libtoolize: copying file 'config/lt~obsolete.m4' configure.ac:46: installing 'config/compile' configure.ac:49: installing 'config/config.guess' configure.ac:49: installing 'config/config.sub' configure.ac:15: installing 'config/install-sh' configure.ac:15: installing 'config/missing' Makefile.am: installing 'config/depcomp' parallel-tests: installing 'config/test-driver' >>> zyre 2.0.0 Patching libtool patching file /home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/config/ltmain.sh Hunk #1 succeeded at 2694 (offset 7 lines). Hunk #2 succeeded at 4284 (offset 7 lines). Hunk #3 succeeded at 6579 (offset 25 lines). Hunk #4 succeeded at 6589 (offset 25 lines). Hunk #5 succeeded at 6882 (offset 25 lines). Hunk #6 succeeded at 7174 (offset 25 lines). Hunk #7 succeeded at 8140 (offset 28 lines). Hunk #8 succeeded at 10769 (offset 59 lines). (cd /home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/ && rm -rf config.cache && PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" AR="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ar" AS="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-as" LD="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ld" NM="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-nm" CC="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc" GCC="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc" CPP="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-cpp" CXX="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-g++" FC="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gfortran" F77="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gfortran" RANLIB="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ranlib" READELF="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-readelf" STRIP="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-strip" OBJCOPY="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-objcopy" OBJDUMP="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/instance-0/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-0/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-0/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-0/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-as" DEFAULT_LINKER="/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/buildroot/autobuild/instance-0/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no gt_cv_func_gnugettext1_libc=yes gt_cv_func_gnugettext2_libc=yes CONFIG_SITE=/dev/null ./configure --target=arm-buildroot-linux-musleabihf --host=arm-buildroot-linux-musleabihf --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared --without-docs ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-buildroot-linux-musleabihf-strip... /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether UID '1001' is supported by ustar format... yes checking whether GID '1001' is supported by ustar format... yes checking how to create a ustar tar archive... gnutar checking whether make supports nested variables... (cached) yes checking for arm-buildroot-linux-musleabihf-gcc... /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc accepts -g... yes checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc option to accept ISO C89... none needed checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc... none checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc option to accept ISO C99... none needed checking build system type... x86_64-pc-linux-gnu checking host system type... arm-buildroot-linux-musleabihf checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc... /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ld checking if the linker (/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-nm checking the name lister (/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to arm-buildroot-linux-musleabihf format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ld option to reload object files... -r checking for arm-buildroot-linux-musleabihf-objdump... /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-objdump checking how to recognize dependent libraries... pass_all checking for arm-buildroot-linux-musleabihf-dlltool... dlltool checking how to associate runtime and link libraries... printf %s\n checking for arm-buildroot-linux-musleabihf-ar... /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ar checking for archiver @FILE support... @ checking for arm-buildroot-linux-musleabihf-strip... (cached) /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-strip checking for arm-buildroot-linux-musleabihf-ranlib... /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ranlib checking command to parse /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-nm output from /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for arm-buildroot-linux-musleabihf-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking how to run the C preprocessor... /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-cpp checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc supports -fno-rtti -fno-exceptions... no checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc option to produce PIC... -fPIC -DPIC checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc PIC flag -fPIC -DPIC works... yes checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc static flag -static works... yes checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc supports -c -o file.o... yes checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc supports -c -o file.o... (cached) yes checking whether the /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc linker (/home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for a sed that does not truncate output... (cached) /bin/sed checking for gawk... (cached) gawk checking pkg-config is at least version 0.9.0... yes checking for libzmq... yes checking for czmq... yes checking whether to build documentation... no checking whether to install manpages... no checking for ANSI C header files... (cached) yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking netinet/tcp.h usability... yes checking netinet/tcp.h presence... yes checking for netinet/tcp.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking ifaddrs.h usability... yes checking ifaddrs.h presence... yes checking for ifaddrs.h... yes checking for net/if.h... yes checking for net/if_media.h... no checking for linux/wireless.h... yes checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for size_t... yes checking for ssize_t... yes checking whether time.h and sys/time.h may both be included... yes checking for uint32_t... yes checking for working volatile... yes checking whether byte ordering is bigendian... (cached) no checking for presence of CMake recipes... no configure: ENABLE_PERF_LOCAL defined configure: ENABLE_PERF_REMOTE defined configure: ENABLE_ZPINGER defined configure: ENABLE_ZTESTER_BEACON defined configure: ENABLE_ZTESTER_GOSSIP defined configure: ENABLE_ZYRE_SELFTEST defined checking return type of signal handlers... void checking for perror... yes checking for gettimeofday... yes checking for memset... no checking for getifaddrs... yes configure: Building stable and legacy API + draft API checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating src/libzyre.pc config.status: creating src/platform.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls ########################################################################## # SUMMARY # ########################################################################## Package version............... : zyre-2.0.0 C compiler.................... : /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc C compiler flags.............. : -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os C++ compiler.................. : /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-g++ C++ compiler flags............ : -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os Configure date................ : 2020-08-22 04:45 Build architecture............ : arm-buildroot-linux-musleabihf Build docs.................... : no Build host.................... : gcc159.bak.milne.osuosl.org Build user.................... : buildroot Draft API..................... : yes Install dir................... : /usr Install man pages............. : no Help: Use the Draft API (default = yes): --enable-drafts=(yes|no) Build the docs and install the man pages (default = yes): --with-docs=(yes|no) *requires asciidoc and xmlto ########################################################################## Configure complete! Now proceed with: - 'make' compile the project - 'make check' run the project's selftest - 'make install' install the project to /usr Further options are: - 'make callcheck' run the project's selftest with valgrind to check for performance leaks - 'make check-verbose' run the project's selftest in verbose mode - 'make code' generate code from models in src directory (requires zproject and zproto) - 'make debug' run the project's selftest under gdb - 'make memcheck' run the project's selftest with valgrind to check for memory leaks - 'make coverage' generate project's selftest coverage report expects --with-gcov option for configure >>> zyre 2.0.0 Building PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/ make[1]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0' Making all in doc make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc' SKIPPING documentation generation and formatting (BUILD_DOC was not required and/or tools are missing) make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc' make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0' CC src/src_libzyre_la-zyre.lo CC src/src_libzyre_la-zyre_event.lo CC src/src_libzyre_la-zre_msg.lo CC src/src_libzyre_la-zyre_peer.lo CC src/src_libzyre_la-zyre_group.lo CC src/src_libzyre_la-zyre_node.lo CC src/src_libzyre_la-zyre_private_selftest.lo CC src/src_zpinger-zpinger.o CC src/src_perf_local-perf_local.o CC src/src_perf_remote-perf_remote.o CC src/src_ztester_beacon-ztester_beacon.o CC src/src_ztester_gossip-ztester_gossip.o CC src/src_zyre_selftest-zyre_selftest.o CCLD src/libzyre.la libtool: warning: '/home/buildroot/autobuild/instance-0/output-1/host/bin/../arm-buildroot-linux-musleabihf/sysroot/usr/lib/libzmq.la' seems to be moved libtool: warning: '/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/arm-buildroot-linux-musleabihf/9.3.0/../../../../arm-buildroot-linux-musleabihf/lib/libstdc++.la' seems to be moved libtool: warning: '/home/buildroot/autobuild/instance-0/output-1/host/bin/../arm-buildroot-linux-musleabihf/sysroot/usr/lib/libuuid.la' seems to be moved libtool: warning: '/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/arm-buildroot-linux-musleabihf/9.3.0/../../../../arm-buildroot-linux-musleabihf/lib/libstdc++.la' seems to be moved CCLD src/zpinger CCLD src/perf_local CCLD src/perf_remote CCLD src/ztester_beacon CCLD src/ztester_gossip CCLD src/zyre_selftest make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0' make[1]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0' >>> zyre 2.0.0 Installing to staging directory PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot install -C /home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/ make[1]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0' Making install in doc make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc' SKIPPING documentation generation and formatting (BUILD_DOC was not required and/or tools are missing) make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc' make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/share/zproject/zyre' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/include' /bin/bash ./libtool --mode=install /usr/bin/install -c src/libzyre.la '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib/pkgconfig' /usr/bin/install -c -m 644 api/zyre.api api/zyre_event.api '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/share/zproject/zyre' /usr/bin/install -c -m 644 include/zyre.h include/zyre_event.h include/zyre_library.h '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/include' /usr/bin/install -c -m 644 src/libzyre.pc '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib/pkgconfig' libtool: install: /usr/bin/install -c src/.libs/libzyre.so.2.0.0 /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib/libzyre.so.2.0.0 libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib && { ln -s -f libzyre.so.2.0.0 libzyre.so.2 || { rm -f libzyre.so.2 && ln -s libzyre.so.2.0.0 libzyre.so.2; }; }) libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib && { ln -s -f libzyre.so.2.0.0 libzyre.so || { rm -f libzyre.so && ln -s libzyre.so.2.0.0 libzyre.so; }; }) libtool: install: /usr/bin/install -c src/.libs/libzyre.lai /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib/libzyre.la libtool: warning: remember to run 'libtool --finish /usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/bin' /bin/bash ./libtool --mode=install /usr/bin/install -c src/zpinger '/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/bin' libtool: install: /usr/bin/install -c src/zpinger /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/bin/zpinger make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0' make[1]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0' >>> zyre 2.0.0 Fixing libtool files for la in $(find /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/autobuild/instance-0/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot:@STAGING_DIR@:g" \ \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ \ -e "s:@STAGING_DIR@:/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/autobuild/instance-0/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> zyre 2.0.0 Installing to target PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-0/output-1/target install -C /home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/ make[1]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0' Making install in doc make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc' SKIPPING documentation generation and formatting (BUILD_DOC was not required and/or tools are missing) make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/doc' make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/share/zproject/zyre' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/include' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib/pkgconfig' /bin/bash ./libtool --mode=install /usr/bin/install -c src/libzyre.la '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib' /usr/bin/install -c -m 644 include/zyre.h include/zyre_event.h include/zyre_library.h '/home/buildroot/autobuild/instance-0/output-1/target/usr/include' /usr/bin/install -c -m 644 src/libzyre.pc '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib/pkgconfig' /usr/bin/install -c -m 644 api/zyre.api api/zyre_event.api '/home/buildroot/autobuild/instance-0/output-1/target/usr/share/zproject/zyre' libtool: install: /usr/bin/install -c src/.libs/libzyre.so.2.0.0 /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/libzyre.so.2.0.0 libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/target/usr/lib && { ln -s -f libzyre.so.2.0.0 libzyre.so.2 || { rm -f libzyre.so.2 && ln -s libzyre.so.2.0.0 libzyre.so.2; }; }) libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/target/usr/lib && { ln -s -f libzyre.so.2.0.0 libzyre.so || { rm -f libzyre.so && ln -s libzyre.so.2.0.0 libzyre.so; }; }) libtool: install: /usr/bin/install -c src/.libs/libzyre.lai /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/libzyre.la libtool: warning: remember to run 'libtool --finish /usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/bin' /bin/bash ./libtool --mode=install /usr/bin/install -c src/zpinger '/home/buildroot/autobuild/instance-0/output-1/target/usr/bin' libtool: install: /usr/bin/install -c src/zpinger /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/zpinger make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0' make[1]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0' >>> Finalizing host directory >>> Finalizing target directory /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/buildroot/autobuild/instance-0/output-1/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/autobuild/instance-0/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /home/buildroot/autobuild/instance-0/output-1/build/busybox-1.31.1/.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/instance-0/output-1/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/instance-0/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/buildroot/autobuild/instance-0/output-1/build/busybox-1.31.1/.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/instance-0/output-1/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/instance-0/output-1/target/etc/shells; fi mkdir -p /home/buildroot/autobuild/instance-0/output-1/target/etc echo "buildroot" > /home/buildroot/autobuild/instance-0/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/instance-0/output-1/target/etc/hosts mkdir -p /home/buildroot/autobuild/instance-0/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/instance-0/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/instance-0/output-1/target/etc/shadow rm -f /home/buildroot/autobuild/instance-0/output-1/target/bin/sh if [ -x /home/buildroot/autobuild/instance-0/output-1/target/sbin/swapon -a -x /home/buildroot/autobuild/instance-0/output-1/target/sbin/swapoff ]; then /bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/buildroot/autobuild/instance-0/output-1/target/etc/inittab; else /bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/buildroot/autobuild/instance-0/output-1/target/etc/inittab; fi printf '%s\n' C en_US locale-archive > /home/buildroot/autobuild/instance-0/output-1/build/locales.nopurge for dir in /home/buildroot/autobuild/instance-0/output-1/target/usr/share/locale /home/buildroot/autobuild/instance-0/output-1/target/usr/share/X11/locale /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/instance-0/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/autobuild/instance-0/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/instance-0/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/instance-0/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/include /home/buildroot/autobuild/instance-0/output-1/target/usr/share/aclocal \ /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/pkgconfig /home/buildroot/autobuild/instance-0/output-1/target/usr/share/pkgconfig \ /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/cmake /home/buildroot/autobuild/instance-0/output-1/target/usr/share/cmake \ /home/buildroot/autobuild/instance-0/output-1/target/usr/doc find /home/buildroot/autobuild/instance-0/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/instance-0/output-1/target/lib/ /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/ /home/buildroot/autobuild/instance-0/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f find: '/home/buildroot/autobuild/instance-0/output-1/target/usr/libexec/': No such file or directory rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/share/gdb rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/share/bash-completion rm -rf /home/buildroot/autobuild/instance-0/output-1/target/etc/bash_completion.d rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/share/zsh rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/man /home/buildroot/autobuild/instance-0/output-1/target/usr/share/man rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/info /home/buildroot/autobuild/instance-0/output-1/target/usr/share/info rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/doc /home/buildroot/autobuild/instance-0/output-1/target/usr/share/doc rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/instance-0/output-1/target/usr/share 2>/dev/null || true rm -rf /home/buildroot/autobuild/instance-0/output-1/target/lib/debug /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/debug find /home/buildroot/autobuild/instance-0/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/buildroot/autobuild/instance-0/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/buildroot/autobuild/instance-0/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/instance-0/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/instance-0/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2019.05-7182-g09e5e3dbdd"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2020.08-rc1"; \ echo "PRETTY_NAME=\"Buildroot 2020.08-rc1\"" \ ) > /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/instance-0/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/buildroot/autobuild/instance-0/output-1/per-package /home/buildroot/autobuild/instance-0/buildroot/support/scripts/fix-rpath target cat /home/buildroot/autobuild/instance-0/output-1/build/busybox-1.31.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/czmq-4.2.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/dropbear-2020.80/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/glm-0.9.9.5/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-autoconf-2.69/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-automake-1.15.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-binutils-2.33.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-cmake-3.15.5/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gcc-final-9.3.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gcc-initial-9.3.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gettext-tiny-0.3.2/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gettext/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gmp-6.1.2/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-libtool-2.4.6/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-m4-1.4.18/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-mpc-1.1.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-mpfr-4.0.2/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-ncurses-6.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-patchelf-0.9/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-pkgconf-1.6.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/host-skeleton/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/initscripts/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libebml-1.4.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libmatroska-1.6.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libopenssl-1.1.1g/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libqrencode-4.0.2/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libtomcrypt-1.18.2/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libtommath-1.2.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libupnp-1.6.25/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/liburiparser-0.9.4/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libzlib-1.2.11/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/linux-headers-5.7.10/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/musl-1.2.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/musl-compat-headers/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/mutt-1.14.4/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/ncurses-6.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/openssl/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/popt-1.16/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/rsync-3.1.3/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton-init-common/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton-init-sysv/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain-buildroot/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/tpm2-totp-0.2.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/tpm2-tss-2.3.3/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/util-linux-2.35.2/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/zeromq-4.3.2/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/zlib/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/.files-list.txt > /home/buildroot/autobuild/instance-0/output-1/build/packages-file-list.txt cat /home/buildroot/autobuild/instance-0/output-1/build/busybox-1.31.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/czmq-4.2.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/dropbear-2020.80/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/glm-0.9.9.5/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-autoconf-2.69/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-automake-1.15.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-binutils-2.33.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-cmake-3.15.5/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gcc-final-9.3.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gcc-initial-9.3.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gettext-tiny-0.3.2/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gettext/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gmp-6.1.2/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-libtool-2.4.6/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-m4-1.4.18/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-mpc-1.1.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-mpfr-4.0.2/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-ncurses-6.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-patchelf-0.9/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-pkgconf-1.6.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-skeleton/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/initscripts/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/libebml-1.4.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/libmatroska-1.6.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/libopenssl-1.1.1g/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/libqrencode-4.0.2/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/libtomcrypt-1.18.2/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/libtommath-1.2.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/libupnp-1.6.25/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/liburiparser-0.9.4/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/libzlib-1.2.11/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/linux-headers-5.7.10/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/musl-1.2.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/musl-compat-headers/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/mutt-1.14.4/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/ncurses-6.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/openssl/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/popt-1.16/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/rsync-3.1.3/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton-init-common/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton-init-sysv/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain-buildroot/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/tpm2-totp-0.2.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/tpm2-tss-2.3.3/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/util-linux-2.35.2/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/zeromq-4.3.2/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/zlib/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/.files-list-host.txt > /home/buildroot/autobuild/instance-0/output-1/build/packages-file-list-host.txt cat /home/buildroot/autobuild/instance-0/output-1/build/busybox-1.31.1/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/czmq-4.2.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/dropbear-2020.80/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/glm-0.9.9.5/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-autoconf-2.69/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-automake-1.15.1/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-binutils-2.33.1/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-cmake-3.15.5/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gcc-final-9.3.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gcc-initial-9.3.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gettext-tiny-0.3.2/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gettext/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gmp-6.1.2/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-libtool-2.4.6/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-m4-1.4.18/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-mpc-1.1.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-mpfr-4.0.2/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-ncurses-6.1/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-patchelf-0.9/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-pkgconf-1.6.1/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/host-skeleton/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/initscripts/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libebml-1.4.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libmatroska-1.6.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libopenssl-1.1.1g/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libqrencode-4.0.2/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libtomcrypt-1.18.2/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libtommath-1.2.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libupnp-1.6.25/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/liburiparser-0.9.4/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libzlib-1.2.11/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/linux-headers-5.7.10/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/musl-1.2.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/musl-compat-headers/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/mutt-1.14.4/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/ncurses-6.1/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/openssl/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/popt-1.16/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/rsync-3.1.3/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton-init-common/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton-init-sysv/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain-buildroot/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/tpm2-totp-0.2.1/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/tpm2-tss-2.3.3/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/util-linux-2.35.2/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/zeromq-4.3.2/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/zlib/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/zyre-2.0.0/.files-list-staging.txt > /home/buildroot/autobuild/instance-0/output-1/build/packages-file-list-staging.txt touch /home/buildroot/autobuild/instance-0/output-1/target/usr ln -snf /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot /home/buildroot/autobuild/instance-0/output-1/staging make: Leaving directory '/home/buildroot/autobuild/instance-0/buildroot' make: Entering directory '/home/buildroot/autobuild/instance-0/buildroot' >>> Buildroot 2019.05-7182-g09e5e3dbdd Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-buildroot Collecting legal info >>> host-gcc-final 9.3.0 Collecting legal info >>> host-binutils 2.33.1 Collecting legal info COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: 56bdea73b6145ef6ac5259b3da390b981d840c24cb03b8e1cbc678de7ecfa18d) >>> host-skeleton Collecting legal info >>> host-gmp 6.1.2 Collecting legal info COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-mpc 1.1.0 Collecting legal info COPYING.LESSER: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) >>> host-mpfr 4.0.2 Collecting legal info COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118) >>> musl 1.2.0 Collecting legal info COPYRIGHT: OK (sha256: afe1df384787fce3577f3356b8b0d417381483f7c704eacb63f8050349fac77a) >>> host-gcc-initial 9.3.0 Collecting legal info >>> linux-headers 5.7.10 Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> musl-compat-headers Collecting legal info >>> toolchain Collecting legal info >>> busybox 1.31.1 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) >>> util-linux 2.35.2 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-pkgconf 1.6.1 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> ncurses 6.1 Collecting legal info COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87) >>> host-ncurses 6.1 Collecting legal info COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87) >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> czmq 4.2.0 Collecting legal info LICENSE: OK (sha256: 1f256ecad192880510e84ad60474eab7589218784b9a50bc7ceee34c2b91f1d5) >>> zeromq 4.3.2 Collecting legal info COPYING: OK (sha256: 4fd86507c9b486764343065a9e035222869a27b5789efeb4fd93edc85412d7a3) COPYING.LESSER: OK (sha256: 83f32abe61ee58ffb1b007412c08415168c052501dbf56d7a47aaaac52b03ef6) >>> host-autoconf 2.69 Collecting legal info COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> dropbear 2020.80 Collecting legal info LICENSE: OK (sha256: a99ce657d790b761c132ee7e0de18edb437ae6361e536d991c6a12f36e770445) >>> libtomcrypt 1.18.2 Collecting legal info LICENSE: OK (sha256: 8f196cb13afd271f5e267fd29543fc454596382ad580e7592709492843996ac8) >>> libtommath 1.2.0 Collecting legal info LICENSE: OK (sha256: 2fa64b163659f41965c9815882a8296d3d03ff546b76153e11445f9bdecf955a) >>> glm 0.9.9.5 Collecting legal info manual.md: OK (sha256: 337130631a714eeae017556cad101d5324c2961214120b6214741d3d43667086) >>> host-cmake 3.15.5 Collecting legal info Copyright.txt: OK (sha256: dc628fb936a5d229296d42083f9a8218aa32204c016919e784404c9ec58776e9) >>> initscripts Collecting legal info >>> libebml 1.4.0 Collecting legal info LICENSE.LGPL: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libmatroska 1.6.0 Collecting legal info LICENSE.LGPL: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libopenssl 1.1.1g Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> libqrencode 4.0.2 Collecting legal info COPYING: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) >>> libupnp 1.6.25 Collecting legal info LICENSE: OK (sha256: 0375955c8a79d6e8fa0792d45d00fc4e7710d7ac95bcbd27f9225a83f5c946fd) >>> liburiparser 0.9.4 Collecting legal info COPYING: OK (sha256: 287f09e6546a9610f949f89e8fb937cacfeabd7bfaa8c8a0c18312193bf04ad3) >>> mutt 1.14.4 Collecting legal info GPL: OK (sha256: 732f24b69a6c71cd8e01e4672bb8e12cc1cbb88a50a4665e6ca4fd95000a57ee) >>> openssl Collecting legal info >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> popt 1.16 Collecting legal info COPYING: OK (sha256: 518d4f2a05064cb9a8ec0ea02e86408af4feed6916f78ef42171465db8b383c5) >>> host-gettext Collecting legal info >>> host-gettext-tiny 0.3.2 Collecting legal info LICENSE: OK (sha256: 4c938aa3d8fa3c184bba5e87a8a2febc89560627c9d0567536879e3eca1a7b4f) extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> rsync 3.1.3 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> tpm2-totp 0.2.1 Collecting legal info LICENSE: OK (sha256: 67bc21a0bff2b0890307cfaa883bd3f5337f461eb6d8a612a015cea6d704e9ed) >>> tpm2-tss 2.3.3 Collecting legal info LICENSE: OK (sha256: 18c1bf4b1ba1fb2c4ffa7398c234d83c0d55475298e470ae1e5e3a8a8bd2e448) >>> zyre 2.0.0 Collecting legal info LICENSE: OK (sha256: 1f256ecad192880510e84ad60474eab7589218784b9a50bc7ceee34c2b91f1d5) WARNING: the Buildroot source code has not been saved WARNING: gcc-final-9.3.0: cannot save license (HOST_GCC_FINAL_LICENSE_FILES not defined) WARNING: gcc-initial-9.3.0: cannot save license (HOST_GCC_INITIAL_LICENSE_FILES not defined) WARNING: linux-headers-5.7.10: cannot save license (LINUX_HEADERS_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/instance-0/output-1/legal-info make: Leaving directory '/home/buildroot/autobuild/instance-0/buildroot'