libtool: install: /usr/bin/install -c sg_test_rwbuf /home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/bin/sg_test_rwbuf
libtool: install: /usr/bin/install -c sg_xcopy /home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/bin/sg_xcopy
libtool: install: /usr/bin/install -c sginfo /home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/bin/sginfo
libtool: install: /usr/bin/install -c sgm_dd /home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/bin/sgm_dd
libtool: install: /usr/bin/install -c sgp_dd /home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/bin/sgp_dd
make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/src'
make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/src'
Making install in doc
make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/doc'
make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/doc'
make[3]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/share/man/man8'
 /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 '/home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/share/man/man8'
 /usr/bin/install -c -m 644 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/share/man/man8'
make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/doc'
make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/doc'
Making install in scripts
make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/scripts'
make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/scripts'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/bin'
 /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/bin'
make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/scripts'
make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/scripts'
make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44'
make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44'
make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44'
make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44'
>>> sg3_utils 1.44 Fixing libtool files
>>> sg3_utils 1.44 Installing to target
PATH="/home/buildroot/autobuild/run/instance-3/output/host/bin:/home/buildroot/autobuild/run/instance-3/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/snap/bin"  /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/run/instance-3/output/target install -C /home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/
make[1]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44'
Making install in include
make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/include'
make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/include'
make[3]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/target/usr/include/scsi'
 /usr/bin/install -c -m 644 sg_lib.h sg_lib_data.h sg_cmds.h sg_cmds_basic.h sg_cmds_extra.h sg_cmds_mmc.h sg_pr2serr.h sg_unaligned.h sg_pt.h sg_pt_nvme.h sg_linux_inc.h sg_io_linux.h sg_pt_linux.h '/home/buildroot/autobuild/run/instance-3/output/target/usr/include/scsi'
make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/include'
make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/include'
Making install in lib
make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/lib'
make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/lib'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/target/usr/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libsgutils2.la '/home/buildroot/autobuild/run/instance-3/output/target/usr/lib'
libtool: install: /usr/bin/install -c .libs/libsgutils2.lai /home/buildroot/autobuild/run/instance-3/output/target/usr/lib/libsgutils2.la
libtool: install: /usr/bin/install -c .libs/libsgutils2.a /home/buildroot/autobuild/run/instance-3/output/target/usr/lib/libsgutils2.a
libtool: install: chmod 644 /home/buildroot/autobuild/run/instance-3/output/target/usr/lib/libsgutils2.a
libtool: install: /home/buildroot/autobuild/run/instance-3/output/host/bin/arm-linux-ranlib /home/buildroot/autobuild/run/instance-3/output/target/usr/lib/libsgutils2.a
libtool: warning: remember to run 'libtool --finish /usr/lib'
make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/lib'
make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/lib'
Making install in src
make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/src'
make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/src'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/target/usr/bin'
  /bin/bash ../libtool   --mode=install /usr/bin/install -c sg_bg_ctl sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_seek sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_stream_ctl sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_write_x sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/home/buildroot/autobuild/run/instance-3/output/target/usr/bin'
libtool: install: /usr/bin/install -c sg_bg_ctl /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_bg_ctl
libtool: install: /usr/bin/install -c sg_compare_and_write /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_compare_and_write
libtool: install: /usr/bin/install -c sg_decode_sense /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_decode_sense
libtool: install: /usr/bin/install -c sg_format /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_format
libtool: install: /usr/bin/install -c sg_get_config /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_get_config
libtool: install: /usr/bin/install -c sg_get_lba_status /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_get_lba_status
libtool: install: /usr/bin/install -c sg_ident /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_ident
libtool: install: /usr/bin/install -c sg_inq /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_inq
libtool: install: /usr/bin/install -c sg_logs /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_logs
libtool: install: /usr/bin/install -c sg_luns /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_luns
libtool: install: /usr/bin/install -c sg_modes /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_modes
libtool: install: /usr/bin/install -c sg_opcodes /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_opcodes
libtool: install: /usr/bin/install -c sg_persist /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_persist
libtool: install: /usr/bin/install -c sg_prevent /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_prevent
libtool: install: /usr/bin/install -c sg_raw /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_raw
libtool: install: /usr/bin/install -c sg_rdac /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_rdac
libtool: install: /usr/bin/install -c sg_read_attr /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_read_attr
libtool: install: /usr/bin/install -c sg_read_block_limits /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_read_block_limits
libtool: install: /usr/bin/install -c sg_read_buffer /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_read_buffer
libtool: install: /usr/bin/install -c sg_read_long /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_read_long
libtool: install: /usr/bin/install -c sg_readcap /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_readcap
libtool: install: /usr/bin/install -c sg_reassign /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_reassign
libtool: install: /usr/bin/install -c sg_referrals /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_referrals
libtool: install: /usr/bin/install -c sg_rep_zones /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_rep_zones
libtool: install: /usr/bin/install -c sg_requests /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_requests
libtool: install: /usr/bin/install -c sg_reset_wp /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_reset_wp
libtool: install: /usr/bin/install -c sg_rmsn /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_rmsn
libtool: install: /usr/bin/install -c sg_rtpg /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_rtpg
libtool: install: /usr/bin/install -c sg_safte /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_safte
libtool: install: /usr/bin/install -c sg_sanitize /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_sanitize
libtool: install: /usr/bin/install -c sg_sat_identify /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_sat_identify
libtool: install: /usr/bin/install -c sg_sat_phy_event /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_sat_phy_event
libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_sat_read_gplog
libtool: install: /usr/bin/install -c sg_sat_set_features /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_sat_set_features
libtool: install: /usr/bin/install -c sg_seek /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_seek
libtool: install: /usr/bin/install -c sg_senddiag /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_senddiag
libtool: install: /usr/bin/install -c sg_ses /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_ses
libtool: install: /usr/bin/install -c sg_ses_microcode /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_ses_microcode
libtool: install: /usr/bin/install -c sg_start /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_start
libtool: install: /usr/bin/install -c sg_stpg /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_stpg
libtool: install: /usr/bin/install -c sg_stream_ctl /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_stream_ctl
libtool: install: /usr/bin/install -c sg_sync /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_sync
libtool: install: /usr/bin/install -c sg_timestamp /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_timestamp
libtool: install: /usr/bin/install -c sg_turs /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_turs
libtool: install: /usr/bin/install -c sg_unmap /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_unmap
libtool: install: /usr/bin/install -c sg_verify /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_verify
libtool: install: /usr/bin/install -c sg_vpd /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_vpd
libtool: install: /usr/bin/install -c sg_wr_mode /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_wr_mode
libtool: install: /usr/bin/install -c sg_write_buffer /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_write_buffer
libtool: install: /usr/bin/install -c sg_write_long /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_write_long
libtool: install: /usr/bin/install -c sg_write_same /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_write_same
libtool: install: /usr/bin/install -c sg_write_verify /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_write_verify
libtool: install: /usr/bin/install -c sg_write_x /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_write_x
libtool: install: /usr/bin/install -c sg_zone /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_zone
libtool: install: /usr/bin/install -c sg_copy_results /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_copy_results
libtool: install: /usr/bin/install -c sg_dd /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_dd
libtool: install: /usr/bin/install -c sg_emc_trespass /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_emc_trespass
libtool: install: /usr/bin/install -c sg_map /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_map
libtool: install: /usr/bin/install -c sg_map26 /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_map26
libtool: install: /usr/bin/install -c sg_rbuf /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_rbuf
libtool: install: /usr/bin/install -c sg_read /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_read
libtool: install: /usr/bin/install -c sg_reset /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_reset
libtool: install: /usr/bin/install -c sg_scan /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_scan
libtool: install: /usr/bin/install -c sg_test_rwbuf /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_test_rwbuf
libtool: install: /usr/bin/install -c sg_xcopy /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_xcopy
libtool: install: /usr/bin/install -c sginfo /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sginfo
libtool: install: /usr/bin/install -c sgm_dd /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sgm_dd
libtool: install: /usr/bin/install -c sgp_dd /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sgp_dd
make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/src'
make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/src'
Making install in doc
make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/doc'
make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/doc'
make[3]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/target/usr/share/man/man8'
 /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 sg_sat_phy_event.8 '/home/buildroot/autobuild/run/instance-3/output/target/usr/share/man/man8'
 /usr/bin/install -c -m 644 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/buildroot/autobuild/run/instance-3/output/target/usr/share/man/man8'
make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/doc'
make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/doc'
Making install in scripts
make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/scripts'
make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/scripts'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output/target/usr/bin'
 /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/buildroot/autobuild/run/instance-3/output/target/usr/bin'
make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/scripts'
make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44/scripts'
make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44'
make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44'
make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44'
make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/sg3_utils-1.44'
for prog in compare_and_write copy_results dd decode_sense emc_trespass format get_config get_lba_status ident inq logs luns map26 map sgm_dd modes opcodes sgp_dd persist prevent raw rbuf rdac read readcap read_block_limits read_attr read_buffer read_long reassign referrals rep_zones requests reset reset_wp rmsn rtpg safte sanitize sat_identify sat_phy_event sat_read_gplog sat_set_features scan senddiag ses ses_microcode start stpg sync test_rwbuf timestamp turs unmap verify vpd write_buffer write_long write_same write_verify wr_mode xcopy zone; do rm -f /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/sg_${prog} ; done
for prog in logging_level mandat readcap ready satl start stop temperature; do rm -f /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/scsi_${prog} ; done
for prog in sginfo sgm_dd sgp_dd; do rm -f /home/buildroot/autobuild/run/instance-3/output/target/usr/bin/${prog}; done
>>> snappy 1.1.7 Downloading
--2019-03-12 07:37:39--  https://github.com/google/snappy/archive/1.1.7/snappy-1.1.7.tar.gz
Resolving github.com (github.com)... 192.30.253.113, 192.30.253.112
Connecting to github.com (github.com)|192.30.253.113|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/google/snappy/tar.gz/1.1.7 [following]
--2019-03-12 07:37:39--  https://codeload.github.com/google/snappy/tar.gz/1.1.7
Resolving codeload.github.com (codeload.github.com)... 192.30.253.121, 192.30.253.120
Connecting to codeload.github.com (codeload.github.com)|192.30.253.121|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [application/x-gzip]
Saving to: '/home/buildroot/autobuild/run/instance-3/output/build/.snappy-1.1.7.tar.gz.IblBCW/output'

     0K .......... .......... .......... .......... ..........  305K
    50K .......... .......... .......... .......... ..........  658K
   100K .......... .......... .......... .......... ..........  113M
   150K .......... .......... .......... .......... ..........  126M
   200K .......... .......... .......... .......... ..........  661K
   250K .......... .......... .......... .......... ..........  116M
   300K .......... .......... .......... .......... ..........  691K
   350K .......... .......... .......... .......... .......... 17.5M
   400K .......... .......... .......... .......... .......... 36.9M
   450K .......... .......... .......... .......... .......... 14.3M
   500K .......... .......... .......... .......... .......... 28.4M
   550K .......... .......... .......... .......... .......... 8.71M
   600K .......... .......... .......... .......... .......... 13.1M
   650K .......... .......... .......... .......... ..........  833K
   700K .......... .......... .......... .......... ..........  182M
   750K .......... .......... .......... .......... ..........  258M
   800K .......... .......... .......... .......... .......... 13.7M
   850K .......... .......... .......... .......... ..........  237M
   900K .......... .......... .......... .......... .......... 6.22M
   950K .......... .......... .......... .......... .......... 14.1M
  1000K .......... .......... .......... .......... .......... 41.8M
  1050K .......... ....                                        4.53M=0.5s

2019-03-12 07:37:40 (2.13 MB/s) - '/home/buildroot/autobuild/run/instance-3/output/build/.snappy-1.1.7.tar.gz.IblBCW/output' saved [1090550]

snappy-1.1.7.tar.gz: OK (sha256: 3dfa02e873ff51a11ee02b9ca391807f0c8ea0529a4924afa645fbf97163f9d4)
>>> snappy 1.1.7 Extracting
gzip -d -c /home/buildroot/autobuild/run/instance-3/dl/snappy/snappy-1.1.7.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7   -xf -
>>> snappy 1.1.7 Patching
>>> snappy 1.1.7 Configuring
(mkdir -p /home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7/ && cd /home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7/ && rm -f CMakeCache.txt && PATH="/home/buildroot/autobuild/run/instance-3/output/host/bin:/home/buildroot/autobuild/run/instance-3/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/snap/bin"  /home/buildroot/autobuild/run/instance-3/output/host/bin/cmake /home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7/ -DCMAKE_TOOLCHAIN_FILE="/home/buildroot/autobuild/run/instance-3/output/host/share/buildroot/toolchainfile.cmake" -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DBUILD_SHARED_LIBS=OFF  -DSNAPPY_BUILD_TESTS=OFF )
-- The C compiler identification is GNU 7.4.0
-- The CXX compiler identification is GNU 7.4.0
-- Check for working C compiler: /home/buildroot/autobuild/run/instance-3/output/host/bin/arm-linux-gcc
-- Check for working C compiler: /home/buildroot/autobuild/run/instance-3/output/host/bin/arm-linux-gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /home/buildroot/autobuild/run/instance-3/output/host/bin/arm-linux-g++
-- Check for working CXX compiler: /home/buildroot/autobuild/run/instance-3/output/host/bin/arm-linux-g++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Check if the system is big endian
-- Searching 16 bit integer
-- Looking for sys/types.h
-- Looking for sys/types.h - found
-- Looking for stdint.h
-- Looking for stdint.h - found
-- Looking for stddef.h
-- Looking for stddef.h - found
-- Check size of unsigned short
-- Check size of unsigned short - done
-- Using unsigned short
-- Check if the system is big endian - little endian
-- Looking for byteswap.h
-- Looking for byteswap.h - found
-- Looking for sys/endian.h
-- Looking for sys/endian.h - not found
-- Looking for sys/mman.h
-- Looking for sys/mman.h - found
-- Looking for sys/resource.h
-- Looking for sys/resource.h - found
-- Looking for sys/time.h
-- Looking for sys/time.h - found
-- Looking for sys/uio.h
-- Looking for sys/uio.h - found
-- Looking for unistd.h
-- Looking for unistd.h - found
-- Looking for windows.h
-- Looking for windows.h - not found
-- Looking for zlibVersion in z
-- Looking for zlibVersion in z - found
-- Looking for lzo1x_1_15_compress in lzo2
-- Looking for lzo1x_1_15_compress in lzo2 - not found
-- Performing Test HAVE_BUILTIN_EXPECT
-- Performing Test HAVE_BUILTIN_EXPECT - Success
-- Performing Test HAVE_BUILTIN_CTZ
-- Performing Test HAVE_BUILTIN_CTZ - Success
-- Looking for mmap
-- Looking for mmap - found
-- Looking for sysconf
-- Looking for sysconf - found
-- Configuring done
-- Generating done
CMake Warning:
  Manually-specified variables were not used by the project:

    BUILD_DOC
    BUILD_DOCS
    BUILD_EXAMPLE
    BUILD_EXAMPLES
    BUILD_TEST
    BUILD_TESTING
    BUILD_TESTS


-- Build files have been written to: /home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7
>>> snappy 1.1.7 Building
PATH="/home/buildroot/autobuild/run/instance-3/output/host/bin:/home/buildroot/autobuild/run/instance-3/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/snap/bin"  /usr/bin/make -j4  -C /home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7/
make[1]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7'
make[2]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7'
make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7'
Scanning dependencies of target snappy
make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7'
make[3]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7'
[ 20%] Building CXX object CMakeFiles/snappy.dir/snappy-c.cc.o
[ 60%] Building CXX object CMakeFiles/snappy.dir/snappy-stubs-internal.cc.o
[ 60%] Building CXX object CMakeFiles/snappy.dir/snappy.cc.o
[ 80%] Building CXX object CMakeFiles/snappy.dir/snappy-sinksource.cc.o
[100%] Linking CXX static library libsnappy.a
make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7'
[100%] Built target snappy
make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7'
make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7'
>>> snappy 1.1.7 Installing to staging directory
PATH="/home/buildroot/autobuild/run/instance-3/output/host/bin:/home/buildroot/autobuild/run/instance-3/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/snap/bin"  /usr/bin/make -j4  DESTDIR=/home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot install/fast -C /home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7/
make[1]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7'
Install the project...
-- Install configuration: "Release"
-- Installing: /home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libsnappy.a
-- Installing: /home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/include/snappy-c.h
-- Installing: /home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/include/snappy-sinksource.h
-- Installing: /home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/include/snappy.h
-- Installing: /home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/include/snappy-stubs-public.h
-- Installing: /home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/cmake/Snappy/SnappyTargets.cmake
-- Installing: /home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/cmake/Snappy/SnappyTargets-release.cmake
-- Installing: /home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/cmake/Snappy/SnappyConfig.cmake
-- Installing: /home/buildroot/autobuild/run/instance-3/output/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/cmake/Snappy/SnappyConfigVersion.cmake
make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7'
>>> snappy 1.1.7 Fixing libtool files
>>> snappy 1.1.7 Installing to target
PATH="/home/buildroot/autobuild/run/instance-3/output/host/bin:/home/buildroot/autobuild/run/instance-3/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/snap/bin"  /usr/bin/make -j4  DESTDIR=/home/buildroot/autobuild/run/instance-3/output/target install/fast -C /home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7/
make[1]: Entering directory '/home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7'
Install the project...
-- Install configuration: "Release"
-- Installing: /home/buildroot/autobuild/run/instance-3/output/target/usr/lib/libsnappy.a
-- Installing: /home/buildroot/autobuild/run/instance-3/output/target/usr/include/snappy-c.h
-- Installing: /home/buildroot/autobuild/run/instance-3/output/target/usr/include/snappy-sinksource.h
-- Installing: /home/buildroot/autobuild/run/instance-3/output/target/usr/include/snappy.h
-- Installing: /home/buildroot/autobuild/run/instance-3/output/target/usr/include/snappy-stubs-public.h
-- Installing: /home/buildroot/autobuild/run/instance-3/output/target/usr/lib/cmake/Snappy/SnappyTargets.cmake
-- Installing: /home/buildroot/autobuild/run/instance-3/output/target/usr/lib/cmake/Snappy/SnappyTargets-release.cmake
-- Installing: /home/buildroot/autobuild/run/instance-3/output/target/usr/lib/cmake/Snappy/SnappyConfig.cmake
-- Installing: /home/buildroot/autobuild/run/instance-3/output/target/usr/lib/cmake/Snappy/SnappyConfigVersion.cmake
make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-3/output/build/snappy-1.1.7'
>>>   Finalizing target directory
# Check files that are touched by more than one package
./support/scripts/check-uniq-files -t target /home/buildroot/autobuild/run/instance-3/output/build/packages-file-list.txt
./support/scripts/check-uniq-files -t staging /home/buildroot/autobuild/run/instance-3/output/build/packages-file-list-staging.txt
Warning: staging file "./usr/lib/libowcapi.la" is touched by more than one package: [u'owfs', u'sg3_utils', u'snappy']
Warning: staging file "./usr/lib32" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom']
Warning: staging file "./etc/resolv.conf" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom']
Warning: staging file "./usr/lib/libow.la" is touched by more than one package: [u'owfs', u'sg3_utils', u'snappy']
Warning: staging file "./usr/lib/libibrdtn.la" is touched by more than one package: [u'ibrdtn', u'libfribidi', u'libgpg-error', u'libusb', u'libiqrf', u'libksba', u'lz4', u'mtdev', u'owfs', u'sg3_utils', u'snappy']
Warning: staging file "./usr/lib/libusb-1.0.la" is touched by more than one package: [u'libusb', u'libiqrf', u'libksba', u'lz4', u'mtdev', u'owfs', u'sg3_utils', u'snappy']
Warning: staging file "./usr/lib/libmtdev.la" is touched by more than one package: [u'mtdev', u'owfs', u'sg3_utils', u'snappy']
Warning: staging file "./usr/lib/libsgutils2.la" is touched by more than one package: [u'sg3_utils', u'snappy']
Warning: staging file "./usr/lib/libownet.la" is touched by more than one package: [u'owfs', u'sg3_utils', u'snappy']
Warning: staging file "./usr/lib/libksba.la" is touched by more than one package: [u'libksba', u'lz4', u'mtdev', u'owfs', u'sg3_utils', u'snappy']
Warning: staging file "./etc/mtab" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom']
Warning: staging file "./usr/lib/libibrcommon.la" is touched by more than one package: [u'ibrcommon', u'ibrdtn', u'libfribidi', u'libgpg-error', u'libusb', u'libiqrf', u'libksba', u'lz4', u'mtdev', u'owfs', u'sg3_utils', u'snappy']
Warning: staging file "./usr/lib/libattr.la" is touched by more than one package: [u'attr', u'berkeleydb', u'ibrcommon', u'ibrdtn', u'libfribidi', u'libgpg-error', u'libusb', u'libiqrf', u'libksba', u'lz4', u'mtdev', u'owfs', u'sg3_utils', u'snappy']
Warning: staging file "./usr/lib/libfribidi.la" is touched by more than one package: [u'libfribidi', u'libgpg-error', u'libusb', u'libiqrf', u'libksba', u'lz4', u'mtdev', u'owfs', u'sg3_utils', u'snappy']
Warning: staging file "./usr/lib/libgpg-error.la" is touched by more than one package: [u'libgpg-error', u'libusb', u'libiqrf', u'libksba', u'lz4', u'mtdev', u'owfs', u'sg3_utils', u'snappy']
./support/scripts/check-uniq-files -t host /home/buildroot/autobuild/run/instance-3/output/build/packages-file-list-host.txt
Warning: host file "./share/info/dir" is touched by more than one package: [u'host-lzip', u'host-m4', u'host-libtool', u'host-autoconf', u'host-automake', u'host-bison', u'host-gettext']
Warning: host file "./arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libibrcommon.la" is touched by more than one package: [u'host-cmake', u'host-patchelf']
Warning: host file "./arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libattr.la" is touched by more than one package: [u'host-libconfuse', u'host-cmake', u'host-patchelf']
Warning: host file "./arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libibrdtn.la" is touched by more than one package: [u'host-cmake', u'host-patchelf']
Warning: host file "./arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libgpg-error.la" is touched by more than one package: [u'host-cmake', u'host-patchelf']
Warning: host file "./arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libfribidi.la" is touched by more than one package: [u'host-cmake', u'host-patchelf']
/bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L  console 0 vt100 #~' /home/buildroot/autobuild/run/instance-3/output/target/etc/inittab
/bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/autobuild/run/instance-3/output/target/etc/inittab
if grep -q CONFIG_ASH=y ./.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/run/instance-3/output/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/run/instance-3/output/target/etc/shells; fi
grep: ./.config: No such file or directory
if grep -q CONFIG_HUSH=y ./.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/run/instance-3/output/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/run/instance-3/output/target/etc/shells; fi
grep: ./.config: No such file or directory
mkdir -p /home/buildroot/autobuild/run/instance-3/output/host/etc/meson
sed -e "s%@TARGET_CROSS@%/home/buildroot/autobuild/run/instance-3/output/host/bin/arm-linux-%g" -e "s%@TARGET_ARCH@%arm%g" -e "s%@TARGET_CPU@%cortex-m4%g" -e "s%@TARGET_ENDIAN@%"little"%g" -e "s%@TARGET_CFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -O2    -Wl,-elf2flt -static`%g" -e "s%@TARGET_LDFLAGS@%`printf '"%s", '  -Wl,-elf2flt -static`%g" -e "s%@TARGET_CXXFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -O2    -Wl,-elf2flt -static  -Wl,-elf2flt -static`%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/run/instance-3/output/host%g" package/meson//cross-compilation.conf.in > /home/buildroot/autobuild/run/instance-3/output/host/etc/meson/cross-compilation.conf
mkdir -p /home/buildroot/autobuild/run/instance-3/output/target/etc
echo "buildroot" > /home/buildroot/autobuild/run/instance-3/output/target/etc/hostname
/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/run/instance-3/output/target/etc/hosts
mkdir -p /home/buildroot/autobuild/run/instance-3/output/target/etc
echo "Welcome to Buildroot" > /home/buildroot/autobuild/run/instance-3/output/target/etc/issue
/bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/run/instance-3/output/target/etc/shadow
rm -f /home/buildroot/autobuild/run/instance-3/output/target/bin/sh
rm -f /home/buildroot/autobuild/run/instance-3/output/build/locales.nopurge
for i in C en_US locale-archive; do echo $i >> /home/buildroot/autobuild/run/instance-3/output/build/locales.nopurge; done
for dir in ; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/run/instance-3/output/build/locales.nopurge || rm -rf $langdir; fi done; done
if [ -d /home/buildroot/autobuild/run/instance-3/output/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/run/instance-3/output/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/run/instance-3/output/target/usr/share/X11/locale/locale.dir; fi
rm -rf /home/buildroot/autobuild/run/instance-3/output/target/usr/include /home/buildroot/autobuild/run/instance-3/output/target/usr/share/aclocal \
	/home/buildroot/autobuild/run/instance-3/output/target/usr/lib/pkgconfig /home/buildroot/autobuild/run/instance-3/output/target/usr/share/pkgconfig \
	/home/buildroot/autobuild/run/instance-3/output/target/usr/lib/cmake /home/buildroot/autobuild/run/instance-3/output/target/usr/share/cmake
find /home/buildroot/autobuild/run/instance-3/output/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
find /home/buildroot/autobuild/run/instance-3/output/target/lib/ /home/buildroot/autobuild/run/instance-3/output/target/usr/lib/ /home/buildroot/autobuild/run/instance-3/output/target/usr/libexec/ \
	\( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
find: '/home/buildroot/autobuild/run/instance-3/output/target/usr/libexec/': No such file or directory
rm -rf /home/buildroot/autobuild/run/instance-3/output/target/usr/share/gdb
rm -rf /home/buildroot/autobuild/run/instance-3/output/target/usr/share/bash-completion
rm -rf /home/buildroot/autobuild/run/instance-3/output/target/usr/share/zsh
rm -rf /home/buildroot/autobuild/run/instance-3/output/target/usr/man /home/buildroot/autobuild/run/instance-3/output/target/usr/share/man
rm -rf /home/buildroot/autobuild/run/instance-3/output/target/usr/info /home/buildroot/autobuild/run/instance-3/output/target/usr/share/info
rm -rf /home/buildroot/autobuild/run/instance-3/output/target/usr/doc /home/buildroot/autobuild/run/instance-3/output/target/usr/share/doc
rm -rf /home/buildroot/autobuild/run/instance-3/output/target/usr/share/gtk-doc
rmdir /home/buildroot/autobuild/run/instance-3/output/target/usr/share 2>/dev/null || true
find /home/buildroot/autobuild/run/instance-3/output/target   -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/run/instance-3/output/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true
find /home/buildroot/autobuild/run/instance-3/output/target   \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/run/instance-3/output/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true
test -f /home/buildroot/autobuild/run/instance-3/output/target/etc/ld.so.conf && \
	{ echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
test -d /home/buildroot/autobuild/run/instance-3/output/target/etc/ld.so.conf.d && \
	{ echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true
mkdir -p /home/buildroot/autobuild/run/instance-3/output/target/etc
( \
	echo "NAME=Buildroot"; \
	echo "VERSION=2019.05-git-00126-gf9fd193141"; \
	echo "ID=buildroot"; \
	echo "VERSION_ID=2019.05-git"; \
	echo "PRETTY_NAME=\"Buildroot 2019.05-git\"" \
) >  /home/buildroot/autobuild/run/instance-3/output/target/usr/lib/os-release
ln -sf ../usr/lib/os-release /home/buildroot/autobuild/run/instance-3/output/target/etc
>>>   Sanitizing RPATH in target tree
/home/buildroot/autobuild/run/instance-3/buildroot/support/scripts/fix-rpath target
touch /home/buildroot/autobuild/run/instance-3/output/target/usr
make: Leaving directory '/home/buildroot/autobuild/run/instance-3/buildroot'
make: Entering directory '/home/buildroot/autobuild/run/instance-3/buildroot'
>>>   Buildroot 2019.05-git-00126-gf9fd193141 Collecting legal info
COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4)
>>> toolchain-external  Collecting legal info
>>> host-lzip 1.20 Collecting legal info
COPYING: OK (sha256: 3d77c1a58fbde5ddba612d1fe09965e20a3804953eca12e8c1892298bb8a5eef)
>>> host-skeleton  Collecting legal info
>>> skeleton  Collecting legal info
>>> skeleton-init-sysv  Collecting legal info
>>> skeleton-init-common  Collecting legal info
>>> toolchain-external-custom  Collecting legal info
>>> toolchain  Collecting legal info
>>> arp-scan 1.9 Collecting legal info
ERROR: No hash found for COPYING
>>> host-autoconf 2.69 Collecting legal info
ERROR: No hash found for COPYINGv3
ERROR: No hash found for COPYING.EXCEPTION
>>> host-libtool 2.4.6 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
ERROR: No hash found for libltdl/COPYING.LIB
>>> host-m4 1.4.18 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-automake 1.15.1 Collecting legal info
COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6)
>>> libpcap 1.9.0 Collecting legal info
LICENSE: OK (sha256: 8a54594d257e14a5260ac770f1633516cb51e3fc28c40136ce2697014eda7afd)
>>> host-bison 3.0.4 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-flex 2.6.4 Collecting legal info
COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273)
>>> host-gettext 0.19.8.1 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
ERROR: No hash found for gettext-runtime/intl/COPYING.LIB
>>> host-libxml2 2.9.9 Collecting legal info
COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd)
>>> host-pkgconf 1.5.3 Collecting legal info
ERROR: No hash found for COPYING
>>> zlib  Collecting legal info
>>> libzlib 1.2.11 Collecting legal info
README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15)
>>> attr 2.4.48 Collecting legal info
ERROR: No hash found for doc/COPYING
ERROR: No hash found for doc/COPYING.LGPL
>>> berkeleydb 5.3.28 Collecting legal info
LICENSE: OK (sha256: b78815181a53241f9347c6b47d1031fd669946f863e1edc807a291354cec024b)
>>> busybox 1.29.3 Collecting legal info
LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548)
>>> fscryptctl f037dcf4354ce8f25d0f371b58dfe7a7ac27576f Collecting legal info
LICENSE: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30)
>>> host-genimage 10 Collecting legal info
ERROR: No hash found for COPYING
>>> host-libconfuse 3.2.2 Collecting legal info
LICENSE: OK (sha256: dc3ff4b62f851dd2e94a151061ffeb7d28ddfc880a442068dc5283dbaa927306)
>>> gperf 3.0.4 Collecting legal info
ERROR: No hash found for COPYING
>>> ibrcommon 1.0.1 Collecting legal info
COPYING: OK (sha256: 1a0b57773a46d9d4cc2f0d1780a17acc38af506bb1e0234aaa85f8ccd6dc0b92)
README: OK (sha256: 9b8a430c2136ebcf76bd37f50da7d7a80ede413ec6604cc4694ea536e779854c)
>>> ibrdtn 1.0.1 Collecting legal info
ERROR: No hash found for COPYING
>>> ibrdtnd 1.0.1 Collecting legal info
ERROR: No hash found for COPYING
>>> initscripts  Collecting legal info
>>> jhead 3.00 Collecting legal info
ERROR: No hash found for readme.txt
>>> libfribidi 0.19.7 Collecting legal info
ERROR: No hash found for COPYING
>>> libgpg-error 1.33 Collecting legal info
COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c)
COPYING.LIB: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861)
>>> libiqrf v0.1.2 Collecting legal info
>>> host-cmake 3.8.2 Collecting legal info
ERROR: No hash found for Copyright.txt
>>> libusb 1.0.22 Collecting legal info
COPYING: OK (sha256: 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a)
>>> libksba 1.3.5 Collecting legal info
AUTHORS: OK (sha256: 240908e1356ffeb5d0730227b6198dcc8e878375d28632fd813e0ed75b35ccc2)
COPYING: OK (sha256: 6197b98c6bf69838c624809c509d84333de1bc847155168c0e84527446a27076)
COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
COPYING.GPLv3: OK (sha256: 0abbff814cd00e2b0b6d08395af2b419c1a92026c4b4adacbb65ccda45fa58cf)
COPYING.LGPLv3: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768)
>>> lz4 v1.8.3 Collecting legal info
lib/LICENSE: OK (sha256: d15d99c8dc6b0ec22174c0e563a95bc40f9363ca7f9d9d793bb5c5a8e8d0af71)
programs/COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> mtdev 1.1.4 Collecting legal info
ERROR: No hash found for COPYING
>>> owfs 3.2p2 Collecting legal info
COPYING: OK (sha256: e484a24fa5d177576e1672306165f495633bd5f0daaf628d1ff5ecfc85bdc637)
COPYING.LIB: OK (sha256: 3879dcca586c08d1fe3325f3a0aec5b47d543100bc6b1dfb30bf24ec48675b10)
>>> host-patchelf 0.9 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> sg3_utils 1.44 Collecting legal info
COPYING: OK (sha256: d516b8b337a77e3d4c65dffe708ca7fb25b1cb4ec77ec362cf11ed659b9250bc)
BSD_LICENSE: OK (sha256: 31f6d59679e0fb21c9358f22484e6e3c53e20ef08c0950fd38a4a867cb55edc9)
>>> snappy 1.1.7 Collecting legal info
COPYING: OK (sha256: 55172044f7e241207117448a4d9d6ba1d0925c8ad66b5d4c08c70adfa9cc3de6)
WARNING: the Buildroot source code has not been saved
WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined)
WARNING: libiqrf-v0.1.2: cannot save license (LIBIQRF_LICENSE_FILES not defined)
Legal info produced in /home/buildroot/autobuild/run/instance-3/output/legal-info
make: Leaving directory '/home/buildroot/autobuild/run/instance-3/buildroot'