in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44/lib' make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44/lib' Making install in src make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44/src' make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44/src' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/host/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c sg_bg_ctl sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_seek sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_stream_ctl sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_write_x sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/home/buildroot/autobuild/instance-2/output-1/host/bin' libtool: install: /usr/bin/install -c sg_bg_ctl /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_bg_ctl libtool: install: /usr/bin/install -c sg_compare_and_write /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_compare_and_write libtool: install: /usr/bin/install -c sg_decode_sense /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_decode_sense libtool: install: /usr/bin/install -c sg_format /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_format libtool: install: /usr/bin/install -c sg_get_config /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_get_config libtool: install: /usr/bin/install -c sg_get_lba_status /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_get_lba_status libtool: install: /usr/bin/install -c sg_ident /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_ident libtool: install: /usr/bin/install -c sg_inq /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_inq libtool: install: /usr/bin/install -c sg_logs /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_logs libtool: install: /usr/bin/install -c sg_luns /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_luns libtool: install: /usr/bin/install -c sg_modes /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rep_zones /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_identify /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_seek /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_seek libtool: install: /usr/bin/install -c sg_senddiag /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_stpg libtool: install: /usr/bin/install -c sg_stream_ctl /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_stream_ctl libtool: install: /usr/bin/install -c sg_sync /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_buffer /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_write_x /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_write_x libtool: install: /usr/bin/install -c sg_zone /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_zone libtool: install: /usr/bin/install -c sg_copy_results /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/buildroot/autobuild/instance-2/output-1/host/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/buildroot/autobuild/instance-2/output-1/host/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/buildroot/autobuild/instance-2/output-1/host/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/buildroot/autobuild/instance-2/output-1/host/bin/sgp_dd make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44/src' make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44/src' Making install in doc make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44/doc' make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/host/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 '/home/buildroot/autobuild/instance-2/output-1/host/share/man/man8' /usr/bin/install -c -m 644 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/buildroot/autobuild/instance-2/output-1/host/share/man/man8' make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44/doc' make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44/doc' Making install in scripts make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44/scripts' make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/host/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/buildroot/autobuild/instance-2/output-1/host/bin' make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44/scripts' make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44/scripts' make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44' make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44' make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44' make[1]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-sg3_utils-1.44' utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6.tar.gz: OK (sha256: 8b5ba0058a78de69faf6822bb10b457fff2f9e55dc112ccb81c35214b061c6e6) >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Extracting gzip -d -c /home/buildroot/autobuild/instance-2/dl/utp_com/utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-2/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6 -xf - >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Patching >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Configuring >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Building PATH="/home/buildroot/autobuild/instance-2/output-1/host/bin:/home/buildroot/autobuild/instance-2/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" PKG_CONFIG="/home/buildroot/autobuild/instance-2/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/autobuild/instance-2/output-1/host/lib/pkgconfig:/home/buildroot/autobuild/instance-2/output-1/host/share/pkgconfig" AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld" NM="/usr/bin/nm" CC="/usr/bin/gcc" GCC="/usr/bin/gcc" CXX="/usr/bin/g++" CPP="/usr/bin/cpp" OBJCOPY="/usr/bin/objcopy" RANLIB="/usr/bin/ranlib" CPPFLAGS="-I/home/buildroot/autobuild/instance-2/output-1/host/include" CFLAGS="-O2 -I/home/buildroot/autobuild/instance-2/output-1/host/include" CXXFLAGS="-O2 -I/home/buildroot/autobuild/instance-2/output-1/host/include" LDFLAGS="-L/home/buildroot/autobuild/instance-2/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-2/output-1/host/lib" INTLTOOL_PERL=/usr/bin/perl /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-2/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6 make[1]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6' /usr/bin/gcc -c -o utp_com.o utp_com.c -O2 -I/home/buildroot/autobuild/instance-2/output-1/host/include /usr/bin/gcc -o utp_com utp_com.o -L/home/buildroot/autobuild/instance-2/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-2/output-1/host/lib make[1]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6' >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Installing to host directory /usr/bin/install -D -m 755 /home/buildroot/autobuild/instance-2/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6/utp_com /home/buildroot/autobuild/instance-2/output-1/host/bin/utp_com whois_5.5.0.tar.xz: OK (sha256: 64ec63339d7ad559cd6722bd3141a1e5787817bd921841a813ee17a0a34b6f3d) >>> whois 5.5.0 Extracting xzcat /home/buildroot/autobuild/instance-2/dl/whois/whois_5.5.0.tar.xz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-2/output-1/build/whois-5.5.0 -xf - >>> whois 5.5.0 Patching >>> whois 5.5.0 Configuring >>> whois 5.5.0 Building PATH="/home/buildroot/autobuild/instance-2/output-1/host/bin:/home/buildroot/autobuild/instance-2/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 CC="/home/buildroot/autobuild/instance-2/output-1/host/bin/nios2-linux-gnu-gcc" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_FORTIFY_SOURCE=2" LIBS="" Makefile.depend whois mkpasswd -C /home/buildroot/autobuild/instance-2/output-1/build/whois-5.5.0 make[1]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/whois-5.5.0' /home/buildroot/autobuild/instance-2/output-1/host/bin/nios2-linux-gnu-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_FORTIFY_SOURCE=2 -MM -MG *.c > Makefile.depend make[1]: 'Makefile.depend' is up to date. /usr/bin/perl make_ip_del.pl < ip_del_list > ip_del.h /usr/bin/perl make_ip6_del.pl < ip6_del_list > ip6_del.h /usr/bin/perl make_as_del.pl < as_del_list > as_del.h /usr/bin/perl make_as32_del.pl < as32_del_list > as32_del.h /usr/bin/perl make_new_gtlds.pl < new_gtlds_list > new_gtlds.h /usr/bin/perl make_tld_serv.pl < tld_serv_list > tld_serv.h /home/buildroot/autobuild/instance-2/output-1/host/bin/nios2-linux-gnu-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_FORTIFY_SOURCE=2 -c utils.c /home/buildroot/autobuild/instance-2/output-1/host/bin/nios2-linux-gnu-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_FORTIFY_SOURCE=2 -c mkpasswd.c /home/buildroot/autobuild/instance-2/output-1/host/bin/nios2-linux-gnu-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_FORTIFY_SOURCE=2 -c whois.c /home/buildroot/autobuild/instance-2/output-1/host/bin/nios2-linux-gnu-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_FORTIFY_SOURCE=2 -o mkpasswd mkpasswd.o utils.o -lcrypt /home/buildroot/autobuild/instance-2/output-1/host/bin/nios2-linux-gnu-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_FORTIFY_SOURCE=2 -o whois whois.o utils.o make[1]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/whois-5.5.0' >>> whois 5.5.0 Installing to target PATH="/home/buildroot/autobuild/instance-2/output-1/host/bin:/home/buildroot/autobuild/instance-2/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 CC="/home/buildroot/autobuild/instance-2/output-1/host/bin/nios2-linux-gnu-gcc" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_FORTIFY_SOURCE=2" LIBS="" BASEDIR="/home/buildroot/autobuild/instance-2/output-1/target" install-whois install-mkpasswd -C /home/buildroot/autobuild/instance-2/output-1/build/whois-5.5.0 make[1]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/whois-5.5.0' install -d /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/ install -d /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/ install -d /home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man1/ install -d /home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man1/ install -d /home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man5/ install -m 0755 mkpasswd /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/ install -m 0755 whois /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/ install -m 0644 mkpasswd.1 /home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man1/ install -m 0644 whois.1 /home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man1/ install -m 0644 whois.conf.5 /home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man5/ make[1]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/whois-5.5.0' wpa_supplicant-2.9.tar.gz: OK (sha256: fcbdee7b4a64bea8177973299c8c824419c413ec2e3a95db63dd6a5dc3541f17) >>> wpa_supplicant 2.9 Extracting gzip -d -c /home/buildroot/autobuild/instance-2/dl/wpa_supplicant/wpa_supplicant-2.9.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-2/output-1/build/wpa_supplicant-2.9 -xf - >>> wpa_supplicant 2.9 Patching >>> wpa_supplicant 2.9 Configuring cp /home/buildroot/autobuild/instance-2/output-1/build/wpa_supplicant-2.9/wpa_supplicant/defconfig /home/buildroot/autobuild/instance-2/output-1/build/wpa_supplicant-2.9/wpa_supplicant/.config sed -i -e 's/^#\(CONFIG_IEEE80211AC\)/\1/' -e 's/^#\(CONFIG_IEEE80211N\)/\1/' -e 's/^#\(CONFIG_IEEE80211R\)/\1/' -e 's/^#\(CONFIG_INTERNAL_LIBTOMMATH\)/\1/' -e 's/^#\(CONFIG_DEBUG_FILE\)/\1/' -e 's/^#\(CONFIG_MATCH_IFACE\)/\1/' -e 's/^#\(CONFIG_AUTOSCAN_EXPONENTIAL\)/\1/' -e 's/^#\(CONFIG_AUTOSCAN_PERIODIC\)/\1/' -e 's/^\(CONFIG_SMARTCARD\)/#\1/' -e 's/^\(CONFIG_DRIVER_NL80211\)/#\1/' -e 's/^\(CONFIG_EAP\)/#\1/' -e 's/^\(CONFIG_AP\)/#\1/' -e 's/^\(CONFIG_P2P\)/#\1/' -e 's/^\(CONFIG_WIFI_DISPLAY\)/#\1/' -e 's/^\(CONFIG_DPP\)/#\1/' -e 's/^\(CONFIG_SAE\)/#\1/' -e 's/^\(CONFIG_OWE\)/#\1/' -e 's/^\(CONFIG_EAP_PWD\)/#\1/' -e 's/^\(CONFIG_CTRL_IFACE_DBUS_NEW\)/#\1/' -e '1iCONFIG_BGSCAN_SIMPLE=y' -e 's/#\(CONFIG_TLS=\).*/\1internal/' /home/buildroot/autobuild/instance-2/output-1/build/wpa_supplicant-2.9/wpa_supplicant/.config >>> wpa_supplicant 2.9 Building PATH="/home/buildroot/autobuild/instance-2/output-1/host/bin:/home/buildroot/autobuild/instance-2/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_FORTIFY_SOURCE=2 -I/home/buildroot/autobuild/instance-2/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/include/libnl3/" LDFLAGS="" BINDIR=/usr/sbin LIBS="" LIBS_c="" LIBS_p="" /usr/bin/make -j4 CC="/home/buildroot/autobuild/instance-2/output-1/host/bin/nios2-linux-gnu-gcc" -C /home/buildroot/autobuild/instance-2/output-1/build/wpa_supplicant-2.9/wpa_supplicant make[1]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/wpa_supplicant-2.9/wpa_supplicant' CC eap_register.c CC notify.c CC bss.c CC ../src/utils/wpa_debug.c CC ../src/utils/common.c CC ../src/utils/bitfield.c CC ../src/utils/wpabuf.c CC op_classes.c CC ../src/utils/os_unix.c CC config.c CC wmm_ac.c CC rrm.c CC ../src/utils/eloop.c CC ../src/rsn_supp/wpa_ft.c CC config_file.c CC ../src/rsn_supp/pmksa_cache.c CC ../src/rsn_supp/preauth.c CC ../src/rsn_supp/wpa_ie.c CC ../src/rsn_supp/wpa.c CC ibss_rsn.c CC hs20_supplicant.c CC ../src/common/wpa_common.c CC ../src/utils/uuid.c CC ../src/eap_common/eap_wsc_common.c CC ../src/eap_peer/eap_wsc.c CC ../src/wps/wps.c CC wps_supplicant.c CC ../src/wps/wps_common.c CC interworking.c CC ../src/wps/wps_attr_parse.c CC ../src/wps/wps_attr_build.c CC ../src/wps/wps_attr_process.c CC ../src/wps/wps_dev_attr.c CC ../src/wps/wps_enrollee.c CC ../src/eap_peer/eap_methods.c CC ../src/eapol_supp/eapol_supp_sm.c CC ../src/eap_peer/eap.c CC ../src/ap/wpa_auth_ie.c CC ../src/wps/wps_registrar.c CC ../src/crypto/crypto_internal-modexp.c CC ../src/ap/pmksa_cache_auth.c CC ../src/crypto/crypto_internal.c CC ../src/crypto/tls_none.c CC ../src/crypto/aes-internal.c CC ../src/crypto/aes-internal-dec.c CC ../src/crypto/aes-unwrap.c CC ../src/crypto/aes-omac1.c CC ../src/crypto/aes-wrap.c CC ../src/ap/wpa_auth.c CC ../src/crypto/aes-cbc.c CC ../src/tls/bignum.c CC ../src/crypto/aes-internal-enc.c CC ../src/crypto/md5.c CC ../src/crypto/rc4.c CC ../src/crypto/sha256.c CC ../src/crypto/md5-internal.c CC ../src/crypto/sha256-prf.c CC ../src/crypto/sha384-internal.c CC ../src/crypto/sha256-internal.c CC ../src/crypto/dh_groups.c CC ../src/crypto/sha512-internal.c CC ../src/crypto/dh_group5.c CC ../src/common/ctrl_iface_common.c CC ../src/crypto/random.c CC ../src/utils/base64.c CC ../src/common/hw_features_common.c CC ctrl_iface_unix.c CC ../src/common/ieee802_11_common.c CC ../src/crypto/sha1.c CC ../src/eap_common/eap_common.c CC ../src/crypto/sha1-prf.c CC ../src/crypto/sha1-pbkdf2.c CC bgscan_simple.c CC bgscan.c CC ../src/crypto/sha1-internal.c CC autoscan_exponential.c CC autoscan_periodic.c CC autoscan.c CC ../src/common/gas.c CC ../src/drivers/driver_common.c CC offchannel.c CC gas_query.c CC blacklist.c CC ctrl_iface.c CC wpas_glue.c CC main.c CC events.c CC ../src/drivers/driver_wired.c CC scan.c CC ../src/drivers/driver_wired_common.c CC ../src/drivers/netlink.c CC ../src/drivers/linux_ioctl.c CC ../src/drivers/rfkill.c CC wpa_supplicant.c CC ../src/drivers/driver_wext.c CC ../src/drivers/drivers.c CC ../src/common/wpa_ctrl.c CC ../src/common/cli.c CC ../src/l2_packet/l2_packet_linux.c sed systemd/wpa_supplicant.service.in sed systemd/wpa_supplicant.service.arg.in sed systemd/wpa_supplicant-nl80211.service.arg.in sed systemd/wpa_supplicant-wired.service.arg.in sed dbus/fi.w1.wpa_supplicant1.service.in CC wpa_passphrase.c CC ../src/utils/edit_simple.c LD wpa_supplicant LD wpa_passphrase CC wpa_cli.c LD wpa_cli make[1]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/wpa_supplicant-2.9/wpa_supplicant' >>> wpa_supplicant 2.9 Installing to staging directory >>> wpa_supplicant 2.9 Fixing libtool files for la in $(find /home/buildroot/autobuild/instance-2/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/autobuild/instance-2/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-2/output-1/host/nios2-buildroot-linux-gnu/sysroot:@STAGING_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/buildroot/autobuild/instance-2/output-1/host/nios2-buildroot-linux-gnu/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/autobuild/instance-2/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> wpa_supplicant 2.9 Installing to target /usr/bin/install -m 0755 -D /home/buildroot/autobuild/instance-2/output-1/build/wpa_supplicant-2.9/wpa_supplicant/wpa_supplicant /home/buildroot/autobuild/instance-2/output-1/target/usr/sbin/wpa_supplicant /usr/bin/install -m 644 -D package/wpa_supplicant/wpa_supplicant.conf /home/buildroot/autobuild/instance-2/output-1/target/etc/wpa_supplicant.conf /usr/bin/install -m 0644 -D /home/buildroot/autobuild/instance-2/output-1/build/wpa_supplicant-2.9/wpa_supplicant/dbus/dbus-wpa_supplicant.conf /home/buildroot/autobuild/instance-2/output-1/target/etc/dbus-1/system.d/wpa_supplicant.conf >>> Finalizing target directory # Check files that are touched by more than one package rm -f /home/buildroot/autobuild/instance-2/output-1/target/usr/share/glib-2.0/schemas/*.xml /home/buildroot/autobuild/instance-2/output-1/target/usr/share/glib-2.0/schemas/*.dtd /home/buildroot/autobuild/instance-2/output-1/host/bin/glib-compile-schemas /home/buildroot/autobuild/instance-2/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/share/glib-2.0/schemas --targetdir=/home/buildroot/autobuild/instance-2/output-1/target/usr/share/glib-2.0/schemas No schema files found: doing nothing. mkdir -p /home/buildroot/autobuild/instance-2/output-1/target/etc echo "buildroot" > /home/buildroot/autobuild/instance-2/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/instance-2/output-1/target/etc/hosts mkdir -p /home/buildroot/autobuild/instance-2/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/instance-2/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/instance-2/output-1/target/etc/shadow rm -f /home/buildroot/autobuild/instance-2/output-1/target/bin/sh rm -f /home/buildroot/autobuild/instance-2/output-1/build/locales.nopurge for i in C en_US locale-archive; do echo $i >> /home/buildroot/autobuild/instance-2/output-1/build/locales.nopurge; done for dir in /home/buildroot/autobuild/instance-2/output-1/target/usr/share/locale; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/instance-2/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/autobuild/instance-2/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/instance-2/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/instance-2/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/include /home/buildroot/autobuild/instance-2/output-1/target/usr/share/aclocal \ /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/pkgconfig /home/buildroot/autobuild/instance-2/output-1/target/usr/share/pkgconfig \ /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/cmake /home/buildroot/autobuild/instance-2/output-1/target/usr/share/cmake find /home/buildroot/autobuild/instance-2/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/instance-2/output-1/target/lib/ /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/ /home/buildroot/autobuild/instance-2/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/share/gdb rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/share/bash-completion rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/share/zsh rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/man /home/buildroot/autobuild/instance-2/output-1/target/usr/share/man rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/info /home/buildroot/autobuild/instance-2/output-1/target/usr/share/info rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/doc /home/buildroot/autobuild/instance-2/output-1/target/usr/share/doc rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/instance-2/output-1/target/usr/share 2>/dev/null || true find /home/buildroot/autobuild/instance-2/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/instance-2/output-1/host/bin/nios2-linux-gnu-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/buildroot/autobuild/instance-2/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/instance-2/output-1/host/bin/nios2-linux-gnu-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/buildroot/autobuild/instance-2/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/instance-2/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/instance-2/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2019.11-git-02708-g2130f663ec"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2019.11-git"; \ echo "PRETTY_NAME=\"Buildroot 2019.11-git\"" \ ) > /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/instance-2/output-1/target/etc >>> Sanitizing RPATH in target tree /home/buildroot/autobuild/instance-2/buildroot/support/scripts/fix-rpath target touch /home/buildroot/autobuild/instance-2/output-1/target/usr make: Leaving directory '/home/buildroot/autobuild/instance-2/buildroot' make: Entering directory '/home/buildroot/autobuild/instance-2/buildroot' >>> Buildroot 2019.11-git-02708-g2130f663ec Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-none Collecting legal info >>> skeleton-init-common Collecting legal info sourceryg++-2018.05-5-nios2-linux-gnu.src.tar.bz2: OK (md5: be42ab83da2e8db7b73dc890c2549570) sourceryg++-2018.05-5-nios2-linux-gnu.src.tar.bz2: OK (sha256: d73a6364106dd62352711f932d3be8e97fdaaa548995678b5d38d9f21e22437a) >>> toolchain-external-codesourcery-niosII 2018.05-5 Collecting legal info >>> toolchain Collecting legal info >>> bctoolbox 0.4.0 Collecting legal info ERROR: No hash found for COPYING >>> host-cmake 3.15.5 Collecting legal info Copyright.txt: OK (sha256: dc628fb936a5d229296d42083f9a8218aa32204c016919e784404c9ec58776e9) >>> host-pkgconf 1.6.1 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> ccid 1.4.31 Collecting legal info COPYING: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) >>> libusb 1.0.23 Collecting legal info COPYING: OK (sha256: 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a) >>> pcsc-lite 1.8.25 Collecting legal info COPYING: OK (sha256: 40d4358bb8dc8d30f5365ae6d999b6f820bbc051b292912482f2e4d0ebd837e1) GPL-3.0.txt: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-autoconf 2.69 Collecting legal info COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> dbus-glib 0.110 Collecting legal info COPYING: OK (sha256: ef1634fc21d9112dca08f2557313584719d534d05213cf14f3c77938506266b4) >>> dbus 1.12.16 Collecting legal info COPYING: OK (sha256: 0e46f54efb12d04ab5c33713bacd0e140c9a35b57ae29e03c853203266e8f3a1) >>> expat 2.2.9 Collecting legal info COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76) >>> host-dbus 1.12.16 Collecting legal info COPYING: OK (sha256: 0e46f54efb12d04ab5c33713bacd0e140c9a35b57ae29e03c853203266e8f3a1) >>> host-expat 2.2.9 Collecting legal info COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76) >>> host-dbus-glib 0.110 Collecting legal info COPYING: OK (sha256: ef1634fc21d9112dca08f2557313584719d534d05213cf14f3c77938506266b4) >>> host-libglib2 2.62.0 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-gettext Collecting legal info >>> host-gettext-tiny 73fc3e7ef7e016a3874b632fd0475969d288f309 Collecting legal info LICENSE: OK (sha256: b57aa4fdc1c614c28d41c1e2d5c4090935964c5f86291ba7d1c99ffd1d698b34) extra/COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-libffi 3.3-rc0 Collecting legal info LICENSE: OK (sha256: 0f4d7a0bfb83c37465d42dc305f124189196cc0cc2cc8d6f8461103682aebbc5) >>> host-meson 0.52.0 Collecting legal info COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) >>> host-ninja 1.9.0 Collecting legal info COPYING: OK (sha256: eb7e9ab9690124c5c9f42bdc81383d886a3dede26345b6ed15bbad7caf81f7ea) >>> host-python3 3.8.0 Collecting legal info LICENSE: OK (sha256: a77d71d6be6f9032e6b6e5d2cf6da68f9eeab9036edfbc043633c8979cd5e82c) >>> host-zlib Collecting legal info >>> host-libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> host-python3-setuptools 41.4.0 Collecting legal info LICENSE: OK (sha256: c32a3ac395af6321efd28be73d06a00f0db6ab887d1c21d4fec46128d2056d5a) >>> host-pcre 8.43 Collecting legal info LICENCE: OK (sha256: a5fce68baf797e0918463a4437ef75984c41118f43850ddeabda1b5a90154309) >>> host-util-linux 2.34 Collecting legal info README.licensing: OK (sha256: 4335620e8f478ee4dc4d26540448d39469091ef1d8e3fbbbb8bf753206ceac74) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libglib2 2.62.0 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libffi 3.3-rc0 Collecting legal info LICENSE: OK (sha256: 0f4d7a0bfb83c37465d42dc305f124189196cc0cc2cc8d6f8461103682aebbc5) >>> pcre 8.43 Collecting legal info LICENCE: OK (sha256: a5fce68baf797e0918463a4437ef75984c41118f43850ddeabda1b5a90154309) >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> ddrescue 1.24 Collecting legal info COPYING: OK (sha256: 3d77c1a58fbde5ddba612d1fe09965e20a3804953eca12e8c1892298bb8a5eef) >>> host-lzip 1.20 Collecting legal info COPYING: OK (sha256: 3d77c1a58fbde5ddba612d1fe09965e20a3804953eca12e8c1892298bb8a5eef) >>> gdk-pixbuf 2.36.10 Collecting legal info COPYING: OK (sha256: d245807f90032872d1438d741ed21e2490e1175dc8aa3afa5ddb6c8e529b58e5) >>> host-gdk-pixbuf 2.36.10 Collecting legal info COPYING: OK (sha256: d245807f90032872d1438d741ed21e2490e1175dc8aa3afa5ddb6c8e529b58e5) >>> host-libpng 1.6.37 Collecting legal info LICENSE: OK (sha256: bf5e22b9dce8464064ae17a48ea1133c3369ac9e1d80ef9e320e5219aa14ea9b) >>> gtest 1.10.0 Collecting legal info googletest/LICENSE: OK (sha256: 9702de7e4117a8e2b20dafab11ffda58c198aede066406496bef670d40a22138) >>> libcsv 3.0.3 Collecting legal info COPYING.LESSER: OK (sha256: 6876b170378d38f65aadd271485f0a5c45beaa043a7d3de5e1636ec927922c83) >>> libdcadec 0.2.0 Collecting legal info COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libedit 20180525-3.1 Collecting legal info COPYING: OK (sha256: 9da6c9c74987a36c84302982799d17d2f748ba1c1c0c471425716173c1d07649) >>> ncurses 6.1 Collecting legal info COPYING: OK (sha256: 86106f0da1cf5ccfa0f0651665dd1b4515e8edad1c7972780155770548b317d9) >>> host-ncurses 6.1 Collecting legal info COPYING: OK (sha256: 86106f0da1cf5ccfa0f0651665dd1b4515e8edad1c7972780155770548b317d9) >>> libmodplug 0.8.9.0 Collecting legal info COPYING: OK (sha256: 49942e7b3b175f549e751feb08b5270ca6f6c5fb7a1be9f9517db275ec32c92e) >>> libogg 1.3.4 Collecting legal info COPYING: OK (sha256: d2ab5758336489da61c12cc5bb757da5339c4ae9001f9bb0562b4370249af814) >>> lksctp-tools 1.0.17 Collecting legal info ERROR: No hash found for COPYING.lib ERROR: No hash found for COPYING >>> neardal 4143d130ed39299bfc59d08d2c7c77dbc7f809e9 Collecting legal info COPYING: OK (sha256: 296a87e9098d3f2ce1ef80c73c53399dc2c7412f35d4175c45810ea15ed86406) >>> opencv 2.4.13.7 Collecting legal info LICENSE: OK (sha256: 46e42877dfc3ac65769292cb4dc1a04b204ad9e40859a390f4c035d6179fbcc4) >>> openpgm release-5-2-122 Collecting legal info ERROR: No hash found for openpgm/pgm/LICENSE >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> spi-tools 0.8.3 Collecting legal info LICENSE: OK (sha256: a01259a1b522cf0de95824f9860613b453153eebac468e96196d5d7dba84786c) >>> spice-protocol 0.12.14 Collecting legal info ERROR: No hash found for COPYING >>> statserial 1.1 Collecting legal info ERROR: No hash found for COPYING >>> tremor 7c30a66346199f3f09017a09567c6c8a3a0eedc8 Collecting legal info COPYING: OK (sha256: d2ab5758336489da61c12cc5bb757da5339c4ae9001f9bb0562b4370249af814) >>> uftp 4.10 Collecting legal info LICENSE.txt: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Collecting legal info LICENSE: OK (sha256: a45d0bb572ed792ed34627a72621834b3ba92aab6e2cc4e04301dee7a728d753) >>> host-sg3_utils 1.44 Collecting legal info COPYING: OK (sha256: d516b8b337a77e3d4c65dffe708ca7fb25b1cb4ec77ec362cf11ed659b9250bc) BSD_LICENSE: OK (sha256: 31f6d59679e0fb21c9358f22484e6e3c53e20ef08c0950fd38a4a867cb55edc9) >>> whois 5.5.0 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> wpa_supplicant 2.9 Collecting legal info README: OK (sha256: 9da5dd0776da266b180b915e460ff75c6ff729aca1196ab396529510f24f3761) WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-codesourcery-niosII-2018.05-5: cannot save license (TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/instance-2/output-1/legal-info make: Leaving directory '/home/buildroot/autobuild/instance-2/buildroot'