patching file util.h Applying 0002-link-with-latomic-if-needed.patch using patch: patching file Makefile.am patching file configure.ac patching file numa.pc.in >>> numactl 2.0.14 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14 -name $file); do cp support/gnuconfig/$file $i; done; done >>> numactl 2.0.14 Configuring >>> numactl 2.0.14 Autoreconfiguring libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'. libtoolize: copying file 'build-aux/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:20: warning: The macro `AC_TRY_COMPILE' is obsolete. configure.ac:20: You should run autoupdate. ./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from... lib/m4sugar/m4sh.m4:594: AS_CASE is expanded from... lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from... lib/m4sugar/m4sh.m4:699: AS_IF is expanded from... ./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... m4/ax_tls.m4:49: AX_TLS is expanded from... configure.ac:20: the top level configure.ac:13: installing 'build-aux/compile' configure.ac:13: installing 'build-aux/config.guess' configure.ac:13: installing 'build-aux/config.sub' configure.ac:9: installing 'build-aux/install-sh' configure.ac:9: installing 'build-aux/missing' Makefile.am: installing 'build-aux/depcomp' parallel-tests: installing 'build-aux/test-driver' >>> numactl 2.0.14 Patching libtool patching file /home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14/build-aux/ltmain.sh Hunk #1 succeeded at 2694 (offset 7 lines). Hunk #2 succeeded at 4284 (offset 7 lines). Hunk #3 succeeded at 6579 (offset 25 lines). Hunk #4 succeeded at 6589 (offset 25 lines). Hunk #5 succeeded at 6882 (offset 25 lines). Hunk #6 succeeded at 7174 (offset 25 lines). Hunk #7 succeeded at 8140 (offset 28 lines). Hunk #8 succeeded at 10769 (offset 59 lines). (cd /home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14/ && rm -rf config.cache && PATH="/home/buildroot/autobuild/instance-2/output-1/host/bin:/home/buildroot/autobuild/instance-2/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" AR="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-ar" AS="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-as" LD="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-ld" NM="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-nm" CC="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc" GCC="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc" CPP="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-cpp" CXX="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-g++" FC="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gfortran" F77="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gfortran" RANLIB="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-ranlib" READELF="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-readelf" STRIP="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-strip" OBJCOPY="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-objcopy" OBJDUMP="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/instance-2/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-2/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-2/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/instance-2/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-2/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-as" DEFAULT_LINKER="/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 " LDFLAGS="" FCFLAGS=" -Os -g0" FFLAGS=" -Os -g0" PKG_CONFIG="/home/buildroot/autobuild/instance-2/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -fPIC" CONFIG_SITE=/dev/null ./configure --target=arm-buildroot-linux-uclibcgnueabihf --host=arm-buildroot-linux-uclibcgnueabihf --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-buildroot-linux-uclibcgnueabihf-strip... /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-strip checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking build system type... x86_64-pc-linux-gnu checking host system type... arm-buildroot-linux-uclibcgnueabihf checking how to print strings... printf checking whether make supports the include directive... yes (GNU style) checking for arm-buildroot-linux-uclibcgnueabihf-gcc... /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc accepts -g... yes checking for /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc option to enable C11 features... none needed checking whether /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc understands -c and -o together... yes checking dependency style of /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc... none checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc... /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-ld checking if the linker (/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-nm checking the name lister (/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to arm-buildroot-linux-uclibcgnueabihf format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-ld option to reload object files... -r checking for arm-buildroot-linux-uclibcgnueabihf-objdump... /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-objdump checking how to recognize dependent libraries... pass_all checking for arm-buildroot-linux-uclibcgnueabihf-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for arm-buildroot-linux-uclibcgnueabihf-ar... /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-ar checking for archiver @FILE support... @ checking for arm-buildroot-linux-uclibcgnueabihf-strip... (cached) /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-strip checking for arm-buildroot-linux-uclibcgnueabihf-ranlib... /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-ranlib checking command to parse /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-nm output from /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for arm-buildroot-linux-uclibcgnueabihf-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc supports -fno-rtti -fno-exceptions... no checking for /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc option to produce PIC... -fPIC -DPIC checking if /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc PIC flag -fPIC -DPIC works... yes checking if /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc static flag -static works... yes checking if /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc supports -c -o file.o... yes checking if /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc supports -c -o file.o... (cached) yes checking whether the /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc linker (/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for arm-buildroot-linux-uclibcgnueabihf-gcc... (cached) /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc checking whether the compiler supports GNU C... (cached) yes checking whether /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc accepts -g... (cached) yes checking for /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc option to enable C11 features... (cached) none needed checking whether /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc understands -c and -o together... (cached) yes checking dependency style of /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc... (cached) none checking for thread local storage (TLS) class... __thread checking whether C compiler accepts -ftree-vectorize... yes checking for library containing __atomic_fetch_and_1... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls >>> numactl 2.0.14 Building PATH="/home/buildroot/autobuild/instance-2/output-1/host/bin:/home/buildroot/autobuild/instance-2/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14/ make[1]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14' /usr/bin/make all-am make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14' CC numactl.o CC util.o CC shm.o CC libnuma.lo CC syscall.lo CC distance.lo CC affinity.lo CC sysfs.lo CC rtnetlink.lo CC numastat-numastat.o CC numademo-numademo.o CC numademo-stream_lib.o numastat.c: In function 'fmt_cell_data': numastat.c:515:50: warning: format '%ld' expects argument of type 'long int', but argument 4 has type 'int64_t' {aka 'long long int'} [-Wformat=] 515 | snprintf(buf, SMALL_BUF_SIZE, "%ld", c_ptr->l); | ~~^ ~~~~~~~~ | | | | long int int64_t {aka long long int} | %lld numademo.c: In function 'main': numademo.c:556:51: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'unsigned int' [-Wformat=] 556 | fprintf(stderr, "You must set msize at least %lu bytes for ptrchase test.\n", | ~~^ | | | long unsigned int | %u 557 | sizeof(union node)); | ~~~~~~~~~~~~~~~~~~ | | | unsigned int CC numademo-mt.o CC numademo-clearcache.o clearcache.c: In function 'clearcache': clearcache.c:74:2: warning: #warning "Consider adding a clearcache implementation for your architecture" [-Wcpp] 74 | #warning "Consider adding a clearcache implementation for your architecture" | ^~~~~~~ CC migratepages.o CC migspeed.o CC memhog.o GEN numa.pc CCLD libnuma.la CCLD numastat CCLD numactl CCLD numademo CCLD migratepages CCLD migspeed CCLD memhog make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14' make[1]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14' >>> numactl 2.0.14 Installing to staging directory PATH="/home/buildroot/autobuild/instance-2/output-1/host/bin:/home/buildroot/autobuild/instance-2/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot install -C /home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14/ make[1]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14' make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14' /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include' /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/share/man/man2' /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/share/man/man3' /bin/bash ./libtool --mode=install /usr/bin/install -c libnuma.la '/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib' /usr/bin/install -c -m 644 numa.h numacompat1.h numaif.h '/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include' /usr/bin/install -c -m 644 move_pages.2 '/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/share/man/man2' /usr/bin/install -c -m 644 numa.3 '/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/share/man/man3' /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/share/man/man8' /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/pkgconfig' /usr/bin/install -c -m 644 numa.pc '/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/pkgconfig' /usr/bin/install -c -m 644 numactl.8 numastat.8 migratepages.8 migspeed.8 memhog.8 '/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/share/man/man8' libtool: install: /usr/bin/install -c .libs/libnuma.so.1.0.0 /home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/libnuma.so.1.0.0 libtool: install: (cd /home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib && { ln -s -f libnuma.so.1.0.0 libnuma.so.1 || { rm -f libnuma.so.1 && ln -s libnuma.so.1.0.0 libnuma.so.1; }; }) libtool: install: (cd /home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib && { ln -s -f libnuma.so.1.0.0 libnuma.so || { rm -f libnuma.so && ln -s libnuma.so.1.0.0 libnuma.so; }; }) libtool: install: /usr/bin/install -c .libs/libnuma.lai /home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/libnuma.la libtool: warning: remember to run 'libtool --finish /usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin' /bin/bash ./libtool --mode=install /usr/bin/install -c numactl numastat numademo migratepages migspeed memhog '/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin' libtool: install: /usr/bin/install -c numactl /home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin/numactl libtool: install: /usr/bin/install -c numastat /home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin/numastat libtool: install: /usr/bin/install -c numademo /home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin/numademo libtool: install: /usr/bin/install -c migratepages /home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin/migratepages libtool: install: /usr/bin/install -c migspeed /home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin/migspeed libtool: install: /usr/bin/install -c memhog /home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin/memhog make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14' make[1]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14' >>> numactl 2.0.14 Fixing libtool files for la in $(find /home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/autobuild/instance-2/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot:@STAGING_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/autobuild/instance-2/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> numactl 2.0.14 Installing to target PATH="/home/buildroot/autobuild/instance-2/output-1/host/bin:/home/buildroot/autobuild/instance-2/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-2/output-1/target install -C /home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14/ make[1]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14' make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14' /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/target/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/target/usr/include' /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man2' /bin/bash ./libtool --mode=install /usr/bin/install -c libnuma.la '/home/buildroot/autobuild/instance-2/output-1/target/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man3' /usr/bin/install -c -m 644 numa.h numacompat1.h numaif.h '/home/buildroot/autobuild/instance-2/output-1/target/usr/include' /usr/bin/install -c -m 644 numa.3 '/home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man3' /usr/bin/install -c -m 644 move_pages.2 '/home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man2' /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man8' /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/target/usr/lib/pkgconfig' /usr/bin/install -c -m 644 numa.pc '/home/buildroot/autobuild/instance-2/output-1/target/usr/lib/pkgconfig' /usr/bin/install -c -m 644 numactl.8 numastat.8 migratepages.8 migspeed.8 memhog.8 '/home/buildroot/autobuild/instance-2/output-1/target/usr/share/man/man8' libtool: install: /usr/bin/install -c .libs/libnuma.so.1.0.0 /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/libnuma.so.1.0.0 libtool: install: (cd /home/buildroot/autobuild/instance-2/output-1/target/usr/lib && { ln -s -f libnuma.so.1.0.0 libnuma.so.1 || { rm -f libnuma.so.1 && ln -s libnuma.so.1.0.0 libnuma.so.1; }; }) libtool: install: (cd /home/buildroot/autobuild/instance-2/output-1/target/usr/lib && { ln -s -f libnuma.so.1.0.0 libnuma.so || { rm -f libnuma.so && ln -s libnuma.so.1.0.0 libnuma.so; }; }) libtool: install: /usr/bin/install -c .libs/libnuma.lai /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/libnuma.la libtool: warning: remember to run 'libtool --finish /usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/target/usr/bin' /bin/bash ./libtool --mode=install /usr/bin/install -c numactl numastat numademo migratepages migspeed memhog '/home/buildroot/autobuild/instance-2/output-1/target/usr/bin' libtool: install: /usr/bin/install -c numactl /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/numactl libtool: install: /usr/bin/install -c numastat /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/numastat libtool: install: /usr/bin/install -c numademo /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/numademo libtool: install: /usr/bin/install -c migratepages /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/migratepages libtool: install: /usr/bin/install -c migspeed /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/migspeed libtool: install: /usr/bin/install -c memhog /home/buildroot/autobuild/instance-2/output-1/target/usr/bin/memhog make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14' make[1]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/numactl-2.0.14' patchelf-0.9.tar.bz2: OK (sha256: a0f65c1ba148890e9f2f7823f4bedf7ecad5417772f64f994004f59a39014f83) >>> host-patchelf 0.9 Extracting bzcat /home/buildroot/autobuild/instance-2/dl/patchelf/patchelf-0.9.tar.bz2 | tar --strip-components=1 -C /home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9 -xf - >>> host-patchelf 0.9 Patching Applying 0001-Remove-apparently-incorrect-usage-of-static.patch using patch: patching file src/patchelf.cc Applying 0002-Extract-a-function-for-splitting-a-colon-separated-s.patch using patch: patching file src/patchelf.cc Applying 0003-Add-option-to-make-the-rpath-relative-under-a-specif.patch using patch: patching file src/patchelf.cc Applying 0004-patchelf-Check-ELF-endianness-before-writing-new-run.patch using patch: patching file src/patchelf.cc Hunk #1 succeeded at 1309 (offset -6 lines). Applying 0005-Avoid-inflating-file-sizes-needlessly-and-allow-bina.patch using patch: patching file src/patchelf.cc Applying 0006-Fix-shared-library-corruption-when-rerunning-patchel.patch using patch: patching file src/patchelf.cc Applying 0007-fix-adjusting-startPage.patch using patch: patching file src/patchelf.cc Applying 0008-Use-sh_offset-instead-of-sh_addr-when-checking-alrea.patch using patch: patching file src/patchelf.cc Applying 0009-Fix-issue-66-by-ignoring-the-first-section-header-wh.patch using patch: patching file src/patchelf.cc Applying 0010-Fix-endianness-issues-for-powerpc-PIE.patch using patch: patching file src/patchelf.cc >>> host-patchelf 0.9 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9 -name $file); do cp support/gnuconfig/$file $i; done; done >>> host-patchelf 0.9 Patching libtool >>> host-patchelf 0.9 Configuring (cd /home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9/ && rm -rf config.cache; PATH="/home/buildroot/autobuild/instance-2/output-1/host/bin:/home/buildroot/autobuild/instance-2/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PKG_CONFIG="/home/buildroot/autobuild/instance-2/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/autobuild/instance-2/output-1/host/lib/pkgconfig:/home/buildroot/autobuild/instance-2/output-1/host/share/pkgconfig" AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld" NM="/usr/bin/nm" CC="/usr/bin/gcc" GCC="/usr/bin/gcc" CXX="/usr/bin/g++" CPP="/usr/bin/cpp" OBJCOPY="/usr/bin/objcopy" RANLIB="/usr/bin/ranlib" CPPFLAGS="-I/home/buildroot/autobuild/instance-2/output-1/host/include" CFLAGS="-O2 -I/home/buildroot/autobuild/instance-2/output-1/host/include" CXXFLAGS="-O2 -I/home/buildroot/autobuild/instance-2/output-1/host/include" LDFLAGS="-L/home/buildroot/autobuild/instance-2/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-2/output-1/host/lib" INTLTOOL_PERL=/usr/bin/perl CFLAGS="-O2 -I/home/buildroot/autobuild/instance-2/output-1/host/include" LDFLAGS="-L/home/buildroot/autobuild/instance-2/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-2/output-1/host/lib" CONFIG_SITE=/dev/null ./configure --prefix="/home/buildroot/autobuild/instance-2/output-1/host" --sysconfdir="/home/buildroot/autobuild/instance-2/output-1/host/etc" --localstatedir="/home/buildroot/autobuild/instance-2/output-1/host/var" --enable-shared --disable-static --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --disable-debug --with-xmlto=no --with-fop=no --disable-nls --disable-dependency-tracking ) configure: WARNING: unrecognized options: --enable-shared, --disable-static, --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --disable-debug, --with-xmlto, --with-fop, --disable-nls checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for style of include used by make... GNU checking for gcc... /usr/bin/gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /usr/bin/gcc accepts -g... yes checking for /usr/bin/gcc option to accept ISO C89... none needed checking whether /usr/bin/gcc understands -c and -o together... yes checking dependency style of /usr/bin/gcc... none checking whether we are using the GNU C++ compiler... yes checking whether /usr/bin/g++ accepts -g... yes checking dependency style of /usr/bin/g++... none Setting page size to 4096 checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating tests/Makefile config.status: creating patchelf.spec config.status: executing depfiles commands configure: WARNING: unrecognized options: --enable-shared, --disable-static, --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --disable-debug, --with-xmlto, --with-fop, --disable-nls >>> host-patchelf 0.9 Building PATH="/home/buildroot/autobuild/instance-2/output-1/host/bin:/home/buildroot/autobuild/instance-2/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PKG_CONFIG="/home/buildroot/autobuild/instance-2/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/autobuild/instance-2/output-1/host/lib/pkgconfig:/home/buildroot/autobuild/instance-2/output-1/host/share/pkgconfig" /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9/ make[1]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9' Making all in src make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9/src' /usr/bin/g++ -DPACKAGE_NAME=\"patchelf\" -DPACKAGE_TARNAME=\"patchelf\" -DPACKAGE_VERSION=\"0.9\" -DPACKAGE_STRING=\"patchelf\ 0.9\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"patchelf\" -DVERSION=\"0.9\" -DPAGESIZE=4096 -I. -I/home/buildroot/autobuild/instance-2/output-1/host/include -Wall -O2 -I/home/buildroot/autobuild/instance-2/output-1/host/include -c -o patchelf.o patchelf.cc /usr/bin/g++ -Wall -O2 -I/home/buildroot/autobuild/instance-2/output-1/host/include -L/home/buildroot/autobuild/instance-2/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-2/output-1/host/lib -o patchelf patchelf.o make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9/src' Making all in tests make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9/tests' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9/tests' make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9' make[1]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9' >>> host-patchelf 0.9 Installing to host directory PATH="/home/buildroot/autobuild/instance-2/output-1/host/bin:/home/buildroot/autobuild/instance-2/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PKG_CONFIG="/home/buildroot/autobuild/instance-2/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/autobuild/instance-2/output-1/host/lib/pkgconfig:/home/buildroot/autobuild/instance-2/output-1/host/share/pkgconfig" /usr/bin/make -j4 install -C /home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9/ make[1]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9' Making install in src make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9/src' make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9/src' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/host/bin' /usr/bin/install -c patchelf '/home/buildroot/autobuild/instance-2/output-1/host/bin' make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9/src' make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9/src' Making install in tests make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9/tests' make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9/tests' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9/tests' make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9/tests' make[2]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9' make[3]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/host/share/doc/patchelf' /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/host/share/man/man1' /usr/bin/install -c -m 644 README '/home/buildroot/autobuild/instance-2/output-1/host/share/doc/patchelf' /usr/bin/install -c -m 644 patchelf.1 '/home/buildroot/autobuild/instance-2/output-1/host/share/man/man1' make[3]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9' make[2]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9' make[1]: Leaving directory '/home/buildroot/autobuild/instance-2/output-1/build/host-patchelf-0.9' >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/buildroot/autobuild/instance-2/output-1/host/etc/meson sed -e 's%@TARGET_CROSS@%/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-%g' -e 's%@TARGET_ARCH@%arm%g' -e 's%@TARGET_CPU@%arm1176jzf-s%g' -e 's%@TARGET_ENDIAN@%little%g' -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os', '-g0'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os', '-g0'@PKG_TARGET_CFLAGS@%g" -e 's%@HOST_DIR@%/home/buildroot/autobuild/instance-2/output-1/host%g' -e 's%@STAGING_DIR@%/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot%g' -e 's%@STATIC@%false%g' package/meson//cross-compilation.conf.in > /home/buildroot/autobuild/instance-2/output-1/host/etc/meson/cross-compilation.conf.in sed -e 's%@PKG_TARGET_CFLAGS@%%g' -e 's%@PKG_TARGET_LDFLAGS@%%g' -e 's%@PKG_TARGET_CXXFLAGS@%%g' /home/buildroot/autobuild/instance-2/output-1/host/etc/meson/cross-compilation.conf.in > /home/buildroot/autobuild/instance-2/output-1/host/etc/meson/cross-compilation.conf /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/buildroot/autobuild/instance-2/output-1/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/autobuild/instance-2/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /home/buildroot/autobuild/instance-2/output-1/build/busybox-1.34.1/.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/instance-2/output-1/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/instance-2/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/buildroot/autobuild/instance-2/output-1/build/busybox-1.34.1/.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/instance-2/output-1/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/instance-2/output-1/target/etc/shells; fi mkdir -p /home/buildroot/autobuild/instance-2/output-1/target/etc echo "buildroot" > /home/buildroot/autobuild/instance-2/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/instance-2/output-1/target/etc/hosts mkdir -p /home/buildroot/autobuild/instance-2/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/instance-2/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/instance-2/output-1/target/etc/shadow rm -f /home/buildroot/autobuild/instance-2/output-1/target/bin/sh if [ -x /home/buildroot/autobuild/instance-2/output-1/target/sbin/swapon -a -x /home/buildroot/autobuild/instance-2/output-1/target/sbin/swapoff ]; then /bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/buildroot/autobuild/instance-2/output-1/target/etc/inittab; else /bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/buildroot/autobuild/instance-2/output-1/target/etc/inittab; fi printf '%s\n' C en_US locale-archive > /home/buildroot/autobuild/instance-2/output-1/build/locales.nopurge for dir in /home/buildroot/autobuild/instance-2/output-1/target/usr/share/locale /home/buildroot/autobuild/instance-2/output-1/target/usr/share/X11/locale /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/instance-2/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/autobuild/instance-2/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/instance-2/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/instance-2/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/include /home/buildroot/autobuild/instance-2/output-1/target/usr/share/aclocal \ /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/pkgconfig /home/buildroot/autobuild/instance-2/output-1/target/usr/share/pkgconfig \ /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/cmake /home/buildroot/autobuild/instance-2/output-1/target/usr/share/cmake \ /home/buildroot/autobuild/instance-2/output-1/target/usr/doc find /home/buildroot/autobuild/instance-2/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/instance-2/output-1/target/lib/ /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/ /home/buildroot/autobuild/instance-2/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f find: '/home/buildroot/autobuild/instance-2/output-1/target/usr/libexec/': No such file or directory rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/share/gdb rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/share/bash-completion rm -rf /home/buildroot/autobuild/instance-2/output-1/target/etc/bash_completion.d rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/share/zsh rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/man /home/buildroot/autobuild/instance-2/output-1/target/usr/share/man rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/info /home/buildroot/autobuild/instance-2/output-1/target/usr/share/info rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/doc /home/buildroot/autobuild/instance-2/output-1/target/usr/share/doc rm -rf /home/buildroot/autobuild/instance-2/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/instance-2/output-1/target/usr/share 2>/dev/null || true rm -rf /home/buildroot/autobuild/instance-2/output-1/target/lib/debug /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/debug find /home/buildroot/autobuild/instance-2/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/buildroot/autobuild/instance-2/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/buildroot/autobuild/instance-2/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/instance-2/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/instance-2/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2021.05-2682-gc224e7e5c6"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2021.11-rc2"; \ echo "PRETTY_NAME=\"Buildroot 2021.11-rc2\"" \ ) > /home/buildroot/autobuild/instance-2/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/instance-2/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/buildroot/autobuild/instance-2/output-1/per-package /home/buildroot/autobuild/instance-2/buildroot/support/scripts/fix-rpath target touch /home/buildroot/autobuild/instance-2/output-1/target/usr ln -snf /home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot /home/buildroot/autobuild/instance-2/output-1/staging make: Leaving directory '/home/buildroot/autobuild/instance-2/buildroot' make: Entering directory '/home/buildroot/autobuild/instance-2/buildroot' >>> Buildroot 2021.05-2682-gc224e7e5c6 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-custom Collecting legal info >>> toolchain Collecting legal info >>> bdwgc 8.0.4 Collecting legal info README.QUICK: OK (sha256: aeeaabbf44e67d413e18719f0c6ac9c23387ab0b33e7a15ee46cf59ddef12cc7) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> libatomic_ops 7.6.12 Collecting legal info doc/LICENSING.txt: OK (sha256: f0e630c0ca489767033da5a0c869fb4231db522c5ff479ce55a853a923a00f69) COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-autoconf 2.71 Collecting legal info COPYINGv3: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) COPYING.EXCEPTION: OK (sha256: 1f1cde9fb68b9b3cff18c420894bec5bd4defacd700b7d13df54a887301e5350) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-m4 1.4.19 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-automake 1.16.5 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> busybox 1.34.1 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f) >>> dieharder 3.31.1 Collecting legal info COPYING: OK (sha256: c475bcd1afa6fc15a65174e31c599c0d23706a34e4b9f2fcb03a4dad5438d53f) >>> gsl 2.6 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> initscripts Collecting legal info >>> libdmtx 0.7.5 Collecting legal info LICENSE: OK (sha256: fcc277b7302645322c63de22b9b0bdae2df3dfa7d6cbc0d5bed7a4d3f1a9af79) >>> libexif 0.6.23 Collecting legal info COPYING: OK (sha256: 36b6d3fa47916943fd5fec313c584784946047ec1337a78b440e5992cb595f89) >>> libubox d716ac4bc4236031d4c3cc1ed362b502e20e3787 Collecting legal info >>> host-cmake 3.16.9 Collecting legal info Copyright.txt: OK (sha256: dc628fb936a5d229296d42083f9a8218aa32204c016919e784404c9ec58776e9) >>> murata-cyw-fw 8d87950bfad28c65926695b7357bd8995b60016a Collecting legal info LICENCE.cypress: OK (sha256: 3a892759b73e8b459f1a750954b316118b0061fd9d1868d11fa258c104ee7e0c) >>> numactl 2.0.14 Collecting legal info README.md: OK (sha256: e2b738b1303c088421b09933a78c1326fe43692e2c05a7c510a2eb7e7a8eb575) >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined) WARNING: libubox-d716ac4bc4236031d4c3cc1ed362b502e20e3787: cannot save license (LIBUBOX_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/instance-2/output-1/legal-info make: Leaving directory '/home/buildroot/autobuild/instance-2/buildroot'