make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/src' Making install in doc make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/doc' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/nds32le-buildroot-linux-gnu/sysroot/usr/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_elem_status.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 '/home/buildroot/autobuild/instance-0/output-1/host/nds32le-buildroot-linux-gnu/sysroot/usr/share/man/man8' /usr/bin/install -c -m 644 sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/buildroot/autobuild/instance-0/output-1/host/nds32le-buildroot-linux-gnu/sysroot/usr/share/man/man8' make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/doc' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/doc' Making install in scripts make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/scripts' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/host/nds32le-buildroot-linux-gnu/sysroot/usr/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/buildroot/autobuild/instance-0/output-1/host/nds32le-buildroot-linux-gnu/sysroot/usr/bin' make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/scripts' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/scripts' make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45' make[1]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45' >>> sg3_utils 1.45 Fixing libtool files for la in $(find /home/buildroot/autobuild/instance-0/output-1/host/nds32le-buildroot-linux-gnu/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/autobuild/instance-0/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-0/output-1/host/nds32le-buildroot-linux-gnu/sysroot:@STAGING_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/buildroot/autobuild/instance-0/output-1/host/nds32le-buildroot-linux-gnu/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/autobuild/instance-0/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> sg3_utils 1.45 Installing to target PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-0/output-1/target install -C /home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/ make[1]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45' Making install in include make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/include' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/include' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/include/scsi' /usr/bin/install -c -m 644 sg_lib.h sg_lib_data.h sg_cmds.h sg_cmds_basic.h sg_cmds_extra.h sg_cmds_mmc.h sg_pr2serr.h sg_unaligned.h sg_pt.h sg_pt_nvme.h sg_linux_inc.h sg_io_linux.h sg_pt_linux.h '/home/buildroot/autobuild/instance-0/output-1/target/usr/include/scsi' make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/include' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/include' Making install in lib make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/lib' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/lib' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib' /bin/bash ../libtool --mode=install /usr/bin/install -c libsgutils2.la '/home/buildroot/autobuild/instance-0/output-1/target/usr/lib' libtool: install: /usr/bin/install -c .libs/libsgutils2-1.45.so.2.0.0 /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/libsgutils2-1.45.so.2.0.0 libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/target/usr/lib && { ln -s -f libsgutils2-1.45.so.2.0.0 libsgutils2-1.45.so.2 || { rm -f libsgutils2-1.45.so.2 && ln -s libsgutils2-1.45.so.2.0.0 libsgutils2-1.45.so.2; }; }) libtool: install: (cd /home/buildroot/autobuild/instance-0/output-1/target/usr/lib && { ln -s -f libsgutils2-1.45.so.2.0.0 libsgutils2.so || { rm -f libsgutils2.so && ln -s libsgutils2-1.45.so.2.0.0 libsgutils2.so; }; }) libtool: install: /usr/bin/install -c .libs/libsgutils2.lai /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/libsgutils2.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/lib' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/lib' Making install in src make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/src' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/src' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c sg_bg_ctl sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_elem_status sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_seek sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_stream_ctl sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_write_x sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/home/buildroot/autobuild/instance-0/output-1/target/usr/bin' libtool: install: /usr/bin/install -c sg_bg_ctl /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_bg_ctl libtool: install: /usr/bin/install -c sg_compare_and_write /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_compare_and_write libtool: install: /usr/bin/install -c sg_decode_sense /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_decode_sense libtool: install: /usr/bin/install -c sg_format /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_format libtool: install: /usr/bin/install -c sg_get_config /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_get_config libtool: install: /usr/bin/install -c sg_get_elem_status /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_get_elem_status libtool: install: /usr/bin/install -c sg_get_lba_status /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_get_lba_status libtool: install: /usr/bin/install -c sg_ident /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_ident libtool: install: /usr/bin/install -c sg_inq /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_inq libtool: install: /usr/bin/install -c sg_logs /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_logs libtool: install: /usr/bin/install -c sg_luns /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_luns libtool: install: /usr/bin/install -c sg_modes /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rep_zones /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_identify /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_seek /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_seek libtool: install: /usr/bin/install -c sg_senddiag /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_stpg libtool: install: /usr/bin/install -c sg_stream_ctl /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_stream_ctl libtool: install: /usr/bin/install -c sg_sync /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_buffer /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_write_x /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_write_x libtool: install: /usr/bin/install -c sg_zone /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_zone libtool: install: /usr/bin/install -c sg_copy_results /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sgp_dd make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/src' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/src' Making install in doc make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/doc' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_elem_status.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 '/home/buildroot/autobuild/instance-0/output-1/target/usr/share/man/man8' /usr/bin/install -c -m 644 sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/buildroot/autobuild/instance-0/output-1/target/usr/share/man/man8' make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/doc' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/doc' Making install in scripts make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/scripts' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/instance-0/output-1/target/usr/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/buildroot/autobuild/instance-0/output-1/target/usr/bin' make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/scripts' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/scripts' make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45' make[3]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45' make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45' make[1]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45' for prog in compare_and_write copy_results dd decode_sense emc_trespass format get_config get_lba_status ident inq logs luns map26 map sgm_dd modes opcodes sgp_dd persist prevent raw rbuf rdac read readcap read_block_limits read_attr read_buffer read_long reassign referrals rep_zones requests reset reset_wp rmsn rtpg safte sanitize sat_identify sat_phy_event sat_read_gplog sat_set_features scan senddiag ses ses_microcode start stpg sync test_rwbuf timestamp turs unmap verify vpd write_buffer write_long write_same write_verify wr_mode xcopy zone; do rm -f /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/sg_${prog} ; done for prog in logging_level mandat readcap ready satl start stop temperature; do rm -f /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/scsi_${prog} ; done for prog in sginfo sgm_dd sgp_dd; do rm -f /home/buildroot/autobuild/instance-0/output-1/target/usr/bin/${prog}; done tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2.tar.gz: OK (sha256: 3d2b2375e2874933f9aa59d4f25bb6b334747219eb0d7a076974e61222d59bf6) >>> tstools 08f6be304040e7b84760ac3920bcff4a563b6cd2 Extracting gzip -d -c /home/buildroot/autobuild/instance-0/dl/tstools/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-0/output-1/build/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2 -xf - >>> tstools 08f6be304040e7b84760ac3920bcff4a563b6cd2 Patching Applying 0001-build-get-along-with-buildroot.patch using patch: patching file Makefile Hunk #2 succeeded at 449 (offset 3 lines). >>> tstools 08f6be304040e7b84760ac3920bcff4a563b6cd2 Configuring >>> tstools 08f6be304040e7b84760ac3920bcff4a563b6cd2 Building PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" AR="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-ar" AS="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-as" LD="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-ld" NM="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-nm" CC="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc" GCC="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc" CPP="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-cpp" CXX="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-g++" FC="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gfortran" F77="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gfortran" RANLIB="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-ranlib" READELF="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-readelf" STRIP="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-strip" OBJCOPY="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-objcopy" OBJDUMP="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/instance-0/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-0/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-0/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-0/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-as" DEFAULT_LINKER="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/buildroot/autobuild/instance-0/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/instance-0/output-1/host/nds32le-buildroot-linux-gnu/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no LD="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc" PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j1 -C /home/buildroot/autobuild/instance-0/output-1/build/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2 make[1]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2' mkdir bin mkdir lib mkdir obj /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c esfilter.c -o obj/esfilter.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c accessunit.c -o obj/accessunit.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c avs.c -o obj/avs.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c ac3.c -o obj/ac3.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c adts.c -o obj/adts.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c bitdata.c -o obj/bitdata.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c es.c -o obj/es.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c filter.c -o obj/filter.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c fmtx.c -o obj/fmtx.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c h222.c -o obj/h222.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c h262.c -o obj/h262.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c audio.c -o obj/audio.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c l2audio.c -o obj/l2audio.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC l2audio.c: In function 'peek_frame_header': l2audio.c:146:16: warning: variable 'framesize' set but not used [-Wunused-but-set-variable] unsigned int framesize, framelen; ^~~~~~~~~ l2audio.c:144:25: warning: variable 'sampling' set but not used [-Wunused-but-set-variable] unsigned int bitrate, sampling; ^~~~~~~~ /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c misc.c -o obj/misc.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c nalunit.c -o obj/nalunit.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c ps.c -o obj/ps.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c pes.c -o obj/pes.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC pes.c: In function 'find_ESCR_in_PES': pes.c:3541:9: warning: variable 'packet_length' set but not used [-Wunused-but-set-variable] int packet_length; ^~~~~~~~~~~~~ /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c pidint.c -o obj/pidint.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c printing.c -o obj/printing.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c reverse.c -o obj/reverse.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c ts.c -o obj/ts.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c tsplay_innards.c -o obj/tsplay_innards.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c tswrite.c -o obj/tswrite.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c pcap.c -o obj/pcap.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c ethernet.c -o obj/ethernet.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c ipv4.c -o obj/ipv4.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC rm -f lib/libtstools.a ar rc lib/libtstools.a obj/accessunit.o obj/avs.o obj/ac3.o obj/adts.o obj/bitdata.o obj/es.o obj/filter.o obj/fmtx.o obj/h222.o obj/h262.o obj/audio.o obj/l2audio.o obj/misc.o obj/nalunit.o obj/ps.o obj/pes.o obj/pidint.o obj/printing.o obj/reverse.o obj/ts.o obj/tsplay_innards.o obj/tswrite.o obj/pcap.o obj/ethernet.o obj/ipv4.o /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/esfilter.o -o bin/esfilter -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c ts2es.c -o obj/ts2es.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/ts2es.o -o bin/ts2es -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c es2ts.c -o obj/es2ts.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/es2ts.o -o bin/es2ts -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c esdots.c -o obj/esdots.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/esdots.o -o bin/esdots -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c esmerge.c -o obj/esmerge.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/esmerge.o -o bin/esmerge -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c esreport.c -o obj/esreport.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/esreport.o -o bin/esreport -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c esreverse.c -o obj/esreverse.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/esreverse.o -o bin/esreverse -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c ps2ts.c -o obj/ps2ts.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/ps2ts.o -o bin/ps2ts -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c psreport.c -o obj/psreport.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/psreport.o -o bin/psreport -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c psdots.c -o obj/psdots.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/psdots.o -o bin/psdots -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c stream_type.c -o obj/stream_type.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/stream_type.o -o bin/stream_type -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c tsdvbsub.c -o obj/tsdvbsub.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/tsdvbsub.o -o bin/tsdvbsub -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c tsinfo.c -o obj/tsinfo.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/tsinfo.o -o bin/tsinfo -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c tsreport.c -o obj/tsreport.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/tsreport.o -o bin/tsreport -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c tsplay.c -o obj/tsplay.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC tsplay.c: In function 'main': tsplay.c:354:10: warning: variable 'use_network' set but not used [-Wunused-but-set-variable] int use_network = FALSE; ^~~~~~~~~~~ /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/tsplay.o -o bin/tsplay -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c tsserve.c -o obj/tsserve.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/tsserve.o -o bin/tsserve -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c ts_packet_insert.c -o obj/ts_packet_insert.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC In file included from ts_packet_insert.c:33: ts_packet_insert.c: In function 'insert_packets': ts_packet_insert.c:131:12: warning: suggest parentheses around assignment used as truth value [-Wparentheses] assert(rv=TS_PACKET_SIZE); ^~ /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/ts_packet_insert.o -o bin/ts_packet_insert -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c m2ts2ts.c -o obj/m2ts2ts.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/m2ts2ts.o -o bin/m2ts2ts -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c pcapreport.c -o obj/pcapreport.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC pcapreport.c: In function 'stream_gen_names2': pcapreport.c:383:48: warning: '%s' directive output may be truncated writing up to 31 bytes into a region of size between 6 and 54 [-Wformat-truncation=] snprintf(identifier, 64, "%s_%u.%u.%u.%u_%u%s", ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ vlan_name("_V", st, sizeof(pbuf), pbuf), ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ dest_addr >> 24, (dest_addr >> 16) & 0xff, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ (dest_addr >> 8) & 0xff, dest_addr & 0xff, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ dest_port, ~~~~~~~~~~ section_name(ctx, st, pbuf2, sizeof(pbuf2))); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ pcapreport.c:383:5: note: 'snprintf' output between 11 and 90 bytes into a destination of size 64 snprintf(identifier, 64, "%s_%u.%u.%u.%u_%u%s", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ vlan_name("_V", st, sizeof(pbuf), pbuf), ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ dest_addr >> 24, (dest_addr >> 16) & 0xff, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ (dest_addr >> 8) & 0xff, dest_addr & 0xff, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ dest_port, ~~~~~~~~~~ section_name(ctx, st, pbuf2, sizeof(pbuf2))); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ pcapreport.c:404:41: warning: '%s' directive output may be truncated writing between 2 and 3 bytes into a region of size between 0 and 63 [-Wformat-truncation=] snprintf(name + base_len, 64, "%s.%s", identifier, ^~ pcapreport.c:404:7: note: 'snprintf' output between 4 and 68 bytes into a destination of size 64 snprintf(name + base_len, 64, "%s.%s", identifier, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ (rtp_header != NULL && rtp_header->is_rtp_raw) ? "rtp" : "ts"); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ pcapreport.c:413:38: warning: '.csv' directive output may be truncated writing 4 bytes into a region of size between 1 and 64 [-Wformat-truncation=] snprintf(name + base_len, 64, "%s.csv", identifier); ^~~~ pcapreport.c:413:5: note: 'snprintf' output between 5 and 68 bytes into a destination of size 64 snprintf(name + base_len, 64, "%s.csv", identifier); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/pcapreport.o -o bin/pcapreport -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c tsfilter.c -o obj/tsfilter.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC tsfilter.c: In function 'main': tsfilter.c:65:9: warning: variable 'verbose' set but not used [-Wunused-but-set-variable] int verbose = FALSE; ^~~~~~~ /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/tsfilter.o -o bin/tsfilter -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -c rtp2264.c -o obj/rtp2264.o -Wall -O2 -g -D_FILE_OFFSET_BITS=64 -I. -fPIC /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc obj/rtp2264.o -o bin/rtp2264 -fPIC lib/libtstools.a -g -fPIC -lm /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc -shared -o lib/libtstools.so obj/accessunit.o obj/avs.o obj/ac3.o obj/adts.o obj/bitdata.o obj/es.o obj/filter.o obj/fmtx.o obj/h222.o obj/h262.o obj/audio.o obj/l2audio.o obj/misc.o obj/nalunit.o obj/ps.o obj/pes.o obj/pidint.o obj/printing.o obj/reverse.o obj/ts.o obj/tsplay_innards.o obj/tswrite.o obj/pcap.o obj/ethernet.o obj/ipv4.o -lc make[1]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2' >>> tstools 08f6be304040e7b84760ac3920bcff4a563b6cd2 Installing to target PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" AR="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-ar" AS="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-as" LD="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-ld" NM="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-nm" CC="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc" GCC="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gcc" CPP="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-cpp" CXX="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-g++" FC="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gfortran" F77="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-gfortran" RANLIB="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-ranlib" READELF="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-readelf" STRIP="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-strip" OBJCOPY="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-objcopy" OBJDUMP="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/instance-0/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-0/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-0/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-0/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-as" DEFAULT_LINKER="/home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/buildroot/autobuild/instance-0/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/instance-0/output-1/host/nds32le-buildroot-linux-gnu/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-0/output-1/build/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2 DESTDIR=/home/buildroot/autobuild/instance-0/output-1/target install make[1]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2' make[1]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2' >>> Finalizing host directory >>> Finalizing target directory /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/buildroot/autobuild/instance-0/output-1/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/autobuild/instance-0/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /home/buildroot/autobuild/instance-0/output-1/build/busybox-1.31.1/.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/instance-0/output-1/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/instance-0/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/buildroot/autobuild/instance-0/output-1/build/busybox-1.31.1/.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/instance-0/output-1/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/instance-0/output-1/target/etc/shells; fi rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/share/lua/5.3/doc rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/luarocks mkdir -p /home/buildroot/autobuild/instance-0/output-1/target/etc echo "buildroot" > /home/buildroot/autobuild/instance-0/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/instance-0/output-1/target/etc/hosts mkdir -p /home/buildroot/autobuild/instance-0/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/instance-0/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/instance-0/output-1/target/etc/shadow rm -f /home/buildroot/autobuild/instance-0/output-1/target/bin/sh if [ -x /home/buildroot/autobuild/instance-0/output-1/target/sbin/swapon -a -x /home/buildroot/autobuild/instance-0/output-1/target/sbin/swapoff ]; then /bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/buildroot/autobuild/instance-0/output-1/target/etc/inittab; else /bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/buildroot/autobuild/instance-0/output-1/target/etc/inittab; fi printf '%s\n' C en_US locale-archive > /home/buildroot/autobuild/instance-0/output-1/build/locales.nopurge for dir in /home/buildroot/autobuild/instance-0/output-1/target/usr/share/locale /home/buildroot/autobuild/instance-0/output-1/target/usr/share/X11/locale /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/instance-0/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/autobuild/instance-0/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/instance-0/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/instance-0/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/include /home/buildroot/autobuild/instance-0/output-1/target/usr/share/aclocal \ /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/pkgconfig /home/buildroot/autobuild/instance-0/output-1/target/usr/share/pkgconfig \ /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/cmake /home/buildroot/autobuild/instance-0/output-1/target/usr/share/cmake \ /home/buildroot/autobuild/instance-0/output-1/target/usr/doc find /home/buildroot/autobuild/instance-0/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/instance-0/output-1/target/lib/ /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/ /home/buildroot/autobuild/instance-0/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f find: '/home/buildroot/autobuild/instance-0/output-1/target/usr/libexec/': No such file or directory rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/share/gdb rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/share/bash-completion rm -rf /home/buildroot/autobuild/instance-0/output-1/target/etc/bash_completion.d rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/share/zsh rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/man /home/buildroot/autobuild/instance-0/output-1/target/usr/share/man rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/info /home/buildroot/autobuild/instance-0/output-1/target/usr/share/info rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/doc /home/buildroot/autobuild/instance-0/output-1/target/usr/share/doc rm -rf /home/buildroot/autobuild/instance-0/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/instance-0/output-1/target/usr/share 2>/dev/null || true rm -rf /home/buildroot/autobuild/instance-0/output-1/target/lib/debug /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/debug find /home/buildroot/autobuild/instance-0/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/buildroot/autobuild/instance-0/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/instance-0/output-1/host/bin/nds32le-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/buildroot/autobuild/instance-0/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/instance-0/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/instance-0/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2020.08-git-06820-gff28afdcc35"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2020.08-git"; \ echo "PRETTY_NAME=\"Buildroot 2020.08-git\"" \ ) > /home/buildroot/autobuild/instance-0/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/instance-0/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/buildroot/autobuild/instance-0/output-1/per-package /home/buildroot/autobuild/instance-0/buildroot/support/scripts/fix-rpath target cat /home/buildroot/autobuild/instance-0/output-1/build/berkeleydb-5.3.28/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/busybox-1.31.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/c-periphery-2.2.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/exim-4.94/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/ficl-4.1.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/genext2fs-1.4.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/initscripts/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/iodine-0.7.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libev-4.27/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libnfc-1.8.0/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libopenssl-1.1.1g/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libpcap-1.9.1/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libuwsc-3.3.5/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/libzlib-1.2.11/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/lua-5.3.5/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/lua-cqueues-20200603/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/luainterpreter/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/openssl/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/pcre-8.44/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton-init-common/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton-init-sysv/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain-external-andes-nds32/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain-external/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2/.files-list.txt /home/buildroot/autobuild/instance-0/output-1/build/zlib/.files-list.txt > /home/buildroot/autobuild/instance-0/output-1/build/packages-file-list.txt cat /home/buildroot/autobuild/instance-0/output-1/build/host-autoconf-2.69/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-autoconf-archive-2019.01.06/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-automake-1.15.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-berkeleydb-5.3.28/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-bison-3.6.4/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-cmake-3.15.5/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-expat-2.2.9/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-flex-2.6.4/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gettext-gnu-0.20.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-gettext/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-libopenssl-1.1.1g/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-libtextstyle-0.20.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-libtool-2.4.6/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-libxml2-2.9.10/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-libyaml-0.2.5/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-libzlib-1.2.11/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-m4-1.4.18/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-openssl/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-patchelf-0.9/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-pcre-8.44/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-pkgconf-1.6.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-python-2.7.18/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-python-inflection-0.3.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-python-mako-1.1.2/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-python-markupsafe-1.1.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-python-pyyaml-5.3.1/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-python-setuptools-44.0.0/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-sdbusplus-4212292bcf136d04b38ba5116aa568b0fa312798/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-skeleton/.files-list-host.txt /home/buildroot/autobuild/instance-0/output-1/build/host-zlib/.files-list-host.txt > /home/buildroot/autobuild/instance-0/output-1/build/packages-file-list-host.txt cat /home/buildroot/autobuild/instance-0/output-1/build/berkeleydb-5.3.28/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/c-periphery-2.2.1/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/ficl-4.1.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libev-4.27/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libnfc-1.8.0/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libopenssl-1.1.1g/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libpcap-1.9.1/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libuwsc-3.3.5/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/libzlib-1.2.11/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/lua-5.3.5/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/pcre-8.44/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/sg3_utils-1.45/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/skeleton-init-common/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain-external-andes-nds32/.files-list-staging.txt /home/buildroot/autobuild/instance-0/output-1/build/toolchain/.files-list-staging.txt > /home/buildroot/autobuild/instance-0/output-1/build/packages-file-list-staging.txt touch /home/buildroot/autobuild/instance-0/output-1/target/usr ln -snf /home/buildroot/autobuild/instance-0/output-1/host/nds32le-buildroot-linux-gnu/sysroot /home/buildroot/autobuild/instance-0/output-1/staging make: Leaving directory '/home/buildroot/autobuild/instance-0/buildroot' make: Entering directory '/home/buildroot/autobuild/instance-0/buildroot' >>> Buildroot 2020.08-git-06820-gff28afdcc35 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-andes-nds32 Collecting legal info >>> toolchain Collecting legal info >>> berkeleydb 5.3.28 Collecting legal info LICENSE: OK (sha256: b78815181a53241f9347c6b47d1031fd669946f863e1edc807a291354cec024b) >>> busybox 1.31.1 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) >>> c-periphery 2.2.1 Collecting legal info LICENSE: OK (sha256: 7121a0a2ba36ed9388be2f1a916f0e3584d8e49cc7888fbcfcf83bab2a8bebef) >>> host-cmake 3.15.5 Collecting legal info Copyright.txt: OK (sha256: dc628fb936a5d229296d42083f9a8218aa32204c016919e784404c9ec58776e9) >>> host-pkgconf 1.6.1 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> exim 4.94 Collecting legal info LICENCE: OK (sha256: 49240db527b7e55b312a46fc59794fde5dd006422e422257f4f057bfd27b3c8f) >>> host-berkeleydb 5.3.28 Collecting legal info LICENSE: OK (sha256: b78815181a53241f9347c6b47d1031fd669946f863e1edc807a291354cec024b) >>> host-openssl Collecting legal info >>> host-libopenssl 1.1.1g Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> host-zlib Collecting legal info >>> host-libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> host-pcre 8.44 Collecting legal info LICENCE: OK (sha256: 0dd9c13864dbb9ee4d77a1557e96be29b2d719fb6584192ee36611aae264c4a3) >>> openssl Collecting legal info >>> libopenssl 1.1.1g Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> pcre 8.44 Collecting legal info LICENCE: OK (sha256: 0dd9c13864dbb9ee4d77a1557e96be29b2d719fb6584192ee36611aae264c4a3) >>> ficl 4.1.0 Collecting legal info ReadMe.txt: OK (sha256: 1d1dd1f1cde52e8b607c5ccb6a2e5de878fd1719b8c5a4d31b9cdb343c203d0d) >>> genext2fs 1.4.1 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> initscripts Collecting legal info >>> iodine 0.7.0 Collecting legal info README: OK (sha256: f41a252b2218759aa351270b7ad9791bdd323836b940e35c0614837a5d24dcb7) >>> libev 4.27 Collecting legal info LICENSE: OK (sha256: c4dd1a5bc38b041a320b93c5d6c08f5c41a63f2ce718ee16cfcb757fad448199) >>> libnfc 1.8.0 Collecting legal info COPYING: OK (sha256: 9ccf26cfe845e0eb8bb58053e47366e7ab6b697ae010f7650978d4b71b7d1fc1) >>> host-autoconf 2.69 Collecting legal info COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> libpcap 1.9.1 Collecting legal info LICENSE: OK (sha256: 8a54594d257e14a5260ac770f1633516cb51e3fc28c40136ce2697014eda7afd) >>> host-bison 3.6.4 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> host-gettext Collecting legal info >>> host-gettext-gnu 0.20.1 Collecting legal info COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) gettext-runtime/intl/COPYING.LIB: OK (sha256: 3fe5361f24b7c49ba12911c08f5a33f9cb18871d95d9fb881f5b8a4793e04288) >>> host-libtextstyle 0.20.1 Collecting legal info COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> host-libxml2 2.9.10 Collecting legal info COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd) >>> libuwsc 3.3.5 Collecting legal info LICENSE: OK (sha256: 99efed4bbc0b62f96f999ef23399e38234fb91651af734fd389a52b033a85b55) >>> lua 5.3.5 Collecting legal info ERROR: No hash found for doc/readme.html >>> lua-cqueues 20200603 Collecting legal info LICENSE: OK (sha256: 5f4b1f94047790eadf8fd0f9a8e3bd2895bea4c9a2c0f8bf7cd8c8e57caa5219) >>> luainterpreter Collecting legal info >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-sdbusplus 4212292bcf136d04b38ba5116aa568b0fa312798 Collecting legal info LICENSE: OK (sha256: b40930bbcf80744c86c46a12bc9da056641d722716c378f5659b9e555ef833e1) >>> host-autoconf-archive 2019.01.06 Collecting legal info COPYING: OK (sha256: e6037104443f9a7829b2aa7c5370d0789a7bda3ca65a0b904cdc0c2e285d9195) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-python 2.7.18 Collecting legal info LICENSE: OK (sha256: de4d1f2d2ad5ad0cfd1657a106476b31cb5db5ef9d1ff842b237c0c81f0c8a23) >>> host-expat 2.2.9 Collecting legal info COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76) >>> host-python-inflection 0.3.1 Collecting legal info LICENSE: OK (sha256: 4a3f52ac1012a90db398e4c55f1d1bea501dddafef8a4b3adb7533b1d820e148) >>> host-python-setuptools 44.0.0 Collecting legal info LICENSE: OK (sha256: c32a3ac395af6321efd28be73d06a00f0db6ab887d1c21d4fec46128d2056d5a) >>> host-python-mako 1.1.2 Collecting legal info LICENSE: OK (sha256: 47cd0d41b1092f9161cfb629ed15e5cea185144710ff4633a4281ef088ff5de7) >>> host-python-markupsafe 1.1.1 Collecting legal info LICENSE.rst: OK (sha256: 489a8e1108509ed98a37bb983e11e0f7e1d31f0bd8f99a79c8448e7ff37d07ea) >>> host-python-pyyaml 5.3.1 Collecting legal info LICENSE: OK (sha256: c40112449f254b9753045925248313e9270efa36d226b22d82d4cc6c43c57f29) >>> host-libyaml 0.2.5 Collecting legal info License: OK (sha256: c40112449f254b9753045925248313e9270efa36d226b22d82d4cc6c43c57f29) >>> sg3_utils 1.45 Collecting legal info COPYING: OK (sha256: d516b8b337a77e3d4c65dffe708ca7fb25b1cb4ec77ec362cf11ed659b9250bc) BSD_LICENSE: OK (sha256: 8ddd1d82f2be2f5cbd5b5c3b5c2ee94a90d2ca7112958448da74dd78384fd96a) >>> tstools 08f6be304040e7b84760ac3920bcff4a563b6cd2 Collecting legal info WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-andes-nds32: cannot save license (TOOLCHAIN_EXTERNAL_ANDES_NDS32_LICENSE_FILES not defined) WARNING: tstools-08f6be304040e7b84760ac3920bcff4a563b6cd2: cannot save license (TSTOOLS_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/instance-0/output-1/legal-info make: Leaving directory '/home/buildroot/autobuild/instance-0/buildroot'