); | } configure:20391: result: no configure:20394: checking whether byte ordering is bigendian configure:20600: result: yes configure:20618: checking whether gcc supports -mpower8-vector configure:20636: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -mpower8-vector -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 powerpc-ctng_e500v2-linux-gnuspe-gcc: error: unrecognized command line option '-mpower8-vector' configure:20636: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE___BUILTIN_BSWAP32 1 | #define HAVE___BUILTIN_BSWAP64 1 | #define HAVE___BUILTIN_CLZ 1 | #define HAVE___BUILTIN_CLZLL 1 | #define HAVE___BUILTIN_CTZ 1 | #define HAVE___BUILTIN_EXPECT 1 | #define HAVE___BUILTIN_FFS 1 | #define HAVE___BUILTIN_FFSLL 1 | #define HAVE___BUILTIN_POPCOUNT 1 | #define HAVE___BUILTIN_POPCOUNTLL 1 | #define HAVE___BUILTIN_UNREACHABLE 1 | #define HAVE_FUNC_ATTRIBUTE_CONST 1 | #define HAVE_FUNC_ATTRIBUTE_FLATTEN 1 | #define HAVE_FUNC_ATTRIBUTE_FORMAT 1 | #define HAVE_FUNC_ATTRIBUTE_MALLOC 1 | #define HAVE_FUNC_ATTRIBUTE_PACKED 1 | #define HAVE_FUNC_ATTRIBUTE_PURE 1 | #define HAVE_FUNC_ATTRIBUTE_UNUSED 1 | #define HAVE_FUNC_ATTRIBUTE_VISIBILITY 1 | #define HAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT 1 | #define HAVE_FUNC_ATTRIBUTE_WEAK 1 | #define HAVE_FUNC_ATTRIBUTE_ALIAS 1 | /* end confdefs.h. */ | | #if defined(__GNUC__) && (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 8)) | #error "Need GCC >= 4.8 for sane POWER8 support" | #endif | #include | int main () { | vector unsigned char r; | vector unsigned int v = vec_splat_u32 (1); | r = __builtin_vec_vgbbd ((vector unsigned char) v); | return 0; | } configure:20662: result: no configure:20784: checking if ld supports -Bsymbolic configure:20790: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic conftest.c >&5 configure:20790: $? = 0 configure:20791: result: yes configure:20807: checking whether ld supports --gc-sections configure:20813: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,--gc-sections conftest.c >&5 conftest.c:45:13: warning: 'UnusedFunc' defined but not used [-Wunused-function] configure:20813: $? = 0 configure:20814: result: yes configure:20842: checking if the linker supports version-scripts configure:20859: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,--version-script=conftest.map conftest.c >&5 configure:20859: $? = 0 configure:20860: result: yes configure:20878: checking if the linker supports --dynamic-list configure:20891: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,--dynamic-list=conftest.dyn conftest.c >&5 configure:20891: $? = 0 configure:20892: result: yes configure:20972: checking whether to enable assembly configure:20974: result: no configure:21073: checking whether sys/types.h defines makedev configure:21089: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:49:1: error: implicit declaration of function 'makedev' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors configure:21089: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE___BUILTIN_BSWAP32 1 | #define HAVE___BUILTIN_BSWAP64 1 | #define HAVE___BUILTIN_CLZ 1 | #define HAVE___BUILTIN_CLZLL 1 | #define HAVE___BUILTIN_CTZ 1 | #define HAVE___BUILTIN_EXPECT 1 | #define HAVE___BUILTIN_FFS 1 | #define HAVE___BUILTIN_FFSLL 1 | #define HAVE___BUILTIN_POPCOUNT 1 | #define HAVE___BUILTIN_POPCOUNTLL 1 | #define HAVE___BUILTIN_UNREACHABLE 1 | #define HAVE_FUNC_ATTRIBUTE_CONST 1 | #define HAVE_FUNC_ATTRIBUTE_FLATTEN 1 | #define HAVE_FUNC_ATTRIBUTE_FORMAT 1 | #define HAVE_FUNC_ATTRIBUTE_MALLOC 1 | #define HAVE_FUNC_ATTRIBUTE_PACKED 1 | #define HAVE_FUNC_ATTRIBUTE_PURE 1 | #define HAVE_FUNC_ATTRIBUTE_UNUSED 1 | #define HAVE_FUNC_ATTRIBUTE_VISIBILITY 1 | #define HAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT 1 | #define HAVE_FUNC_ATTRIBUTE_WEAK 1 | #define HAVE_FUNC_ATTRIBUTE_ALIAS 1 | /* end confdefs.h. */ | #include | int | main () | { | return makedev(0, 0); | ; | return 0; | } configure:21098: result: no configure:21102: checking sys/mkdev.h usability configure:21102: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c:78:23: fatal error: sys/mkdev.h: No such file or directory compilation terminated. configure:21102: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE___BUILTIN_BSWAP32 1 | #define HAVE___BUILTIN_BSWAP64 1 | #define HAVE___BUILTIN_CLZ 1 | #define HAVE___BUILTIN_CLZLL 1 | #define HAVE___BUILTIN_CTZ 1 | #define HAVE___BUILTIN_EXPECT 1 | #define HAVE___BUILTIN_FFS 1 | #define HAVE___BUILTIN_FFSLL 1 | #define HAVE___BUILTIN_POPCOUNT 1 | #define HAVE___BUILTIN_POPCOUNTLL 1 | #define HAVE___BUILTIN_UNREACHABLE 1 | #define HAVE_FUNC_ATTRIBUTE_CONST 1 | #define HAVE_FUNC_ATTRIBUTE_FLATTEN 1 | #define HAVE_FUNC_ATTRIBUTE_FORMAT 1 | #define HAVE_FUNC_ATTRIBUTE_MALLOC 1 | #define HAVE_FUNC_ATTRIBUTE_PACKED 1 | #define HAVE_FUNC_ATTRIBUTE_PURE 1 | #define HAVE_FUNC_ATTRIBUTE_UNUSED 1 | #define HAVE_FUNC_ATTRIBUTE_VISIBILITY 1 | #define HAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT 1 | #define HAVE_FUNC_ATTRIBUTE_WEAK 1 | #define HAVE_FUNC_ATTRIBUTE_ALIAS 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:21102: result: no configure:21102: checking sys/mkdev.h presence configure:21102: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c conftest.c:45:23: fatal error: sys/mkdev.h: No such file or directory compilation terminated. configure:21102: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE___BUILTIN_BSWAP32 1 | #define HAVE___BUILTIN_BSWAP64 1 | #define HAVE___BUILTIN_CLZ 1 | #define HAVE___BUILTIN_CLZLL 1 | #define HAVE___BUILTIN_CTZ 1 | #define HAVE___BUILTIN_EXPECT 1 | #define HAVE___BUILTIN_FFS 1 | #define HAVE___BUILTIN_FFSLL 1 | #define HAVE___BUILTIN_POPCOUNT 1 | #define HAVE___BUILTIN_POPCOUNTLL 1 | #define HAVE___BUILTIN_UNREACHABLE 1 | #define HAVE_FUNC_ATTRIBUTE_CONST 1 | #define HAVE_FUNC_ATTRIBUTE_FLATTEN 1 | #define HAVE_FUNC_ATTRIBUTE_FORMAT 1 | #define HAVE_FUNC_ATTRIBUTE_MALLOC 1 | #define HAVE_FUNC_ATTRIBUTE_PACKED 1 | #define HAVE_FUNC_ATTRIBUTE_PURE 1 | #define HAVE_FUNC_ATTRIBUTE_UNUSED 1 | #define HAVE_FUNC_ATTRIBUTE_VISIBILITY 1 | #define HAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT 1 | #define HAVE_FUNC_ATTRIBUTE_WEAK 1 | #define HAVE_FUNC_ATTRIBUTE_ALIAS 1 | /* end confdefs.h. */ | #include configure:21102: result: no configure:21102: checking for sys/mkdev.h configure:21102: result: no configure:21112: checking sys/sysmacros.h usability configure:21112: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:21112: $? = 0 configure:21112: result: yes configure:21112: checking sys/sysmacros.h presence configure:21112: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c configure:21112: $? = 0 configure:21112: result: yes configure:21112: checking for sys/sysmacros.h configure:21112: result: yes configure:21123: checking xlocale.h usability configure:21123: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:21123: $? = 0 configure:21123: result: yes configure:21123: checking xlocale.h presence configure:21123: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c configure:21123: $? = 0 configure:21123: result: yes configure:21123: checking for xlocale.h configure:21123: result: yes configure:21129: checking sys/sysctl.h usability configure:21129: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:21129: $? = 0 configure:21129: result: yes configure:21129: checking sys/sysctl.h presence configure:21129: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c configure:21129: $? = 0 configure:21129: result: yes configure:21129: checking for sys/sysctl.h configure:21129: result: yes configure:21135: checking endian.h usability configure:21135: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:21135: $? = 0 configure:21135: result: yes configure:21135: checking endian.h presence configure:21135: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-cpp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c configure:21135: $? = 0 configure:21135: result: yes configure:21135: checking for endian.h configure:21135: result: yes configure:21141: checking for strtof configure:21141: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:21141: $? = 0 configure:21141: result: yes configure:21146: checking for mkostemp configure:21146: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:21146: $? = 0 configure:21146: result: yes configure:21152: checking whether strtod has locale support configure:21173: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:57:8: warning: passing argument 2 of 'strtod_l' from incompatible pointer type [enabled by default] In file included from conftest.c:48:0: /home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/include/stdlib.h:260:15: note: expected 'char ** restrict' but argument is of type 'char *' conftest.c:58:8: warning: passing argument 2 of 'strtof_l' from incompatible pointer type [enabled by default] In file included from conftest.c:48:0: /home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/include/stdlib.h:264:14: note: expected 'char ** restrict' but argument is of type 'char *' conftest.c:58:14: warning: unused variable 'f' [-Wunused-variable] conftest.c:57:15: warning: unused variable 'd' [-Wunused-variable] conftest.c:57:15: warning: 'end' is used uninitialized in this function [-Wuninitialized] configure:21173: $? = 0 configure:21175: result: yes configure:21184: checking for dlopen configure:21184: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 /tmp/ccZNekl4.o: In function `main': conftest.c:(.text.startup+0xc): undefined reference to `dlopen' collect2: error: ld returned 1 exit status configure:21184: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE___BUILTIN_BSWAP32 1 | #define HAVE___BUILTIN_BSWAP64 1 | #define HAVE___BUILTIN_CLZ 1 | #define HAVE___BUILTIN_CLZLL 1 | #define HAVE___BUILTIN_CTZ 1 | #define HAVE___BUILTIN_EXPECT 1 | #define HAVE___BUILTIN_FFS 1 | #define HAVE___BUILTIN_FFSLL 1 | #define HAVE___BUILTIN_POPCOUNT 1 | #define HAVE___BUILTIN_POPCOUNTLL 1 | #define HAVE___BUILTIN_UNREACHABLE 1 | #define HAVE_FUNC_ATTRIBUTE_CONST 1 | #define HAVE_FUNC_ATTRIBUTE_FLATTEN 1 | #define HAVE_FUNC_ATTRIBUTE_FORMAT 1 | #define HAVE_FUNC_ATTRIBUTE_MALLOC 1 | #define HAVE_FUNC_ATTRIBUTE_PACKED 1 | #define HAVE_FUNC_ATTRIBUTE_PURE 1 | #define HAVE_FUNC_ATTRIBUTE_UNUSED 1 | #define HAVE_FUNC_ATTRIBUTE_VISIBILITY 1 | #define HAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT 1 | #define HAVE_FUNC_ATTRIBUTE_WEAK 1 | #define HAVE_FUNC_ATTRIBUTE_ALIAS 1 | #define MAJOR_IN_SYSMACROS 1 | /* end confdefs.h. */ | /* Define dlopen to an innocuous variant, in case declares dlopen. | For example, HP-UX 11i declares gettimeofday. */ | #define dlopen innocuous_dlopen | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char dlopen (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef dlopen | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char dlopen (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub_dlopen || defined __stub___dlopen | choke me | #endif | | int | main () | { | return dlopen (); | ; | return 0; | } configure:21184: result: no configure:21188: checking for dlopen in -ldl configure:21213: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -ldl >&5 configure:21213: $? = 0 configure:21222: result: yes configure:21236: checking for dladdr configure:21236: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -ldl >&5 configure:21236: $? = 0 configure:21236: result: yes configure:21247: checking for dl_iterate_phdr configure:21247: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:21247: $? = 0 configure:21247: result: yes configure:21259: checking for clock_gettime configure:21259: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:21259: $? = 0 configure:21259: result: yes configure:21315: checking for posix_memalign configure:21315: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:21315: $? = 0 configure:21315: result: yes configure:21323: checking for ZLIB configure:21330: $PKG_CONFIG --exists --print-errors "zlib >= $ZLIB_REQUIRED" configure:21333: $? = 0 configure:21347: $PKG_CONFIG --exists --print-errors "zlib >= $ZLIB_REQUIRED" configure:21350: $? = 0 configure:21408: result: yes configure:21581: checking for the pthreads library -lpthreads configure:21619: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -lpthreads >&5 /home/test/autobuild/run/instance-1/output/host/opt/ext-toolchain/bin/../lib/gcc/powerpc-ctng_e500v2-linux-gnuspe/4.7.3/../../../../powerpc-ctng_e500v2-linux-gnuspe/bin/ld: cannot find -lpthreads collect2: error: ld returned 1 exit status configure:21619: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE___BUILTIN_BSWAP32 1 | #define HAVE___BUILTIN_BSWAP64 1 | #define HAVE___BUILTIN_CLZ 1 | #define HAVE___BUILTIN_CLZLL 1 | #define HAVE___BUILTIN_CTZ 1 | #define HAVE___BUILTIN_EXPECT 1 | #define HAVE___BUILTIN_FFS 1 | #define HAVE___BUILTIN_FFSLL 1 | #define HAVE___BUILTIN_POPCOUNT 1 | #define HAVE___BUILTIN_POPCOUNTLL 1 | #define HAVE___BUILTIN_UNREACHABLE 1 | #define HAVE_FUNC_ATTRIBUTE_CONST 1 | #define HAVE_FUNC_ATTRIBUTE_FLATTEN 1 | #define HAVE_FUNC_ATTRIBUTE_FORMAT 1 | #define HAVE_FUNC_ATTRIBUTE_MALLOC 1 | #define HAVE_FUNC_ATTRIBUTE_PACKED 1 | #define HAVE_FUNC_ATTRIBUTE_PURE 1 | #define HAVE_FUNC_ATTRIBUTE_UNUSED 1 | #define HAVE_FUNC_ATTRIBUTE_VISIBILITY 1 | #define HAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT 1 | #define HAVE_FUNC_ATTRIBUTE_WEAK 1 | #define HAVE_FUNC_ATTRIBUTE_ALIAS 1 | #define MAJOR_IN_SYSMACROS 1 | #define HAVE_DLADDR 1 | #define HAVE_CLOCK_GETTIME 1 | /* end confdefs.h. */ | #include | static void routine(void *a) { a = 0; } | static void *start_routine(void *a) { return a; } | int | main () | { | pthread_t th; pthread_attr_t attr; | pthread_create(&th, 0, start_routine, 0); | pthread_join(th, 0); | pthread_attr_init(&attr); | pthread_cleanup_push(routine, 0); | pthread_cleanup_pop(0) /* ; */ | ; | return 0; | } configure:21628: result: no configure:21526: checking whether pthreads work without any flags configure:21619: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 /tmp/cc1Emzhz.o: In function `main': conftest.c:(.text.startup+0x20): undefined reference to `pthread_create' conftest.c:(.text.startup+0x2c): undefined reference to `pthread_join' conftest.c:(.text.startup+0x54): undefined reference to `__pthread_register_cancel' conftest.c:(.text.startup+0x5c): undefined reference to `__pthread_unregister_cancel' collect2: error: ld returned 1 exit status configure:21619: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE___BUILTIN_BSWAP32 1 | #define HAVE___BUILTIN_BSWAP64 1 | #define HAVE___BUILTIN_CLZ 1 | #define HAVE___BUILTIN_CLZLL 1 | #define HAVE___BUILTIN_CTZ 1 | #define HAVE___BUILTIN_EXPECT 1 | #define HAVE___BUILTIN_FFS 1 | #define HAVE___BUILTIN_FFSLL 1 | #define HAVE___BUILTIN_POPCOUNT 1 | #define HAVE___BUILTIN_POPCOUNTLL 1 | #define HAVE___BUILTIN_UNREACHABLE 1 | #define HAVE_FUNC_ATTRIBUTE_CONST 1 | #define HAVE_FUNC_ATTRIBUTE_FLATTEN 1 | #define HAVE_FUNC_ATTRIBUTE_FORMAT 1 | #define HAVE_FUNC_ATTRIBUTE_MALLOC 1 | #define HAVE_FUNC_ATTRIBUTE_PACKED 1 | #define HAVE_FUNC_ATTRIBUTE_PURE 1 | #define HAVE_FUNC_ATTRIBUTE_UNUSED 1 | #define HAVE_FUNC_ATTRIBUTE_VISIBILITY 1 | #define HAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT 1 | #define HAVE_FUNC_ATTRIBUTE_WEAK 1 | #define HAVE_FUNC_ATTRIBUTE_ALIAS 1 | #define MAJOR_IN_SYSMACROS 1 | #define HAVE_DLADDR 1 | #define HAVE_CLOCK_GETTIME 1 | /* end confdefs.h. */ | #include | static void routine(void *a) { a = 0; } | static void *start_routine(void *a) { return a; } | int | main () | { | pthread_t th; pthread_attr_t attr; | pthread_create(&th, 0, start_routine, 0); | pthread_join(th, 0); | pthread_attr_init(&attr); | pthread_cleanup_push(routine, 0); | pthread_cleanup_pop(0) /* ; */ | ; | return 0; | } configure:21628: result: no configure:21531: checking whether pthreads work with -Kthread configure:21619: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -Kthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 powerpc-ctng_e500v2-linux-gnuspe-gcc: error: unrecognized command line option '-Kthread' configure:21619: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE___BUILTIN_BSWAP32 1 | #define HAVE___BUILTIN_BSWAP64 1 | #define HAVE___BUILTIN_CLZ 1 | #define HAVE___BUILTIN_CLZLL 1 | #define HAVE___BUILTIN_CTZ 1 | #define HAVE___BUILTIN_EXPECT 1 | #define HAVE___BUILTIN_FFS 1 | #define HAVE___BUILTIN_FFSLL 1 | #define HAVE___BUILTIN_POPCOUNT 1 | #define HAVE___BUILTIN_POPCOUNTLL 1 | #define HAVE___BUILTIN_UNREACHABLE 1 | #define HAVE_FUNC_ATTRIBUTE_CONST 1 | #define HAVE_FUNC_ATTRIBUTE_FLATTEN 1 | #define HAVE_FUNC_ATTRIBUTE_FORMAT 1 | #define HAVE_FUNC_ATTRIBUTE_MALLOC 1 | #define HAVE_FUNC_ATTRIBUTE_PACKED 1 | #define HAVE_FUNC_ATTRIBUTE_PURE 1 | #define HAVE_FUNC_ATTRIBUTE_UNUSED 1 | #define HAVE_FUNC_ATTRIBUTE_VISIBILITY 1 | #define HAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT 1 | #define HAVE_FUNC_ATTRIBUTE_WEAK 1 | #define HAVE_FUNC_ATTRIBUTE_ALIAS 1 | #define MAJOR_IN_SYSMACROS 1 | #define HAVE_DLADDR 1 | #define HAVE_CLOCK_GETTIME 1 | /* end confdefs.h. */ | #include | static void routine(void *a) { a = 0; } | static void *start_routine(void *a) { return a; } | int | main () | { | pthread_t th; pthread_attr_t attr; | pthread_create(&th, 0, start_routine, 0); | pthread_join(th, 0); | pthread_attr_init(&attr); | pthread_cleanup_push(routine, 0); | pthread_cleanup_pop(0) /* ; */ | ; | return 0; | } configure:21628: result: no configure:21531: checking whether pthreads work with -kthread configure:21619: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -kthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 powerpc-ctng_e500v2-linux-gnuspe-gcc: error: unrecognized command line option '-kthread' configure:21619: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE___BUILTIN_BSWAP32 1 | #define HAVE___BUILTIN_BSWAP64 1 | #define HAVE___BUILTIN_CLZ 1 | #define HAVE___BUILTIN_CLZLL 1 | #define HAVE___BUILTIN_CTZ 1 | #define HAVE___BUILTIN_EXPECT 1 | #define HAVE___BUILTIN_FFS 1 | #define HAVE___BUILTIN_FFSLL 1 | #define HAVE___BUILTIN_POPCOUNT 1 | #define HAVE___BUILTIN_POPCOUNTLL 1 | #define HAVE___BUILTIN_UNREACHABLE 1 | #define HAVE_FUNC_ATTRIBUTE_CONST 1 | #define HAVE_FUNC_ATTRIBUTE_FLATTEN 1 | #define HAVE_FUNC_ATTRIBUTE_FORMAT 1 | #define HAVE_FUNC_ATTRIBUTE_MALLOC 1 | #define HAVE_FUNC_ATTRIBUTE_PACKED 1 | #define HAVE_FUNC_ATTRIBUTE_PURE 1 | #define HAVE_FUNC_ATTRIBUTE_UNUSED 1 | #define HAVE_FUNC_ATTRIBUTE_VISIBILITY 1 | #define HAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT 1 | #define HAVE_FUNC_ATTRIBUTE_WEAK 1 | #define HAVE_FUNC_ATTRIBUTE_ALIAS 1 | #define MAJOR_IN_SYSMACROS 1 | #define HAVE_DLADDR 1 | #define HAVE_CLOCK_GETTIME 1 | /* end confdefs.h. */ | #include | static void routine(void *a) { a = 0; } | static void *start_routine(void *a) { return a; } | int | main () | { | pthread_t th; pthread_attr_t attr; | pthread_create(&th, 0, start_routine, 0); | pthread_join(th, 0); | pthread_attr_init(&attr); | pthread_cleanup_push(routine, 0); | pthread_cleanup_pop(0) /* ; */ | ; | return 0; | } configure:21628: result: no configure:21581: checking for the pthreads library -llthread configure:21619: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -llthread >&5 /home/test/autobuild/run/instance-1/output/host/opt/ext-toolchain/bin/../lib/gcc/powerpc-ctng_e500v2-linux-gnuspe/4.7.3/../../../../powerpc-ctng_e500v2-linux-gnuspe/bin/ld: cannot find -llthread collect2: error: ld returned 1 exit status configure:21619: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE___BUILTIN_BSWAP32 1 | #define HAVE___BUILTIN_BSWAP64 1 | #define HAVE___BUILTIN_CLZ 1 | #define HAVE___BUILTIN_CLZLL 1 | #define HAVE___BUILTIN_CTZ 1 | #define HAVE___BUILTIN_EXPECT 1 | #define HAVE___BUILTIN_FFS 1 | #define HAVE___BUILTIN_FFSLL 1 | #define HAVE___BUILTIN_POPCOUNT 1 | #define HAVE___BUILTIN_POPCOUNTLL 1 | #define HAVE___BUILTIN_UNREACHABLE 1 | #define HAVE_FUNC_ATTRIBUTE_CONST 1 | #define HAVE_FUNC_ATTRIBUTE_FLATTEN 1 | #define HAVE_FUNC_ATTRIBUTE_FORMAT 1 | #define HAVE_FUNC_ATTRIBUTE_MALLOC 1 | #define HAVE_FUNC_ATTRIBUTE_PACKED 1 | #define HAVE_FUNC_ATTRIBUTE_PURE 1 | #define HAVE_FUNC_ATTRIBUTE_UNUSED 1 | #define HAVE_FUNC_ATTRIBUTE_VISIBILITY 1 | #define HAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT 1 | #define HAVE_FUNC_ATTRIBUTE_WEAK 1 | #define HAVE_FUNC_ATTRIBUTE_ALIAS 1 | #define MAJOR_IN_SYSMACROS 1 | #define HAVE_DLADDR 1 | #define HAVE_CLOCK_GETTIME 1 | /* end confdefs.h. */ | #include | static void routine(void *a) { a = 0; } | static void *start_routine(void *a) { return a; } | int | main () | { | pthread_t th; pthread_attr_t attr; | pthread_create(&th, 0, start_routine, 0); | pthread_join(th, 0); | pthread_attr_init(&attr); | pthread_cleanup_push(routine, 0); | pthread_cleanup_pop(0) /* ; */ | ; | return 0; | } configure:21628: result: no configure:21531: checking whether pthreads work with -pthread configure:21619: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:21619: $? = 0 configure:21628: result: yes configure:21647: checking for joinable pthread attribute configure:21662: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 configure:21662: $? = 0 configure:21668: result: PTHREAD_CREATE_JOINABLE configure:21678: checking if more special flags are required for pthreads configure:21692: result: no configure:21698: checking for PTHREAD_PRIO_INHERIT configure:21716: /home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5 conftest.c: In function 'main': conftest.c:53:9: error: 'PTHREAD_PRIO_INHERIT' undeclared (first use in this function) conftest.c:53:9: note: each undeclared identifier is reported only once for each function it appears in conftest.c:53:5: warning: unused variable 'i' [-Wunused-variable] configure:21716: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Mesa" | #define PACKAGE_TARNAME "mesa" | #define PACKAGE_VERSION "17.2.4" | #define PACKAGE_STRING "Mesa 17.2.4" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" | #define PACKAGE_URL "" | #define PACKAGE "mesa" | #define VERSION "17.2.4" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE___BUILTIN_BSWAP32 1 | #define HAVE___BUILTIN_BSWAP64 1 | #define HAVE___BUILTIN_CLZ 1 | #define HAVE___BUILTIN_CLZLL 1 | #define HAVE___BUILTIN_CTZ 1 | #define HAVE___BUILTIN_EXPECT 1 | #define HAVE___BUILTIN_FFS 1 | #define HAVE___BUILTIN_FFSLL 1 | #define HAVE___BUILTIN_POPCOUNT 1 | #define HAVE___BUILTIN_POPCOUNTLL 1 | #define HAVE___BUILTIN_UNREACHABLE 1 | #define HAVE_FUNC_ATTRIBUTE_CONST 1 | #define HAVE_FUNC_ATTRIBUTE_FLATTEN 1 | #define HAVE_FUNC_ATTRIBUTE_FORMAT 1 | #define HAVE_FUNC_ATTRIBUTE_MALLOC 1 | #define HAVE_FUNC_ATTRIBUTE_PACKED 1 | #define HAVE_FUNC_ATTRIBUTE_PURE 1 | #define HAVE_FUNC_ATTRIBUTE_UNUSED 1 | #define HAVE_FUNC_ATTRIBUTE_VISIBILITY 1 | #define HAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT 1 | #define HAVE_FUNC_ATTRIBUTE_WEAK 1 | #define HAVE_FUNC_ATTRIBUTE_ALIAS 1 | #define MAJOR_IN_SYSMACROS 1 | #define HAVE_DLADDR 1 | #define HAVE_CLOCK_GETTIME 1 | /* end confdefs.h. */ | | #include | int | main () | { | int i = PTHREAD_PRIO_INHERIT; | ; | return 0; | } configure:21725: result: no configure:22133: checking for LIBELF configure:22140: $PKG_CONFIG --exists --print-errors "libelf" configure:22143: $? = 0 configure:22157: $PKG_CONFIG --exists --print-errors "libelf" configure:22160: $? = 0 configure:22198: result: yes configure:22256: checking for powerpc-buildroot-linux-gnuspe-llvm-config configure:22289: result: no configure:22299: checking for llvm-config configure:22332: result: no configure:22618: $PKG_CONFIG --exists --print-errors "libunwind" Package libunwind was not found in the pkg-config search path. Perhaps you should add the directory containing `libunwind.pc' to the PKG_CONFIG_PATH environment variable Package 'libunwind', required by 'world', not found configure:22621: $? = 1 configure:23275: checking for LIBDRM configure:23282: $PKG_CONFIG --exists --print-errors "libdrm >= $LIBDRM_REQUIRED" configure:23285: $? = 0 configure:23299: $PKG_CONFIG --exists --print-errors "libdrm >= $LIBDRM_REQUIRED" configure:23302: $? = 0 configure:23340: result: yes configure:24107: checking for wayland-scanner configure:24125: found /home/test/autobuild/run/instance-1/output/host/bin/wayland-scanner configure:24137: result: /home/test/autobuild/run/instance-1/output/host/bin/wayland-scanner configure:24220: $PKG_CONFIG --exists --print-errors "wayland-protocols >= $WAYLAND_PROTOCOLS_REQUIRED" configure:24223: $? = 0 configure:24243: checking for WAYLAND configure:24250: $PKG_CONFIG --exists --print-errors "wayland-client >= $WAYLAND_REQUIRED wayland-server >= $WAYLAND_REQUIRED" configure:24253: $? = 0 configure:24267: $PKG_CONFIG --exists --print-errors "wayland-client >= $WAYLAND_REQUIRED wayland-server >= $WAYLAND_REQUIRED" configure:24270: $? = 0 configure:24328: result: yes configure:24770: checking for EXPAT configure:24777: $PKG_CONFIG --exists --print-errors "expat" configure:24780: $? = 0 configure:24794: $PKG_CONFIG --exists --print-errors "expat" configure:24797: $? = 0 configure:24947: result: yes configure:26345: $PKG_CONFIG --exists --print-errors "libclc" Package libclc was not found in the pkg-config search path. Perhaps you should add the directory containing `libclc.pc' to the PKG_CONFIG_PATH environment variable Package 'libclc', required by 'world', not found configure:26348: $? = 1 configure:28097: checking for VALGRIND configure:28104: $PKG_CONFIG --exists --print-errors "valgrind" configure:28107: $? = 0 configure:28121: $PKG_CONFIG --exists --print-errors "valgrind" configure:28124: $? = 0 configure:28162: result: yes configure:28167: checking whether to enable Valgrind support configure:28182: result: yes configure:28344: checking that generated files are newer than configure configure:28350: result: done configure:28789: creating ./config.status ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by Mesa config.status 17.2.4, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status on build config.status:1566: creating Makefile config.status:1566: creating src/Makefile config.status:1566: creating src/amd/Makefile config.status:1566: creating src/amd/vulkan/Makefile config.status:1566: creating src/broadcom/Makefile config.status:1566: creating src/compiler/Makefile config.status:1566: creating src/egl/Makefile config.status:1566: creating src/egl/main/egl.pc config.status:1566: creating src/egl/wayland/wayland-drm/Makefile config.status:1566: creating src/egl/wayland/wayland-egl/Makefile config.status:1566: creating src/egl/wayland/wayland-egl/wayland-egl.pc config.status:1566: creating src/gallium/Makefile config.status:1566: creating src/gallium/auxiliary/Makefile config.status:1566: creating src/gallium/auxiliary/pipe-loader/Makefile config.status:1566: creating src/gallium/drivers/freedreno/Makefile config.status:1566: creating src/gallium/drivers/ddebug/Makefile config.status:1566: creating src/gallium/drivers/i915/Makefile config.status:1566: creating src/gallium/drivers/llvmpipe/Makefile config.status:1566: creating src/gallium/drivers/noop/Makefile config.status:1566: creating src/gallium/drivers/nouveau/Makefile config.status:1566: creating src/gallium/drivers/pl111/Makefile config.status:1566: creating src/gallium/drivers/r300/Makefile config.status:1566: creating src/gallium/drivers/r600/Makefile config.status:1566: creating src/gallium/drivers/radeon/Makefile config.status:1566: creating src/gallium/drivers/radeonsi/Makefile config.status:1566: creating src/gallium/drivers/rbug/Makefile config.status:1566: creating src/gallium/drivers/softpipe/Makefile config.status:1566: creating src/gallium/drivers/svga/Makefile config.status:1566: creating src/gallium/drivers/swr/Makefile config.status:1566: creating src/gallium/drivers/trace/Makefile config.status:1566: creating src/gallium/drivers/etnaviv/Makefile config.status:1566: creating src/gallium/drivers/imx/Makefile config.status:1566: creating src/gallium/drivers/vc4/Makefile config.status:1566: creating src/gallium/drivers/virgl/Makefile config.status:1566: creating src/gallium/state_trackers/clover/Makefile config.status:1566: creating src/gallium/state_trackers/dri/Makefile config.status:1566: creating src/gallium/state_trackers/glx/xlib/Makefile config.status:1566: creating src/gallium/state_trackers/nine/Makefile config.status:1566: creating src/gallium/state_trackers/omx/Makefile config.status:1566: creating src/gallium/state_trackers/osmesa/Makefile config.status:1566: creating src/gallium/state_trackers/va/Makefile config.status:1566: creating src/gallium/state_trackers/vdpau/Makefile config.status:1566: creating src/gallium/state_trackers/xa/Makefile config.status:1566: creating src/gallium/state_trackers/xvmc/Makefile config.status:1566: creating src/gallium/targets/d3dadapter9/Makefile config.status:1566: creating src/gallium/targets/d3dadapter9/d3d.pc config.status:1566: creating src/gallium/targets/dri/Makefile config.status:1566: creating src/gallium/targets/libgl-xlib/Makefile config.status:1566: creating src/gallium/targets/omx/Makefile config.status:1566: creating src/gallium/targets/opencl/Makefile config.status:1566: creating src/gallium/targets/opencl/mesa.icd config.status:1566: creating src/gallium/targets/osmesa/Makefile config.status:1566: creating src/gallium/targets/osmesa/osmesa.pc config.status:1566: creating src/gallium/targets/pipe-loader/Makefile config.status:1566: creating src/gallium/targets/va/Makefile config.status:1566: creating src/gallium/targets/vdpau/Makefile config.status:1566: creating src/gallium/targets/xa/Makefile config.status:1566: creating src/gallium/targets/xa/xatracker.pc config.status:1566: creating src/gallium/targets/xvmc/Makefile config.status:1566: creating src/gallium/tests/trivial/Makefile config.status:1566: creating src/gallium/tests/unit/Makefile config.status:1566: creating src/gallium/winsys/etnaviv/drm/Makefile config.status:1566: creating src/gallium/winsys/imx/drm/Makefile config.status:1566: creating src/gallium/winsys/freedreno/drm/Makefile config.status:1566: creating src/gallium/winsys/i915/drm/Makefile config.status:1566: creating src/gallium/winsys/nouveau/drm/Makefile config.status:1566: creating src/gallium/winsys/pl111/drm/Makefile config.status:1566: creating src/gallium/winsys/radeon/drm/Makefile config.status:1566: creating src/gallium/winsys/amdgpu/drm/Makefile config.status:1566: creating src/gallium/winsys/svga/drm/Makefile config.status:1566: creating src/gallium/winsys/sw/dri/Makefile config.status:1566: creating src/gallium/winsys/sw/kms-dri/Makefile config.status:1566: creating src/gallium/winsys/sw/null/Makefile config.status:1566: creating src/gallium/winsys/sw/wrapper/Makefile config.status:1566: creating src/gallium/winsys/sw/xlib/Makefile config.status:1566: creating src/gallium/winsys/vc4/drm/Makefile config.status:1566: creating src/gallium/winsys/virgl/drm/Makefile config.status:1566: creating src/gallium/winsys/virgl/vtest/Makefile config.status:1566: creating src/gbm/Makefile config.status:1566: creating src/gbm/main/gbm.pc config.status:1566: creating src/glx/Makefile config.status:1566: creating src/glx/apple/Makefile config.status:1566: creating src/glx/tests/Makefile config.status:1566: creating src/glx/windows/Makefile config.status:1566: creating src/glx/windows/windowsdriproto.pc config.status:1566: creating src/gtest/Makefile config.status:1566: creating src/intel/Makefile config.status:1566: creating src/loader/Makefile config.status:1566: creating src/mapi/Makefile config.status:1566: creating src/mapi/es1api/glesv1_cm.pc config.status:1566: creating src/mapi/es2api/glesv2.pc config.status:1566: creating src/mapi/glapi/gen/Makefile config.status:1566: creating src/mesa/Makefile config.status:1566: creating src/mesa/gl.pc config.status:1566: creating src/mesa/drivers/dri/dri.pc config.status:1566: creating src/mesa/drivers/dri/common/Makefile config.status:1566: creating src/mesa/drivers/dri/common/xmlpool/Makefile config.status:1566: creating src/mesa/drivers/dri/i915/Makefile config.status:1566: creating src/mesa/drivers/dri/i965/Makefile config.status:1566: creating src/mesa/drivers/dri/Makefile config.status:1566: creating src/mesa/drivers/dri/nouveau/Makefile config.status:1566: creating src/mesa/drivers/dri/r200/Makefile config.status:1566: creating src/mesa/drivers/dri/radeon/Makefile config.status:1566: creating src/mesa/drivers/dri/swrast/Makefile config.status:1566: creating src/mesa/drivers/osmesa/Makefile config.status:1566: creating src/mesa/drivers/osmesa/osmesa.pc config.status:1566: creating src/mesa/drivers/x11/Makefile config.status:1566: creating src/mesa/main/tests/Makefile config.status:1566: creating src/util/Makefile config.status:1566: creating src/util/tests/hash_table/Makefile config.status:1566: creating src/vulkan/Makefile config.status:1738: executing depfiles commands config.status:1738: executing libtool commands configure:31116: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls ## ---------------- ## ## Cache variables. ## ## ---------------- ## _cv_gnu_make_command=make ac_cv_build=x86_64-pc-linux-gnu ac_cv_c_bigendian=yes ac_cv_c_compiler_gnu=yes ac_cv_cxx_compiler_gnu=yes ac_cv_env_AMDGPU_CFLAGS_set= ac_cv_env_AMDGPU_CFLAGS_value= ac_cv_env_AMDGPU_LIBS_set= ac_cv_env_AMDGPU_LIBS_value= ac_cv_env_ANDROID_CFLAGS_set= ac_cv_env_ANDROID_CFLAGS_value= ac_cv_env_ANDROID_LIBS_set= ac_cv_env_ANDROID_LIBS_value= ac_cv_env_CCASFLAGS_set= ac_cv_env_CCASFLAGS_value= ac_cv_env_CCAS_set= ac_cv_env_CCAS_value= ac_cv_env_CCC_set= ac_cv_env_CCC_value= ac_cv_env_CC_set=set ac_cv_env_CC_value=/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc ac_cv_env_CFLAGS_set=set ac_cv_env_CFLAGS_value='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os ' ac_cv_env_CPPFLAGS_set=set ac_cv_env_CPPFLAGS_value='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' ac_cv_env_CPP_set=set ac_cv_env_CPP_value=/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-cpp ac_cv_env_CXXCPP_set= ac_cv_env_CXXCPP_value= ac_cv_env_CXXFLAGS_set=set ac_cv_env_CXXFLAGS_value='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os ' ac_cv_env_CXX_set=set ac_cv_env_CXX_value=/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ ac_cv_env_DRI2PROTO_CFLAGS_set= ac_cv_env_DRI2PROTO_CFLAGS_value= ac_cv_env_DRI2PROTO_LIBS_set= ac_cv_env_DRI2PROTO_LIBS_value= ac_cv_env_DRIGL_CFLAGS_set= ac_cv_env_DRIGL_CFLAGS_value= ac_cv_env_DRIGL_LIBS_set= ac_cv_env_DRIGL_LIBS_value= ac_cv_env_ETNAVIV_CFLAGS_set= ac_cv_env_ETNAVIV_CFLAGS_value= ac_cv_env_ETNAVIV_LIBS_set= ac_cv_env_ETNAVIV_LIBS_value= ac_cv_env_EXPAT_CFLAGS_set= ac_cv_env_EXPAT_CFLAGS_value= ac_cv_env_EXPAT_LIBS_set= ac_cv_env_EXPAT_LIBS_value= ac_cv_env_FREEDRENO_CFLAGS_set= ac_cv_env_FREEDRENO_CFLAGS_value= ac_cv_env_FREEDRENO_LIBS_set= ac_cv_env_FREEDRENO_LIBS_value= ac_cv_env_GLPROTO_CFLAGS_set= ac_cv_env_GLPROTO_CFLAGS_value= ac_cv_env_GLPROTO_LIBS_set= ac_cv_env_GLPROTO_LIBS_value= ac_cv_env_GLVND_CFLAGS_set= ac_cv_env_GLVND_CFLAGS_value= ac_cv_env_GLVND_LIBS_set= ac_cv_env_GLVND_LIBS_value= ac_cv_env_I915_CFLAGS_set= ac_cv_env_I915_CFLAGS_value= ac_cv_env_I915_LIBS_set= ac_cv_env_I915_LIBS_value= ac_cv_env_LDFLAGS_set=set ac_cv_env_LDFLAGS_value= ac_cv_env_LIBDRM_CFLAGS_set= ac_cv_env_LIBDRM_CFLAGS_value= ac_cv_env_LIBDRM_LIBS_set= ac_cv_env_LIBDRM_LIBS_value= ac_cv_env_LIBELF_CFLAGS_set= ac_cv_env_LIBELF_CFLAGS_value= ac_cv_env_LIBELF_LIBS_set= ac_cv_env_LIBELF_LIBS_value= ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_LIBUNWIND_CFLAGS_set= ac_cv_env_LIBUNWIND_CFLAGS_value= ac_cv_env_LIBUNWIND_LIBS_set= ac_cv_env_LIBUNWIND_LIBS_value= ac_cv_env_LT_SYS_LIBRARY_PATH_set= ac_cv_env_LT_SYS_LIBRARY_PATH_value= ac_cv_env_NOUVEAU_CFLAGS_set= ac_cv_env_NOUVEAU_CFLAGS_value= ac_cv_env_NOUVEAU_LIBS_set= ac_cv_env_NOUVEAU_LIBS_value= ac_cv_env_NVVIEUX_CFLAGS_set= ac_cv_env_NVVIEUX_CFLAGS_value= ac_cv_env_NVVIEUX_LIBS_set= ac_cv_env_NVVIEUX_LIBS_value= ac_cv_env_OMX_CFLAGS_set= ac_cv_env_OMX_CFLAGS_value= ac_cv_env_OMX_LIBS_set= ac_cv_env_OMX_LIBS_value= ac_cv_env_PKG_CONFIG_LIBDIR_set= ac_cv_env_PKG_CONFIG_LIBDIR_value= ac_cv_env_PKG_CONFIG_PATH_set= ac_cv_env_PKG_CONFIG_PATH_value= ac_cv_env_PKG_CONFIG_set=set ac_cv_env_PKG_CONFIG_value=/home/test/autobuild/run/instance-1/output/host/bin/pkg-config ac_cv_env_PTHREADSTUBS_CFLAGS_set= ac_cv_env_PTHREADSTUBS_CFLAGS_value= ac_cv_env_PTHREADSTUBS_LIBS_set= ac_cv_env_PTHREADSTUBS_LIBS_value= ac_cv_env_RADEON_CFLAGS_set= ac_cv_env_RADEON_CFLAGS_value= ac_cv_env_RADEON_LIBS_set= ac_cv_env_RADEON_LIBS_value= ac_cv_env_SELINUX_CFLAGS_set= ac_cv_env_SELINUX_CFLAGS_value= ac_cv_env_SELINUX_LIBS_set= ac_cv_env_SELINUX_LIBS_value= ac_cv_env_SIMPENROSE_CFLAGS_set= ac_cv_env_SIMPENROSE_CFLAGS_value= ac_cv_env_SIMPENROSE_LIBS_set= ac_cv_env_SIMPENROSE_LIBS_value= ac_cv_env_VALGRIND_CFLAGS_set= ac_cv_env_VALGRIND_CFLAGS_value= ac_cv_env_VALGRIND_LIBS_set= ac_cv_env_VALGRIND_LIBS_value= ac_cv_env_VA_CFLAGS_set= ac_cv_env_VA_CFLAGS_value= ac_cv_env_VA_LIBS_set= ac_cv_env_VA_LIBS_value= ac_cv_env_VDPAU_CFLAGS_set= ac_cv_env_VDPAU_CFLAGS_value= ac_cv_env_VDPAU_LIBS_set= ac_cv_env_VDPAU_LIBS_value= ac_cv_env_VL_CFLAGS_set= ac_cv_env_VL_CFLAGS_value= ac_cv_env_VL_LIBS_set= ac_cv_env_VL_LIBS_value= ac_cv_env_WAYLAND_CFLAGS_set= ac_cv_env_WAYLAND_CFLAGS_value= ac_cv_env_WAYLAND_LIBS_set= ac_cv_env_WAYLAND_LIBS_value= ac_cv_env_WAYLAND_SCANNER_CFLAGS_set= ac_cv_env_WAYLAND_SCANNER_CFLAGS_value= ac_cv_env_WAYLAND_SCANNER_LIBS_set= ac_cv_env_WAYLAND_SCANNER_LIBS_value= ac_cv_env_XCB_DRI2_CFLAGS_set= ac_cv_env_XCB_DRI2_CFLAGS_value= ac_cv_env_XCB_DRI2_LIBS_set= ac_cv_env_XCB_DRI2_LIBS_value= ac_cv_env_XCB_DRI3_CFLAGS_set= ac_cv_env_XCB_DRI3_CFLAGS_value= ac_cv_env_XCB_DRI3_LIBS_set= ac_cv_env_XCB_DRI3_LIBS_value= ac_cv_env_XF86VIDMODE_CFLAGS_set= ac_cv_env_XF86VIDMODE_CFLAGS_value= ac_cv_env_XF86VIDMODE_LIBS_set= ac_cv_env_XF86VIDMODE_LIBS_value= ac_cv_env_XLIBGL_CFLAGS_set= ac_cv_env_XLIBGL_CFLAGS_value= ac_cv_env_XLIBGL_LIBS_set= ac_cv_env_XLIBGL_LIBS_value= ac_cv_env_XVMC_CFLAGS_set= ac_cv_env_XVMC_CFLAGS_value= ac_cv_env_XVMC_LIBS_set= ac_cv_env_XVMC_LIBS_value= ac_cv_env_YACC_set= ac_cv_env_YACC_value= ac_cv_env_YFLAGS_set= ac_cv_env_YFLAGS_value= ac_cv_env_ZLIB_CFLAGS_set= ac_cv_env_ZLIB_CFLAGS_value= ac_cv_env_ZLIB_LIBS_set= ac_cv_env_ZLIB_LIBS_value= ac_cv_env_build_alias_set=set ac_cv_env_build_alias_value=x86_64-pc-linux-gnu ac_cv_env_host_alias_set=set ac_cv_env_host_alias_value=powerpc-buildroot-linux-gnuspe ac_cv_env_target_alias_set=set ac_cv_env_target_alias_value=powerpc-buildroot-linux-gnuspe ac_cv_func_calloc_0_nonnull=yes ac_cv_func_clock_gettime=yes ac_cv_func_dl_iterate_phdr=yes ac_cv_func_dladdr=yes ac_cv_func_dlopen=no ac_cv_func_malloc_0_nonnull=yes ac_cv_func_memcmp_working=yes ac_cv_func_mkostemp=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_posix_memalign=yes ac_cv_func_realloc_0_nonnull=yes ac_cv_func_strtof=yes ac_cv_have_decl___SUNPRO_C=no ac_cv_have_decl_malloc=yes ac_cv_header_dlfcn_h=yes ac_cv_header_endian_h=yes ac_cv_header_inttypes_h=yes ac_cv_header_memory_h=yes ac_cv_header_stdc=yes ac_cv_header_stdint_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_strings_h=yes ac_cv_header_sys_mkdev_h=no ac_cv_header_sys_stat_h=yes ac_cv_header_sys_sysctl_h=yes ac_cv_header_sys_sysmacros_h=yes ac_cv_header_sys_types_h=yes ac_cv_header_sys_types_h_makedev=no ac_cv_header_unistd_h=yes ac_cv_header_xlocale_h=yes ac_cv_host=powerpc-buildroot-linux-gnuspe ac_cv_lbl_unaligned_fail=no ac_cv_lib_dl_dlopen=yes ac_cv_lib_lex='none needed' ac_cv_objext=o ac_cv_path_EGREP='/bin/grep -E' ac_cv_path_FGREP='/bin/grep -F' ac_cv_path_GREP=/bin/grep ac_cv_path_SED=/bin/sed ac_cv_path_WAYLAND_SCANNER=/home/test/autobuild/run/instance-1/output/host/bin/wayland-scanner ac_cv_path_install='/usr/bin/install -c' ac_cv_path_lt_DD=/bin/dd ac_cv_path_mkdir=/bin/mkdir ac_cv_prog_AR=/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ar ac_cv_prog_AWK=mawk ac_cv_prog_CC=/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc ac_cv_prog_CPP=/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-cpp ac_cv_prog_CXXCPP='/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -E' ac_cv_prog_INDENT=cat ac_cv_prog_LEX=flex ac_cv_prog_OBJDUMP=/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-objdump ac_cv_prog_PYTHON2=python2.7 ac_cv_prog_RANLIB=/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ranlib ac_cv_prog_RM='rm -f' ac_cv_prog_STRIP=/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-strip ac_cv_prog_YACC='bison -y' ac_cv_prog_ac_ct_MANIFEST_TOOL=mt ac_cv_prog_cc_c89= ac_cv_prog_cc_g=yes ac_cv_prog_cxx_g=yes ac_cv_prog_lex_root=lex.yy ac_cv_prog_lex_yytext_pointer=no ac_cv_prog_make_make_set=yes ac_cv_sys_file_offset_bits=no ac_cv_sys_largefile_CC=no ac_cv_target=powerpc-buildroot-linux-gnuspe am_cv_CCAS_dependencies_compiler_type=none am_cv_CC_dependencies_compiler_type=none am_cv_CXX_dependencies_compiler_type=none am_cv_ar_interface=ar am_cv_make_support_nested_variables=yes am_cv_prog_cc_c_o=yes am_cv_prog_tar_ustar=gnutar ax_cv_PTHREAD_PRIO_INHERIT=no ax_cv_have___builtin_bswap32=yes ax_cv_have___builtin_bswap64=yes ax_cv_have___builtin_clz=yes ax_cv_have___builtin_clzll=yes ax_cv_have___builtin_ctz=yes ax_cv_have___builtin_expect=yes ax_cv_have___builtin_ffs=yes ax_cv_have___builtin_ffsll=yes ax_cv_have___builtin_popcount=yes ax_cv_have___builtin_popcountll=yes ax_cv_have___builtin_unreachable=yes ax_cv_have_func_attribute_alias=yes ax_cv_have_func_attribute_const=yes ax_cv_have_func_attribute_flatten=yes ax_cv_have_func_attribute_format=yes ax_cv_have_func_attribute_malloc=yes ax_cv_have_func_attribute_packed=yes ax_cv_have_func_attribute_pure=yes ax_cv_have_func_attribute_returns_nonnull=no ax_cv_have_func_attribute_unused=yes ax_cv_have_func_attribute_visibility=yes ax_cv_have_func_attribute_warn_unused_result=yes ax_cv_have_func_attribute_weak=yes ax_cv_prog_bison=yes ax_cv_prog_flex=yes gl_cv_func_malloc_0_nonnull=yes lt_cv_ar_at_file=@ lt_cv_archive_cmds_need_lc=no lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_ld_reload_flag=-r lt_cv_nm_interface='BSD nm' lt_cv_objdir=.libs lt_cv_path_LD=/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ld lt_cv_path_LDCXX=/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ld lt_cv_path_NM=/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-nm lt_cv_path_mainfest_tool=no lt_cv_prog_compiler_c_o=yes lt_cv_prog_compiler_c_o_CXX=yes lt_cv_prog_compiler_pic='-fPIC -DPIC' lt_cv_prog_compiler_pic_CXX='-fPIC -DPIC' lt_cv_prog_compiler_pic_works=yes lt_cv_prog_compiler_pic_works_CXX=yes lt_cv_prog_compiler_rtti_exceptions=no lt_cv_prog_compiler_static_works=yes lt_cv_prog_compiler_static_works_CXX=yes lt_cv_prog_gnu_ld=yes lt_cv_prog_gnu_ldcxx=yes lt_cv_sharedlib_from_linklib_cmd='printf %s\n' lt_cv_shlibpath_overrides_runpath=no lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'' | sed '\''/ __gnu_lto/d'\''' lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"\1", (void *) \&\1},/p'\''' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(lib.*\)$/ {"\1", (void *) \&\1},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"lib\1", (void *) \&\1},/p'\''' lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\''' lt_cv_sys_global_symbol_to_import= lt_cv_sys_lib_search_path_spec= lt_cv_sys_max_cmd_len=3458764513820540925 lt_cv_to_host_file_cmd=func_convert_file_noop lt_cv_to_tool_file_cmd=func_convert_file_noop lt_cv_truncate_bin='/bin/dd bs=4096 count=1' pkg_cv_EXPAT_CFLAGS='-I/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/include ' pkg_cv_EXPAT_LIBS='-L/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/lib -lexpat ' pkg_cv_LIBDRM_CFLAGS='-I/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/include -I/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/include/libdrm ' pkg_cv_LIBDRM_LIBS='-L/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/lib -ldrm ' pkg_cv_LIBELF_CFLAGS='-I/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/include ' pkg_cv_LIBELF_LIBS='-L/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/lib -lelf ' pkg_cv_VALGRIND_CFLAGS='-I/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/include/valgrind ' pkg_cv_VALGRIND_LIBS='-L/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/lib/valgrind -lcoregrind-ppc32-linux -lvex-ppc32-linux -lgcc ' pkg_cv_WAYLAND_CFLAGS='-I/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/include ' pkg_cv_WAYLAND_LIBS='-L/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/lib -lwayland-client -lwayland-server ' pkg_cv_ZLIB_CFLAGS='-I/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/include ' pkg_cv_ZLIB_LIBS='-L/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/lib -lz ' ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} /home/test/autobuild/run/instance-1/output/build/mesa3d-17.2.4/bin/missing aclocal-1.15' AMDEPBACKSLASH='' AMDEP_FALSE='' AMDEP_TRUE='#' AMDGPU_CFLAGS='' AMDGPU_LIBS='' AMTAR='$${TAR-tar}' AM_BACKSLASH='\' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' AM_DEFAULT_VERBOSITY='0' AM_V='$(V)' ANDROID_CFLAGS='' ANDROID_LIBS='' AR='/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ar' AUTOCONF='${SHELL} /home/test/autobuild/run/instance-1/output/build/mesa3d-17.2.4/bin/missing autoconf' AUTOHEADER='${SHELL} /home/test/autobuild/run/instance-1/output/build/mesa3d-17.2.4/bin/missing autoheader' AUTOMAKE='${SHELL} /home/test/autobuild/run/instance-1/output/build/mesa3d-17.2.4/bin/missing automake-1.15' AWK='mawk' BSYMBOLIC='-Wl,-Bsymbolic' BUILD_SHARED_FALSE='#' BUILD_SHARED_TRUE='' CC='/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc' CCAS='/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc' CCASDEPMODE='depmode=none' CCASFLAGS='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os ' CCDEPMODE='depmode=none' CFLAGS='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -std=c99 -Werror=implicit-function-declaration -Werror=missing-prototypes -fno-math-errno -fno-trapping-math ' CLANG_RESOURCE_DIR='' CLOCK_LIB='' CLOVER_STD_OVERRIDE='' CPP='/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-cpp' CPPFLAGS='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' CXX='/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++' CXXCPP='/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -E' CXXDEPMODE='depmode=none' CXXFLAGS='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -Wall -fno-math-errno -fno-trapping-math ' CYGPATH_W='echo' D3D_DRIVER_INSTALL_DIR='${exec_prefix}/lib/d3d' DEFINES='-D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS -D__STDC_LIMIT_MACROS -D_GNU_SOURCE -DUSE_GCC_ATOMIC_BUILTINS -DMISSING_64BIT_ATOMICS -DNDEBUG -DHAVE_XLOCALE_H -DHAVE_SYS_SYSCTL_H -DHAVE_ENDIAN_H -DHAVE_STRTOF -DHAVE_MKOSTEMP -DHAVE_STRTOD_L -DHAVE_DLOPEN -DHAVE_DL_ITERATE_PHDR -DHAVE_POSIX_MEMALIGN -DHAVE_GALLIUM_EXTRA_HUD=1 -DHAVE_LIBDRM -DGLX_USE_TLS -DHAVE_WAYLAND_PLATFORM -DENABLE_SHADER_CACHE -DMESA_EGL_NO_X11_HEADERS' DEFS='-DPACKAGE_NAME=\"Mesa\" -DPACKAGE_TARNAME=\"mesa\" -DPACKAGE_VERSION=\"17.2.4\" -DPACKAGE_STRING=\"Mesa\ 17.2.4\" -DPACKAGE_BUGREPORT=\"https://bugs.freedesktop.org/enter_bug.cgi\?product=Mesa\" -DPACKAGE_URL=\"\" -DPACKAGE=\"mesa\" -DVERSION=\"17.2.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE___BUILTIN_BSWAP32=1 -DHAVE___BUILTIN_BSWAP64=1 -DHAVE___BUILTIN_CLZ=1 -DHAVE___BUILTIN_CLZLL=1 -DHAVE___BUILTIN_CTZ=1 -DHAVE___BUILTIN_EXPECT=1 -DHAVE___BUILTIN_FFS=1 -DHAVE___BUILTIN_FFSLL=1 -DHAVE___BUILTIN_POPCOUNT=1 -DHAVE___BUILTIN_POPCOUNTLL=1 -DHAVE___BUILTIN_UNREACHABLE=1 -DHAVE_FUNC_ATTRIBUTE_CONST=1 -DHAVE_FUNC_ATTRIBUTE_FLATTEN=1 -DHAVE_FUNC_ATTRIBUTE_FORMAT=1 -DHAVE_FUNC_ATTRIBUTE_MALLOC=1 -DHAVE_FUNC_ATTRIBUTE_PACKED=1 -DHAVE_FUNC_ATTRIBUTE_PURE=1 -DHAVE_FUNC_ATTRIBUTE_UNUSED=1 -DHAVE_FUNC_ATTRIBUTE_VISIBILITY=1 -DHAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT=1 -DHAVE_FUNC_ATTRIBUTE_WEAK=1 -DHAVE_FUNC_ATTRIBUTE_ALIAS=1 -DMAJOR_IN_SYSMACROS=1 -DHAVE_DLADDR=1 -DHAVE_CLOCK_GETTIME=1 -DHAVE_PTHREAD=1 -DHAVE_VALGRIND=1' DEPDIR='.deps' DLLTOOL='false' DLOPEN_LIBS='-ldl' DRI2PROTO_CFLAGS='' DRI2PROTO_LIBS='' DRIGL_CFLAGS='' DRIGL_LIBS='' DRI_DRIVER_INSTALL_DIR='${libdir}/dri' DRI_DRIVER_SEARCH_DIR='${DRI_DRIVER_INSTALL_DIR}' DRI_LIB_DEPS=' -L/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/lib -ldrm -L/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/lib -lexpat -lm -lpthread -pthread -ldl' DRI_PC_REQ_PRIV='libdrm >= 2.4.75' DSYMUTIL='' DUMPBIN='' ECHO_C='' ECHO_N='-n' ECHO_T='' EGL_CFLAGS='' EGL_LIB_DEPS='' EGL_NATIVE_PLATFORM='_EGL_PLATFORM_WAYLAND' EGREP='/bin/grep -E' ETNAVIV_CFLAGS='' ETNAVIV_LIBS='' EXEEXT='' EXPAT_CFLAGS='-I/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/include ' EXPAT_LIBS='-L/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/lib -lexpat ' FGREP='/bin/grep -F' FREEDRENO_CFLAGS='' FREEDRENO_LIBS='' GALLIUM_PIPE_LOADER_DEFINES=' -DHAVE_PIPE_LOADER_DRI -DHAVE_PIPE_LOADER_KMS' GBM_PC_LIB_PRIV='-ldl' GBM_PC_REQ_PRIV='' GCC_ATOMIC_BUILTINS_SUPPORTED_FALSE='#' GCC_ATOMIC_BUILTINS_SUPPORTED_TRUE='' GC_SECTIONS='-Wl,--gc-sections' GEN_ASM_OFFSETS_FALSE='#' GEN_ASM_OFFSETS_TRUE='' GLESv1_CM_LIB_DEPS='-L/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/lib -ldrm -lm -lpthread -pthread -ldl' GLESv1_CM_PC_LIB_PRIV='-lm -lpthread -pthread -ldl' GLESv2_LIB_DEPS='-L/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/lib -ldrm -lm -lpthread -pthread -ldl' GLESv2_PC_LIB_PRIV='-lm -lpthread -pthread -ldl' GLPROTO_CFLAGS='' GLPROTO_LIBS='' GLVND_CFLAGS='' GLVND_LIBS='' GLX_TLS='yes' GL_LIB='GL' GL_LIB_DEPS='' GL_PC_CFLAGS=' -DMESA_EGL_NO_X11_HEADERS' GL_PC_LIB_PRIV='' GL_PC_REQ_PRIV='' GREP='/bin/grep' HAVE_AARCH64_ASM_FALSE='' HAVE_AARCH64_ASM_TRUE='#' HAVE_AMD_DRIVERS_FALSE='' HAVE_AMD_DRIVERS_TRUE='#' HAVE_ANDROID_FALSE='' HAVE_ANDROID_TRUE='#' HAVE_APPLEDRI_FALSE='' HAVE_APPLEDRI_TRUE='#' HAVE_ARM_ASM_FALSE='' HAVE_ARM_ASM_TRUE='#' HAVE_CLOVER_FALSE='' HAVE_CLOVER_ICD_FALSE='' HAVE_CLOVER_ICD_TRUE='#' HAVE_CLOVER_TRUE='#' HAVE_COMMON_OSMESA_FALSE='' HAVE_COMMON_OSMESA_TRUE='#' HAVE_COMPAT_SYMLINKS_FALSE='#' HAVE_COMPAT_SYMLINKS_TRUE='' HAVE_DRI2_FALSE='#' HAVE_DRI2_TRUE='' HAVE_DRI3_FALSE='' HAVE_DRI3_TRUE='#' HAVE_DRICOMMON_FALSE='#' HAVE_DRICOMMON_TRUE='' HAVE_DRISW_FALSE='#' HAVE_DRISW_KMS_FALSE='#' HAVE_DRISW_KMS_TRUE='' HAVE_DRISW_TRUE='' HAVE_DRI_GLX_FALSE='' HAVE_DRI_GLX_TRUE='#' HAVE_EGL_FALSE='' HAVE_EGL_TRUE='#' HAVE_GALLIUM_COMPUTE_FALSE='' HAVE_GALLIUM_COMPUTE_TRUE='#' HAVE_GALLIUM_ETNAVIV_FALSE='' HAVE_GALLIUM_ETNAVIV_TRUE='#' HAVE_GALLIUM_EXTRA_HUD_FALSE='#' HAVE_GALLIUM_EXTRA_HUD_TRUE='' HAVE_GALLIUM_FALSE='#' HAVE_GALLIUM_FREEDRENO_FALSE='' HAVE_GALLIUM_FREEDRENO_TRUE='#' HAVE_GALLIUM_I915_FALSE='' HAVE_GALLIUM_I915_TRUE='#' HAVE_GALLIUM_IMX_FALSE='' HAVE_GALLIUM_IMX_TRUE='#' HAVE_GALLIUM_LLVMPIPE_FALSE='' HAVE_GALLIUM_LLVMPIPE_TRUE='#' HAVE_GALLIUM_LLVM_FALSE='' HAVE_GALLIUM_LLVM_TRUE='#' HAVE_GALLIUM_NOUVEAU_FALSE='' HAVE_GALLIUM_NOUVEAU_TRUE='#' HAVE_GALLIUM_OSMESA_FALSE='' HAVE_GALLIUM_OSMESA_TRUE='#' HAVE_GALLIUM_PL111_FALSE='' HAVE_GALLIUM_PL111_TRUE='#' HAVE_GALLIUM_R300_FALSE='' HAVE_GALLIUM_R300_TRUE='#' HAVE_GALLIUM_R600_FALSE='' HAVE_GALLIUM_R600_TRUE='#' HAVE_GALLIUM_RADEONSI_FALSE='' HAVE_GALLIUM_RADEONSI_TRUE='#' HAVE_GALLIUM_RADEON_COMMON_FALSE='' HAVE_GALLIUM_RADEON_COMMON_TRUE='#' HAVE_GALLIUM_SOFTPIPE_FALSE='#' HAVE_GALLIUM_SOFTPIPE_TRUE='' HAVE_GALLIUM_STATIC_TARGETS_FALSE='#' HAVE_GALLIUM_STATIC_TARGETS_TRUE='' HAVE_GALLIUM_SVGA_FALSE='' HAVE_GALLIUM_SVGA_TRUE='#' HAVE_GALLIUM_SWRAST_FALSE='#' HAVE_GALLIUM_SWRAST_TRUE='' HAVE_GALLIUM_SWR_FALSE='' HAVE_GALLIUM_SWR_TRUE='#' HAVE_GALLIUM_TESTS_FALSE='' HAVE_GALLIUM_TESTS_TRUE='#' HAVE_GALLIUM_TRUE='' HAVE_GALLIUM_VC4_FALSE='' HAVE_GALLIUM_VC4_TRUE='#' HAVE_GALLIUM_VIRGL_FALSE='' HAVE_GALLIUM_VIRGL_TRUE='#' HAVE_GALLIUM_XLIB_GLX_FALSE='' HAVE_GALLIUM_XLIB_GLX_TRUE='#' HAVE_GBM_FALSE='#' HAVE_GBM_TRUE='' HAVE_GLX_FALSE='' HAVE_GLX_TRUE='#' HAVE_I915_DRI_FALSE='' HAVE_I915_DRI_TRUE='#' HAVE_I965_DRI_FALSE='' HAVE_I965_DRI_TRUE='#' HAVE_INTEL_DRIVERS_FALSE='' HAVE_INTEL_DRIVERS_TRUE='#' HAVE_INTEL_VULKAN_FALSE='' HAVE_INTEL_VULKAN_TRUE='#' HAVE_LD_DYNAMIC_LIST_FALSE='#' HAVE_LD_DYNAMIC_LIST_TRUE='' HAVE_LD_VERSION_SCRIPT_FALSE='#' HAVE_LD_VERSION_SCRIPT_TRUE='' HAVE_LIBDRM_FALSE='#' HAVE_LIBDRM_TRUE='' HAVE_LIBSENSORS_FALSE='' HAVE_LIBSENSORS_TRUE='#' HAVE_LMSENSORS_FALSE='' HAVE_LMSENSORS_TRUE='#' HAVE_NOUVEAU_DRI_FALSE='' HAVE_NOUVEAU_DRI_TRUE='#' HAVE_OPENGL_ES1_FALSE='#' HAVE_OPENGL_ES1_TRUE='' HAVE_OPENGL_ES2_FALSE='#' HAVE_OPENGL_ES2_TRUE='' HAVE_OPENGL_FALSE='#' HAVE_OPENGL_TRUE='' HAVE_OSMESA_FALSE='' HAVE_OSMESA_TRUE='#' HAVE_PLATFORM_ANDROID_FALSE='' HAVE_PLATFORM_ANDROID_TRUE='#' HAVE_PLATFORM_DRM_FALSE='' HAVE_PLATFORM_DRM_TRUE='#' HAVE_PLATFORM_SURFACELESS_FALSE='' HAVE_PLATFORM_SURFACELESS_TRUE='#' HAVE_PLATFORM_WAYLAND_FALSE='#' HAVE_PLATFORM_WAYLAND_TRUE='' HAVE_PLATFORM_X11_FALSE='' HAVE_PLATFORM_X11_TRUE='#' HAVE_PPC64LE_ASM_FALSE='' HAVE_PPC64LE_ASM_TRUE='#' HAVE_R200_DRI_FALSE='' HAVE_R200_DRI_TRUE='#' HAVE_RADEON_DRI_FALSE='' HAVE_RADEON_DRI_TRUE='#' HAVE_RADEON_VULKAN_FALSE='' HAVE_RADEON_VULKAN_TRUE='#' HAVE_SHARED_GLAPI_FALSE='#' HAVE_SHARED_GLAPI_TRUE='' HAVE_SPARC_ASM_FALSE='' HAVE_SPARC_ASM_TRUE='#' HAVE_ST_NINE_FALSE='' HAVE_ST_NINE_TRUE='#' HAVE_ST_OMX_FALSE='' HAVE_ST_OMX_TRUE='#' HAVE_ST_VA_FALSE='' HAVE_ST_VA_TRUE='#' HAVE_ST_VDPAU_FALSE='' HAVE_ST_VDPAU_TRUE='#' HAVE_ST_XA_FALSE='' HAVE_ST_XA_TRUE='#' HAVE_ST_XVMC_FALSE='' HAVE_ST_XVMC_TRUE='#' HAVE_SWRAST_DRI_FALSE='' HAVE_SWRAST_DRI_TRUE='#' HAVE_SWR_AVX2_FALSE='' HAVE_SWR_AVX2_TRUE='#' HAVE_SWR_AVX_FALSE='' HAVE_SWR_AVX_TRUE='#' HAVE_SWR_KNL_FALSE='' HAVE_SWR_KNL_TRUE='#' HAVE_SWR_SKX_FALSE='' HAVE_SWR_SKX_TRUE='#' HAVE_VULKAN_COMMON_FALSE='' HAVE_VULKAN_COMMON_TRUE='#' HAVE_WINDOWSDRI_FALSE='' HAVE_WINDOWSDRI_TRUE='#' HAVE_X86_64_ASM_FALSE='' HAVE_X86_64_ASM_TRUE='#' HAVE_X86_ASM_FALSE='' HAVE_X86_ASM_TRUE='#' HAVE_XF86VIDMODE='' HAVE_XF86VIDMODE_FALSE='' HAVE_XF86VIDMODE_TRUE='#' HAVE_XLIB_GLX_FALSE='' HAVE_XLIB_GLX_TRUE='#' I915_CFLAGS='' I915_LIBS='' INDENT='cat' INDENT_FLAGS='' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' LD='/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ld' LDFLAGS='' LD_NO_UNDEFINED='-Wl,--no-undefined' LEX='flex' LEXLIB='' LEX_OUTPUT_ROOT='lex.yy' LIBATOMIC_LIBS='-latomic' LIBCLC_INCLUDEDIR='' LIBCLC_LIBEXECDIR='' LIBDRM_CFLAGS='-I/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/include -I/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/include/libdrm ' LIBDRM_LIBS='-L/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/lib -ldrm ' LIBELF_CFLAGS='-I/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/include ' LIBELF_LIBS='-L/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/lib -lelf ' LIBGLVND_DATADIR='' LIBOBJS='' LIBS='' LIBSENSORS_LIBS='' LIBTOOL='$(SHELL) $(top_builddir)/libtool' LIBUNWIND_CFLAGS='' LIBUNWIND_LIBS='' LIB_DIR='lib' LIB_EXT='so' LIPO='' LLVM_CFLAGS='' LLVM_CONFIG='no' LLVM_CXXFLAGS='' LLVM_INCLUDEDIR='' LLVM_LDFLAGS='' LLVM_LIBS='' LN_S='ln -s' LTLIBOBJS='' LT_SYS_LIBRARY_PATH='' MAKEINFO='${SHELL} /home/test/autobuild/run/instance-1/output/build/mesa3d-17.2.4/bin/missing makeinfo' MANIFEST_TOOL=':' MKDIR_P='/bin/mkdir -p' MSVC2013_COMPAT_CFLAGS='-Werror=pointer-arith -Werror=vla' MSVC2013_COMPAT_CXXFLAGS='-Werror=pointer-arith -Werror=vla' NEED_GALLIUM_VL_FALSE='#' NEED_GALLIUM_VL_TRUE='' NEED_GALLIUM_VL_WINSYS_FALSE='' NEED_GALLIUM_VL_WINSYS_TRUE='#' NEED_KHRPLATFORM_FALSE='#' NEED_KHRPLATFORM_TRUE='' NEED_LIBMESA_FALSE='' NEED_LIBMESA_TRUE='#' NEED_MEGADRIVER_FALSE='' NEED_MEGADRIVER_TRUE='#' NEED_OPENGL_COMMON_FALSE='#' NEED_OPENGL_COMMON_TRUE='' NEED_RADEON_DRM_WINSYS_FALSE='' NEED_RADEON_DRM_WINSYS_TRUE='#' NEED_WINSYS_XLIB_FALSE='' NEED_WINSYS_XLIB_TRUE='#' NINE_MAJOR='1' NINE_MINOR='0' NINE_TINY='0' NINE_VERSION='1.0.0' NM='/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-nm' NMEDIT='' NOUVEAU_CFLAGS='' NOUVEAU_LIBS='' NVVIEUX_CFLAGS='' NVVIEUX_LIBS='' OBJDUMP='/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-objdump' OBJEXT='o' OMX_CFLAGS='' OMX_LIBS='' OMX_LIB_INSTALL_DIR='' OPENCL_LIBNAME='' OPENCL_VERSION='1' OSMESA_LIB='OSMesa' OSMESA_LIB_DEPS='' OSMESA_PC_LIB_PRIV='' OSMESA_PC_REQ='' OSMESA_VERSION='8' OTOOL64='' OTOOL='' PACKAGE='mesa' PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa' PACKAGE_NAME='Mesa' PACKAGE_STRING='Mesa 17.2.4' PACKAGE_TARNAME='mesa' PACKAGE_URL='' PACKAGE_VERSION='17.2.4' PATH_SEPARATOR=':' PKG_CONFIG='/home/test/autobuild/run/instance-1/output/host/bin/pkg-config' PKG_CONFIG_LIBDIR='' PKG_CONFIG_PATH='' POSIX_SHELL='' PTHREADSTUBS_CFLAGS='' PTHREADSTUBS_LIBS='' PTHREAD_CC='/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc' PTHREAD_CFLAGS='-pthread' PTHREAD_LIBS='-lpthread -pthread' PWR8_CFLAGS='' PYTHON2='python2.7' RADEON_CFLAGS='' RADEON_LIBS='' RANLIB='/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ranlib' RM='rm -f' SED='/bin/sed' SELINUX_CFLAGS='' SELINUX_LIBS='' SET_MAKE='' SHELL='/bin/bash' SIMPENROSE_CFLAGS='' SIMPENROSE_LIBS='' SSE41_CFLAGS='-msse4.1' SSE41_SUPPORTED_FALSE='' SSE41_SUPPORTED_TRUE='#' STRIP='/home/test/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-strip' SWR_AVX2_CXXFLAGS='' SWR_AVX_CXXFLAGS='' SWR_CXX11_CXXFLAGS='' SWR_INVALID_LLVM_VERSION_FALSE='#' SWR_INVALID_LLVM_VERSION_TRUE='' SWR_KNL_CXXFLAGS='' SWR_SKX_CXXFLAGS='' USE_LIBGLVND_FALSE='' USE_LIBGLVND_TRUE='#' USE_VC4_SIMULATOR_FALSE='' USE_VC4_SIMULATOR_TRUE='#' VALGRIND_CFLAGS='-I/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/include/valgrind ' VALGRIND_LIBS='-L/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/lib/valgrind -lcoregrind-ppc32-linux -lvex-ppc32-linux -lgcc ' VA_CFLAGS='' VA_LIBS='' VA_LIB_INSTALL_DIR='${exec_prefix}/lib/dri' VA_MAJOR='' VA_MINOR='' VDPAU_CFLAGS='' VDPAU_LIBS='' VDPAU_LIB_INSTALL_DIR='${libdir}/vdpau' VDPAU_MAJOR='1' VDPAU_MINOR='0' VERSION='17.2.4' VISIBILITY_CFLAGS='-fvisibility=hidden' VISIBILITY_CXXFLAGS='-fvisibility=hidden' VL_CFLAGS='' VL_LIBS='' VULKAN_ICD_INSTALL_DIR='${datarootdir}/vulkan/icd.d' WAYLAND_CFLAGS='-I/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/include ' WAYLAND_LIBS='-L/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/lib -lwayland-client -lwayland-server ' WAYLAND_PROTOCOLS_DATADIR='/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/share/wayland-protocols' WAYLAND_SCANNER='/home/test/autobuild/run/instance-1/output/host/bin/wayland-scanner' WAYLAND_SCANNER_CFLAGS='' WAYLAND_SCANNER_LIBS='' X11_INCLUDES='' XA_MAJOR='2' XA_MINOR='3' XA_TINY='0' XA_VERSION='2.3.0' XCB_DRI2_CFLAGS='' XCB_DRI2_LIBS='' XCB_DRI3_CFLAGS='' XCB_DRI3_LIBS='' XF86VIDMODE_CFLAGS='' XF86VIDMODE_LIBS='' XLIBGL_CFLAGS='' XLIBGL_LIBS='' XVMC_CFLAGS='' XVMC_LIBS='' XVMC_LIB_INSTALL_DIR='${libdir}' XVMC_MAJOR='1' XVMC_MINOR='0' YACC='bison' YFLAGS='' ZLIB_CFLAGS='-I/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/include ' ZLIB_LIBS='-L/home/test/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/lib -lz ' ac_ct_AR='' ac_ct_CC='' ac_ct_CXX='' ac_ct_DUMPBIN='' acv_mako_found='no' am__EXEEXT_FALSE='' am__EXEEXT_TRUE='#' am__fastdepCCAS_FALSE='' am__fastdepCCAS_TRUE='#' am__fastdepCC_FALSE='' am__fastdepCC_TRUE='#' am__fastdepCXX_FALSE='' am__fastdepCXX_TRUE='#' am__include='include' am__isrc='' am__leading_dot='.' am__nodep='' am__quote='' am__tar='tar --format=ustar -chf - "$$tardir"' am__untar='tar -xf -' ax_pthread_config='' bindir='${exec_prefix}/bin' build='x86_64-pc-linux-gnu' build_alias='x86_64-pc-linux-gnu' build_cpu='x86_64' build_os='linux-gnu' build_vendor='pc' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='/usr' host='powerpc-buildroot-linux-gnuspe' host_alias='powerpc-buildroot-linux-gnuspe' host_cpu='powerpc' host_os='linux-gnuspe' host_vendor='buildroot' htmldir='${docdir}' ifGNUmake='' includedir='${prefix}/include' infodir='${datarootdir}/info' install_sh='${SHELL} /home/test/autobuild/run/instance-1/output/build/mesa3d-17.2.4/bin/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='/var' mandir='${datarootdir}/man' mkdir_p='$(MKDIR_P)' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='/usr' program_transform_name='s&^&&' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='/etc' target='powerpc-buildroot-linux-gnuspe' target_alias='powerpc-buildroot-linux-gnuspe' target_cpu='powerpc' target_os='linux-gnuspe' target_vendor='buildroot' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "Mesa" #define PACKAGE_TARNAME "mesa" #define PACKAGE_VERSION "17.2.4" #define PACKAGE_STRING "Mesa 17.2.4" #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=Mesa" #define PACKAGE_URL "" #define PACKAGE "mesa" #define VERSION "17.2.4" #define STDC_HEADERS 1 #define HAVE_SYS_TYPES_H 1 #define HAVE_SYS_STAT_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_MEMORY_H 1 #define HAVE_STRINGS_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_STDINT_H 1 #define HAVE_UNISTD_H 1 #define HAVE_DLFCN_H 1 #define LT_OBJDIR ".libs/" #define HAVE___BUILTIN_BSWAP32 1 #define HAVE___BUILTIN_BSWAP64 1 #define HAVE___BUILTIN_CLZ 1 #define HAVE___BUILTIN_CLZLL 1 #define HAVE___BUILTIN_CTZ 1 #define HAVE___BUILTIN_EXPECT 1 #define HAVE___BUILTIN_FFS 1 #define HAVE___BUILTIN_FFSLL 1 #define HAVE___BUILTIN_POPCOUNT 1 #define HAVE___BUILTIN_POPCOUNTLL 1 #define HAVE___BUILTIN_UNREACHABLE 1 #define HAVE_FUNC_ATTRIBUTE_CONST 1 #define HAVE_FUNC_ATTRIBUTE_FLATTEN 1 #define HAVE_FUNC_ATTRIBUTE_FORMAT 1 #define HAVE_FUNC_ATTRIBUTE_MALLOC 1 #define HAVE_FUNC_ATTRIBUTE_PACKED 1 #define HAVE_FUNC_ATTRIBUTE_PURE 1 #define HAVE_FUNC_ATTRIBUTE_UNUSED 1 #define HAVE_FUNC_ATTRIBUTE_VISIBILITY 1 #define HAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT 1 #define HAVE_FUNC_ATTRIBUTE_WEAK 1 #define HAVE_FUNC_ATTRIBUTE_ALIAS 1 #define MAJOR_IN_SYSMACROS 1 #define HAVE_DLADDR 1 #define HAVE_CLOCK_GETTIME 1 #define HAVE_PTHREAD 1 #define HAVE_VALGRIND 1 configure: exit 0