If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45/lib' make[2]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45/lib' Making install in src make[2]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45/src' make[3]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45/src' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-3/output-1/host/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c sg_bg_ctl sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_elem_status sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_seek sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_stream_ctl sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_write_x sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/home/buildroot/autobuild/instance-3/output-1/host/bin' libtool: install: /usr/bin/install -c sg_bg_ctl /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_bg_ctl libtool: install: /usr/bin/install -c sg_compare_and_write /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_compare_and_write libtool: install: /usr/bin/install -c sg_decode_sense /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_decode_sense libtool: install: /usr/bin/install -c sg_format /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_format libtool: install: /usr/bin/install -c sg_get_config /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_get_config libtool: install: /usr/bin/install -c sg_get_elem_status /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_get_elem_status libtool: install: /usr/bin/install -c sg_get_lba_status /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_get_lba_status libtool: install: /usr/bin/install -c sg_ident /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_ident libtool: install: /usr/bin/install -c sg_inq /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_inq libtool: install: /usr/bin/install -c sg_logs /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_logs libtool: install: /usr/bin/install -c sg_luns /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_luns libtool: install: /usr/bin/install -c sg_modes /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rep_zones /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_identify /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_seek /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_seek libtool: install: /usr/bin/install -c sg_senddiag /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_stpg libtool: install: /usr/bin/install -c sg_stream_ctl /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_stream_ctl libtool: install: /usr/bin/install -c sg_sync /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_buffer /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_write_x /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_write_x libtool: install: /usr/bin/install -c sg_zone /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_zone libtool: install: /usr/bin/install -c sg_copy_results /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/buildroot/autobuild/instance-3/output-1/host/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/buildroot/autobuild/instance-3/output-1/host/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/buildroot/autobuild/instance-3/output-1/host/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/buildroot/autobuild/instance-3/output-1/host/bin/sgp_dd make[3]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45/src' make[2]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45/src' Making install in doc make[2]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45/doc' make[3]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-3/output-1/host/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_elem_status.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 '/home/buildroot/autobuild/instance-3/output-1/host/share/man/man8' /usr/bin/install -c -m 644 sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/buildroot/autobuild/instance-3/output-1/host/share/man/man8' make[3]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45/doc' make[2]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45/doc' Making install in scripts make[2]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45/scripts' make[3]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-3/output-1/host/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/buildroot/autobuild/instance-3/output-1/host/bin' make[3]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45/scripts' make[2]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45/scripts' make[2]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45' make[3]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45' make[2]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45' make[1]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-sg3_utils-1.45' utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6.tar.gz: OK (sha256: 8b5ba0058a78de69faf6822bb10b457fff2f9e55dc112ccb81c35214b061c6e6) >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Extracting gzip -d -c /home/buildroot/autobuild/instance-3/dl/utp_com/utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-3/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6 -xf - >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Patching >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Configuring >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Building PATH="/home/buildroot/autobuild/instance-3/output-1/host/bin:/home/buildroot/autobuild/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PKG_CONFIG="/home/buildroot/autobuild/instance-3/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/autobuild/instance-3/output-1/host/lib/pkgconfig:/home/buildroot/autobuild/instance-3/output-1/host/share/pkgconfig" AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld" NM="/usr/bin/nm" CC="/usr/bin/gcc" GCC="/usr/bin/gcc" CXX="/usr/bin/g++" CPP="/usr/bin/cpp" OBJCOPY="/usr/bin/objcopy" RANLIB="/usr/bin/ranlib" CPPFLAGS="-I/home/buildroot/autobuild/instance-3/output-1/host/include" CFLAGS="-O2 -I/home/buildroot/autobuild/instance-3/output-1/host/include" CXXFLAGS="-O2 -I/home/buildroot/autobuild/instance-3/output-1/host/include" LDFLAGS="-L/home/buildroot/autobuild/instance-3/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-3/output-1/host/lib" INTLTOOL_PERL=/usr/bin/perl /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-3/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6 make[1]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6' /usr/bin/gcc -c -o utp_com.o utp_com.c -O2 -I/home/buildroot/autobuild/instance-3/output-1/host/include /usr/bin/gcc -o utp_com utp_com.o -L/home/buildroot/autobuild/instance-3/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-3/output-1/host/lib make[1]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6' >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Installing to host directory /usr/bin/install -D -m 755 /home/buildroot/autobuild/instance-3/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6/utp_com /home/buildroot/autobuild/instance-3/output-1/host/bin/utp_com wavemon-0.9.1.tar.gz: OK (sha256: 5ebd5b79d3b7c546bc16b95161872c699a75e9acdfc6e3f02ec48dad10802067) >>> wavemon 0.9.1 Extracting gzip -d -c /home/buildroot/autobuild/instance-3/dl/wavemon/wavemon-0.9.1.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-3/output-1/build/wavemon-0.9.1 -xf - >>> wavemon 0.9.1 Patching >>> wavemon 0.9.1 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/buildroot/autobuild/instance-3/output-1/build/wavemon-0.9.1 -name $file); do cp support/gnuconfig/$file $i; done; done >>> wavemon 0.9.1 Patching libtool >>> wavemon 0.9.1 Configuring (cd /home/buildroot/autobuild/instance-3/output-1/build/wavemon-0.9.1/ && rm -rf config.cache && PATH="/home/buildroot/autobuild/instance-3/output-1/host/bin:/home/buildroot/autobuild/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" AR="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-ar" AS="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-as" LD="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-ld" NM="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-nm" CC="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-gcc" GCC="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-gcc" CPP="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-cpp" CXX="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-g++" FC="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-gfortran" F77="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-gfortran" RANLIB="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-ranlib" READELF="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-readelf" STRIP="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-strip" OBJCOPY="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-objcopy" OBJDUMP="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/instance-3/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-3/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-3/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/instance-3/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-3/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-as" DEFAULT_LINKER="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -Wl,-elf2flt -static" CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -Wl,-elf2flt -static -Wl,-elf2flt -static" LDFLAGS=" -Wl,-elf2flt -static" FCFLAGS=" -O2 -Wl,-elf2flt -static" FFLAGS=" -O2 -Wl,-elf2flt -static" PKG_CONFIG="/home/buildroot/autobuild/instance-3/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/instance-3/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CONFIG_SITE=/dev/null ./configure --target=arm-buildroot-uclinux-uclibcgnueabi --host=arm-buildroot-uclinux-uclibcgnueabi --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --enable-static --disable-shared ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --disable-dependency-tracking, --enable-ipv6, --disable-nls, --enable-static, --disable-shared checking build system type... x86_64-pc-linux-gnu checking host system type... arm-buildroot-uclinux-uclibcgnueabi checking for arm-buildroot-uclinux-uclibcgnueabi-gcc... /home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-gcc accepts -g... yes checking for /home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-gcc option to accept ISO C89... none needed checking how to run the C preprocessor... /home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-cpp checking for a BSD-compatible install... /usr/bin/install -c checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking whether time.h and sys/time.h may both be included... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking ncurses.h usability... yes checking ncurses.h presence... yes checking for ncurses.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking net/if_arp.h usability... yes checking net/if_arp.h presence... yes checking for net/if_arp.h... yes checking netinet/ether.h usability... yes checking netinet/ether.h presence... yes checking for netinet/ether.h... yes checking net/ethernet.h usability... yes checking net/ethernet.h presence... yes checking for net/ethernet.h... yes checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking for sys/socket.h... yes checking for linux/if.h... yes checking for linux/wireless.h... yes checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for pow in -lm... yes checking for waddstr in -lncurses... yes checking for pthread_create in -lpthread... yes checking for cap_get_flag in -lcap... no checking for gettimeofday... yes checking for ether_ntohost... yes checking pkg-config is at least version 0.9.0... yes checking for LIBNL3... yes checking for LIBNL3_GENL... yes checking whether /home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-gcc needs -traditional... no checking for an ANSI C-conforming const... yes checking for inline... inline configure: creating ./config.status config.status: creating Makefile configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --disable-dependency-tracking, --enable-ipv6, --disable-nls, --enable-static, --disable-shared >>> wavemon 0.9.1 Building PATH="/home/buildroot/autobuild/instance-3/output-1/host/bin:/home/buildroot/autobuild/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 CC="/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-gcc" -C /home/buildroot/autobuild/instance-3/output-1/build/wavemon-0.9.1/ make[1]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/wavemon-0.9.1' CC conf_scr.c CC about_scr.c CC conf.c CC error.c CC help_scr.c CC info_scr.c CC iw_if.c CC iw_nl80211.c CC iw_scan.c CC lhist_scr.c CC llist.c CC scan_scr.c CC ui.c CC utils.c /home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-gcc -O2 -Wall -pthread -I/home/buildroot/autobuild/instance-3/output-1/host/bin/../arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/include/libnl3 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-elf2flt -static wavemon.c about_scr.o conf.o conf_scr.o error.o help_scr.o info_scr.o iw_if.o iw_nl80211.o iw_scan.o lhist_scr.o llist.o scan_scr.o ui.o utils.o -lncurses -lm -L/home/buildroot/autobuild/instance-3/output-1/host/bin/../arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib -lnl-genl-3 -lnl-3 -lpthread -L/home/buildroot/autobuild/instance-3/output-1/host/bin/../arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib -lnl-3 -lpthread -o wavemon make[1]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/wavemon-0.9.1' >>> wavemon 0.9.1 Installing to target PATH="/home/buildroot/autobuild/instance-3/output-1/host/bin:/home/buildroot/autobuild/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-3/output-1/target install -C /home/buildroot/autobuild/instance-3/output-1/build/wavemon-0.9.1/ make[1]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/wavemon-0.9.1' /usr/bin/install -c -m 0755 -d /home/buildroot/autobuild/instance-3/output-1/target/usr/bin /usr/bin/install -c -m 0755 wavemon /home/buildroot/autobuild/instance-3/output-1/target/usr/bin /usr/bin/install -c -m 0755 -d /home/buildroot/autobuild/instance-3/output-1/target/usr/share/man/man1 /usr/bin/install -c -m 0644 wavemon.1 /home/buildroot/autobuild/instance-3/output-1/target/usr/share/man/man1 /usr/bin/install -c -m 0755 -d /home/buildroot/autobuild/instance-3/output-1/target/usr/share/man/man5 /usr/bin/install -c -m 0644 wavemonrc.5 /home/buildroot/autobuild/instance-3/output-1/target/usr/share/man/man5 /usr/bin/install -c -m 0755 -d /home/buildroot/autobuild/instance-3/output-1/target/usr/share/wavemon /usr/bin/install -c -m 0644 README.md NEWS THANKS AUTHORS COPYING ChangeLog /home/buildroot/autobuild/instance-3/output-1/target/usr/share/wavemon make[1]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/wavemon-0.9.1' v14.1_Firmware.zip: OK (sha256: a2e7a327dd545ba2051946f7613005cbde88fdd952afb8eecdd1dacda7e767d2) >>> wilc1000-firmware 14.1 Extracting /usr/bin/unzip -q -d /home/buildroot/autobuild/instance-3/output-1/build /home/buildroot/autobuild/instance-3/dl/wilc1000-firmware/v14.1_Firmware.zip mv /home/buildroot/autobuild/instance-3/output-1/build/wireless-firmware-14.1_Firmware/* /home/buildroot/autobuild/instance-3/output-1/build/wilc1000-firmware-14.1 rmdir /home/buildroot/autobuild/instance-3/output-1/build/wireless-firmware-14.1_Firmware >>> wilc1000-firmware 14.1 Patching >>> wilc1000-firmware 14.1 Configuring >>> wilc1000-firmware 14.1 Building >>> wilc1000-firmware 14.1 Installing to target /usr/bin/install -D -m 0644 /home/buildroot/autobuild/instance-3/output-1/build/wilc1000-firmware-14.1/wilc1003_firmware.bin /home/buildroot/autobuild/instance-3/output-1/target/lib/firmware/atmel/wilc1003_firmware.bin >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/buildroot/autobuild/instance-3/output-1/host/etc/meson sed -e 's%@TARGET_CROSS@%/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-%g' -e 's%@TARGET_ARCH@%arm%g' -e 's%@TARGET_CPU@%cortex-m4%g' -e 's%@TARGET_ENDIAN@%little%g' -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-Wl,-elf2flt', '-static'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%'-Wl,-elf2flt', '-static'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-Wl,-elf2flt', '-static', '-Wl,-elf2flt', '-static'@PKG_TARGET_CFLAGS@%g" -e 's%@HOST_DIR@%/home/buildroot/autobuild/instance-3/output-1/host%g' -e 's%@STAGING_DIR@%/home/buildroot/autobuild/instance-3/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot%g' -e 's%@STATIC@%true%g' package/meson//cross-compilation.conf.in > /home/buildroot/autobuild/instance-3/output-1/host/etc/meson/cross-compilation.conf.in sed -e 's%@PKG_TARGET_CFLAGS@%%g' -e 's%@PKG_TARGET_LDFLAGS@%%g' -e 's%@PKG_TARGET_CXXFLAGS@%%g' /home/buildroot/autobuild/instance-3/output-1/host/etc/meson/cross-compilation.conf.in > /home/buildroot/autobuild/instance-3/output-1/host/etc/meson/cross-compilation.conf /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/buildroot/autobuild/instance-3/output-1/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/autobuild/instance-3/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /home/buildroot/autobuild/instance-3/output-1/build/busybox-1.32.0/.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/instance-3/output-1/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/instance-3/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/buildroot/autobuild/instance-3/output-1/build/busybox-1.32.0/.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/instance-3/output-1/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/instance-3/output-1/target/etc/shells; fi mkdir -p /home/buildroot/autobuild/instance-3/output-1/target/etc echo "buildroot" > /home/buildroot/autobuild/instance-3/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/instance-3/output-1/target/etc/hosts mkdir -p /home/buildroot/autobuild/instance-3/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/instance-3/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/instance-3/output-1/target/etc/shadow rm -f /home/buildroot/autobuild/instance-3/output-1/target/bin/sh if [ -x /home/buildroot/autobuild/instance-3/output-1/target/sbin/swapon -a -x /home/buildroot/autobuild/instance-3/output-1/target/sbin/swapoff ]; then /bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/buildroot/autobuild/instance-3/output-1/target/etc/inittab; else /bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/buildroot/autobuild/instance-3/output-1/target/etc/inittab; fi printf '%s\n' C en_US locale-archive > /home/buildroot/autobuild/instance-3/output-1/build/locales.nopurge for dir in /home/buildroot/autobuild/instance-3/output-1/target/usr/share/locale /home/buildroot/autobuild/instance-3/output-1/target/usr/share/X11/locale /home/buildroot/autobuild/instance-3/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/instance-3/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/autobuild/instance-3/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/instance-3/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/instance-3/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/autobuild/instance-3/output-1/target/usr/include /home/buildroot/autobuild/instance-3/output-1/target/usr/share/aclocal \ /home/buildroot/autobuild/instance-3/output-1/target/usr/lib/pkgconfig /home/buildroot/autobuild/instance-3/output-1/target/usr/share/pkgconfig \ /home/buildroot/autobuild/instance-3/output-1/target/usr/lib/cmake /home/buildroot/autobuild/instance-3/output-1/target/usr/share/cmake \ /home/buildroot/autobuild/instance-3/output-1/target/usr/doc find /home/buildroot/autobuild/instance-3/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/instance-3/output-1/target/lib/ /home/buildroot/autobuild/instance-3/output-1/target/usr/lib/ /home/buildroot/autobuild/instance-3/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f find: '/home/buildroot/autobuild/instance-3/output-1/target/usr/libexec/': No such file or directory rm -rf /home/buildroot/autobuild/instance-3/output-1/target/usr/share/gdb rm -rf /home/buildroot/autobuild/instance-3/output-1/target/usr/share/bash-completion rm -rf /home/buildroot/autobuild/instance-3/output-1/target/etc/bash_completion.d rm -rf /home/buildroot/autobuild/instance-3/output-1/target/usr/share/zsh rm -rf /home/buildroot/autobuild/instance-3/output-1/target/usr/man /home/buildroot/autobuild/instance-3/output-1/target/usr/share/man rm -rf /home/buildroot/autobuild/instance-3/output-1/target/usr/info /home/buildroot/autobuild/instance-3/output-1/target/usr/share/info rm -rf /home/buildroot/autobuild/instance-3/output-1/target/usr/doc /home/buildroot/autobuild/instance-3/output-1/target/usr/share/doc rm -rf /home/buildroot/autobuild/instance-3/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/instance-3/output-1/target/usr/share 2>/dev/null || true rm -rf /home/buildroot/autobuild/instance-3/output-1/target/lib/debug /home/buildroot/autobuild/instance-3/output-1/target/usr/lib/debug find /home/buildroot/autobuild/instance-3/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/buildroot/autobuild/instance-3/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/buildroot/autobuild/instance-3/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/instance-3/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/instance-3/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2019.08-rc1-7696-g616e3a2cb14"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2020.11.1"; \ echo "PRETTY_NAME=\"Buildroot 2020.11.1\"" \ ) > /home/buildroot/autobuild/instance-3/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/instance-3/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/buildroot/autobuild/instance-3/output-1/per-package /home/buildroot/autobuild/instance-3/buildroot/support/scripts/fix-rpath target touch /home/buildroot/autobuild/instance-3/output-1/target/usr ln -snf /home/buildroot/autobuild/instance-3/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot /home/buildroot/autobuild/instance-3/output-1/staging make: Leaving directory '/home/buildroot/autobuild/instance-3/buildroot' make: Entering directory '/home/buildroot/autobuild/instance-3/buildroot' >>> Buildroot 2019.08-rc1-7696-g616e3a2cb14 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-custom Collecting legal info >>> toolchain Collecting legal info >>> bitstream-vera 1.10 Collecting legal info COPYRIGHT.TXT: OK (sha256: 3361d054759a2fc686a2c058be82deaf9c2e6fe549be9004d7935a6c1736315d) >>> bitstream 1.5 Collecting legal info COPYING: OK (sha256: 9644a812f9a8377a59acb7092a36ce8882a39743425d9171a8fb84637e2f6e04) >>> busybox 1.32.0 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f) >>> host-pkgconf 1.6.1 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> libtirpc 1.2.6 Collecting legal info COPYING: OK (sha256: 17cf6098f95bdbb269f0bbc68e76c88fe20487ca7ec53f454923ab4256ecd2e7) >>> host-autoconf 2.69 Collecting legal info COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-nfs-utils 2.5.2 Collecting legal info COPYING: OK (sha256: 576540abf5e95029ad4ad90e32071385a5e95b2c30708c706116f3eb87b9a3de) >>> host-libtirpc 1.2.6 Collecting legal info COPYING: OK (sha256: 17cf6098f95bdbb269f0bbc68e76c88fe20487ca7ec53f454923ab4256ecd2e7) >>> util-linux 2.36.1 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> ncurses 6.1 Collecting legal info COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87) >>> host-ncurses 6.1 Collecting legal info COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87) >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> cairo 1.16.0 Collecting legal info COPYING: OK (sha256: 67228a9f7c5f9b67c58f556f1be178f62da4d9e2e6285318d8c74d567255abdf) COPYING-LGPL-2.1: OK (sha256: 9e9e8608c4cdda51a78cc3a385f4ec9a2e4c96d5ecad74ac8bca5fca3e563b7d) COPYING-MPL-1.1: OK (sha256: 53692a2ed6c6a2c6ec9b32dd0b820dfae91e0a1fcdf625ca9ed0bdf8705fcc4f) >>> fontconfig 2.13.1 Collecting legal info COPYING: OK (sha256: fa4cd9ab005185e10cd8f7504518856c7dd36c01e766c2bac87f4fc638e9f886) >>> expat 2.2.10 Collecting legal info COPYING: OK (sha256: 8c6b5b6de8fae20b317f4992729abc0e520bfba4c7606cd1e9eeb87418eebdec) >>> freetype 2.10.4 Collecting legal info docs/LICENSE.TXT: OK (sha256: fd056de4196903a676208ef58cfddafc7d583d1f28fa2e44c309cf84a59e62fb) docs/FTL.TXT: OK (sha256: 08c135755dd589039470f1fdbb400daaabaaa50d0b366d19cebff4d22986baa1) docs/GPLv2.TXT: OK (sha256: c4120c6752c910c299e3bd9cb3a46ff262c268303ca2069b61f92f10a5656c18) >>> libpng 1.6.37 Collecting legal info LICENSE: OK (sha256: bf5e22b9dce8464064ae17a48ea1133c3369ac9e1d80ef9e320e5219aa14ea9b) >>> host-gperf 3.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> pixman 0.40.0 Collecting legal info COPYING: OK (sha256: fac9270f0987b96ff4533fca3548c633e02083cbba4a0172a3b149b2e4019793) >>> cracklib 2.9.7 Collecting legal info COPYING.LIB: OK (sha256: f18a0811fa0e220ccbc42f661545e77f0388631e209585ed582a1c693029c6aa) >>> host-cracklib 2.9.7 Collecting legal info COPYING.LIB: OK (sha256: f18a0811fa0e220ccbc42f661545e77f0388631e209585ed582a1c693029c6aa) >>> ethtool 5.8 Collecting legal info LICENSE: OK (sha256: 5d632934396f90c82dfebe3c9512648bbb6333b406113d0cd331b0e0aa2d34a1) COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> fmt 7.0.3 Collecting legal info LICENSE.rst: OK (sha256: 825c9324e70f8c839c8ba910543dd4a7daee243b86ef960594c11381a19980b8) >>> host-cmake 3.15.5 Collecting legal info Copyright.txt: OK (sha256: dc628fb936a5d229296d42083f9a8218aa32204c016919e784404c9ec58776e9) >>> initscripts Collecting legal info >>> kexec 2.0.20 Collecting legal info COPYING: OK (sha256: fa5fc1d1eec39532ea517518eeefd7b6e3c14341a55e5880a0e2a49eee47a5b7) >>> libebml 1.4.0 Collecting legal info LICENSE.LGPL: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libgpg-error 1.37 Collecting legal info COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c) COPYING.LIB: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) >>> libgsasl 1.8.1 Collecting legal info README: OK (sha256: 185b5b29a3febbfe1ab0b1ec6b1a26df630be97a17a99b5d305fdfff3344c117) COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> libksba 1.3.5 Collecting legal info AUTHORS: OK (sha256: 240908e1356ffeb5d0730227b6198dcc8e878375d28632fd813e0ed75b35ccc2) COPYING: OK (sha256: 6197b98c6bf69838c624809c509d84333de1bc847155168c0e84527446a27076) COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.GPLv3: OK (sha256: 0abbff814cd00e2b0b6d08395af2b419c1a92026c4b4adacbb65ccda45fa58cf) COPYING.LGPLv3: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) >>> libmatroska 1.6.2 Collecting legal info LICENSE.LGPL: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libnfs 4.0.0 Collecting legal info COPYING: OK (sha256: edd960c0142b8ada98b43b6396b78f4e557b0bc70ac601a51e397ad04070e2c5) LICENCE-BSD.txt: OK (sha256: d9406ced95457941032aa11d04623b8ab71f2827a3395ebef137aec475be35b1) LICENCE-LGPL-2.1.txt: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) LICENCE-GPL-3.txt: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> libnl 3.5.0 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-bison 3.7.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> host-gettext Collecting legal info >>> host-gettext-tiny 0.3.2 Collecting legal info LICENSE: OK (sha256: 4c938aa3d8fa3c184bba5e87a8a2febc89560627c9d0567536879e3eca1a7b4f) extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> libogg 1.3.4 Collecting legal info COPYING: OK (sha256: d2ab5758336489da61c12cc5bb757da5339c4ae9001f9bb0562b4370249af814) >>> libpciaccess 0.16 Collecting legal info COPYING: OK (sha256: 47012fd746980d1712ac4f3841ab6164bda1d2b84880760e45dbe1e1dc07f608) >>> libpjsip 2.10 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> libsrtp 2.2.0 Collecting legal info LICENSE: OK (sha256: 8e19d42a1eec9561f3f347253ddf2e385c55f392f025bb0fd41b88dbf38db5ae) >>> libpwquality 1.4.2 Collecting legal info COPYING: OK (sha256: aa44d09f651bf99b56253187c7778a240740c767d28453ab7fdc9804c842baee) >>> libsocketcan 0.0.11 Collecting legal info LICENSE: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libudfread 1.1.0 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libwebsockets 4.0.20 Collecting legal info LICENSE: OK (sha256: 5756db345eb9c21cb06dd7cb69c38ec234657a233f9a186b4f5fa453681bd394) >>> matio 1.5.18 Collecting legal info COPYING: OK (sha256: 19494e9c9154a5e3f834e99d65fab0653b84280df7c98d1886a98d2bd28369c1) >>> host-mfgtools 0.02 Collecting legal info LICENSE: OK (sha256: 2655559a6bb1179eae514f5c7166f4ede4f2453efa9cf4dc3c045cab5d57dede) README.txt: OK (sha256: 0963b6e5086bf454265b0f57821a02b681d1211e40ad74c310231cb4d94815c9) >>> host-libusb 1.0.23 Collecting legal info COPYING: OK (sha256: 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a) >>> mini-snmpd 1.6 Collecting legal info COPYING: OK (sha256: 8a43b895972a24567297f44f35dab0f5f9ed3b7db6dac0bf6094075b27ab9d56) >>> mpdecimal 2.5.0 Collecting legal info LICENSE.txt: OK (sha256: b07528d8b1dbf1e2d2741052996f0876e23342ce2d30d0effa39c5457716c25a) >>> multicat 2.3 Collecting legal info COPYING: OK (sha256: 94f68aec169fb6c9937eade757251714d38a56812be5dbfc3973914a71ad8d2d) >>> owfs 3.2p3 Collecting legal info COPYING: OK (sha256: 1f0527ab035eefb5197c68633d06f50f5077c719d82a99344702ceaca29150b9) COPYING.LIB: OK (sha256: 8a6601b893d5784d931b2ede64a406fac463acfbb7014914e27de4d6e68457c3) >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> scrub 2.6.1 Collecting legal info COPYING: OK (sha256: 204d8eff92f95aac4df6c8122bc1505f468f3a901e5a4cc08940e0ede1938994) DISCLAIMER: OK (sha256: f76abbfb80cde1036cb553cdecb08bb846a48e33c91ef56c0f494172fd407f33) >>> sdparm 1.10 Collecting legal info COPYING: OK (sha256: 4f98444e14adb18a94a65c3ded5f0dad42d382c6a2288b593a2d5bd5ecc4f46d) >>> speex 1.2.0 Collecting legal info COPYING: OK (sha256: 671bb5d8fd3c6b05a2e831d90f978ac27965c92bd8ea6d16b3df76e3440c0e9f) >>> host-squashfs 4.4 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-lz4 1.9.2 Collecting legal info lib/LICENSE: OK (sha256: d15d99c8dc6b0ec22174c0e563a95bc40f9363ca7f9d9d793bb5c5a8e8d0af71) programs/COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-lzo 2.10 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-xz 5.2.5 Collecting legal info COPYING: OK (sha256: bcb02973ef6e87ea73d331b3a80df7748407f17efdb784b61b47e0e610d3bb5c) COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.GPLv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-zlib Collecting legal info >>> host-libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> host-zstd 1.4.5 Collecting legal info LICENSE: OK (sha256: 2c1a7fa704df8f3a606f6fc010b8b5aaebf403f3aeec339a12048f1ba7331a0b) COPYING: OK (sha256: f9c375a1be4a41f7b70301dd83c91cb89e41567478859b77eef375a52d782505) >>> tinyxml 2.6.2_2 Collecting legal info README: OK (sha256: a65b8363834ccbe31ab7b49dcba723ed204622df30326793e0121435624c1a8d) >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Collecting legal info LICENSE: OK (sha256: a45d0bb572ed792ed34627a72621834b3ba92aab6e2cc4e04301dee7a728d753) >>> host-sg3_utils 1.45 Collecting legal info COPYING: OK (sha256: d516b8b337a77e3d4c65dffe708ca7fb25b1cb4ec77ec362cf11ed659b9250bc) BSD_LICENSE: OK (sha256: 8ddd1d82f2be2f5cbd5b5c3b5c2ee94a90d2ca7112958448da74dd78384fd96a) >>> wavemon 0.9.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> wilc1000-firmware 14.1 Collecting legal info WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined) WARNING: wilc1000-firmware-14.1: cannot save license (WILC1000_FIRMWARE_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/instance-3/output-1/legal-info make: Leaving directory '/home/buildroot/autobuild/instance-3/buildroot'