From cli: "no match ipv6 address prefix-list WORD" to New cli: "no match ipv6 address prefix-list"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD
Duplicate CLI Function: set_metric_cmd
	From cli: "set metric <0-4294967295>" to New cli: "set metric <0-4294967295>"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD
Duplicate CLI Function: no_set_metric_val_cmd
	From cli: "no set metric <0-4294967295>" to New cli: "no set metric <0-4294967295>"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD
Duplicate CLI Function: no_set_metric_cmd
	From cli: "no set metric" to New cli: "no set metric"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_ISISD
Duplicate CLI Function: match_ip_next_hop_prefix_list_cmd
	From cli: "match ip next-hop prefix-list WORD" to New cli: "match ip next-hop prefix-list WORD"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: no_match_ip_next_hop_prefix_list_cmd
	From cli: "no match ip next-hop prefix-list" to New cli: "no match ip next-hop prefix-list"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: no_match_ip_next_hop_prefix_list_val_cmd
	From cli: "no match ip next-hop prefix-list WORD" to New cli: "no match ip next-hop prefix-list WORD"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: match_ip_address_cmd
	From cli: "match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "match ip address (<1-199>|<1300-2699>|WORD)"
	Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: no_match_ip_address_cmd
	From cli: "no match ip address" to New cli: "no match ip address"
	Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: no_match_ip_address_val_cmd
	From cli: "no match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip address (<1-199>|<1300-2699>|WORD)"
	Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: match_ip_address_prefix_list_cmd
	From cli: "match ip address prefix-list WORD" to New cli: "match ip address prefix-list WORD"
	Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: no_match_ip_address_prefix_list_cmd
	From cli: "no match ip address prefix-list" to New cli: "no match ip address prefix-list"
	Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: no_match_ip_address_prefix_list_val_cmd
	From cli: "no match ip address prefix-list WORD" to New cli: "no match ip address prefix-list WORD"
	Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: match_tag_cmd
	From cli: "match tag <1-4294967295>" to New cli: "match tag <1-4294967295>"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: no_match_tag_cmd
	From cli: "no match tag" to New cli: "no match tag"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: no_match_tag_val_cmd
	From cli: "no match tag <1-4294967295>" to New cli: "no match tag <1-4294967295>"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: set_metric_cmd
	From cli: "set metric <0-4294967295>" to New cli: "set metric <0-4294967295>"
	Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: no_set_metric_cmd
	From cli: "no set metric" to New cli: "no set metric"
	Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: no_set_metric_val_cmd
	From cli: "no set metric <0-4294967295>" to New cli: "no set metric <0-4294967295>"
	Original Protocol: VTYSH_ISISD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: set_tag_cmd
	From cli: "set tag <1-4294967295>" to New cli: "set tag <1-4294967295>"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: no_set_tag_cmd
	From cli: "no set tag" to New cli: "no set tag"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: no_set_tag_val_cmd
	From cli: "no set tag <1-4294967295>" to New cli: "no set tag <1-4294967295>"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_OSPFD
Duplicate CLI Function: set_metric_cmd
	From cli: "set metric <0-4294967295>" to New cli: "set metric <0-4294967295>"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_OSPF6D
Duplicate CLI Function: no_set_metric_cmd
	From cli: "no set metric" to New cli: "no set metric"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_OSPF6D
Duplicate CLI Function: no_set_metric_val_cmd
	From cli: "no set metric <0-4294967295>" to New cli: "no set metric <0-4294967295>"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_OSPF6D
Duplicate CLI Function: match_metric_cmd
	From cli: "match metric <0-4294967295>" to New cli: "match metric <0-4294967295>"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_match_metric_cmd
	From cli: "no match metric" to New cli: "no match metric"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_match_metric_val_cmd
	From cli: "no match metric <0-4294967295>" to New cli: "no match metric <0-4294967295>"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: match_interface_cmd
	From cli: "match interface WORD" to New cli: "match interface WORD"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_match_interface_cmd
	From cli: "no match interface" to New cli: "no match interface"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_match_interface_val_cmd
	From cli: "no match interface WORD" to New cli: "no match interface WORD"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: match_ip_next_hop_cmd
	From cli: "match ip next-hop (<1-199>|<1300-2699>|WORD)" to New cli: "match ip next-hop (<1-199>|<1300-2699>|WORD)"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_match_ip_next_hop_cmd
	From cli: "no match ip next-hop" to New cli: "no match ip next-hop"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_match_ip_next_hop_val_cmd
	From cli: "no match ip next-hop (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip next-hop (<1-199>|<1300-2699>|WORD)"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: match_ip_next_hop_prefix_list_cmd
	From cli: "match ip next-hop prefix-list WORD" to New cli: "match ip next-hop prefix-list WORD"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_match_ip_next_hop_prefix_list_cmd
	From cli: "no match ip next-hop prefix-list" to New cli: "no match ip next-hop prefix-list"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_match_ip_next_hop_prefix_list_val_cmd
	From cli: "no match ip next-hop prefix-list WORD" to New cli: "no match ip next-hop prefix-list WORD"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: match_ip_address_cmd
	From cli: "match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "match ip address (<1-199>|<1300-2699>|WORD)"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_match_ip_address_cmd
	From cli: "no match ip address" to New cli: "no match ip address"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_match_ip_address_val_cmd
	From cli: "no match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip address (<1-199>|<1300-2699>|WORD)"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: match_ip_address_prefix_list_cmd
	From cli: "match ip address prefix-list WORD" to New cli: "match ip address prefix-list WORD"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_match_ip_address_prefix_list_cmd
	From cli: "no match ip address prefix-list" to New cli: "no match ip address prefix-list"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_match_ip_address_prefix_list_val_cmd
	From cli: "no match ip address prefix-list WORD" to New cli: "no match ip address prefix-list WORD"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: match_tag_cmd
	From cli: "match tag <1-4294967295>" to New cli: "match tag <1-4294967295>"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_match_tag_cmd
	From cli: "no match tag" to New cli: "no match tag"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_match_tag_val_cmd
	From cli: "no match tag <1-4294967295>" to New cli: "no match tag <1-4294967295>"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: set_metric_cmd
	From cli: "set metric <0-4294967295>" to New cli: "set metric <0-4294967295>"
	Original Protocol: VTYSH_OSPF6D to New Protocol: VTYSH_RIPD
Duplicate CLI Function: set_metric_addsub_cmd
	From cli: "set metric <+/-metric>" to New cli: "set metric <+/-metric>"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_set_metric_cmd
	From cli: "no set metric" to New cli: "no set metric"
	Original Protocol: VTYSH_OSPF6D to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_set_metric_val_cmd
	From cli: "no set metric <0-4294967295>" to New cli: "no set metric <0-4294967295>"
	Original Protocol: VTYSH_OSPF6D to New Protocol: VTYSH_RIPD
Duplicate CLI Function: set_ip_nexthop_cmd
	From cli: "set ip next-hop A.B.C.D" to New cli: "set ip next-hop A.B.C.D"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_set_ip_nexthop_cmd
	From cli: "no set ip next-hop" to New cli: "no set ip next-hop"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_set_ip_nexthop_val_cmd
	From cli: "no set ip next-hop A.B.C.D" to New cli: "no set ip next-hop A.B.C.D"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: set_tag_cmd
	From cli: "set tag <1-4294967295>" to New cli: "set tag <1-4294967295>"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_set_tag_cmd
	From cli: "no set tag" to New cli: "no set tag"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_set_tag_val_cmd
	From cli: "no set tag <1-4294967295>" to New cli: "no set tag <1-4294967295>"
	Original Protocol: VTYSH_OSPFD to New Protocol: VTYSH_RIPD
Duplicate CLI Function: router_zebra_cmd
	From cli: "router zebra" to New cli: "router zebra"
	Original Protocol: VTYSH_OSPF6D to New Protocol: VTYSH_RIPD
Duplicate CLI Function: no_router_zebra_cmd
	From cli: "no router zebra" to New cli: "no router zebra"
	Original Protocol: VTYSH_OSPF6D to New Protocol: VTYSH_RIPD
Duplicate CLI Function: match_metric_cmd
	From cli: "match metric <0-4294967295>" to New cli: "match metric <0-4294967295>"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_match_metric_cmd
	From cli: "no match metric" to New cli: "no match metric"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_match_metric_val_cmd
	From cli: "no match metric <0-4294967295>" to New cli: "no match metric <0-4294967295>"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: match_interface_cmd
	From cli: "match interface WORD" to New cli: "match interface WORD"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_match_interface_cmd
	From cli: "no match interface" to New cli: "no match interface"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_match_interface_val_cmd
	From cli: "no match interface WORD" to New cli: "no match interface WORD"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: match_tag_cmd
	From cli: "match tag <1-4294967295>" to New cli: "match tag <1-4294967295>"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_match_tag_cmd
	From cli: "no match tag" to New cli: "no match tag"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_match_tag_val_cmd
	From cli: "no match tag <1-4294967295>" to New cli: "no match tag <1-4294967295>"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: set_metric_cmd
	From cli: "set metric <0-4294967295>" to New cli: "set metric <0-4294967295>"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_set_metric_cmd
	From cli: "no set metric" to New cli: "no set metric"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_set_metric_val_cmd
	From cli: "no set metric <0-4294967295>" to New cli: "no set metric <0-4294967295>"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: set_ipv6_nexthop_local_cmd
	From cli: "set ipv6 next-hop local X:X::X:X" to New cli: "set ipv6 next-hop local X:X::X:X"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_set_ipv6_nexthop_local_cmd
	From cli: "no set ipv6 next-hop local" to New cli: "no set ipv6 next-hop local"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_set_ipv6_nexthop_local_val_cmd
	From cli: "no set ipv6 next-hop local X:X::X:X" to New cli: "no set ipv6 next-hop local X:X::X:X"
	Original Protocol: VTYSH_BGPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: set_tag_cmd
	From cli: "set tag <1-4294967295>" to New cli: "set tag <1-4294967295>"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_set_tag_cmd
	From cli: "no set tag" to New cli: "no set tag"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_set_tag_val_cmd
	From cli: "no set tag <1-4294967295>" to New cli: "no set tag <1-4294967295>"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: router_zebra_cmd
	From cli: "router zebra" to New cli: "router zebra"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: no_router_zebra_cmd
	From cli: "no router zebra" to New cli: "no router zebra"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_RIPNGD
Duplicate CLI Function: match_interface_cmd
	From cli: "match interface WORD" to New cli: "match interface WORD"
	Original Protocol: VTYSH_RIPNGD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_interface_cmd
	From cli: "no match interface" to New cli: "no match interface"
	Original Protocol: VTYSH_RIPNGD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_interface_val_cmd
	From cli: "no match interface WORD" to New cli: "no match interface WORD"
	Original Protocol: VTYSH_RIPNGD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: match_ip_next_hop_cmd
	From cli: "match ip next-hop (<1-199>|<1300-2699>|WORD)" to New cli: "match ip next-hop (<1-199>|<1300-2699>|WORD)"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_ip_next_hop_cmd
	From cli: "no match ip next-hop" to New cli: "no match ip next-hop"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_ip_next_hop_val_cmd
	From cli: "no match ip next-hop (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip next-hop (<1-199>|<1300-2699>|WORD)"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: match_ip_next_hop_prefix_list_cmd
	From cli: "match ip next-hop prefix-list WORD" to New cli: "match ip next-hop prefix-list WORD"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_ip_next_hop_prefix_list_cmd
	From cli: "no match ip next-hop prefix-list" to New cli: "no match ip next-hop prefix-list"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_ip_next_hop_prefix_list_val_cmd
	From cli: "no match ip next-hop prefix-list WORD" to New cli: "no match ip next-hop prefix-list WORD"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: match_ip_address_cmd
	From cli: "match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "match ip address (<1-199>|<1300-2699>|WORD)"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_ip_address_cmd
	From cli: "no match ip address" to New cli: "no match ip address"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_ip_address_val_cmd
	From cli: "no match ip address (<1-199>|<1300-2699>|WORD)" to New cli: "no match ip address (<1-199>|<1300-2699>|WORD)"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: match_ip_address_prefix_list_cmd
	From cli: "match ip address prefix-list WORD" to New cli: "match ip address prefix-list WORD"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_ip_address_prefix_list_cmd
	From cli: "no match ip address prefix-list" to New cli: "no match ip address prefix-list"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
Duplicate CLI Function: no_match_ip_address_prefix_list_val_cmd
	From cli: "no match ip address prefix-list WORD" to New cli: "no match ip address prefix-list WORD"
	Original Protocol: VTYSH_RIPD to New Protocol: VTYSH_ZEBRA
make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/vtysh'
sed \
		-e 's/"vtysh\.h"/"tests.h"/' \
		-e 's/vtysh_init_cmd/test_init_cmd/' \
		-e 's/VTYSH_[A-Z][A-Z_0-9]*/0/g' \
		< ../vtysh/vtysh_cmd.c \
		> test-commands-defun.c
/usr/bin/make  all-am
make[4]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/tests'
make[4]: Nothing to be done for `all-am'.
make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/tests'
make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/tests'
make[3]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3'
make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3'
make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3'
make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3'
>>> quagga 1.2.3 Installing to target
PATH="/home/buildroot/autobuild/run/instance-2/output/host/bin:/home/buildroot/autobuild/run/instance-2/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games"  /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/run/instance-2/output/target install -C /home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/
make[1]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3'
Making install in lib
make[2]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/lib'
true
/usr/bin/make  install-am
make[3]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/lib'
make[4]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/lib'
 /bin/mkdir -p '/home/buildroot/autobuild/run/instance-2/output/target/usr/lib'
 /bin/sh ../libtool   --mode=install /usr/bin/install -c   libzebra.la '/home/buildroot/autobuild/run/instance-2/output/target/usr/lib'
 /bin/mkdir -p '/home/buildroot/autobuild/run/instance-2/output/target/usr/include/quagga'
 /usr/bin/install -c -m 644 buffer.h checksum.h command.h filter.h getopt.h hash.h if.h linklist.h log.h memory.h network.h prefix.h routemap.h distribute.h sockunion.h str.h stream.h table.h thread.h vector.h version.h vty.h zebra.h plist.h zclient.h sockopt.h smux.h md5.h if_rmap.h keychain.h privs.h sigevent.h pqueue.h jhash.h zassert.h memtypes.h workqueue.h route_types.h libospf.h vrf.h '/home/buildroot/autobuild/run/instance-2/output/target/usr/include/quagga'
 /usr/bin/install -c -m 644 fifo.h event_counter.h nexthop.h '/home/buildroot/autobuild/run/instance-2/output/target/usr/include/quagga'
libtool: install: /usr/bin/install -c .libs/libzebra.so.1.0.0 /home/buildroot/autobuild/run/instance-2/output/target/usr/lib/libzebra.so.1.0.0
libtool: install: (cd /home/buildroot/autobuild/run/instance-2/output/target/usr/lib && { ln -s -f libzebra.so.1.0.0 libzebra.so.1 || { rm -f libzebra.so.1 && ln -s libzebra.so.1.0.0 libzebra.so.1; }; })
libtool: install: (cd /home/buildroot/autobuild/run/instance-2/output/target/usr/lib && { ln -s -f libzebra.so.1.0.0 libzebra.so || { rm -f libzebra.so && ln -s libzebra.so.1.0.0 libzebra.so; }; })
libtool: install: /usr/bin/install -c .libs/libzebra.lai /home/buildroot/autobuild/run/instance-2/output/target/usr/lib/libzebra.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/lib'
make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/lib'
make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/lib'
Making install in qpb
make[2]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/qpb'
/usr/bin/make  install-am
make[3]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/qpb'
make[4]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/qpb'
 /bin/mkdir -p '/home/buildroot/autobuild/run/instance-2/output/target/usr/lib'
make[4]: Nothing to be done for `install-data-am'.
 /bin/sh ../libtool   --mode=install /usr/bin/install -c   libquagga_pb.la '/home/buildroot/autobuild/run/instance-2/output/target/usr/lib'
libtool: install: /usr/bin/install -c .libs/libquagga_pb.so.0.0.0 /home/buildroot/autobuild/run/instance-2/output/target/usr/lib/libquagga_pb.so.0.0.0
libtool: install: (cd /home/buildroot/autobuild/run/instance-2/output/target/usr/lib && { ln -s -f libquagga_pb.so.0.0.0 libquagga_pb.so.0 || { rm -f libquagga_pb.so.0 && ln -s libquagga_pb.so.0.0.0 libquagga_pb.so.0; }; })
libtool: install: (cd /home/buildroot/autobuild/run/instance-2/output/target/usr/lib && { ln -s -f libquagga_pb.so.0.0.0 libquagga_pb.so || { rm -f libquagga_pb.so && ln -s libquagga_pb.so.0.0.0 libquagga_pb.so; }; })
libtool: install: /usr/bin/install -c .libs/libquagga_pb.lai /home/buildroot/autobuild/run/instance-2/output/target/usr/lib/libquagga_pb.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/qpb'
make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/qpb'
make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/qpb'
Making install in fpm
make[2]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/fpm'
/usr/bin/make  install-am
make[3]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/fpm'
make[4]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/fpm'
make[4]: Nothing to be done for `install-data-am'.
 /bin/mkdir -p '/home/buildroot/autobuild/run/instance-2/output/target/usr/lib'
 /bin/sh ../libtool   --mode=install /usr/bin/install -c   libfpm_pb.la '/home/buildroot/autobuild/run/instance-2/output/target/usr/lib'
libtool: install: /usr/bin/install -c .libs/libfpm_pb.so.0.0.0 /home/buildroot/autobuild/run/instance-2/output/target/usr/lib/libfpm_pb.so.0.0.0
libtool: install: (cd /home/buildroot/autobuild/run/instance-2/output/target/usr/lib && { ln -s -f libfpm_pb.so.0.0.0 libfpm_pb.so.0 || { rm -f libfpm_pb.so.0 && ln -s libfpm_pb.so.0.0.0 libfpm_pb.so.0; }; })
libtool: install: (cd /home/buildroot/autobuild/run/instance-2/output/target/usr/lib && { ln -s -f libfpm_pb.so.0.0.0 libfpm_pb.so || { rm -f libfpm_pb.so && ln -s libfpm_pb.so.0.0.0 libfpm_pb.so; }; })
libtool: install: /usr/bin/install -c .libs/libfpm_pb.lai /home/buildroot/autobuild/run/instance-2/output/target/usr/lib/libfpm_pb.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/fpm'
make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/fpm'
make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/fpm'
Making install in m4
make[2]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/m4'
make[3]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/m4'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/m4'
make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/m4'
Making install in redhat
make[2]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/redhat'
make[3]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/redhat'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/redhat'
make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/redhat'
Making install in tests
make[2]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/tests'
/usr/bin/make  install-am
make[3]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/tests'
make[4]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/tests'
make[4]: Nothing to be done for `install-exec-am'.
make[4]: Nothing to be done for `install-data-am'.
make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/tests'
make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/tests'
make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3/tests'
make[2]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3'
make[3]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3'
make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3'
make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/quagga-1.2.3'
ux500-firmware_1.1.3-6linaro1.tar.gz: OK (sha256: 81633274a9157c076e5e09b5addd81fbcef504b829fc801041cea50eea774bcd)
>>> ux500-firmware 1.1.3-6 Extracting
gzip -d -c /home/buildroot/autobuild/run/instance-2/dl/ux500-firmware/ux500-firmware_1.1.3-6linaro1.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-2/output/build/ux500-firmware-1.1.3-6   -xf -
>>> ux500-firmware 1.1.3-6 Patching
>>> ux500-firmware 1.1.3-6 Configuring
>>> ux500-firmware 1.1.3-6 Building
>>> ux500-firmware 1.1.3-6 Installing to target
PATH="/home/buildroot/autobuild/run/instance-2/output/host/bin:/home/buildroot/autobuild/run/instance-2/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 -C /home/buildroot/autobuild/run/instance-2/output/build/ux500-firmware-1.1.3-6 DESTDIR=/home/buildroot/autobuild/run/instance-2/output/target install
make[1]: Entering directory `/home/buildroot/autobuild/run/instance-2/output/build/ux500-firmware-1.1.3-6'
install -d /home/buildroot/autobuild/run/instance-2/output/target/lib/firmware/cw1200
install -m 0666 *.bin *.fw /home/buildroot/autobuild/run/instance-2/output/target/lib/firmware
install -m 0666 cw1200/*.bin /home/buildroot/autobuild/run/instance-2/output/target/lib/firmware/cw1200
make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output/build/ux500-firmware-1.1.3-6'
for f in /home/buildroot/autobuild/run/instance-2/output/target/lib/firmware/CG2900* ; do mv $f ${f/CG2900/CG29XX}; done
>>>   Finalizing target directory
# Check files that are touched by more than one package
./support/scripts/check-uniq-files -t target /home/buildroot/autobuild/run/instance-2/output/build/packages-file-list.txt
./support/scripts/check-uniq-files -t staging /home/buildroot/autobuild/run/instance-2/output/build/packages-file-list-staging.txt
./support/scripts/check-uniq-files -t host /home/buildroot/autobuild/run/instance-2/output/build/packages-file-list-host.txt
/bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L  console 0 vt100 #~' /home/buildroot/autobuild/run/instance-2/output/target/etc/inittab
/bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/autobuild/run/instance-2/output/target/etc/inittab
if grep -q CONFIG_ASH=y ./.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/run/instance-2/output/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/run/instance-2/output/target/etc/shells; fi
grep: ./.config: No such file or directory
if grep -q CONFIG_HUSH=y ./.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/run/instance-2/output/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/run/instance-2/output/target/etc/shells; fi
grep: ./.config: No such file or directory
mkdir -p /home/buildroot/autobuild/run/instance-2/output/host/etc/meson
sed -e "s%@TARGET_CROSS@%/home/buildroot/autobuild/run/instance-2/output/host/bin/nds32le-linux-%g" -e "s%@TARGET_ARCH@%nds32le%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%"little"%g" -e "s%@TARGET_CFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  `@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  `@PKG_TARGET_CFLAGS@%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/run/instance-2/output/host%g" package/meson//cross-compilation.conf.in > /home/buildroot/autobuild/run/instance-2/output/host/etc/meson/cross-compilation.conf.in
sed -e "s%@PKG_TARGET_CFLAGS@%%g" -e "s%@PKG_TARGET_LDFLAGS@%%g" -e "s%@PKG_TARGET_CXXFLAGS@%%g" /home/buildroot/autobuild/run/instance-2/output/host/etc/meson/cross-compilation.conf.in > /home/buildroot/autobuild/run/instance-2/output/host/etc/meson/cross-compilation.conf
mkdir -p /home/buildroot/autobuild/run/instance-2/output/target/etc
echo "buildroot" > /home/buildroot/autobuild/run/instance-2/output/target/etc/hostname
/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/run/instance-2/output/target/etc/hosts
mkdir -p /home/buildroot/autobuild/run/instance-2/output/target/etc
echo "Welcome to Buildroot" > /home/buildroot/autobuild/run/instance-2/output/target/etc/issue
/bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/run/instance-2/output/target/etc/shadow
rm -f /home/buildroot/autobuild/run/instance-2/output/target/bin/sh
rm -f /home/buildroot/autobuild/run/instance-2/output/build/locales.nopurge
for i in C en_US locale-archive; do echo $i >> /home/buildroot/autobuild/run/instance-2/output/build/locales.nopurge; done
for dir in ; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/run/instance-2/output/build/locales.nopurge || rm -rf $langdir; fi done; done
if [ -d /home/buildroot/autobuild/run/instance-2/output/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/run/instance-2/output/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/run/instance-2/output/target/usr/share/X11/locale/locale.dir; fi
rm -rf /home/buildroot/autobuild/run/instance-2/output/target/usr/include /home/buildroot/autobuild/run/instance-2/output/target/usr/share/aclocal \
		/home/buildroot/autobuild/run/instance-2/output/target/usr/lib/pkgconfig /home/buildroot/autobuild/run/instance-2/output/target/usr/share/pkgconfig \
		/home/buildroot/autobuild/run/instance-2/output/target/usr/lib/cmake /home/buildroot/autobuild/run/instance-2/output/target/usr/share/cmake
find /home/buildroot/autobuild/run/instance-2/output/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
find /home/buildroot/autobuild/run/instance-2/output/target/lib/ /home/buildroot/autobuild/run/instance-2/output/target/usr/lib/ /home/buildroot/autobuild/run/instance-2/output/target/usr/libexec/ \
		\( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
find: `/home/buildroot/autobuild/run/instance-2/output/target/usr/libexec/': No such file or directory
rm -rf /home/buildroot/autobuild/run/instance-2/output/target/usr/share/gdb
rm -rf /home/buildroot/autobuild/run/instance-2/output/target/usr/share/bash-completion
rm -rf /home/buildroot/autobuild/run/instance-2/output/target/usr/share/zsh
rm -rf /home/buildroot/autobuild/run/instance-2/output/target/usr/man /home/buildroot/autobuild/run/instance-2/output/target/usr/share/man
rm -rf /home/buildroot/autobuild/run/instance-2/output/target/usr/info /home/buildroot/autobuild/run/instance-2/output/target/usr/share/info
rm -rf /home/buildroot/autobuild/run/instance-2/output/target/usr/doc /home/buildroot/autobuild/run/instance-2/output/target/usr/share/doc
rm -rf /home/buildroot/autobuild/run/instance-2/output/target/usr/share/gtk-doc
rmdir /home/buildroot/autobuild/run/instance-2/output/target/usr/share 2>/dev/null || true
find /home/buildroot/autobuild/run/instance-2/output/target   -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/run/instance-2/output/host/bin/nds32le-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true
find /home/buildroot/autobuild/run/instance-2/output/target   \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/run/instance-2/output/host/bin/nds32le-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true
test -f /home/buildroot/autobuild/run/instance-2/output/target/etc/ld.so.conf && \
		{ echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
test -d /home/buildroot/autobuild/run/instance-2/output/target/etc/ld.so.conf.d && \
		{ echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true
mkdir -p /home/buildroot/autobuild/run/instance-2/output/target/etc
( \
		echo "NAME=Buildroot"; \
		echo "VERSION=2019.08-git-00509-g89d297a"; \
		echo "ID=buildroot"; \
		echo "VERSION_ID=2019.08-git"; \
		echo "PRETTY_NAME=\"Buildroot 2019.08-git\"" \
	) >  /home/buildroot/autobuild/run/instance-2/output/target/usr/lib/os-release
ln -sf ../usr/lib/os-release /home/buildroot/autobuild/run/instance-2/output/target/etc
>>>   Sanitizing RPATH in target tree
/home/buildroot/autobuild/run/instance-2/buildroot/support/scripts/fix-rpath target
touch /home/buildroot/autobuild/run/instance-2/output/target/usr
make: Leaving directory `/home/buildroot/autobuild/run/instance-2/buildroot'
make: Entering directory `/home/buildroot/autobuild/run/instance-2/buildroot'
>>>   Buildroot 2019.08-git-00509-g89d297a Collecting legal info
COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4)
>>> toolchain-external  Collecting legal info
>>> host-skeleton  Collecting legal info
>>> skeleton  Collecting legal info
>>> skeleton-init-sysv  Collecting legal info
>>> skeleton-init-common  Collecting legal info
>>> toolchain-external-andes-nds32  Collecting legal info
>>> toolchain  Collecting legal info
>>> busybox 1.31.0 Collecting legal info
LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548)
>>> dtc 1.4.7 Collecting legal info
ERROR: No hash found for README.license
ERROR: No hash found for GPL
>>> host-bison 3.0.4 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-m4 1.4.18 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-flex 2.6.4 Collecting legal info
COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273)
>>> host-autoconf 2.69 Collecting legal info
COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2)
>>> host-libtool 2.4.6 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-automake 1.15.1 Collecting legal info
COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6)
>>> host-gettext  Collecting legal info
>>> host-gettext-tiny c6dcdcdef801127549d3906d153c061880d25a73 Collecting legal info
LICENSE: OK (sha256: b57aa4fdc1c614c28d41c1e2d5c4090935964c5f86291ba7d1c99ffd1d698b34)
extra/COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> initscripts  Collecting legal info
>>> host-patchelf 0.9 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> quagga 1.2.3 Collecting legal info
COPYING: OK (sha256: b39c1bad4e51e2a3389cd25fc4addebe41a3ae7c11100795683f9330de1536e5)
>>> host-gawk 4.2.1 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-pkgconf 1.6.1 Collecting legal info
COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04)
>>> ux500-firmware 1.1.3-6 Collecting legal info
ERROR: No hash found for license.txt
WARNING: the Buildroot source code has not been saved
WARNING: toolchain-external-andes-nds32: cannot save license (TOOLCHAIN_EXTERNAL_ANDES_NDS32_LICENSE_FILES not defined)
Legal info produced in /home/buildroot/autobuild/run/instance-2/output/legal-info
make: Leaving directory `/home/buildroot/autobuild/run/instance-2/buildroot'