ogg123.c:708:51: warning: pointer targets in passing argument 2 of 'buffer_submit_data' differ in signedness [-Wpointer-sign] 708 | if (!buffer_submit_data(audio_buffer, convbuffer, ret)) { | ^~~~~~~~~~ | | | unsigned char * In file included from ogg123.c:40: buffer.h:113:43: note: expected 'char *' but argument is of type 'unsigned char *' 113 | int buffer_submit_data (buf_t *buf, char *data, long nbytes); | ~~~~~~^~~~ CC oggvorbis_format.o CC playlist.o CC status.o CC remote.o remote.c: In function 'remotethread': remote.c:152:5: warning: ignoring return value of 'fgets' declared with attribute 'warn_unused_result' [-Wunused-result] 152 | fgets(buf, MAXBUF, stdin); | ^~~~~~~~~~~~~~~~~~~~~~~~~ CC transport.o CC vorbis_comments.o CC vgfilter.o CCLD ogg123 make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/ogg123' Making all in oggenc make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggenc' Making all in man make[4]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggenc/man' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggenc/man' make[4]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggenc' CC oggenc.o CC audio.o audio.c: In function 'wav_id': audio.c:390:18: warning: variable 'flen' set but not used [-Wunused-but-set-variable] 390 | unsigned int flen; | ^~~~ CC encode.o encode.c: In function 'set_advanced_encoder_options': encode.c:72:7: warning: this 'else' clause does not guard... [-Wmisleading-indentation] 72 | else | ^~~~ encode.c:76:9: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'else' 76 | if(!strcmp(opts[i].arg, "bitrate_average_damping")) { | ^~ CC platform.o CC resample.o CC skeleton.o CCLD oggenc make[4]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggenc' make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggenc' Making all in oggdec make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggdec' CC oggdec.o CCLD oggdec make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggdec' Making all in ogginfo make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/ogginfo' CC ogginfo2.o CC metadata.o CC theora.o CC codec_vorbis.o CC codec_theora.o CC codec_kate.o codec_kate.c: In function 'kate_start': codec_kate.c:259:21: warning: variable 'info' set but not used [-Wunused-but-set-variable] 259 | misc_kate_info *info; | ^~~~ CC codec_opus.o CC codec_speex.o CC codec_flac.o CC codec_skeleton.o codec_skeleton.c: In function 'skeleton_process_fisbone_message_header': codec_skeleton.c:119:9: warning: implicit declaration of function 'utf8_decode' [-Wimplicit-function-declaration] 119 | if (utf8_decode(header, &decoded) < 0) { | ^~~~~~~~~~~ codec_skeleton.c: In function 'skeleton_end': codec_skeleton.c:254:25: warning: unused variable 'self' [-Wunused-variable] 254 | misc_skeleton_info *self = stream->data; | ^~~~ CC codec_other.o CC codec_invalid.o CCLD ogginfo make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/ogginfo' Making all in vcut make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/vcut' CC vcut.o CCLD vcut make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/vcut' Making all in vorbiscomment make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/vorbiscomment' CC vcedit.o CC vcomment.o CCLD vorbiscomment make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/vorbiscomment' make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2' make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2' make[2]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2' make[1]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2' >>> vorbis-tools 1.4.2 Installing to target PATH="/home/autobuild/autobuild/instance-12/output-1/host/bin:/home/autobuild/autobuild/instance-12/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" /usr/bin/make -j1 DESTDIR=/home/autobuild/autobuild/instance-12/output-1/target install -C /home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/ make[1]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2' Making install in po make[2]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/po' if test "vorbis-tools" = "gettext-tools"; then \ /usr/bin/mkdir -p /home/autobuild/autobuild/instance-12/output-1/target/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /home/autobuild/autobuild/instance-12/output-1/target/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /home/autobuild/autobuild/instance-12/output-1/target/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/po' Making install in intl make[2]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/intl' if { test "vorbis-tools" = "gettext-runtime" || test "vorbis-tools" = "gettext-tools"; } \ && test 'no' = yes; then \ /usr/bin/mkdir -p /home/autobuild/autobuild/instance-12/output-1/target/usr/lib /home/autobuild/autobuild/instance-12/output-1/target/usr/include; \ /usr/bin/install -c -m 644 libintl.h /home/autobuild/autobuild/instance-12/output-1/target/usr/include/libintl.h; \ /bin/sh ../libtool --mode=install \ /usr/bin/install -c -m 644 libintl.a /home/autobuild/autobuild/instance-12/output-1/target/usr/lib/libintl.a; \ if test "@RELOCATABLE@" = yes; then \ dependencies=`sed -n -e 's,^dependency_libs=\(.*\),\1,p' < /home/autobuild/autobuild/instance-12/output-1/target/usr/lib/libintl.la | sed -e "s,^',," -e "s,'\$,,"`; \ if test -n "$dependencies"; then \ rm -f /home/autobuild/autobuild/instance-12/output-1/target/usr/lib/libintl.la; \ fi; \ fi; \ else \ : ; \ fi if test "vorbis-tools" = "gettext-tools" \ && test 'no' = no \ && test yes != no; then \ /usr/bin/mkdir -p /home/autobuild/autobuild/instance-12/output-1/target/usr/lib; \ /bin/sh ../libtool --mode=install \ /usr/bin/install -c -m 644 libgnuintl.a /home/autobuild/autobuild/instance-12/output-1/target/usr/lib/libgnuintl.a; \ rm -f /home/autobuild/autobuild/instance-12/output-1/target/usr/lib/preloadable_libintl.so; \ /usr/bin/install -c -m 644 /home/autobuild/autobuild/instance-12/output-1/target/usr/lib/libgnuintl.so /home/autobuild/autobuild/instance-12/output-1/target/usr/lib/preloadable_libintl.so; \ /bin/sh ../libtool --mode=uninstall \ rm -f /home/autobuild/autobuild/instance-12/output-1/target/usr/lib/libgnuintl.a; \ else \ : ; \ fi if test 'no' = yes; then \ test yes != no || /usr/bin/mkdir -p /home/autobuild/autobuild/instance-12/output-1/target/usr/lib; \ temp=/home/autobuild/autobuild/instance-12/output-1/target/usr/lib/t-charset.alias; \ dest=/home/autobuild/autobuild/instance-12/output-1/target/usr/lib/charset.alias; \ if test -f /home/autobuild/autobuild/instance-12/output-1/target/usr/lib/charset.alias; then \ orig=/home/autobuild/autobuild/instance-12/output-1/target/usr/lib/charset.alias; \ sed -f ref-add.sed $orig > $temp; \ /usr/bin/install -c -m 644 $temp $dest; \ rm -f $temp; \ else \ if test yes = no; then \ orig=charset.alias; \ sed -f ref-add.sed $orig > $temp; \ /usr/bin/install -c -m 644 $temp $dest; \ rm -f $temp; \ fi; \ fi; \ /usr/bin/mkdir -p /home/autobuild/autobuild/instance-12/output-1/target/usr/share/locale; \ test -f /home/autobuild/autobuild/instance-12/output-1/target/usr/share/locale/locale.alias \ && orig=/home/autobuild/autobuild/instance-12/output-1/target/usr/share/locale/locale.alias \ || orig=./locale.alias; \ temp=/home/autobuild/autobuild/instance-12/output-1/target/usr/share/locale/t-locale.alias; \ dest=/home/autobuild/autobuild/instance-12/output-1/target/usr/share/locale/locale.alias; \ sed -f ref-add.sed $orig > $temp; \ /usr/bin/install -c -m 644 $temp $dest; \ rm -f $temp; \ else \ : ; \ fi if test "vorbis-tools" = "gettext-tools"; then \ /usr/bin/mkdir -p /home/autobuild/autobuild/instance-12/output-1/target/usr/share/gettext/intl; \ /usr/bin/install -c -m 644 VERSION /home/autobuild/autobuild/instance-12/output-1/target/usr/share/gettext/intl/VERSION; \ /usr/bin/install -c -m 644 ChangeLog.inst /home/autobuild/autobuild/instance-12/output-1/target/usr/share/gettext/intl/ChangeLog; \ dists="COPYING.LIB-2.0 COPYING.LIB-2.1 Makefile.in config.charset locale.alias ref-add.sin ref-del.sin export.h libintl.rc gmo.h gettextP.h hash-string.h loadinfo.h plural-exp.h eval-plural.h localcharset.h lock.h relocatable.h tsearch.h tsearch.c xsize.h printf-args.h printf-args.c printf-parse.h wprintf-parse.h printf-parse.c vasnprintf.h vasnwprintf.h vasnprintf.c os2compat.h libgnuintl.h.in bindtextdom.c dcgettext.c dgettext.c gettext.c finddomain.c hash-string.c loadmsgcat.c localealias.c textdomain.c l10nflist.c explodename.c dcigettext.c dcngettext.c dngettext.c ngettext.c plural.y plural-exp.c localcharset.c lock.c relocatable.c langprefs.c localename.c log.c printf.c version.c osdep.c os2compat.c intl-exports.c intl-compat.c"; \ for file in $dists; do \ /usr/bin/install -c -m 644 ./$file \ /home/autobuild/autobuild/instance-12/output-1/target/usr/share/gettext/intl/$file; \ done; \ chmod a+x /home/autobuild/autobuild/instance-12/output-1/target/usr/share/gettext/intl/config.charset; \ dists="plural.c"; \ for file in $dists; do \ if test -f $file; then dir=.; else dir=.; fi; \ /usr/bin/install -c -m 644 $dir/$file \ /home/autobuild/autobuild/instance-12/output-1/target/usr/share/gettext/intl/$file; \ done; \ dists="xopen-msg.sed linux-msg.sed po2tbl.sed.in cat-compat.c COPYING.LIB-2 gettext.h libgettext.h plural-eval.c libgnuintl.h libgnuintl.h_vms Makefile.vms libgnuintl.h.msvc-static libgnuintl.h.msvc-shared Makefile.msvc"; \ for file in $dists; do \ rm -f /home/autobuild/autobuild/instance-12/output-1/target/usr/share/gettext/intl/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/intl' Making install in include make[2]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/include' make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/include' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/include' make[2]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/include' Making install in share make[2]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/share' make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/share' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/share' make[2]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/share' Making install in win32 make[2]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/win32' make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/win32' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/win32' make[2]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/win32' Making install in ogg123 make[2]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/ogg123' make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/ogg123' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-12/output-1/target/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c ogg123 '/home/autobuild/autobuild/instance-12/output-1/target/usr/bin' libtool: install: /usr/bin/install -c ogg123 /home/autobuild/autobuild/instance-12/output-1/target/usr/bin/ogg123 /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-12/output-1/target/usr/share/doc/vorbis-tools-1.4.2' /usr/bin/install -c -m 644 ogg123rc-example '/home/autobuild/autobuild/instance-12/output-1/target/usr/share/doc/vorbis-tools-1.4.2' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-12/output-1/target/usr/share/man/man1' /usr/bin/install -c -m 644 ogg123.1 '/home/autobuild/autobuild/instance-12/output-1/target/usr/share/man/man1' make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/ogg123' make[2]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/ogg123' Making install in oggenc make[2]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggenc' Making install in man make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggenc/man' make[4]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggenc/man' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-12/output-1/target/usr/share/man/man1' /usr/bin/install -c -m 644 oggenc.1 '/home/autobuild/autobuild/instance-12/output-1/target/usr/share/man/man1' make[4]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggenc/man' make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggenc/man' make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggenc' make[4]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggenc' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-12/output-1/target/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c oggenc '/home/autobuild/autobuild/instance-12/output-1/target/usr/bin' libtool: install: /usr/bin/install -c oggenc /home/autobuild/autobuild/instance-12/output-1/target/usr/bin/oggenc make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggenc' make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggenc' make[2]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggenc' Making install in oggdec make[2]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggdec' make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggdec' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-12/output-1/target/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c oggdec '/home/autobuild/autobuild/instance-12/output-1/target/usr/bin' libtool: install: /usr/bin/install -c oggdec /home/autobuild/autobuild/instance-12/output-1/target/usr/bin/oggdec /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-12/output-1/target/usr/share/man/man1' /usr/bin/install -c -m 644 oggdec.1 '/home/autobuild/autobuild/instance-12/output-1/target/usr/share/man/man1' make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggdec' make[2]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/oggdec' Making install in ogginfo make[2]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/ogginfo' make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/ogginfo' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-12/output-1/target/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c ogginfo '/home/autobuild/autobuild/instance-12/output-1/target/usr/bin' libtool: install: /usr/bin/install -c ogginfo /home/autobuild/autobuild/instance-12/output-1/target/usr/bin/ogginfo /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-12/output-1/target/usr/share/man/man1' /usr/bin/install -c -m 644 ogginfo.1 '/home/autobuild/autobuild/instance-12/output-1/target/usr/share/man/man1' make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/ogginfo' make[2]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/ogginfo' Making install in vcut make[2]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/vcut' make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/vcut' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-12/output-1/target/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c vcut '/home/autobuild/autobuild/instance-12/output-1/target/usr/bin' libtool: install: /usr/bin/install -c vcut /home/autobuild/autobuild/instance-12/output-1/target/usr/bin/vcut /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-12/output-1/target/usr/share/man/man1' /usr/bin/install -c -m 644 vcut.1 '/home/autobuild/autobuild/instance-12/output-1/target/usr/share/man/man1' make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/vcut' make[2]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/vcut' Making install in vorbiscomment make[2]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/vorbiscomment' make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/vorbiscomment' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-12/output-1/target/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c vorbiscomment '/home/autobuild/autobuild/instance-12/output-1/target/usr/bin' libtool: install: /usr/bin/install -c vorbiscomment /home/autobuild/autobuild/instance-12/output-1/target/usr/bin/vorbiscomment /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-12/output-1/target/usr/share/man/man1' /usr/bin/install -c -m 644 vorbiscomment.1 '/home/autobuild/autobuild/instance-12/output-1/target/usr/share/man/man1' make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/vorbiscomment' make[2]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2/vorbiscomment' make[2]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2' make[3]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2' make[2]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2' make[1]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/vorbis-tools-1.4.2' wpa_supplicant-2.10.tar.gz: OK (sha256: 20df7ae5154b3830355f8ab4269123a87affdea59fe74fe9292a91d0d7e17b2f) >>> wpa_supplicant 2.10 Extracting gzip -d -c /home/autobuild/autobuild/instance-12/dl/wpa_supplicant/wpa_supplicant-2.10.tar.gz | tar --strip-components=1 -C /home/autobuild/autobuild/instance-12/output-1/build/wpa_supplicant-2.10 -xf - >>> wpa_supplicant 2.10 Patching Applying 0001-build-re-enable-options-for-libwpa_client.so-and-.patch using patch: patching file wpa_supplicant/Makefile >>> wpa_supplicant 2.10 Configuring cp /home/autobuild/autobuild/instance-12/output-1/build/wpa_supplicant-2.10/wpa_supplicant/defconfig /home/autobuild/autobuild/instance-12/output-1/build/wpa_supplicant-2.10/wpa_supplicant/.config sed -i -e 's/^#\(CONFIG_INTERNAL_LIBTOMMATH\)/\1/' -e 's/^#\(CONFIG_MATCH_IFACE\)/\1/' -e 's/^#\(CONFIG_LIBNL32\)/\1/' -e 's/^#\(CONFIG_AUTOSCAN_EXPONENTIAL\)/\1/' -e 's/^#\(CONFIG_AUTOSCAN_PERIODIC\)/\1/' -e 's/^#\(CONFIG_READLINE\)/\1/' -e 's/^\(CONFIG_SMARTCARD\)/#\1/' -e 's/^\(CONFIG_DRIVER_WEXT\)/#\1/' -e 's/^\(CONFIG_IBSS_RSN\)/#\1/' -e 's/^\(CONFIG_EAP\)/#\1/' -e 's/^\(CONFIG_IEEE8021X_EAPOL\)/#\1/' -e 's/^\(CONFIG_FILS\)/#\1/' -e 's/^\(CONFIG_DRIVER_WIRED\)/#\1/' -e 's/^\(CONFIG_MACSEC\)/#\1/' -e 's/^\(CONFIG_DRIVER_MACSEC\)/#\1/' -e 's/^\(CONFIG_HS20\)/#\1/' -e 's/^\(CONFIG_INTERWORKING\)/#\1/' -e 's/^\(CONFIG_AP\)/#\1/' -e 's/^\(CONFIG_P2P\)/#\1/' -e 's/^\(CONFIG_WIFI_DISPLAY\)/#\1/' -e 's/^\(CONFIG_MESH\)/#\1/' -e 's/^\(CONFIG_WPS\)/#\1/' -e 's/^\(CONFIG_DPP\)/#\1/' -e 's/^\(CONFIG_SAE\)/#\1/' -e 's/^\(CONFIG_OWE\)/#\1/' -e 's/^\(CONFIG_CTRL_IFACE\>\)/#\1/' -e 's/^\(CONFIG_CTRL_IFACE_DBUS_NEW\)/#\1/' -e 's/^\(CONFIG_DEBUG_SYSLOG\)/#\1/' -e 's/#\(CONFIG_TLS=openssl\)/\1/' /home/autobuild/autobuild/instance-12/output-1/build/wpa_supplicant-2.10/wpa_supplicant/.config # set requested configuration options not listed in wpa_s defconfig for s in CONFIG_INTERNAL_LIBTOMMATH CONFIG_MATCH_IFACE CONFIG_LIBNL32 CONFIG_AUTOSCAN_EXPONENTIAL CONFIG_AUTOSCAN_PERIODIC CONFIG_READLINE ; do if ! grep -q "^${s}" /home/autobuild/autobuild/instance-12/output-1/build/wpa_supplicant-2.10/wpa_supplicant/.config; then echo "${s}=y" >> /home/autobuild/autobuild/instance-12/output-1/build/wpa_supplicant-2.10/wpa_supplicant/.config ; fi done >>> wpa_supplicant 2.10 Building PATH="/home/autobuild/autobuild/instance-12/output-1/host/bin:/home/autobuild/autobuild/instance-12/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O1 -g0 -D_FORTIFY_SOURCE=1 -I/home/autobuild/autobuild/instance-12/output-1/host/powerpc64-buildroot-linux-gnu/sysroot/usr/include/libnl3/" LDFLAGS="" BINDIR=/usr/sbin LIBS="`/home/autobuild/autobuild/instance-12/output-1/host/bin/pkg-config --libs openssl`" LIBS_c="`/home/autobuild/autobuild/instance-12/output-1/host/bin/pkg-config --libs openssl`" LIBS_p="`/home/autobuild/autobuild/instance-12/output-1/host/bin/pkg-config --libs openssl`" /usr/bin/make -j1 CC="/home/autobuild/autobuild/instance-12/output-1/host/bin/powerpc64-buildroot-linux-gnu-gcc" -C /home/autobuild/autobuild/instance-12/output-1/build/wpa_supplicant-2.10/wpa_supplicant make[1]: Entering directory '/home/autobuild/autobuild/instance-12/output-1/build/wpa_supplicant-2.10/wpa_supplicant' CC config.c CC notify.c CC bss.c CC eap_register.c CC ../src/utils/common.c CC ../src/utils/config.c CC ../src/utils/wpa_debug.c CC ../src/utils/wpabuf.c CC ../src/utils/bitfield.c CC ../src/utils/ip_addr.c CC ../src/utils/crc32.c CC op_classes.c CC rrm.c CC twt.c CC robust_av.c CC wmm_ac.c CC ../src/utils/os_unix.c CC ../src/utils/eloop.c CC config_file.c CC ../src/rsn_supp/wpa_ft.c CC ../src/rsn_supp/tdls.c CC ../src/rsn_supp/wpa.c CC ../src/rsn_supp/preauth.c CC ../src/rsn_supp/pmksa_cache.c CC ../src/rsn_supp/wpa_ie.c CC ../src/common/wpa_common.c CC ../src/crypto/crypto_openssl.c CC ../src/crypto/tls_none.c CC ../src/crypto/aes-omac1.c CC ../src/crypto/sha256-prf.c CC ../src/crypto/sha256-tlsprf.c CC ../src/crypto/random.c CC ../src/utils/base64.c CC sme.c CC ../src/common/ieee802_11_common.c CC ../src/common/hw_features_common.c CC ../src/crypto/sha1-prf.c CC bgscan_simple.c CC bgscan.c CC autoscan_exponential.c CC autoscan_periodic.c CC autoscan.c CC ../src/drivers/driver_common.c CC wpa_supplicant.c CC events.c CC bssid_ignore.c CC wpas_glue.c CC scan.c CC main.c CC ../src/drivers/driver_nl80211.c CC ../src/drivers/driver_nl80211_capa.c CC ../src/drivers/driver_nl80211_event.c CC ../src/drivers/driver_nl80211_monitor.c CC ../src/drivers/driver_nl80211_scan.c CC ../src/drivers/netlink.c CC ../src/drivers/rfkill.c CC ../src/utils/radiotap.c CC ../src/drivers/linux_ioctl.c CC ../src/drivers/drivers.c CC ../src/l2_packet/l2_packet_linux.c LD wpa_supplicant CC wpa_cli.c CC ../src/common/wpa_ctrl.c CC ../src/common/cli.c CC ../src/utils/edit_readline.c LD wpa_cli sed systemd/wpa_supplicant.service.in sed systemd/wpa_supplicant.service.arg.in sed systemd/wpa_supplicant-nl80211.service.arg.in sed systemd/wpa_supplicant-wired.service.arg.in sed dbus/fi.w1.wpa_supplicant1.service.in CC wpa_passphrase.c LD wpa_passphrase make[1]: Leaving directory '/home/autobuild/autobuild/instance-12/output-1/build/wpa_supplicant-2.10/wpa_supplicant' >>> wpa_supplicant 2.10 Installing to staging directory >>> wpa_supplicant 2.10 Fixing libtool files for la in $(find /home/autobuild/autobuild/instance-12/output-1/host/powerpc64-buildroot-linux-gnu/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /usr/bin/sed -i -e "s:/home/autobuild/autobuild/instance-12/output-1:@BASE_DIR@:g" \ -e "s:/home/autobuild/autobuild/instance-12/output-1/host/powerpc64-buildroot-linux-gnu/sysroot:@STAGING_DIR@:g" \ \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ \ -e "s:@STAGING_DIR@:/home/autobuild/autobuild/instance-12/output-1/host/powerpc64-buildroot-linux-gnu/sysroot:g" \ -e "s:@BASE_DIR@:/home/autobuild/autobuild/instance-12/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> wpa_supplicant 2.10 Installing to target /usr/bin/install -m 0755 -D /home/autobuild/autobuild/instance-12/output-1/build/wpa_supplicant-2.10/wpa_supplicant/wpa_supplicant /home/autobuild/autobuild/instance-12/output-1/target/usr/sbin/wpa_supplicant /usr/bin/install -m 644 -D package/wpa_supplicant/wpa_supplicant.conf /home/autobuild/autobuild/instance-12/output-1/target/etc/wpa_supplicant.conf >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/autobuild/autobuild/instance-12/output-1/host/etc/meson sed -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O1', '-g0', '-D_FORTIFY_SOURCE=1'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_LDFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O1', '-g0', '-D_FORTIFY_SOURCE=1'@PKG_TARGET_CXXFLAGS@%g" -e "s%@TARGET_CC@%/home/autobuild/autobuild/instance-12/output-1/host/bin/powerpc64-buildroot-linux-gnu-gcc%g" -e "s%@TARGET_CXX@%/home/autobuild/autobuild/instance-12/output-1/host/bin/powerpc64-buildroot-linux-gnu-g++%g" -e "s%@TARGET_AR@%/home/autobuild/autobuild/instance-12/output-1/host/bin/powerpc64-buildroot-linux-gnu-gcc-ar%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%ppc64%g" -e "s%@TARGET_CPU@%e5500%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_CFLAGS@%%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%%g" -e "s%@BR2_CMAKE@%/usr/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/autobuild/autobuild/instance-12/output-1/host/bin/pkgconf%g" -e "s%@STAGING_DIR@%/home/autobuild/autobuild/instance-12/output-1/host/powerpc64-buildroot-linux-gnu/sysroot%g" -e "s%@STATIC@%false%g" /home/autobuild/autobuild/instance-12/buildroot/support/misc/cross-compilation.conf.in > /home/autobuild/autobuild/instance-12/output-1/host/etc/meson/cross-compilation.conf.in sed -e "s%@TARGET_CC@%/home/autobuild/autobuild/instance-12/output-1/host/bin/powerpc64-buildroot-linux-gnu-gcc%g" -e "s%@TARGET_CXX@%/home/autobuild/autobuild/instance-12/output-1/host/bin/powerpc64-buildroot-linux-gnu-g++%g" -e "s%@TARGET_AR@%/home/autobuild/autobuild/instance-12/output-1/host/bin/powerpc64-buildroot-linux-gnu-gcc-ar%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%ppc64%g" -e "s%@TARGET_CPU@%e5500%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O1', '-g0', '-D_FORTIFY_SOURCE=1'%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O1', '-g0', '-D_FORTIFY_SOURCE=1'%g" -e "s%@BR2_CMAKE@%/usr/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/autobuild/autobuild/instance-12/output-1/host/bin/pkgconf%g" -e "s%@STAGING_DIR@%/home/autobuild/autobuild/instance-12/output-1/host/powerpc64-buildroot-linux-gnu/sysroot%g" -e "s%@STATIC@%false%g" /home/autobuild/autobuild/instance-12/buildroot/support/misc/cross-compilation.conf.in > /home/autobuild/autobuild/instance-12/output-1/host/etc/meson/cross-compilation.conf /usr/bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 #~' /home/autobuild/autobuild/instance-12/output-1/target/etc/inittab /usr/bin/sed -i -e '/^[^#].*-o remount,rw \/$/s~^~#~' /home/autobuild/autobuild/instance-12/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /home/autobuild/autobuild/instance-12/output-1/build/busybox-1.35.0/.config; then grep -qsE '^/bin/ash$' /home/autobuild/autobuild/instance-12/output-1/target/etc/shells || echo "/bin/ash" >> /home/autobuild/autobuild/instance-12/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/autobuild/autobuild/instance-12/output-1/build/busybox-1.35.0/.config; then grep -qsE '^/bin/hush$' /home/autobuild/autobuild/instance-12/output-1/target/etc/shells || echo "/bin/hush" >> /home/autobuild/autobuild/instance-12/output-1/target/etc/shells; fi mkdir -p /home/autobuild/autobuild/instance-12/output-1/target/etc echo "buildroot" > /home/autobuild/autobuild/instance-12/output-1/target/etc/hostname /usr/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/autobuild/autobuild/instance-12/output-1/target/etc/hosts mkdir -p /home/autobuild/autobuild/instance-12/output-1/target/etc echo "Welcome to Buildroot" > /home/autobuild/autobuild/instance-12/output-1/target/etc/issue /usr/bin/sed -i -e s,^root:[^:]*:,root:"*":, /home/autobuild/autobuild/instance-12/output-1/target/etc/shadow grep -qsE '^/bin/sh$' /home/autobuild/autobuild/instance-12/output-1/target/etc/shells || echo "/bin/sh" >> /home/autobuild/autobuild/instance-12/output-1/target/etc/shells if [ -x /home/autobuild/autobuild/instance-12/output-1/target/sbin/swapon -a -x /home/autobuild/autobuild/instance-12/output-1/target/sbin/swapoff ]; then /usr/bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/autobuild/autobuild/instance-12/output-1/target/etc/inittab; else /usr/bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/autobuild/autobuild/instance-12/output-1/target/etc/inittab; fi if test -d /home/autobuild/autobuild/instance-12/output-1/target/lib/modules/`MAKEFLAGS='' /usr/bin/make -j1 HOSTCC="/usr/bin/gcc -O2 -I/home/autobuild/autobuild/instance-12/output-1/host/include -L/home/autobuild/autobuild/instance-12/output-1/host/lib -Wl,-rpath,/home/autobuild/autobuild/instance-12/output-1/host/lib" ARCH=powerpc INSTALL_MOD_PATH=/home/autobuild/autobuild/instance-12/output-1/target CROSS_COMPILE="/home/autobuild/autobuild/instance-12/output-1/host/bin/powerpc64-buildroot-linux-gnu-" DEPMOD=/home/autobuild/autobuild/instance-12/output-1/host/sbin/depmod -C /home/autobuild/autobuild/instance-12/output-1/build/linux-5.15.30 --no-print-directory -s kernelrelease 2>/dev/null` && grep -q "CONFIG_MODULES=y" /home/autobuild/autobuild/instance-12/output-1/build/linux-5.15.30/.config; then /home/autobuild/autobuild/instance-12/output-1/host/sbin/depmod -a -b /home/autobuild/autobuild/instance-12/output-1/target `MAKEFLAGS='' /usr/bin/make -j1 HOSTCC="/usr/bin/gcc -O2 -I/home/autobuild/autobuild/instance-12/output-1/host/include -L/home/autobuild/autobuild/instance-12/output-1/host/lib -Wl,-rpath,/home/autobuild/autobuild/instance-12/output-1/host/lib" ARCH=powerpc INSTALL_MOD_PATH=/home/autobuild/autobuild/instance-12/output-1/target CROSS_COMPILE="/home/autobuild/autobuild/instance-12/output-1/host/bin/powerpc64-buildroot-linux-gnu-" DEPMOD=/home/autobuild/autobuild/instance-12/output-1/host/sbin/depmod -C /home/autobuild/autobuild/instance-12/output-1/build/linux-5.15.30 --no-print-directory -s kernelrelease 2>/dev/null`; fi rm -rf /home/autobuild/autobuild/instance-12/output-1/target/usr/include /home/autobuild/autobuild/instance-12/output-1/target/usr/share/aclocal \ /home/autobuild/autobuild/instance-12/output-1/target/usr/lib/pkgconfig /home/autobuild/autobuild/instance-12/output-1/target/usr/share/pkgconfig \ /home/autobuild/autobuild/instance-12/output-1/target/usr/lib/cmake /home/autobuild/autobuild/instance-12/output-1/target/usr/share/cmake \ /home/autobuild/autobuild/instance-12/output-1/target/usr/doc find /home/autobuild/autobuild/instance-12/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/autobuild/autobuild/instance-12/output-1/target/lib/ /home/autobuild/autobuild/instance-12/output-1/target/usr/lib/ /home/autobuild/autobuild/instance-12/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f rm -rf /home/autobuild/autobuild/instance-12/output-1/target/usr/share/gdb rm -rf /home/autobuild/autobuild/instance-12/output-1/target/usr/share/bash-completion rm -rf /home/autobuild/autobuild/instance-12/output-1/target/etc/bash_completion.d rm -rf /home/autobuild/autobuild/instance-12/output-1/target/usr/share/zsh rm -rf /home/autobuild/autobuild/instance-12/output-1/target/usr/man /home/autobuild/autobuild/instance-12/output-1/target/usr/share/man rm -rf /home/autobuild/autobuild/instance-12/output-1/target/usr/info /home/autobuild/autobuild/instance-12/output-1/target/usr/share/info rm -rf /home/autobuild/autobuild/instance-12/output-1/target/usr/doc /home/autobuild/autobuild/instance-12/output-1/target/usr/share/doc rm -rf /home/autobuild/autobuild/instance-12/output-1/target/usr/share/gtk-doc rmdir /home/autobuild/autobuild/instance-12/output-1/target/usr/share 2>/dev/null || true rm -rf /home/autobuild/autobuild/instance-12/output-1/target/lib/debug /home/autobuild/autobuild/instance-12/output-1/target/usr/lib/debug find /home/autobuild/autobuild/instance-12/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /bin/true 2>/dev/null || true find /home/autobuild/autobuild/instance-12/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /bin/true 2>/dev/null || true test -f /home/autobuild/autobuild/instance-12/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/autobuild/autobuild/instance-12/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/autobuild/autobuild/instance-12/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2022.02-441-g8f3cfe4196"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2022.05-git"; \ echo "PRETTY_NAME=\"Buildroot 2022.05-git\"" \ ) > /home/autobuild/autobuild/instance-12/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/autobuild/autobuild/instance-12/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/autobuild/autobuild/instance-12/output-1/per-package /home/autobuild/autobuild/instance-12/buildroot/support/scripts/fix-rpath target touch /home/autobuild/autobuild/instance-12/output-1/target/usr >>> Generating root filesystems common tables rm -rf /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs mkdir -p /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs printf ' \n' >> /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/full_users_table.txt printf ' /bin/busybox f 4755 0 0 - - - - -\n\n' > /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/full_devices_table.txt cat system/device_table.txt >> /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/full_devices_table.txt >>> Generating filesystem image rootfs.ext2 mkdir -p /home/autobuild/autobuild/instance-12/output-1/images rm -rf /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2 mkdir -p /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2 rsync -auH --exclude=/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM /home/autobuild/autobuild/instance-12/output-1/target/ /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/target echo '#!/bin/sh' > /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/fakeroot echo "set -e" >> /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/fakeroot echo "chown -h -R 0:0 /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/target" >> /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/fakeroot PATH="/home/autobuild/autobuild/instance-12/output-1/host/bin:/home/autobuild/autobuild/instance-12/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" /home/autobuild/autobuild/instance-12/buildroot/support/scripts/mkusers /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/full_users_table.txt /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/target >> /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/fakeroot echo "/home/autobuild/autobuild/instance-12/output-1/host/bin/makedevs -d /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/full_devices_table.txt /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/target" >> /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/fakeroot echo "find /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/target/run/ -mindepth 1 -prune -print0 | xargs -0r rm -rf --" >> /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/fakeroot echo "find /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/target/tmp/ -mindepth 1 -prune -print0 | xargs -0r rm -rf --" >> /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/fakeroot printf ' \n' >> /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/fakeroot printf ' \n' >> /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/fakeroot printf ' rm -f /home/autobuild/autobuild/instance-12/output-1/images/rootfs.ext2\n /home/autobuild/autobuild/instance-12/output-1/host/sbin/mkfs.ext2 -d /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/target -r 0 -N 0 -m 5 -L "rootfs" -O ^64bit /home/autobuild/autobuild/instance-12/output-1/images/rootfs.ext2 "60M" || { ret=$?; echo "*** Maybe you need to increase the filesystem size (BR2_TARGET_ROOTFS_EXT2_SIZE)" 1>&2; exit $ret; }\n' >> /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/fakeroot chmod a+x /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/fakeroot PATH="/home/autobuild/autobuild/instance-12/output-1/host/bin:/home/autobuild/autobuild/instance-12/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" FAKEROOTDONTTRYCHOWN=1 /home/autobuild/autobuild/instance-12/output-1/host/bin/fakeroot -- /home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/fakeroot rootdir=/home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/ext2/target table='/home/autobuild/autobuild/instance-12/output-1/build/buildroot-fs/full_devices_table.txt' mke2fs 1.46.5 (30-Dec-2021) Creating regular file /home/autobuild/autobuild/instance-12/output-1/images/rootfs.ext2 Creating filesystem with 61440 1k blocks and 15360 inodes Filesystem UUID: 5ce8125d-0b70-486f-9f04-f1f0eb849552 Superblock backups stored on blocks: 8193, 16385, 24577, 32769, 40961, 49153, 57345 Allocating group tables: 0/8 done Writing inode tables: 0/8 done Copying files into the device: __populate_fs: Could not allocate block in ext2 filesystem while writing file "es2ts" mkfs.ext2: Could not allocate block in ext2 filesystem while populating file system *** Maybe you need to increase the filesystem size (BR2_TARGET_ROOTFS_EXT2_SIZE) make: *** [fs/ext2/ext2.mk:65: /home/autobuild/autobuild/instance-12/output-1/images/rootfs.ext2] Error 1 make: Leaving directory '/home/autobuild/autobuild/instance-12/buildroot'