checking for bzlib.h... no checking for lzma_alone_decoder in -llzma... no checking lzma.h usability... no checking lzma.h presence... no checking for lzma.h... no checking for lzma_stream_encoder_mt in -llzma... no checking pkg-config is at least version 0.9.0... yes checking for is_selinux_enabled in -lselinux... no checking for setexecfilecon in -lselinux... no checking selinux/selinux.h usability... no checking selinux/selinux.h presence... no checking for selinux/selinux.h... no checking for proc_stat_list_create in -lps... no checking for kvm_openfiles in -lkvm... no checking for ANSI C header files... (cached) yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking error.h usability... yes checking error.h presence... yes checking for error.h... yes checking err.h usability... yes checking err.h presence... yes checking for err.h... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking kvm.h usability... no checking kvm.h presence... no checking for kvm.h... no checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking sys/sysctl.h usability... yes checking sys/sysctl.h presence... yes checking for sys/sysctl.h... yes checking sys/syscall.h usability... yes checking sys/syscall.h presence... yes checking for sys/syscall.h... yes checking sys/user.h usability... yes checking sys/user.h presence... yes checking for sys/user.h... yes checking sys/proc.h usability... no checking sys/proc.h presence... no checking for sys/proc.h... no checking sys/pstat.h usability... no checking sys/pstat.h presence... no checking for sys/pstat.h... no checking linux/fiemap.h usability... yes checking linux/fiemap.h presence... yes checking for linux/fiemap.h... yes checking whether byte ordering is bigendian... (cached) yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for working volatile... yes checking for mode_t... yes checking for pid_t... yes checking for size_t... yes checking for u_int8_t... yes checking for u_int16_t... yes checking for u_int32_t... yes checking for u_int64_t... yes checking for ptrdiff_t... yes checking size of unsigned int... 4 checking size of unsigned long... 4 checking for unistd.h... (cached) yes checking whether sys_siglist is declared... yes checking whether sys_errlist is declared... yes checking whether sys_nerr is declared... yes checking for va_copy... (cached) yes checking for C99 snprintf functions... (cached) yes checking whether offsetof is declared... yes checking whether makedev is declared... yes checking whether WCOREDUMP is declared... yes checking whether TIOCNOTTY is declared... yes checking whether O_NOFOLLOW is declared... yes checking whether F_ALLOCSP64 is declared... no checking whether F_PREALLOCATE is declared... no checking whether P_tmpdir is declared... yes checking for program_invocation_short_name... yes checking for __progname... yes checking for getopt... yes checking for getopt_long... yes checking for obstack_free... yes checking for strnlen... yes checking for strndup... yes checking for strerror... yes checking for strsignal... yes checking for asprintf... yes checking for scandir... yes checking for alphasort... yes checking for unsetenv... yes checking for memcpy... yes checking for lchown... yes checking for strtoimax... yes checking for isascii... yes checking for setsid... yes checking for getdtablesize... yes checking for getprogname... no checking for getexecname... no checking for lutimes... yes checking for fallocate... yes checking for posix_fallocate... yes checking for posix_fadvise... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wall... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wextra... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wno-unused-parameter... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wno-missing-field-initializers... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wmissing-declarations... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wmissing-format-attribute... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wformat -Wformat-security... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wsizeof-array-argument... no checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wpointer-arith... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wlogical-op... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wlogical-not-parentheses... no checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wswitch-bool... no checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wvla... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Winit-self... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wwrite-strings... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wcast-align... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wshadow... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wduplicated-cond... no checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wnull-dereference... no checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wdeclaration-after-statement... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wnested-externs... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wbad-function-cast... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wstrict-prototypes... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wmissing-prototypes... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wold-style-definition... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc accepts -Wc99-c11-compat... no checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wall... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wextra... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wno-unused-parameter... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wno-missing-field-initializers... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wmissing-declarations... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wmissing-format-attribute... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wformat -Wformat-security... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wsizeof-array-argument... no checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wpointer-arith... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wlogical-op... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wlogical-not-parentheses... no checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wswitch-bool... no checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wvla... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Winit-self... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wwrite-strings... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wcast-align... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wshadow... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wduplicated-cond... no checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wnull-dereference... no checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wc++11-compat... yes checking whether /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ -std=gnu++11 accepts -Wzero-as-null-pointer-constant... yes checking dpkg cpu type... powerpc checking dpkg operating system type... linux checking dpkg architecture name... powerpcspe checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating dpkg-deb/Makefile config.status: creating dpkg-split/Makefile config.status: creating dselect/Makefile config.status: creating dselect/methods/Makefile config.status: creating dselect/po/Makefile.in config.status: creating lib/Makefile config.status: creating lib/compat/Makefile config.status: creating lib/dpkg/Makefile config.status: creating lib/dpkg/libdpkg.pc config.status: creating lib/dpkg/t/Makefile config.status: creating doc/Doxyfile config.status: creating man/Makefile config.status: creating po/Makefile.in config.status: creating scripts/Makefile config.status: creating scripts/mk/Makefile config.status: creating scripts/po/Makefile.in config.status: creating src/Makefile config.status: creating utils/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing po-directories commands config.status: creating dselect/po/POTFILES config.status: creating dselect/po/Makefile config.status: creating po/POTFILES config.status: creating po/Makefile config.status: creating scripts/po/POTFILES config.status: creating scripts/po/Makefile config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-install-info Configuration: Features: NLS . . . . . . . . . . . . . : no unicode support . . . . . . . : development documentation . . : yes code coverage . . . . . . . . : no build shared libraries . . . : yes mmap loaders . . . . . . . . : no default dpkg-deb compressor . : xz Paths: devlibdir . . . . . . . . . . : ${exec_prefix}/lib pkgconfdir . . . . . . . . . : /etc/dpkg admindir . . . . . . . . . . : /var/lib/dpkg logdir . . . . . . . . . . . : /var/log perl interpreter . . . . . . : /usr/bin/perl perl libdir . . . . . . . . . : $(prefix)/share/perl5 Programs: update-alternatives . . . . . : no start-stop-daemon . . . . . . : yes dselect . . . . . . . . . . . : no System Libraries: libps . . . . . . . . . . . . : no libkvm . . . . . . . . . . . : no libselinux . . . . . . . . . : libmd . . . . . . . . . . . . : libz . . . . . . . . . . . . : yes liblzma . . . . . . . . . . . : libbz2 . . . . . . . . . . . : libcurses . . . . . . . . . . : no >>> start-stop-daemon 1.18.10 Building PATH="/home/buildroot/autobuild/run/instance-1/output/host/bin:/home/buildroot/autobuild/run/instance-1/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/snap/bin" /usr/bin/make -j8 -C /home/buildroot/autobuild/run/instance-1/output/build/start-stop-daemon-1.18.10/lib/compat make[1]: Entering directory '/home/buildroot/autobuild/run/instance-1/output/build/start-stop-daemon-1.18.10/lib/compat' CC libcompat_test_la-strnlen.lo CC libcompat_test_la-strndup.lo CC libcompat_test_la-snprintf.lo CC libcompat_test_la-strsignal.lo CC libcompat_test_la-asprintf.lo CC libcompat_test_la-vasprintf.lo CC libcompat_test_la-vsnprintf.lo CC libcompat_test_la-alphasort.lo CC libcompat_test_la-scandir.lo CC libcompat_test_la-unsetenv.lo CC empty.lo CC libcompat_test_la-strerror.lo CC md5.lo CCLD libcompat-test.la CCLD libcompat.la make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output/build/start-stop-daemon-1.18.10/lib/compat' PATH="/home/buildroot/autobuild/run/instance-1/output/host/bin:/home/buildroot/autobuild/run/instance-1/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/snap/bin" /usr/bin/make -j8 -C /home/buildroot/autobuild/run/instance-1/output/build/start-stop-daemon-1.18.10/utils make[1]: Entering directory '/home/buildroot/autobuild/run/instance-1/output/build/start-stop-daemon-1.18.10/utils' CC start-stop-daemon.o CCLD start-stop-daemon make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output/build/start-stop-daemon-1.18.10/utils' >>> start-stop-daemon 1.18.10 Installing to target /usr/bin/install -m 0755 -D /home/buildroot/autobuild/run/instance-1/output/build/start-stop-daemon-1.18.10/utils/start-stop-daemon /home/buildroot/autobuild/run/instance-1/output/target/sbin/start-stop-daemon tinymembench-v0.4.tar.gz: OK (sha256: e37a2682065b2778f2fa7f22bd59472f5ca2191be48503952ae020b8f023f23d) >>> tinymembench v0.4 Extracting gzip -d -c /home/buildroot/autobuild/run/instance-1/dl/tinymembench/tinymembench-v0.4.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-1/output/build/tinymembench-v0.4 -xf - >>> tinymembench v0.4 Patching Applying 0001-arm-fix-build-on-Thumb-only-architectures.patch using patch: patching file arm-neon.S patching file asm-opt.c >>> tinymembench v0.4 Configuring >>> tinymembench v0.4 Building PATH="/home/buildroot/autobuild/run/instance-1/output/host/bin:/home/buildroot/autobuild/run/instance-1/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/snap/bin" AR="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ar" AS="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-as" LD="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ld" NM="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-nm" CC="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc" GCC="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc" CPP="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-cpp" CXX="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++" FC="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gfortran" F77="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gfortran" RANLIB="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ranlib" READELF="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-readelf" STRIP="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-strip" OBJCOPY="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-objcopy" OBJDUMP="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/run/instance-1/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-1/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-1/output/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/run/instance-1/output/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-1/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-as" DEFAULT_LINKER="/home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os " LDFLAGS="" FCFLAGS="-mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os " FFLAGS="-mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os " PKG_CONFIG="/home/buildroot/autobuild/run/instance-1/output/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot" INTLTOOL_PERL=/usr/bin/perl /usr/bin/make -j8 -C /home/buildroot/autobuild/run/instance-1/output/build/tinymembench-v0.4 make[1]: Entering directory '/home/buildroot/autobuild/run/instance-1/output/build/tinymembench-v0.4' /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -c util.c /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -c asm-opt.c /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -c x86-sse2.S /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -c arm-neon.S /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -c mips-32.S /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -c aarch64-asm.S /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-gcc -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mabi=spe -mfloat-gprs=double -Wa,-me500x2 -Os -o tinymembench main.c util.o asm-opt.o x86-sse2.o arm-neon.o mips-32.o aarch64-asm.o -lm make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output/build/tinymembench-v0.4' >>> tinymembench v0.4 Installing to target /usr/bin/install -m 0755 -D /home/buildroot/autobuild/run/instance-1/output/build/tinymembench-v0.4/tinymembench /home/buildroot/autobuild/run/instance-1/output/target/usr/bin/tinymembench ux500-firmware_1.1.3-6linaro1.tar.gz: OK (sha256: 81633274a9157c076e5e09b5addd81fbcef504b829fc801041cea50eea774bcd) >>> ux500-firmware 1.1.3-6 Extracting gzip -d -c /home/buildroot/autobuild/run/instance-1/dl/ux500-firmware/ux500-firmware_1.1.3-6linaro1.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-1/output/build/ux500-firmware-1.1.3-6 -xf - >>> ux500-firmware 1.1.3-6 Patching >>> ux500-firmware 1.1.3-6 Configuring >>> ux500-firmware 1.1.3-6 Building >>> ux500-firmware 1.1.3-6 Installing to target PATH="/home/buildroot/autobuild/run/instance-1/output/host/bin:/home/buildroot/autobuild/run/instance-1/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/snap/bin" /usr/bin/make -j8 -C /home/buildroot/autobuild/run/instance-1/output/build/ux500-firmware-1.1.3-6 DESTDIR=/home/buildroot/autobuild/run/instance-1/output/target install make[1]: Entering directory '/home/buildroot/autobuild/run/instance-1/output/build/ux500-firmware-1.1.3-6' install -d /home/buildroot/autobuild/run/instance-1/output/target/lib/firmware/cw1200 install -m 0666 *.bin *.fw /home/buildroot/autobuild/run/instance-1/output/target/lib/firmware install -m 0666 cw1200/*.bin /home/buildroot/autobuild/run/instance-1/output/target/lib/firmware/cw1200 make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-1/output/build/ux500-firmware-1.1.3-6' for f in /home/buildroot/autobuild/run/instance-1/output/target/lib/firmware/CG2900* ; do mv $f ${f/CG2900/CG29XX}; done >>> Finalizing target directory # Check files that are touched by more than one package ./support/scripts/check-uniq-files -t target /home/buildroot/autobuild/run/instance-1/output/build/packages-file-list.txt Warning: target file "./usr/share/info/dir" is touched by more than one package: [u'gmp', u'mpfr', u'gawk', u'libffi', u'libtool'] ./support/scripts/check-uniq-files -t staging /home/buildroot/autobuild/run/instance-1/output/build/packages-file-list-staging.txt Warning: staging file "./usr/lib/libgmp.la" is touched by more than one package: [u'gmp', u'mpfr', u'libffi', u'pcre', u'libzlib', u'util-linux', u'libglib2', u'libxml2', u'sqlite', u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libgthread-2.0.la" is touched by more than one package: [u'libglib2', u'libxml2', u'sqlite', u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libhwloc.la" is touched by more than one package: [u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libsoup-2.4.la" is touched by more than one package: [u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libuuid.la" is touched by more than one package: [u'util-linux', u'libglib2', u'libxml2', u'sqlite', u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libsndfile.la" is touched by more than one package: [u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/share/info/dir" is touched by more than one package: [u'gmp', u'mpfr', u'libffi', u'libtool'] Warning: staging file "./usr/lib/libgio-2.0.la" is touched by more than one package: [u'libglib2', u'libxml2', u'sqlite', u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libspeex.la" is touched by more than one package: [u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libxml2.la" is touched by more than one package: [u'libxml2', u'sqlite', u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libgobject-2.0.la" is touched by more than one package: [u'libglib2', u'libxml2', u'sqlite', u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libpcrecpp.la" is touched by more than one package: [u'pcre', u'libzlib', u'util-linux', u'libglib2', u'libxml2', u'sqlite', u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libblkid.la" is touched by more than one package: [u'util-linux', u'libglib2', u'libxml2', u'sqlite', u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libmount.la" is touched by more than one package: [u'util-linux', u'libglib2', u'libxml2', u'sqlite', u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libpcre.la" is touched by more than one package: [u'pcre', u'libzlib', u'util-linux', u'libglib2', u'libxml2', u'sqlite', u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libogg.la" is touched by more than one package: [u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libgssdp-1.0.la" is touched by more than one package: [u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libglib-2.0.la" is touched by more than one package: [u'libglib2', u'libxml2', u'sqlite', u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libpcreposix.la" is touched by more than one package: [u'pcre', u'libzlib', u'util-linux', u'libglib2', u'libxml2', u'sqlite', u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libsqlite3.la" is touched by more than one package: [u'sqlite', u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libgmodule-2.0.la" is touched by more than one package: [u'libglib2', u'libxml2', u'sqlite', u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libltdl.la" is touched by more than one package: [u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libffi.la" is touched by more than one package: [u'libffi', u'pcre', u'libzlib', u'util-linux', u'libglib2', u'libxml2', u'sqlite', u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] Warning: staging file "./usr/lib/libmpfr.la" is touched by more than one package: [u'mpfr', u'libffi', u'pcre', u'libzlib', u'util-linux', u'libglib2', u'libxml2', u'sqlite', u'libsoup', u'gssdp', u'hwloc', u'snappy', u'leveldb', u'libogg', u'libsndfile', u'libtool', u'speex', u'pulseaudio'] ./support/scripts/check-uniq-files -t host /home/buildroot/autobuild/run/instance-1/output/build/packages-file-list-host.txt Warning: host file "./share/info/dir" is touched by more than one package: [u'host-lzip', u'host-m4', u'host-libtool', u'host-autoconf', u'host-automake', u'host-gettext', u'host-gawk', u'host-libffi'] rm -f /home/buildroot/autobuild/run/instance-1/output/target/usr/share/glib-2.0/schemas/*.xml /home/buildroot/autobuild/run/instance-1/output/target/usr/share/glib-2.0/schemas/*.dtd /home/buildroot/autobuild/run/instance-1/output/host/bin/glib-compile-schemas /home/buildroot/autobuild/run/instance-1/output/host/powerpc-buildroot-linux-gnuspe/sysroot/usr/share/glib-2.0/schemas --targetdir=/home/buildroot/autobuild/run/instance-1/output/target/usr/share/glib-2.0/schemas mkdir -p /home/buildroot/autobuild/run/instance-1/output/target/etc echo "buildroot" > /home/buildroot/autobuild/run/instance-1/output/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/run/instance-1/output/target/etc/hosts mkdir -p /home/buildroot/autobuild/run/instance-1/output/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/run/instance-1/output/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/run/instance-1/output/target/etc/shadow rm -f /home/buildroot/autobuild/run/instance-1/output/target/bin/sh rm -f /home/buildroot/autobuild/run/instance-1/output/build/locales.nopurge for i in C en_US locale-archive; do echo $i >> /home/buildroot/autobuild/run/instance-1/output/build/locales.nopurge; done for dir in /home/buildroot/autobuild/run/instance-1/output/target/usr/share/locale; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/run/instance-1/output/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/autobuild/run/instance-1/output/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/run/instance-1/output/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/run/instance-1/output/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/autobuild/run/instance-1/output/target/usr/include /home/buildroot/autobuild/run/instance-1/output/target/usr/share/aclocal \ /home/buildroot/autobuild/run/instance-1/output/target/usr/lib/pkgconfig /home/buildroot/autobuild/run/instance-1/output/target/usr/share/pkgconfig \ /home/buildroot/autobuild/run/instance-1/output/target/usr/lib/cmake /home/buildroot/autobuild/run/instance-1/output/target/usr/share/cmake find /home/buildroot/autobuild/run/instance-1/output/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/run/instance-1/output/target/lib/ /home/buildroot/autobuild/run/instance-1/output/target/usr/lib/ /home/buildroot/autobuild/run/instance-1/output/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f rm -rf /home/buildroot/autobuild/run/instance-1/output/target/usr/share/gdb rm -rf /home/buildroot/autobuild/run/instance-1/output/target/usr/share/bash-completion rm -rf /home/buildroot/autobuild/run/instance-1/output/target/usr/share/zsh rm -rf /home/buildroot/autobuild/run/instance-1/output/target/usr/man /home/buildroot/autobuild/run/instance-1/output/target/usr/share/man rm -rf /home/buildroot/autobuild/run/instance-1/output/target/usr/info /home/buildroot/autobuild/run/instance-1/output/target/usr/share/info rm -rf /home/buildroot/autobuild/run/instance-1/output/target/usr/doc /home/buildroot/autobuild/run/instance-1/output/target/usr/share/doc rm -rf /home/buildroot/autobuild/run/instance-1/output/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/run/instance-1/output/target/usr/share 2>/dev/null || true find /home/buildroot/autobuild/run/instance-1/output/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/buildroot/autobuild/run/instance-1/output/target/lib/ -type f -name 'libpthread*.so*' | \ xargs -r /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-strip --remove-section=.comment --remove-section=.note --strip-debug find /home/buildroot/autobuild/run/instance-1/output/target/lib/ -type f -name 'ld-*.so*' | \ xargs -r /home/buildroot/autobuild/run/instance-1/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-strip --remove-section=.comment --remove-section=.note --strip-debug test -f /home/buildroot/autobuild/run/instance-1/output/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/run/instance-1/output/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/run/instance-1/output/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2018.11-git-00832-gc27484b2ef"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2018.11-git"; \ echo "PRETTY_NAME=\"Buildroot 2018.11-git\"" \ ) > /home/buildroot/autobuild/run/instance-1/output/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/run/instance-1/output/target/etc >>> Sanitizing RPATH in target tree /home/buildroot/autobuild/run/instance-1/buildroot/support/scripts/fix-rpath target touch /home/buildroot/autobuild/run/instance-1/output/target/usr make: Leaving directory '/home/buildroot/autobuild/run/instance-1/buildroot' make: Entering directory '/home/buildroot/autobuild/run/instance-1/buildroot' >>> Buildroot 2018.11-git-00832-gc27484b2ef Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-lzip 1.20 Collecting legal info COPYING: OK (sha256: 3d77c1a58fbde5ddba612d1fe09965e20a3804953eca12e8c1892298bb8a5eef) >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-none Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-custom Collecting legal info >>> toolchain Collecting legal info >>> host-cryptsetup 2.0.4 Collecting legal info COPYING: OK (sha256: 45670cce8b6a0ddd66c8016cd8ccef6cd71f35717cbacc7f1e895b3855207b33) COPYING.LGPL: OK (sha256: 8c33cc37871654ec7ed87e6fbb896c8cf33ef5ef05b1611a5aed857596ffafa5) >>> host-json-c 0.13.1 Collecting legal info COPYING: OK (sha256: 74c1e6ca5eba76b54d0ad00d4815c8315c1b3bc45ff99de61d103dc92486284c) >>> host-lvm2 2.02.180 Collecting legal info COPYING: OK (sha256: e76fbcd2fb97cf202da330301327754d2db5c58b5b4bebd3a8a749393e7603d1) COPYING.LIB: OK (sha256: 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a) >>> host-libaio 0.3.111 Collecting legal info COPYING: OK (sha256: 5bbcbb737e60fe9deba08ecbd00920cfcc3403ba2e534c64fdeea49d6bb87509) >>> host-pkgconf 0.9.12 Collecting legal info ERROR: No hash found for COPYING >>> host-openssl Collecting legal info >>> host-libopenssl 1.0.2p Collecting legal info LICENSE: OK (sha256: c8f60f4842bbad0353f5d81620e72b168b5638ca3a0a999f5da113b22491612e) >>> host-zlib Collecting legal info >>> host-libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> host-popt 1.16 Collecting legal info ERROR: No hash found for COPYING >>> host-autoconf 2.69 Collecting legal info ERROR: No hash found for COPYINGv3 ERROR: No hash found for COPYING.EXCEPTION >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-gettext 0.19.8.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) ERROR: No hash found for gettext-runtime/intl/COPYING.LIB >>> host-libxml2 2.9.8 Collecting legal info COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd) >>> host-util-linux 2.32.1 Collecting legal info README.licensing: OK (sha256: 1e4b65802b0df8115395c697029d03339f983d451a473a08643309c684410d9a) Documentation/licenses/COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.UCB: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) Documentation/licenses/COPYING.BSD-3: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) >>> edid-decode f56f329ed23a25d002352dedba1e8f092a47286f Collecting legal info ERROR: No hash found for edid-decode.c >>> gawk 4.2.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-gawk 4.2.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> mpfr 3.1.6 Collecting legal info ERROR: No hash found for COPYING.LESSER >>> gmp 6.1.2 Collecting legal info ERROR: No hash found for COPYING.LESSERv3 ERROR: No hash found for COPYINGv2 >>> gssdp 1.0.2 Collecting legal info COPYING: OK (sha256: d245807f90032872d1438d741ed21e2490e1175dc8aa3afa5ddb6c8e529b58e5) >>> libglib2 2.56.1 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-libglib2 2.56.1 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-libffi 3.2.1 Collecting legal info LICENSE: OK (sha256: 0f4d7a0bfb83c37465d42dc305f124189196cc0cc2cc8d6f8461103682aebbc5) >>> host-pcre 8.42 Collecting legal info LICENCE: OK (sha256: f998c0f52eb704eff28f503580cfca3f2547280aa212994f6cf2d8e317587c1c) >>> libffi 3.2.1 Collecting legal info LICENSE: OK (sha256: 0f4d7a0bfb83c37465d42dc305f124189196cc0cc2cc8d6f8461103682aebbc5) >>> pcre 8.42 Collecting legal info LICENCE: OK (sha256: f998c0f52eb704eff28f503580cfca3f2547280aa212994f6cf2d8e317587c1c) >>> util-linux 2.32.1 Collecting legal info README.licensing: OK (sha256: 1e4b65802b0df8115395c697029d03339f983d451a473a08643309c684410d9a) Documentation/licenses/COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.UCB: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) Documentation/licenses/COPYING.BSD-3: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> libsoup 2.62.3 Collecting legal info COPYING: OK (sha256: b7993225104d90ddd8024fd838faf300bea5e83d91203eab98e29512acebd69c) >>> host-intltool 0.51.0 Collecting legal info ERROR: No hash found for COPYING >>> host-libxml-parser-perl 2.44 Collecting legal info ERROR: No hash found for README >>> host-expat 2.2.6 Collecting legal info COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76) >>> libxml2 2.9.8 Collecting legal info COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd) >>> sqlite 3250200 Collecting legal info tea/license.terms: OK (sha256: 66e056b6e8687f32af30d5187611b98b12a8f46f07aaf62f43585f276e8f0ac9) >>> hwloc 1.11.7 Collecting legal info ERROR: No hash found for COPYING >>> leveldb v1.20 Collecting legal info ERROR: No hash found for LICENSE >>> snappy 1.1.7 Collecting legal info COPYING: OK (sha256: 55172044f7e241207117448a4d9d6ba1d0925c8ad66b5d4c08c70adfa9cc3de6) >>> host-cmake 3.8.2 Collecting legal info ERROR: No hash found for Copyright.txt >>> libogg 1.3.3 Collecting legal info COPYING: OK (sha256: d2ab5758336489da61c12cc5bb757da5339c4ae9001f9bb0562b4370249af814) >>> libsndfile 1.0.28 Collecting legal info ERROR: No hash found for COPYING >>> libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> ndisc6 1.0.3 Collecting legal info ERROR: No hash found for COPYING >>> odhcploc 20111021 Collecting legal info ERROR: No hash found for COPYING >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> pulseaudio 12.2 Collecting legal info LICENSE: OK (sha256: a1064b9838b6b4feee61eaeb0925da4b4834c984b77716558860c4294ed6c015) GPL: OK (sha256: c38aee9e3c8c4d5d594ff548a1be05453023016d6286931f6512db215ec1fd42) LGPL: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) >>> speex 1.2.0 Collecting legal info COPYING: OK (sha256: 671bb5d8fd3c6b05a2e831d90f978ac27965c92bd8ea6d16b3df76e3440c0e9f) >>> start-stop-daemon 1.18.10 Collecting legal info ERROR: No hash found for COPYING >>> tinymembench v0.4 Collecting legal info LICENSE: OK (sha256: 8ba473aced4630aee2808efe17b53e904a9d68a9b3361de491717f9a4e75da39) >>> ux500-firmware 1.1.3-6 Collecting legal info ERROR: No hash found for license.txt WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/run/instance-1/output/legal-info make: Leaving directory '/home/buildroot/autobuild/run/instance-1/buildroot'