if( z ) z[point_offset*i] = -value; break; ^~ pj_transform.c:859:57: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if' if( z ) z[point_offset*i] = -value; break; ^~~~~ libtool: compile: /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -DPROJ_LIB=\"/usr/share/proj\" -DMUTEX_pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c jniproj.c -fPIC -DPIC -o .libs/jniproj.o /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -DPROJ_LIB=\"/usr/share/proj\" -DMUTEX_pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o gen_cheb.o gen_cheb.c /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -DPROJ_LIB=\"/usr/share/proj\" -DMUTEX_pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o p_series.o p_series.c /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -DPROJ_LIB=\"/usr/share/proj\" -DMUTEX_pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o nad2bin.o nad2bin.c /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -DPROJ_LIB=\"/usr/share/proj\" -DMUTEX_pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o geod.o geod.c /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -DPROJ_LIB=\"/usr/share/proj\" -DMUTEX_pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o geod_set.o geod_set.c libtool: compile: /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -DPROJ_LIB=\"/usr/share/proj\" -DMUTEX_pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c pj_mutex.c -fPIC -DPIC -o .libs/pj_mutex.o /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -DPROJ_LIB=\"/usr/share/proj\" -DMUTEX_pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o geod_interface.o geod_interface.c /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -DPROJ_LIB=\"/usr/share/proj\" -DMUTEX_pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o cs2cs.o cs2cs.c libtool: compile: /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -DPROJ_LIB=\"/usr/share/proj\" -DMUTEX_pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c pj_initcache.c -fPIC -DPIC -o .libs/pj_initcache.o libtool: compile: /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -DPROJ_LIB=\"/usr/share/proj\" -DMUTEX_pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c pj_apply_vgridshift.c -fPIC -DPIC -o .libs/pj_apply_vgridshift.o libtool: compile: /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -DPROJ_LIB=\"/usr/share/proj\" -DMUTEX_pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c geodesic.c -fPIC -DPIC -o .libs/geodesic.o libtool: compile: /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -DPROJ_LIB=\"/usr/share/proj\" -DMUTEX_pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c pj_strtod.c -fPIC -DPIC -o .libs/pj_strtod.o /bin/sh ../libtool --tag=CC --mode=link /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -no-undefined -version-info 12:0:0 -o libproj.la -rpath /usr/lib PJ_aeqd.lo PJ_gnom.lo PJ_laea.lo PJ_mod_ster.lo PJ_nsper.lo PJ_nzmg.lo PJ_ortho.lo PJ_stere.lo PJ_sterea.lo PJ_aea.lo PJ_bipc.lo PJ_bonne.lo PJ_eqdc.lo PJ_isea.lo PJ_imw_p.lo PJ_krovak.lo PJ_lcc.lo PJ_poly.lo PJ_rpoly.lo PJ_sconics.lo proj_rouss.lo PJ_cass.lo PJ_cc.lo PJ_cea.lo PJ_eqc.lo PJ_gall.lo PJ_labrd.lo PJ_lsat.lo PJ_misrsom.lo PJ_merc.lo PJ_mill.lo PJ_ocea.lo PJ_omerc.lo PJ_somerc.lo PJ_tcc.lo PJ_tcea.lo PJ_times.lo PJ_tmerc.lo PJ_airy.lo PJ_aitoff.lo PJ_august.lo PJ_bacon.lo PJ_chamb.lo PJ_hammer.lo PJ_lagrng.lo PJ_larr.lo PJ_lask.lo PJ_nocol.lo PJ_ob_tran.lo PJ_oea.lo PJ_tpeqd.lo PJ_vandg.lo PJ_vandg2.lo PJ_vandg4.lo PJ_wag7.lo PJ_lcca.lo PJ_geos.lo proj_etmerc.lo PJ_boggs.lo PJ_collg.lo PJ_comill.lo PJ_crast.lo PJ_denoy.lo PJ_eck1.lo PJ_eck2.lo PJ_eck3.lo PJ_eck4.lo PJ_eck5.lo PJ_fahey.lo PJ_fouc_s.lo PJ_gins8.lo PJ_gstmerc.lo PJ_gn_sinu.lo PJ_goode.lo PJ_igh.lo PJ_hatano.lo PJ_loxim.lo PJ_mbt_fps.lo PJ_mbtfpp.lo PJ_mbtfpq.lo PJ_moll.lo PJ_nell.lo PJ_nell_h.lo PJ_patterson.lo PJ_putp2.lo PJ_putp3.lo PJ_putp4p.lo PJ_putp5.lo PJ_putp6.lo PJ_qsc.lo PJ_robin.lo PJ_sch.lo PJ_sts.lo PJ_urm5.lo PJ_urmfps.lo PJ_wag2.lo PJ_wag3.lo PJ_wink1.lo PJ_wink2.lo pj_latlong.lo pj_geocent.lo aasincos.lo adjlon.lo bch2bps.lo bchgen.lo biveval.lo dmstor.lo mk_cheby.lo pj_auth.lo pj_deriv.lo pj_ell_set.lo pj_ellps.lo pj_errno.lo pj_factors.lo pj_fwd.lo pj_init.lo pj_inv.lo pj_fwd3d.lo pj_inv3d.lo pj_list.lo pj_malloc.lo pj_mlfn.lo pj_msfn.lo proj_mdist.lo pj_open_lib.lo pj_param.lo pj_phi2.lo pj_pr_list.lo pj_qsfn.lo pj_generic_selftest.lo pj_run_selftests.lo pj_strerrno.lo pj_tsfn.lo pj_units.lo pj_ctx.lo pj_log.lo pj_zpoly1.lo rtodms.lo vector1.lo pj_release.lo pj_gauss.lo PJ_healpix.lo PJ_natearth.lo PJ_natearth2.lo PJ_calcofi.lo pj_fileapi.lo pj_gc_reader.lo pj_gridcatalog.lo nad_cvt.lo nad_init.lo nad_intr.lo emess.lo pj_apply_gridshift.lo pj_datums.lo pj_datum_set.lo pj_transform.lo geocent.lo pj_utils.lo pj_gridinfo.lo pj_gridlist.lo jniproj.lo pj_mutex.lo pj_initcache.lo pj_apply_vgridshift.lo geodesic.lo pj_strtod.lo -lpthread -lm libtool: link: /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -shared -fPIC -DPIC .libs/PJ_aeqd.o .libs/PJ_gnom.o .libs/PJ_laea.o .libs/PJ_mod_ster.o .libs/PJ_nsper.o .libs/PJ_nzmg.o .libs/PJ_ortho.o .libs/PJ_stere.o .libs/PJ_sterea.o .libs/PJ_aea.o .libs/PJ_bipc.o .libs/PJ_bonne.o .libs/PJ_eqdc.o .libs/PJ_isea.o .libs/PJ_imw_p.o .libs/PJ_krovak.o .libs/PJ_lcc.o .libs/PJ_poly.o .libs/PJ_rpoly.o .libs/PJ_sconics.o .libs/proj_rouss.o .libs/PJ_cass.o .libs/PJ_cc.o .libs/PJ_cea.o .libs/PJ_eqc.o .libs/PJ_gall.o .libs/PJ_labrd.o .libs/PJ_lsat.o .libs/PJ_misrsom.o .libs/PJ_merc.o .libs/PJ_mill.o .libs/PJ_ocea.o .libs/PJ_omerc.o .libs/PJ_somerc.o .libs/PJ_tcc.o .libs/PJ_tcea.o .libs/PJ_times.o .libs/PJ_tmerc.o .libs/PJ_airy.o .libs/PJ_aitoff.o .libs/PJ_august.o .libs/PJ_bacon.o .libs/PJ_chamb.o .libs/PJ_hammer.o .libs/PJ_lagrng.o .libs/PJ_larr.o .libs/PJ_lask.o .libs/PJ_nocol.o .libs/PJ_ob_tran.o .libs/PJ_oea.o .libs/PJ_tpeqd.o .libs/PJ_vandg.o .libs/PJ_vandg2.o .libs/PJ_vandg4.o .libs/PJ_wag7.o .libs/PJ_lcca.o .libs/PJ_geos.o .libs/proj_etmerc.o .libs/PJ_boggs.o .libs/PJ_collg.o .libs/PJ_comill.o .libs/PJ_crast.o .libs/PJ_denoy.o .libs/PJ_eck1.o .libs/PJ_eck2.o .libs/PJ_eck3.o .libs/PJ_eck4.o .libs/PJ_eck5.o .libs/PJ_fahey.o .libs/PJ_fouc_s.o .libs/PJ_gins8.o .libs/PJ_gstmerc.o .libs/PJ_gn_sinu.o .libs/PJ_goode.o .libs/PJ_igh.o .libs/PJ_hatano.o .libs/PJ_loxim.o .libs/PJ_mbt_fps.o .libs/PJ_mbtfpp.o .libs/PJ_mbtfpq.o .libs/PJ_moll.o .libs/PJ_nell.o .libs/PJ_nell_h.o .libs/PJ_patterson.o .libs/PJ_putp2.o .libs/PJ_putp3.o .libs/PJ_putp4p.o .libs/PJ_putp5.o .libs/PJ_putp6.o .libs/PJ_qsc.o .libs/PJ_robin.o .libs/PJ_sch.o .libs/PJ_sts.o .libs/PJ_urm5.o .libs/PJ_urmfps.o .libs/PJ_wag2.o .libs/PJ_wag3.o .libs/PJ_wink1.o .libs/PJ_wink2.o .libs/pj_latlong.o .libs/pj_geocent.o .libs/aasincos.o .libs/adjlon.o .libs/bch2bps.o .libs/bchgen.o .libs/biveval.o .libs/dmstor.o .libs/mk_cheby.o .libs/pj_auth.o .libs/pj_deriv.o .libs/pj_ell_set.o .libs/pj_ellps.o .libs/pj_errno.o .libs/pj_factors.o .libs/pj_fwd.o .libs/pj_init.o .libs/pj_inv.o .libs/pj_fwd3d.o .libs/pj_inv3d.o .libs/pj_list.o .libs/pj_malloc.o .libs/pj_mlfn.o .libs/pj_msfn.o .libs/proj_mdist.o .libs/pj_open_lib.o .libs/pj_param.o .libs/pj_phi2.o .libs/pj_pr_list.o .libs/pj_qsfn.o .libs/pj_generic_selftest.o .libs/pj_run_selftests.o .libs/pj_strerrno.o .libs/pj_tsfn.o .libs/pj_units.o .libs/pj_ctx.o .libs/pj_log.o .libs/pj_zpoly1.o .libs/rtodms.o .libs/vector1.o .libs/pj_release.o .libs/pj_gauss.o .libs/PJ_healpix.o .libs/PJ_natearth.o .libs/PJ_natearth2.o .libs/PJ_calcofi.o .libs/pj_fileapi.o .libs/pj_gc_reader.o .libs/pj_gridcatalog.o .libs/nad_cvt.o .libs/nad_init.o .libs/nad_intr.o .libs/emess.o .libs/pj_apply_gridshift.o .libs/pj_datums.o .libs/pj_datum_set.o .libs/pj_transform.o .libs/geocent.o .libs/pj_utils.o .libs/pj_gridinfo.o .libs/pj_gridlist.o .libs/jniproj.o .libs/pj_mutex.o .libs/pj_initcache.o .libs/pj_apply_vgridshift.o .libs/geodesic.o .libs/pj_strtod.o -lpthread -lm -Os -Wl,-soname -Wl,libproj.so.12 -o .libs/libproj.so.12.0.0 libtool: link: (cd ".libs" && rm -f "libproj.so.12" && ln -s "libproj.so.12.0.0" "libproj.so.12") libtool: link: (cd ".libs" && rm -f "libproj.so" && ln -s "libproj.so.12.0.0" "libproj.so") libtool: link: ( cd ".libs" && rm -f "libproj.la" && ln -s "../libproj.la" "libproj.la" ) /bin/sh ../libtool --tag=CC --mode=link /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -o proj proj.o gen_cheb.o p_series.o libproj.la -lpthread -lm /bin/sh ../libtool --tag=CC --mode=link /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -o nad2bin nad2bin.o libproj.la -lpthread -lm /bin/sh ../libtool --tag=CC --mode=link /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -o geod geod.o geod_set.o geod_interface.o libproj.la -lpthread -lm /bin/sh ../libtool --tag=CC --mode=link /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -o cs2cs cs2cs.o gen_cheb.o p_series.o libproj.la -lpthread -lm libtool: link: /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -o nad2bin nad2bin.o ./.libs/libproj.so -lpthread -lm -Wl,-rpath -Wl,/home/peko/autobuild/instance-0/output/build/proj-4.9.3/src/.libs libtool: link: /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -o geod geod.o geod_set.o geod_interface.o ./.libs/libproj.so -lpthread -lm -Wl,-rpath -Wl,/home/peko/autobuild/instance-0/output/build/proj-4.9.3/src/.libs libtool: link: /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -o proj proj.o gen_cheb.o p_series.o ./.libs/libproj.so -lpthread -lm -Wl,-rpath -Wl,/home/peko/autobuild/instance-0/output/build/proj-4.9.3/src/.libs libtool: link: /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -Wall -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -o cs2cs cs2cs.o gen_cheb.o p_series.o ./.libs/libproj.so -lpthread -lm -Wl,-rpath -Wl,/home/peko/autobuild/instance-0/output/build/proj-4.9.3/src/.libs Making all in man Making all in man1 make[4]: Nothing to be done for `all'. Making all in man3 make[4]: Nothing to be done for `all'. make[4]: Nothing to be done for `all-am'. Making all in nad make[3]: Nothing to be done for `all'. Making all in jniwrap Making all in org Making all in proj4 make[5]: Nothing to be done for `all'. make[5]: Nothing to be done for `all-am'. make[4]: Nothing to be done for `all-am'. Making all in cmake make[3]: Nothing to be done for `all'. make[3]: Nothing to be done for `all-am'. >>> proj 4.9.3 Installing to staging directory PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot install -C /home/peko/autobuild/instance-0/output/build/proj-4.9.3/ Making install in src rm -f /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/invproj (cd /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin; ln -s proj invproj) /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/lib' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/include' /bin/sh ../libtool --mode=install /usr/bin/install -c libproj.la '/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/lib' /usr/bin/install -c -m 644 proj_api.h projects.h geodesic.h org_proj4_Projections.h org_proj4_PJ.h '/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/include' rm -f /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/invgeod (cd /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin; ln -s geod invgeod) libtool: install: /usr/bin/install -c .libs/libproj.so.12.0.0 /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/lib/libproj.so.12.0.0 libtool: install: (cd /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libproj.so.12.0.0 libproj.so.12 || { rm -f libproj.so.12 && ln -s libproj.so.12.0.0 libproj.so.12; }; }) libtool: install: (cd /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libproj.so.12.0.0 libproj.so || { rm -f libproj.so && ln -s libproj.so.12.0.0 libproj.so; }; }) libtool: install: /usr/bin/install -c .libs/libproj.lai /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/lib/libproj.la libtool: warning: remember to run 'libtool --finish /usr/lib' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c proj nad2bin geod cs2cs '/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin' libtool: install: /usr/bin/install -c proj /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/proj libtool: install: /usr/bin/install -c nad2bin /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/nad2bin libtool: install: /usr/bin/install -c geod /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/geod libtool: install: /usr/bin/install -c cs2cs /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/cs2cs Making install in man Making install in man1 make[5]: Nothing to be done for `install-exec-am'. /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/share/man/man1' /usr/bin/install -c -m 644 geod.1 proj.1 cs2cs.1 '/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/share/man/man1' Making install in man3 make[5]: Nothing to be done for `install-exec-am'. /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/share/man/man3' /usr/bin/install -c -m 644 pj_init.3 geodesic.3 '/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/share/man/man3' make[5]: Nothing to be done for `install-exec-am'. make[5]: Nothing to be done for `install-data-am'. Making install in nad make[4]: Nothing to be done for `install-exec-am'. /bin/sh /home/peko/autobuild/instance-0/output/build/proj-4.9.3/install-sh -d /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/share/proj /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/share/proj' /usr/bin/install -c -m 644 GL27 nad.lst proj_def.dat nad27 nad83 world epsg esri esri.extra other.extra CH IGNF '/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/share/proj' nad2nad NADCON source files not present cd .. && /bin/sh ./config.status nad/install config.status: creating nad/install Making install in jniwrap Making install in org Making install in proj4 make[6]: Nothing to be done for `install-exec-am'. make[6]: Nothing to be done for `install-data-am'. make[6]: Nothing to be done for `install-exec-am'. make[6]: Nothing to be done for `install-data-am'. make[5]: Nothing to be done for `install-exec-am'. echo In jniwrap In jniwrap Making install in cmake make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Nothing to be done for `install-exec-am'. /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' /usr/bin/install -c -m 644 proj.pc '/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig' >>> proj 4.9.3 Fixing libtool files >>> proj 4.9.3 Installing to target PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-0/output/target install -C /home/peko/autobuild/instance-0/output/build/proj-4.9.3/ Making install in src rm -f /home/peko/autobuild/instance-0/output/target/usr/bin/invproj (cd /home/peko/autobuild/instance-0/output/target/usr/bin; ln -s proj invproj) /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/lib' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/include' /bin/sh ../libtool --mode=install /usr/bin/install -c libproj.la '/home/peko/autobuild/instance-0/output/target/usr/lib' /usr/bin/install -c -m 644 proj_api.h projects.h geodesic.h org_proj4_Projections.h org_proj4_PJ.h '/home/peko/autobuild/instance-0/output/target/usr/include' rm -f /home/peko/autobuild/instance-0/output/target/usr/bin/invgeod (cd /home/peko/autobuild/instance-0/output/target/usr/bin; ln -s geod invgeod) libtool: install: /usr/bin/install -c .libs/libproj.so.12.0.0 /home/peko/autobuild/instance-0/output/target/usr/lib/libproj.so.12.0.0 libtool: install: (cd /home/peko/autobuild/instance-0/output/target/usr/lib && { ln -s -f libproj.so.12.0.0 libproj.so.12 || { rm -f libproj.so.12 && ln -s libproj.so.12.0.0 libproj.so.12; }; }) libtool: install: (cd /home/peko/autobuild/instance-0/output/target/usr/lib && { ln -s -f libproj.so.12.0.0 libproj.so || { rm -f libproj.so && ln -s libproj.so.12.0.0 libproj.so; }; }) libtool: install: /usr/bin/install -c .libs/libproj.lai /home/peko/autobuild/instance-0/output/target/usr/lib/libproj.la libtool: warning: remember to run 'libtool --finish /usr/lib' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c proj nad2bin geod cs2cs '/home/peko/autobuild/instance-0/output/target/usr/bin' libtool: install: /usr/bin/install -c proj /home/peko/autobuild/instance-0/output/target/usr/bin/proj libtool: install: /usr/bin/install -c nad2bin /home/peko/autobuild/instance-0/output/target/usr/bin/nad2bin libtool: install: /usr/bin/install -c geod /home/peko/autobuild/instance-0/output/target/usr/bin/geod libtool: install: /usr/bin/install -c cs2cs /home/peko/autobuild/instance-0/output/target/usr/bin/cs2cs Making install in man Making install in man1 make[5]: Nothing to be done for `install-exec-am'. /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/man/man1' /usr/bin/install -c -m 644 geod.1 proj.1 cs2cs.1 '/home/peko/autobuild/instance-0/output/target/usr/share/man/man1' Making install in man3 make[5]: Nothing to be done for `install-exec-am'. /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/man/man3' /usr/bin/install -c -m 644 pj_init.3 geodesic.3 '/home/peko/autobuild/instance-0/output/target/usr/share/man/man3' make[5]: Nothing to be done for `install-exec-am'. make[5]: Nothing to be done for `install-data-am'. Making install in nad make[4]: Nothing to be done for `install-exec-am'. /bin/sh /home/peko/autobuild/instance-0/output/build/proj-4.9.3/install-sh -d /home/peko/autobuild/instance-0/output/target/usr/share/proj /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/proj' /usr/bin/install -c -m 644 GL27 nad.lst proj_def.dat nad27 nad83 world epsg esri esri.extra other.extra CH IGNF '/home/peko/autobuild/instance-0/output/target/usr/share/proj' nad2nad NADCON source files not present cd .. && /bin/sh ./config.status nad/install config.status: creating nad/install Making install in jniwrap Making install in org Making install in proj4 make[6]: Nothing to be done for `install-exec-am'. make[6]: Nothing to be done for `install-data-am'. make[6]: Nothing to be done for `install-exec-am'. make[6]: Nothing to be done for `install-data-am'. make[5]: Nothing to be done for `install-exec-am'. echo In jniwrap In jniwrap Making install in cmake make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Nothing to be done for `install-exec-am'. /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/lib/pkgconfig' /usr/bin/install -c -m 644 proj.pc '/home/peko/autobuild/instance-0/output/target/usr/lib/pkgconfig' ubus-34c6e818e431cc53478a0f7c7c1eca07d194d692.tar.gz: OK (sha256: 93ef2612853641ca8d16d07527115c72ed03f8eaa1c727a01b069a4e814247c0) >>> ubus 34c6e818e431cc53478a0f7c7c1eca07d194d692 Extracting gzip -d -c /home/peko/autobuild/instance-0/dl/ubus-34c6e818e431cc53478a0f7c7c1eca07d194d692.tar.gz | tar --strip-components=1 -C /home/peko/autobuild/instance-0/output/build/ubus-34c6e818e431cc53478a0f7c7c1eca07d194d692 -xf - >>> ubus 34c6e818e431cc53478a0f7c7c1eca07d194d692 Patching Applying 0001-Install-server-and-client-examples.patch using patch: patching file examples/CMakeLists.txt >>> ubus 34c6e818e431cc53478a0f7c7c1eca07d194d692 Configuring (mkdir -p /home/peko/autobuild/instance-0/output/build/ubus-34c6e818e431cc53478a0f7c7c1eca07d194d692/ && cd /home/peko/autobuild/instance-0/output/build/ubus-34c6e818e431cc53478a0f7c7c1eca07d194d692/ && rm -f CMakeCache.txt && PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/cmake3 /home/peko/autobuild/instance-0/output/build/ubus-34c6e818e431cc53478a0f7c7c1eca07d194d692/ -DCMAKE_TOOLCHAIN_FILE="/home/peko/autobuild/instance-0/output/host/share/buildroot/toolchainfile.cmake" -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DBUILD_SHARED_LIBS=ON -DBUILD_LUA=OFF -DENABLE_SYSTEMD=OFF -DBUILD_EXAMPLES=OFF ) -- The C compiler identification is GNU 6.4.0 -- Check for working C compiler: /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -- Check for working C compiler: /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features -- Detecting C compile features - done -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: BUILD_DOC BUILD_DOCS BUILD_EXAMPLE BUILD_TEST BUILD_TESTING BUILD_TESTS ENABLE_SYSTEMD -- Build files have been written to: /home/peko/autobuild/instance-0/output/build/ubus-34c6e818e431cc53478a0f7c7c1eca07d194d692 >>> ubus 34c6e818e431cc53478a0f7c7c1eca07d194d692 Building PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 -C /home/peko/autobuild/instance-0/output/build/ubus-34c6e818e431cc53478a0f7c7c1eca07d194d692/ Scanning dependencies of target ubusd Scanning dependencies of target ubus [ 11%] Building C object CMakeFiles/ubusd.dir/ubusd_proto.c.o [ 23%] Building C object CMakeFiles/ubusd.dir/ubusd_acl.c.o [ 23%] Building C object CMakeFiles/ubusd.dir/ubusd_monitor.c.o [ 29%] Building C object CMakeFiles/ubusd.dir/ubusd_event.c.o [ 29%] Building C object CMakeFiles/ubusd.dir/ubusd.c.o [ 47%] Building C object CMakeFiles/ubusd.dir/ubusd_id.c.o [ 47%] Building C object CMakeFiles/ubusd.dir/ubusd_obj.c.o [ 52%] Building C object CMakeFiles/ubus.dir/libubus-sub.c.o [ 58%] Building C object CMakeFiles/ubus.dir/libubus-acl.c.o [ 64%] Building C object CMakeFiles/ubus.dir/libubus-obj.c.o [ 70%] Building C object CMakeFiles/ubus.dir/libubus.c.o [ 76%] Building C object CMakeFiles/ubus.dir/libubus-io.c.o [ 76%] Building C object CMakeFiles/ubus.dir/libubus-req.c.o [ 82%] Linking C shared library libubus.so [ 88%] Linking C executable ubusd [ 88%] Built target ubus Scanning dependencies of target cli [ 88%] Built target ubusd [ 94%] Building C object CMakeFiles/cli.dir/cli.c.o [100%] Linking C executable ubus [100%] Built target cli >>> ubus 34c6e818e431cc53478a0f7c7c1eca07d194d692 Installing to staging directory PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot install/fast -C /home/peko/autobuild/instance-0/output/build/ubus-34c6e818e431cc53478a0f7c7c1eca07d194d692/ Install the project... -- Install configuration: "Release" -- Installing: /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/lib/libubus.so -- Installing: /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/ubus -- Set runtime path of "/home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/ubus" to "" -- Installing: /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/sbin/ubusd -- Installing: /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/include/ubusmsg.h -- Installing: /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/include/ubus_common.h -- Installing: /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/include/libubus.h >>> ubus 34c6e818e431cc53478a0f7c7c1eca07d194d692 Fixing libtool files >>> ubus 34c6e818e431cc53478a0f7c7c1eca07d194d692 Installing to target PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-0/output/target install/fast -C /home/peko/autobuild/instance-0/output/build/ubus-34c6e818e431cc53478a0f7c7c1eca07d194d692/ Install the project... -- Install configuration: "Release" -- Installing: /home/peko/autobuild/instance-0/output/target/usr/lib/libubus.so -- Installing: /home/peko/autobuild/instance-0/output/target/usr/bin/ubus -- Set runtime path of "/home/peko/autobuild/instance-0/output/target/usr/bin/ubus" to "" -- Installing: /home/peko/autobuild/instance-0/output/target/usr/sbin/ubusd -- Installing: /home/peko/autobuild/instance-0/output/target/usr/include/ubusmsg.h -- Installing: /home/peko/autobuild/instance-0/output/target/usr/include/ubus_common.h -- Installing: /home/peko/autobuild/instance-0/output/target/usr/include/libubus.h ympd-v1.2.3.tar.gz: OK (sha256: 092c26c51166d1d1f025cd06742981783dea7e42bfe4f73f10c4418fc003de94) >>> ympd v1.2.3 Extracting gzip -d -c /home/peko/autobuild/instance-0/dl/ympd-v1.2.3.tar.gz | tar --strip-components=1 -C /home/peko/autobuild/instance-0/output/build/ympd-v1.2.3 -xf - >>> ympd v1.2.3 Patching Applying 0002-only-c-language.patch using patch: patching file CMakeLists.txt >>> ympd v1.2.3 Configuring (mkdir -p /home/peko/autobuild/instance-0/output/build/ympd-v1.2.3/ && cd /home/peko/autobuild/instance-0/output/build/ympd-v1.2.3/ && rm -f CMakeCache.txt && PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/cmake3 /home/peko/autobuild/instance-0/output/build/ympd-v1.2.3/ -DCMAKE_TOOLCHAIN_FILE="/home/peko/autobuild/instance-0/output/host/share/buildroot/toolchainfile.cmake" -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DBUILD_SHARED_LIBS=ON -DMKDATA_EXE=/home/peko/autobuild/instance-0/output/build/ympd-v1.2.3/mkdata ) -- The C compiler identification is GNU 6.4.0 -- Check for working C compiler: /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -- Check for working C compiler: /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-gcc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features -- Detecting C compile features - done -- Found PkgConfig: /home/peko/autobuild/instance-0/output/host/bin/pkg-config (found version "0.28") -- Found LibMPDClient: /home/peko/autobuild/instance-0/output/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/lib/libmpdclient.so -- Looking for pthread.h -- Looking for pthread.h - found -- Looking for pthread_create -- Looking for pthread_create - found -- Found Threads: TRUE -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: BUILD_DOC BUILD_DOCS BUILD_EXAMPLE BUILD_EXAMPLES BUILD_TEST BUILD_TESTING BUILD_TESTS -- Build files have been written to: /home/peko/autobuild/instance-0/output/build/ympd-v1.2.3 >>> ympd v1.2.3 Building /usr/bin/gcc -O2 -I/home/peko/autobuild/instance-0/output/host/include /home/peko/autobuild/instance-0/output/build/ympd-v1.2.3/htdocs/mkdata.c -o /home/peko/autobuild/instance-0/output/build/ympd-v1.2.3/mkdata PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 -C /home/peko/autobuild/instance-0/output/build/ympd-v1.2.3/ [ 12%] Generating assets.c Scanning dependencies of target ympd [ 25%] Building C object CMakeFiles/ympd.dir/assets.c.o [ 37%] Building C object CMakeFiles/ympd.dir/src/http_server.c.o [ 62%] Building C object CMakeFiles/ympd.dir/src/mongoose.c.o [ 62%] Building C object CMakeFiles/ympd.dir/src/json_encode.c.o [ 87%] Building C object CMakeFiles/ympd.dir/src/ympd.c.o [ 87%] Building C object CMakeFiles/ympd.dir/src/mpd_client.c.o [100%] Linking C executable ympd [100%] Built target ympd >>> ympd v1.2.3 Installing to target PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-0/output/target install/fast -C /home/peko/autobuild/instance-0/output/build/ympd-v1.2.3/ Install the project... -- Install configuration: "Release" -- Installing: /home/peko/autobuild/instance-0/output/target/usr/bin/ympd -- Installing: /home/peko/autobuild/instance-0/output/target/usr/share/man/man1/ympd.1 >>> Finalizing target directory # Check files that are touched by more than one package ./support/scripts/check-uniq-files -t target /home/peko/autobuild/instance-0/output/build/packages-file-list.txt Warning: target file "./usr/share/info/dir" is touched by more than one package: ['enscript', 'libffi'] ./support/scripts/check-uniq-files -t staging /home/peko/autobuild/instance-0/output/build/packages-file-list-staging.txt ./support/scripts/check-uniq-files -t host /home/peko/autobuild/instance-0/output/build/packages-file-list-host.txt Warning: host file "./lib/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/plugin/include/auto-host.h" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/microblazeel-linux-cpp.br_real" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/install-tools/include/limits.h" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/microblazeel-linux-gcov-tool" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./libexec/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/lto-wrapper" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/microblazeel-linux-gcc.br_real" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/include-fixed/limits.h" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/microblazeel-linux-gcc-6.4.0.br_real" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./libexec/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/lto1" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/crtbeginT.o" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./share/info/dir" is touched by more than one package: ['host-lzip', 'host-binutils', 'host-m4', 'host-gmp', 'host-mpfr', 'host-mpc', 'host-gcc-initial', 'host-gcc-final', 'host-bison', 'host-libtool', 'host-autoconf', 'host-automake', 'host-gettext'] Warning: host file "./lib/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/libgcov.a" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/plugin/include/configargs.h" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/microblazeel-buildroot-linux-uclibc-gcov-dump" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/microblazeel-buildroot-linux-uclibc-gcc.br_real" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./libexec/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/collect2" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/libgcc.a" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/microblazeel-buildroot-linux-uclibc-gcov-tool" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/crtbegin.o" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./lib/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/crtbeginS.o" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/microblazeel-linux-gcov" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/microblazeel-buildroot-linux-uclibc-cpp.br_real" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/microblazeel-buildroot-linux-uclibc-gcc-6.4.0.br_real" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/microblazeel-buildroot-linux-uclibc-gcov" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./libexec/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/cc1" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] Warning: host file "./bin/microblazeel-linux-gcov-dump" is touched by more than one package: ['host-gcc-initial', 'host-gcc-final'] /usr/bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/peko/autobuild/instance-0/output/target/etc/inittab /usr/bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/peko/autobuild/instance-0/output/target/etc/inittab mkdir -p /home/peko/autobuild/instance-0/output/target/etc echo "buildroot" > /home/peko/autobuild/instance-0/output/target/etc/hostname /usr/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/peko/autobuild/instance-0/output/target/etc/hosts mkdir -p /home/peko/autobuild/instance-0/output/target/etc echo "Welcome to Buildroot" > /home/peko/autobuild/instance-0/output/target/etc/issue /usr/bin/sed -i -e s,^root:[^:]*:,root::, /home/peko/autobuild/instance-0/output/target/etc/shadow rm -f /home/peko/autobuild/instance-0/output/target/bin/sh rm -f /home/peko/autobuild/instance-0/output/build/locales.nopurge for i in C en_US locale-archive; do echo $i >> /home/peko/autobuild/instance-0/output/build/locales.nopurge; done for dir in ; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/peko/autobuild/instance-0/output/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/peko/autobuild/instance-0/output/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/peko/autobuild/instance-0/output/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/peko/autobuild/instance-0/output/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/peko/autobuild/instance-0/output/target/usr/include /home/peko/autobuild/instance-0/output/target/usr/share/aclocal \ /home/peko/autobuild/instance-0/output/target/usr/lib/pkgconfig /home/peko/autobuild/instance-0/output/target/usr/share/pkgconfig \ /home/peko/autobuild/instance-0/output/target/usr/lib/cmake /home/peko/autobuild/instance-0/output/target/usr/share/cmake find /home/peko/autobuild/instance-0/output/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/peko/autobuild/instance-0/output/target/lib/ /home/peko/autobuild/instance-0/output/target/usr/lib/ /home/peko/autobuild/instance-0/output/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f find: '/home/peko/autobuild/instance-0/output/target/usr/libexec/': No such file or directory rm -rf /home/peko/autobuild/instance-0/output/target/usr/share/gdb rm -rf /home/peko/autobuild/instance-0/output/target/usr/share/bash-completion rm -rf /home/peko/autobuild/instance-0/output/target/usr/share/zsh rm -rf /home/peko/autobuild/instance-0/output/target/usr/man /home/peko/autobuild/instance-0/output/target/usr/share/man rm -rf /home/peko/autobuild/instance-0/output/target/usr/info /home/peko/autobuild/instance-0/output/target/usr/share/info rm -rf /home/peko/autobuild/instance-0/output/target/usr/doc /home/peko/autobuild/instance-0/output/target/usr/share/doc rm -rf /home/peko/autobuild/instance-0/output/target/usr/share/gtk-doc rmdir /home/peko/autobuild/instance-0/output/target/usr/share 2>/dev/null || true find /home/peko/autobuild/instance-0/output/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/peko/autobuild/instance-0/output/target/lib/ -type f -name 'libpthread*.so*' | \ xargs -r /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-strip --remove-section=.comment --remove-section=.note --strip-debug find /home/peko/autobuild/instance-0/output/target/lib/ -type f -name 'ld-*.so*' | \ xargs -r /home/peko/autobuild/instance-0/output/host/bin/microblazeel-buildroot-linux-uclibc-strip --remove-section=.comment --remove-section=.note --strip-debug test -f /home/peko/autobuild/instance-0/output/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/peko/autobuild/instance-0/output/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/peko/autobuild/instance-0/output/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2018.02-git-00783-ga483c91"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2018.02-git"; \ echo "PRETTY_NAME=\"Buildroot 2018.02-git\"" \ ) > /home/peko/autobuild/instance-0/output/target/etc/os-release >>> Sanitizing RPATH in target tree /home/peko/autobuild/instance-0/buildroot/support/scripts/fix-rpath target make: Leaving directory `/home/peko/autobuild/instance-0/buildroot' make: Entering directory `/home/peko/autobuild/instance-0/buildroot' >>> Buildroot 2018.02-git-00783-ga483c91 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> host-lzip 1.19 Collecting legal info ERROR: No hash found for COPYING >>> toolchain-buildroot Collecting legal info >>> host-gcc-final 6.4.0 Collecting legal info >>> host-binutils 2.28.1 Collecting legal info ERROR: No hash found for COPYING3 ERROR: No hash found for COPYING.LIB >>> host-gmp 6.1.2 Collecting legal info ERROR: No hash found for COPYING.LESSERv3 ERROR: No hash found for COPYINGv2 >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-mpc 1.0.3 Collecting legal info ERROR: No hash found for COPYING.LESSER >>> host-mpfr 3.1.6 Collecting legal info ERROR: No hash found for COPYING.LESSER >>> uclibc 1.0.27 Collecting legal info ERROR: No hash found for COPYING.LIB >>> host-gcc-initial 6.4.0 Collecting legal info >>> linux-headers 4.14.14 Collecting legal info WARNING: no hash file for COPYING >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain Collecting legal info >>> acpica 20170531 Collecting legal info ERROR: No hash found for source/include/acpi.h >>> host-bison 3.0.4 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> host-autoconf 2.69 Collecting legal info ERROR: No hash found for COPYINGv3 ERROR: No hash found for COPYING.EXCEPTION >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-gettext 0.19.8.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) ERROR: No hash found for gettext-runtime/intl/COPYING.LIB >>> host-libxml2 2.9.7 Collecting legal info COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd) >>> host-pkgconf 0.9.12 Collecting legal info ERROR: No hash found for COPYING >>> busybox 1.27.2 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) >>> daq 2.0.6 Collecting legal info COPYING: OK (sha256: 07f28289c09fd9eb5a6ff7bc710ff40363601b1bbc6f3637d8ed412150e90819) >>> enscript 1.6.6 Collecting legal info ERROR: No hash found for COPYING >>> execline 2.3.0.4 Collecting legal info COPYING: OK (sha256: 6ee77e7199d69b707ab864ea7a838f9562717aaa41c89413bdb2cf835f95052f) >>> skalibs 2.6.3.1 Collecting legal info COPYING: OK (sha256: 3eadcf980c40da0f257b8292d805ff41e5e5a908c1942315d9a627732e1aa012) >>> flot 0.8.3 Collecting legal info ERROR: No hash found for LICENSE.txt >>> haveged 1.9.1 Collecting legal info ERROR: No hash found for COPYING >>> initscripts Collecting legal info >>> jquery 1.11.2 Collecting legal info >>> json-c 0.13 Collecting legal info COPYING: OK (sha256: 74c1e6ca5eba76b54d0ad00d4815c8315c1b3bc45ff99de61d103dc92486284c) >>> libdcadec v0.2.0 Collecting legal info ERROR: No hash found for COPYING.LGPLv2.1 >>> libffi 3.2.1 Collecting legal info LICENSE: OK (sha256: 0f4d7a0bfb83c37465d42dc305f124189196cc0cc2cc8d6f8461103682aebbc5) >>> libiconv 1.15 Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for COPYING.LIB >>> libid3tag 0.15.1b Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for COPYRIGHT >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> libmicrohttpd 0.9.57 Collecting legal info COPYING: OK (sha256: 70e12e2a60151b9ed1a4c94a5ffeb99cd086fa94542b5a92fec581506e8d3121) >>> libmnl 1.0.4 Collecting legal info ERROR: No hash found for COPYING >>> libmpdclient 2.10 Collecting legal info ERROR: No hash found for COPYING >>> libnetfilter_log 1.0.1 Collecting legal info ERROR: No hash found for COPYING >>> libnfnetlink 1.0.1 Collecting legal info ERROR: No hash found for COPYING >>> libtasn1 4.12 Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for COPYING.LIB >>> libubox 723730214732862de7e892bae2f7a7889e66bf1b Collecting legal info >>> lvm2 2.02.173 Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for COPYING.LIB >>> host-opkg-utils 0.3.4 Collecting legal info ERROR: No hash found for COPYING >>> p11-kit 0.23.2 Collecting legal info ERROR: No hash found for COPYING >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> pppd 2.4.7 Collecting legal info ERROR: No hash found for pppd/tdb.c ERROR: No hash found for pppd/plugins/pppoatm/COPYING ERROR: No hash found for pppdump/bsd-comp.c ERROR: No hash found for pppd/ccp.c ERROR: No hash found for pppd/plugins/passprompt.c >>> proj 4.9.3 Collecting legal info COPYING: OK (sha256: 2dcac4af6990093ef48b896bfb81452d46a31b08d46cce34b27e83f93b2e37f6) >>> ubus 34c6e818e431cc53478a0f7c7c1eca07d194d692 Collecting legal info ERROR: No hash found for ubusd_acl.h >>> ympd v1.2.3 Collecting legal info ERROR: No hash found for LICENSE WARNING: the Buildroot source code has not been saved WARNING: gcc-final-6.4.0: cannot save license (HOST_GCC_FINAL_LICENSE_FILES not defined) WARNING: gcc-initial-6.4.0: cannot save license (HOST_GCC_INITIAL_LICENSE_FILES not defined) WARNING: jquery-1.11.2: cannot save license (JQUERY_LICENSE_FILES not defined) WARNING: libubox-723730214732862de7e892bae2f7a7889e66bf1b: cannot save license (LIBUBOX_LICENSE_FILES not defined) Legal info produced in /home/peko/autobuild/instance-0/output/legal-info make: Leaving directory `/home/peko/autobuild/instance-0/buildroot'