checking sys/sysinfo.h presence... yes checking for sys/sysinfo.h... yes checking for sysinfo... yes checking for struct sysinfo... yes checking for struct sysinfo.totalram... yes checking for struct sysinfo.mem_unit... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking openssl/aes.h usability... yes checking openssl/aes.h presence... yes checking for openssl/aes.h... yes checking sys/sysctl.h usability... yes checking sys/sysctl.h presence... yes checking for sys/sysctl.h... yes checking for posix_memalign... yes checking for mmap... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking compiler_warnings... yes checking CFLAGS for maximum warnings... -Wall checking for sh... /bin/sh configure: checking POSIX compatibility... WARNING: POSIX violation: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc does not understand -lrt WARNING: POSIX violation: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc does not understand -lxnet WARNING: POSIX violation: clock_gettime() is not linkable ... done checking POSIX compatibility checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls >>> scrypt 1.3.1 Building PATH="/nvmedata/autobuild/instance-28/output-1/host/bin:/nvmedata/autobuild/instance-28/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" /usr/bin/make -j1 -C /nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1/ make[1]: Entering directory '/nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1' ( export CC="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc"; export CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall"; command -p sh ./libcperciva/cpusupport/Build/cpusupport.sh "$PATH") > cpusupport-config.h.tmp && command -p mv cpusupport-config.h.tmp cpusupport-config.h Checking if compiler supports X86 CPUID feature... no Checking if compiler supports X86 CPUID_COUNT feature... no Checking if compiler supports X86 AESNI feature... no Checking if compiler supports X86 RDRAND feature... no Checking if compiler supports X86 SHANI feature... no Checking if compiler supports X86 SSE2 feature... no Checking if compiler supports X86 SSSE3 feature... no /usr/bin/make all-am make[2]: Entering directory '/nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1' /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o main.o main.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o lib/crypto/crypto_scrypt_smix.o lib/crypto/crypto_scrypt_smix.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o lib-platform/crypto/crypto_scrypt.o lib-platform/crypto/crypto_scrypt.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/alg/sha256.o libcperciva/alg/sha256.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/cpusupport/cpusupport_x86_aesni.o libcperciva/cpusupport/cpusupport_x86_aesni.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/cpusupport/cpusupport_x86_rdrand.o libcperciva/cpusupport/cpusupport_x86_rdrand.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/cpusupport/cpusupport_x86_shani.o libcperciva/cpusupport/cpusupport_x86_shani.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/cpusupport/cpusupport_x86_sse2.o libcperciva/cpusupport/cpusupport_x86_sse2.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/cpusupport/cpusupport_x86_ssse3.o libcperciva/cpusupport/cpusupport_x86_ssse3.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/util/insecure_memzero.o libcperciva/util/insecure_memzero.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/util/warnp.o libcperciva/util/warnp.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o lib/scryptenc/scryptenc.o lib/scryptenc/scryptenc.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o lib/scryptenc/scryptenc_cpuperf.o lib/scryptenc/scryptenc_cpuperf.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o lib-platform/util/memlimit.o lib-platform/util/memlimit.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/crypto/crypto_aes.o libcperciva/crypto/crypto_aes.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/crypto/crypto_aesctr.o libcperciva/crypto/crypto_aesctr.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/crypto/crypto_entropy.o libcperciva/crypto/crypto_entropy.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/crypto/crypto_verify_bytes.o libcperciva/crypto/crypto_verify_bytes.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/util/asprintf.o libcperciva/util/asprintf.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/util/entropy.o libcperciva/util/entropy.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/util/getopt.o libcperciva/util/getopt.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/util/humansize.o libcperciva/util/humansize.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/util/monoclock.o libcperciva/util/monoclock.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/util/readpass.o libcperciva/util/readpass.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/util/readpass_file.o libcperciva/util/readpass_file.c /bin/bash ./libtool --tag=CC --mode=compile /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_X86_AESNI}` -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/crypto/aesni_la-crypto_aes_aesni.lo `test -f 'libcperciva/crypto/crypto_aes_aesni.c' || echo './'`libcperciva/crypto/crypto_aes_aesni.c libtool: compile: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c libcperciva/crypto/crypto_aes_aesni.c -fPIC -DPIC -o libcperciva/crypto/.libs/aesni_la-crypto_aes_aesni.o libtool: compile: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c libcperciva/crypto/crypto_aes_aesni.c -o libcperciva/crypto/aesni_la-crypto_aes_aesni.o >/dev/null 2>&1 /bin/bash ./libtool --tag=CC --mode=link /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc `. ./cpusupport-config.h; echo ${CFLAGS_X86_AESNI}` -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -o libcperciva_aesni.la libcperciva/crypto/aesni_la-crypto_aes_aesni.lo -lcrypto libtool: link: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ar cru .libs/libcperciva_aesni.a libcperciva/crypto/.libs/aesni_la-crypto_aes_aesni.o libtool: link: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ranlib .libs/libcperciva_aesni.a libtool: link: ( cd ".libs" && rm -f "libcperciva_aesni.la" && ln -s "../libcperciva_aesni.la" "libcperciva_aesni.la" ) /bin/bash ./libtool --tag=CC --mode=compile /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_X86_RDRAND}` -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/crypto/rdrand_la-crypto_entropy_rdrand.lo `test -f 'libcperciva/crypto/crypto_entropy_rdrand.c' || echo './'`libcperciva/crypto/crypto_entropy_rdrand.c libtool: compile: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c libcperciva/crypto/crypto_entropy_rdrand.c -fPIC -DPIC -o libcperciva/crypto/.libs/rdrand_la-crypto_entropy_rdrand.o libtool: compile: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c libcperciva/crypto/crypto_entropy_rdrand.c -o libcperciva/crypto/rdrand_la-crypto_entropy_rdrand.o >/dev/null 2>&1 /bin/bash ./libtool --tag=CC --mode=link /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc `. ./cpusupport-config.h; echo ${CFLAGS_X86_RDRAND}` -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -o libcperciva_rdrand.la libcperciva/crypto/rdrand_la-crypto_entropy_rdrand.lo -lcrypto libtool: link: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ar cru .libs/libcperciva_rdrand.a libcperciva/crypto/.libs/rdrand_la-crypto_entropy_rdrand.o libtool: link: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ranlib .libs/libcperciva_rdrand.a libtool: link: ( cd ".libs" && rm -f "libcperciva_rdrand.la" && ln -s "../libcperciva_rdrand.la" "libcperciva_rdrand.la" ) /bin/bash ./libtool --tag=CC --mode=compile /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_X86_SHANI} ${CFLAGS_X86_SSSE3}` -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o libcperciva/alg/shani_la-sha256_shani.lo `test -f 'libcperciva/alg/sha256_shani.c' || echo './'`libcperciva/alg/sha256_shani.c libtool: compile: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c libcperciva/alg/sha256_shani.c -fPIC -DPIC -o libcperciva/alg/.libs/shani_la-sha256_shani.o libtool: compile: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c libcperciva/alg/sha256_shani.c -o libcperciva/alg/shani_la-sha256_shani.o >/dev/null 2>&1 /bin/bash ./libtool --tag=CC --mode=link /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc `. ./cpusupport-config.h; echo ${CFLAGS_X86_SHANI} ${CFLAGS_X86_SSSE3}` -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -o libcperciva_shani.la libcperciva/alg/shani_la-sha256_shani.lo -lcrypto libtool: link: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ar cru .libs/libcperciva_shani.a libcperciva/alg/.libs/shani_la-sha256_shani.o libtool: link: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ranlib .libs/libcperciva_shani.a libtool: link: ( cd ".libs" && rm -f "libcperciva_shani.la" && ln -s "../libcperciva_shani.la" "libcperciva_shani.la" ) /bin/bash ./libtool --tag=CC --mode=compile /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_X86_SSE2}` -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o lib/crypto/libscrypt_sse2_la-crypto_scrypt_smix_sse2.lo `test -f 'lib/crypto/crypto_scrypt_smix_sse2.c' || echo './'`lib/crypto/crypto_scrypt_smix_sse2.c libtool: compile: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c lib/crypto/crypto_scrypt_smix_sse2.c -fPIC -DPIC -o lib/crypto/.libs/libscrypt_sse2_la-crypto_scrypt_smix_sse2.o libtool: compile: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c lib/crypto/crypto_scrypt_smix_sse2.c -o lib/crypto/libscrypt_sse2_la-crypto_scrypt_smix_sse2.o >/dev/null 2>&1 /bin/bash ./libtool --tag=CC --mode=link /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc `. ./cpusupport-config.h; echo ${CFLAGS_X86_SSE2}` -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -o libscrypt_sse2.la lib/crypto/libscrypt_sse2_la-crypto_scrypt_smix_sse2.lo -lcrypto libtool: link: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ar cru .libs/libscrypt_sse2.a lib/crypto/.libs/libscrypt_sse2_la-crypto_scrypt_smix_sse2.o libtool: link: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ranlib .libs/libscrypt_sse2.a libtool: link: ( cd ".libs" && rm -f "libscrypt_sse2.la" && ln -s "../libscrypt_sse2.la" "libscrypt_sse2.la" ) /bin/bash ./libtool --tag=CC --mode=link /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -o scrypt main.o lib/crypto/crypto_scrypt_smix.o lib-platform/crypto/crypto_scrypt.o libcperciva/alg/sha256.o libcperciva/cpusupport/cpusupport_x86_aesni.o libcperciva/cpusupport/cpusupport_x86_rdrand.o libcperciva/cpusupport/cpusupport_x86_shani.o libcperciva/cpusupport/cpusupport_x86_sse2.o libcperciva/cpusupport/cpusupport_x86_ssse3.o libcperciva/util/insecure_memzero.o libcperciva/util/warnp.o lib/scryptenc/scryptenc.o lib/scryptenc/scryptenc_cpuperf.o lib-platform/util/memlimit.o libcperciva/crypto/crypto_aes.o libcperciva/crypto/crypto_aesctr.o libcperciva/crypto/crypto_entropy.o libcperciva/crypto/crypto_verify_bytes.o libcperciva/util/asprintf.o libcperciva/util/entropy.o libcperciva/util/getopt.o libcperciva/util/humansize.o libcperciva/util/monoclock.o libcperciva/util/readpass.o libcperciva/util/readpass_file.o libcperciva_aesni.la libcperciva_rdrand.la libcperciva_shani.la libscrypt_sse2.la -lcrypto libtool: link: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -o scrypt main.o lib/crypto/crypto_scrypt_smix.o lib-platform/crypto/crypto_scrypt.o libcperciva/alg/sha256.o libcperciva/cpusupport/cpusupport_x86_aesni.o libcperciva/cpusupport/cpusupport_x86_rdrand.o libcperciva/cpusupport/cpusupport_x86_shani.o libcperciva/cpusupport/cpusupport_x86_sse2.o libcperciva/cpusupport/cpusupport_x86_ssse3.o libcperciva/util/insecure_memzero.o libcperciva/util/warnp.o lib/scryptenc/scryptenc.o lib/scryptenc/scryptenc_cpuperf.o lib-platform/util/memlimit.o libcperciva/crypto/crypto_aes.o libcperciva/crypto/crypto_aesctr.o libcperciva/crypto/crypto_entropy.o libcperciva/crypto/crypto_verify_bytes.o libcperciva/util/asprintf.o libcperciva/util/entropy.o libcperciva/util/getopt.o libcperciva/util/humansize.o libcperciva/util/monoclock.o libcperciva/util/readpass.o libcperciva/util/readpass_file.o ./.libs/libcperciva_aesni.a ./.libs/libcperciva_rdrand.a ./.libs/libcperciva_shani.a ./.libs/libscrypt_sse2.a -lcrypto /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o tests/verify-strings/test_scrypt.o tests/verify-strings/test_scrypt.c /bin/bash ./libtool --tag=CC --mode=link /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -o tests/verify-strings/test_scrypt tests/verify-strings/test_scrypt.o lib/crypto/crypto_scrypt_smix.o lib-platform/crypto/crypto_scrypt.o libcperciva/alg/sha256.o libcperciva/cpusupport/cpusupport_x86_aesni.o libcperciva/cpusupport/cpusupport_x86_rdrand.o libcperciva/cpusupport/cpusupport_x86_shani.o libcperciva/cpusupport/cpusupport_x86_sse2.o libcperciva/cpusupport/cpusupport_x86_ssse3.o libcperciva/util/insecure_memzero.o libcperciva/util/warnp.o libcperciva_shani.la libscrypt_sse2.la -lcrypto libtool: link: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -o tests/verify-strings/test_scrypt tests/verify-strings/test_scrypt.o lib/crypto/crypto_scrypt_smix.o lib-platform/crypto/crypto_scrypt.o libcperciva/alg/sha256.o libcperciva/cpusupport/cpusupport_x86_aesni.o libcperciva/cpusupport/cpusupport_x86_rdrand.o libcperciva/cpusupport/cpusupport_x86_shani.o libcperciva/cpusupport/cpusupport_x86_sse2.o libcperciva/cpusupport/cpusupport_x86_ssse3.o libcperciva/util/insecure_memzero.o libcperciva/util/warnp.o ./.libs/libcperciva_shani.a ./.libs/libscrypt_sse2.a -lcrypto /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -c -o tests/valgrind/potential-memleaks.o tests/valgrind/potential-memleaks.c /bin/bash ./libtool --tag=CC --mode=link /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -o tests/valgrind/potential-memleaks tests/valgrind/potential-memleaks.o -lcrypto libtool: link: /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -o tests/valgrind/potential-memleaks tests/valgrind/potential-memleaks.o -lcrypto make[2]: Leaving directory '/nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1' make[1]: Leaving directory '/nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1' >>> scrypt 1.3.1 Installing to staging directory PATH="/nvmedata/autobuild/instance-28/output-1/host/bin:/nvmedata/autobuild/instance-28/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" /usr/bin/make -j1 DESTDIR=/nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot install -C /nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1/ make[1]: Entering directory '/nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1' /usr/bin/make install-am make[2]: Entering directory '/nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1' make[3]: Entering directory '/nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1' /bin/mkdir -p '/nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin' /bin/bash ./libtool --mode=install /usr/bin/install -c scrypt '/nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin' libtool: install: /usr/bin/install -c scrypt /nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/scrypt /bin/mkdir -p '/nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/share/man/man1' /usr/bin/install -c -m 644 scrypt.1 '/nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/share/man/man1' make[3]: Leaving directory '/nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1' make[2]: Leaving directory '/nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1' make[1]: Leaving directory '/nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1' >>> scrypt 1.3.1 Fixing libtool files for la in $(find /nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/nvmedata/autobuild/instance-28/output-1:@BASE_DIR@:g" \ -e "s:/nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot:@STAGING_DIR@:g" \ \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ \ -e "s:@STAGING_DIR@:/nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot:g" \ -e "s:@BASE_DIR@:/nvmedata/autobuild/instance-28/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> scrypt 1.3.1 Installing to target PATH="/nvmedata/autobuild/instance-28/output-1/host/bin:/nvmedata/autobuild/instance-28/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" /usr/bin/make -j1 DESTDIR=/nvmedata/autobuild/instance-28/output-1/target install -C /nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1/ make[1]: Entering directory '/nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1' /usr/bin/make install-am make[2]: Entering directory '/nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1' make[3]: Entering directory '/nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1' /bin/mkdir -p '/nvmedata/autobuild/instance-28/output-1/target/usr/bin' /bin/bash ./libtool --mode=install /usr/bin/install -c scrypt '/nvmedata/autobuild/instance-28/output-1/target/usr/bin' libtool: install: /usr/bin/install -c scrypt /nvmedata/autobuild/instance-28/output-1/target/usr/bin/scrypt /bin/mkdir -p '/nvmedata/autobuild/instance-28/output-1/target/usr/share/man/man1' /usr/bin/install -c -m 644 scrypt.1 '/nvmedata/autobuild/instance-28/output-1/target/usr/share/man/man1' make[3]: Leaving directory '/nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1' make[2]: Leaving directory '/nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1' make[1]: Leaving directory '/nvmedata/autobuild/instance-28/output-1/build/scrypt-1.3.1' >>> sl 5.02 Downloading wget --passive-ftp -nd -t 3 -O '/nvmedata/autobuild/instance-28/output-1/build/.sl-5.02.tar.gz.EC4t4k/output' 'https://github.com/mtoyoda/sl/archive/5.02/sl-5.02.tar.gz' --2022-06-07 04:08:33-- https://github.com/mtoyoda/sl/archive/5.02/sl-5.02.tar.gz Resolving github.com (github.com)... 140.82.114.4 Connecting to github.com (github.com)|140.82.114.4|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/mtoyoda/sl/tar.gz/refs/tags/5.02 [following] --2022-06-07 04:08:33-- https://codeload.github.com/mtoyoda/sl/tar.gz/refs/tags/5.02 Resolving codeload.github.com (codeload.github.com)... 140.82.113.9 Connecting to codeload.github.com (codeload.github.com)|140.82.113.9|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/x-gzip] Saving to: '/nvmedata/autobuild/instance-28/output-1/build/.sl-5.02.tar.gz.EC4t4k/output' 0K ..... 667K=0.008s 2022-06-07 04:08:33 (667 KB/s) - '/nvmedata/autobuild/instance-28/output-1/build/.sl-5.02.tar.gz.EC4t4k/output' saved [5353] sl-5.02.tar.gz: OK (sha256: 1e5996757f879c81f202a18ad8e982195cf51c41727d3fea4af01fdcbbb5563a) >>> sl 5.02 Extracting gzip -d -c /nvmedata/autobuild/instance-28/dl/sl/sl-5.02.tar.gz | tar --strip-components=1 -C /nvmedata/autobuild/instance-28/output-1/build/sl-5.02 -xf - >>> sl 5.02 Patching >>> sl 5.02 Configuring >>> sl 5.02 Building /usr/bin/make -j1 -C /nvmedata/autobuild/instance-28/output-1/build/sl-5.02 PATH="/nvmedata/autobuild/instance-28/output-1/host/bin:/nvmedata/autobuild/instance-28/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" AR="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ar" AS="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-as" LD="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-ld" NM="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-nm" CC="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" GCC="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" CPP="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-cpp" CXX="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-g++" FC="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gfortran" F77="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gfortran" RANLIB="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ranlib" READELF="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-readelf" STRIP="/bin/true" OBJCOPY="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-objcopy" OBJDUMP="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/nvmedata/autobuild/instance-28/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/nvmedata/autobuild/instance-28/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/nvmedata/autobuild/instance-28/output-1/host/include" LDFLAGS_FOR_BUILD="-L/nvmedata/autobuild/instance-28/output-1/host/lib -Wl,-rpath,/nvmedata/autobuild/instance-28/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-as" DEFAULT_LINKER="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 " LDFLAGS="" FCFLAGS=" -O2 -g0" FFLAGS=" -O2 -g0" PKG_CONFIG="/nvmedata/autobuild/instance-28/output-1/host/bin/pkg-config" STAGING_DIR="/nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no make[1]: Entering directory '/nvmedata/autobuild/instance-28/output-1/build/sl-5.02' /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -o sl sl.c -lncurses make[1]: Leaving directory '/nvmedata/autobuild/instance-28/output-1/build/sl-5.02' >>> sl 5.02 Installing to target /usr/bin/install -m 0755 -D /nvmedata/autobuild/instance-28/output-1/build/sl-5.02/sl /nvmedata/autobuild/instance-28/output-1/target/usr/bin/sl >>> xxhash 0.8.1 Downloading wget --passive-ftp -nd -t 3 -O '/nvmedata/autobuild/instance-28/output-1/build/.xxhash-0.8.1.tar.gz.Tf2b6u/output' 'https://github.com/Cyan4973/xxHash/archive/v0.8.1/xxhash-0.8.1.tar.gz' --2022-06-07 04:08:34-- https://github.com/Cyan4973/xxHash/archive/v0.8.1/xxhash-0.8.1.tar.gz Resolving github.com (github.com)... 140.82.114.4 Connecting to github.com (github.com)|140.82.114.4|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/Cyan4973/xxHash/tar.gz/refs/tags/v0.8.1 [following] --2022-06-07 04:08:34-- https://codeload.github.com/Cyan4973/xxHash/tar.gz/refs/tags/v0.8.1 Resolving codeload.github.com (codeload.github.com)... 140.82.113.9 Connecting to codeload.github.com (codeload.github.com)|140.82.113.9|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 171552 (168K) [application/x-gzip] Saving to: '/nvmedata/autobuild/instance-28/output-1/build/.xxhash-0.8.1.tar.gz.Tf2b6u/output' 0K .......... .......... .......... .......... .......... 29% 488K 0s 50K .......... .......... .......... .......... .......... 59% 974K 0s 100K .......... .......... .......... .......... .......... 89% 5.22M 0s 150K .......... ....... 100% 89.9M=0.2s 2022-06-07 04:08:35 (1.00 MB/s) - '/nvmedata/autobuild/instance-28/output-1/build/.xxhash-0.8.1.tar.gz.Tf2b6u/output' saved [171552/171552] xxhash-0.8.1.tar.gz: OK (sha256: 3bb6b7d6f30c591dd65aaaff1c8b7a5b94d81687998ca9400082c739a690436c) >>> xxhash 0.8.1 Extracting gzip -d -c /nvmedata/autobuild/instance-28/dl/xxhash/xxhash-0.8.1.tar.gz | tar --strip-components=1 -C /nvmedata/autobuild/instance-28/output-1/build/xxhash-0.8.1 -xf - >>> xxhash 0.8.1 Patching Applying 0001-fix-man-page-installation.patch using patch: patching file Makefile Applying 0002-Makefile-add-dedicated-install-targets.patch using patch: patching file Makefile Hunk #1 succeeded at 494 (offset -11 lines). Hunk #2 succeeded at 511 (offset -11 lines). Applying 0003-do-no-longer-depend-on-assert-h-for-XXH_STATIC_ASSERT.patch using patch: patching file xxhash.h Hunk #1 succeeded at 1546 (offset -203 lines). >>> xxhash 0.8.1 Configuring >>> xxhash 0.8.1 Building PATH="/nvmedata/autobuild/instance-28/output-1/host/bin:/nvmedata/autobuild/instance-28/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" PATH="/nvmedata/autobuild/instance-28/output-1/host/bin:/nvmedata/autobuild/instance-28/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" AR="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ar" AS="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-as" LD="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-ld" NM="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-nm" CC="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" GCC="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" CPP="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-cpp" CXX="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-g++" FC="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gfortran" F77="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gfortran" RANLIB="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ranlib" READELF="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-readelf" STRIP="/bin/true" OBJCOPY="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-objcopy" OBJDUMP="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/nvmedata/autobuild/instance-28/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/nvmedata/autobuild/instance-28/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/nvmedata/autobuild/instance-28/output-1/host/include" LDFLAGS_FOR_BUILD="-L/nvmedata/autobuild/instance-28/output-1/host/lib -Wl,-rpath,/nvmedata/autobuild/instance-28/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-as" DEFAULT_LINKER="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 " LDFLAGS="" FCFLAGS=" -O2 -g0" FFLAGS=" -O2 -g0" PKG_CONFIG="/nvmedata/autobuild/instance-28/output-1/host/bin/pkg-config" STAGING_DIR="/nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no /usr/bin/make -j1 -C /nvmedata/autobuild/instance-28/output-1/build/xxhash-0.8.1 xxhsum libxxhash.a libxxhash libxxhash.pc make[1]: Entering directory '/nvmedata/autobuild/instance-28/output-1/build/xxhash-0.8.1' /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -Wextra -Wconversion -Wcast-qual -Wcast-align -Wshadow -Wstrict-aliasing=1 -Wswitch-enum -Wdeclaration-after-statement -Wstrict-prototypes -Wundef -Wpointer-arith -Wformat-security -Wvla -Wformat=2 -Winit-self -Wfloat-equal -Wwrite-strings -Wredundant-decls -Wstrict-overflow=2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o xxhash.o xxhash.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -Wextra -Wconversion -Wcast-qual -Wcast-align -Wshadow -Wstrict-aliasing=1 -Wswitch-enum -Wdeclaration-after-statement -Wstrict-prototypes -Wundef -Wpointer-arith -Wformat-security -Wvla -Wformat=2 -Winit-self -Wfloat-equal -Wwrite-strings -Wredundant-decls -Wstrict-overflow=2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o cli/xxhsum.o cli/xxhsum.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -Wextra -Wconversion -Wcast-qual -Wcast-align -Wshadow -Wstrict-aliasing=1 -Wswitch-enum -Wdeclaration-after-statement -Wstrict-prototypes -Wundef -Wpointer-arith -Wformat-security -Wvla -Wformat=2 -Winit-self -Wfloat-equal -Wwrite-strings -Wredundant-decls -Wstrict-overflow=2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o cli/xsum_os_specific.o cli/xsum_os_specific.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -Wextra -Wconversion -Wcast-qual -Wcast-align -Wshadow -Wstrict-aliasing=1 -Wswitch-enum -Wdeclaration-after-statement -Wstrict-prototypes -Wundef -Wpointer-arith -Wformat-security -Wvla -Wformat=2 -Winit-self -Wfloat-equal -Wwrite-strings -Wredundant-decls -Wstrict-overflow=2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o cli/xsum_output.o cli/xsum_output.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -Wextra -Wconversion -Wcast-qual -Wcast-align -Wshadow -Wstrict-aliasing=1 -Wswitch-enum -Wdeclaration-after-statement -Wstrict-prototypes -Wundef -Wpointer-arith -Wformat-security -Wvla -Wformat=2 -Winit-self -Wfloat-equal -Wwrite-strings -Wredundant-decls -Wstrict-overflow=2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o cli/xsum_sanity_check.o cli/xsum_sanity_check.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -Wextra -Wconversion -Wcast-qual -Wcast-align -Wshadow -Wstrict-aliasing=1 -Wswitch-enum -Wdeclaration-after-statement -Wstrict-prototypes -Wundef -Wpointer-arith -Wformat-security -Wvla -Wformat=2 -Winit-self -Wfloat-equal -Wwrite-strings -Wredundant-decls -Wstrict-overflow=2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o cli/xsum_bench.o cli/xsum_bench.c /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -Wextra -Wconversion -Wcast-qual -Wcast-align -Wshadow -Wstrict-aliasing=1 -Wswitch-enum -Wdeclaration-after-statement -Wstrict-prototypes -Wundef -Wpointer-arith -Wformat-security -Wvla -Wformat=2 -Winit-self -Wfloat-equal -Wwrite-strings -Wredundant-decls -Wstrict-overflow=2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 xxhash.o cli/xxhsum.o cli/xsum_os_specific.o cli/xsum_output.o cli/xsum_sanity_check.o cli/xsum_bench.o -o xxhsum /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ar rcs libxxhash.a xxhash.o /nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -Wall -Wextra -Wconversion -Wcast-qual -Wcast-align -Wshadow -Wstrict-aliasing=1 -Wswitch-enum -Wdeclaration-after-statement -Wstrict-prototypes -Wundef -Wpointer-arith -Wformat-security -Wvla -Wformat=2 -Winit-self -Wfloat-equal -Wwrite-strings -Wredundant-decls -Wstrict-overflow=2 -fPIC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 xxhash.c -shared -Wl,-soname=libxxhash.so.0 -o libxxhash.so.0.8.1 ln -sf libxxhash.so.0.8.1 libxxhash.so.0 ln -sf libxxhash.so.0.8.1 libxxhash.so creating pkgconfig make[1]: Leaving directory '/nvmedata/autobuild/instance-28/output-1/build/xxhash-0.8.1' >>> xxhash 0.8.1 Installing to staging directory PATH="/nvmedata/autobuild/instance-28/output-1/host/bin:/nvmedata/autobuild/instance-28/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" PATH="/nvmedata/autobuild/instance-28/output-1/host/bin:/nvmedata/autobuild/instance-28/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" AR="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ar" AS="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-as" LD="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-ld" NM="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-nm" CC="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" GCC="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" CPP="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-cpp" CXX="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-g++" FC="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gfortran" F77="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gfortran" RANLIB="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ranlib" READELF="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-readelf" STRIP="/bin/true" OBJCOPY="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-objcopy" OBJDUMP="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/nvmedata/autobuild/instance-28/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/nvmedata/autobuild/instance-28/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/nvmedata/autobuild/instance-28/output-1/host/include" LDFLAGS_FOR_BUILD="-L/nvmedata/autobuild/instance-28/output-1/host/lib -Wl,-rpath,/nvmedata/autobuild/instance-28/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-as" DEFAULT_LINKER="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 " LDFLAGS="" FCFLAGS=" -O2 -g0" FFLAGS=" -O2 -g0" PKG_CONFIG="/nvmedata/autobuild/instance-28/output-1/host/bin/pkg-config" STAGING_DIR="/nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no /usr/bin/make -j1 -C /nvmedata/autobuild/instance-28/output-1/build/xxhash-0.8.1 PREFIX=/usr DESTDIR=/nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot install_xxhsum install_libxxhash.a install_libxxhash install_libxxhash.pc make[1]: Entering directory '/nvmedata/autobuild/instance-28/output-1/build/xxhash-0.8.1' Installing xxhsum Installing libxxhash.a Installing libxxhash Installing pkgconfig make[1]: Leaving directory '/nvmedata/autobuild/instance-28/output-1/build/xxhash-0.8.1' >>> xxhash 0.8.1 Fixing libtool files for la in $(find /nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/nvmedata/autobuild/instance-28/output-1:@BASE_DIR@:g" \ -e "s:/nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot:@STAGING_DIR@:g" \ \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ \ -e "s:@STAGING_DIR@:/nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot:g" \ -e "s:@BASE_DIR@:/nvmedata/autobuild/instance-28/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> xxhash 0.8.1 Installing to target PATH="/nvmedata/autobuild/instance-28/output-1/host/bin:/nvmedata/autobuild/instance-28/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" PATH="/nvmedata/autobuild/instance-28/output-1/host/bin:/nvmedata/autobuild/instance-28/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" AR="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ar" AS="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-as" LD="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-ld" NM="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-nm" CC="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" GCC="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" CPP="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-cpp" CXX="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-g++" FC="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gfortran" F77="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gfortran" RANLIB="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ranlib" READELF="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-readelf" STRIP="/bin/true" OBJCOPY="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-objcopy" OBJDUMP="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/nvmedata/autobuild/instance-28/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/nvmedata/autobuild/instance-28/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/nvmedata/autobuild/instance-28/output-1/host/include" LDFLAGS_FOR_BUILD="-L/nvmedata/autobuild/instance-28/output-1/host/lib -Wl,-rpath,/nvmedata/autobuild/instance-28/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-as" DEFAULT_LINKER="/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 " LDFLAGS="" FCFLAGS=" -O2 -g0" FFLAGS=" -O2 -g0" PKG_CONFIG="/nvmedata/autobuild/instance-28/output-1/host/bin/pkg-config" STAGING_DIR="/nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no /usr/bin/make -j1 -C /nvmedata/autobuild/instance-28/output-1/build/xxhash-0.8.1 PREFIX=/usr DESTDIR=/nvmedata/autobuild/instance-28/output-1/target install_xxhsum install_libxxhash.a install_libxxhash install_libxxhash.pc make[1]: Entering directory '/nvmedata/autobuild/instance-28/output-1/build/xxhash-0.8.1' Installing xxhsum Installing libxxhash.a Installing libxxhash Installing pkgconfig make[1]: Leaving directory '/nvmedata/autobuild/instance-28/output-1/build/xxhash-0.8.1' >>> Finalizing host directory >>> Finalizing target directory mkdir -p /nvmedata/autobuild/instance-28/output-1/host/etc/meson sed -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_LDFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0'@PKG_TARGET_CXXFLAGS@%g" -e "s%@TARGET_CC@%/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc%g" -e "s%@TARGET_CXX@%/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-g++%g" -e "s%@TARGET_AR@%/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ar%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%ppc%g" -e "s%@TARGET_CPU@%7400%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_CFLAGS@%%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%%g" -e "s%@BR2_CMAKE@%/nvmedata/autobuild/instance-28/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/nvmedata/autobuild/instance-28/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/nvmedata/autobuild/instance-28/output-1/host%g" -e "s%@STAGING_DIR@%/nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot%g" -e "s%@STATIC@%false%g" /nvmedata/autobuild/instance-28/buildroot/support/misc/cross-compilation.conf.in > /nvmedata/autobuild/instance-28/output-1/host/etc/meson/cross-compilation.conf.in sed -e "s%@TARGET_CC@%/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc%g" -e "s%@TARGET_CXX@%/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-g++%g" -e "s%@TARGET_AR@%/nvmedata/autobuild/instance-28/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc-ar%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%ppc%g" -e "s%@TARGET_CPU@%7400%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0'%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0'%g" -e "s%@BR2_CMAKE@%/nvmedata/autobuild/instance-28/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/nvmedata/autobuild/instance-28/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/nvmedata/autobuild/instance-28/output-1/host%g" -e "s%@STAGING_DIR@%/nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot%g" -e "s%@STATIC@%false%g" /nvmedata/autobuild/instance-28/buildroot/support/misc/cross-compilation.conf.in > /nvmedata/autobuild/instance-28/output-1/host/etc/meson/cross-compilation.conf /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 #~' /nvmedata/autobuild/instance-28/output-1/target/etc/inittab /bin/sed -i -e '/^[^#].*-o remount,rw \/$/s~^~#~' /nvmedata/autobuild/instance-28/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /nvmedata/autobuild/instance-28/output-1/build/busybox-1.35.0/.config; then grep -qsE '^/bin/ash$' /nvmedata/autobuild/instance-28/output-1/target/etc/shells || echo "/bin/ash" >> /nvmedata/autobuild/instance-28/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /nvmedata/autobuild/instance-28/output-1/build/busybox-1.35.0/.config; then grep -qsE '^/bin/hush$' /nvmedata/autobuild/instance-28/output-1/target/etc/shells || echo "/bin/hush" >> /nvmedata/autobuild/instance-28/output-1/target/etc/shells; fi mkdir -p /nvmedata/autobuild/instance-28/output-1/target/etc echo "buildroot" > /nvmedata/autobuild/instance-28/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /nvmedata/autobuild/instance-28/output-1/target/etc/hosts mkdir -p /nvmedata/autobuild/instance-28/output-1/target/etc echo "Welcome to Buildroot" > /nvmedata/autobuild/instance-28/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root:"*":, /nvmedata/autobuild/instance-28/output-1/target/etc/shadow grep -qsE '^/bin/sh$' /nvmedata/autobuild/instance-28/output-1/target/etc/shells || echo "/bin/sh" >> /nvmedata/autobuild/instance-28/output-1/target/etc/shells if [ -x /nvmedata/autobuild/instance-28/output-1/target/sbin/swapon -a -x /nvmedata/autobuild/instance-28/output-1/target/sbin/swapoff ]; then /bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /nvmedata/autobuild/instance-28/output-1/target/etc/inittab; else /bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /nvmedata/autobuild/instance-28/output-1/target/etc/inittab; fi rm -rf /nvmedata/autobuild/instance-28/output-1/target/usr/include /nvmedata/autobuild/instance-28/output-1/target/usr/share/aclocal \ /nvmedata/autobuild/instance-28/output-1/target/usr/lib/pkgconfig /nvmedata/autobuild/instance-28/output-1/target/usr/share/pkgconfig \ /nvmedata/autobuild/instance-28/output-1/target/usr/lib/cmake /nvmedata/autobuild/instance-28/output-1/target/usr/share/cmake \ /nvmedata/autobuild/instance-28/output-1/target/usr/doc find /nvmedata/autobuild/instance-28/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /nvmedata/autobuild/instance-28/output-1/target/lib/ /nvmedata/autobuild/instance-28/output-1/target/usr/lib/ /nvmedata/autobuild/instance-28/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f find: '/nvmedata/autobuild/instance-28/output-1/target/usr/libexec/': No such file or directory rm -rf /nvmedata/autobuild/instance-28/output-1/target/usr/share/gdb rm -rf /nvmedata/autobuild/instance-28/output-1/target/usr/share/bash-completion rm -rf /nvmedata/autobuild/instance-28/output-1/target/etc/bash_completion.d rm -rf /nvmedata/autobuild/instance-28/output-1/target/usr/share/zsh rm -rf /nvmedata/autobuild/instance-28/output-1/target/usr/man /nvmedata/autobuild/instance-28/output-1/target/usr/share/man rm -rf /nvmedata/autobuild/instance-28/output-1/target/usr/info /nvmedata/autobuild/instance-28/output-1/target/usr/share/info rm -rf /nvmedata/autobuild/instance-28/output-1/target/usr/doc /nvmedata/autobuild/instance-28/output-1/target/usr/share/doc rm -rf /nvmedata/autobuild/instance-28/output-1/target/usr/share/gtk-doc rmdir /nvmedata/autobuild/instance-28/output-1/target/usr/share 2>/dev/null || true rm -rf /nvmedata/autobuild/instance-28/output-1/target/lib/debug /nvmedata/autobuild/instance-28/output-1/target/usr/lib/debug find /nvmedata/autobuild/instance-28/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /bin/true 2>/dev/null || true find /nvmedata/autobuild/instance-28/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /bin/true 2>/dev/null || true test -f /nvmedata/autobuild/instance-28/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /nvmedata/autobuild/instance-28/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /nvmedata/autobuild/instance-28/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2022.05-rc2-81-g487ac12ff9"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2022.05"; \ echo "PRETTY_NAME=\"Buildroot 2022.05\"" \ ) > /nvmedata/autobuild/instance-28/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /nvmedata/autobuild/instance-28/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/nvmedata/autobuild/instance-28/output-1/per-package /nvmedata/autobuild/instance-28/buildroot/support/scripts/fix-rpath target touch /nvmedata/autobuild/instance-28/output-1/target/usr ln -snf /nvmedata/autobuild/instance-28/output-1/host/powerpc-buildroot-linux-uclibc/sysroot /nvmedata/autobuild/instance-28/output-1/staging make: Leaving directory '/nvmedata/autobuild/instance-28/buildroot' make: Entering directory '/nvmedata/autobuild/instance-28/buildroot' >>> Buildroot 2022.05-rc2-81-g487ac12ff9 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> host-android-tools 4.2.2+git20130218 Collecting legal info debian/copyright: OK (sha256: 170c5939bf8c8eed1db8f66f2d6155e8c1a3e799e390b55e7aad253195b1ebf5) >>> host-openssl Collecting legal info >>> host-libopenssl 1.1.1o Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> host-skeleton Collecting legal info >>> host-zlib Collecting legal info >>> host-libzlib 1.2.12 Collecting legal info README: OK (sha256: fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> busybox 1.35.0 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f) >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain Collecting legal info >>> toolchain-buildroot Collecting legal info >>> host-gcc-final 10.3.0 Collecting legal info >>> host-binutils 2.37 Collecting legal info COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: 56bdea73b6145ef6ac5259b3da390b981d840c24cb03b8e1cbc678de7ecfa18d) >>> host-gmp 6.2.1 Collecting legal info COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-m4 1.4.19 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-mpc 1.2.1 Collecting legal info COPYING.LESSER: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) >>> host-mpfr 4.1.0 Collecting legal info COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118) >>> uclibc 1.0.41 Collecting legal info COPYING.LIB: OK (sha256: 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3) >>> host-gcc-initial 10.3.0 Collecting legal info >>> linux-headers 5.17.13 Collecting legal info COPYING: OK (sha256: fb5a425bd3b3cd6071a3a9aff9909a859e7c1158d54d32e07658398cd67eb6a0) LICENSES/preferred/GPL-2.0: OK (sha256: f6b78c087c3ebdf0f3c13415070dd480a3f35d8fc76f3d02180a407c1c812f79) LICENSES/exceptions/Linux-syscall-note: OK (sha256: 8e378ab93586eb55135d3bc119cce787f7324f48394777d00c34fa3d0be3303f) >>> util-linux 2.38 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> ncurses 6.1 Collecting legal info COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87) >>> host-ncurses 6.1 Collecting legal info COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87) >>> zlib Collecting legal info >>> zlib-ng 2.0.6 Collecting legal info LICENSE.md: OK (sha256: d3c80be055d94d798eaa786116e84fa0b010bc11420b5d2060d978ea77845436) >>> host-cmake 3.18.6 Collecting legal info Copyright.txt: OK (sha256: 131b9ff756b64a25b7461c3c1382e70b16c70a5b4833a1577897fa3ea6d88f8d) >>> bzip2 1.0.8 Collecting legal info LICENSE: OK (sha256: c6dbbf828498be844a89eaa3b84adbab3199e342eb5cb2ed2f0d4ba7ec0f38a3) >>> host-checksec 2.5.0 Collecting legal info LICENSE.txt: OK (sha256: 7888fee828bf56d547fc1f634e40638984148b4fc41373b7626eb465060640de) >>> dmalloc 5.6.5 Collecting legal info LICENSE.txt: OK (sha256: 8657f6bc5ebb765dd792b2c3c54d5dc37b8b4e6bbe8aa48d464fd92081b1e720) >>> erofs-utils 1.4 Collecting legal info COPYING: OK (sha256: feee3b3157dcdf78d4f50edefbd5dd7adf8b6d52c11bfaaa746a85a373256713) >>> host-autoconf 2.71 Collecting legal info COPYINGv3: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) COPYING.EXCEPTION: OK (sha256: 1f1cde9fb68b9b3cff18c420894bec5bd4defacd700b7d13df54a887301e5350) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-automake 1.16.5 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> lz4 1.9.3 Collecting legal info lib/LICENSE: OK (sha256: d15d99c8dc6b0ec22174c0e563a95bc40f9363ca7f9d9d793bb5c5a8e8d0af71) programs/COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> initscripts Collecting legal info >>> jquery 3.5.1 Collecting legal info >>> libargon2 20190702 Collecting legal info LICENSE: OK (sha256: 220f8736a89ff51c92ef3d497f413b48e6cf1df3d6278bc909c6308c78e1718e) >>> libmaxminddb 1.6.0 Collecting legal info LICENSE: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) >>> libmhash 0.9.9.9 Collecting legal info COPYING: OK (sha256: d245807f90032872d1438d741ed21e2490e1175dc8aa3afa5ddb6c8e529b58e5) >>> libmnl 1.0.5 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libmpdclient 2.20 Collecting legal info COPYING: OK (sha256: 9574c3b0a9c31723cc3d5f32af4655a015fff5ec6ec8115b7906cd7d9623cf32) >>> host-meson 0.62.1 Collecting legal info COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) >>> host-ninja 1.10.2.g51db2.kitware.jobserver-1 Collecting legal info COPYING: OK (sha256: eb7e9ab9690124c5c9f42bdc81383d886a3dede26345b6ed15bbad7caf81f7ea) >>> host-python-setuptools 62.1.0 Collecting legal info LICENSE: OK (sha256: db3f0246b1f9278f15845b99fec478b8b506eb76487993722f8c6e254285faf8) >>> host-python3 3.10.4 Collecting legal info LICENSE: OK (sha256: f03e17cd594c2085f66a454e695c7ebe5b4d3c0eff534f4f194abc2fd164621b) >>> host-autoconf-archive 2021.02.19 Collecting legal info COPYING: OK (sha256: e6037104443f9a7829b2aa7c5370d0789a7bda3ca65a0b904cdc0c2e285d9195) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-expat 2.4.7 Collecting legal info COPYING: OK (sha256: 8c6b5b6de8fae20b317f4992729abc0e520bfba4c7606cd1e9eeb87418eebdec) >>> host-libffi 3.4.2 Collecting legal info LICENSE: OK (sha256: a61d06e8f7be57928e71e800eb9273b05cb8868c484108afe41e4305bb320dde) >>> libnetfilter_acct 1.0.3 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libopenssl 1.1.1o Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> libtelnet 0.23 Collecting legal info COPYING: OK (sha256: b1faf309467bc1d0aab9b42d6e86a614e78f8fe3580e289966b5b9f9a8f94d99) >>> libuev 2.4.0 Collecting legal info LICENSE: OK (sha256: 694a734d9c1b46ae203314ed1c744a1acebd4fe5fc964b761703772546f0d3ab) >>> host-lttng-babeltrace 1.5.7 Collecting legal info mit-license.txt: OK (sha256: 2f801b7c2494850c3d91da820eb230502dc0192c9d0db024db37ec08d0be1434) gpl-2.0.txt: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) LICENSE: OK (sha256: 12d4222ac628fe4092cba8ed90bc5227a4dedd0b94973273cecbc393325bf1c2) >>> host-elfutils 0.186 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING-GPLV2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING-LGPLV3: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) >>> host-bzip2 1.0.8 Collecting legal info LICENSE: OK (sha256: c6dbbf828498be844a89eaa3b84adbab3199e342eb5cb2ed2f0d4ba7ec0f38a3) >>> host-xz 5.2.5 Collecting legal info COPYING: OK (sha256: bcb02973ef6e87ea73d331b3a80df7748407f17efdb784b61b47e0e610d3bb5c) COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.GPLv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-libglib2 2.70.4 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-gettext Collecting legal info >>> host-gettext-tiny 0.3.2 Collecting legal info LICENSE: OK (sha256: 4c938aa3d8fa3c184bba5e87a8a2febc89560627c9d0567536879e3eca1a7b4f) extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> host-pcre 8.45 Collecting legal info LICENCE: OK (sha256: 51b3dea44f63338b84b9c97b3d793826a8397309068cf9379a423216ab8ea5b2) >>> host-util-linux 2.38 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-popt 1.18 Collecting legal info COPYING: OK (sha256: 518d4f2a05064cb9a8ec0ea02e86408af4feed6916f78ef42171465db8b383c5) >>> macchanger 1.7.0 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-mkpasswd Collecting legal info >>> mpd-mpc 0.34 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> nfacct 1.0.2 Collecting legal info COPYING: OK (sha256: 91df39d1816bfb17a4dda2d3d2c83b1f6f2d38d53e53e41e8f97ad5ac46a0cad) >>> oniguruma 6.9.8 Collecting legal info COPYING: OK (sha256: 70ba5469ea0bab6e18a32d7009068f996503168d27be57747e08da34337ff26f) >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> rcw-smarc-sal28 11 Collecting legal info COPYING: OK (sha256: 803c65088eed36a6697ca9f03f4379bbad24e276dc8da7fef5eb4dc4008415a1) >>> scrypt 1.3.1 Collecting legal info COPYRIGHT: OK (sha256: 1fb4da0e9000287414066a238f378528d5652f89b72b4a1d6b89fdd20031b22d) >>> openssl Collecting legal info >>> sl 5.02 Collecting legal info LICENSE: OK (sha256: 72c7d262e2c9ddf019edc90af852a01a410338efff4e75e1c005b77ada4be7c4) >>> xxhash 0.8.1 Collecting legal info LICENSE: OK (sha256: 553d0035773ddd1590045f8fdc3a4c6ead31e36336721aeca8421e88ed1c9f80) cli/COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) WARNING: the Buildroot source code has not been saved WARNING: gcc-final-10.3.0: cannot save license (HOST_GCC_FINAL_LICENSE_FILES not defined) WARNING: gcc-initial-10.3.0: cannot save license (HOST_GCC_INITIAL_LICENSE_FILES not defined) WARNING: jquery-3.5.1: cannot save license (JQUERY_LICENSE_FILES not defined) Legal info produced in /nvmedata/autobuild/instance-28/output-1/legal-info make: Leaving directory '/nvmedata/autobuild/instance-28/buildroot'