--source='GNU Autoconf 2.69' \ --output=config.sub.1.t `echo 'config.sub' | sed 's,.*/,,'` /home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/build-aux/missing: line 51: help2man: command not found /home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/build-aux/missing: line 51: help2man: command not found WARNING: 'help2man' is missing on your system. You should only need it if you modified a dependency of a manual page. You may need the Help2man package in order for those modifications to take effect. You can get Help2man from any GNU archive site. WARNING: 'help2man' is missing on your system. You should only need it if you modified a dependency of a manual page. You may need the Help2man package in order for those modifications to take effect. You can get Help2man from any GNU archive site. if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.guess.1 >config.guess.1a.t 2>/dev/null && \ sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.guess.1.t | cmp config.guess.1a.t - >/dev/null 2>&1; then \ touch config.guess.1; \ else \ mv config.guess.1.t config.guess.1; \ fi if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.sub.1 >config.sub.1a.t 2>/dev/null && \ sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.sub.1.t | cmp config.sub.1a.t - >/dev/null 2>&1; then \ touch config.sub.1; \ else \ mv config.sub.1.t config.sub.1; \ fi rm -f config.guess.1*.t rm -f config.sub.1*.t make[3]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/man' make[2]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69' make[1]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69' >>> host-autoconf 2.69 Installing to host directory PATH="/home/peko/autobuild/instance-2/output/host/bin:/home/peko/autobuild/instance-2/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" PKG_CONFIG="/home/peko/autobuild/instance-2/output/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/peko/autobuild/instance-2/output/host/lib/pkgconfig:/home/peko/autobuild/instance-2/output/host/share/pkgconfig" /usr/bin/make -j6 install -C /home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/ make[1]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69' /usr/bin/make install-recursive make[2]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69' Making install in bin make[3]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/bin' make[4]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/bin' make[4]: Nothing to be done for `install-data-am'. test -z "/home/peko/autobuild/instance-2/output/host/bin" || /bin/mkdir -p "/home/peko/autobuild/instance-2/output/host/bin" /usr/bin/install -c autom4te autoconf autoheader autoreconf ifnames autoscan autoupdate '/home/peko/autobuild/instance-2/output/host/bin' make[4]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/bin' make[3]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/bin' Making install in . make[3]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69' make[4]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69' make[4]: Nothing to be done for `install-exec-am'. test -z "/home/peko/autobuild/instance-2/output/host/share/autoconf" || /bin/mkdir -p "/home/peko/autobuild/instance-2/output/host/share/autoconf" /usr/bin/install -c -m 644 ./INSTALL '/home/peko/autobuild/instance-2/output/host/share/autoconf' make[4]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69' make[3]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69' Making install in lib make[3]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib' Making install in Autom4te make[4]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/Autom4te' make[5]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/Autom4te' make[5]: Nothing to be done for `install-exec-am'. test -z "/home/peko/autobuild/instance-2/output/host/share/autoconf/Autom4te" || /bin/mkdir -p "/home/peko/autobuild/instance-2/output/host/share/autoconf/Autom4te" /usr/bin/install -c -m 644 C4che.pm ChannelDefs.pm Channels.pm Configure_ac.pm FileUtils.pm General.pm Getopt.pm Request.pm XFile.pm '/home/peko/autobuild/instance-2/output/host/share/autoconf/Autom4te' make[5]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/Autom4te' make[4]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/Autom4te' Making install in m4sugar make[4]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/m4sugar' make[5]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/m4sugar' make[5]: Nothing to be done for `install-exec-am'. test -z "/home/peko/autobuild/instance-2/output/host/share/autoconf/m4sugar" || /bin/mkdir -p "/home/peko/autobuild/instance-2/output/host/share/autoconf/m4sugar" test -z "/home/peko/autobuild/instance-2/output/host/share/autoconf/m4sugar" || /bin/mkdir -p "/home/peko/autobuild/instance-2/output/host/share/autoconf/m4sugar" /usr/bin/install -c -m 644 m4sugar.m4 foreach.m4 m4sh.m4 '/home/peko/autobuild/instance-2/output/host/share/autoconf/m4sugar' /usr/bin/install -c -m 644 version.m4 m4sugar.m4f m4sh.m4f '/home/peko/autobuild/instance-2/output/host/share/autoconf/m4sugar' make[5]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/m4sugar' make[4]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/m4sugar' Making install in autoconf make[4]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/autoconf' make[5]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/autoconf' make[5]: Nothing to be done for `install-exec-am'. test -z "/home/peko/autobuild/instance-2/output/host/share/autoconf/autoconf" || /bin/mkdir -p "/home/peko/autobuild/instance-2/output/host/share/autoconf/autoconf" test -z "/home/peko/autobuild/instance-2/output/host/share/autoconf/autoconf" || /bin/mkdir -p "/home/peko/autobuild/instance-2/output/host/share/autoconf/autoconf" /usr/bin/install -c -m 644 autoconf.m4 general.m4 status.m4 oldnames.m4 specific.m4 autoheader.m4 autoupdate.m4 autotest.m4 autoscan.m4 lang.m4 c.m4 erlang.m4 fortran.m4 functions.m4 go.m4 headers.m4 types.m4 libs.m4 programs.m4 '/home/peko/autobuild/instance-2/output/host/share/autoconf/autoconf' /usr/bin/install -c -m 644 autoconf.m4f '/home/peko/autobuild/instance-2/output/host/share/autoconf/autoconf' make[5]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/autoconf' make[4]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/autoconf' Making install in autotest make[4]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/autotest' make[5]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/autotest' make[5]: Nothing to be done for `install-exec-am'. test -z "/home/peko/autobuild/instance-2/output/host/share/autoconf/autotest" || /bin/mkdir -p "/home/peko/autobuild/instance-2/output/host/share/autoconf/autotest" test -z "/home/peko/autobuild/instance-2/output/host/share/autoconf/autotest" || /bin/mkdir -p "/home/peko/autobuild/instance-2/output/host/share/autoconf/autotest" /usr/bin/install -c -m 644 autotest.m4 general.m4 specific.m4 '/home/peko/autobuild/instance-2/output/host/share/autoconf/autotest' /usr/bin/install -c -m 644 autotest.m4f '/home/peko/autobuild/instance-2/output/host/share/autoconf/autotest' make[5]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/autotest' make[4]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/autotest' Making install in autoscan make[4]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/autoscan' make[5]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/autoscan' make[5]: Nothing to be done for `install-exec-am'. test -z "/home/peko/autobuild/instance-2/output/host/share/autoconf/autoscan" || /bin/mkdir -p "/home/peko/autobuild/instance-2/output/host/share/autoconf/autoscan" /usr/bin/install -c -m 644 autoscan.list '/home/peko/autobuild/instance-2/output/host/share/autoconf/autoscan' make[5]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/autoscan' make[4]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/autoscan' Making install in emacs make[4]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/emacs' make[5]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/emacs' make[5]: Nothing to be done for `install-exec-am'. make[5]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/emacs' make[4]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib/emacs' make[4]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib' make[5]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib' make[5]: Nothing to be done for `install-exec-am'. test -z "/home/peko/autobuild/instance-2/output/host/share/autoconf" || /bin/mkdir -p "/home/peko/autobuild/instance-2/output/host/share/autoconf" /usr/bin/install -c -m 644 autom4te.cfg '/home/peko/autobuild/instance-2/output/host/share/autoconf' make[5]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib' make[4]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib' make[3]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/lib' Making install in doc make[3]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/doc' make[4]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/doc' make[4]: Nothing to be done for `install-exec-am'. test -z "/home/peko/autobuild/instance-2/output/host/share/info" || /bin/mkdir -p "/home/peko/autobuild/instance-2/output/host/share/info" /usr/bin/install -c -m 644 ./autoconf.info ./standards.info '/home/peko/autobuild/instance-2/output/host/share/info' install-info --info-dir='/home/peko/autobuild/instance-2/output/host/share/info' '/home/peko/autobuild/instance-2/output/host/share/info/autoconf.info' This is not dpkg install-info anymore, but GNU install-info See the man page for ginstall-info for command line arguments install-info --info-dir='/home/peko/autobuild/instance-2/output/host/share/info' '/home/peko/autobuild/instance-2/output/host/share/info/standards.info' This is not dpkg install-info anymore, but GNU install-info See the man page for ginstall-info for command line arguments make[4]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/doc' make[3]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/doc' Making install in tests make[3]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/tests' make[4]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/tests' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/tests' make[3]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/tests' Making install in man make[3]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/man' make[4]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/man' make[4]: Nothing to be done for `install-exec-am'. test -z "/home/peko/autobuild/instance-2/output/host/share/man/man1" || /bin/mkdir -p "/home/peko/autobuild/instance-2/output/host/share/man/man1" /usr/bin/install -c -m 644 ./autoconf.1 ./autoheader.1 ./autom4te.1 ./autoreconf.1 ./autoscan.1 ./autoupdate.1 ./ifnames.1 ./config.guess.1 ./config.sub.1 '/home/peko/autobuild/instance-2/output/host/share/man/man1' make[4]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/man' make[3]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69/man' make[2]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69' make[1]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-autoconf-2.69' automake-1.15.1.tar.xz: OK (sha256: af6ba39142220687c500f79b4aa2f181d9b24e4f8d8ec497cea4ba26c64bedaf) >>> host-automake 1.15.1 Extracting xzcat /home/peko/autobuild/instance-2/dl/automake-1.15.1.tar.xz | tar --strip-components=1 -C /home/peko/autobuild/instance-2/output/build/host-automake-1.15.1 -xf - >>> host-automake 1.15.1 Patching Applying 0001-noman.patch using patch: patching file Makefile.in Hunk #1 succeeded at 3367 (offset -20 lines). Hunk #2 succeeded at 3434 (offset -20 lines). >>> host-automake 1.15.1 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/peko/autobuild/instance-2/output/build/host-automake-1.15.1 -name $file); do cp support/gnuconfig/$file $i; done; done >>> host-automake 1.15.1 Patching libtool >>> host-automake 1.15.1 Configuring (cd /home/peko/autobuild/instance-2/output/build/host-automake-1.15.1/ && rm -rf config.cache; PATH="/home/peko/autobuild/instance-2/output/host/bin:/home/peko/autobuild/instance-2/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" PKG_CONFIG="/home/peko/autobuild/instance-2/output/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/peko/autobuild/instance-2/output/host/lib/pkgconfig:/home/peko/autobuild/instance-2/output/host/share/pkgconfig" AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld" NM="/usr/bin/nm" CC="/usr/bin/gcc" GCC="/usr/bin/gcc" CXX="/usr/bin/g++" CPP="/usr/bin/cpp" OBJCOPY="/usr/bin/objcopy" RANLIB="/usr/bin/ranlib" CPPFLAGS="-I/home/peko/autobuild/instance-2/output/host/include" CFLAGS="-O2 -I/home/peko/autobuild/instance-2/output/host/include" CXXFLAGS="-O2 -I/home/peko/autobuild/instance-2/output/host/include" LDFLAGS="-L/home/peko/autobuild/instance-2/output/host/lib -Wl,-rpath,/home/peko/autobuild/instance-2/output/host/lib" INTLTOOL_PERL=/usr/bin/perl CFLAGS="-O2 -I/home/peko/autobuild/instance-2/output/host/include" LDFLAGS="-L/home/peko/autobuild/instance-2/output/host/lib -Wl,-rpath,/home/peko/autobuild/instance-2/output/host/lib" CONFIG_SITE=/dev/null ./configure --prefix="/home/peko/autobuild/instance-2/output/host" --sysconfdir="/home/peko/autobuild/instance-2/output/host/etc" --localstatedir="/home/peko/autobuild/instance-2/output/host/var" --enable-shared --disable-static --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --disable-debug --with-xmlto=no --with-fop=no --disable-dependency-tracking ) configure: WARNING: unrecognized options: --enable-shared, --disable-static, --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --disable-debug, --with-xmlto, --with-fop, --disable-dependency-tracking checking whether make supports nested variables... yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether ln -s works... yes checking for perl... /usr/bin/perl checking for tex... no checking for yacc... yacc checking for lex... lex checking whether autoconf is installed... yes checking whether autoconf works... yes checking whether autoconf is recent enough... yes checking whether ln works... yes checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F configure: will now look for a sturdy POSIX shell, for our testsuite checking for sh... /bin/sh checking for sh5... no checking for dash... /bin/dash checking for ash... no checking for bash... /bin/bash checking for zsh... /usr/bin/zsh checking for ksh... /usr/bin/ksh checking for pdksh... no checking whether /bin/bash supports $(cmd)... yes checking whether /bin/bash supports $((expr))... yes checking whether /bin/bash supports ${#var}... yes checking whether /bin/bash supports ${var#glob} and ${var%glob}... yes checking whether /bin/bash preserves exit traps with "set -e"... yes checking whether /bin/bash can define exit traps in a shell function... yes checking whether /bin/bash corrupts stderr with "set -x"... no checking whether /bin/bash can return early from "dot-sourced" files... yes checking whether /bin/bash supports alias named like shell builtins... yes checking whether /bin/bash supports "test -e"... yes configure: shell /bin/bash is good enough, stop looking configure: will use /bin/bash as the testsuite shell configure: will now look for generic compilers checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /usr/bin/gcc accepts -g... yes checking for /usr/bin/gcc option to accept ISO C89... none needed checking whether /usr/bin/gcc understands -c and -o together... yes checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether /usr/bin/g++ accepts -g... yes checking for xlf95... no checking for f95... f95 checking whether the Fortran compiler works... yes checking for Fortran compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU Fortran compiler... yes checking whether f95 accepts -g... yes checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for g77... no checking for gfortran... gfortran checking whether the Fortran 77 compiler works... yes checking for Fortran 77 compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU Fortran 77 compiler... yes checking whether gfortran accepts -g... yes configure: will now look for GNU compilers configure: /usr/bin/gcc is already a GNU C compiler configure: /usr/bin/g++ is already a GNU C++ compiler configure: f95 is already a GNU Fortran compiler configure: gfortran is already a GNU Fortran 77 compiler checking for gcj... gcj checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating t/wrap/aclocal-1.15 config.status: creating t/wrap/automake-1.15 configure: WARNING: unrecognized options: --enable-shared, --disable-static, --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --disable-debug, --with-xmlto, --with-fop, --disable-dependency-tracking >>> host-automake 1.15.1 Building PATH="/home/peko/autobuild/instance-2/output/host/bin:/home/peko/autobuild/instance-2/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" PKG_CONFIG="/home/peko/autobuild/instance-2/output/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/peko/autobuild/instance-2/output/host/lib/pkgconfig:/home/peko/autobuild/instance-2/output/host/share/pkgconfig" /usr/bin/make -j6 -C /home/peko/autobuild/instance-2/output/build/host-automake-1.15.1/ make[1]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-automake-1.15.1' GEN bin/automake GEN bin/aclocal GEN t/ax/cc-no-c-o GEN t/ax/shell-no-trail-bslash GEN runtest GEN t/ax/test-defs.sh GEN lib/Automake/Config.pm make[1]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-automake-1.15.1' >>> host-automake 1.15.1 Installing to host directory PATH="/home/peko/autobuild/instance-2/output/host/bin:/home/peko/autobuild/instance-2/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" PKG_CONFIG="/home/peko/autobuild/instance-2/output/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/peko/autobuild/instance-2/output/host/lib/pkgconfig:/home/peko/autobuild/instance-2/output/host/share/pkgconfig" /usr/bin/make -j6 install -C /home/peko/autobuild/instance-2/output/build/host-automake-1.15.1/ make[1]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-automake-1.15.1' make[2]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-automake-1.15.1' /bin/mkdir -p '/home/peko/autobuild/instance-2/output/host/bin' /bin/mkdir -p '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/am' /bin/mkdir -p '/home/peko/autobuild/instance-2/output/host/share/aclocal-1.15' /bin/mkdir -p '/home/peko/autobuild/instance-2/output/host/share/aclocal-1.15/internal' /usr/bin/install -c bin/automake bin/aclocal '/home/peko/autobuild/instance-2/output/host/bin' /usr/bin/install -c -m 644 lib/am/check.am lib/am/check2.am lib/am/clean-hdr.am lib/am/clean.am lib/am/compile.am lib/am/configure.am lib/am/data.am lib/am/dejagnu.am lib/am/depend.am lib/am/depend2.am lib/am/distdir.am lib/am/footer.am lib/am/header-vars.am lib/am/header.am lib/am/install.am lib/am/inst-vars.am lib/am/java.am lib/am/lang-compile.am lib/am/lex.am lib/am/library.am lib/am/libs.am lib/am/libtool.am lib/am/lisp.am lib/am/ltlib.am lib/am/ltlibrary.am lib/am/mans-vars.am lib/am/mans.am lib/am/program.am lib/am/progs.am lib/am/python.am lib/am/remake-hdr.am lib/am/scripts.am lib/am/subdirs.am lib/am/tags.am lib/am/texi-vers.am lib/am/texibuild.am lib/am/texinfos.am lib/am/vala.am lib/am/yacc.am '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/am' /usr/bin/install -c -m 644 m4/internal/ac-config-macro-dirs.m4 '/home/peko/autobuild/instance-2/output/host/share/aclocal-1.15/internal' /usr/bin/install -c -m 644 m4/amversion.m4 m4/ar-lib.m4 m4/as.m4 m4/auxdir.m4 m4/cond.m4 m4/cond-if.m4 m4/depend.m4 m4/depout.m4 m4/dmalloc.m4 m4/extra-recurs.m4 m4/gcj.m4 m4/init.m4 m4/install-sh.m4 m4/lead-dot.m4 m4/lex.m4 m4/lispdir.m4 m4/maintainer.m4 m4/make.m4 m4/missing.m4 m4/mkdirp.m4 m4/obsolete.m4 m4/options.m4 m4/python.m4 m4/prog-cc-c-o.m4 m4/runlog.m4 m4/sanity.m4 m4/silent.m4 m4/strip.m4 m4/substnot.m4 m4/tar.m4 m4/upc.m4 m4/vala.m4 '/home/peko/autobuild/instance-2/output/host/share/aclocal-1.15' /bin/mkdir -p '/home/peko/autobuild/instance-2/output/host/share/doc/automake' /bin/mkdir -p '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/Automake' /bin/mkdir -p '/home/peko/autobuild/instance-2/output/host/share/automake-1.15' /usr/bin/install -c -m 644 ./doc/amhello-1.0.tar.gz '/home/peko/autobuild/instance-2/output/host/share/doc/automake' /bin/mkdir -p '/home/peko/autobuild/instance-2/output/host/share/automake-1.15' /usr/bin/install -c -m 644 lib/Automake/ChannelDefs.pm lib/Automake/Channels.pm lib/Automake/Condition.pm lib/Automake/Configure_ac.pm lib/Automake/DisjConditions.pm lib/Automake/FileUtils.pm lib/Automake/General.pm lib/Automake/Getopt.pm lib/Automake/Item.pm lib/Automake/ItemDef.pm lib/Automake/Language.pm lib/Automake/Location.pm lib/Automake/Options.pm lib/Automake/Rule.pm lib/Automake/RuleDef.pm lib/Automake/Variable.pm lib/Automake/VarDef.pm lib/Automake/Version.pm lib/Automake/XFile.pm lib/Automake/Wrap.pm '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/Automake' /bin/mkdir -p '/home/peko/autobuild/instance-2/output/host/share/aclocal' /usr/bin/install -c -m 644 lib/COPYING lib/INSTALL lib/texinfo.tex '/home/peko/autobuild/instance-2/output/host/share/automake-1.15' /usr/bin/install -c -m 644 lib/config.guess lib/config.sub lib/install-sh lib/mdate-sh lib/missing lib/mkinstalldirs lib/ylwrap lib/depcomp lib/compile lib/py-compile lib/ar-lib lib/test-driver lib/tap-driver.sh '/home/peko/autobuild/instance-2/output/host/share/automake-1.15' /bin/mkdir -p '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/Automake' /usr/bin/install -c -m 644 m4/acdir/README '/home/peko/autobuild/instance-2/output/host/share/aclocal' /bin/mkdir -p '/home/peko/autobuild/instance-2/output/host/share/info' /usr/bin/make install-exec-hook /usr/bin/install -c -m 644 lib/Automake/Config.pm '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/Automake' /usr/bin/install -c -m 644 ./doc/automake.info ./doc/automake.info-1 ./doc/automake.info-2 ./doc/automake-history.info '/home/peko/autobuild/instance-2/output/host/share/info' install-info --info-dir='/home/peko/autobuild/instance-2/output/host/share/info' '/home/peko/autobuild/instance-2/output/host/share/info/automake.info' This is not dpkg install-info anymore, but GNU install-info See the man page for ginstall-info for command line arguments install-info --info-dir='/home/peko/autobuild/instance-2/output/host/share/info' '/home/peko/autobuild/instance-2/output/host/share/info/automake-history.info' This is not dpkg install-info anymore, but GNU install-info See the man page for ginstall-info for command line arguments install-info: warning: no info dir entry in `/home/peko/autobuild/instance-2/output/host/share/info/automake-history.info' /usr/bin/make install-data-hook make[3]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-automake-1.15.1' ln '/home/peko/autobuild/instance-2/output/host/bin/automake' '/home/peko/autobuild/instance-2/output/host/bin/automake-1.15' ln '/home/peko/autobuild/instance-2/output/host/bin/aclocal' '/home/peko/autobuild/instance-2/output/host/bin/aclocal-1.15' make[3]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-automake-1.15.1' make[3]: Entering directory `/home/peko/autobuild/instance-2/output/build/host-automake-1.15.1' chmod +x '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/config.guess' chmod +x '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/config.sub' chmod +x '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/install-sh' chmod +x '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/mdate-sh' chmod +x '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/missing' chmod +x '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/mkinstalldirs' chmod +x '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/ylwrap' chmod +x '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/depcomp' chmod +x '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/compile' chmod +x '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/py-compile' chmod +x '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/ar-lib' chmod +x '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/test-driver' chmod +x '/home/peko/autobuild/instance-2/output/host/share/automake-1.15/tap-driver.sh' make[3]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-automake-1.15.1' make[2]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-automake-1.15.1' make[1]: Leaving directory `/home/peko/autobuild/instance-2/output/build/host-automake-1.15.1' /usr/bin/install -D -m 0644 package/automake/gtk-doc.m4 /home/peko/autobuild/instance-2/output/host/share/aclocal/gtk-doc.m4 mkdir -p /home/peko/autobuild/instance-2/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/share/aclocal psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca.tar.gz: OK (sha256: aaddb20ef892dfb03d4e046cc634159bbcdfe555f7291652dde2b7d4cf491289) >>> psplash 5b3c1cc28f5abdc2c33830150b48b278cc4f7bca Extracting gzip -d -c /home/peko/autobuild/instance-2/dl/psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca.tar.gz | tar --strip-components=1 -C /home/peko/autobuild/instance-2/output/build/psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca -xf - >>> psplash 5b3c1cc28f5abdc2c33830150b48b278cc4f7bca Patching >>> psplash 5b3c1cc28f5abdc2c33830150b48b278cc4f7bca Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/peko/autobuild/instance-2/output/build/psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca -name $file); do cp support/gnuconfig/$file $i; done; done >>> psplash 5b3c1cc28f5abdc2c33830150b48b278cc4f7bca Configuring >>> psplash 5b3c1cc28f5abdc2c33830150b48b278cc4f7bca Autoreconfiguring configure.ac:7: installing './compile' configure.ac:3: installing './install-sh' configure.ac:3: installing './missing' Makefile.am: installing './INSTALL' Makefile.am: installing './depcomp' >>> psplash 5b3c1cc28f5abdc2c33830150b48b278cc4f7bca Patching libtool (cd /home/peko/autobuild/instance-2/output/build/psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca/ && rm -rf config.cache && PATH="/home/peko/autobuild/instance-2/output/host/bin:/home/peko/autobuild/instance-2/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" AR="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-ar" AS="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-as" LD="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-ld" NM="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-nm" CC="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc" GCC="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc" CPP="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-cpp" CXX="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-g++" FC="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-gfortran" F77="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-gfortran" RANLIB="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-ranlib" READELF="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-readelf" STRIP="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-strip" OBJCOPY="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-objcopy" OBJDUMP="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/peko/autobuild/instance-2/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-2/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-2/output/host/include" LDFLAGS_FOR_BUILD="-L/home/peko/autobuild/instance-2/output/host/lib -Wl,-rpath,/home/peko/autobuild/instance-2/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-as" DEFAULT_LINKER="/home/peko/autobuild/instance-2/output/host/bin/arm-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wl,-elf2flt -static" CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wl,-elf2flt -static -Wl,-elf2flt -static" LDFLAGS=" -Wl,-elf2flt -static" FCFLAGS=" -Os -Wl,-elf2flt -static" FFLAGS=" -Os -Wl,-elf2flt -static" PKG_CONFIG="/home/peko/autobuild/instance-2/output/host/bin/pkg-config" STAGING_DIR="/home/peko/autobuild/instance-2/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CONFIG_SITE=/dev/null ./configure --target=arm-buildroot-uclinux-uclibcgnueabi --host=arm-buildroot-uclinux-uclibcgnueabi --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --enable-static --disable-shared ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --enable-static, --disable-shared checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-buildroot-uclinux-uclibcgnueabi-strip... /home/peko/autobuild/instance-2/output/host/bin/arm-linux-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for style of include used by make... GNU checking for arm-buildroot-uclinux-uclibcgnueabi-gcc... /home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc accepts -g... yes checking for /home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc option to accept ISO C89... none needed checking whether /home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc understands -c and -o together... yes checking dependency style of /home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc... none checking for library containing strerror... none required checking for arm-buildroot-uclinux-uclibcgnueabi-gcc... (cached) /home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc checking whether we are using the GNU C compiler... (cached) yes checking whether /home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc accepts -g... (cached) yes checking for /home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc option to accept ISO C89... (cached) none needed checking whether /home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc understands -c and -o together... (cached) yes checking dependency style of /home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc... (cached) none checking how to run the C preprocessor... /home/peko/autobuild/instance-2/output/host/bin/arm-linux-cpp checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --enable-static, --disable-shared >>> psplash 5b3c1cc28f5abdc2c33830150b48b278cc4f7bca Building PATH="/home/peko/autobuild/instance-2/output/host/bin:/home/peko/autobuild/instance-2/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j6 -C /home/peko/autobuild/instance-2/output/build/psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca/ make[1]: Entering directory `/home/peko/autobuild/instance-2/output/build/psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca' /usr/bin/make all-am make[2]: Entering directory `/home/peko/autobuild/instance-2/output/build/psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca' /home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc -DHAVE_CONFIG_H -I. -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g -Wall -Wextra -D_GNU_SOURCE -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wl,-elf2flt -static -c -o psplash.o psplash.c /home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc -DHAVE_CONFIG_H -I. -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g -Wall -Wextra -D_GNU_SOURCE -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wl,-elf2flt -static -c -o psplash-fb.o psplash-fb.c /home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc -DHAVE_CONFIG_H -I. -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g -Wall -Wextra -D_GNU_SOURCE -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wl,-elf2flt -static -c -o psplash-console.o psplash-console.c /home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc -DHAVE_CONFIG_H -I. -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g -Wall -Wextra -D_GNU_SOURCE -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wl,-elf2flt -static -c -o psplash-write.o psplash-write.c /home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc -g -Wall -Wextra -D_GNU_SOURCE -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wl,-elf2flt -static -Wl,-elf2flt -static -o psplash-write psplash-write.o /home/peko/autobuild/instance-2/output/host/bin/arm-linux-gcc -g -Wall -Wextra -D_GNU_SOURCE -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wl,-elf2flt -static -Wl,-elf2flt -static -o psplash psplash.o psplash-fb.o psplash-console.o make[2]: Leaving directory `/home/peko/autobuild/instance-2/output/build/psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca' make[1]: Leaving directory `/home/peko/autobuild/instance-2/output/build/psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca' >>> psplash 5b3c1cc28f5abdc2c33830150b48b278cc4f7bca Installing to target PATH="/home/peko/autobuild/instance-2/output/host/bin:/home/peko/autobuild/instance-2/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j6 DESTDIR=/home/peko/autobuild/instance-2/output/target install -C /home/peko/autobuild/instance-2/output/build/psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca/ make[1]: Entering directory `/home/peko/autobuild/instance-2/output/build/psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca' make[2]: Entering directory `/home/peko/autobuild/instance-2/output/build/psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca' make[2]: Nothing to be done for `install-data-am'. /bin/mkdir -p '/home/peko/autobuild/instance-2/output/target/usr/bin' /usr/bin/install -c psplash psplash-write '/home/peko/autobuild/instance-2/output/target/usr/bin' make[2]: Leaving directory `/home/peko/autobuild/instance-2/output/build/psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca' make[1]: Leaving directory `/home/peko/autobuild/instance-2/output/build/psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca' >>> Finalizing target directory # Check files that are touched by more than one package ./support/scripts/check-uniq-files -t target /home/peko/autobuild/instance-2/output/build/packages-file-list.txt ./support/scripts/check-uniq-files -t staging /home/peko/autobuild/instance-2/output/build/packages-file-list-staging.txt ./support/scripts/check-uniq-files -t host /home/peko/autobuild/instance-2/output/build/packages-file-list-host.txt Warning: host file "./share/info/dir" is touched by more than one package: ['host-lzip', 'host-m4', 'host-libtool', 'host-autoconf', 'host-automake'] /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/peko/autobuild/instance-2/output/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/peko/autobuild/instance-2/output/target/etc/inittab mkdir -p /home/peko/autobuild/instance-2/output/target/etc echo "buildroot" > /home/peko/autobuild/instance-2/output/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/peko/autobuild/instance-2/output/target/etc/hosts mkdir -p /home/peko/autobuild/instance-2/output/target/etc echo "Welcome to Buildroot" > /home/peko/autobuild/instance-2/output/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/peko/autobuild/instance-2/output/target/etc/shadow rm -f /home/peko/autobuild/instance-2/output/target/bin/sh rm -f /home/peko/autobuild/instance-2/output/build/locales.nopurge for i in C en_US locale-archive; do echo $i >> /home/peko/autobuild/instance-2/output/build/locales.nopurge; done for dir in ; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/peko/autobuild/instance-2/output/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/peko/autobuild/instance-2/output/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/peko/autobuild/instance-2/output/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/peko/autobuild/instance-2/output/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/peko/autobuild/instance-2/output/target/usr/include /home/peko/autobuild/instance-2/output/target/usr/share/aclocal \ /home/peko/autobuild/instance-2/output/target/usr/lib/pkgconfig /home/peko/autobuild/instance-2/output/target/usr/share/pkgconfig \ /home/peko/autobuild/instance-2/output/target/usr/lib/cmake /home/peko/autobuild/instance-2/output/target/usr/share/cmake find /home/peko/autobuild/instance-2/output/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/peko/autobuild/instance-2/output/target/lib/ /home/peko/autobuild/instance-2/output/target/usr/lib/ /home/peko/autobuild/instance-2/output/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f find: `/home/peko/autobuild/instance-2/output/target/usr/libexec/': No such file or directory rm -rf /home/peko/autobuild/instance-2/output/target/usr/share/gdb rm -rf /home/peko/autobuild/instance-2/output/target/usr/share/bash-completion rm -rf /home/peko/autobuild/instance-2/output/target/usr/share/zsh rm -rf /home/peko/autobuild/instance-2/output/target/usr/man /home/peko/autobuild/instance-2/output/target/usr/share/man rm -rf /home/peko/autobuild/instance-2/output/target/usr/info /home/peko/autobuild/instance-2/output/target/usr/share/info rm -rf /home/peko/autobuild/instance-2/output/target/usr/doc /home/peko/autobuild/instance-2/output/target/usr/share/doc rm -rf /home/peko/autobuild/instance-2/output/target/usr/share/gtk-doc rmdir /home/peko/autobuild/instance-2/output/target/usr/share 2>/dev/null || true find /home/peko/autobuild/instance-2/output/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/peko/autobuild/instance-2/output/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/peko/autobuild/instance-2/output/target/lib/ -type f -name 'libpthread*.so*' | \ xargs -r /home/peko/autobuild/instance-2/output/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note --strip-debug find /home/peko/autobuild/instance-2/output/target/lib/ -type f -name 'ld-*.so*' | \ xargs -r /home/peko/autobuild/instance-2/output/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note --strip-debug test -f /home/peko/autobuild/instance-2/output/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/peko/autobuild/instance-2/output/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/peko/autobuild/instance-2/output/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2018.02-git-00695-ge4c2c68"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2018.02-git"; \ echo "PRETTY_NAME=\"Buildroot 2018.02-git\"" \ ) > /home/peko/autobuild/instance-2/output/target/etc/os-release >>> Sanitizing RPATH in target tree /home/peko/autobuild/instance-2/buildroot/support/scripts/fix-rpath target make: Leaving directory `/home/peko/autobuild/instance-2/buildroot' make: Entering directory `/home/peko/autobuild/instance-2/buildroot' >>> Buildroot 2018.02-git-00695-ge4c2c68 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> host-lzip 1.19 Collecting legal info ERROR: No hash found for COPYING >>> toolchain-external Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-custom Collecting legal info >>> toolchain Collecting legal info >>> armbian-firmware 455d6b6701178dafe7fd0168eb4a4ef78a8d24a3 Collecting legal info >>> busybox 1.27.2 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) >>> dropbear 2017.75 Collecting legal info ERROR: No hash found for LICENSE >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> initscripts Collecting legal info >>> libgpg-error 1.27 Collecting legal info ERROR: No hash found for COPYING ERROR: No hash found for COPYING.LIB >>> libksba 1.3.5 Collecting legal info ERROR: No hash found for AUTHORS ERROR: No hash found for COPYING ERROR: No hash found for COPYING.GPLv2 ERROR: No hash found for COPYING.GPLv3 ERROR: No hash found for COPYING.LGPLv3 >>> libraw1394 2.1.1 Collecting legal info ERROR: No hash found for COPYING.LIB >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> psplash 5b3c1cc28f5abdc2c33830150b48b278cc4f7bca Collecting legal info >>> host-autoconf 2.69 Collecting legal info ERROR: No hash found for COPYINGv3 ERROR: No hash found for COPYING.EXCEPTION >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined) WARNING: armbian-firmware-455d6b6701178dafe7fd0168eb4a4ef78a8d24a3: cannot save license (ARMBIAN_FIRMWARE_LICENSE_FILES not defined) WARNING: psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca: cannot save license (PSPLASH_LICENSE_FILES not defined) Legal info produced in /home/peko/autobuild/instance-2/output/legal-info make: Leaving directory `/home/peko/autobuild/instance-2/buildroot'