echo "# endif"; echo;  \
if [ ".-DFPM_PPC" != "." ]; then  \
	echo ".-DFPM_PPC" | sed -e 's|^\.-D|# define |'; echo;  \
fi;  \
sed -ne 's/^# *define  *\(HAVE_.*_ASM\).*/# define \1/p'  \
	config.h; echo;  \
sed -ne 's/^# *define  *OPT_\(SPEED\|ACCURACY\).*/# define OPT_\1/p'  \
	config.h; echo;  \
sed -ne 's/^# *define  *\(SIZEOF_.*\)/# define \1/p'  \
	config.h; echo;  \
for header in version.h fixed.h bit.h timer.h stream.h frame.h synth.h decoder.h; do  \
	echo;  \
	sed -n -f ./mad.h.sed ./$header;  \
done; echo;  \
echo "# ifdef __cplusplus";  \
echo '}';  \
echo "# endif") >mad.h
/usr/bin/make  all-recursive
/bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC   -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -fomit-frame-pointer -c -o version.lo version.c
/bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC   -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -fomit-frame-pointer -c -o fixed.lo fixed.c
/bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC   -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -fomit-frame-pointer -c -o bit.lo bit.c
/bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC   -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -fomit-frame-pointer -c -o timer.lo timer.c
/bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC   -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -fomit-frame-pointer -c -o stream.lo stream.c
/bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC   -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -fomit-frame-pointer -c -o frame.lo frame.c
/bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC   -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -fomit-frame-pointer -c -o synth.lo synth.c
/bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC   -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -fomit-frame-pointer -c -o decoder.lo decoder.c
/bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC   -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -fomit-frame-pointer -c -o layer12.lo layer12.c
/bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC   -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -fomit-frame-pointer -c -o layer3.lo layer3.c
/bin/sh ./libtool --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC   -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -fomit-frame-pointer -c -o huffman.lo huffman.c
mkdir .libs
mkdir .libs
mkdir .libs
mkdir .libs
mkdir: cannot create directory '.libs': File existsmkdir: 
mkdir: cannot create directory '.libs'cannot create directory '.libs': File exists: File exists

 /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c bit.c  -fPIC -DPIC -o .libs/bit.o
 /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c layer12.c  -fPIC -DPIC -o .libs/layer12.o
 /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c huffman.c  -fPIC -DPIC -o .libs/huffman.o
 /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c stream.c  -fPIC -DPIC -o .libs/stream.o
 /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c decoder.c  -fPIC -DPIC -o .libs/decoder.o
 /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c layer3.c  -fPIC -DPIC -o .libs/layer3.o
 /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c frame.c  -fPIC -DPIC -o .libs/frame.o
 /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c version.c  -fPIC -DPIC -o .libs/version.o
 /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c synth.c  -fPIC -DPIC -o .libs/synth.o
 /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c timer.c  -fPIC -DPIC -o .libs/timer.o
 /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_PPC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fomit-frame-pointer -c fixed.c  -fPIC -DPIC -o .libs/fixed.o
layer12.c: In function 'mad_layer_II':
layer12.c:465:7: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
       if (allocation[ch][sb])
       ^~
layer12.c:467:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
  if (mad_bit_nextbyte(&stream->ptr) > stream->next_frame)
  ^~
/bin/sh ./libtool --mode=link /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc  -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os -fomit-frame-pointer   -o libmad.la -rpath /usr/lib -version-info 2:1:2 version.lo fixed.lo bit.lo timer.lo stream.lo frame.lo synth.lo decoder.lo layer12.lo layer3.lo huffman.lo    
/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -shared  .libs/version.o .libs/fixed.o .libs/bit.o .libs/timer.o .libs/stream.o .libs/frame.o .libs/synth.o .libs/decoder.o .libs/layer12.o .libs/layer3.o .libs/huffman.o   -Wl,-soname -Wl,libmad.so.0 -o .libs/libmad.so.0.2.1
(cd .libs && rm -f libmad.so.0 && ln -s libmad.so.0.2.1 libmad.so.0)
(cd .libs && rm -f libmad.so && ln -s libmad.so.0.2.1 libmad.so)
creating libmad.la
(cd .libs && rm -f libmad.la && ln -s ../libmad.la libmad.la)
>>> libmad 0.15.1b Installing to staging directory
PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin"  /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot install -C /home/peko/autobuild/instance-3/output/build/libmad-0.15.1b/
/usr/bin/make  install-recursive
mkdir -p -- . /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib
mkdir -p -- . /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include
 /bin/sh ./libtool --mode=install /usr/bin/install -c  libmad.la /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libmad.la
 /usr/bin/install -c -m 644 mad.h /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/mad.h
/usr/bin/install -c .libs/libmad.so.0.2.1 /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libmad.so.0.2.1
(cd /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib && rm -f libmad.so.0 && ln -s libmad.so.0.2.1 libmad.so.0)
(cd /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib && rm -f libmad.so && ln -s libmad.so.0.2.1 libmad.so)
/usr/bin/install -c .libs/libmad.lai /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libmad.la
libtool: install: warning: remember to run `libtool --finish /usr/lib'
/usr/bin/install -D package/libmad/mad.pc /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig/mad.pc
>>> libmad 0.15.1b Fixing libtool files
>>> libmad 0.15.1b Installing to target
PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin"  /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-3/output/target install -C /home/peko/autobuild/instance-3/output/build/libmad-0.15.1b/
/usr/bin/make  install-recursive
mkdir -p -- . /home/peko/autobuild/instance-3/output/target/usr/lib
mkdir -p -- . /home/peko/autobuild/instance-3/output/target/usr/include
 /bin/sh ./libtool --mode=install /usr/bin/install -c  libmad.la /home/peko/autobuild/instance-3/output/target/usr/lib/libmad.la
 /usr/bin/install -c -m 644 mad.h /home/peko/autobuild/instance-3/output/target/usr/include/mad.h
/usr/bin/install -c .libs/libmad.so.0.2.1 /home/peko/autobuild/instance-3/output/target/usr/lib/libmad.so.0.2.1
(cd /home/peko/autobuild/instance-3/output/target/usr/lib && rm -f libmad.so.0 && ln -s libmad.so.0.2.1 libmad.so.0)
(cd /home/peko/autobuild/instance-3/output/target/usr/lib && rm -f libmad.so && ln -s libmad.so.0.2.1 libmad.so)
/usr/bin/install -c .libs/libmad.lai /home/peko/autobuild/instance-3/output/target/usr/lib/libmad.la
libtool: install: warning: remember to run `libtool --finish /usr/lib'
libmms-0.6.2.tar.gz: OK (sha256: 01931b62172d7d7050fc9ef9b1b64162f3b6e9f6cc4415170192a32a0b7ea432)
>>> libmms 0.6.2 Extracting
gzip -d -c /home/peko/autobuild/instance-3/dl/libmms-0.6.2.tar.gz | tar --strip-components=1 -C /home/peko/autobuild/instance-3/output/build/libmms-0.6.2   -xf -
>>> libmms 0.6.2 Patching
>>> libmms 0.6.2 Updating config.sub and config.guess
for file in config.guess config.sub; do for i in $(find /home/peko/autobuild/instance-3/output/build/libmms-0.6.2 -name $file); do cp support/gnuconfig/$file $i; done; done
>>> libmms 0.6.2 Patching libtool
patching file /home/peko/autobuild/instance-3/output/build/libmms-0.6.2/ltmain.sh
>>> libmms 0.6.2 Configuring
(cd /home/peko/autobuild/instance-3/output/build/libmms-0.6.2/ && rm -rf config.cache && PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" AR="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ar" AS="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-as" LD="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld" NM="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-nm" CC="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc" GCC="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc" CPP="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-cpp" CXX="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-g++" FC="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gfortran" F77="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gfortran" RANLIB="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ranlib" READELF="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-readelf" STRIP="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-strip" OBJCOPY="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-objcopy" OBJDUMP="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/peko/autobuild/instance-3/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-3/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-3/output/host/include" LDFLAGS_FOR_BUILD="-L/home/peko/autobuild/instance-3/output/host/lib -Wl,-rpath,/home/peko/autobuild/instance-3/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-as" DEFAULT_LINKER="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/peko/autobuild/instance-3/output/host/bin/pkg-config" STAGING_DIR="/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=no ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes   CONFIG_SITE=/dev/null ./configure --target=powerpc-buildroot-linux-uclibc --host=powerpc-buildroot-linux-uclibc --build=powerpc64le-unknown-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared   )
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for powerpc-buildroot-linux-uclibc-strip... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for powerpc-buildroot-linux-uclibc-gcc... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc accepts -g... yes
checking for /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc option to accept ISO C89... none needed
checking dependency style of /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc... none
checking for library containing strerror... none required
checking build system type... powerpc64le-unknown-linux-gnu
checking host system type... powerpc-buildroot-linux-uclibc
checking for powerpc-buildroot-linux-uclibc-gcc... (cached) /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc accepts -g... (cached) yes
checking for /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc option to accept ISO C89... (cached) none needed
checking dependency style of /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc... (cached) none
checking how to run the C preprocessor... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-cpp
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld
checking if the linker (/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-nm
checking the name lister (/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld option to reload object files... -r
checking for powerpc-buildroot-linux-uclibc-objdump... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-objdump
checking how to recognize dependent libraries... pass_all
checking for powerpc-buildroot-linux-uclibc-ar... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ar
checking for powerpc-buildroot-linux-uclibc-strip... (cached) /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-strip
checking for powerpc-buildroot-linux-uclibc-ranlib... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ranlib
checking command to parse /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-nm output from /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc object... ok
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc supports -fno-rtti -fno-exceptions... no
checking for /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc option to produce PIC... -fPIC -DPIC
checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc PIC flag -fPIC -DPIC works... yes
checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc static flag -static works... yes
checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc supports -c -o file.o... yes
checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc supports -c -o file.o... (cached) yes
checking whether the /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc linker (/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking windows.h usability... no
checking windows.h presence... no
checking for windows.h... no
checking winsock2.h usability... no
checking winsock2.h presence... no
checking for winsock2.h... no
checking pkg-config is at least version 0.9.0... yes
checking for GLIB... yes
checking for large file support... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating pkgconfig/Makefile
config.status: creating pkgconfig/libmms.pc
config.status: creating src/Makefile
config.status: creating libmms.spec
config.status: creating config.h
config.status: creating src/mms_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
configure done
>>> libmms 0.6.2 Building
PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin"  /usr/bin/make -j16  -C /home/peko/autobuild/instance-3/output/build/libmms-0.6.2/
/usr/bin/make  all-recursive
Making all in src
/usr/bin/make  all-am
/bin/sh ../libtool --tag=CC   --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I..   -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include    -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  -c -o mms.lo mms.c
/bin/sh ../libtool --tag=CC   --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I..   -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include    -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  -c -o mmsh.lo mmsh.c
/bin/sh ../libtool --tag=CC   --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I..   -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include    -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  -c -o mmsx.lo mmsx.c
/bin/sh ../libtool --tag=CC   --mode=compile /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I..   -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include    -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  -c -o uri.lo uri.c
libtool: compile:  /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c mms.c  -fPIC -DPIC -o .libs/mms.o
libtool: compile:  /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c mmsh.c  -fPIC -DPIC -o .libs/mmsh.o
libtool: compile:  /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c mmsx.c  -fPIC -DPIC -o .libs/mmsx.o
libtool: compile:  /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0 -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/glib-2.0/include -I/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c uri.c  -fPIC -DPIC -o .libs/uri.o
/bin/sh ../libtool --tag=CC   --mode=link /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  -version-info 0:2:0 -no-undefined -export-dynamic  -o libmms.la -rpath /usr/lib mms.lo mmsh.lo mmsx.lo uri.lo -L/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib -lglib-2.0   
libtool: link: warning: `/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libpcre.la' seems to be moved
libtool: link: /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc -shared  .libs/mms.o .libs/mmsh.o .libs/mmsx.o .libs/uri.o   -Wl,-rpath -Wl,/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib -Wl,-rpath -Wl,/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib -L/home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib /home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libglib-2.0.so /home/peko/autobuild/instance-3/output/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libpcre.so -lpthread    -Wl,-soname -Wl,libmms.so.0 -o .libs/libmms.so.0.0.2
libtool: link: (cd ".libs" && rm -f "libmms.so.0" && ln -s "libmms.so.0.0.2" "libmms.so.0")
libtool: link: (cd ".libs" && rm -f "libmms.so" && ln -s "libmms.so.0.0.2" "libmms.so")
libtool: link: ( cd ".libs" && rm -f "libmms.la" && ln -s "../libmms.la" "libmms.la" )
Making all in pkgconfig
make[4]: Nothing to be done for `all'.
make[4]: Nothing to be done for `all-am'.
>>> libmms 0.6.2 Installing to staging directory
PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin"  /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot install -C /home/peko/autobuild/instance-3/output/build/libmms-0.6.2/
Making install in src
test -z "/usr/lib" || /usr/bin/mkdir -p "/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib"
test -z "/usr/include/libmms" || /usr/bin/mkdir -p "/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/libmms"
test -z "/usr/include/libmms" || /usr/bin/mkdir -p "/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/libmms"
 /bin/sh ../libtool   --mode=install /usr/bin/install -c   libmms.la '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib'
 /usr/bin/install -c -m 644 mms_config.h '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/libmms'
 /usr/bin/install -c -m 644 mms.h mmsio.h mmsx.h mmsh.h '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/libmms'
libtool: install: /usr/bin/install -c .libs/libmms.so.0.0.2 /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libmms.so.0.0.2
libtool: install: (cd /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libmms.so.0.0.2 libmms.so.0 || { rm -f libmms.so.0 && ln -s libmms.so.0.0.2 libmms.so.0; }; })
libtool: install: (cd /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libmms.so.0.0.2 libmms.so || { rm -f libmms.so && ln -s libmms.so.0.0.2 libmms.so; }; })
libtool: install: /usr/bin/install -c .libs/libmms.lai /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libmms.la
libtool: install: warning: remember to run `libtool --finish /usr/lib'
Making install in pkgconfig
make[4]: Nothing to be done for `install-exec-am'.
test -z "/usr/lib/pkgconfig" || /usr/bin/mkdir -p "/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig"
 /usr/bin/install -c -m 644 libmms.pc '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig'
make[4]: Nothing to be done for `install-exec-am'.
make[4]: Nothing to be done for `install-data-am'.
>>> libmms 0.6.2 Fixing libtool files
>>> libmms 0.6.2 Installing to target
PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin"  /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-3/output/target install -C /home/peko/autobuild/instance-3/output/build/libmms-0.6.2/
Making install in src
test -z "/usr/lib" || /usr/bin/mkdir -p "/home/peko/autobuild/instance-3/output/target/usr/lib"
test -z "/usr/include/libmms" || /usr/bin/mkdir -p "/home/peko/autobuild/instance-3/output/target/usr/include/libmms"
test -z "/usr/include/libmms" || /usr/bin/mkdir -p "/home/peko/autobuild/instance-3/output/target/usr/include/libmms"
 /bin/sh ../libtool   --mode=install /usr/bin/install -c   libmms.la '/home/peko/autobuild/instance-3/output/target/usr/lib'
 /usr/bin/install -c -m 644 mms_config.h '/home/peko/autobuild/instance-3/output/target/usr/include/libmms'
 /usr/bin/install -c -m 644 mms.h mmsio.h mmsx.h mmsh.h '/home/peko/autobuild/instance-3/output/target/usr/include/libmms'
libtool: install: /usr/bin/install -c .libs/libmms.so.0.0.2 /home/peko/autobuild/instance-3/output/target/usr/lib/libmms.so.0.0.2
libtool: install: (cd /home/peko/autobuild/instance-3/output/target/usr/lib && { ln -s -f libmms.so.0.0.2 libmms.so.0 || { rm -f libmms.so.0 && ln -s libmms.so.0.0.2 libmms.so.0; }; })
libtool: install: (cd /home/peko/autobuild/instance-3/output/target/usr/lib && { ln -s -f libmms.so.0.0.2 libmms.so || { rm -f libmms.so && ln -s libmms.so.0.0.2 libmms.so; }; })
libtool: install: /usr/bin/install -c .libs/libmms.lai /home/peko/autobuild/instance-3/output/target/usr/lib/libmms.la
libtool: install: warning: remember to run `libtool --finish /usr/lib'
Making install in pkgconfig
make[4]: Nothing to be done for `install-exec-am'.
test -z "/usr/lib/pkgconfig" || /usr/bin/mkdir -p "/home/peko/autobuild/instance-3/output/target/usr/lib/pkgconfig"
 /usr/bin/install -c -m 644 libmms.pc '/home/peko/autobuild/instance-3/output/target/usr/lib/pkgconfig'
make[4]: Nothing to be done for `install-exec-am'.
make[4]: Nothing to be done for `install-data-am'.
libmnl-1.0.4.tar.bz2: OK (md5: be9b4b5328c6da1bda565ac5dffadb2d)
libmnl-1.0.4.tar.bz2: OK (sha1: 2db40dea612e88c62fd321906be40ab5f8f1685a)
>>> libmnl 1.0.4 Extracting
bzcat /home/peko/autobuild/instance-3/dl/libmnl-1.0.4.tar.bz2 | tar --strip-components=1 -C /home/peko/autobuild/instance-3/output/build/libmnl-1.0.4   -xf -
>>> libmnl 1.0.4 Patching
>>> libmnl 1.0.4 Updating config.sub and config.guess
for file in config.guess config.sub; do for i in $(find /home/peko/autobuild/instance-3/output/build/libmnl-1.0.4 -name $file); do cp support/gnuconfig/$file $i; done; done
>>> libmnl 1.0.4 Patching libtool
patching file /home/peko/autobuild/instance-3/output/build/libmnl-1.0.4/build-aux/ltmain.sh
Hunk #7 succeeded at 6699 (offset 3 lines).
Hunk #8 succeeded at 9280 (offset 6 lines).
>>> libmnl 1.0.4 Configuring
(cd /home/peko/autobuild/instance-3/output/build/libmnl-1.0.4/ && rm -rf config.cache && PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" AR="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ar" AS="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-as" LD="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld" NM="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-nm" CC="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc" GCC="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc" CPP="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-cpp" CXX="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-g++" FC="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gfortran" F77="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gfortran" RANLIB="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ranlib" READELF="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-readelf" STRIP="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-strip" OBJCOPY="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-objcopy" OBJDUMP="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/peko/autobuild/instance-3/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-3/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-3/output/host/include" LDFLAGS_FOR_BUILD="-L/home/peko/autobuild/instance-3/output/host/lib -Wl,-rpath,/home/peko/autobuild/instance-3/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-as" DEFAULT_LINKER="/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/peko/autobuild/instance-3/output/host/bin/pkg-config" STAGING_DIR="/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=no ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes   CONFIG_SITE=/dev/null ./configure --target=powerpc-buildroot-linux-uclibc --host=powerpc-buildroot-linux-uclibc --build=powerpc64le-unknown-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared   )
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
checking build system type... powerpc64le-unknown-linux-gnu
checking host system type... powerpc-buildroot-linux-uclibc
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for powerpc-buildroot-linux-uclibc-strip... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking how to create a pax tar archive... gnutar
checking whether make supports nested variables... (cached) yes
checking for powerpc-buildroot-linux-uclibc-gcc... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc accepts -g... yes
checking for /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc option to accept ISO C89... none needed
checking whether /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc... none
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld
checking if the linker (/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-nm
checking the name lister (/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert powerpc64le-unknown-linux-gnu file names to powerpc-buildroot-linux-uclibc format... func_convert_file_noop
checking how to convert powerpc64le-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld option to reload object files... -r
checking for powerpc-buildroot-linux-uclibc-objdump... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-objdump
checking how to recognize dependent libraries... pass_all
checking for powerpc-buildroot-linux-uclibc-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for powerpc-buildroot-linux-uclibc-ar... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ar
checking for archiver @FILE support... @
checking for powerpc-buildroot-linux-uclibc-strip... (cached) /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-strip
checking for powerpc-buildroot-linux-uclibc-ranlib... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ranlib
checking command to parse /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-nm output from /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc object... ok
checking for sysroot... no
checking for powerpc-buildroot-linux-uclibc-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-cpp
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc supports -fno-rtti -fno-exceptions... no
checking for /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc option to produce PIC... -fPIC -DPIC
checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc PIC flag -fPIC -DPIC works... yes
checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc static flag -static works... yes
checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc supports -c -o file.o... yes
checking if /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc supports -c -o file.o... (cached) yes
checking whether the /home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-gcc linker (/home/peko/autobuild/instance-3/output/host/bin/powerpc-buildroot-linux-uclibc-ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking whether compiler accepts -fvisibility=hidden... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating include/Makefile
config.status: creating include/libmnl/Makefile
config.status: creating include/linux/Makefile
config.status: creating include/linux/netfilter/Makefile
config.status: creating examples/Makefile
config.status: creating examples/genl/Makefile
config.status: creating examples/kobject/Makefile
config.status: creating examples/netfilter/Makefile
config.status: creating examples/rtnl/Makefile
config.status: creating libmnl.pc
config.status: creating doxygen.cfg
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
>>> libmnl 1.0.4 Building
PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin"  /usr/bin/make -j16  -C /home/peko/autobuild/instance-3/output/build/libmnl-1.0.4/
/usr/bin/make  all-recursive
Making all in src
  CC       socket.lo
  CC       callback.lo
  CC       nlmsg.lo
  CC       attr.lo
  CCLD     libmnl.la
Making all in include
Making all in libmnl
make[5]: Nothing to be done for `all'.
Making all in linux
Making all in netfilter
make[6]: Nothing to be done for `all'.
make[6]: Nothing to be done for `all-am'.
make[5]: Nothing to be done for `all-am'.
Making all in examples
Making all in genl
make[5]: Nothing to be done for `all'.
Making all in kobject
make[5]: Nothing to be done for `all'.
Making all in netfilter
make[5]: Nothing to be done for `all'.
Making all in rtnl
make[5]: Nothing to be done for `all'.
make[5]: Nothing to be done for `all-am'.
>>> libmnl 1.0.4 Installing to staging directory
PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin"  /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot install -C /home/peko/autobuild/instance-3/output/build/libmnl-1.0.4/
Making install in src
make[4]: Nothing to be done for `install-data-am'.
 /usr/bin/mkdir -p '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib'
 /bin/sh ../libtool   --mode=install /usr/bin/install -c   libmnl.la '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib'
libtool: install: /usr/bin/install -c .libs/libmnl.so.0.2.0 /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libmnl.so.0.2.0
libtool: install: (cd /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libmnl.so.0.2.0 libmnl.so.0 || { rm -f libmnl.so.0 && ln -s libmnl.so.0.2.0 libmnl.so.0; }; })
libtool: install: (cd /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libmnl.so.0.2.0 libmnl.so || { rm -f libmnl.so && ln -s libmnl.so.0.2.0 libmnl.so; }; })
libtool: install: /usr/bin/install -c .libs/libmnl.lai /home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libmnl.la
libtool: install: warning: remember to run `libtool --finish /usr/lib'
Making install in include
Making install in libmnl
make[5]: Nothing to be done for `install-exec-am'.
 /usr/bin/mkdir -p '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/libmnl'
 /usr/bin/install -c -m 644 libmnl.h '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/libmnl'
Making install in linux
Making install in netfilter
make[6]: Nothing to be done for `install-exec-am'.
make[6]: Nothing to be done for `install-data-am'.
make[6]: Nothing to be done for `install-exec-am'.
make[6]: Nothing to be done for `install-data-am'.
make[5]: Nothing to be done for `install-exec-am'.
make[5]: Nothing to be done for `install-data-am'.
Making install in examples
Making install in genl
make[5]: Nothing to be done for `install-exec-am'.
make[5]: Nothing to be done for `install-data-am'.
Making install in kobject
make[5]: Nothing to be done for `install-exec-am'.
make[5]: Nothing to be done for `install-data-am'.
Making install in netfilter
make[5]: Nothing to be done for `install-exec-am'.
make[5]: Nothing to be done for `install-data-am'.
Making install in rtnl
make[5]: Nothing to be done for `install-exec-am'.
make[5]: Nothing to be done for `install-data-am'.
make[5]: Nothing to be done for `install-exec-am'.
make[5]: Nothing to be done for `install-data-am'.
make[4]: Nothing to be done for `install-exec-am'.
 /usr/bin/mkdir -p '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig'
 /usr/bin/install -c -m 644 libmnl.pc '/home/peko/autobuild/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig'
>>> libmnl 1.0.4 Fixing libtool files
>>> libmnl 1.0.4 Installing to target
PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin"  /usr/bin/make -j16 DESTDIR=/home/peko/autobuild/instance-3/output/target install -C /home/peko/autobuild/instance-3/output/build/libmnl-1.0.4/
Making install in src
make[4]: Nothing to be done for `install-data-am'.
 /usr/bin/mkdir -p '/home/peko/autobuild/instance-3/output/target/usr/lib'
 /bin/sh ../libtool   --mode=install /usr/bin/install -c   libmnl.la '/home/peko/autobuild/instance-3/output/target/usr/lib'
libtool: install: /usr/bin/install -c .libs/libmnl.so.0.2.0 /home/peko/autobuild/instance-3/output/target/usr/lib/libmnl.so.0.2.0
libtool: install: (cd /home/peko/autobuild/instance-3/output/target/usr/lib && { ln -s -f libmnl.so.0.2.0 libmnl.so.0 || { rm -f libmnl.so.0 && ln -s libmnl.so.0.2.0 libmnl.so.0; }; })
libtool: install: (cd /home/peko/autobuild/instance-3/output/target/usr/lib && { ln -s -f libmnl.so.0.2.0 libmnl.so || { rm -f libmnl.so && ln -s libmnl.so.0.2.0 libmnl.so; }; })
libtool: install: /usr/bin/install -c .libs/libmnl.lai /home/peko/autobuild/instance-3/output/target/usr/lib/libmnl.la
libtool: install: warning: remember to run `libtool --finish /usr/lib'
Making install in include
Making install in libmnl
make[5]: Nothing to be done for `install-exec-am'.
 /usr/bin/mkdir -p '/home/peko/autobuild/instance-3/output/target/usr/include/libmnl'
 /usr/bin/install -c -m 644 libmnl.h '/home/peko/autobuild/instance-3/output/target/usr/include/libmnl'
Making install in linux
Making install in netfilter
make[6]: Nothing to be done for `install-exec-am'.
make[6]: Nothing to be done for `install-data-am'.
make[6]: Nothing to be done for `install-exec-am'.
make[6]: Nothing to be done for `install-data-am'.
make[5]: Nothing to be done for `install-exec-am'.
make[5]: Nothing to be done for `install-data-am'.
Making install in examples
Making install in genl
make[5]: Nothing to be done for `install-exec-am'.
make[5]: Nothing to be done for `install-data-am'.
Making install in kobject
make[5]: Nothing to be done for `install-exec-am'.
make[5]: Nothing to be done for `install-data-am'.
Making install in netfilter
make[5]: Nothing to be done for `install-exec-am'.
make[5]: Nothing to be done for `install-data-am'.
Making install in rtnl
make[5]: Nothing to be done for `install-exec-am'.
make[5]: Nothing to be done for `install-data-am'.
make[5]: Nothing to be done for `install-exec-am'.
make[5]: Nothing to be done for `install-data-am'.
make[4]: Nothing to be done for `install-exec-am'.
 /usr/bin/mkdir -p '/home/peko/autobuild/instance-3/output/target/usr/lib/pkgconfig'
 /usr/bin/install -c -m 644 libmnl.pc '/home/peko/autobuild/instance-3/output/target/usr/lib/pkgconfig'
libmpdclient-2.14.tar.xz: OK (sha256: 0a84e2791bfe3077cf22ee1784c805d5bb550803dffe56a39aa3690a38061372)
>>> libmpdclient 2.14 Extracting
xzcat /home/peko/autobuild/instance-3/dl/libmpdclient-2.14.tar.xz | tar --strip-components=1 -C /home/peko/autobuild/instance-3/output/build/libmpdclient-2.14   -xf -
>>> libmpdclient 2.14 Patching
>>> libmpdclient 2.14 Configuring
rm -rf /home/peko/autobuild/instance-3/output/build/libmpdclient-2.14/build
mkdir -p /home/peko/autobuild/instance-3/output/build/libmpdclient-2.14/build
PATH="/home/peko/autobuild/instance-3/output/host/bin:/home/peko/autobuild/instance-3/output/host/sbin:/home/peko/host/usr/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/peko/.local/bin:/home/peko/bin" meson --prefix=/usr --buildtype release --cross-file /home/peko/autobuild/instance-3/output/host/etc/meson/cross-compilation.conf /home/peko/autobuild/instance-3/output/build/libmpdclient-2.14 /home/peko/autobuild/instance-3/output/build/libmpdclient-2.14/build
/bin/sh: meson: command not found
make[1]: *** [/home/peko/autobuild/instance-3/output/build/libmpdclient-2.14/.stamp_configured] Error 127
make: *** [_all] Error 2
make: Leaving directory `/home/peko/autobuild/instance-3/buildroot'