/bin/sh ../../libtool --mode=install /usr/bin/install -c libtemplate.la '/home/autobuild/autobuild/instance-14/output-1/target/usr/lib' libtool: install: /usr/bin/install -c .libs/libtemplate.so.1.0.0 /home/autobuild/autobuild/instance-14/output-1/target/usr/lib/libtemplate.so.1.0.0 libtool: install: (cd /home/autobuild/autobuild/instance-14/output-1/target/usr/lib && { ln -s -f libtemplate.so.1.0.0 libtemplate.so.1 || { rm -f libtemplate.so.1 && ln -s libtemplate.so.1.0.0 libtemplate.so.1; }; }) libtool: install: (cd /home/autobuild/autobuild/instance-14/output-1/target/usr/lib && { ln -s -f libtemplate.so.1.0.0 libtemplate.so || { rm -f libtemplate.so && ln -s libtemplate.so.1.0.0 libtemplate.so; }; }) libtool: install: /usr/bin/install -c .libs/libtemplate.lai /home/autobuild/autobuild/instance-14/output-1/target/usr/lib/libtemplate.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/Drivers/template' make[3]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/Drivers/template' Making install in MiniSQL make[3]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/Drivers/MiniSQL' make[4]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/Drivers/MiniSQL' make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/Drivers/MiniSQL' make[3]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/Drivers/MiniSQL' Making install in nn make[3]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/Drivers/nn' make[4]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/Drivers/nn' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-14/output-1/target/usr/lib' /bin/sh ../../libtool --mode=install /usr/bin/install -c libnn.la '/home/autobuild/autobuild/instance-14/output-1/target/usr/lib' libtool: install: /usr/bin/install -c .libs/libnn.so.1.0.0 /home/autobuild/autobuild/instance-14/output-1/target/usr/lib/libnn.so.1.0.0 libtool: install: (cd /home/autobuild/autobuild/instance-14/output-1/target/usr/lib && { ln -s -f libnn.so.1.0.0 libnn.so.1 || { rm -f libnn.so.1 && ln -s libnn.so.1.0.0 libnn.so.1; }; }) libtool: install: (cd /home/autobuild/autobuild/instance-14/output-1/target/usr/lib && { ln -s -f libnn.so.1.0.0 libnn.so || { rm -f libnn.so && ln -s libnn.so.1.0.0 libnn.so; }; }) libtool: install: /usr/bin/install -c .libs/libnn.lai /home/autobuild/autobuild/instance-14/output-1/target/usr/lib/libnn.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/Drivers/nn' make[3]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/Drivers/nn' make[3]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/Drivers' make[4]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/Drivers' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/Drivers' make[3]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/Drivers' make[2]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/Drivers' Making install in include make[2]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/include' make[3]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/include' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-14/output-1/target/usr/include' /usr/bin/install -c -m 644 odbcinst.h odbcinstext.h sql.h sqlext.h sqltypes.h sqlucode.h sqlspi.h autotest.h uodbc_stats.h uodbc_extras.h '/home/autobuild/autobuild/instance-14/output-1/target/usr/include' make[3]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/include' make[2]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/include' Making install in doc make[2]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc' Making install in AdministratorManual make[3]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/AdministratorManual' make[4]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/AdministratorManual' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/AdministratorManual' make[3]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/AdministratorManual' Making install in ProgrammerManual make[3]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/ProgrammerManual' Making install in Tutorial make[4]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/ProgrammerManual/Tutorial' make[5]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/ProgrammerManual/Tutorial' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/ProgrammerManual/Tutorial' make[4]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/ProgrammerManual/Tutorial' make[4]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/ProgrammerManual' make[5]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/ProgrammerManual' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/ProgrammerManual' make[4]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/ProgrammerManual' make[3]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/ProgrammerManual' Making install in UserManual make[3]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/UserManual' make[4]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/UserManual' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/UserManual' make[3]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/UserManual' Making install in lst make[3]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/lst' make[4]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/lst' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/lst' make[3]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc/lst' make[3]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc' make[4]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc' make[3]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc' make[2]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/doc' Making install in man make[2]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/man' make[3]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/man' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-14/output-1/target/usr/share/man/man1' /usr/bin/install -c -m 644 isql.1 odbcinst.1 dltest.1 iusql.1 odbc_config.1 '/home/autobuild/autobuild/instance-14/output-1/target/usr/share/man/man1' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-14/output-1/target/usr/share/man/man5' /usr/bin/install -c -m 644 odbc.ini.5 odbcinst.ini.5 '/home/autobuild/autobuild/instance-14/output-1/target/usr/share/man/man5' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-14/output-1/target/usr/share/man/man7' /usr/bin/install -c -m 644 unixODBC.7 '/home/autobuild/autobuild/instance-14/output-1/target/usr/share/man/man7' make[3]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/man' make[2]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/man' Making install in samples make[2]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/samples' make[3]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/samples' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/samples' make[2]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12/samples' make[2]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12' make[3]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-14/output-1/target/usr/include' /usr/bin/install -c -m 644 unixodbc.h '/home/autobuild/autobuild/instance-14/output-1/target/usr/include' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-14/output-1/target/usr/lib/pkgconfig' /usr/bin/install -c -m 644 cur/odbccr.pc DriverManager/odbc.pc odbcinst/odbcinst.pc '/home/autobuild/autobuild/instance-14/output-1/target/usr/lib/pkgconfig' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-14/output-1/target/usr/include/unixODBC' /usr/bin/install -c -m 644 unixodbc_conf.h '/home/autobuild/autobuild/instance-14/output-1/target/usr/include/unixODBC' /home/autobuild/make/make install-data-hook make[4]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12' /usr/bin/mkdir -p /home/autobuild/autobuild/instance-14/output-1/target/etc/ODBCDataSources touch /home/autobuild/autobuild/instance-14/output-1/target/etc/odbcinst.ini touch /home/autobuild/autobuild/instance-14/output-1/target/etc/odbc.ini make[4]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12' make[3]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12' make[2]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12' make[1]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/unixodbc-2.3.12' >>> uredir 3.3 Downloading wget -nd -t 3 -O '/home/autobuild/autobuild/instance-14/output-1/build/.uredir-3.3.tar.gz.B6xtls/output' 'https://github.com/troglobit/uredir/releases/download/v3.3/uredir-3.3.tar.gz' --2024-06-06 00:22:02-- https://github.com/troglobit/uredir/releases/download/v3.3/uredir-3.3.tar.gz Loaded CA certificate '/etc/ssl/certs/ca-certificates.crt' Resolving github.com (github.com)... 140.82.113.3 Connecting to github.com (github.com)|140.82.113.3|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://objects.githubusercontent.com/github-production-release-asset-2e65be/56446159/b97a6500-862c-11e9-89e3-ca29c9443dcf?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=releaseassetproduction%2F20240606%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20240606T002202Z&X-Amz-Expires=300&X-Amz-Signature=6209713cfd4ce75777f6f2120de2cad2fb9e0328bee25188700ec8f2916371b1&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=56446159&response-content-disposition=attachment%3B%20filename%3Duredir-3.3.tar.gz&response-content-type=application%2Foctet-stream [following] --2024-06-06 00:22:02-- https://objects.githubusercontent.com/github-production-release-asset-2e65be/56446159/b97a6500-862c-11e9-89e3-ca29c9443dcf?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=releaseassetproduction%2F20240606%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20240606T002202Z&X-Amz-Expires=300&X-Amz-Signature=6209713cfd4ce75777f6f2120de2cad2fb9e0328bee25188700ec8f2916371b1&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=56446159&response-content-disposition=attachment%3B%20filename%3Duredir-3.3.tar.gz&response-content-type=application%2Foctet-stream Resolving objects.githubusercontent.com (objects.githubusercontent.com)... 185.199.110.133, 185.199.109.133, 185.199.108.133, ... Connecting to objects.githubusercontent.com (objects.githubusercontent.com)|185.199.110.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 93632 (91K) [application/octet-stream] Saving to: '/home/autobuild/autobuild/instance-14/output-1/build/.uredir-3.3.tar.gz.B6xtls/output' 0K .......... .......... .......... .......... .......... 54% 6.22M 0s 50K .......... .......... .......... .......... . 100% 9.93M=0.01s 2024-06-06 00:22:02 (7.49 MB/s) - '/home/autobuild/autobuild/instance-14/output-1/build/.uredir-3.3.tar.gz.B6xtls/output' saved [93632/93632] uredir-3.3.tar.gz: OK (md5: a42ee27e84de2e08e35ee733508bb6ea) >>> uredir 3.3 Extracting gzip -d -c /home/autobuild/autobuild/instance-14/dl/uredir/uredir-3.3.tar.gz | tar --strip-components=1 -C /home/autobuild/autobuild/instance-14/output-1/build/uredir-3.3 -xf - >>> uredir 3.3 Patching >>> uredir 3.3 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/autobuild/autobuild/instance-14/output-1/build/uredir-3.3 -name $file); do cp support/gnuconfig/$file $i; done; done >>> uredir 3.3 Patching libtool >>> uredir 3.3 Configuring (cd /home/autobuild/autobuild/instance-14/output-1/build/uredir-3.3/ && rm -rf config.cache && GIT_DIR=. PATH="/home/autobuild/autobuild/instance-14/output-1/host/bin:/home/autobuild/autobuild/instance-14/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" AR="/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-gcc-ar" AS="/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-as" LD="/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-ld" NM="/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-gcc-nm" CC="/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-gcc" GCC="/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-gcc" CPP="/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-cpp" CXX="/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-g++" FC="/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-gfortran" F77="/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-gfortran" RANLIB="/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-gcc-ranlib" READELF="/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-readelf" STRIP="/bin/true" OBJCOPY="/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-objcopy" OBJDUMP="/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/autobuild/autobuild/instance-14/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/autobuild/autobuild/instance-14/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/autobuild/autobuild/instance-14/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/autobuild/autobuild/instance-14/output-1/host/lib -Wl,-rpath,/home/autobuild/autobuild/instance-14/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-as" DEFAULT_LINKER="/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O1 -g0 -D_FORTIFY_SOURCE=1" CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O1 -g0 -D_FORTIFY_SOURCE=1" LDFLAGS="" FCFLAGS=" -O1 -g0" FFLAGS=" -O1 -g0" PKG_CONFIG="/home/autobuild/autobuild/instance-14/output-1/host/bin/pkg-config" STAGING_DIR="/home/autobuild/autobuild/instance-14/output-1/host/i686-buildroot-linux-gnu/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no ac_cv_lbl_unaligned_fail=no ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CONFIG_SITE=/dev/null ./configure --target=i686-buildroot-linux-gnu --host=i686-buildroot-linux-gnu --build=aarch64-unknown-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --disable-static, --enable-shared checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for i686-buildroot-linux-gnu-strip... /bin/true checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking for i686-buildroot-linux-gnu-gcc... /home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-gcc accepts -g... yes checking for /home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-gcc option to accept ISO C89... none needed checking whether /home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of /home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-gcc... none checking how to run the C preprocessor... /home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-cpp checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking pkg-config is at least version 0.9.0... yes checking for uev... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --disable-static, --enable-shared >>> uredir 3.3 Building GIT_DIR=. PATH="/home/autobuild/autobuild/instance-14/output-1/host/bin:/home/autobuild/autobuild/instance-14/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" /home/autobuild/make/make -j1 -C /home/autobuild/autobuild/instance-14/output-1/build/uredir-3.3/ make[1]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/uredir-3.3' /home/autobuild/make/make all-am make[2]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/uredir-3.3' CC uredir-uredir.o CC uredir-youdp.o CCLD uredir make[2]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/uredir-3.3' make[1]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/uredir-3.3' >>> uredir 3.3 Installing to target GIT_DIR=. PATH="/home/autobuild/autobuild/instance-14/output-1/host/bin:/home/autobuild/autobuild/instance-14/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" /home/autobuild/make/make -j1 DESTDIR=/home/autobuild/autobuild/instance-14/output-1/target install -C /home/autobuild/autobuild/instance-14/output-1/build/uredir-3.3/ make[1]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/uredir-3.3' make[2]: Entering directory '/home/autobuild/autobuild/instance-14/output-1/build/uredir-3.3' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-14/output-1/target/usr/bin' /usr/bin/install -c uredir '/home/autobuild/autobuild/instance-14/output-1/target/usr/bin' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-14/output-1/target/usr/share/doc/uredir' /usr/bin/install -c -m 644 README.md LICENSE '/home/autobuild/autobuild/instance-14/output-1/target/usr/share/doc/uredir' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-14/output-1/target/usr/share/man/man1' /usr/bin/install -c -m 644 uredir.1 '/home/autobuild/autobuild/instance-14/output-1/target/usr/share/man/man1' make[2]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/uredir-3.3' make[1]: Leaving directory '/home/autobuild/autobuild/instance-14/output-1/build/uredir-3.3' >>> wilink-bt-firmware 43fca73c6a98c63fcb98f82af5bf83761778e005 Downloading GIT_DIR=/home/autobuild/autobuild/instance-14/dl/wilink-bt-firmware/git/.git git init . hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /home/autobuild/autobuild/instance-14/dl/wilink-bt-firmware/git/.git/ GIT_DIR=/home/autobuild/autobuild/instance-14/dl/wilink-bt-firmware/git/.git git remote add origin 'https://git.ti.com/git/ti-bt/service-packs.git' GIT_DIR=/home/autobuild/autobuild/instance-14/dl/wilink-bt-firmware/git/.git git remote set-url origin 'https://git.ti.com/git/ti-bt/service-packs.git' Fetching all references GIT_DIR=/home/autobuild/autobuild/instance-14/dl/wilink-bt-firmware/git/.git git fetch origin From https://git.ti.com/git/ti-bt/service-packs * [new branch] master -> origin/master GIT_DIR=/home/autobuild/autobuild/instance-14/dl/wilink-bt-firmware/git/.git git fetch origin -t -f GIT_DIR=/home/autobuild/autobuild/instance-14/dl/wilink-bt-firmware/git/.git git submodule --quiet foreach 'printf "Deregistering submodule \"%s\"\n" "${path}" && cd .. && rm -rf "${path##*/}"' GIT_DIR=/home/autobuild/autobuild/instance-14/dl/wilink-bt-firmware/git/.git git checkout -f -q '43fca73c6a98c63fcb98f82af5bf83761778e005' warning: refname '43fca73c6a98c63fcb98f82af5bf83761778e005' is ambiguous. Git normally never creates a ref that ends with 40 hex characters because it will be ignored when you just specify 40-hex. These refs may be created by mistake. For example, git switch -c $br $(git rev-parse ...) where "$br" is somehow empty and a 40-hex ref is created. Please examine these refs and maybe delete them. Turn this message off by running "git config advice.objectNameWarning false" GIT_DIR=/home/autobuild/autobuild/instance-14/dl/wilink-bt-firmware/git/.git git clean -ffdx wilink-bt-firmware-43fca73c6a98c63fcb98f82af5bf83761778e005-git4.tar.gz: OK (sha256: 74e5c8912f1a7e65799da5f3ad44fda570446af2c7324f3a8051a166065b643b) >>> wilink-bt-firmware 43fca73c6a98c63fcb98f82af5bf83761778e005 Extracting gzip -d -c /home/autobuild/autobuild/instance-14/dl/wilink-bt-firmware/wilink-bt-firmware-43fca73c6a98c63fcb98f82af5bf83761778e005-git4.tar.gz | tar --strip-components=1 -C /home/autobuild/autobuild/instance-14/output-1/build/wilink-bt-firmware-43fca73c6a98c63fcb98f82af5bf83761778e005 -xf - >>> wilink-bt-firmware 43fca73c6a98c63fcb98f82af5bf83761778e005 Patching >>> wilink-bt-firmware 43fca73c6a98c63fcb98f82af5bf83761778e005 Configuring >>> wilink-bt-firmware 43fca73c6a98c63fcb98f82af5bf83761778e005 Building >>> wilink-bt-firmware 43fca73c6a98c63fcb98f82af5bf83761778e005 Installing to target mkdir -p /home/autobuild/autobuild/instance-14/output-1/target/lib/firmware/ti-connectivity cp /home/autobuild/autobuild/instance-14/output-1/build/wilink-bt-firmware-43fca73c6a98c63fcb98f82af5bf83761778e005/initscripts/TIInit_*.bts /home/autobuild/autobuild/instance-14/output-1/target/lib/firmware/ti-connectivity >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/autobuild/autobuild/instance-14/output-1/host/etc/meson sed -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O1', '-g0', '-D_FORTIFY_SOURCE=1'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_LDFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O1', '-g0', '-D_FORTIFY_SOURCE=1'@PKG_TARGET_CXXFLAGS@%g" -e "s%@TARGET_FCFLAGS@%'-O1', '-g0'@PKG_TARGET_FCFLAGS@%g" -e "s%@TARGET_CC@%/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-gcc%g" -e "s%@TARGET_CXX@%/bin/false%g" -e "s%@TARGET_AR@%/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-gcc-ar%g" -e "s%@TARGET_FC@%/bin/false%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%x86%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%little%g" -e "s%@TARGET_FCFLAGS@%%g" -e "s%@TARGET_CFLAGS@%%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%%g" -e "s%@BR2_CMAKE@%/home/autobuild/autobuild/instance-14/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/autobuild/autobuild/instance-14/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/autobuild/autobuild/instance-14/output-1/host%g" -e "s%@STAGING_DIR@%/home/autobuild/autobuild/instance-14/output-1/host/i686-buildroot-linux-gnu/sysroot%g" -e "s%@STATIC@%false%g" /home/autobuild/autobuild/instance-14/buildroot/support/misc/cross-compilation.conf.in > /home/autobuild/autobuild/instance-14/output-1/host/etc/meson/cross-compilation.conf.in sed -e "s%@TARGET_CC@%/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-gcc%g" -e "s%@TARGET_CXX@%/bin/false%g" -e "s%@TARGET_AR@%/home/autobuild/autobuild/instance-14/output-1/host/bin/i686-buildroot-linux-gnu-gcc-ar%g" -e "s%@TARGET_FC@%/bin/false%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%x86%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%little%g" -e "s%@TARGET_FCFLAGS@%'-O1', '-g0'%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O1', '-g0', '-D_FORTIFY_SOURCE=1'%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O1', '-g0', '-D_FORTIFY_SOURCE=1'%g" -e "s%@BR2_CMAKE@%/home/autobuild/autobuild/instance-14/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/autobuild/autobuild/instance-14/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/autobuild/autobuild/instance-14/output-1/host%g" -e "s%@STAGING_DIR@%/home/autobuild/autobuild/instance-14/output-1/host/i686-buildroot-linux-gnu/sysroot%g" -e "s%@STATIC@%false%g" /home/autobuild/autobuild/instance-14/buildroot/support/misc/cross-compilation.conf.in > /home/autobuild/autobuild/instance-14/output-1/host/etc/meson/cross-compilation.conf if grep -q CONFIG_ASH=y /home/autobuild/autobuild/instance-14/output-1/build/busybox-1.36.1/.config; then grep -qsE '^/bin/ash$' /home/autobuild/autobuild/instance-14/output-1/target/etc/shells || echo "/bin/ash" >> /home/autobuild/autobuild/instance-14/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/autobuild/autobuild/instance-14/output-1/build/busybox-1.36.1/.config; then grep -qsE '^/bin/hush$' /home/autobuild/autobuild/instance-14/output-1/target/etc/shells || echo "/bin/hush" >> /home/autobuild/autobuild/instance-14/output-1/target/etc/shells; fi mkdir -p /home/autobuild/autobuild/instance-14/output-1/target/etc echo "buildroot" > /home/autobuild/autobuild/instance-14/output-1/target/etc/hostname /usr/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/autobuild/autobuild/instance-14/output-1/target/etc/hosts mkdir -p /home/autobuild/autobuild/instance-14/output-1/target/etc echo "Welcome to Buildroot" > /home/autobuild/autobuild/instance-14/output-1/target/etc/issue /usr/bin/sed -i -e s,^root:[^:]*:,root:"*":, /home/autobuild/autobuild/instance-14/output-1/target/etc/shadow grep -qsE '^/bin/sh$' /home/autobuild/autobuild/instance-14/output-1/target/etc/shells || echo "/bin/sh" >> /home/autobuild/autobuild/instance-14/output-1/target/etc/shells rm -rf /home/autobuild/autobuild/instance-14/output-1/target/usr/include /home/autobuild/autobuild/instance-14/output-1/target/usr/share/aclocal \ /home/autobuild/autobuild/instance-14/output-1/target/usr/lib/pkgconfig /home/autobuild/autobuild/instance-14/output-1/target/usr/share/pkgconfig \ /home/autobuild/autobuild/instance-14/output-1/target/usr/lib/cmake /home/autobuild/autobuild/instance-14/output-1/target/usr/share/cmake \ /home/autobuild/autobuild/instance-14/output-1/target/usr/lib/rpm /home/autobuild/autobuild/instance-14/output-1/target/usr/doc find /home/autobuild/autobuild/instance-14/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/autobuild/autobuild/instance-14/output-1/target/lib/ /home/autobuild/autobuild/instance-14/output-1/target/usr/lib/ /home/autobuild/autobuild/instance-14/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f find: '/home/autobuild/autobuild/instance-14/output-1/target/usr/libexec/': No such file or directory rm -rf /home/autobuild/autobuild/instance-14/output-1/target/usr/share/gdb rm -rf /home/autobuild/autobuild/instance-14/output-1/target/usr/share/bash-completion rm -rf /home/autobuild/autobuild/instance-14/output-1/target/etc/bash_completion.d rm -rf /home/autobuild/autobuild/instance-14/output-1/target/usr/share/zsh rm -rf /home/autobuild/autobuild/instance-14/output-1/target/usr/man /home/autobuild/autobuild/instance-14/output-1/target/usr/share/man rm -rf /home/autobuild/autobuild/instance-14/output-1/target/usr/info /home/autobuild/autobuild/instance-14/output-1/target/usr/share/info rm -rf /home/autobuild/autobuild/instance-14/output-1/target/usr/doc /home/autobuild/autobuild/instance-14/output-1/target/usr/share/doc rm -rf /home/autobuild/autobuild/instance-14/output-1/target/usr/share/gtk-doc rmdir /home/autobuild/autobuild/instance-14/output-1/target/usr/share 2>/dev/null || true rm -rf /home/autobuild/autobuild/instance-14/output-1/target/lib/debug /home/autobuild/autobuild/instance-14/output-1/target/usr/lib/debug find /home/autobuild/autobuild/instance-14/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /bin/true 2>/dev/null || true find /home/autobuild/autobuild/instance-14/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /bin/true 2>/dev/null || true test -f /home/autobuild/autobuild/instance-14/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/autobuild/autobuild/instance-14/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/autobuild/autobuild/instance-14/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2024.05-rc2-8-gba19e5162e"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2024.05-rc2"; \ echo "PRETTY_NAME=\"Buildroot 2024.05-rc2\"" \ ) > /home/autobuild/autobuild/instance-14/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/autobuild/autobuild/instance-14/output-1/target/etc >>> Sanitizing RPATH in target tree PARALLEL_JOBS=1 \ PER_PACKAGE_DIR=/home/autobuild/autobuild/instance-14/output-1/per-package \ /home/autobuild/autobuild/instance-14/buildroot/support/scripts/fix-rpath target touch /home/autobuild/autobuild/instance-14/output-1/target/usr ln -snf /home/autobuild/autobuild/instance-14/output-1/host/i686-buildroot-linux-gnu/sysroot /home/autobuild/autobuild/instance-14/output-1/staging make: Leaving directory '/home/autobuild/autobuild/instance-14/buildroot' make: Entering directory '/home/autobuild/autobuild/instance-14/buildroot' >>> Buildroot 2024.05-rc2-8-gba19e5162e Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-buildroot Collecting legal info >>> gcc-final 13.3.0 Collecting legal info COPYING.RUNTIME: OK (sha256: 9d6b43ce4d8de0c878bf16b54d8e7a10d9bd42b75178153e3af6a815bdc90f74) >>> host-gcc-final 13.3.0 Collecting legal info COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c) COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) COPYING3.LIB: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) >>> glibc 2.39-5-ge0910f1d3278f05439fb434ee528fc9be1b6bd5e Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) LICENSES: OK (sha256: bba29819a3e938fae92674d6a88533e10605e389da8b51cdcba0a94f6221c5bc) >>> host-bison 3.8.2 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-m4 1.4.19 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-skeleton Collecting legal info >>> host-gawk 5.3.0 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-gcc-initial 13.3.0 Collecting legal info COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c) COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) COPYING3.LIB: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) >>> host-binutils 2.41 Collecting legal info COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: 56bdea73b6145ef6ac5259b3da390b981d840c24cb03b8e1cbc678de7ecfa18d) >>> host-gmp 6.3.0 Collecting legal info COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-mpc 1.3.1 Collecting legal info COPYING.LESSER: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) >>> host-mpfr 4.1.1 Collecting legal info COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118) >>> linux-headers 6.8.12 Collecting legal info COPYING: OK (sha256: fb5a425bd3b3cd6071a3a9aff9909a859e7c1158d54d32e07658398cd67eb6a0) LICENSES/preferred/GPL-2.0: OK (sha256: f6b78c087c3ebdf0f3c13415070dd480a3f35d8fc76f3d02180a407c1c812f79) LICENSES/exceptions/Linux-syscall-note: OK (sha256: 8e378ab93586eb55135d3bc119cce787f7324f48394777d00c34fa3d0be3303f) >>> skeleton Collecting legal info >>> skeleton-init-none Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain Collecting legal info >>> babeld 1.9.2 Collecting legal info LICENCE: OK (sha256: b415c41292cedef6c97b243609e50552887c29343566c639f23282d31efd2afd) >>> busybox 1.36.1 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f) >>> chartjs 3.9.1 Collecting legal info ERROR: No hash found for LICENSE.md >>> host-checkpolicy 3.6 Collecting legal info LICENSE: OK (sha256: 204d8eff92f95aac4df6c8122bc1505f468f3a901e5a4cc08940e0ede1938994) >>> host-flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> host-autoconf 2.72 Collecting legal info COPYINGv3: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) COPYING.EXCEPTION: OK (sha256: 1f1cde9fb68b9b3cff18c420894bec5bd4defacd700b7d13df54a887301e5350) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-automake 1.16.5 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-gettext Collecting legal info >>> host-gettext-tiny 0.3.2 Collecting legal info LICENSE: OK (sha256: 4c938aa3d8fa3c184bba5e87a8a2febc89560627c9d0567536879e3eca1a7b4f) extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> host-libselinux 3.6 Collecting legal info LICENSE: OK (sha256: 86657b4c0fe868d7cbd977cb04c63b6c667e08fa51595a7bc846ad4bed8fc364) >>> host-libsepol 3.6 Collecting legal info LICENSE: OK (sha256: 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3) >>> host-pcre2 10.43 Collecting legal info LICENCE: OK (sha256: 030087e2e8dd7c1bdd26057d25d4ded8f45bbf01ad458d68665ad04b8b0fbedf) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> host-python-pip 23.3.2 Collecting legal info LICENSE.txt: OK (sha256: 634300a669d49aeae65b12c6c48c924c51a4cdf3d1ff086dc3456dc8bcaa2104) >>> host-python-installer 0.7.0 Collecting legal info LICENSE: OK (sha256: 37b8b9f2569892fa54406383d431169dbb2115980d78b7efba6eeae5664c484f) >>> host-python-flit-core 3.9.0 Collecting legal info LICENSE: OK (sha256: 35b4f1dec512e617077fd6980dbb43ef8c2887adc5d0185edb4c04da175dd816) >>> host-python3 3.11.8 Collecting legal info LICENSE: OK (sha256: 3b2f81fe21d181c499c59a256c8e1968455d6689d269aa85373bfb6af41da3bf) >>> host-autoconf-archive 2023.02.20 Collecting legal info COPYING: OK (sha256: e6037104443f9a7829b2aa7c5370d0789a7bda3ca65a0b904cdc0c2e285d9195) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-expat 2.6.2 Collecting legal info COPYING: OK (sha256: 122f2c27000472a201d337b9b31f7eb2b52d091b02857061a8880371612d9534) >>> host-libffi 3.4.6 Collecting legal info LICENSE: OK (sha256: 67894089811f93fca47a76f85e017da6f8582d4ba0905963c6e0f1ad6df7a195) >>> host-zlib Collecting legal info >>> host-libzlib 1.3.1 Collecting legal info LICENSE: OK (sha256: 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243) >>> host-python-pypa-build 1.0.3 Collecting legal info LICENSE: OK (sha256: aaf9a29ca5907971ccf07de025375db34539a8d5eeebce20b46099805722106f) >>> host-python-packaging 24.0 Collecting legal info LICENSE: OK (sha256: cad1ef5bd340d73e074ba614d26f7deaca5c7940c3d8c34852e65c4909686c48) LICENSE.APACHE: OK (sha256: 0d542e0c8804e39aa7f37eb00da5a762149dc682d7829451287e11b938e94594) LICENSE.BSD: OK (sha256: b70e7e9b742f1cc6f948b34c16aa39ffece94196364bc88ff0d2180f0028fac5) >>> host-python-pyproject-hooks 1.0.0 Collecting legal info LICENSE: OK (sha256: 1b22b049b5267d6dfc23a67bf4a84d8ec04b9fdfb1a51d360e42b4342c8b4154) >>> host-python-setuptools 69.2.0 Collecting legal info LICENSE: OK (sha256: 86da0f01aeae46348a3c3d465195dc1ceccde79f79e87769a64b8da04b2a4741) >>> host-python-wheel 0.40.0 Collecting legal info LICENSE.txt: OK (sha256: 30c23618679108f3e8ea1d2a658c7ca417bdfc891c98ef1a89fa4ff0c9828654) >>> host-swig 4.1.1 Collecting legal info LICENSE: OK (sha256: f53abaeed775018d519a1b9615f0ca17894772bd9ca21c2a156bf340ac41c13e) LICENSE-GPL: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) LICENSE-UNIVERSITIES: OK (sha256: 7f50d942373a871211c5efee03f3db2f9efd1cff1002b0ef8e3748baa611a5c2) >>> host-dfu-util 0.11 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> host-libusb 1.0.27 Collecting legal info COPYING: OK (sha256: 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a) >>> duktape 2.7.0 Collecting legal info LICENSE.txt: OK (sha256: c6b6659630ca6cb837afe982ecc79511bfca878b56296d628b02eb6f18789c29) >>> evtest 1.35 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> fping 5.1 Collecting legal info COPYING: OK (sha256: 6051b27e4b4a648f7bc8b329024da53a6e95ce88fcf0ccc259c371a74b741757) >>> gsl 2.7.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> libao 1.2.0 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> libcdaudio 0.99.12p2 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> libpcap 1.10.4 Collecting legal info LICENSE: OK (sha256: 8a54594d257e14a5260ac770f1633516cb51e3fc28c40136ce2697014eda7afd) >>> libsilk 4268a02240c35c6055b0f237c46b09b2dcf79e45 Collecting legal info COPYING: OK (sha256: 62a5963f034024665641f4a9888b208f1e39aa7e29e87c9634fdcf07d3073baf) >>> libsolv 0.7.25 Collecting legal info LICENSE.BSD: OK (sha256: 57f15acfb29fbef7749779e096a5885c60b716633e34484a21bb717554c0198f) >>> host-cmake 3.28.3 Collecting legal info Copyright.txt: OK (sha256: 4a01ccf2dc580ba570d02bc015bbe0ec92f1f318717aae9540ba841ba7946756) >>> zlib Collecting legal info >>> zlib-ng 2.1.6 Collecting legal info LICENSE.md: OK (sha256: d3c80be055d94d798eaa786116e84fa0b010bc11420b5d2060d978ea77845436) >>> libuev 2.4.1 Collecting legal info LICENSE: OK (sha256: 387d0d8e2aabf187751c8f1ebb9a4abaecaa7e0e05fead27f408193a0f0f17dd) >>> matio 1.5.26 Collecting legal info COPYING: OK (sha256: b3da766592f242fd5cdd4dfd15ac5e6119e88fd6844c3c0e7acb8ad3178280a3) >>> host-microchip-hss-payload-generator 2023.09 Collecting legal info tools/hss-payload-generator/LICENSE.md: OK (sha256: 0b67b1d44bcad078580fc5d8e9580a48a9466b769db58aeb1631d4c5ef97e08a) >>> host-elfutils 0.189 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING-GPLV2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING-LGPLV3: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) >>> host-bzip2 1.0.8 Collecting legal info LICENSE: OK (sha256: c6dbbf828498be844a89eaa3b84adbab3199e342eb5cb2ed2f0d4ba7ec0f38a3) >>> host-xz 5.4.6 Collecting legal info COPYING: OK (sha256: 29a1e305b2e34eefe5d4602d00cde1d528b71c5d9f2eec5106972cf6ddb6f73f) COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.GPLv3: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-libyaml 0.2.5 Collecting legal info License: OK (sha256: c40112449f254b9753045925248313e9270efa36d226b22d82d4cc6c43c57f29) >>> host-openssl Collecting legal info >>> host-libopenssl 3.3.0 Collecting legal info LICENSE.txt: OK (sha256: 7d5450cb2d142651b8afa315b5f238efc805dad827d91ba367d8516bc9d49e7a) >>> host-mtools 4.0.43 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-lzip 1.23 Collecting legal info COPYING: OK (sha256: 3d77c1a58fbde5ddba612d1fe09965e20a3804953eca12e8c1892298bb8a5eef) >>> ncurses 6.4-20230603 Collecting legal info COPYING: OK (sha256: 0413b2f4ea863194c174673032f0fca84f1ea1ed4eed6476baea68c075a631ce) >>> host-ncurses 6.4-20230603 Collecting legal info COPYING: OK (sha256: 0413b2f4ea863194c174673032f0fca84f1ea1ed4eed6476baea68c075a631ce) >>> odroidc2-firmware s905_6.0.1_v5.5 Collecting legal info >>> open-plc-utils 1ba7d5a042e4e8ff6858b08e113eec5dc4e89cf2 Collecting legal info LICENSE: OK (sha256: 3137c632bbcec5e88b72dc13f4fe06ee184eea364fec8f7494bdfa57672ef921) >>> host-patchelf 0.13 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> ptpd 1.1.0 Collecting legal info COPYRIGHT: OK (sha256: be69f30947abef91e0bce161005fe56b116b770e459e3e6980279349de47c366) >>> host-python-greenlet 3.0.3 Collecting legal info LICENSE: OK (sha256: 769831d6e5dfaf2c20802faccff1fafb4c2025dd8f6253dfa47fcad59d4d0979) LICENSE.PSF: OK (sha256: e5ff3c23c110e494cd7d736c10fd96d462457bafeca310840db6527298c7d46b) >>> setserial 2.17 Collecting legal info debian/copyright: OK (sha256: 1d7e810ed28daf370def626dfd4c502f2f77d2b678f1ac72e2ba675dd6f9af0d) >>> sshpass 1.10 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> statserial 1.1 Collecting legal info COPYING: OK (sha256: 91df39d1816bfb17a4dda2d3d2c83b1f6f2d38d53e53e41e8f97ad5ac46a0cad) >>> unixodbc 2.3.12 Collecting legal info COPYING: OK (sha256: a6b9aa1e9bfade121164c06fd975e9b913a8e38bf33d25ff967dfa3ed07d12f8) exe/COPYING: OK (sha256: 1e594f4c7fd6d099eca4bd1340b39d871ce0298331d8ebd4b68935548ee45cf4) >>> uredir 3.3 Collecting legal info LICENSE: OK (sha256: e4b8fd3375ce44e5e03be199724a8785510ea5fa58ed92a7a34fd0ccbd35db10) >>> wilink-bt-firmware 43fca73c6a98c63fcb98f82af5bf83761778e005 Collecting legal info LICENSE: OK (sha256: 21fd99ce784dc33b39ec0b4a383a9a9b8dafea261d73ad4548683c4eecd87f37) WARNING: the Buildroot source code has not been saved WARNING: odroidc2-firmware-s905_6.0.1_v5.5: cannot save license (ODROIDC2_FIRMWARE_LICENSE_FILES not defined) Legal info produced in /home/autobuild/autobuild/instance-14/output-1/legal-info make: Leaving directory '/home/autobuild/autobuild/instance-14/buildroot'