checking whether corgi module is requested... no
checking whether collie module is requested... no
checking whether arctic2 module is requested... no
checking whether dmc_dus3000 module is requested... no
checking whether cy8mrln-palmpre module is requested... no
checking whether galax module is requested... no
checking whether one-wire-ts-input module is requested... no
checking where to place modules... ${libdir}/ts
checking whether to enable debugging... no
checking whether to enable tools... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating etc/Makefile
config.status: creating plugins/Makefile
config.status: creating src/Makefile
config.status: creating tests/Makefile
config.status: creating tools/Makefile
config.status: creating doc/Makefile
config.status: creating tslib.pc
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
>>> tslib 1.22 Building
PATH="/home/peko/autobuild/instance-1/output-1/host/bin:/home/peko/autobuild/instance-1/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games"  /usr/bin/make -j4  -C /home/peko/autobuild/instance-1/output-1/build/tslib-1.22/
make[1]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
/usr/bin/make  all-recursive
make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
Making all in etc
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/etc'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/etc'
Making all in src
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/src'
  CC       ts_attach.lo
  CC       ts_close.lo
  CC       ts_config.lo
  CC       ts_error.lo
  CC       ts_fd.lo
  CC       ts_load_module.lo
  CC       ts_open.lo
  CC       ts_parse_vars.lo
  CC       ts_read.lo
  CC       ts_read_raw.lo
  CC       ts_option.lo
  CC       ts_setup.lo
  CC       ts_version.lo
  CC       ts_config_filter.lo
  CC       ts_get_eventpath.lo
  CC       ts_strsep.lo
  CCLD     libts.la
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/src'
Making all in plugins
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/plugins'
  CC       linear.lo
  CC       dejitter.lo
  CC       variance.lo
  CC       median.lo
  CC       pthres.lo
  CC       debounce.lo
  CC       skip.lo
  CC       invert.lo
  CC       iir.lo
  CC       evthres.lo
  CC       lowpass.lo
  CC       input-raw.lo
  CC       touchkit-raw.lo
  CC       waveshare-raw.lo
  CCLD     linear.la
  CCLD     dejitter.la
  CCLD     variance.la
  CCLD     median.la
  CCLD     pthres.la
  CCLD     debounce.la
  CCLD     skip.la
  CCLD     invert.la
  CCLD     iir.la
  CCLD     evthres.la
  CCLD     lowpass.la
  CCLD     input.la
  CCLD     touchkit.la
  CCLD     waveshare.la
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/plugins'
Making all in tests
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tests'
  CC       ts_test.o
  CC       testutils.o
  CC       font_8x8.o
  CC       font_8x16.o
  CC       fbutils-linux.o
  CC       ts_test_mt.o
  CC       ts_calibrate.o
  CC       ts_calibrate_common.o
  CC       ts_conf.o
  CC       ts_print.o
  CC       ts_print_mt.o
  CC       ts_print_raw.o
  CC       ts_harvest.o
  CC       ts_finddev.o
  CC       ts_verify.o
  CCLD     ts_test
  CCLD     ts_test_mt
  CCLD     ts_calibrate
  CCLD     ts_conf
  CCLD     ts_print
  CCLD     ts_print_mt
  CCLD     ts_print_raw
  CCLD     ts_harvest
  CCLD     ts_finddev
  CCLD     ts_verify
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tests'
Making all in tools
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tools'
  CC       ts_uinput.o
  CCLD     ts_uinput
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tools'
Making all in doc
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/doc'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/doc'
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
make[1]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
>>> tslib 1.22 Installing to staging directory
PATH="/home/peko/autobuild/instance-1/output-1/host/bin:/home/peko/autobuild/instance-1/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games"  /usr/bin/make -j4 DESTDIR=/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot LDFLAGS=-L/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib install -C /home/peko/autobuild/instance-1/output-1/build/tslib-1.22/
make[1]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
Making install in etc
make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/etc'
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/etc'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/etc'
 /usr/bin/install -c -m 644 ts.conf '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/etc'
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/etc'
make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/etc'
Making install in src
make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/src'
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/src'
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib'
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libts.la '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib'
 /usr/bin/install -c -m 644 tslib.h '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include'
libtool: install: /usr/bin/install -c .libs/libts.so.0.10.4 /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libts.so.0.10.4
libtool: install: (cd /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib && { ln -s -f libts.so.0.10.4 libts.so.0 || { rm -f libts.so.0 && ln -s libts.so.0.10.4 libts.so.0; }; })
libtool: install: (cd /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib && { ln -s -f libts.so.0.10.4 libts.so || { rm -f libts.so && ln -s libts.so.0.10.4 libts.so; }; })
libtool: install: /usr/bin/install -c .libs/libts.lai /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libts.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/src'
make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/src'
Making install in plugins
make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/plugins'
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/plugins'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   linear.la dejitter.la variance.la median.la pthres.la debounce.la skip.la invert.la iir.la evthres.la lowpass.la input.la touchkit.la waveshare.la '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts'
libtool: install: /usr/bin/install -c .libs/linear.so /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/linear.so
libtool: install: /usr/bin/install -c .libs/linear.lai /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/linear.la
libtool: install: /usr/bin/install -c .libs/dejitter.so /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/dejitter.so
libtool: install: /usr/bin/install -c .libs/dejitter.lai /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/dejitter.la
libtool: install: /usr/bin/install -c .libs/variance.so /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/variance.so
libtool: install: /usr/bin/install -c .libs/variance.lai /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/variance.la
libtool: install: /usr/bin/install -c .libs/median.so /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/median.so
libtool: install: /usr/bin/install -c .libs/median.lai /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/median.la
libtool: install: /usr/bin/install -c .libs/pthres.so /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/pthres.so
libtool: install: /usr/bin/install -c .libs/pthres.lai /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/pthres.la
libtool: install: /usr/bin/install -c .libs/debounce.so /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/debounce.so
libtool: install: /usr/bin/install -c .libs/debounce.lai /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/debounce.la
libtool: install: /usr/bin/install -c .libs/skip.so /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/skip.so
libtool: install: /usr/bin/install -c .libs/skip.lai /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/skip.la
libtool: install: /usr/bin/install -c .libs/invert.so /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/invert.so
libtool: install: /usr/bin/install -c .libs/invert.lai /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/invert.la
libtool: install: /usr/bin/install -c .libs/iir.so /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/iir.so
libtool: install: /usr/bin/install -c .libs/iir.lai /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/iir.la
libtool: install: /usr/bin/install -c .libs/evthres.so /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/evthres.so
libtool: install: /usr/bin/install -c .libs/evthres.lai /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/evthres.la
libtool: install: /usr/bin/install -c .libs/lowpass.so /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/lowpass.so
libtool: install: /usr/bin/install -c .libs/lowpass.lai /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/lowpass.la
libtool: install: /usr/bin/install -c .libs/input.so /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/input.so
libtool: install: /usr/bin/install -c .libs/input.lai /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/input.la
libtool: install: /usr/bin/install -c .libs/touchkit.so /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/touchkit.so
libtool: install: /usr/bin/install -c .libs/touchkit.lai /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/touchkit.la
libtool: install: /usr/bin/install -c .libs/waveshare.so /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/waveshare.so
libtool: install: /usr/bin/install -c .libs/waveshare.lai /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/ts/waveshare.la
libtool: warning: remember to run 'libtool --finish /usr/lib/ts'
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/plugins'
make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/plugins'
Making install in tests
make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tests'
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tests'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/bin'
  /bin/bash ../libtool   --mode=install /usr/bin/install -c ts_test ts_test_mt ts_calibrate ts_conf ts_print ts_print_mt ts_print_raw ts_harvest ts_finddev ts_verify '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/bin'
libtool: install: /usr/bin/install -c ts_test /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/bin/ts_test
libtool: install: /usr/bin/install -c ts_test_mt /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/bin/ts_test_mt
libtool: install: /usr/bin/install -c ts_calibrate /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/bin/ts_calibrate
libtool: install: /usr/bin/install -c ts_conf /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/bin/ts_conf
libtool: install: /usr/bin/install -c ts_print /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/bin/ts_print
libtool: install: /usr/bin/install -c ts_print_mt /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/bin/ts_print_mt
libtool: install: /usr/bin/install -c ts_print_raw /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/bin/ts_print_raw
libtool: install: /usr/bin/install -c ts_harvest /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/bin/ts_harvest
libtool: install: /usr/bin/install -c ts_finddev /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/bin/ts_finddev
libtool: install: /usr/bin/install -c ts_verify /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/bin/ts_verify
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tests'
make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tests'
Making install in tools
make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tools'
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tools'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/bin'
  /bin/bash ../libtool   --mode=install /usr/bin/install -c ts_uinput '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/bin'
libtool: install: /usr/bin/install -c ts_uinput /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/bin/ts_uinput
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tools'
make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tools'
Making install in doc
make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/doc'
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/doc'
make[3]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/share/man/man1'
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/share/man/man3'
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/share/man/man5'
 /usr/bin/install -c -m 644 ts_calibrate.1 ts_conf.1 ts_finddev.1 ts_harvest.1 ts_print.1 ts_print_mt.1 ts_print_raw.1 ts_test.1 ts_test_mt.1 ts_uinput.1 ts_verify.1 '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/share/man/man1'
 /usr/bin/install -c -m 644 ts.conf.5 '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/share/man/man5'
 /usr/bin/install -c -m 644 ts_close.3 ts_close_restricted.3 ts_conf_get.3 ts_config.3 ts_conf_set.3 ts_error_fn.3 ts_fd.3 ts_get_eventpath.3 ts_libversion.3 tslib_version.3 ts_open.3 ts_open_restricted.3 ts_print_ascii_logo.3 ts_read.3 ts_read_mt.3 ts_read_raw.3 ts_read_raw_mt.3 ts_setup.3 '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/share/man/man3'
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/doc'
make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/doc'
make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
make[3]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/pkgconfig'
 /usr/bin/install -c -m 644 tslib.pc '/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/pkgconfig'
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
make[1]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
>>> tslib 1.22 Fixing libtool files
for la in $(find /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib* -name "*.la"); do \
	cp -a "${la}" "${la}.fixed" && \
	/bin/sed -i -e "s:/home/peko/autobuild/instance-1/output-1:@BASE_DIR@:g" \
		-e "s:/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot:@STAGING_DIR@:g" \
		 -e "s:/home/peko/autobuild/instance-1/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \
		-e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \
		-e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \
		 -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/peko/autobuild/instance-1/output-1/host/opt/ext-toolchain:g" \
		-e "s:@STAGING_DIR@:/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot:g" \
		-e "s:@BASE_DIR@:/home/peko/autobuild/instance-1/output-1:g" \
		"${la}.fixed" && \
	if cmp -s "${la}" "${la}.fixed"; then \
		rm -f "${la}.fixed"; \
	else \
		mv "${la}.fixed" "${la}"; \
	fi || exit 1; \
done
>>> tslib 1.22 Installing to target
PATH="/home/peko/autobuild/instance-1/output-1/host/bin:/home/peko/autobuild/instance-1/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games"  /usr/bin/make -j4 DESTDIR=/home/peko/autobuild/instance-1/output-1/target install -C /home/peko/autobuild/instance-1/output-1/build/tslib-1.22/
make[1]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
Making install in etc
make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/etc'
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/etc'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/target/etc'
 /usr/bin/install -c -m 644 ts.conf '/home/peko/autobuild/instance-1/output-1/target/etc'
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/etc'
make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/etc'
Making install in src
make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/src'
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/src'
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/target/usr/lib'
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/target/usr/include'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libts.la '/home/peko/autobuild/instance-1/output-1/target/usr/lib'
 /usr/bin/install -c -m 644 tslib.h '/home/peko/autobuild/instance-1/output-1/target/usr/include'
libtool: install: /usr/bin/install -c .libs/libts.so.0.10.4 /home/peko/autobuild/instance-1/output-1/target/usr/lib/libts.so.0.10.4
libtool: install: (cd /home/peko/autobuild/instance-1/output-1/target/usr/lib && { ln -s -f libts.so.0.10.4 libts.so.0 || { rm -f libts.so.0 && ln -s libts.so.0.10.4 libts.so.0; }; })
libtool: install: (cd /home/peko/autobuild/instance-1/output-1/target/usr/lib && { ln -s -f libts.so.0.10.4 libts.so || { rm -f libts.so && ln -s libts.so.0.10.4 libts.so; }; })
libtool: install: /usr/bin/install -c .libs/libts.lai /home/peko/autobuild/instance-1/output-1/target/usr/lib/libts.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/src'
make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/src'
Making install in plugins
make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/plugins'
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/plugins'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/target/usr/lib/ts'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   linear.la dejitter.la variance.la median.la pthres.la debounce.la skip.la invert.la iir.la evthres.la lowpass.la input.la touchkit.la waveshare.la '/home/peko/autobuild/instance-1/output-1/target/usr/lib/ts'
libtool: install: /usr/bin/install -c .libs/linear.so /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/linear.so
libtool: install: /usr/bin/install -c .libs/linear.lai /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/linear.la
libtool: install: /usr/bin/install -c .libs/dejitter.so /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/dejitter.so
libtool: install: /usr/bin/install -c .libs/dejitter.lai /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/dejitter.la
libtool: install: /usr/bin/install -c .libs/variance.so /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/variance.so
libtool: install: /usr/bin/install -c .libs/variance.lai /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/variance.la
libtool: install: /usr/bin/install -c .libs/median.so /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/median.so
libtool: install: /usr/bin/install -c .libs/median.lai /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/median.la
libtool: install: /usr/bin/install -c .libs/pthres.so /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/pthres.so
libtool: install: /usr/bin/install -c .libs/pthres.lai /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/pthres.la
libtool: install: /usr/bin/install -c .libs/debounce.so /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/debounce.so
libtool: install: /usr/bin/install -c .libs/debounce.lai /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/debounce.la
libtool: install: /usr/bin/install -c .libs/skip.so /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/skip.so
libtool: install: /usr/bin/install -c .libs/skip.lai /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/skip.la
libtool: install: /usr/bin/install -c .libs/invert.so /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/invert.so
libtool: install: /usr/bin/install -c .libs/invert.lai /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/invert.la
libtool: install: /usr/bin/install -c .libs/iir.so /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/iir.so
libtool: install: /usr/bin/install -c .libs/iir.lai /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/iir.la
libtool: install: /usr/bin/install -c .libs/evthres.so /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/evthres.so
libtool: install: /usr/bin/install -c .libs/evthres.lai /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/evthres.la
libtool: install: /usr/bin/install -c .libs/lowpass.so /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/lowpass.so
libtool: install: /usr/bin/install -c .libs/lowpass.lai /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/lowpass.la
libtool: install: /usr/bin/install -c .libs/input.so /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/input.so
libtool: install: /usr/bin/install -c .libs/input.lai /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/input.la
libtool: install: /usr/bin/install -c .libs/touchkit.so /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/touchkit.so
libtool: install: /usr/bin/install -c .libs/touchkit.lai /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/touchkit.la
libtool: install: /usr/bin/install -c .libs/waveshare.so /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/waveshare.so
libtool: install: /usr/bin/install -c .libs/waveshare.lai /home/peko/autobuild/instance-1/output-1/target/usr/lib/ts/waveshare.la
libtool: warning: remember to run 'libtool --finish /usr/lib/ts'
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/plugins'
make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/plugins'
Making install in tests
make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tests'
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tests'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/target/usr/bin'
  /bin/bash ../libtool   --mode=install /usr/bin/install -c ts_test ts_test_mt ts_calibrate ts_conf ts_print ts_print_mt ts_print_raw ts_harvest ts_finddev ts_verify '/home/peko/autobuild/instance-1/output-1/target/usr/bin'
libtool: install: /usr/bin/install -c ts_test /home/peko/autobuild/instance-1/output-1/target/usr/bin/ts_test
libtool: install: /usr/bin/install -c ts_test_mt /home/peko/autobuild/instance-1/output-1/target/usr/bin/ts_test_mt
libtool: install: /usr/bin/install -c ts_calibrate /home/peko/autobuild/instance-1/output-1/target/usr/bin/ts_calibrate
libtool: install: /usr/bin/install -c ts_conf /home/peko/autobuild/instance-1/output-1/target/usr/bin/ts_conf
libtool: install: /usr/bin/install -c ts_print /home/peko/autobuild/instance-1/output-1/target/usr/bin/ts_print
libtool: install: /usr/bin/install -c ts_print_mt /home/peko/autobuild/instance-1/output-1/target/usr/bin/ts_print_mt
libtool: install: /usr/bin/install -c ts_print_raw /home/peko/autobuild/instance-1/output-1/target/usr/bin/ts_print_raw
libtool: install: /usr/bin/install -c ts_harvest /home/peko/autobuild/instance-1/output-1/target/usr/bin/ts_harvest
libtool: install: /usr/bin/install -c ts_finddev /home/peko/autobuild/instance-1/output-1/target/usr/bin/ts_finddev
libtool: install: /usr/bin/install -c ts_verify /home/peko/autobuild/instance-1/output-1/target/usr/bin/ts_verify
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tests'
make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tests'
Making install in tools
make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tools'
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tools'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/target/usr/bin'
  /bin/bash ../libtool   --mode=install /usr/bin/install -c ts_uinput '/home/peko/autobuild/instance-1/output-1/target/usr/bin'
libtool: install: /usr/bin/install -c ts_uinput /home/peko/autobuild/instance-1/output-1/target/usr/bin/ts_uinput
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tools'
make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/tools'
Making install in doc
make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/doc'
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/doc'
make[3]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/target/usr/share/man/man1'
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/target/usr/share/man/man3'
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/target/usr/share/man/man5'
 /usr/bin/install -c -m 644 ts.conf.5 '/home/peko/autobuild/instance-1/output-1/target/usr/share/man/man5'
 /usr/bin/install -c -m 644 ts_calibrate.1 ts_conf.1 ts_finddev.1 ts_harvest.1 ts_print.1 ts_print_mt.1 ts_print_raw.1 ts_test.1 ts_test_mt.1 ts_uinput.1 ts_verify.1 '/home/peko/autobuild/instance-1/output-1/target/usr/share/man/man1'
 /usr/bin/install -c -m 644 ts_close.3 ts_close_restricted.3 ts_conf_get.3 ts_config.3 ts_conf_set.3 ts_error_fn.3 ts_fd.3 ts_get_eventpath.3 ts_libversion.3 tslib_version.3 ts_open.3 ts_open_restricted.3 ts_print_ascii_logo.3 ts_read.3 ts_read_mt.3 ts_read_raw.3 ts_read_raw_mt.3 ts_setup.3 '/home/peko/autobuild/instance-1/output-1/target/usr/share/man/man3'
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/doc'
make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22/doc'
make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
make[3]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/target/usr/lib/pkgconfig'
 /usr/bin/install -c -m 644 tslib.pc '/home/peko/autobuild/instance-1/output-1/target/usr/lib/pkgconfig'
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
make[1]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/tslib-1.22'
>>>   Finalizing host directory
>>>   Finalizing target directory
/bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L  console 0 vt100 #~' /home/peko/autobuild/instance-1/output-1/target/etc/inittab
/bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/peko/autobuild/instance-1/output-1/target/etc/inittab
if grep -q CONFIG_ASH=y /home/peko/autobuild/instance-1/output-1/build/busybox-1.31.1/.config; then grep -qsE '^/bin/ash$' /home/peko/autobuild/instance-1/output-1/target/etc/shells || echo "/bin/ash" >> /home/peko/autobuild/instance-1/output-1/target/etc/shells; fi
if grep -q CONFIG_HUSH=y /home/peko/autobuild/instance-1/output-1/build/busybox-1.31.1/.config; then grep -qsE '^/bin/hush$' /home/peko/autobuild/instance-1/output-1/target/etc/shells || echo "/bin/hush" >> /home/peko/autobuild/instance-1/output-1/target/etc/shells; fi
mkdir -p /home/peko/autobuild/instance-1/output-1/target/etc
echo "buildroot" > /home/peko/autobuild/instance-1/output-1/target/etc/hostname
/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/peko/autobuild/instance-1/output-1/target/etc/hosts
mkdir -p /home/peko/autobuild/instance-1/output-1/target/etc
echo "Welcome to Buildroot" > /home/peko/autobuild/instance-1/output-1/target/etc/issue
/bin/sed -i -e s,^root:[^:]*:,root::, /home/peko/autobuild/instance-1/output-1/target/etc/shadow
rm -f /home/peko/autobuild/instance-1/output-1/target/bin/sh
if [ -x /home/peko/autobuild/instance-1/output-1/target/sbin/swapon -a -x /home/peko/autobuild/instance-1/output-1/target/sbin/swapoff ]; then /bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/peko/autobuild/instance-1/output-1/target/etc/inittab; else /bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/peko/autobuild/instance-1/output-1/target/etc/inittab; fi
printf '%s\n' C en_US locale-archive > /home/peko/autobuild/instance-1/output-1/build/locales.nopurge
for dir in /home/peko/autobuild/instance-1/output-1/target/usr/share/locale /home/peko/autobuild/instance-1/output-1/target/usr/share/X11/locale /home/peko/autobuild/instance-1/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/peko/autobuild/instance-1/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done
if [ -d /home/peko/autobuild/instance-1/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/peko/autobuild/instance-1/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/peko/autobuild/instance-1/output-1/target/usr/share/X11/locale/locale.dir; fi
rm -rf /home/peko/autobuild/instance-1/output-1/target/usr/include /home/peko/autobuild/instance-1/output-1/target/usr/share/aclocal \
	/home/peko/autobuild/instance-1/output-1/target/usr/lib/pkgconfig /home/peko/autobuild/instance-1/output-1/target/usr/share/pkgconfig \
	/home/peko/autobuild/instance-1/output-1/target/usr/lib/cmake /home/peko/autobuild/instance-1/output-1/target/usr/share/cmake \
	/home/peko/autobuild/instance-1/output-1/target/usr/doc
find /home/peko/autobuild/instance-1/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
find /home/peko/autobuild/instance-1/output-1/target/lib/ /home/peko/autobuild/instance-1/output-1/target/usr/lib/ /home/peko/autobuild/instance-1/output-1/target/usr/libexec/ \
	\( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f
find: '/home/peko/autobuild/instance-1/output-1/target/usr/libexec/': No such file or directory
rm -rf /home/peko/autobuild/instance-1/output-1/target/usr/share/gdb
rm -rf /home/peko/autobuild/instance-1/output-1/target/usr/share/bash-completion
rm -rf /home/peko/autobuild/instance-1/output-1/target/etc/bash_completion.d
rm -rf /home/peko/autobuild/instance-1/output-1/target/usr/share/zsh
rm -rf /home/peko/autobuild/instance-1/output-1/target/usr/man /home/peko/autobuild/instance-1/output-1/target/usr/share/man
rm -rf /home/peko/autobuild/instance-1/output-1/target/usr/info /home/peko/autobuild/instance-1/output-1/target/usr/share/info
rm -rf /home/peko/autobuild/instance-1/output-1/target/usr/doc /home/peko/autobuild/instance-1/output-1/target/usr/share/doc
rm -rf /home/peko/autobuild/instance-1/output-1/target/usr/share/gtk-doc
rmdir /home/peko/autobuild/instance-1/output-1/target/usr/share 2>/dev/null || true
rm -rf /home/peko/autobuild/instance-1/output-1/target/lib/debug /home/peko/autobuild/instance-1/output-1/target/usr/lib/debug
find /home/peko/autobuild/instance-1/output-1/target   -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/peko/autobuild/instance-1/output-1/host/bin/arm-none-linux-gnueabi-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true
find /home/peko/autobuild/instance-1/output-1/target   \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/peko/autobuild/instance-1/output-1/host/bin/arm-none-linux-gnueabi-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true
test -f /home/peko/autobuild/instance-1/output-1/target/etc/ld.so.conf && \
	{ echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
test -d /home/peko/autobuild/instance-1/output-1/target/etc/ld.so.conf.d && \
	{ echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true
mkdir -p /home/peko/autobuild/instance-1/output-1/target/etc
( \
	echo "NAME=Buildroot"; \
	echo "VERSION=2020.05-1121-gcbcab766dc"; \
	echo "ID=buildroot"; \
	echo "VERSION_ID=2020.08-rc1"; \
	echo "PRETTY_NAME=\"Buildroot 2020.08-rc1\"" \
) >  /home/peko/autobuild/instance-1/output-1/target/usr/lib/os-release
ln -sf ../usr/lib/os-release /home/peko/autobuild/instance-1/output-1/target/etc
>>>   Sanitizing RPATH in target tree
PER_PACKAGE_DIR=/home/peko/autobuild/instance-1/output-1/per-package /home/peko/autobuild/instance-1/buildroot/support/scripts/fix-rpath target
cat /home/peko/autobuild/instance-1/output-1/build/busybox-1.31.1/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/bzip2-1.0.8/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-autoconf-2.69/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-automake-1.15.1/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-bison-3.6.4/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-erofs-utils-1.1/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-flex-2.6.4/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-gettext-tiny-0.3.2/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-gettext/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-libtool-2.4.6/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-libzlib-1.2.11/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-lz4-1.9.2/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-m4-1.4.18/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-patchelf-0.9/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-pkgconf-1.6.1/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-skeleton/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-tar-1.29/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-util-linux-2.35.2/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/host-zlib/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/initscripts/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/libcdio-2.1.0/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/libgta-1.0.8/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/libzlib-1.2.11/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/ptpd-1.1.0/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/qhull-7.3.2/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/radvd-2.18/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/rs485conf-5c8d00cf70950fab3454549b81dea843d844492a/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/skeleton-init-common/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/skeleton-init-sysv/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/skeleton/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/toolchain-external-codesourcery-arm-2014.05-29/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/toolchain-external/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/toolchain/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/tslib-1.22/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/xz-5.2.5/.files-list.txt /home/peko/autobuild/instance-1/output-1/build/zlib/.files-list.txt > /home/peko/autobuild/instance-1/output-1/build/packages-file-list.txt
cat /home/peko/autobuild/instance-1/output-1/build/busybox-1.31.1/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/bzip2-1.0.8/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-autoconf-2.69/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-automake-1.15.1/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-bison-3.6.4/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-erofs-utils-1.1/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-flex-2.6.4/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-gettext-tiny-0.3.2/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-gettext/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-libtool-2.4.6/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-libzlib-1.2.11/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-lz4-1.9.2/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-m4-1.4.18/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-patchelf-0.9/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-pkgconf-1.6.1/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-skeleton/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-tar-1.29/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-util-linux-2.35.2/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/host-zlib/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/initscripts/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/libcdio-2.1.0/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/libgta-1.0.8/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/libzlib-1.2.11/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/ptpd-1.1.0/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/qhull-7.3.2/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/radvd-2.18/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/rs485conf-5c8d00cf70950fab3454549b81dea843d844492a/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/skeleton-init-common/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/skeleton-init-sysv/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/skeleton/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/toolchain-external-codesourcery-arm-2014.05-29/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/toolchain-external/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/toolchain/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/tslib-1.22/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/xz-5.2.5/.files-list-host.txt /home/peko/autobuild/instance-1/output-1/build/zlib/.files-list-host.txt > /home/peko/autobuild/instance-1/output-1/build/packages-file-list-host.txt
cat /home/peko/autobuild/instance-1/output-1/build/busybox-1.31.1/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/bzip2-1.0.8/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-autoconf-2.69/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-automake-1.15.1/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-bison-3.6.4/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-erofs-utils-1.1/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-flex-2.6.4/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-gettext-tiny-0.3.2/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-gettext/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-libtool-2.4.6/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-libzlib-1.2.11/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-lz4-1.9.2/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-m4-1.4.18/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-patchelf-0.9/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-pkgconf-1.6.1/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-skeleton/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-tar-1.29/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-util-linux-2.35.2/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/host-zlib/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/initscripts/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/libcdio-2.1.0/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/libgta-1.0.8/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/libzlib-1.2.11/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/ptpd-1.1.0/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/qhull-7.3.2/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/radvd-2.18/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/rs485conf-5c8d00cf70950fab3454549b81dea843d844492a/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/skeleton-init-common/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/skeleton-init-sysv/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/skeleton/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/toolchain-external-codesourcery-arm-2014.05-29/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/toolchain-external/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/toolchain/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/tslib-1.22/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/xz-5.2.5/.files-list-staging.txt /home/peko/autobuild/instance-1/output-1/build/zlib/.files-list-staging.txt > /home/peko/autobuild/instance-1/output-1/build/packages-file-list-staging.txt
touch /home/peko/autobuild/instance-1/output-1/target/usr
ln -snf /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot /home/peko/autobuild/instance-1/output-1/staging
make: Leaving directory '/home/peko/autobuild/instance-1/buildroot'
make: Entering directory '/home/peko/autobuild/instance-1/buildroot'
>>>   Buildroot 2020.05-1121-gcbcab766dc Collecting legal info
COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4)
>>> toolchain-external  Collecting legal info
>>> host-skeleton  Collecting legal info
>>> host-tar 1.29 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> skeleton  Collecting legal info
>>> skeleton-init-sysv  Collecting legal info
>>> skeleton-init-common  Collecting legal info
arm-2014.05-29-arm-none-linux-gnueabi.src.tar.bz2: OK (sha256: e16a5b1e41d7ff1e74161f9405182001bc8d1360d89564e73911032e6966cc0d)
>>> toolchain-external-codesourcery-arm 2014.05-29 Collecting legal info
>>> toolchain  Collecting legal info
>>> busybox 1.31.1 Collecting legal info
LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548)
>>> bzip2 1.0.8 Collecting legal info
LICENSE: OK (sha256: c6dbbf828498be844a89eaa3b84adbab3199e342eb5cb2ed2f0d4ba7ec0f38a3)
>>> host-erofs-utils 1.1 Collecting legal info
COPYING: OK (sha256: feee3b3157dcdf78d4f50edefbd5dd7adf8b6d52c11bfaaa746a85a373256713)
>>> host-autoconf 2.69 Collecting legal info
COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2)
>>> host-libtool 2.4.6 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-m4 1.4.18 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-automake 1.15.1 Collecting legal info
COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6)
>>> host-lz4 1.9.2 Collecting legal info
lib/LICENSE: OK (sha256: d15d99c8dc6b0ec22174c0e563a95bc40f9363ca7f9d9d793bb5c5a8e8d0af71)
programs/COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> host-pkgconf 1.6.1 Collecting legal info
COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04)
>>> host-util-linux 2.35.2 Collecting legal info
README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955)
Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d)
Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8)
Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63)
Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-zlib  Collecting legal info
>>> host-libzlib 1.2.11 Collecting legal info
README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15)
>>> initscripts  Collecting legal info
>>> libcdio 2.1.0 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> libgta 1.0.8 Collecting legal info
COPYING: OK (sha256: 36b6d3fa47916943fd5fec313c584784946047ec1337a78b440e5992cb595f89)
>>> xz 5.2.5 Collecting legal info
COPYING: OK (sha256: bcb02973ef6e87ea73d331b3a80df7748407f17efdb784b61b47e0e610d3bb5c)
COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
COPYING.GPLv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> zlib  Collecting legal info
>>> libzlib 1.2.11 Collecting legal info
README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15)
>>> host-patchelf 0.9 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> ptpd 1.1.0 Collecting legal info
COPYRIGHT: OK (sha256: be69f30947abef91e0bce161005fe56b116b770e459e3e6980279349de47c366)
>>> qhull 7.3.2 Collecting legal info
COPYING.txt: OK (sha256: 34db0c0c4f931861d720555c9cd7a2e228d1290ba29af0f2ee80c41bb2038afb)
>>> radvd 2.18 Collecting legal info
COPYRIGHT: OK (sha256: 40a6db00cf0b97f031eaa6c6e87157788f40ced1b88e3ea6d78779bd2a39dc80)
>>> host-bison 3.6.4 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-flex 2.6.4 Collecting legal info
COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273)
>>> host-gettext  Collecting legal info
>>> host-gettext-tiny 0.3.2 Collecting legal info
LICENSE: OK (sha256: 4c938aa3d8fa3c184bba5e87a8a2febc89560627c9d0567536879e3eca1a7b4f)
extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b)
>>> rs485conf 5c8d00cf70950fab3454549b81dea843d844492a Collecting legal info
LICENSE: OK (sha256: 3e5c80d50879a9572ac9e463215a942490a67b56dfd8a3e27004d7c62e0493c8)
>>> tslib 1.22 Collecting legal info
COPYING: OK (sha256: 9b872a8a070b8ad329c4bd380fb1bf0000f564c75023ec8e1e6803f15364b9e9)
WARNING: the Buildroot source code has not been saved
WARNING: toolchain-external-codesourcery-arm-2014.05-29: cannot save license (TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM_LICENSE_FILES not defined)
Legal info produced in /home/peko/autobuild/instance-1/output-1/legal-info
make: Leaving directory '/home/peko/autobuild/instance-1/buildroot'