checking for library containing sched_yield... none required
checking how to make dynamic loadable module... ok
checking linker takes --rpath flag... yes
checking linker takes --soname flag... yes
checking for iconv.h... yes
  CXX    dwarf2/loc.o
checking for gdbm.h... no
checking for ndbm.h... no
checking for gdbm/ndbm.h... no
checking for gdbm-ndbm.h... no
checking for dbm.h... no
checking for gdbm/dbm.h... no
checking for gdbm-dbm.h... no
checking for IPv6... yes
checking for struct sockaddr_storage... yes
checking for net/if.h... yes
checking for struct ifreq... yes
checking for struct ifreq.ifr_ifindex... yes
checking for struct ifreq.ifr_index... no
checking for struct ifreq.ifr_netmask... yes
checking for struct sockaddr_un.sun_len... no
checking for struct sockaddr_in.sin_len... no
checking for struct sockaddr_in6.sin6_len... no
checking for library containing shutdown... none required
checking for library containing gethostbyname_r... none required
checking for gethostbyname_r... yes
checking number of arguments for gethostbyname_r... 6
checking for gethostbyaddr_r... yes
checking number of arguments for gethostbyaddr_r... 8
checking for getprotobyname_r... yes
checking number of arguments for getprotobyname_r... 5
checking for getprotobynumber_r...   CXX    dwarf2/macro.o
yes
checking number of arguments for getprotobynumber_r... 5
checking for getservbyname_r... yes
checking for getservbyname_r... (cached) yes
checking number of arguments for getservbyname_r... 6
checking for getservbyport_r... yes
checking number of arguments for getservbyport_r... 6
checking for socklen_t... yes
checking for mbedtls/net_sockets.h... yes
checking for library containing mbedtls_ctr_drbg_init... -lmbedcrypto
checking for library containing mbedtls_x509_crt_init... -lmbedx509
checking for library containing mbedtls_ssl_init... -lmbedtls
checking for openssl... openssl
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating src/genconfig
config.status: creating src/makeverslink
config.status: creating lib/Makefile
config.status: creating doc/gosh.1
config.status: creating doc/gauche-config.1
config.status: creating doc/gauche-cesconv.1
config.status: creating doc/gauche-install.1
config.status: creating doc/gauche-package.1
config.status: creating doc/Makefile
config.status: creating ext/Makefile
config.status: creating ext/Makefile.ext
config.status: creating ext/bcrypt/Makefile
config.status: creating ext/binary/Makefile
config.status: creating ext/charconv/Makefile
config.status: creating ext/charconv/charconv.h
config.status: creating ext/data/Makefile
config.status: creating ext/dbm/Makefile
config.status: creating ext/digest/Makefile
config.status: creating ext/fcntl/Makefile
config.status: creating ext/file/Makefile
config.status: creating ext/gauche/Makefile
config.status: creating ext/mt-random/Makefile
config.status: creating ext/net/Makefile
config.status: creating ext/peg/Makefile
config.status: creating ext/sparse/Makefile
config.status: creating ext/srfi/Makefile
config.status: creating ext/sxml/Makefile
config.status: creating ext/syslog/Makefile
config.status: creating ext/tls/Makefile
config.status: creating ext/termios/Makefile
config.status: creating ext/text/Makefile
config.status: creating ext/threads/Makefile
config.status: creating ext/util/Makefile
config.status: creating ext/uvector/Makefile
config.status: creating ext/vport/Makefile
config.status: creating ext/rfc/Makefile
config.status: creating ext/zlib/Makefile
config.status: creating ext/windows/Makefile
config.status: creating examples/Makefile
config.status: creating examples/standalone/Makefile
  CXX    dwarf2/read.o
config.status: creating gc/configure.gnu-gauche
config.status: creating src/gauche/config.h
config.status: creating ext/dbm/dbmconf.h
config.status: executing VERSION commands
config.status: executing src/features commands
  CXX    dwarf2/section.o
=== configuring in gc (/home/peko/autobuild/instance-1/output-1/build/host-gauche-0.9.9/gc)
configure: running /bin/bash ./configure.gnu --disable-option-checking '--prefix=/home/peko/autobuild/instance-1/output-1/per-package/host-gauche/host'  '--sysconfdir=/home/peko/autobuild/instance-1/output-1/per-package/host-gauche/host/etc' '--localstatedir=/home/peko/autobuild/instance-1/output-1/per-package/host-gauche/host/var' '--enable-shared' '--disable-static' '--disable-gtk-doc' '--disable-gtk-doc-html' '--disable-doc' '--disable-docs' '--disable-documentation' '--disable-debug' '--with-xmlto=no' '--with-fop=no' '--disable-nls' '--disable-dependency-tracking' '--without-zlib' 'CC=/usr/bin/gcc' 'CFLAGS=-O2 -I/home/peko/autobuild/instance-1/output-1/per-package/host-gauche/host/include' 'LDFLAGS=-L/home/peko/autobuild/instance-1/output-1/per-package/host-gauche/host/lib -Wl,-rpath,/home/peko/autobuild/instance-1/output-1/per-package/host-gauche/host/lib' 'CPPFLAGS=-I/home/peko/autobuild/instance-1/output-1/per-package/host-gauche/host/include' 'CPP=/usr/bin/cpp' '--enable-multibyte=utf-8' --cache-file=/dev/null --srcdir=.
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking target system type... x86_64-pc-linux-gnu
checking GC version numbers... major=8 minor=0                 micro=4
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports the include directive... yes (GNU style)
checking for gcc... /usr/bin/gcc
checking whether the C compiler works...   CXX    dwarf2/stringify.o
yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether /usr/bin/gcc accepts -g... yes
checking for /usr/bin/gcc option to enable C11 features... none needed
checking whether /usr/bin/gcc understands -c and -o together... yes
checking dependency style of /usr/bin/gcc... none
checking whether the compiler supports GNU C++... yes
checking whether /usr/bin/g++ accepts -g... yes
checking for /usr/bin/g++ option to enable C++11 features... none needed
checking dependency style of /usr/bin/g++... none
checking dependency style of /usr/bin/gcc... none
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by /usr/bin/gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm
checking the name lister (/usr/bin/nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... /usr/bin/ranlib
checking command to parse /usr/bin/nm output from /usr/bin/gcc object...   CXX    elfread.o
ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
  CXX    eval.o
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /usr/bin/gcc supports -fno-rtti -fno-exceptions... no
checking for /usr/bin/gcc option to produce PIC... -fPIC -DPIC
checking if /usr/bin/gcc PIC flag -fPIC -DPIC works... yes
checking if /usr/bin/gcc static flag -static works... yes
checking if /usr/bin/gcc supports -c -o file.o... yes
checking if /usr/bin/gcc supports -c -o file.o... (cached) yes
checking whether the /usr/bin/gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking how to run the C++ preprocessor... /usr/bin/g++ -E
checking for ld used by /usr/bin/g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the /usr/bin/g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for /usr/bin/g++ option to produce PIC... -fPIC -DPIC
checking if /usr/bin/g++ PIC flag -fPIC -DPIC works... yes
checking if /usr/bin/g++ static flag -static works... yes
checking if /usr/bin/g++ supports -c -o file.o... yes
checking if /usr/bin/g++ supports -c -o file.o... (cached) yes
checking whether the /usr/bin/g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for inline... inline
configure: WARNING: "Explicit GC_INIT() calls may be required."
checking for pthread_self in -lpthread... yes
checking whether compiler supports -Wextra... yes
checking whether compiler supports -Wpedantic... yes
checking for xlc... no
checking whether compiler supports -fno-strict-aliasing... yes
checking for getcontext... yes
checking for dl_iterate_phdr... yes
checking for dlopen in -ldl... yes
checking for execinfo.h... yes
checking whether to build shared libraries... yes
checking whether compiler supports -fvisibility... yes
checking which machine-dependent code should be used... 
checking whether Solaris gcc optimization fix is necessary... no
checking for dladdr... yes
checking for sigsetjmp... yes
checking for sys/dg_sys_info.h... no
checking for compiler intrinsics support... yes
checking which libatomic_ops to use... none
  CXX    event-top.o
checking that generated files are newer than configure... done
configure: creating ./config.status
  CXX    exceptions.o
config.status: creating Makefile
config.status: creating bdw-gc.pc
config.status: creating include/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands

This Gauche has been configured with the following parameters:
           version: 0.9.9
         multibyte: utf8
              slib: /usr/local/slib
            thread: pthreads
           tls/ssl: mbedtls axtls 
          CA store: none 
  optional modules:  

  CXX    exec.o
  CXX    expprint.o
  CXX    extension.o
  CXX    f-exp.o
  CXX    f-lang.o
  CXX    f-typeprint.o
  CXX    f-valprint.o
  CXX    filename-seen-cache.o
  CXX    filesystem.o
  CXX    findcmd.o
  CXX    findvar.o
  CXX    frame-base.o
  CXX    frame-unwind.o
  CXX    frame.o
  CXX    gcore.o
  CXX    gdb-demangle.o
  CXX    gdb_bfd.o
  CXX    gdb_obstack.o
  CXX    gdb_regex.o
  CXX    gdbarch.o
  CXX    gdbtypes.o
  CXX    glibc-tdep.o
  CXX    gnu-v2-abi.o
  CXX    gnu-v3-abi.o
  CXX    go-exp.o
  CXX    go-lang.o
  CXX    go-typeprint.o
  CXX    go-valprint.o
  CXX    guile/guile.o
  CXX    inf-child.o
  CXX    inf-loop.o
  CXX    infcall.o
  CXX    infcmd.o
  CXX    inferior.o
  CXX    inflow.o
  CXX    infrun.o
  CXX    inline-frame.o
  CXX    interps.o
  CXX    jit.o
  CXX    language.o
  CXX    linespec.o
  CXX    linux-record.o
  CXX    linux-tdep.o
  CXX    location.o
  CXX    m2-exp.o
  CXX    m2-lang.o
  CXX    m2-typeprint.o
  CXX    m2-valprint.o
  CXX    macrocmd.o
  CXX    macroexp.o
  CXX    macroscope.o
  CXX    macrotab.o
  CXX    main.o
  CXX    maint-test-options.o
  CXX    maint-test-settings.o
  CXX    maint.o
  CXX    mdebugread.o
  CXX    mem-break.o
  CXX    memattr.o
  CXX    memory-map.o
  CXX    memrange.o
  CXX    mi/mi-cmd-break.o
  CXX    mi/mi-cmd-catch.o
  CXX    mi/mi-cmd-disas.o
  CXX    mi/mi-cmd-env.o
  CXX    mi/mi-cmd-file.o
  CXX    mi/mi-cmd-info.o
  CXX    mi/mi-cmd-stack.o
  CXX    mi/mi-cmd-target.o
  CXX    mi/mi-cmd-var.o
  CXX    mi/mi-cmds.o
  CXX    mi/mi-common.o
  CXX    mi/mi-console.o
  CXX    mi/mi-getopt.o
  CXX    mi/mi-interp.o
  CXX    mi/mi-main.o
  CXX    mi/mi-out.o
  CXX    mi/mi-parse.o
  CXX    mi/mi-symbol-cmds.o
  CXX    minidebug.o
  CXX    minsyms.o
  CXX    mipsread.o
  CXX    namespace.o
  CXX    objc-lang.o
  CXX    objfiles.o
  CXX    observable.o
  CXX    opencl-lang.o
  CXX    osabi.o
  CXX    osdata.o
  CXX    p-exp.o
  CXX    p-lang.o
  CXX    p-typeprint.o
  CXX    p-valprint.o
  CXX    parse.o
  CXX    posix-hdep.o
  CXX    ppc-linux-tdep.o
  CXX    ppc-ravenscar-thread.o
  CXX    ppc-sysv-tdep.o
  CXX    ppc64-tdep.o
  CXX    printcmd.o
  CXX    probe.o
  CXX    process-stratum-target.o
  CXX    producer.o
  CXX    progspace-and-thread.o
  CXX    progspace.o
  CXX    prologue-value.o
  CXX    psymtab.o
  CXX    python/python.o
  CXX    ravenscar-thread.o
  CXX    record-btrace.o
  CXX    record-full.o
  CXX    record.o
  CXX    regcache-dump.o
  CXX    regcache.o
  CXX    reggroups.o
  CXX    registry.o
  CXX    remote-fileio.o
  CXX    remote-notif.o
  CXX    remote-sim.o
  CXX    remote.o
  CXX    reverse.o
  CXX    rs6000-tdep.o
  CXX    run-on-main-thread.o
  CXX    rust-exp.o
  CXX    rust-lang.o
  CXX    sentinel-frame.o
  CXX    ser-base.o
  CXX    ser-event.o
  CXX    ser-pipe.o
  CXX    ser-tcp.o
  CXX    ser-uds.o
  CXX    ser-unix.o
  CXX    serial.o
  CXX    skip.o
  CXX    solib-svr4.o
  CXX    solib-target.o
  CXX    solib.o
  CXX    source-cache.o
  CXX    source.o
  CXX    stabsread.o
  CXX    stack.o
  CXX    stap-probe.o
  CXX    std-regs.o
  CXX    symfile-debug.o
  CXX    symfile-mem.o
  CXX    symfile.o
  CXX    symmisc.o
  CXX    symtab.o
  CXX    target-connection.o
  CXX    target-dcache.o
  CXX    target-descriptions.o
  CXX    target-float.o
  CXX    target-memory.o
  CXX    target.o
  CXX    target/waitstatus.o
  CXX    test-target.o
  CXX    thread-iter.o
  CXX    thread.o
  CXX    tid-parse.o
  CXX    top.o
  CXX    tracectf.o
  CXX    tracefile-tfile.o
  CXX    tracefile.o
  CXX    tracepoint.o
  CXX    trad-frame.o
  CXX    tramp-frame.o
  CXX    type-stack.o
  CXX    typeprint.o
  CXX    ui-file.o
  CXX    ui-out.o
  CXX    ui-style.o
  CXX    user-regs.o
  CXX    utils.o
  CXX    valarith.o
  CXX    valops.o
  CXX    valprint.o
  CXX    value.o
  CXX    varobj.o
  CXX    version.o
  CXX    xml-builtin.o
  GEN    init.c
  CXX    init.o
  CXXLD  gdb
make[4]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/host-gdb-10.2/build/gdb'
make[5]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/host-gdb-10.2/build/gdb/doc'
(test "ln -s" = "ln -s" && \
  ln -s ../../../gdb/doc/all-cfg.texi gdb-cfg.texi) || \
ln ../../../gdb/doc/all-cfg.texi gdb-cfg.texi || \
cp ../../../gdb/doc/all-cfg.texi gdb-cfg.texi
date=`sed -n -e 's/^.* BFD_VERSION_DATE \(.*\)$/\1/p' ../../../gdb/doc/../../bfd/version.h`; \
sed -e "s/DATE/$date/" < ../../../gdb/doc/../version.in > version.subst
echo "@set GDBVN `sed q version.subst`" > ./GDBvn.new
if [ -n "(GDB) " ]; then \
  echo "@set VERSION_PACKAGE (GDB) " >> ./GDBvn.new; \
fi
echo "@set BUGURL @uref{https://www.gnu.org/software/gdb/bugs/}" >> ./GDBvn.new
if [ "@uref{https://www.gnu.org/software/gdb/bugs/}" = "@uref{http://www.gnu.org/software/gdb/bugs/}" ]; then \
  echo "@set BUGURL_DEFAULT" >> ./GDBvn.new; \
fi
if test -z "-I ../../../gdb/doc/../../readline/readline/doc"; then \
  echo "@set SYSTEM_READLINE" >> ./GDBvn.new; \
fi
if [ -n "" ]; then \
  echo "@set SYSTEM_GDBINIT " >> ./GDBvn.new; \
fi
if [ -n "" ]; then \
  echo "@set SYSTEM_GDBINIT_DIR " >> ./GDBvn.new; \
fi
mv GDBvn.new GDBvn.texi
true --split-size=5000000 --split-size=5000000  -DHAVE_MAKEINFO_CLICK -I ../../../gdb/doc/../../readline/readline/doc -I ../../../gdb/doc/../mi -I ../../../gdb/doc \
	-o gdb.info ../../../gdb/doc/gdb.texinfo
true --split-size=5000000 --split-size=5000000  -DHAVE_MAKEINFO_CLICK -I ../../../gdb/doc -o stabs.info ../../../gdb/doc/stabs.texinfo
true --split-size=5000000 --split-size=5000000  -DHAVE_MAKEINFO_CLICK -I ../../../gdb/doc -o annotate.info ../../../gdb/doc/annotate.texinfo
make[5]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/host-gdb-10.2/build/gdb/doc'
make[5]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/host-gdb-10.2/build/gdb/data-directory'
rm -rf ./syscalls
rm -rf ./python
rm -rf ./guile
rm -rf ./system-gdbinit
mkdir ./syscalls
files='' ; \
if test "x$files" != x ; then \
  for file in $files ; do \
    dir=`echo "$file" | sed 's,/[^/]*$,,'` ; \
    /bin/bash ../../../gdb/data-directory/../../mkinstalldirs ./python/$dir ; \
    /usr/bin/install -c -m 644 ../../../gdb/data-directory/../python/lib/$file ./python/$dir ; \
  done ; \
fi
if test "x" != x ; then \
  files='./gdb.scm gdb/boot.scm gdb/experimental.scm gdb/init.scm gdb/iterator.scm gdb/printing.scm gdb/support.scm gdb/types.scm' ; \
  for file in $files ; do \
    dir=`echo "$file" | sed 's,/[^/]*$,,'` ; \
    /bin/bash ../../../gdb/data-directory/../../mkinstalldirs ./guile/$dir ; \
    /usr/bin/install -c -m 644 ../../../gdb/data-directory/../guile/lib/$file ./guile/$dir ; \
  done ; \
  files='./gdb.go gdb/experimental.go gdb/iterator.go gdb/printing.go gdb/support.go gdb/types.go' ; \
  cd ./guile ; \
  for go in $files ; do \
    source="`echo $go | sed 's/\.go$/.scm/'`" ; \
    echo  compile  -Warity-mismatch -Wformat -Wunused-toplevel -L . -o "$go" "$source" ; \
     compile  -Warity-mismatch -Wformat -Wunused-toplevel -L . -o "$go" "$source" || exit 1 ; \
  done ; \
fi
mkdir ./system-gdbinit
touch stamp-python
touch stamp-guile
files='gdb-syscalls.dtd freebsd.xml netbsd.xml aarch64-linux.xml amd64-linux.xml arm-linux.xml i386-linux.xml mips-n32-linux.xml mips-n64-linux.xml mips-o32-linux.xml ppc-linux.xml ppc64-linux.xml s390-linux.xml s390x-linux.xml sparc-linux.xml sparc64-linux.xml' ; \
for file in $files ; do \
  f=../../../gdb/data-directory/../syscalls/$file ; \
  if test -f $f ; then \
    /usr/bin/install -c -m 644 $f ./syscalls ; \
  fi ; \
done
files='elinos.py wrs-linux.py' ; \
for file in $files ; do \
  f=../../../gdb/data-directory/../system-gdbinit/$file ; \
  if test -f $f ; then \
    /usr/bin/install -c -m 644 $f ./system-gdbinit ; \
  fi ; \
done
touch stamp-system-gdbinit
touch stamp-syscalls
make[5]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/host-gdb-10.2/build/gdb/data-directory'
make[4]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/host-gdb-10.2/build/gdb'
make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/host-gdb-10.2/build/gdb'
make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/host-gdb-10.2/build'
make[1]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/host-gdb-10.2/build'
make: Leaving directory '/home/peko/autobuild/instance-1/buildroot'