libtool: install: /usr/bin/install -c .libs/libsgutils2.lai /home/buildroot/instance-0/output-1/host/lib/libsgutils2.la libtool: finish: PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /home/buildroot/instance-0/output-1/host/lib ---------------------------------------------------------------------- Libraries have been installed in: /home/buildroot/instance-0/output-1/host/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48/lib' make[2]: Leaving directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48/lib' Making install in src make[2]: Entering directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48/src' make[3]: Entering directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48/src' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/instance-0/output-1/host/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c sg_bg_ctl sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_elem_status sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rem_rest_elem sg_rep_density sg_rep_pip sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_datetime sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_seek sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_stream_ctl sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_attr sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_write_x sg_zone sg_z_act_query sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/home/buildroot/instance-0/output-1/host/bin' libtool: install: /usr/bin/install -c sg_bg_ctl /home/buildroot/instance-0/output-1/host/bin/sg_bg_ctl libtool: install: /usr/bin/install -c sg_compare_and_write /home/buildroot/instance-0/output-1/host/bin/sg_compare_and_write libtool: install: /usr/bin/install -c sg_decode_sense /home/buildroot/instance-0/output-1/host/bin/sg_decode_sense libtool: install: /usr/bin/install -c sg_format /home/buildroot/instance-0/output-1/host/bin/sg_format libtool: install: /usr/bin/install -c sg_get_config /home/buildroot/instance-0/output-1/host/bin/sg_get_config libtool: install: /usr/bin/install -c sg_get_elem_status /home/buildroot/instance-0/output-1/host/bin/sg_get_elem_status libtool: install: /usr/bin/install -c sg_get_lba_status /home/buildroot/instance-0/output-1/host/bin/sg_get_lba_status libtool: install: /usr/bin/install -c sg_ident /home/buildroot/instance-0/output-1/host/bin/sg_ident libtool: install: /usr/bin/install -c sg_inq /home/buildroot/instance-0/output-1/host/bin/sg_inq libtool: install: /usr/bin/install -c sg_logs /home/buildroot/instance-0/output-1/host/bin/sg_logs libtool: install: /usr/bin/install -c sg_luns /home/buildroot/instance-0/output-1/host/bin/sg_luns libtool: install: /usr/bin/install -c sg_modes /home/buildroot/instance-0/output-1/host/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /home/buildroot/instance-0/output-1/host/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /home/buildroot/instance-0/output-1/host/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /home/buildroot/instance-0/output-1/host/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /home/buildroot/instance-0/output-1/host/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /home/buildroot/instance-0/output-1/host/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /home/buildroot/instance-0/output-1/host/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /home/buildroot/instance-0/output-1/host/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /home/buildroot/instance-0/output-1/host/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /home/buildroot/instance-0/output-1/host/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /home/buildroot/instance-0/output-1/host/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /home/buildroot/instance-0/output-1/host/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /home/buildroot/instance-0/output-1/host/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rem_rest_elem /home/buildroot/instance-0/output-1/host/bin/sg_rem_rest_elem libtool: install: /usr/bin/install -c sg_rep_density /home/buildroot/instance-0/output-1/host/bin/sg_rep_density libtool: install: /usr/bin/install -c sg_rep_pip /home/buildroot/instance-0/output-1/host/bin/sg_rep_pip libtool: install: /usr/bin/install -c sg_rep_zones /home/buildroot/instance-0/output-1/host/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /home/buildroot/instance-0/output-1/host/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /home/buildroot/instance-0/output-1/host/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /home/buildroot/instance-0/output-1/host/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /home/buildroot/instance-0/output-1/host/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /home/buildroot/instance-0/output-1/host/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /home/buildroot/instance-0/output-1/host/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_datetime /home/buildroot/instance-0/output-1/host/bin/sg_sat_datetime libtool: install: /usr/bin/install -c sg_sat_identify /home/buildroot/instance-0/output-1/host/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /home/buildroot/instance-0/output-1/host/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/buildroot/instance-0/output-1/host/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /home/buildroot/instance-0/output-1/host/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_seek /home/buildroot/instance-0/output-1/host/bin/sg_seek libtool: install: /usr/bin/install -c sg_senddiag /home/buildroot/instance-0/output-1/host/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /home/buildroot/instance-0/output-1/host/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /home/buildroot/instance-0/output-1/host/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /home/buildroot/instance-0/output-1/host/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /home/buildroot/instance-0/output-1/host/bin/sg_stpg libtool: install: /usr/bin/install -c sg_stream_ctl /home/buildroot/instance-0/output-1/host/bin/sg_stream_ctl libtool: install: /usr/bin/install -c sg_sync /home/buildroot/instance-0/output-1/host/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /home/buildroot/instance-0/output-1/host/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /home/buildroot/instance-0/output-1/host/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /home/buildroot/instance-0/output-1/host/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /home/buildroot/instance-0/output-1/host/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /home/buildroot/instance-0/output-1/host/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /home/buildroot/instance-0/output-1/host/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_attr /home/buildroot/instance-0/output-1/host/bin/sg_write_attr libtool: install: /usr/bin/install -c sg_write_buffer /home/buildroot/instance-0/output-1/host/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /home/buildroot/instance-0/output-1/host/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /home/buildroot/instance-0/output-1/host/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /home/buildroot/instance-0/output-1/host/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_write_x /home/buildroot/instance-0/output-1/host/bin/sg_write_x libtool: install: /usr/bin/install -c sg_zone /home/buildroot/instance-0/output-1/host/bin/sg_zone libtool: install: /usr/bin/install -c sg_z_act_query /home/buildroot/instance-0/output-1/host/bin/sg_z_act_query libtool: install: /usr/bin/install -c sg_copy_results /home/buildroot/instance-0/output-1/host/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /home/buildroot/instance-0/output-1/host/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /home/buildroot/instance-0/output-1/host/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /home/buildroot/instance-0/output-1/host/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /home/buildroot/instance-0/output-1/host/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /home/buildroot/instance-0/output-1/host/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /home/buildroot/instance-0/output-1/host/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/buildroot/instance-0/output-1/host/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/buildroot/instance-0/output-1/host/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/buildroot/instance-0/output-1/host/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/buildroot/instance-0/output-1/host/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/buildroot/instance-0/output-1/host/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/buildroot/instance-0/output-1/host/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/buildroot/instance-0/output-1/host/bin/sgp_dd make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48/src' make[2]: Leaving directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48/src' Making install in doc make[2]: Entering directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48/doc' make[3]: Entering directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/instance-0/output-1/host/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg3_utils_json.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_elem_status.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rem_rest_elem.8 sg_rep_density.8 sg_rep_pip.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 '/home/buildroot/instance-0/output-1/host/share/man/man8' /usr/bin/install -c -m 644 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_datetime.8 sg_sat_identify.8 sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_attr.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 sg_z_act_query.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 '/home/buildroot/instance-0/output-1/host/share/man/man8' /usr/bin/install -c -m 644 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/buildroot/instance-0/output-1/host/share/man/man8' make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48/doc' make[2]: Leaving directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48/doc' Making install in scripts make[2]: Entering directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48/scripts' make[3]: Entering directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/instance-0/output-1/host/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/buildroot/instance-0/output-1/host/bin' make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48/scripts' make[2]: Leaving directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48/scripts' make[2]: Entering directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48' make[3]: Entering directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48' make[2]: Leaving directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48' make[1]: Leaving directory '/home/buildroot/instance-0/output-1/build/host-sg3_utils-1.48' utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6.tar.gz: OK (sha256: 8b5ba0058a78de69faf6822bb10b457fff2f9e55dc112ccb81c35214b061c6e6) >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Extracting gzip -d -c /home/buildroot/instance-0/dl/utp_com/utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6.tar.gz | tar --strip-components=1 -C /home/buildroot/instance-0/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6 -xf - >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Patching >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Configuring >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Building GIT_DIR=. PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PKG_CONFIG="/home/buildroot/instance-0/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/instance-0/output-1/host/lib/pkgconfig:/home/buildroot/instance-0/output-1/host/share/pkgconfig" AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld" NM="/usr/bin/nm" CC="/usr/bin/gcc" GCC="/usr/bin/gcc" CXX="/usr/bin/g++" CPP="/usr/bin/cpp" OBJCOPY="/usr/bin/objcopy" RANLIB="/usr/bin/ranlib" CPPFLAGS="-I/home/buildroot/instance-0/output-1/host/include" CFLAGS="-O2 -I/home/buildroot/instance-0/output-1/host/include" CXXFLAGS="-O2 -I/home/buildroot/instance-0/output-1/host/include" LDFLAGS="-L/home/buildroot/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/instance-0/output-1/host/lib" INTLTOOL_PERL=/usr/bin/perl /usr/bin/make -j17 -C /home/buildroot/instance-0/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6 make[1]: Entering directory '/home/buildroot/instance-0/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6' /usr/bin/gcc -c -o utp_com.o utp_com.c -O2 -I/home/buildroot/instance-0/output-1/host/include /usr/bin/gcc -o utp_com utp_com.o -L/home/buildroot/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/instance-0/output-1/host/lib make[1]: Leaving directory '/home/buildroot/instance-0/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6' >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Installing to host directory /usr/bin/install -D -m 755 /home/buildroot/instance-0/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6/utp_com /home/buildroot/instance-0/output-1/host/bin/utp_com wipe-2.3.1.tar.bz2: OK (sha256: 463916370f9b35bb34419c2c0ae3dc4c0a471db32e8595afa1d14c0337b61aa0) >>> wipe 2.3.1 Extracting bzcat /home/buildroot/instance-0/dl/wipe/wipe-2.3.1.tar.bz2 | tar --strip-components=1 -C /home/buildroot/instance-0/output-1/build/wipe-2.3.1 -xf - >>> wipe 2.3.1 Patching Applying 0001-musl.patch using patch: patching file rand.h >>> wipe 2.3.1 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/buildroot/instance-0/output-1/build/wipe-2.3.1 -name $file); do cp support/gnuconfig/$file $i; done; done >>> wipe 2.3.1 Patching libtool >>> wipe 2.3.1 Configuring (cd /home/buildroot/instance-0/output-1/build/wipe-2.3.1/ && rm -rf config.cache && GIT_DIR=. PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" AR="/home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc-ar" AS="/home/buildroot/instance-0/output-1/host/bin/arm-linux-as" LD="/home/buildroot/instance-0/output-1/host/bin/arm-linux-ld" NM="/home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc-nm" CC="/home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc" GCC="/home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc" CPP="/home/buildroot/instance-0/output-1/host/bin/arm-linux-cpp" CXX="/home/buildroot/instance-0/output-1/host/bin/arm-linux-g++" FC="/home/buildroot/instance-0/output-1/host/bin/arm-linux-gfortran" F77="/home/buildroot/instance-0/output-1/host/bin/arm-linux-gfortran" RANLIB="/home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc-ranlib" READELF="/home/buildroot/instance-0/output-1/host/bin/arm-linux-readelf" STRIP="/home/buildroot/instance-0/output-1/host/bin/arm-linux-strip" OBJCOPY="/home/buildroot/instance-0/output-1/host/bin/arm-linux-objcopy" OBJDUMP="/home/buildroot/instance-0/output-1/host/bin/arm-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/instance-0/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/instance-0/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/instance-0/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/instance-0/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/instance-0/output-1/host/bin/arm-linux-as" DEFAULT_LINKER="/home/buildroot/instance-0/output-1/host/bin/arm-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -static" CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -static -static" LDFLAGS=" -static" FCFLAGS=" -O2 -g0 -static" FFLAGS=" -O2 -g0 -static" PKG_CONFIG="/home/buildroot/instance-0/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CONFIG_SITE=/dev/null ./configure --target=arm-buildroot-linux-uclibcgnueabihf --host=arm-buildroot-linux-uclibcgnueabihf --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --enable-static --disable-shared ) loading site script /dev/null creating cache ./config.cache checking host system type... arm-buildroot-linux-uclibcgnueabihf checking target system type... arm-buildroot-linux-uclibcgnueabihf checking build system type... x86_64-pc-linux-gnu checking for gcc... /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc checking whether the C compiler (/home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -static -static) works... yes checking whether the C compiler (/home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -static -static) is a cross-compiler... yes checking whether we are using GNU C... yes checking whether /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc accepts -g... yes checking for POSIXized ISC... no checking how to run the C preprocessor... /home/buildroot/instance-0/output-1/host/bin/arm-linux-cpp checking whether /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc needs -traditional... no checking for a BSD compatible install... /usr/bin/install -c checking whether the C compiler accepts -pipe... yes checking whether the C compiler accepts -g... yes checking whether the C compiler accepts -O0... yes checking whether the C compiler accepts -O2... yes checking whether the C compiler accepts -ansi... yes checking whether the C compiler accepts -pedantic... yes checking whether the C compiler accepts -Wall... yes checking whether the C compiler accepts -Werror... yes checking for dirent.h that defines DIR... yes checking for opendir in -ldir... no checking for ANSI C header files... yes checking for unistd.h... yes checking for stdint.h... yes checking for fcntl.h... yes checking for memory.h... yes checking for linux/fs.h... yes checking for sys/mount.h... yes checking for sys/disklabel.h... no checking for sys/ioctl.h... yes checking for sys/file.h... yes checking for sys/stat.h... yes checking for sys/time.h... yes checking for sys/types.h... yes checking for getopt.h... yes checking for errno.h... yes checking for termio.h... yes checking for termios.h... yes checking for linux/mtio.h... yes checking for working const... yes checking for inline... __inline__ checking for off_t... yes checking for size_t... yes checking whether stat file-mode macros are broken... no checking for unistd.h... (cached) yes checking for getpagesize... yes checking for working mmap... (cached) yes checking for getopt... yes checking for strnlen... yes checking for bzero... yes checking for memset... yes checking for memcpy... yes checking for realloc... yes checking for fchmod... yes checking for ioctl... yes checking for fcntl... yes checking for lockf... yes checking for flock... yes checking for fsync... yes checking for fdatasync... yes checking for unlink... yes checking for rmdir... yes checking for remove... yes checking for rename... yes checking for dirfd... yes updating cache ./config.cache creating ./config.status creating Makefile creating config.h >>> wipe 2.3.1 Building GIT_DIR=. PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j17 -C /home/buildroot/instance-0/output-1/build/wipe-2.3.1/ make[1]: Entering directory '/home/buildroot/instance-0/output-1/build/wipe-2.3.1' /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o main.o main.c /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o wipe.o wipe.c /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o rand.o rand.c /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o dir.o dir.c /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o file.o file.c /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o blkdev.o blkdev.c /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o lock.o lock.c /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o text.o text.c /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o str.o str.c /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o percent.o percent.c /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o prompt.o prompt.c /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o io.o io.c /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o mt.o mt.c /home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc *.o -o wipe make[1]: Leaving directory '/home/buildroot/instance-0/output-1/build/wipe-2.3.1' >>> wipe 2.3.1 Installing to target /usr/bin/install -D -m 0755 /home/buildroot/instance-0/output-1/build/wipe-2.3.1/wipe /home/buildroot/instance-0/output-1/target/usr/bin/wipe >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/buildroot/instance-0/output-1/host/etc/meson sed -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-static'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%'-static'@PKG_TARGET_LDFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-static', '-static'@PKG_TARGET_CXXFLAGS@%g" -e "s%@TARGET_FCFLAGS@%'-O2', '-g0', '-static'@PKG_TARGET_FCFLAGS@%g" -e "s%@TARGET_CC@%/home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc%g" -e "s%@TARGET_CXX@%/home/buildroot/instance-0/output-1/host/bin/arm-linux-g++%g" -e "s%@TARGET_AR@%/home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc-ar%g" -e "s%@TARGET_FC@%/bin/false%g" -e "s%@TARGET_STRIP@%/home/buildroot/instance-0/output-1/host/bin/arm-linux-strip%g" -e "s%@TARGET_ARCH@%arm%g" -e "s%@TARGET_CPU@%arm1176jzf-s%g" -e "s%@TARGET_ENDIAN@%little%g" -e "s%@TARGET_FCFLAGS@%%g" -e "s%@TARGET_CFLAGS@%%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%%g" -e "s%@BR2_CMAKE@%/home/buildroot/instance-0/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/instance-0/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/instance-0/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot%g" -e "s%@STATIC@%true%g" /home/buildroot/instance-0/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/instance-0/output-1/host/etc/meson/cross-compilation.conf.in sed -e "s%@TARGET_CC@%/home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc%g" -e "s%@TARGET_CXX@%/home/buildroot/instance-0/output-1/host/bin/arm-linux-g++%g" -e "s%@TARGET_AR@%/home/buildroot/instance-0/output-1/host/bin/arm-linux-gcc-ar%g" -e "s%@TARGET_FC@%/bin/false%g" -e "s%@TARGET_STRIP@%/home/buildroot/instance-0/output-1/host/bin/arm-linux-strip%g" -e "s%@TARGET_ARCH@%arm%g" -e "s%@TARGET_CPU@%arm1176jzf-s%g" -e "s%@TARGET_ENDIAN@%little%g" -e "s%@TARGET_FCFLAGS@%'-O2', '-g0', '-static'%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-static'%g" -e "s%@TARGET_LDFLAGS@%'-static'%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-static', '-static'%g" -e "s%@BR2_CMAKE@%/home/buildroot/instance-0/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/instance-0/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/instance-0/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot%g" -e "s%@STATIC@%true%g" /home/buildroot/instance-0/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/instance-0/output-1/host/etc/meson/cross-compilation.conf mkdir -p /home/buildroot/instance-0/output-1/target/etc echo "buildroot" > /home/buildroot/instance-0/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/instance-0/output-1/target/etc/hosts mkdir -p /home/buildroot/instance-0/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/instance-0/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/instance-0/output-1/target/etc/shadow rm -f /home/buildroot/instance-0/output-1/target/bin/sh printf '%s\n' C en_US locale-archive > /home/buildroot/instance-0/output-1/build/locales.nopurge for dir in /home/buildroot/instance-0/output-1/target/usr/share/locale /home/buildroot/instance-0/output-1/target/usr/share/X11/locale /home/buildroot/instance-0/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/instance-0/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/instance-0/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/instance-0/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/instance-0/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/instance-0/output-1/target/usr/include /home/buildroot/instance-0/output-1/target/usr/share/aclocal \ /home/buildroot/instance-0/output-1/target/usr/lib/pkgconfig /home/buildroot/instance-0/output-1/target/usr/share/pkgconfig \ /home/buildroot/instance-0/output-1/target/usr/lib/cmake /home/buildroot/instance-0/output-1/target/usr/share/cmake \ /home/buildroot/instance-0/output-1/target/usr/lib/rpm /home/buildroot/instance-0/output-1/target/usr/doc find /home/buildroot/instance-0/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/instance-0/output-1/target/lib/ /home/buildroot/instance-0/output-1/target/usr/lib/ /home/buildroot/instance-0/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f rm -rf /home/buildroot/instance-0/output-1/target/usr/share/gdb rm -rf /home/buildroot/instance-0/output-1/target/usr/share/bash-completion rm -rf /home/buildroot/instance-0/output-1/target/etc/bash_completion.d rm -rf /home/buildroot/instance-0/output-1/target/usr/share/zsh rm -rf /home/buildroot/instance-0/output-1/target/usr/man /home/buildroot/instance-0/output-1/target/usr/share/man rm -rf /home/buildroot/instance-0/output-1/target/usr/info /home/buildroot/instance-0/output-1/target/usr/share/info rm -rf /home/buildroot/instance-0/output-1/target/usr/doc /home/buildroot/instance-0/output-1/target/usr/share/doc rm -rf /home/buildroot/instance-0/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/instance-0/output-1/target/usr/share 2>/dev/null || true rm -rf /home/buildroot/instance-0/output-1/target/lib/debug /home/buildroot/instance-0/output-1/target/usr/lib/debug find /home/buildroot/instance-0/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/instance-0/output-1/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/buildroot/instance-0/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/instance-0/output-1/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/buildroot/instance-0/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/instance-0/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/instance-0/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2024.02-371-g2656ca8912"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2024.05-git"; \ echo "PRETTY_NAME=\"Buildroot 2024.05-git\"" \ ) > /home/buildroot/instance-0/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/instance-0/output-1/target/etc >>> Sanitizing RPATH in target tree PARALLEL_JOBS=17 \ PER_PACKAGE_DIR=/home/buildroot/instance-0/output-1/per-package \ /home/buildroot/instance-0/buildroot/support/scripts/fix-rpath target touch /home/buildroot/instance-0/output-1/target/usr ln -snf /home/buildroot/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot /home/buildroot/instance-0/output-1/staging make: Leaving directory '/home/buildroot/instance-0/buildroot' make: Entering directory '/home/buildroot/instance-0/buildroot' >>> Buildroot 2024.02-371-g2656ca8912 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-none Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-custom Collecting legal info >>> toolchain Collecting legal info >>> atop 2.9.0 Collecting legal info COPYING: OK (sha256: 204d8eff92f95aac4df6c8122bc1505f468f3a901e5a4cc08940e0ede1938994) >>> ncurses 6.4-20230603 Collecting legal info COPYING: OK (sha256: 0413b2f4ea863194c174673032f0fca84f1ea1ed4eed6476baea68c075a631ce) >>> host-ncurses 6.4-20230603 Collecting legal info COPYING: OK (sha256: 0413b2f4ea863194c174673032f0fca84f1ea1ed4eed6476baea68c075a631ce) >>> zlib Collecting legal info >>> libzlib 1.3.1 Collecting legal info LICENSE: OK (sha256: 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243) >>> bitwise 0.50 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> readline 8.2 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-autoconf 2.72 Collecting legal info COPYINGv3: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) COPYING.EXCEPTION: OK (sha256: 1f1cde9fb68b9b3cff18c420894bec5bd4defacd700b7d13df54a887301e5350) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-m4 1.4.19 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-checksec 2.6.0 Collecting legal info LICENSE.txt: OK (sha256: 55154b4be6dfcb3ff29d1e3648d0d07b3943a5fcc3af7c2e0e799b074734f722) >>> empty 0.6.23c Collecting legal info COPYRIGHT: OK (sha256: 6433f4490a82b80ddac37f24cebfe8f3cd7de5686ebb9737281d47997a9941d6) >>> fconfig 20080329 Collecting legal info fconfig.c: OK (sha256: e698a9ea4d6dab0a15d3d6fd354b97b820629244f946529cc7f42b2b8e8f16d0) >>> frotz 2.54 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> host-gdb 13.2 Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for COPYING.LIB ERROR: No hash found for COPYING3 ERROR: No hash found for COPYING3.LIB >>> host-expat 2.6.2 Collecting legal info COPYING: OK (sha256: 122f2c27000472a201d337b9b31f7eb2b52d091b02857061a8880371612d9534) >>> host-gmp 6.3.0 Collecting legal info COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-libiberty 2.41 Collecting legal info COPYING.LIB: OK (sha256: 56bdea73b6145ef6ac5259b3da390b981d840c24cb03b8e1cbc678de7ecfa18d) >>> host-zlib Collecting legal info >>> host-libzlib 1.3.1 Collecting legal info LICENSE: OK (sha256: 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243) >>> hicolor-icon-theme 0.17 Collecting legal info COPYING: OK (sha256: b0a64377d4ee87b7dbcf418ce4fb33ec3b2d7081b6732890e4af06b8118c4526) >>> json-for-modern-cpp 3.11.3 Collecting legal info LICENSE.MIT: OK (sha256: 86b998c792894ccb911a1cb7994f7a9652894e7a094c0b5e45be2f553f45cf14) >>> host-cmake 3.28.3 Collecting legal info Copyright.txt: OK (sha256: 4a01ccf2dc580ba570d02bc015bbe0ec92f1f318717aae9540ba841ba7946756) >>> knock 0.8 Collecting legal info COPYING: OK (sha256: d747e19206e41702e40822dd91d37cbf40edd86f364ea416d667a0e3013f7189) >>> host-automake 1.16.5 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> less 643 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> libao 1.2.0 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> libbroadvoice f65b0f50c8c767229fbf1758370880abc0d78564 Collecting legal info COPYING: OK (sha256: 2550586c993ce4a8c23c8b11968ea36192116a896a2504799cc65307d769c094) >>> libcoap 4.3.4 Collecting legal info COPYING: OK (sha256: 09dd86a017bad210527085008cbf706609c58210897b69845af14099577e7eb7) LICENSE: OK (sha256: bdd94ddd8e75010aebd045ead1c951110788003395c708811d6960248acb3891) >>> libevent 2.1.12 Collecting legal info LICENSE: OK (sha256: ff02effc9b331edcdac387d198691bfa3e575e7d244ad10cb826aa51ef085670) >>> libid3tag 0.15.1b Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) COPYRIGHT: OK (sha256: 7f12ad28dc075763e91b91bfa60fad04062380011ddad8f6bac21dd7b1f44367) >>> host-gperf 3.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> libmad 0.15.1b Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> libmnl 1.0.5 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libmodplug d1b97ed0020bc620a059d3675d1854b40bd2608d Collecting legal info COPYING: OK (sha256: 49942e7b3b175f549e751feb08b5270ca6f6c5fb7a1be9f9517db275ec32c92e) >>> libopusenc 0.2.1 Collecting legal info COPYING: OK (sha256: 93b17ab56b8230127fea532be0dcb4e6d71e66ab5e8ce5d6ae8785d7288b164f) >>> opus 1.4 Collecting legal info COPYING: OK (sha256: 8338ce8d922bb4416ce3dd1e5680173332435e3f0755007ac7801ccd674fe682) >>> libyaml 0.2.5 Collecting legal info License: OK (sha256: c40112449f254b9753045925248313e9270efa36d226b22d82d4cc6c43c57f29) >>> linux-firmware 20240115 Collecting legal info LICENCE.Marvell: OK (sha256: 2d6062d63b91eb750bf741498691604f75184b9fee97608ec537cd09bd6a42b4) LICENCE.Marvell: OK (sha256: 2d6062d63b91eb750bf741498691604f75184b9fee97608ec537cd09bd6a42b4) LICENCE.atheros_firmware: OK (sha256: 802b7014b26c606cf6248ae8b0ab1ce6d2d1b0db236d38dd269e676cd70710f2) LICENCE.microchip: OK (sha256: 0fc67bd715b3395f3f2af464781910e9e69c4ba23da304352229b42dc9e986c3) LICENSE.amlogic: OK (sha256: 8c4f2bd742da678336ca582ac46ee203d75d77ce928797caed032ee0e3a2c7dd) WHENCE: OK (sha256: 92d477fe15d81875bc5bcc4c54df7e95b65f42e4c44d64d840f39cd0aa153d6f) >>> linux-serial-test bf865c37ccf9cbb1826ada61037c036dc1990b7b Collecting legal info LICENSES/MIT: OK (sha256: a2a6760c2c6fa779a635e4a7ad00f668862ebcadb2a8a57d16662543e103e08c) >>> lldpd 1.0.17 Collecting legal info LICENSE: OK (sha256: 0e96a5aea65f16e2239231ce4ab90497f8bc3bb8fe6abe9299aade4726ff7c8d) >>> madplay 0.15.2b Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) COPYRIGHT: OK (sha256: 915bfd70548f31d11f9b4ffb21f343d1196af96c79d6aaac5663ea46c39dd3a3) >>> mdevd 0.1.6.0 Collecting legal info COPYING: OK (sha256: 7fe938b5e0fec18848955ca8081c532e24ae77310beb730b301e1f77bad3d390) >>> skalibs 2.12.0.1 Collecting legal info COPYING: OK (sha256: 35126cb8f2ff2a6e359f7bfec46c49004ead6304d8248ba67dcdebcc7d377754) >>> mdnsd 0.12 Collecting legal info LICENSE: OK (sha256: 2969546227b58ce1b431cc4c36c9a9b45d604e6b94fb8b787ea5d3696f3eee3b) >>> mg 3.7 Collecting legal info UNLICENSE: OK (sha256: 7e12e5df4bae12cb21581ba157ced20e1986a0508dd10d0e8a4ab9a4cf94e85c) >>> minizip-zlib 1.3.1 Collecting legal info LICENSE: OK (sha256: 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243) >>> modplugtools 0.5.3 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> mtr 0.95 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-omap-u-boot-utils 3f07426cddc0be9e24702e7aacc7574ddd7fba28 Collecting legal info COPYING: OK (sha256: 1080312c3230fb7dd32fe807ed8c8cd11f4061bf1a2f065b651630bfe30157b2) >>> host-patchelf 0.13 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> pcre2 10.43 Collecting legal info LICENCE: OK (sha256: 030087e2e8dd7c1bdd26057d25d4ded8f45bbf01ad458d68665ad04b8b0fbedf) >>> ptpd 1.1.0 Collecting legal info COPYRIGHT: OK (sha256: be69f30947abef91e0bce161005fe56b116b770e459e3e6980279349de47c366) >>> pugixml 1.14 Collecting legal info LICENSE.md: OK (sha256: 01e13f39d058cca09968f18d423912a18f8bf61b9161c65f8e5bcc418a8aba28) >>> putty 0.80 Collecting legal info LICENCE: OK (sha256: 7ede37f344ee03436c155a375ecb6cdb42a77105baa6e7804bf43260dc4a0c54) >>> host-python-cython 0.29.36 Collecting legal info COPYING.txt: OK (sha256: e1eb1c49a8508e8173dac30157e4a6439a44ad8846194746c424fbc3fc2b95d7) LICENSE.txt: OK (sha256: a6cba85bc92e0cff7a450b1d873c0eaa2e9fc96bf472df0247a26bec77bf3ff9) >>> host-python-installer 0.7.0 Collecting legal info LICENSE: OK (sha256: 37b8b9f2569892fa54406383d431169dbb2115980d78b7efba6eeae5664c484f) >>> host-python-flit-core 3.9.0 Collecting legal info LICENSE: OK (sha256: 35b4f1dec512e617077fd6980dbb43ef8c2887adc5d0185edb4c04da175dd816) >>> host-python3 3.11.8 Collecting legal info LICENSE: OK (sha256: 3b2f81fe21d181c499c59a256c8e1968455d6689d269aa85373bfb6af41da3bf) >>> host-autoconf-archive 2023.02.20 Collecting legal info COPYING: OK (sha256: e6037104443f9a7829b2aa7c5370d0789a7bda3ca65a0b904cdc0c2e285d9195) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libffi 3.4.6 Collecting legal info LICENSE: OK (sha256: 67894089811f93fca47a76f85e017da6f8582d4ba0905963c6e0f1ad6df7a195) >>> host-python-pypa-build 1.0.3 Collecting legal info LICENSE: OK (sha256: aaf9a29ca5907971ccf07de025375db34539a8d5eeebce20b46099805722106f) >>> host-python-packaging 23.2 Collecting legal info LICENSE: OK (sha256: cad1ef5bd340d73e074ba614d26f7deaca5c7940c3d8c34852e65c4909686c48) LICENSE.APACHE: OK (sha256: 0d542e0c8804e39aa7f37eb00da5a762149dc682d7829451287e11b938e94594) LICENSE.BSD: OK (sha256: b70e7e9b742f1cc6f948b34c16aa39ffece94196364bc88ff0d2180f0028fac5) >>> host-python-pyproject-hooks 1.0.0 Collecting legal info LICENSE: OK (sha256: 1b22b049b5267d6dfc23a67bf4a84d8ec04b9fdfb1a51d360e42b4342c8b4154) >>> host-python-setuptools 69.2.0 Collecting legal info LICENSE: OK (sha256: 86da0f01aeae46348a3c3d465195dc1ceccde79f79e87769a64b8da04b2a4741) >>> host-python-wheel 0.40.0 Collecting legal info LICENSE.txt: OK (sha256: 30c23618679108f3e8ea1d2a658c7ca417bdfc891c98ef1a89fa4ff0c9828654) >>> raspi-gpio 4edfde183ff3ac9ed66cdc015ae25e45f3a5502d Collecting legal info LICENSE: OK (sha256: 6e02227e1fb942687163996678d94add7911890c50025912d0ae7ee66d256bb2) >>> rtptools 1.22 Collecting legal info LICENSE: OK (sha256: f864592065e232c0b444ae9682a7a1a2c6aafe96712999f794bec24d4441a6a9) >>> host-runc 1.1.12 Collecting legal info LICENSE: OK (sha256: 552a739c3b25792263f731542238b92f6f8d07e9a488eae27e6c4690038a8243) >>> host-go 1.22.2 Collecting legal info LICENSE: OK (sha256: 2d36597f7117c38b006835ae7f537487207d8ec407aa9d9980794b2030cbc067) >>> host-go-bootstrap-stage3 1.21.8 Collecting legal info LICENSE: OK (sha256: 2d36597f7117c38b006835ae7f537487207d8ec407aa9d9980794b2030cbc067) >>> host-go-bootstrap-stage2 1.19.13 Collecting legal info LICENSE: OK (sha256: 2d36597f7117c38b006835ae7f537487207d8ec407aa9d9980794b2030cbc067) >>> host-go-bootstrap-stage1 1.4-bootstrap-20171003 Collecting legal info LICENSE: OK (sha256: dd26a7abddd02e2d0aba97805b31f248ef7835d9e10da289b22e3b8ab78b324d) >>> sl 5.02 Collecting legal info LICENSE: OK (sha256: 72c7d262e2c9ddf019edc90af852a01a410338efff4e75e1c005b77ada4be7c4) >>> spice-protocol 0.14.4 Collecting legal info COPYING: OK (sha256: eb55ea746be694c449224c7ddce6340648b075fd377281712a19094e7fb7ef92) >>> host-meson 1.3.1 Collecting legal info COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) >>> host-ninja 1.11.1.g95dee.kitware.jobserver-1 Collecting legal info COPYING: OK (sha256: eb7e9ab9690124c5c9f42bdc81383d886a3dede26345b6ed15bbad7caf81f7ea) >>> sslh 2.0.1 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> stb 8b5f1f37b5b75829fc72d38e7b5d4bcbf8a26d55 Collecting legal info LICENSE: OK (sha256: bebfe904b14301657e4e5d655c811d51fd31b97c455b9cc2d8600d6bac6cff63) >>> sudo 1.9.15p5 Collecting legal info LICENSE.md: OK (sha256: ea33b3971e8e4d9657cd6794a952aaa71b22bd16745f1645455b6ead010e0a28) >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Collecting legal info LICENSE: OK (sha256: a45d0bb572ed792ed34627a72621834b3ba92aab6e2cc4e04301dee7a728d753) >>> host-sg3_utils 1.48 Collecting legal info COPYING: OK (sha256: d212debdb0a5d7754c977f6dc53bb6c88b4ace7ab784ddbccd06bb970adb1a37) BSD_LICENSE: OK (sha256: 6b1a1de0b3394002973daaa407b93a1d2c13efd8dd1a32095d6872c36f09ba66) >>> wipe 2.3.1 Collecting legal info LICENSE: OK (sha256: 890cd89006bb57ce95b460e867c7bcc81d30cbc23067a9be4644bdac6882bc14) WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined) Legal info produced in /home/buildroot/instance-0/output-1/legal-info make: Leaving directory '/home/buildroot/instance-0/buildroot'