/usr/bin/install -c -m 644 ../lib/libqlibc.a /home/buildroot/autobuild/run/instance-2/output-1/target//usr/lib/libqlibc.a /usr/bin/install -c -m 644 ../lib/libqlibc.so.2 /home/buildroot/autobuild/run/instance-2/output-1/target//usr/lib/libqlibc.so.2 ( cd /home/buildroot/autobuild/run/instance-2/output-1/target//usr/lib; ln -s -f libqlibc.so.2 libqlibc.so ) /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ar -rc ../lib/libqlibcext.a extensions/qconfig.o extensions/qaconf.o extensions/qlog.o extensions/qhttpclient.o extensions/qdatabase.o extensions/qtokenbucket.o /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ranlib ../lib/libqlibcext.a /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -shared -Wl,-soname,libqlibcext.so.2 -o ../lib/libqlibcext.so.2 extensions/qconfig.o extensions/qaconf.o extensions/qlog.o extensions/qhttpclient.o extensions/qdatabase.o extensions/qtokenbucket.o ( cd ../lib; ln -s -f libqlibcext.so.2 libqlibcext.so ) /bin/mkdir -p /home/buildroot/autobuild/run/instance-2/output-1/target//usr/include/qlibc /usr/bin/install -c -m 644 ../include/qlibc/qlibcext.h /home/buildroot/autobuild/run/instance-2/output-1/target//usr/include/qlibc/qlibcext.h /bin/mkdir -p /home/buildroot/autobuild/run/instance-2/output-1/target//usr/include/qlibc/extensions/ /usr/bin/install -c -m 644 ../include/qlibc/extensions/qconfig.h /home/buildroot/autobuild/run/instance-2/output-1/target//usr/include/qlibc/extensions/qconfig.h /usr/bin/install -c -m 644 ../include/qlibc/extensions/qaconf.h /home/buildroot/autobuild/run/instance-2/output-1/target//usr/include/qlibc/extensions/qaconf.h /usr/bin/install -c -m 644 ../include/qlibc/extensions/qlog.h /home/buildroot/autobuild/run/instance-2/output-1/target//usr/include/qlibc/extensions/qlog.h /usr/bin/install -c -m 644 ../include/qlibc/extensions/qhttpclient.h /home/buildroot/autobuild/run/instance-2/output-1/target//usr/include/qlibc/extensions/qhttpclient.h /usr/bin/install -c -m 644 ../include/qlibc/extensions/qdatabase.h /home/buildroot/autobuild/run/instance-2/output-1/target//usr/include/qlibc/extensions/qdatabase.h /usr/bin/install -c -m 644 ../include/qlibc/extensions/qtokenbucket.h /home/buildroot/autobuild/run/instance-2/output-1/target//usr/include/qlibc/extensions/qtokenbucket.h /bin/mkdir -p /home/buildroot/autobuild/run/instance-2/output-1/target//usr/lib /usr/bin/install -c -m 644 ../lib/libqlibcext.a /home/buildroot/autobuild/run/instance-2/output-1/target//usr/lib/libqlibcext.a /usr/bin/install -c -m 644 ../lib/libqlibcext.so.2 /home/buildroot/autobuild/run/instance-2/output-1/target//usr/lib/libqlibcext.so.2 ( cd /home/buildroot/autobuild/run/instance-2/output-1/target//usr/lib; ln -s -f libqlibcext.so.2 libqlibcext.so ) make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output-1/build/qlibc-2.4.4/src' make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output-1/build/qlibc-2.4.4' semodule-utils-3.0.tar.gz: OK (sha256: 14ee2db21f36766ffbbb65770f8e7236d21675db9f0f5d40f50974711da598cf) >>> semodule-utils 3.0 Extracting gzip -d -c /home/buildroot/autobuild/run/instance-2/dl/semodule-utils/semodule-utils-3.0.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0 -xf - >>> semodule-utils 3.0 Patching >>> semodule-utils 3.0 Configuring >>> semodule-utils 3.0 Building /usr/bin/make -j4 -C /home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0 PATH="/home/buildroot/autobuild/run/instance-2/output-1/host/bin:/home/buildroot/autobuild/run/instance-2/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" AR="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ar" AS="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-as" LD="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ld" NM="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-nm" CC="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" GCC="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" CPP="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-cpp" CXX="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-g++" FC="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gfortran" F77="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gfortran" RANLIB="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ranlib" READELF="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-readelf" STRIP="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-strip" OBJCOPY="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-objcopy" OBJDUMP="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/run/instance-2/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-2/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-2/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/run/instance-2/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-2/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-as" DEFAULT_LINKER="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/run/instance-2/output-1/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl LIBSEPOLA=/home/buildroot/autobuild/run/instance-2/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libsepol.a DESTDIR=/home/buildroot/autobuild/run/instance-2/output-1/host/powerpc-buildroot-linux-uclibc/sysroot all make[1]: Entering directory `/home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0' make[2]: Entering directory `/home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0/semodule_package' /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o semodule_package.o semodule_package.c /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 semodule_unpackage.c -lsepol -o semodule_unpackage /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc semodule_package.o -lsepol -o semodule_package make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0/semodule_package' make[2]: Entering directory `/home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0/semodule_link' /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o semodule_link.o semodule_link.c /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc semodule_link.o -lsepol -o semodule_link make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0/semodule_link' make[2]: Entering directory `/home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0/semodule_expand' /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o semodule_expand.o semodule_expand.c /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc semodule_expand.o -lsepol -o semodule_expand make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0/semodule_expand' make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0' >>> semodule-utils 3.0 Installing to target /usr/bin/make -j4 -C /home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0 PATH="/home/buildroot/autobuild/run/instance-2/output-1/host/bin:/home/buildroot/autobuild/run/instance-2/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" AR="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ar" AS="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-as" LD="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ld" NM="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-nm" CC="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" GCC="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" CPP="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-cpp" CXX="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-g++" FC="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gfortran" F77="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gfortran" RANLIB="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ranlib" READELF="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-readelf" STRIP="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-strip" OBJCOPY="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-objcopy" OBJDUMP="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/run/instance-2/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-2/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-2/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/run/instance-2/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-2/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-as" DEFAULT_LINKER="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/run/instance-2/output-1/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl LIBSEPOLA=/home/buildroot/autobuild/run/instance-2/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libsepol.a DESTDIR=/home/buildroot/autobuild/run/instance-2/output-1/target install make[1]: Entering directory `/home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0' make[2]: Entering directory `/home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0/semodule_package' mkdir -p /home/buildroot/autobuild/run/instance-2/output-1/target/usr/bin install -m 755 semodule_package /home/buildroot/autobuild/run/instance-2/output-1/target/usr/bin install -m 755 semodule_unpackage /home/buildroot/autobuild/run/instance-2/output-1/target/usr/bin test -d /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/man8 || install -m 755 -d /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/man8 install -m 644 semodule_package.8 /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/man8/ install -m 644 semodule_unpackage.8 /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/man8/ for lang in ru ; do \ if [ -e ${lang} ] ; then \ test -d /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/${lang}/man8 || install -m 755 -d /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/${lang}/man8 ; \ install -m 644 ${lang}/*.8 /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/${lang}/man8/ ; \ fi ; \ done make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0/semodule_package' make[2]: Entering directory `/home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0/semodule_link' mkdir -p /home/buildroot/autobuild/run/instance-2/output-1/target/usr/bin install -m 755 semodule_link /home/buildroot/autobuild/run/instance-2/output-1/target/usr/bin test -d /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/man8 || install -m 755 -d /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/man8 install -m 644 semodule_link.8 /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/man8/ for lang in ru ; do \ if [ -e ${lang} ] ; then \ test -d /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/${lang}/man8 || install -m 755 -d /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/${lang}/man8 ; \ install -m 644 ${lang}/*.8 /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/${lang}/man8/ ; \ fi ; \ done make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0/semodule_link' make[2]: Entering directory `/home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0/semodule_expand' mkdir -p /home/buildroot/autobuild/run/instance-2/output-1/target/usr/bin install -m 755 semodule_expand /home/buildroot/autobuild/run/instance-2/output-1/target/usr/bin test -d /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/man8 || install -m 755 -d /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/man8 install -m 644 semodule_expand.8 /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/man8/ for lang in ru ; do \ if [ -e ${lang} ] ; then \ test -d /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/${lang}/man8 || install -m 755 -d /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/${lang}/man8 ; \ install -m 644 ${lang}/*.8 /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man/${lang}/man8/ ; \ fi ; \ done make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0/semodule_expand' make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output-1/build/semodule-utils-3.0' tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2.tar.gz: OK (sha256: 3d2b2375e2874933f9aa59d4f25bb6b334747219eb0d7a076974e61222d59bf6) >>> tstools 08f6be304040e7b84760ac3920bcff4a563b6cd2 Extracting gzip -d -c /home/buildroot/autobuild/run/instance-2/dl/tstools/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-2/output-1/build/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2 -xf - >>> tstools 08f6be304040e7b84760ac3920bcff4a563b6cd2 Patching Applying 0001-build-get-along-with-buildroot.patch using patch: patching file Makefile Hunk #2 succeeded at 449 (offset 3 lines). >>> tstools 08f6be304040e7b84760ac3920bcff4a563b6cd2 Configuring >>> tstools 08f6be304040e7b84760ac3920bcff4a563b6cd2 Building PATH="/home/buildroot/autobuild/run/instance-2/output-1/host/bin:/home/buildroot/autobuild/run/instance-2/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" AR="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ar" AS="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-as" LD="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ld" NM="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-nm" CC="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" GCC="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" CPP="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-cpp" CXX="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-g++" FC="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gfortran" F77="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gfortran" RANLIB="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ranlib" READELF="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-readelf" STRIP="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-strip" OBJCOPY="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-objcopy" OBJDUMP="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/run/instance-2/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-2/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-2/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/run/instance-2/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-2/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-as" DEFAULT_LINKER="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/run/instance-2/output-1/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl LD="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" PATH="/home/buildroot/autobuild/run/instance-2/output-1/host/bin:/home/buildroot/autobuild/run/instance-2/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j1 -C /home/buildroot/autobuild/run/instance-2/output-1/build/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2 make[1]: Entering directory `/home/buildroot/autobuild/run/instance-2/output-1/build/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2' mkdir bin mkdir lib mkdir obj /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c esfilter.c -o obj/esfilter.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c accessunit.c -o obj/accessunit.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c avs.c -o obj/avs.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c ac3.c -o obj/ac3.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c adts.c -o obj/adts.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c bitdata.c -o obj/bitdata.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c es.c -o obj/es.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c filter.c -o obj/filter.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c fmtx.c -o obj/fmtx.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c h222.c -o obj/h222.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c h262.c -o obj/h262.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c audio.c -o obj/audio.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c l2audio.c -o obj/l2audio.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC l2audio.c: In function 'peek_frame_header': l2audio.c:146:16: warning: variable 'framesize' set but not used [-Wunused-but-set-variable] unsigned int framesize, framelen; ^~~~~~~~~ l2audio.c:144:25: warning: variable 'sampling' set but not used [-Wunused-but-set-variable] unsigned int bitrate, sampling; ^~~~~~~~ /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c misc.c -o obj/misc.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c nalunit.c -o obj/nalunit.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c ps.c -o obj/ps.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c pes.c -o obj/pes.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC pes.c: In function 'find_ESCR_in_PES': pes.c:3541:9: warning: variable 'packet_length' set but not used [-Wunused-but-set-variable] int packet_length; ^~~~~~~~~~~~~ /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c pidint.c -o obj/pidint.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c printing.c -o obj/printing.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c reverse.c -o obj/reverse.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c ts.c -o obj/ts.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c tsplay_innards.c -o obj/tsplay_innards.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c tswrite.c -o obj/tswrite.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c pcap.c -o obj/pcap.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c ethernet.c -o obj/ethernet.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c ipv4.c -o obj/ipv4.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC rm -f lib/libtstools.a ar rc lib/libtstools.a obj/accessunit.o obj/avs.o obj/ac3.o obj/adts.o obj/bitdata.o obj/es.o obj/filter.o obj/fmtx.o obj/h222.o obj/h262.o obj/audio.o obj/l2audio.o obj/misc.o obj/nalunit.o obj/ps.o obj/pes.o obj/pidint.o obj/printing.o obj/reverse.o obj/ts.o obj/tsplay_innards.o obj/tswrite.o obj/pcap.o obj/ethernet.o obj/ipv4.o /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/esfilter.o -o bin/esfilter -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c ts2es.c -o obj/ts2es.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/ts2es.o -o bin/ts2es -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c es2ts.c -o obj/es2ts.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/es2ts.o -o bin/es2ts -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c esdots.c -o obj/esdots.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/esdots.o -o bin/esdots -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c esmerge.c -o obj/esmerge.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/esmerge.o -o bin/esmerge -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c esreport.c -o obj/esreport.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/esreport.o -o bin/esreport -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c esreverse.c -o obj/esreverse.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/esreverse.o -o bin/esreverse -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c ps2ts.c -o obj/ps2ts.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/ps2ts.o -o bin/ps2ts -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c psreport.c -o obj/psreport.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/psreport.o -o bin/psreport -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c psdots.c -o obj/psdots.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/psdots.o -o bin/psdots -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c stream_type.c -o obj/stream_type.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/stream_type.o -o bin/stream_type -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c tsdvbsub.c -o obj/tsdvbsub.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/tsdvbsub.o -o bin/tsdvbsub -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c tsinfo.c -o obj/tsinfo.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/tsinfo.o -o bin/tsinfo -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c tsreport.c -o obj/tsreport.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/tsreport.o -o bin/tsreport -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c tsplay.c -o obj/tsplay.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC tsplay.c: In function 'main': tsplay.c:354:10: warning: variable 'use_network' set but not used [-Wunused-but-set-variable] int use_network = FALSE; ^~~~~~~~~~~ /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/tsplay.o -o bin/tsplay -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c tsserve.c -o obj/tsserve.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/tsserve.o -o bin/tsserve -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c ts_packet_insert.c -o obj/ts_packet_insert.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/ts_packet_insert.o -o bin/ts_packet_insert -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c m2ts2ts.c -o obj/m2ts2ts.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/m2ts2ts.o -o bin/m2ts2ts -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c pcapreport.c -o obj/pcapreport.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC pcapreport.c: In function 'stream_gen_names2': pcapreport.c:383:48: warning: '%s' directive output may be truncated writing up to 31 bytes into a region of size between 6 and 54 [-Wformat-truncation=] snprintf(identifier, 64, "%s_%u.%u.%u.%u_%u%s", ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ vlan_name("_V", st, sizeof(pbuf), pbuf), ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ dest_addr >> 24, (dest_addr >> 16) & 0xff, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ (dest_addr >> 8) & 0xff, dest_addr & 0xff, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ dest_port, ~~~~~~~~~~ section_name(ctx, st, pbuf2, sizeof(pbuf2))); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ pcapreport.c:383:5: note: 'snprintf' output between 11 and 90 bytes into a destination of size 64 snprintf(identifier, 64, "%s_%u.%u.%u.%u_%u%s", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ vlan_name("_V", st, sizeof(pbuf), pbuf), ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ dest_addr >> 24, (dest_addr >> 16) & 0xff, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ (dest_addr >> 8) & 0xff, dest_addr & 0xff, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ dest_port, ~~~~~~~~~~ section_name(ctx, st, pbuf2, sizeof(pbuf2))); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ pcapreport.c:404:41: warning: '%s' directive output may be truncated writing between 2 and 3 bytes into a region of size between 0 and 63 [-Wformat-truncation=] snprintf(name + base_len, 64, "%s.%s", identifier, ^~ pcapreport.c:404:7: note: 'snprintf' output between 4 and 68 bytes into a destination of size 64 snprintf(name + base_len, 64, "%s.%s", identifier, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ (rtp_header != NULL && rtp_header->is_rtp_raw) ? "rtp" : "ts"); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ pcapreport.c:413:38: warning: '.csv' directive output may be truncated writing 4 bytes into a region of size between 1 and 64 [-Wformat-truncation=] snprintf(name + base_len, 64, "%s.csv", identifier); ^~~~ pcapreport.c:413:5: note: 'snprintf' output between 5 and 68 bytes into a destination of size 64 snprintf(name + base_len, 64, "%s.csv", identifier); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/pcapreport.o -o bin/pcapreport -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c tsfilter.c -o obj/tsfilter.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC tsfilter.c: In function 'main': tsfilter.c:65:9: warning: variable 'verbose' set but not used [-Wunused-but-set-variable] int verbose = FALSE; ^~~~~~~ /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/tsfilter.o -o bin/tsfilter -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -c rtp2264.c -o obj/rtp2264.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc obj/rtp2264.o -o bin/rtp2264 -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc -shared -o lib/libtstools.so obj/accessunit.o obj/avs.o obj/ac3.o obj/adts.o obj/bitdata.o obj/es.o obj/filter.o obj/fmtx.o obj/h222.o obj/h262.o obj/audio.o obj/l2audio.o obj/misc.o obj/nalunit.o obj/ps.o obj/pes.o obj/pidint.o obj/printing.o obj/reverse.o obj/ts.o obj/tsplay_innards.o obj/tswrite.o obj/pcap.o obj/ethernet.o obj/ipv4.o -lc make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output-1/build/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2' >>> tstools 08f6be304040e7b84760ac3920bcff4a563b6cd2 Installing to target PATH="/home/buildroot/autobuild/run/instance-2/output-1/host/bin:/home/buildroot/autobuild/run/instance-2/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" AR="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ar" AS="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-as" LD="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ld" NM="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-nm" CC="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" GCC="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gcc" CPP="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-cpp" CXX="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-g++" FC="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gfortran" F77="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-gfortran" RANLIB="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ranlib" READELF="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-readelf" STRIP="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-strip" OBJCOPY="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-objcopy" OBJDUMP="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/run/instance-2/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-2/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-2/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/run/instance-2/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-2/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-as" DEFAULT_LINKER="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/buildroot/autobuild/run/instance-2/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/run/instance-2/output-1/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl PATH="/home/buildroot/autobuild/run/instance-2/output-1/host/bin:/home/buildroot/autobuild/run/instance-2/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 -C /home/buildroot/autobuild/run/instance-2/output-1/build/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2 DESTDIR=/home/buildroot/autobuild/run/instance-2/output-1/target install make[1]: Entering directory `/home/buildroot/autobuild/run/instance-2/output-1/build/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2' make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output-1/build/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2' ux500-firmware_1.1.3-6linaro1.tar.gz: OK (sha256: 81633274a9157c076e5e09b5addd81fbcef504b829fc801041cea50eea774bcd) >>> ux500-firmware 1.1.3-6 Extracting gzip -d -c /home/buildroot/autobuild/run/instance-2/dl/ux500-firmware/ux500-firmware_1.1.3-6linaro1.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-2/output-1/build/ux500-firmware-1.1.3-6 -xf - >>> ux500-firmware 1.1.3-6 Patching >>> ux500-firmware 1.1.3-6 Configuring >>> ux500-firmware 1.1.3-6 Building >>> ux500-firmware 1.1.3-6 Installing to target PATH="/home/buildroot/autobuild/run/instance-2/output-1/host/bin:/home/buildroot/autobuild/run/instance-2/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 -C /home/buildroot/autobuild/run/instance-2/output-1/build/ux500-firmware-1.1.3-6 DESTDIR=/home/buildroot/autobuild/run/instance-2/output-1/target install make[1]: Entering directory `/home/buildroot/autobuild/run/instance-2/output-1/build/ux500-firmware-1.1.3-6' install -d /home/buildroot/autobuild/run/instance-2/output-1/target/lib/firmware/cw1200 install -m 0666 *.bin *.fw /home/buildroot/autobuild/run/instance-2/output-1/target/lib/firmware install -m 0666 cw1200/*.bin /home/buildroot/autobuild/run/instance-2/output-1/target/lib/firmware/cw1200 make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-2/output-1/build/ux500-firmware-1.1.3-6' for f in /home/buildroot/autobuild/run/instance-2/output-1/target/lib/firmware/CG2900* ; do mv $f ${f/CG2900/CG29XX}; done >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/buildroot/autobuild/run/instance-2/output-1/host/etc/meson sed -e 's%@TARGET_CROSS@%/home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-%g' -e 's%@TARGET_ARCH@%ppc%g' -e 's%@TARGET_CPU@%%g' -e 's%@TARGET_ENDIAN@%big%g' -e 's%@TARGET_CFLAGS@%"-D_LARGEFILE_SOURCE", "-D_LARGEFILE64_SOURCE", "-D_FILE_OFFSET_BITS=64", "-Os"@PKG_TARGET_CFLAGS@%g' -e 's%@TARGET_LDFLAGS@%@PKG_TARGET_CFLAGS@%g' -e 's%@TARGET_CXXFLAGS@%"-D_LARGEFILE_SOURCE", "-D_LARGEFILE64_SOURCE", "-D_FILE_OFFSET_BITS=64", "-Os"@PKG_TARGET_CFLAGS@%g' -e 's%@HOST_DIR@%/home/buildroot/autobuild/run/instance-2/output-1/host%g' -e 's%@STAGING_DIR@%/home/buildroot/autobuild/run/instance-2/output-1/host/powerpc-buildroot-linux-uclibc/sysroot%g' -e 's%@STATIC@%false%g' package/meson//cross-compilation.conf.in > /home/buildroot/autobuild/run/instance-2/output-1/host/etc/meson/cross-compilation.conf.in sed -e 's%@PKG_TARGET_CFLAGS@%%g' -e 's%@PKG_TARGET_LDFLAGS@%%g' -e 's%@PKG_TARGET_CXXFLAGS@%%g' /home/buildroot/autobuild/run/instance-2/output-1/host/etc/meson/cross-compilation.conf.in > /home/buildroot/autobuild/run/instance-2/output-1/host/etc/meson/cross-compilation.conf /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/buildroot/autobuild/run/instance-2/output-1/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/autobuild/run/instance-2/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /home/buildroot/autobuild/run/instance-2/output-1/build/busybox-1.31.1/.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/run/instance-2/output-1/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/run/instance-2/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/buildroot/autobuild/run/instance-2/output-1/build/busybox-1.31.1/.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/run/instance-2/output-1/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/run/instance-2/output-1/target/etc/shells; fi rm -f /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/glib-2.0/schemas/*.xml /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/glib-2.0/schemas/*.dtd /home/buildroot/autobuild/run/instance-2/output-1/host/bin/glib-compile-schemas /home/buildroot/autobuild/run/instance-2/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/share/glib-2.0/schemas --targetdir=/home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/glib-2.0/schemas No schema files found: doing nothing. mkdir -p /home/buildroot/autobuild/run/instance-2/output-1/target/etc echo "buildroot" > /home/buildroot/autobuild/run/instance-2/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/run/instance-2/output-1/target/etc/hosts mkdir -p /home/buildroot/autobuild/run/instance-2/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/run/instance-2/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/run/instance-2/output-1/target/etc/shadow rm -f /home/buildroot/autobuild/run/instance-2/output-1/target/bin/sh if [ -x /home/buildroot/autobuild/run/instance-2/output-1/target/sbin/swapon -a -x /home/buildroot/autobuild/run/instance-2/output-1/target/sbin/swapoff ]; then /bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/buildroot/autobuild/run/instance-2/output-1/target/etc/inittab; else /bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/buildroot/autobuild/run/instance-2/output-1/target/etc/inittab; fi rm -f /home/buildroot/autobuild/run/instance-2/output-1/build/locales.nopurge for i in C en_US locale-archive; do echo $i >> /home/buildroot/autobuild/run/instance-2/output-1/build/locales.nopurge; done for dir in /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/locale /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/X11/locale /home/buildroot/autobuild/run/instance-2/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/run/instance-2/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/autobuild/run/instance-2/output-1/target/usr/include /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/aclocal \ /home/buildroot/autobuild/run/instance-2/output-1/target/usr/lib/pkgconfig /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/pkgconfig \ /home/buildroot/autobuild/run/instance-2/output-1/target/usr/lib/cmake /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/cmake \ /home/buildroot/autobuild/run/instance-2/output-1/target/usr/doc find /home/buildroot/autobuild/run/instance-2/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/run/instance-2/output-1/target/lib/ /home/buildroot/autobuild/run/instance-2/output-1/target/usr/lib/ /home/buildroot/autobuild/run/instance-2/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f find: `/home/buildroot/autobuild/run/instance-2/output-1/target/usr/libexec/': No such file or directory rm -rf /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/gdb rm -rf /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/bash-completion rm -rf /home/buildroot/autobuild/run/instance-2/output-1/target/etc/bash_completion.d rm -rf /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/zsh rm -rf /home/buildroot/autobuild/run/instance-2/output-1/target/usr/man /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/man rm -rf /home/buildroot/autobuild/run/instance-2/output-1/target/usr/info /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/info rm -rf /home/buildroot/autobuild/run/instance-2/output-1/target/usr/doc /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/doc rm -rf /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/run/instance-2/output-1/target/usr/share 2>/dev/null || true rm -rf /home/buildroot/autobuild/run/instance-2/output-1/target/lib/debug /home/buildroot/autobuild/run/instance-2/output-1/target/usr/lib/debug find /home/buildroot/autobuild/run/instance-2/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/buildroot/autobuild/run/instance-2/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/run/instance-2/output-1/host/bin/powerpc-buildroot-linux-uclibc-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/buildroot/autobuild/run/instance-2/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/run/instance-2/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/run/instance-2/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2020.05-398-g32cec2a"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2020.05.2"; \ echo "PRETTY_NAME=\"Buildroot 2020.05.2\"" \ ) > /home/buildroot/autobuild/run/instance-2/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/run/instance-2/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/buildroot/autobuild/run/instance-2/output-1/per-package /home/buildroot/autobuild/run/instance-2/buildroot/support/scripts/fix-rpath target touch /home/buildroot/autobuild/run/instance-2/output-1/target/usr ln -snf /home/buildroot/autobuild/run/instance-2/output-1/host/powerpc-buildroot-linux-uclibc/sysroot /home/buildroot/autobuild/run/instance-2/output-1/staging make: Leaving directory `/home/buildroot/autobuild/run/instance-2/buildroot' make: Entering directory `/home/buildroot/autobuild/run/instance-2/buildroot' >>> Buildroot 2020.05-398-g32cec2a Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-buildroot Collecting legal info >>> host-gcc-final 8.4.0 Collecting legal info >>> host-binutils 2.32 Collecting legal info COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: 56bdea73b6145ef6ac5259b3da390b981d840c24cb03b8e1cbc678de7ecfa18d) >>> host-skeleton Collecting legal info >>> host-gmp 6.1.2 Collecting legal info COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-mpc 1.1.0 Collecting legal info COPYING.LESSER: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) >>> host-mpfr 4.0.2 Collecting legal info COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118) >>> uclibc 1.0.34 Collecting legal info COPYING.LIB: OK (sha256: 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3) >>> host-gcc-initial 8.4.0 Collecting legal info >>> linux-headers 5.6.19 Collecting legal info COPYING: OK (sha256: fb5a425bd3b3cd6071a3a9aff9909a859e7c1158d54d32e07658398cd67eb6a0) LICENSES/preferred/GPL-2.0: OK (sha256: f6b78c087c3ebdf0f3c13415070dd480a3f35d8fc76f3d02180a407c1c812f79) LICENSES/exceptions/Linux-syscall-note: OK (sha256: 8e378ab93586eb55135d3bc119cce787f7324f48394777d00c34fa3d0be3303f) >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain Collecting legal info >>> android-tools 4.2.2+git20130218 Collecting legal info debian/copyright: OK (sha256: 170c5939bf8c8eed1db8f66f2d6155e8c1a3e799e390b55e7aad253195b1ebf5) >>> host-pkgconf 1.6.1 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> openssl Collecting legal info >>> libopenssl 1.1.1g Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> apr-util 1.6.1 Collecting legal info LICENSE: OK (sha256: ef5609d18601645ad6fe22c6c122094be40e976725c1d0490778abacc836e7a2) >>> apr 1.7.0 Collecting legal info LICENSE: OK (sha256: f854aeef66ecd55a126226e82b3f26793fc3b1c584647f6a0edc5639974c38ad) >>> host-autoconf 2.69 Collecting legal info COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> util-linux 2.35.1 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> ncurses 6.1 Collecting legal info COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87) >>> host-ncurses 6.1 Collecting legal info COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87) >>> readline 8.0 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> berkeleydb 5.3.28 Collecting legal info LICENSE: OK (sha256: b78815181a53241f9347c6b47d1031fd669946f863e1edc807a291354cec024b) >>> expat 2.2.9 Collecting legal info COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76) >>> sqlite 3320300 Collecting legal info tea/license.terms: OK (sha256: 66e056b6e8687f32af30d5187611b98b12a8f46f07aaf62f43585f276e8f0ac9) >>> bearssl 0.6 Collecting legal info LICENSE.txt: OK (sha256: 771bf18c8633ea69ec9b07d2e604c4b99b7bef41b0f5ce6385d24df4448f61ca) >>> bubblewrap 0.4.1 Collecting legal info COPYING: OK (sha256: b7993225104d90ddd8024fd838faf300bea5e83d91203eab98e29512acebd69c) >>> libcap 2.27 Collecting legal info License: OK (sha256: 088cabde4662b4121258d298b0b2967bc1abffa134457ed9bc4a359685ab92bc) >>> host-gperf 3.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-libcap 2.27 Collecting legal info License: OK (sha256: 088cabde4662b4121258d298b0b2967bc1abffa134457ed9bc4a359685ab92bc) >>> busybox 1.31.1 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) >>> e2fsprogs 1.45.6 Collecting legal info NOTICE: OK (sha256: 5da5ef153e559c1d990d4c3eedbedd4442db892d37eae1f35fff069de8ec9020) lib/ss/mit-sipb-copyright.h: OK (sha256: 032989b508f1a72ebee5b3417e55d06d473f9ee203e45ab11864a7e49cdec63d) lib/et/internal.h: OK (sha256: 47182fe6631a32f271a15bbe210751b3825b7199f588879aac7d4804fc8b4b8f) >>> ccrypt 1.11 Collecting legal info COPYING: OK (sha256: d48d3af3cf27b32106ee3418c7c892cae745ece26cd909e72aa59b08e3f9c93d) >>> cgroupfs-mount 1.4 Collecting legal info debian/copyright: OK (sha256: e52f47a650734f70c40c8fd9318f85e42777bf3fba7ff1dfb72f845bb417f7e6) >>> dhrystone 2 Collecting legal info >>> dvbsnoop 1.4.50 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> genext2fs 1.4.1 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> gflags 2.2.2 Collecting legal info COPYING.txt: OK (sha256: 90d1f3701813c3cd65eee2dc736746fe46b465918f3f7d6d31463a2018b33fa5) >>> host-cmake 3.15.5 Collecting legal info Copyright.txt: OK (sha256: dc628fb936a5d229296d42083f9a8218aa32204c016919e784404c9ec58776e9) >>> gssdp 1.2.3 Collecting legal info COPYING: OK (sha256: d245807f90032872d1438d741ed21e2490e1175dc8aa3afa5ddb6c8e529b58e5) >>> host-meson 0.54.2 Collecting legal info COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) >>> host-ninja 1.10.0 Collecting legal info COPYING: OK (sha256: eb7e9ab9690124c5c9f42bdc81383d886a3dede26345b6ed15bbad7caf81f7ea) >>> host-python3 3.8.6 Collecting legal info LICENSE: OK (sha256: 1dceef1677a39befa8bf0285ab2db441ba117520bb2de839547ace006a17750d) >>> host-expat 2.2.9 Collecting legal info COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76) >>> host-libffi 3.3 Collecting legal info LICENSE: OK (sha256: deaf3a42effb551a5b140fa9afefed183a27f1341c6d1bf430d106a5e6931fc0) >>> host-zlib Collecting legal info >>> host-libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> host-python3-setuptools 44.0.0 Collecting legal info LICENSE: OK (sha256: c32a3ac395af6321efd28be73d06a00f0db6ab887d1c21d4fec46128d2056d5a) >>> libglib2 2.64.2 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-libglib2 2.64.2 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-gettext Collecting legal info >>> host-gettext-tiny adaa9c64921e80f2b8dd3610ffb508618b9204f3 Collecting legal info LICENSE: OK (sha256: b57aa4fdc1c614c28d41c1e2d5c4090935964c5f86291ba7d1c99ffd1d698b34) extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> host-pcre 8.44 Collecting legal info LICENCE: OK (sha256: 0dd9c13864dbb9ee4d77a1557e96be29b2d719fb6584192ee36611aae264c4a3) >>> host-util-linux 2.35.1 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libffi 3.3 Collecting legal info LICENSE: OK (sha256: deaf3a42effb551a5b140fa9afefed183a27f1341c6d1bf430d106a5e6931fc0) >>> pcre 8.44 Collecting legal info LICENCE: OK (sha256: 0dd9c13864dbb9ee4d77a1557e96be29b2d719fb6584192ee36611aae264c4a3) >>> libsoup 2.62.3 Collecting legal info COPYING: OK (sha256: b7993225104d90ddd8024fd838faf300bea5e83d91203eab98e29512acebd69c) >>> host-intltool 0.51.0 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> host-libxml-parser-perl 2.46 Collecting legal info README: OK (sha256: 6a2e768443ed00f09d3d4bc4dd14451035eac13c6864d68d8e2f76edf5a044f2) >>> libxml2 2.9.10 Collecting legal info COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd) >>> gupnp-av 0.12.11 Collecting legal info COPYING: OK (sha256: d245807f90032872d1438d741ed21e2490e1175dc8aa3afa5ddb6c8e529b58e5) >>> gupnp 1.2.3 Collecting legal info COPYING: OK (sha256: d245807f90032872d1438d741ed21e2490e1175dc8aa3afa5ddb6c8e529b58e5) >>> initscripts Collecting legal info >>> jquery 1.11.2 Collecting legal info >>> libconfig 1.7.2 Collecting legal info COPYING.LIB: OK (sha256: d80c9d084ebfb50ea1ed91bfbc2410d6ce542097a32c43b00781b83adcb8c77f) >>> libnl 3.5.0 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-bison 3.4.2 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> libsepol 3.0 Collecting legal info COPYING: OK (sha256: 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3) >>> libsoc 0.8.2 Collecting legal info LICENCE: OK (sha256: 782dafc98788c358fb20e530c8fde3186cdb60f5e18fe6d348fe84ee9f65ddb0) >>> mii-diag 2.11 Collecting legal info mii-diag.c: OK (sha256: c83cf866874d6171fbea4e3786370483beb6d2898ac2ea91123b144effec7fcb) >>> nuttcp 6.1.2 Collecting legal info LICENSE: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> open-lldp b71bfb87fefb31c4b1a6a7ae351791c90966c3a8 Collecting legal info COPYING: OK (sha256: 67af5abeb092213cd9c53781503320f635ba28b641e0c3f24d367e8e93a9839b) >>> opencv3 3.4.9 Collecting legal info LICENSE: OK (sha256: c3596f2f886631ac49af2c9a201ca559f850bb5726bdc25eacbe2369a70caad9) >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> qlibc 2.4.4 Collecting legal info LICENSE: OK (sha256: 7c9d03656af4c0acf0a35e29459086498dd64080eac6d2945bc1c064aaf18132) >>> semodule-utils 3.0 Collecting legal info COPYING: OK (sha256: 204d8eff92f95aac4df6c8122bc1505f468f3a901e5a4cc08940e0ede1938994) >>> tstools 08f6be304040e7b84760ac3920bcff4a563b6cd2 Collecting legal info >>> ux500-firmware 1.1.3-6 Collecting legal info license.txt: OK (sha256: b5bbc3fb3ff2f8e165b3bf60b25702d8970b3d7fe88b1c883f20615d550a7cb2) WARNING: the Buildroot source code has not been saved WARNING: gcc-final-8.4.0: cannot save license (HOST_GCC_FINAL_LICENSE_FILES not defined) WARNING: gcc-initial-8.4.0: cannot save license (HOST_GCC_INITIAL_LICENSE_FILES not defined) WARNING: dhrystone-2: cannot save license (DHRYSTONE_LICENSE_FILES not defined) WARNING: jquery-1.11.2: cannot save license (JQUERY_LICENSE_FILES not defined) WARNING: tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2: cannot save license (TSTOOLS_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/run/instance-2/output-1/legal-info make: Leaving directory `/home/buildroot/autobuild/run/instance-2/buildroot'