- C++ compiler warnings........... -Wall -Wextra - Linker flags.................... Detected libraries (required): - glib-2.0 >= 2.32.0.............. 2.56.1 - libzip >= 0.10.................. 1.5.1 Detected libraries (optional): - libserialport >= 0.1.1.......... no - libftdi1 >= 1.0................. no - libusb-1.0 >= 1.0.16............ no - librevisa >= 0.0.20130412....... no - libgpib......................... no - libieee1284..................... no - check >= 0.9.4.................. no - glibmm-2.4 >= 2.32.0............ no - python = 2.7.................... no - python2 = 2.7................... no - python27 = 2.7.................. no - python-2.7 = 2.7................ no - pygobject-3.0 >= 3.0.0.......... no - ruby............................ no - ruby-........................... no Enabled hardware drivers: - agilent-dmm..................... no (missing: libserialport) - appa-55ii....................... no (missing: libserialport) - arachnid-labs-re-load-pro....... no (missing: libserialport) - asix-sigma...................... no (missing: libftdi) - atten-pps3xxx................... no (missing: libserialport) - baylibre-acme................... yes - beaglelogic..................... yes - brymen-bm86x.................... no (missing: libusb) - brymen-dmm...................... no (missing: libserialport) - cem-dt-885x..................... no (missing: libserialport) - center-3xx...................... no (missing: libserialport) - chronovu-la..................... no (missing: libusb, libftdi) - colead-slm...................... no (missing: libserialport) - conrad-digi-35-cpu.............. no (missing: libserialport) - demo............................ yes - dreamsourcelab-dslogic.......... no (missing: libusb) - fluke-45........................ yes - fluke-dmm....................... no (missing: libserialport) - ftdi-la......................... no (missing: libusb, libftdi) - fx2lafw......................... no (missing: libusb) - gmc-mh-1x-2x.................... no (missing: libserialport) - gwinstek-gds-800................ no (missing: libserialport) - gwinstek-gpd.................... no (missing: libserialport) - hameg-hmo....................... no (missing: libserialport) - hantek-4032l.................... no (missing: libusb) - hantek-6xxx..................... no (missing: libusb) - hantek-dso...................... no (missing: libusb) - hp-3457a........................ yes - hp-3478a........................ no (missing: libgpib) - hung-chang-dso-2100............. no (missing: libieee1284) - ikalogic-scanalogic2............ no (missing: libusb) - ikalogic-scanaplus.............. no (missing: libftdi) - ipdbg-la........................ yes - kecheng-kc-330b................. no (missing: libusb) - kern-scale...................... no (missing: libserialport) - korad-kaxxxxp................... no (missing: libserialport) - lascar-el-usb................... no (missing: libusb) - lecroy-logicstudio.............. no (missing: libusb) - lecroy-xstream.................. yes - manson-hcs-3xxx................. no (missing: libserialport) - maynuo-m97...................... yes - mic-985xx....................... no (missing: libserialport) - motech-lps-30x.................. no (missing: libserialport) - norma-dmm....................... no (missing: libserialport) - openbench-logic-sniffer......... no (missing: libserialport) - pce-322a........................ no (missing: libserialport) - pipistrello-ols................. no (missing: libftdi) - rdtech-dps...................... no (missing: libserialport) - rigol-ds........................ yes - rohde-schwarz-sme-0x............ no (missing: libserialport) - saleae-logic16.................. no (missing: libusb) - saleae-logic-pro................ no (missing: libusb) - scpi-pps........................ yes - serial-dmm...................... no (missing: libserialport) - serial-lcr...................... no (missing: libserialport) - siglent-sds..................... yes - sysclk-lwla..................... no (missing: libusb) - teleinfo........................ no (missing: libserialport) - testo........................... no (missing: libusb) - tondaj-sl-814................... no (missing: libserialport) - uni-t-dmm....................... no (missing: libusb) - uni-t-ut32x..................... no (missing: libusb) - victor-dmm...................... no (missing: libusb) - yokogawa-dlm.................... yes - zeroplus-logic-cube............. no (missing: libusb) - zketech-ebd-usb................. no (missing: libserialport) Enabled SCPI backends: - TCP............................. yes - RPC............................. yes - serial.......................... no - VISA............................ no - GPIB............................ no - USBTMC.......................... no Enabled language bindings: - C++............................. no (disabled) - Python.......................... no (disabled) - Ruby............................ no (missing: C++ bindings, Ruby, Headers, SWIG >= 3.0.8) - Java............................ no (disabled) =============================================================================== WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING =============================================================================== === === === The libsigrok C++ bindings are not being built since you === === are missing one or more dependencies (see above)! === === === === This means you won't be able to compile frontends that require === === the C++ bindings (such as PulseView)! You also won't be able to build === === other bindings and frontends using those (such as sigrok-meter)! === === === =============================================================================== WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING =============================================================================== >>> libsigrok 0.5.1 Building PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j8 -C /home/peko/autobuild/instance-0/output/build/libsigrok-0.5.1/ /usr/bin/make all-am CC src/drivers.lo CC src/driver_list_start.lo CC src/driver_list_stop.lo CC src/backend.lo CC src/conversion.lo CC src/device.lo CC src/session.lo CC src/session_file.lo CC src/session_driver.lo CC src/hwdriver.lo CC src/trigger.lo CC src/soft-trigger.lo CC src/analog.lo CC src/fallback.lo CC src/resource.lo CC src/strutil.lo CC src/log.lo CC src/version.lo CC src/error.lo CC src/std.lo CC src/sw_limits.lo CC src/input/input.lo CC src/input/binary.lo CC src/input/chronovu_la8.lo CC src/input/csv.lo CC src/input/logicport.lo CC src/input/raw_analog.lo CC src/input/trace32_ad.lo CC src/input/vcd.lo CC src/input/wav.lo CC src/input/null.lo CC src/output/output.lo src/input/csv.c: In function 'receive': src/input/csv.c:569:10: warning: 'line' may be used uninitialized in this function [-Wmaybe-uninitialized] columns = parse_line(line, inc, -1); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ src/input/csv.c:531:17: note: 'line' was declared here char **lines, *line, **columns, *column; ^~~~ CC src/output/analog.lo CC src/output/ascii.lo CC src/output/bits.lo CC src/output/binary.lo CC src/output/csv.lo CC src/output/chronovu_la8.lo CC src/output/wav.lo CC src/output/hex.lo CC src/output/ols.lo CC src/output/srzip.lo CC src/output/vcd.lo CC src/output/null.lo CC src/transform/transform.lo CC src/transform/nop.lo CC src/transform/scale.lo CC src/transform/invert.lo CC src/scpi/scpi.lo CC src/scpi/scpi_tcp.lo CC src/scpi/scpi_vxi.lo CC src/scpi/vxi_clnt.lo CC src/scpi/vxi_xdr.lo CC src/modbus/modbus.lo CC src/dmm/asycii.lo CC src/dmm/bm25x.lo CC src/dmm/dtm0660.lo CC src/dmm/eev121gw.lo CC src/dmm/es519xx.lo CC src/dmm/fs9721.lo CC src/dmm/fs9922.lo CC src/dmm/m2110.lo CC src/dmm/metex14.lo CC src/dmm/ms8250d.lo CC src/dmm/rs9lcd.lo CC src/dmm/ut372.lo CC src/dmm/ut71x.lo CC src/dmm/vc870.lo CC src/dmm/vc96.lo CC src/scale/kern.lo CC src/hardware/baylibre-acme/protocol.lo CC src/hardware/baylibre-acme/api.lo CC src/hardware/baylibre-acme/gpio.lo CC src/hardware/beaglelogic/protocol.lo CC src/hardware/beaglelogic/api.lo CC src/hardware/beaglelogic/beaglelogic_native.lo CC src/hardware/beaglelogic/beaglelogic_tcp.lo CC src/hardware/demo/protocol.lo CC src/hardware/demo/api.lo CC src/hardware/fluke-45/protocol.lo CC src/hardware/fluke-45/api.lo CC src/hardware/hp-3457a/protocol.lo CC src/hardware/hp-3457a/api.lo CC src/hardware/ipdbg-la/protocol.lo CC src/hardware/ipdbg-la/api.lo CC src/hardware/lecroy-xstream/protocol.lo CC src/hardware/lecroy-xstream/api.lo CC src/hardware/maynuo-m97/protocol.lo CC src/hardware/maynuo-m97/api.lo CC src/hardware/rigol-ds/protocol.lo CC src/hardware/rigol-ds/api.lo CC src/hardware/scpi-pps/protocol.lo CC src/hardware/scpi-pps/profiles.lo CC src/hardware/scpi-pps/api.lo CC src/hardware/siglent-sds/protocol.lo CC src/hardware/siglent-sds/api.lo CC src/hardware/yokogawa-dlm/protocol.lo CC src/hardware/yokogawa-dlm/protocol_wrappers.lo CC src/hardware/yokogawa-dlm/api.lo CCLD src/libdrivers_head.la src/hardware/siglent-sds/protocol.c: In function 'siglent_sds_get_digital': src/hardware/siglent-sds/protocol.c:382:35: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (data_low_channels->len <= samples_index) { ^~ src/hardware/siglent-sds/protocol.c:391:36: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (data_high_channels->len <= samples_index) { ^~ src/hardware/siglent-sds/protocol.c:417:32: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] for (long index = 0; index < tmp_samplebuf->len; index++) { ^ In file included from src/hardware/siglent-sds/protocol.c:37:0: src/hardware/siglent-sds/protocol.c: In function 'siglent_sds_receive': src/hardware/siglent-sds/protocol.h:29:20: warning: format '%li' expects argument of type 'long int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Wformat=] #define LOG_PREFIX "siglent-sds" ^ ./src/libsigrok-internal.h:761:41: note: in expansion of macro 'LOG_PREFIX' #define sr_dbg(...) sr_log(SR_LOG_DBG, LOG_PREFIX ": " __VA_ARGS__) ^~~~~~~~~~ src/hardware/siglent-sds/protocol.c:566:6: note: in expansion of macro 'sr_dbg' sr_dbg("Requesting: %li bytes.", devc->num_samples - devc->num_block_bytes); ^~~~~~ src/hardware/siglent-sds/protocol.c:566:28: note: format string is defined here sr_dbg("Requesting: %li bytes.", devc->num_samples - devc->num_block_bytes); ~~^ %lli In file included from src/hardware/siglent-sds/protocol.c:37:0: src/hardware/siglent-sds/protocol.c: In function 'siglent_sds_get_dev_cfg_horizontal': src/hardware/siglent-sds/protocol.h:29:20: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Wformat=] #define LOG_PREFIX "siglent-sds" ^ ./src/libsigrok-internal.h:761:41: note: in expansion of macro 'LOG_PREFIX' #define sr_dbg(...) sr_log(SR_LOG_DBG, LOG_PREFIX ": " __VA_ARGS__) ^~~~~~~~~~ src/hardware/siglent-sds/protocol.c:942:2: note: in expansion of macro 'sr_dbg' sr_dbg("Current memory depth: %lu.", devc->memory_depth_analog); ^~~~~~ src/hardware/siglent-sds/protocol.c:942:34: note: format string is defined here sr_dbg("Current memory depth: %lu.", devc->memory_depth_analog); ~~^ %llu CCLD src/libdrivers_tail.la CCLD src/libdrivers.la copying selected object files to avoid basename conflicts... CCLD src/libdrivers.o GEN src/libdrivers.lo CCLD libsigrok.la >>> libsigrok 0.5.1 Installing to staging directory PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j8 DESTDIR=/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-gnueabihf/sysroot install -C /home/peko/autobuild/instance-0/output/build/libsigrok-0.5.1/ /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib' /bin/sh ./libtool --silent --mode=install /usr/bin/install -c libsigrok.la '/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/libsigrok' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/share/mime/packages' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/share/icons/hicolor/48x48/mimetypes' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/share/icons/hicolor/scalable/mimetypes' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/pkgconfig' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/libsigrok' /usr/bin/install -c -m 644 libsigrok.pc '/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/pkgconfig' /usr/bin/install -c -m 644 include/libsigrok/libsigrok.h include/libsigrok/proto.h '/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/libsigrok' /usr/bin/install -c -m 644 include/libsigrok/version.h '/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/libsigrok' /usr/bin/install -c -m 644 contrib/vnd.sigrok.session.xml '/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/share/mime/packages' /usr/bin/install -c -m 644 contrib/libsigrok.svg '/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/share/icons/hicolor/scalable/mimetypes' /usr/bin/install -c -m 644 contrib/libsigrok.png '/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/share/icons/hicolor/48x48/mimetypes' libtool: warning: remember to run 'libtool --finish /usr/lib' >>> libsigrok 0.5.1 Fixing libtool files >>> libsigrok 0.5.1 Installing to target PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j8 DESTDIR=/home/peko/autobuild/instance-0/output/target install -C /home/peko/autobuild/instance-0/output/build/libsigrok-0.5.1/ /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/lib' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/include/libsigrok' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/mime/packages' /bin/sh ./libtool --silent --mode=install /usr/bin/install -c libsigrok.la '/home/peko/autobuild/instance-0/output/target/usr/lib' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/icons/hicolor/48x48/mimetypes' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/icons/hicolor/scalable/mimetypes' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/lib/pkgconfig' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/include/libsigrok' /usr/bin/install -c -m 644 libsigrok.pc '/home/peko/autobuild/instance-0/output/target/usr/lib/pkgconfig' /usr/bin/install -c -m 644 include/libsigrok/version.h '/home/peko/autobuild/instance-0/output/target/usr/include/libsigrok' /usr/bin/install -c -m 644 include/libsigrok/libsigrok.h include/libsigrok/proto.h '/home/peko/autobuild/instance-0/output/target/usr/include/libsigrok' /usr/bin/install -c -m 644 contrib/vnd.sigrok.session.xml '/home/peko/autobuild/instance-0/output/target/usr/share/mime/packages' /usr/bin/install -c -m 644 contrib/libsigrok.png '/home/peko/autobuild/instance-0/output/target/usr/share/icons/hicolor/48x48/mimetypes' /usr/bin/install -c -m 644 contrib/libsigrok.svg '/home/peko/autobuild/instance-0/output/target/usr/share/icons/hicolor/scalable/mimetypes' libtool: warning: remember to run 'libtool --finish /usr/lib' neard-0.16.tar.xz: OK (sha256: eae3b11c541a988ec11ca94b7deab01080cd5b58cfef3ced6ceac9b6e6e65b36) >>> neard 0.16 Extracting xzcat /home/peko/autobuild/instance-0/dl/neard/neard-0.16.tar.xz | /home/peko/autobuild/instance-0/output/host/bin/tar --strip-components=1 -C /home/peko/autobuild/instance-0/output/build/neard-0.16 -xf - >>> neard 0.16 Patching >>> neard 0.16 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/peko/autobuild/instance-0/output/build/neard-0.16 -name $file); do cp support/gnuconfig/$file $i; done; done >>> neard 0.16 Patching libtool patching file /home/peko/autobuild/instance-0/output/build/neard-0.16/ltmain.sh Hunk #7 succeeded at 6699 (offset 3 lines). Hunk #8 succeeded at 9280 (offset 6 lines). >>> neard 0.16 Configuring (cd /home/peko/autobuild/instance-0/output/build/neard-0.16/ && rm -rf config.cache && PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" AR="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-ar" AS="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-as" LD="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-ld" NM="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-nm" CC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc" GCC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc" CPP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-cpp" CXX="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-g++" FC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gfortran" F77="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gfortran" RANLIB="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-ranlib" READELF="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-readelf" STRIP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-strip" OBJCOPY="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-objcopy" OBJDUMP="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/peko/autobuild/instance-0/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-0/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-0/output/host/include" LDFLAGS_FOR_BUILD="-L/home/peko/autobuild/instance-0/output/host/lib -Wl,-rpath,/home/peko/autobuild/instance-0/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-as" DEFAULT_LINKER="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/peko/autobuild/instance-0/output/host/bin/pkg-config" STAGING_DIR="/home/peko/autobuild/instance-0/output/host/arm-buildroot-linux-gnueabihf/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CONFIG_SITE=/dev/null ./configure --target=arm-buildroot-linux-gnueabihf --host=arm-buildroot-linux-gnueabihf --build=powerpc64le-unknown-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared --disable-traces --enable-systemd ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --disable-traces checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-buildroot-linux-gnueabihf-strip... /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-strip checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether to enable maintainer-specific portions of Makefiles... no checking pkg-config is at least version 0.9.0... yes checking for arm-buildroot-linux-gnueabihf-gcc... /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc accepts -g... yes checking for /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc option to accept ISO C89... none needed checking whether /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc... none checking whether /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc accepts -fPIE... yes checking build system type... powerpc64le-unknown-linux-gnu checking host system type... arm-buildroot-linux-gnueabihf checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc... /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-ld checking if the linker (/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-nm checking the name lister (/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert powerpc64le-unknown-linux-gnu file names to arm-buildroot-linux-gnueabihf format... func_convert_file_noop checking how to convert powerpc64le-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-ld option to reload object files... -r checking for arm-buildroot-linux-gnueabihf-objdump... /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-objdump checking how to recognize dependent libraries... pass_all checking for arm-buildroot-linux-gnueabihf-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for arm-buildroot-linux-gnueabihf-ar... /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-ar checking for archiver @FILE support... @ checking for arm-buildroot-linux-gnueabihf-strip... (cached) /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-strip checking for arm-buildroot-linux-gnueabihf-ranlib... /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-ranlib checking command to parse /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-nm output from /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc object... ok checking for sysroot... no checking for arm-buildroot-linux-gnueabihf-mt... no checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-cpp checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc supports -fno-rtti -fno-exceptions... no checking for /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc option to produce PIC... -fPIC -DPIC checking if /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc PIC flag -fPIC -DPIC works... yes checking if /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc static flag -static works... yes checking if /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc supports -c -o file.o... yes checking if /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc supports -c -o file.o... (cached) yes checking whether the /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-gcc linker (/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-gnueabihf-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking systemd system unit dir... /home/peko/autobuild/instance-0/output/host/bin/../arm-buildroot-linux-gnueabihf/sysroot/usr/lib/systemd/system checking systemd user unit dir... /home/peko/autobuild/instance-0/output/host/bin/../arm-buildroot-linux-gnueabihf/sysroot/usr/lib/systemd/user checking for dlopen in -ldl... yes checking for GLIB... yes checking for DBUS... yes checking for LIBNL3... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating include/version.h config.status: creating neard.pc config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --disable-traces >>> neard 0.16 Building PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j8 -C /home/peko/autobuild/instance-0/output/build/neard-0.16/ GEN src/builtin.h /usr/bin/make --no-print-directory all-am GEN include/near/types.h GEN include/near/log.h GEN include/near/plugin.h GEN include/near/adapter.h GEN include/near/tag.h GEN include/near/ndef.h GEN include/near/tlv.h GEN include/near/setting.h GEN include/near/device.h GEN include/near/nfc_copy.h GEN include/near/snep.h GEN include/near/version.h GEN include/near/dbus.h GEN src/neard.service CC gdbus/src_neard-mainloop.o CC gdbus/src_neard-watch.o CC gdbus/src_neard-object.o CC gdbus/src_neard-client.o CC gdbus/src_neard-polkit.o CC plugins/src_neard-nfctype1.o CC plugins/src_neard-nfctype2.o CC plugins/src_neard-mifare.o CC plugins/src_neard-nfctype3.o CC plugins/src_neard-nfctype4.o CC plugins/src_neard-nfctype5.o CC plugins/src_neard-npp.o CC plugins/src_neard-p2p.o CC plugins/src_neard-snep.o CC plugins/src_neard-snep-validation.o CC plugins/src_neard-llcp-validation.o CC plugins/src_neard-handover.o CC plugins/src_neard-phdc.o CC src/src_neard-main.o CC src/src_neard-error.o CC src/src_neard-dbus.o CC src/src_neard-log.o CC src/src_neard-manager.o CC src/src_neard-adapter.o CC src/src_neard-device.o CC src/src_neard-tag.o CC src/src_neard-plugin.o CC src/src_neard-netlink.o CC src/src_neard-ndef.o CC src/src_neard-tlv.o CC src/src_neard-bluetooth.o CC src/src_neard-agent.o CC src/src_neard-snep.o CCLD src/neard >>> neard 0.16 Installing to target PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" /usr/bin/make -j8 DESTDIR=/home/peko/autobuild/instance-0/output/target install -C /home/peko/autobuild/instance-0/output/build/neard-0.16/ /usr/bin/make --no-print-directory install-am /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/libexec/nfc' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/etc/dbus-1/system.d/' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/man/man1' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/include' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/man/man5' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/share/man/man8' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/lib/pkgconfig' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/usr/include/near' /usr/bin/install -c -m 644 include/version.h '/home/peko/autobuild/instance-0/output/target/usr/include' /usr/bin/install -c -m 644 neard.pc '/home/peko/autobuild/instance-0/output/target/usr/lib/pkgconfig' /usr/bin/install -c -m 644 doc/nfctool.1 '/home/peko/autobuild/instance-0/output/target/usr/share/man/man1' /usr/bin/install -c -m 644 doc/neard.conf.5 '/home/peko/autobuild/instance-0/output/target/usr/share/man/man5' /usr/bin/install -c -m 644 doc/neard.8 '/home/peko/autobuild/instance-0/output/target/usr/share/man/man8' /bin/sh ./libtool --mode=install /usr/bin/install -c src/neard '/home/peko/autobuild/instance-0/output/target/usr/libexec/nfc' /usr/bin/install -c -m 644 src/org.neard.conf '/home/peko/autobuild/instance-0/output/target/etc/dbus-1/system.d/' /usr/bin/install -c -m 644 include/types.h include/log.h include/plugin.h include/tag.h include/adapter.h include/ndef.h include/tlv.h include/setting.h include/device.h include/nfc_copy.h include/snep.h '/home/peko/autobuild/instance-0/output/target/usr/include/near' /usr/bin/mkdir -p '/home/peko/autobuild/instance-0/output/target/home/peko/autobuild/instance-0/output/host/bin/../arm-buildroot-linux-gnueabihf/sysroot/usr/lib/systemd/system' libtool: install: /usr/bin/install -c src/neard /home/peko/autobuild/instance-0/output/target/usr/libexec/nfc/neard /usr/bin/install -c -m 644 src/neard.service '/home/peko/autobuild/instance-0/output/target/home/peko/autobuild/instance-0/output/host/bin/../arm-buildroot-linux-gnueabihf/sysroot/usr/lib/systemd/system' neard: installs files in /home/peko/autobuild/instance-0/output/target//home/peko/autobuild/instance-0/output make[1]: *** [/home/peko/autobuild/instance-0/output/build/neard-0.16/.stamp_target_installed] Error 1 make: *** [_all] Error 2 make: Leaving directory `/home/peko/autobuild/instance-0/buildroot'