make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/lib' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/lib' /bin/bash ../libtool --mode=install /usr/bin/install -c libsgutils2.la '/home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/lib' libtool: install: /usr/bin/install -c .libs/libsgutils2-1.45.so.2.0.0 /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/lib/libsgutils2-1.45.so.2.0.0 libtool: install: (cd /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/lib && { ln -s -f libsgutils2-1.45.so.2.0.0 libsgutils2-1.45.so.2 || { rm -f libsgutils2-1.45.so.2 && ln -s libsgutils2-1.45.so.2.0.0 libsgutils2-1.45.so.2; }; }) libtool: install: (cd /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/lib && { ln -s -f libsgutils2-1.45.so.2.0.0 libsgutils2.so || { rm -f libsgutils2.so && ln -s libsgutils2-1.45.so.2.0.0 libsgutils2.so; }; }) libtool: install: /usr/bin/install -c .libs/libsgutils2.lai /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/lib/libsgutils2.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/lib' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/lib' Making install in src make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/src' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/src' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c sg_bg_ctl sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_elem_status sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_seek sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_stream_ctl sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_write_x sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin' libtool: install: /usr/bin/install -c sg_bg_ctl /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_bg_ctl libtool: install: /usr/bin/install -c sg_compare_and_write /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_compare_and_write libtool: install: /usr/bin/install -c sg_decode_sense /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_decode_sense libtool: install: /usr/bin/install -c sg_format /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_format libtool: install: /usr/bin/install -c sg_get_config /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_get_config libtool: install: /usr/bin/install -c sg_get_elem_status /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_get_elem_status libtool: install: /usr/bin/install -c sg_get_lba_status /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_get_lba_status libtool: install: /usr/bin/install -c sg_ident /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_ident libtool: install: /usr/bin/install -c sg_inq /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_inq libtool: install: /usr/bin/install -c sg_logs /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_logs libtool: install: /usr/bin/install -c sg_luns /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_luns libtool: install: /usr/bin/install -c sg_modes /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rep_zones /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_identify /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_seek /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_seek libtool: install: /usr/bin/install -c sg_senddiag /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_stpg libtool: install: /usr/bin/install -c sg_stream_ctl /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_stream_ctl libtool: install: /usr/bin/install -c sg_sync /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_buffer /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_write_x /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_write_x libtool: install: /usr/bin/install -c sg_zone /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_zone libtool: install: /usr/bin/install -c sg_copy_results /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/sgp_dd make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/src' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/src' Making install in doc make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/doc' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_elem_status.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 '/home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/share/man/man8' /usr/bin/install -c -m 644 sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/share/man/man8' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/doc' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/doc' Making install in scripts make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/scripts' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/scripts' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/scripts' make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45' make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45' >>> sg3_utils 1.45 Fixing libtool files for la in $(find /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/autobuild/instance-1/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot:@STAGING_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/autobuild/instance-1/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> sg3_utils 1.45 Installing to target PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-1/output-1/target install -C /home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/ make[1]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45' Making install in include make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/include' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/include' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/include/scsi' /usr/bin/install -c -m 644 sg_lib.h sg_lib_data.h sg_cmds.h sg_cmds_basic.h sg_cmds_extra.h sg_cmds_mmc.h sg_pr2serr.h sg_unaligned.h sg_pt.h sg_pt_nvme.h sg_linux_inc.h sg_io_linux.h sg_pt_linux.h '/home/buildroot/autobuild/instance-1/output-1/target/usr/include/scsi' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/include' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/include' Making install in lib make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/lib' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/lib' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/lib' /bin/bash ../libtool --mode=install /usr/bin/install -c libsgutils2.la '/home/buildroot/autobuild/instance-1/output-1/target/usr/lib' libtool: install: /usr/bin/install -c .libs/libsgutils2-1.45.so.2.0.0 /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/libsgutils2-1.45.so.2.0.0 libtool: install: (cd /home/buildroot/autobuild/instance-1/output-1/target/usr/lib && { ln -s -f libsgutils2-1.45.so.2.0.0 libsgutils2-1.45.so.2 || { rm -f libsgutils2-1.45.so.2 && ln -s libsgutils2-1.45.so.2.0.0 libsgutils2-1.45.so.2; }; }) libtool: install: (cd /home/buildroot/autobuild/instance-1/output-1/target/usr/lib && { ln -s -f libsgutils2-1.45.so.2.0.0 libsgutils2.so || { rm -f libsgutils2.so && ln -s libsgutils2-1.45.so.2.0.0 libsgutils2.so; }; }) libtool: install: /usr/bin/install -c .libs/libsgutils2.lai /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/libsgutils2.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/lib' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/lib' Making install in src make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/src' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/src' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c sg_bg_ctl sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_elem_status sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_seek sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_stream_ctl sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_write_x sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' libtool: install: /usr/bin/install -c sg_bg_ctl /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_bg_ctl libtool: install: /usr/bin/install -c sg_compare_and_write /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_compare_and_write libtool: install: /usr/bin/install -c sg_decode_sense /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_decode_sense libtool: install: /usr/bin/install -c sg_format /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_format libtool: install: /usr/bin/install -c sg_get_config /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_get_config libtool: install: /usr/bin/install -c sg_get_elem_status /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_get_elem_status libtool: install: /usr/bin/install -c sg_get_lba_status /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_get_lba_status libtool: install: /usr/bin/install -c sg_ident /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_ident libtool: install: /usr/bin/install -c sg_inq /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_inq libtool: install: /usr/bin/install -c sg_logs /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_logs libtool: install: /usr/bin/install -c sg_luns /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_luns libtool: install: /usr/bin/install -c sg_modes /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rep_zones /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_identify /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_seek /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_seek libtool: install: /usr/bin/install -c sg_senddiag /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_stpg libtool: install: /usr/bin/install -c sg_stream_ctl /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_stream_ctl libtool: install: /usr/bin/install -c sg_sync /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_buffer /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_write_x /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_write_x libtool: install: /usr/bin/install -c sg_zone /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_zone libtool: install: /usr/bin/install -c sg_copy_results /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sgp_dd make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/src' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/src' Making install in doc make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/doc' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_elem_status.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man8' /usr/bin/install -c -m 644 sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man8' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/doc' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/doc' Making install in scripts make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/scripts' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/scripts' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45/scripts' make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45' make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/sg3_utils-1.45' for prog in compare_and_write copy_results dd decode_sense emc_trespass format get_config get_lba_status ident inq logs luns map26 map sgm_dd modes opcodes sgp_dd persist prevent raw rbuf rdac read readcap read_block_limits read_attr read_buffer read_long reassign referrals rep_zones requests reset reset_wp rmsn rtpg safte sanitize sat_identify sat_phy_event sat_read_gplog sat_set_features scan senddiag ses ses_microcode start stpg sync test_rwbuf timestamp turs unmap verify vpd write_buffer write_long write_same write_verify wr_mode xcopy zone; do rm -f /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/sg_${prog} ; done for prog in logging_level mandat readcap ready satl start stop temperature; do rm -f /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/scsi_${prog} ; done for prog in sginfo sgm_dd sgp_dd; do rm -f /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/${prog}; done v14.1_Firmware.zip: OK (sha256: a2e7a327dd545ba2051946f7613005cbde88fdd952afb8eecdd1dacda7e767d2) >>> wilc1000-firmware 14.1 Extracting /usr/bin/unzip -q -d /home/buildroot/autobuild/instance-1/output-1/build /home/buildroot/autobuild/instance-1/dl/wilc1000-firmware/v14.1_Firmware.zip mv /home/buildroot/autobuild/instance-1/output-1/build/wireless-firmware-14.1_Firmware/* /home/buildroot/autobuild/instance-1/output-1/build/wilc1000-firmware-14.1 rmdir /home/buildroot/autobuild/instance-1/output-1/build/wireless-firmware-14.1_Firmware >>> wilc1000-firmware 14.1 Patching >>> wilc1000-firmware 14.1 Configuring >>> wilc1000-firmware 14.1 Building >>> wilc1000-firmware 14.1 Installing to target /usr/bin/install -D -m 0644 /home/buildroot/autobuild/instance-1/output-1/build/wilc1000-firmware-14.1/wilc1003_firmware.bin /home/buildroot/autobuild/instance-1/output-1/target/lib/firmware/atmel/wilc1003_firmware.bin >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/buildroot/autobuild/instance-1/output-1/host/etc/meson sed -e 's%@TARGET_CROSS@%/home/buildroot/autobuild/instance-1/output-1/host/bin/nios2-linux-gnu-%g' -e 's%@TARGET_ARCH@%nios2%g' -e 's%@TARGET_CPU@%%g' -e 's%@TARGET_ENDIAN@%little%g' -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os', '-g0', '-D_FORTIFY_SOURCE=1'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os', '-g0', '-D_FORTIFY_SOURCE=1'@PKG_TARGET_CFLAGS@%g" -e 's%@HOST_DIR@%/home/buildroot/autobuild/instance-1/output-1/host%g' -e 's%@STAGING_DIR@%/home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot%g' -e 's%@STATIC@%false%g' package/meson//cross-compilation.conf.in > /home/buildroot/autobuild/instance-1/output-1/host/etc/meson/cross-compilation.conf.in sed -e 's%@PKG_TARGET_CFLAGS@%%g' -e 's%@PKG_TARGET_LDFLAGS@%%g' -e 's%@PKG_TARGET_CXXFLAGS@%%g' /home/buildroot/autobuild/instance-1/output-1/host/etc/meson/cross-compilation.conf.in > /home/buildroot/autobuild/instance-1/output-1/host/etc/meson/cross-compilation.conf /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/buildroot/autobuild/instance-1/output-1/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/autobuild/instance-1/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /home/buildroot/autobuild/instance-1/output-1/build/busybox-1.33.1/.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/instance-1/output-1/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/instance-1/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/buildroot/autobuild/instance-1/output-1/build/busybox-1.33.1/.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/instance-1/output-1/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/instance-1/output-1/target/etc/shells; fi rm -f /home/buildroot/autobuild/instance-1/output-1/target/usr/share/glib-2.0/schemas/*.xml /home/buildroot/autobuild/instance-1/output-1/target/usr/share/glib-2.0/schemas/*.dtd /home/buildroot/autobuild/instance-1/output-1/host/bin/glib-compile-schemas /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/share/glib-2.0/schemas --targetdir=/home/buildroot/autobuild/instance-1/output-1/target/usr/share/glib-2.0/schemas No schema files found: doing nothing. mkdir -p /home/buildroot/autobuild/instance-1/output-1/target/etc echo "buildroot" > /home/buildroot/autobuild/instance-1/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/instance-1/output-1/target/etc/hosts mkdir -p /home/buildroot/autobuild/instance-1/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/instance-1/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/instance-1/output-1/target/etc/shadow rm -f /home/buildroot/autobuild/instance-1/output-1/target/bin/sh if [ -x /home/buildroot/autobuild/instance-1/output-1/target/sbin/swapon -a -x /home/buildroot/autobuild/instance-1/output-1/target/sbin/swapoff ]; then /bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/buildroot/autobuild/instance-1/output-1/target/etc/inittab; else /bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/buildroot/autobuild/instance-1/output-1/target/etc/inittab; fi printf '%s\n' C en_US locale-archive > /home/buildroot/autobuild/instance-1/output-1/build/locales.nopurge for dir in /home/buildroot/autobuild/instance-1/output-1/target/usr/share/locale /home/buildroot/autobuild/instance-1/output-1/target/usr/share/X11/locale /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/instance-1/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/autobuild/instance-1/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/instance-1/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/instance-1/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/include /home/buildroot/autobuild/instance-1/output-1/target/usr/share/aclocal \ /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/pkgconfig /home/buildroot/autobuild/instance-1/output-1/target/usr/share/pkgconfig \ /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/cmake /home/buildroot/autobuild/instance-1/output-1/target/usr/share/cmake \ /home/buildroot/autobuild/instance-1/output-1/target/usr/doc find /home/buildroot/autobuild/instance-1/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/instance-1/output-1/target/lib/ /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/ /home/buildroot/autobuild/instance-1/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/share/gdb rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/share/bash-completion rm -rf /home/buildroot/autobuild/instance-1/output-1/target/etc/bash_completion.d rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/share/zsh rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/man /home/buildroot/autobuild/instance-1/output-1/target/usr/share/man rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/info /home/buildroot/autobuild/instance-1/output-1/target/usr/share/info rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/doc /home/buildroot/autobuild/instance-1/output-1/target/usr/share/doc rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/instance-1/output-1/target/usr/share 2>/dev/null || true rm -rf /home/buildroot/autobuild/instance-1/output-1/target/lib/debug /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/debug find /home/buildroot/autobuild/instance-1/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/instance-1/output-1/host/bin/nios2-linux-gnu-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/buildroot/autobuild/instance-1/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/instance-1/output-1/host/bin/nios2-linux-gnu-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/buildroot/autobuild/instance-1/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/instance-1/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/instance-1/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2021.05-1249-gac2db5eb2e"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2021.08-rc2"; \ echo "PRETTY_NAME=\"Buildroot 2021.08-rc2\"" \ ) > /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/instance-1/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/buildroot/autobuild/instance-1/output-1/per-package /home/buildroot/autobuild/instance-1/buildroot/support/scripts/fix-rpath target touch /home/buildroot/autobuild/instance-1/output-1/target/usr ln -snf /home/buildroot/autobuild/instance-1/output-1/host/nios2-buildroot-linux-gnu/sysroot /home/buildroot/autobuild/instance-1/output-1/staging make: Leaving directory '/home/buildroot/autobuild/instance-1/buildroot' make: Entering directory '/home/buildroot/autobuild/instance-1/buildroot' >>> Buildroot 2021.05-1249-gac2db5eb2e Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info sourceryg++-2018.05-5-nios2-linux-gnu.src.tar.bz2: OK (md5: be42ab83da2e8db7b73dc890c2549570) sourceryg++-2018.05-5-nios2-linux-gnu.src.tar.bz2: OK (sha256: d73a6364106dd62352711f932d3be8e97fdaaa548995678b5d38d9f21e22437a) >>> toolchain-external-codesourcery-niosII 2018.05-5 Collecting legal info >>> toolchain Collecting legal info >>> aircrack-ng 1.6 Collecting legal info LICENSE: OK (sha256: fc51fd3a97223f2fd47b057202d4a6b0daaedf23b5a1f5ff8723c192fc1e021d) >>> host-autoconf 2.69 Collecting legal info COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> libgcrypt 1.9.3 Collecting legal info COPYING.LIB: OK (sha256: ca0061fc1381a3ab242310e4b3f56389f28e3d460eb2fd822ed7a21c6f030532) >>> libgpg-error 1.42 Collecting legal info COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c) COPYING.LIB: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) >>> host-gettext Collecting legal info >>> host-gettext-gnu 0.20.1 Collecting legal info COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) gettext-runtime/intl/COPYING.LIB: OK (sha256: 3fe5361f24b7c49ba12911c08f5a33f9cb18871d95d9fb881f5b8a4793e04288) >>> host-libtextstyle 0.20.1 Collecting legal info COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> host-libxml2 2.9.12 Collecting legal info COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd) >>> openssl Collecting legal info >>> libopenssl 1.1.1l Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> pcre 8.44 Collecting legal info LICENCE: OK (sha256: 0dd9c13864dbb9ee4d77a1557e96be29b2d719fb6584192ee36611aae264c4a3) >>> sqlite 3.35.5 Collecting legal info tea/license.terms: OK (sha256: 66e056b6e8687f32af30d5187611b98b12a8f46f07aaf62f43585f276e8f0ac9) >>> android-tools 4.2.2+git20130218 Collecting legal info debian/copyright: OK (sha256: 170c5939bf8c8eed1db8f66f2d6155e8c1a3e799e390b55e7aad253195b1ebf5) >>> busybox 1.33.1 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f) >>> util-linux 2.36.2 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> cegui 00b4e1fe174da53b7ed726ab5970ba51bd5b5ee0 Collecting legal info COPYING: OK (sha256: cc869e2ece8ad039f6d7fd17259db4ea0ae0a502d02a1bb506c0168deb12e40d) >>> expat 2.4.1 Collecting legal info COPYING: OK (sha256: 8c6b5b6de8fae20b317f4992729abc0e520bfba4c7606cd1e9eeb87418eebdec) >>> glm 0.9.9.5 Collecting legal info manual.md: OK (sha256: 337130631a714eeae017556cad101d5324c2961214120b6214741d3d43667086) >>> host-cmake 3.16.9 Collecting legal info Copyright.txt: OK (sha256: dc628fb936a5d229296d42083f9a8218aa32204c016919e784404c9ec58776e9) >>> libxml2 2.9.12 Collecting legal info COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd) >>> dbus 1.12.20 Collecting legal info COPYING: OK (sha256: 0e46f54efb12d04ab5c33713bacd0e140c9a35b57ae29e03c853203266e8f3a1) >>> ecryptfs-utils 111 Collecting legal info COPYING: OK (sha256: 91df39d1816bfb17a4dda2d3d2c83b1f6f2d38d53e53e41e8f97ad5ac46a0cad) >>> host-intltool 0.51.0 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> host-libxml-parser-perl 2.46 Collecting legal info README: OK (sha256: 6a2e768443ed00f09d3d4bc4dd14451035eac13c6864d68d8e2f76edf5a044f2) >>> host-expat 2.4.1 Collecting legal info COPYING: OK (sha256: 8c6b5b6de8fae20b317f4992729abc0e520bfba4c7606cd1e9eeb87418eebdec) >>> keyutils 1.6.3 Collecting legal info LICENCE.GPL: OK (sha256: f46409d4822b2457b39bbd0e7881eecb396130eb8320b7748fa7e9488970aa6d) LICENCE.LGPL: OK (sha256: 0d15593e3a8ad90917f8509b5ac1e4b5e5d196434a68029aa9dc0858a4a4c521) >>> libnss 3.68 Collecting legal info nss/COPYING: OK (sha256: a20c1a32d1f8102432360b42e932869f7c11c7cdbacf9cac554c422132af47f4) >>> libnspr 4.32 Collecting legal info nspr/LICENSE: OK (sha256: fab3dd6bdab226f1c08630b1dd917e11fcb4ec5e1e020e2c16f83a0a13863e85) >>> getent Collecting legal info >>> gettext-gnu 0.20.1 Collecting legal info COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) gettext-runtime/intl/COPYING.LIB: OK (sha256: 3fe5361f24b7c49ba12911c08f5a33f9cb18871d95d9fb881f5b8a4793e04288) >>> gettext Collecting legal info >>> gssdp 1.3.0 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-meson 0.58.2 Collecting legal info COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) >>> host-ninja 1.10.2 Collecting legal info COPYING: OK (sha256: eb7e9ab9690124c5c9f42bdc81383d886a3dede26345b6ed15bbad7caf81f7ea) >>> host-python3 3.9.6 Collecting legal info LICENSE: OK (sha256: 599826df92bfdcd2702eac691072498bb096c55af04ee984cf90f70ed77b5a70) >>> host-autoconf-archive 2019.01.06 Collecting legal info COPYING: OK (sha256: e6037104443f9a7829b2aa7c5370d0789a7bda3ca65a0b904cdc0c2e285d9195) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libffi 3.4.2 Collecting legal info LICENSE: OK (sha256: a61d06e8f7be57928e71e800eb9273b05cb8868c484108afe41e4305bb320dde) >>> host-zlib Collecting legal info >>> host-libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> host-python3-setuptools 44.0.0 Collecting legal info LICENSE: OK (sha256: c32a3ac395af6321efd28be73d06a00f0db6ab887d1c21d4fec46128d2056d5a) >>> libglib2 2.68.2 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-libglib2 2.68.2 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-pcre 8.44 Collecting legal info LICENCE: OK (sha256: 0dd9c13864dbb9ee4d77a1557e96be29b2d719fb6584192ee36611aae264c4a3) >>> host-util-linux 2.36.2 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libffi 3.4.2 Collecting legal info LICENSE: OK (sha256: a61d06e8f7be57928e71e800eb9273b05cb8868c484108afe41e4305bb320dde) >>> libsoup 2.72.0 Collecting legal info COPYING: OK (sha256: b7993225104d90ddd8024fd838faf300bea5e83d91203eab98e29512acebd69c) >>> libpsl 0.21.1 Collecting legal info COPYING: OK (sha256: 7903413e7aa0bbcb77aa19150a3f1034edc0a760cff174f9a53efe4de6f056a4) src/LICENSE.chromium: OK (sha256: 1d7f52747a9169751cdf2641a8299c0098e9ecdf9429296ffd55bdb14c9ed5b3) >>> libidn2 2.3.2 Collecting legal info COPYING: OK (sha256: 73483f797a83373fca1b968c11785b98c4fc4803cdc7d3210811ca8b075d6d76) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.LESSERv3: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) COPYING.unicode: OK (sha256: 01d621eef165cf4d3d3dbb737aa0699178d94c6f18cf87e9dde6db3ca7790f46) >>> libunistring 0.9.10 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) >>> gupnp-av 0.13.0 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> gupnp 1.3.0 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> inadyn 2.8.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> libconfuse 3.3 Collecting legal info LICENSE: OK (sha256: dc3ff4b62f851dd2e94a151061ffeb7d28ddfc880a442068dc5283dbaa927306) >>> initscripts Collecting legal info >>> libbdplus 0.1.2 Collecting legal info COPYING: OK (sha256: 592987e8510228d546540b84a22444bde98e48d03078d3b2eefcd889bec5ce8c) >>> libudfread 1.1.2 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> modem-manager 1.16.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> procrank_linux 21c30ab4514a5b15ac6e813e21bee0d3d714cb08 Collecting legal info NOTICE: OK (sha256: 38751245389e1e23f73e6f5384b5cbe7fa972cc4410c5adc9c04b082a0b9561a) >>> proj 7.2.1 Collecting legal info COPYING: OK (sha256: 2dcac4af6990093ef48b896bfb81452d46a31b08d46cce34b27e83f93b2e37f6) >>> host-sqlite 3.35.5 Collecting legal info tea/license.terms: OK (sha256: 66e056b6e8687f32af30d5187611b98b12a8f46f07aaf62f43585f276e8f0ac9) >>> sg3_utils 1.45 Collecting legal info COPYING: OK (sha256: d516b8b337a77e3d4c65dffe708ca7fb25b1cb4ec77ec362cf11ed659b9250bc) BSD_LICENSE: OK (sha256: 8ddd1d82f2be2f5cbd5b5c3b5c2ee94a90d2ca7112958448da74dd78384fd96a) >>> wilc1000-firmware 14.1 Collecting legal info WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-codesourcery-niosII-2018.05-5: cannot save license (TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII_LICENSE_FILES not defined) WARNING: wilc1000-firmware-14.1: cannot save license (WILC1000_FIRMWARE_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/instance-1/output-1/legal-info make: Leaving directory '/home/buildroot/autobuild/instance-1/buildroot'