libtool: install: /usr/bin/install -c sg_dd /home/buildroot/autobuild/run/instance-3/output-1/host/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /home/buildroot/autobuild/run/instance-3/output-1/host/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /home/buildroot/autobuild/run/instance-3/output-1/host/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /home/buildroot/autobuild/run/instance-3/output-1/host/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /home/buildroot/autobuild/run/instance-3/output-1/host/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /home/buildroot/autobuild/run/instance-3/output-1/host/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/buildroot/autobuild/run/instance-3/output-1/host/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/buildroot/autobuild/run/instance-3/output-1/host/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/buildroot/autobuild/run/instance-3/output-1/host/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/buildroot/autobuild/run/instance-3/output-1/host/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/buildroot/autobuild/run/instance-3/output-1/host/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/buildroot/autobuild/run/instance-3/output-1/host/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/buildroot/autobuild/run/instance-3/output-1/host/bin/sgp_dd make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-sg3_utils-1.47/src' make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-sg3_utils-1.47/src' Making install in doc make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-sg3_utils-1.47/doc' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-sg3_utils-1.47/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/host/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_elem_status.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_pip.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 '/home/buildroot/autobuild/run/instance-3/output-1/host/share/man/man8' /usr/bin/install -c -m 644 sg_sat_identify.8 sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/buildroot/autobuild/run/instance-3/output-1/host/share/man/man8' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-sg3_utils-1.47/doc' make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-sg3_utils-1.47/doc' Making install in scripts make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-sg3_utils-1.47/scripts' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-sg3_utils-1.47/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/host/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/buildroot/autobuild/run/instance-3/output-1/host/bin' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-sg3_utils-1.47/scripts' make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-sg3_utils-1.47/scripts' make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-sg3_utils-1.47' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-sg3_utils-1.47' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-sg3_utils-1.47' make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-sg3_utils-1.47' make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-sg3_utils-1.47' utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6.tar.gz: OK (sha256: 8b5ba0058a78de69faf6822bb10b457fff2f9e55dc112ccb81c35214b061c6e6) >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Extracting gzip -d -c /home/buildroot/autobuild/run/instance-3/dl/utp_com/utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-3/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6 -xf - >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Patching >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Configuring >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Building PATH="/home/buildroot/autobuild/run/instance-3/output-1/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" PKG_CONFIG="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/autobuild/run/instance-3/output-1/host/lib/pkgconfig:/home/buildroot/autobuild/run/instance-3/output-1/host/share/pkgconfig" AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld" NM="/usr/bin/nm" CC="/usr/bin/gcc" GCC="/usr/bin/gcc" CXX="/usr/bin/g++" CPP="/usr/bin/cpp" OBJCOPY="/usr/bin/objcopy" RANLIB="/usr/bin/ranlib" CPPFLAGS="-I/home/buildroot/autobuild/run/instance-3/output-1/host/include" CFLAGS="-O2 -I/home/buildroot/autobuild/run/instance-3/output-1/host/include" CXXFLAGS="-O2 -I/home/buildroot/autobuild/run/instance-3/output-1/host/include" LDFLAGS="-L/home/buildroot/autobuild/run/instance-3/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-3/output-1/host/lib" INTLTOOL_PERL=/usr/bin/perl /usr/bin/make -j4 -C /home/buildroot/autobuild/run/instance-3/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6 make[1]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6' /usr/bin/gcc -c -o utp_com.o utp_com.c -O2 -I/home/buildroot/autobuild/run/instance-3/output-1/host/include /usr/bin/gcc -o utp_com utp_com.o -L/home/buildroot/autobuild/run/instance-3/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-3/output-1/host/lib make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6' >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Installing to host directory /usr/bin/install -D -m 755 /home/buildroot/autobuild/run/instance-3/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6/utp_com /home/buildroot/autobuild/run/instance-3/output-1/host/bin/utp_com vo-aacenc-0.1.3.tar.gz: OK (sha256: e51a7477a359f18df7c4f82d195dab4e14e7414cbd48cf79cc195fc446850f36) >>> vo-aacenc 0.1.3 Extracting gzip -d -c /home/buildroot/autobuild/run/instance-3/dl/vo-aacenc/vo-aacenc-0.1.3.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3 -xf - >>> vo-aacenc 0.1.3 Patching >>> vo-aacenc 0.1.3 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3 -name $file); do cp support/gnuconfig/$file $i; done; done >>> vo-aacenc 0.1.3 Patching libtool patching file /home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3/ltmain.sh Hunk #7 succeeded at 6699 (offset 3 lines). Hunk #8 succeeded at 9280 (offset 6 lines). >>> vo-aacenc 0.1.3 Configuring (cd /home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3/ && rm -rf config.cache && PATH="/home/buildroot/autobuild/run/instance-3/output-1/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" AR="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc-ar" AS="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-as" LD="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-ld" NM="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc-nm" CC="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc" GCC="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc" CPP="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-cpp" CXX="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-g++" FC="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gfortran" F77="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gfortran" RANLIB="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc-ranlib" READELF="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-readelf" STRIP="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-strip" OBJCOPY="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-objcopy" OBJDUMP="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/run/instance-3/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-3/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-3/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/run/instance-3/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-3/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-as" DEFAULT_LINKER="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mlongcalls -mauto-litpools -Os -g2 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mlongcalls -mauto-litpools -Os -g2 " LDFLAGS="" FCFLAGS="-mlongcalls -mauto-litpools -Os -g2" FFLAGS="-mlongcalls -mauto-litpools -Os -g2" PKG_CONFIG="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mlongcalls -mauto-litpools -Os -g2 " CONFIG_SITE=/dev/null ./configure --target=xtensa-buildroot-linux-uclibc --host=xtensa-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for xtensa-buildroot-linux-uclibc-strip... /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking how to create a ustar tar archive... gnutar checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for xtensa-buildroot-linux-uclibc-gcc... /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc accepts -g... yes checking for /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc option to accept ISO C89... none needed checking dependency style of /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc... none checking dependency style of /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc... none checking for /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc option to accept ISO C99... none needed checking build system type... x86_64-pc-linux-gnu checking host system type... xtensa-buildroot-linux-uclibc checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc... /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-ld checking if the linker (/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc-nm checking the name lister (/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert x86_64-pc-linux-gnu file names to xtensa-buildroot-linux-uclibc format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-ld option to reload object files... -r checking for xtensa-buildroot-linux-uclibc-objdump... /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-objdump checking how to recognize dependent libraries... pass_all checking for xtensa-buildroot-linux-uclibc-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for xtensa-buildroot-linux-uclibc-ar... /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc-ar checking for archiver @FILE support... @ checking for xtensa-buildroot-linux-uclibc-strip... (cached) /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-strip checking for xtensa-buildroot-linux-uclibc-ranlib... /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc-ranlib checking command to parse /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc-nm output from /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc object... ok checking for sysroot... no checking for xtensa-buildroot-linux-uclibc-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking how to run the C preprocessor... /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-cpp checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc supports -fno-rtti -fno-exceptions... no checking for /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc option to produce PIC... -fPIC -DPIC checking if /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc PIC flag -fPIC -DPIC works... yes checking if /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc static flag -static works... yes checking if /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc supports -c -o file.o... yes checking if /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc supports -c -o file.o... (cached) yes checking whether the /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc linker (/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating ./config.status config.status: creating Makefile config.status: creating vo-aacenc.pc config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls >>> vo-aacenc 0.1.3 Building PATH="/home/buildroot/autobuild/run/instance-3/output-1/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" /usr/bin/make -j4 -C /home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3/ make[1]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3' CC cmnMemory.lo CC oper_32b.lo CC basicop2.lo CC aac_rom.lo CC aacenc.lo CC aacenc_core.lo CC adj_thr.lo CC band_nrg.lo CC bit_cnt.lo CC bitbuffer.lo CC bitenc.lo CC block_switch.lo CC channel_map.lo CC dyn_bits.lo CC grp_data.lo CC interface.lo CC line_pe.lo CC memalign.lo CC ms_stereo.lo CC pre_echo_control.lo CC psy_configuration.lo CC psy_main.lo CC qc_main.lo CC quantize.lo CC sf_estim.lo CC spreading.lo CC stat_bits.lo CC tns.lo CC transform.lo CCLD libvo-aacenc.la make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3' >>> vo-aacenc 0.1.3 Installing to staging directory PATH="/home/buildroot/autobuild/run/instance-3/output-1/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot install -C /home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3/ make[1]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3' make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/include/vo-aacenc' /bin/sh ./libtool --mode=install /usr/bin/install -c libvo-aacenc.la '/home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' /usr/bin/install -c -m 644 ./common/include/cmnMemory.h ./common/include/voAAC.h ./common/include/voAMRWB.h ./common/include/voAudio.h ./common/include/voIndex.h ./common/include/voMem.h ./common/include/voType.h '/home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/include/vo-aacenc' /usr/bin/install -c -m 644 vo-aacenc.pc '/home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' libtool: install: /usr/bin/install -c .libs/libvo-aacenc.so.0.0.4 /home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/libvo-aacenc.so.0.0.4 libtool: install: (cd /home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libvo-aacenc.so.0.0.4 libvo-aacenc.so.0 || { rm -f libvo-aacenc.so.0 && ln -s libvo-aacenc.so.0.0.4 libvo-aacenc.so.0; }; }) libtool: install: (cd /home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libvo-aacenc.so.0.0.4 libvo-aacenc.so || { rm -f libvo-aacenc.so && ln -s libvo-aacenc.so.0.0.4 libvo-aacenc.so; }; }) libtool: install: /usr/bin/install -c .libs/libvo-aacenc.lai /home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/libvo-aacenc.la libtool: install: warning: remember to run `libtool --finish /usr/lib' make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3' make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3' >>> vo-aacenc 0.1.3 Fixing libtool files for la in $(find /home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/autobuild/run/instance-3/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot:@STAGING_DIR@:g" \ -e "s:/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/autobuild/run/instance-3/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> vo-aacenc 0.1.3 Installing to target PATH="/home/buildroot/autobuild/run/instance-3/output-1/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/run/instance-3/output-1/target install -C /home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3/ make[1]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3' make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/include/vo-aacenc' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/pkgconfig' /bin/sh ./libtool --mode=install /usr/bin/install -c libvo-aacenc.la '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib' /usr/bin/install -c -m 644 ./common/include/cmnMemory.h ./common/include/voAAC.h ./common/include/voAMRWB.h ./common/include/voAudio.h ./common/include/voIndex.h ./common/include/voMem.h ./common/include/voType.h '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/include/vo-aacenc' /usr/bin/install -c -m 644 vo-aacenc.pc '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/pkgconfig' libtool: install: /usr/bin/install -c .libs/libvo-aacenc.so.0.0.4 /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/libvo-aacenc.so.0.0.4 libtool: install: (cd /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib && { ln -s -f libvo-aacenc.so.0.0.4 libvo-aacenc.so.0 || { rm -f libvo-aacenc.so.0 && ln -s libvo-aacenc.so.0.0.4 libvo-aacenc.so.0; }; }) libtool: install: (cd /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib && { ln -s -f libvo-aacenc.so.0.0.4 libvo-aacenc.so || { rm -f libvo-aacenc.so && ln -s libvo-aacenc.so.0.0.4 libvo-aacenc.so; }; }) libtool: install: /usr/bin/install -c .libs/libvo-aacenc.lai /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/libvo-aacenc.la libtool: install: warning: remember to run `libtool --finish /usr/lib' make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3' make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output-1/build/vo-aacenc-0.1.3' yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70-br1.tar.gz: OK (sha256: 108a0ceec862b56a3fbcb3ad28a8744d9800555ccb3e11bdd94c8cd4614296d5) >>> yavta 583bedefc2a247d2cfd32d1b4a0abbe3e2015c70 Extracting gzip -d -c /home/buildroot/autobuild/run/instance-3/dl/yavta/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70-br1.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-3/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70 -xf - >>> yavta 583bedefc2a247d2cfd32d1b4a0abbe3e2015c70 Patching >>> yavta 583bedefc2a247d2cfd32d1b4a0abbe3e2015c70 Configuring rm -rf /home/buildroot/autobuild/run/instance-3/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build sed -e "/^\[binaries\]$/s:$::" -e "/^\[properties\]$/s:$::" -e "s%@TARGET_CC@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc%g" -e "s%@TARGET_CXX@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-g++%g" -e "s%@TARGET_AR@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc-ar%g" -e "s%@TARGET_STRIP@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-strip%g" -e "s%@TARGET_ARCH@%xtensa%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%little%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-mlongcalls', '-mauto-litpools', '-Os', '-g2'%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-mlongcalls', '-mauto-litpools', '-Os', '-g2'%g" -e "s%@BR2_CMAKE@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/run/instance-3/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot%g" -e "s%@STATIC@%false%g" /home/buildroot/autobuild/run/instance-3/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/autobuild/run/instance-3/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build/cross-compilation.conf PATH="/home/buildroot/autobuild/run/instance-3/output-1/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" CC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" PYTHONNOUSERSITE=y /home/buildroot/autobuild/run/instance-3/output-1/host/bin/meson --prefix=/usr --libdir=lib --default-library=shared --buildtype=release --cross-file=/home/buildroot/autobuild/run/instance-3/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build/cross-compilation.conf -Db_pie=false -Dstrip=false -Dbuild.pkg_config_path=/home/buildroot/autobuild/run/instance-3/output-1/host/lib/pkgconfig -Dbuild.cmake_prefix_path=/home/buildroot/autobuild/run/instance-3/output-1/host/lib/cmake -Dwerror=false /home/buildroot/autobuild/run/instance-3/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70/ /home/buildroot/autobuild/run/instance-3/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build WARNING: Unknown CPU family xtensa, please report this at https://github.com/mesonbuild/meson/issues/new The Meson build system Version: 0.61.4 Source dir: /home/buildroot/autobuild/run/instance-3/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70 Build dir: /home/buildroot/autobuild/run/instance-3/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70/build Build type: cross build Project name: yavta Project version: 0.0.0 C compiler for the host machine: /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc (gcc 10.3.0 "xtensa-linux-gcc.br_real (Buildroot toolchains.bootlin.com-2021.11-1) 10.3.0") C linker for the host machine: /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc ld.bfd 2.36.1 C compiler for the build machine: /usr/bin/gcc (gcc 7.5.0 "gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0") C linker for the build machine: /usr/bin/gcc ld.bfd 2.30 Build machine cpu family: x86_64 Build machine cpu: x86_64 Host machine cpu family: xtensa Host machine cpu: Target machine cpu family: xtensa Target machine cpu: Checking for function "clock_gettime" : YES Build targets in project: 1 yavta 0.0.0 User defined options Cross files : /home/buildroot/autobuild/run/instance-3/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build/cross-compilation.conf build.cmake_prefix_path: /home/buildroot/autobuild/run/instance-3/output-1/host/lib/cmake build.pkg_config_path : /home/buildroot/autobuild/run/instance-3/output-1/host/lib/pkgconfig buildtype : release default_library : shared libdir : lib prefix : /usr strip : false werror : false b_pie : false Found ninja-1.10.2 at /home/buildroot/autobuild/run/instance-3/output-1/host/bin/ninja >>> yavta 583bedefc2a247d2cfd32d1b4a0abbe3e2015c70 Building PATH="/home/buildroot/autobuild/run/instance-3/output-1/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" PYTHONNOUSERSITE=y /home/buildroot/autobuild/run/instance-3/output-1/host/bin/ninja -j4 -C /home/buildroot/autobuild/run/instance-3/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build ninja: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build' [1/2] Compiling C object yavta.p/yavta.c.o [2/2] Linking target yavta >>> yavta 583bedefc2a247d2cfd32d1b4a0abbe3e2015c70 Installing to target PATH="/home/buildroot/autobuild/run/instance-3/output-1/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" DESTDIR=/home/buildroot/autobuild/run/instance-3/output-1/target PYTHONNOUSERSITE=y /home/buildroot/autobuild/run/instance-3/output-1/host/bin/ninja -j4 -C /home/buildroot/autobuild/run/instance-3/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build install ninja: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/yavta-583bedefc2a247d2cfd32d1b4a0abbe3e2015c70//build' [0/1] Installing files. Installing yavta to /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/host/etc/meson sed -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-mlongcalls', '-mauto-litpools', '-Os', '-g2'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_LDFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-mlongcalls', '-mauto-litpools', '-Os', '-g2'@PKG_TARGET_CXXFLAGS@%g" -e "s%@TARGET_CC@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc%g" -e "s%@TARGET_CXX@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-g++%g" -e "s%@TARGET_AR@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc-ar%g" -e "s%@TARGET_STRIP@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-strip%g" -e "s%@TARGET_ARCH@%xtensa%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%little%g" -e "s%@TARGET_CFLAGS@%%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%%g" -e "s%@BR2_CMAKE@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/run/instance-3/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot%g" -e "s%@STATIC@%false%g" /home/buildroot/autobuild/run/instance-3/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/autobuild/run/instance-3/output-1/host/etc/meson/cross-compilation.conf.in sed -e "s%@TARGET_CC@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc%g" -e "s%@TARGET_CXX@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-g++%g" -e "s%@TARGET_AR@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-gcc-ar%g" -e "s%@TARGET_STRIP@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-strip%g" -e "s%@TARGET_ARCH@%xtensa%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%little%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-mlongcalls', '-mauto-litpools', '-Os', '-g2'%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-mlongcalls', '-mauto-litpools', '-Os', '-g2'%g" -e "s%@BR2_CMAKE@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/run/instance-3/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot%g" -e "s%@STATIC@%false%g" /home/buildroot/autobuild/run/instance-3/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/autobuild/run/instance-3/output-1/host/etc/meson/cross-compilation.conf /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /home/buildroot/autobuild/run/instance-3/output-1/build/busybox-1.35.0/.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/run/instance-3/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/buildroot/autobuild/run/instance-3/output-1/build/busybox-1.35.0/.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/run/instance-3/output-1/target/etc/shells; fi rm -f /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/glib-2.0/schemas/*.xml /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/glib-2.0/schemas/*.dtd /home/buildroot/autobuild/run/instance-3/output-1/host/bin/glib-compile-schemas /home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/share/glib-2.0/schemas --targetdir=/home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/glib-2.0/schemas No schema files found: doing nothing. mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/target/etc echo "buildroot" > /home/buildroot/autobuild/run/instance-3/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/hosts mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/run/instance-3/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/run/instance-3/output-1/target/etc/shadow rm -f /home/buildroot/autobuild/run/instance-3/output-1/target/bin/sh if [ -x /home/buildroot/autobuild/run/instance-3/output-1/target/sbin/swapon -a -x /home/buildroot/autobuild/run/instance-3/output-1/target/sbin/swapoff ]; then /bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/inittab; else /bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/inittab; fi printf '%s\n' C en_US locale-archive > /home/buildroot/autobuild/run/instance-3/output-1/build/locales.nopurge for dir in /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/locale /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/X11/locale /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/run/instance-3/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/include /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/aclocal \ /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/pkgconfig /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/pkgconfig \ /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/cmake /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/cmake \ /home/buildroot/autobuild/run/instance-3/output-1/target/usr/doc find /home/buildroot/autobuild/run/instance-3/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/run/instance-3/output-1/target/lib/ /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/ /home/buildroot/autobuild/run/instance-3/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f find: '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/libexec/': No such file or directory rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/gdb rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/bash-completion rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/etc/bash_completion.d rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/zsh rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/man /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/man rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/info /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/info rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/doc /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/doc rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share 2>/dev/null || true rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/lib/debug /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/debug find /home/buildroot/autobuild/run/instance-3/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/buildroot/autobuild/run/instance-3/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/run/instance-3/output-1/host/bin/xtensa-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/buildroot/autobuild/run/instance-3/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/run/instance-3/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2022.02.4-110-gc56da683c8"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2022.02.4"; \ echo "PRETTY_NAME=\"Buildroot 2022.02.4\"" \ ) > /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/run/instance-3/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/buildroot/autobuild/run/instance-3/output-1/per-package /home/buildroot/autobuild/run/instance-3/buildroot/support/scripts/fix-rpath target touch /home/buildroot/autobuild/run/instance-3/output-1/target/usr ln -snf /home/buildroot/autobuild/run/instance-3/output-1/host/xtensa-buildroot-linux-uclibc/sysroot /home/buildroot/autobuild/run/instance-3/output-1/staging make: Leaving directory '/home/buildroot/autobuild/run/instance-3/buildroot' make: Entering directory '/home/buildroot/autobuild/run/instance-3/buildroot' >>> Buildroot 2022.02.4-110-gc56da683c8 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-bootlin 2021.11-1 Collecting legal info >>> toolchain Collecting legal info >>> busybox 1.35.0 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f) >>> util-linux 2.37.4 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> zlib Collecting legal info >>> libzlib 1.2.12 Collecting legal info README: OK (sha256: fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd) >>> bzip2 1.0.8 Collecting legal info LICENSE: OK (sha256: c6dbbf828498be844a89eaa3b84adbab3199e342eb5cb2ed2f0d4ba7ec0f38a3) >>> cups 2.4.2 Collecting legal info LICENSE: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) NOTICE: OK (sha256: 7a7bd639e3a8457ae40b0dcfb74ea3cc6a8132b06c726142e993625d33eb6de5) >>> host-autoconf 2.71 Collecting legal info COPYINGv3: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) COPYING.EXCEPTION: OK (sha256: 1f1cde9fb68b9b3cff18c420894bec5bd4defacd700b7d13df54a887301e5350) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-m4 1.4.19 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> fftw-single 3.3.8 Collecting legal info COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c) >>> initscripts Collecting legal info >>> iw 5.16 Collecting legal info COPYING: OK (sha256: 5932fb70481e128940168a5fdf133e6454293c0865c7e757874b235cb6daa2af) >>> libnl 3.5.0 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-bison 3.8.2 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> host-automake 1.16.5 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-gettext Collecting legal info >>> host-gettext-tiny 0.3.2 Collecting legal info LICENSE: OK (sha256: 4c938aa3d8fa3c184bba5e87a8a2febc89560627c9d0567536879e3eca1a7b4f) extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> leafnode2 2.0.0.alpha20140727b Collecting legal info COPYING: OK (sha256: 59d37f745dc5a2d63a51dff344f4ad89f72e76f8c7b7d877f20880d838b1bec9) COPYING.LGPL: OK (sha256: 0c92246a9d3636e0aa6a244f6c481639b2e530fbbb25bc048ce7acd83e1fc5f6) >>> host-pcre 8.45 Collecting legal info LICENCE: OK (sha256: 51b3dea44f63338b84b9c97b3d793826a8397309068cf9379a423216ab8ea5b2) >>> pcre 8.45 Collecting legal info LICENCE: OK (sha256: 51b3dea44f63338b84b9c97b3d793826a8397309068cf9379a423216ab8ea5b2) >>> libdbi 88b8477d57153b9f736dd19d432d3b7ab1c49073 Collecting legal info COPYING: OK (sha256: 5bbcbb737e60fe9deba08ecbd00920cfcc3403ba2e534c64fdeea49d6bb87509) >>> libffi 3.4.2 Collecting legal info LICENSE: OK (sha256: a61d06e8f7be57928e71e800eb9273b05cb8868c484108afe41e4305bb320dde) >>> libglib2 2.70.4 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-libglib2 2.70.4 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-libffi 3.4.2 Collecting legal info LICENSE: OK (sha256: a61d06e8f7be57928e71e800eb9273b05cb8868c484108afe41e4305bb320dde) >>> host-meson 0.61.4 Collecting legal info COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) >>> host-ninja 1.10.2 Collecting legal info COPYING: OK (sha256: eb7e9ab9690124c5c9f42bdc81383d886a3dede26345b6ed15bbad7caf81f7ea) >>> host-cmake 3.16.9 Collecting legal info Copyright.txt: OK (sha256: dc628fb936a5d229296d42083f9a8218aa32204c016919e784404c9ec58776e9) >>> host-python-setuptools 60.7.0 Collecting legal info LICENSE: OK (sha256: db3f0246b1f9278f15845b99fec478b8b506eb76487993722f8c6e254285faf8) >>> host-python3 3.10.5 Collecting legal info LICENSE: OK (sha256: f03e17cd594c2085f66a454e695c7ebe5b4d3c0eff534f4f194abc2fd164621b) >>> host-autoconf-archive 2021.02.19 Collecting legal info COPYING: OK (sha256: e6037104443f9a7829b2aa7c5370d0789a7bda3ca65a0b904cdc0c2e285d9195) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-expat 2.4.7 Collecting legal info COPYING: OK (sha256: 8c6b5b6de8fae20b317f4992729abc0e520bfba4c7606cd1e9eeb87418eebdec) >>> host-zlib Collecting legal info >>> host-libzlib 1.2.12 Collecting legal info README: OK (sha256: fc2c3368901700f0acdeb1d8afeaca5923296768ec6824ecdf627aac396001fd) >>> host-util-linux 2.37.4 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> librsync 2.3.2 Collecting legal info COPYING: OK (sha256: 5bbcbb737e60fe9deba08ecbd00920cfcc3403ba2e534c64fdeea49d6bb87509) >>> popt 1.18 Collecting legal info COPYING: OK (sha256: 518d4f2a05064cb9a8ec0ea02e86408af4feed6916f78ef42171465db8b383c5) >>> libsndfile 1.1.0 Collecting legal info COPYING: OK (sha256: ad01ea5cd2755f6048383c8d54c88459cd6fcb17757c5c8892f8c5ea060f6140) >>> logsurfer 1.8 Collecting legal info >>> lttng-babeltrace 1.5.7 Collecting legal info mit-license.txt: OK (sha256: 2f801b7c2494850c3d91da820eb230502dc0192c9d0db024db37ec08d0be1434) gpl-2.0.txt: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) LICENSE: OK (sha256: 12d4222ac628fe4092cba8ed90bc5227a4dedd0b94973273cecbc393325bf1c2) >>> mawk 1.3.4-20200120 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> minimodem 0.24 Collecting legal info COPYING: OK (sha256: c298178753129680ef6d3112f0f8b61acc405c86c1997dfe59735257988f8b33) >>> host-opkg-utils 0.4.5 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> host-diffutils 3.8 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-lz4 1.9.3 Collecting legal info lib/LICENSE: OK (sha256: d15d99c8dc6b0ec22174c0e563a95bc40f9363ca7f9d9d793bb5c5a8e8d0af71) programs/COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-xz 5.2.5 Collecting legal info COPYING: OK (sha256: bcb02973ef6e87ea73d331b3a80df7748407f17efdb784b61b47e0e610d3bb5c) COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.GPLv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> rsh-redone 85 Collecting legal info rsh.c: OK (sha256: 92c3a6a0efe5347c282081c6f67aebfec0f33b880c9efb87eb5232dcdd748369) >>> spice-protocol 0.14.3 Collecting legal info COPYING: OK (sha256: eb55ea746be694c449224c7ddce6340648b075fd377281712a19094e7fb7ef92) >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Collecting legal info LICENSE: OK (sha256: a45d0bb572ed792ed34627a72621834b3ba92aab6e2cc4e04301dee7a728d753) >>> host-sg3_utils 1.47 Collecting legal info COPYING: OK (sha256: d212debdb0a5d7754c977f6dc53bb6c88b4ace7ab784ddbccd06bb970adb1a37) BSD_LICENSE: OK (sha256: 8ddd1d82f2be2f5cbd5b5c3b5c2ee94a90d2ca7112958448da74dd78384fd96a) >>> vo-aacenc 0.1.3 Collecting legal info COPYING: OK (sha256: 8b3f1762349248d444ab9acbafe73941254e36e1064954da56bb9ddbd5873ddb) >>> yavta 583bedefc2a247d2cfd32d1b4a0abbe3e2015c70 Collecting legal info COPYING.GPL: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-bootlin-2021.11-1: cannot save license (TOOLCHAIN_EXTERNAL_BOOTLIN_LICENSE_FILES not defined) WARNING: logsurfer-1.8: cannot save license (LOGSURFER_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/run/instance-3/output-1/legal-info make: Leaving directory '/home/buildroot/autobuild/run/instance-3/buildroot'