>>> system-config-printer 1.5.15 Downloading wget --passive-ftp -nd -t 3 --no-check-certificate -O '/tmp/instance-6/output-1/build/.system-config-printer-1.5.15.tar.xz.swXr6T/output' 'https://github.com/OpenPrinting/system-config-printer/releases/download/v1.5.15/system-config-printer-1.5.15.tar.xz' --2021-08-01 15:38:17-- https://github.com/OpenPrinting/system-config-printer/releases/download/v1.5.15/system-config-printer-1.5.15.tar.xz Resolving github.com (github.com)... 140.82.121.4 Connecting to github.com (github.com)|140.82.121.4|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://github-releases.githubusercontent.com/35281636/60b1d300-55aa-11eb-8aaf-9a547f479a5d?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20210801%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20210801T153817Z&X-Amz-Expires=300&X-Amz-Signature=f66715d5926970ec0ec82004b05db555f93a21aaeaa8d8e5d656acf264a83c36&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=35281636&response-content-disposition=attachment%3B%20filename%3Dsystem-config-printer-1.5.15.tar.xz&response-content-type=application%2Foctet-stream [following] --2021-08-01 15:38:17-- https://github-releases.githubusercontent.com/35281636/60b1d300-55aa-11eb-8aaf-9a547f479a5d?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20210801%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20210801T153817Z&X-Amz-Expires=300&X-Amz-Signature=f66715d5926970ec0ec82004b05db555f93a21aaeaa8d8e5d656acf264a83c36&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=35281636&response-content-disposition=attachment%3B%20filename%3Dsystem-config-printer-1.5.15.tar.xz&response-content-type=application%2Foctet-stream Resolving github-releases.githubusercontent.com (github-releases.githubusercontent.com)... 185.199.110.154, 185.199.111.154, 185.199.108.154, ... Connecting to github-releases.githubusercontent.com (github-releases.githubusercontent.com)|185.199.110.154|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1005764 (982K) [application/octet-stream] Saving to: '/tmp/instance-6/output-1/build/.system-config-printer-1.5.15.tar.xz.swXr6T/output' 0K .......... .......... .......... .......... .......... 5% 8.18M 0s 50K .......... .......... .......... .......... .......... 10% 18.3M 0s 100K .......... .......... .......... .......... .......... 15% 8.56M 0s 150K .......... .......... .......... .......... .......... 20% 10.2M 0s 200K .......... .......... .......... .......... .......... 25% 11.0M 0s 250K .......... .......... .......... .......... .......... 30% 22.7M 0s 300K .......... .......... .......... .......... .......... 35% 11.4M 0s 350K .......... .......... .......... .......... .......... 40% 20.3M 0s 400K .......... .......... .......... .......... .......... 45% 11.9M 0s 450K .......... .......... .......... .......... .......... 50% 9.48M 0s 500K .......... .......... .......... .......... .......... 55% 25.8M 0s 550K .......... .......... .......... .......... .......... 61% 9.31M 0s 600K .......... .......... .......... .......... .......... 66% 98.6M 0s 650K .......... .......... .......... .......... .......... 71% 8.52M 0s 700K .......... .......... .......... .......... .......... 76% 33.0M 0s 750K .......... .......... .......... .......... .......... 81% 7.03M 0s 800K .......... .......... .......... .......... .......... 86% 200M 0s 850K .......... .......... .......... .......... .......... 91% 14.9M 0s 900K .......... .......... .......... .......... .......... 96% 17.0M 0s 950K .......... .......... .......... .. 100% 9.23M=0.07s 2021-08-01 15:38:17 (13.1 MB/s) - '/tmp/instance-6/output-1/build/.system-config-printer-1.5.15.tar.xz.swXr6T/output' saved [1005764/1005764] system-config-printer-1.5.15.tar.xz: OK (sha256: fbd226ce215bf014213dded81b43b9d4d90470524f5bf7cd21ecc71d4aefa689) >>> system-config-printer 1.5.15 Extracting xzcat /tmp/instance-6/dl/system-config-printer/system-config-printer-1.5.15.tar.xz | tar --strip-components=1 -C /tmp/instance-6/output-1/build/system-config-printer-1.5.15 -xf - >>> system-config-printer 1.5.15 Patching Applying 0001-Add-option-to-disable-xmlto-manual-generation.patch using patch: patching file Makefile.am patching file configure.ac Applying 0002-configure-accept-non-system-cups-config.patch using patch: patching file configure.ac >>> system-config-printer 1.5.15 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /tmp/instance-6/output-1/build/system-config-printer-1.5.15 -name $file); do cp support/gnuconfig/$file $i; done; done >>> system-config-printer 1.5.15 Configuring >>> system-config-printer 1.5.15 Autoreconfiguring Makefile.am:403: warning: PYTEST-py.test: non-POSIX variable name >>> system-config-printer 1.5.15 Patching libtool (cd /tmp/instance-6/output-1/build/system-config-printer-1.5.15/ && rm -rf config.cache && PATH="/tmp/instance-6/output-1/host/bin:/tmp/instance-6/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" AR="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-ar" AS="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-as" LD="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-ld" NM="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-nm" CC="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc" GCC="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc" CPP="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-cpp" CXX="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++" FC="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-gfortran" F77="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-gfortran" RANLIB="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-ranlib" READELF="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-readelf" STRIP="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-strip" OBJCOPY="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-objcopy" OBJDUMP="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/tmp/instance-6/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/tmp/instance-6/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/tmp/instance-6/output-1/host/include" LDFLAGS_FOR_BUILD="-L/tmp/instance-6/output-1/host/lib -Wl,-rpath,/tmp/instance-6/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-as" DEFAULT_LINKER="/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mlongcalls -mauto-litpools -Os -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mlongcalls -mauto-litpools -Os -g0 " LDFLAGS="" FCFLAGS="-mlongcalls -mauto-litpools -Os -g0" FFLAGS="-mlongcalls -mauto-litpools -Os -g0" PKG_CONFIG="/tmp/instance-6/output-1/host/bin/pkg-config" STAGING_DIR="/tmp/instance-6/output-1/host/xtensa-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes CONFIG_SITE=/dev/null ./configure --target=xtensa-buildroot-linux-uclibc --host=xtensa-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared --with-cups-config=/tmp/instance-6/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/bin/cups-config --with-udev-rules=no --with-systemdsystemunitdir=no ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-fop, --enable-ipv6, --disable-static, --enable-shared checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for xtensa-buildroot-linux-uclibc-strip... /tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-strip checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether NLS is requested... no checking for intltool-update... /tmp/instance-6/output-1/host/bin/intltool-update checking for intltool-merge... /tmp/instance-6/output-1/host/bin/intltool-merge checking for intltool-extract... /tmp/instance-6/output-1/host/bin/intltool-extract checking for xgettext... /tmp/instance-6/output-1/host/bin/xgettext checking for msgmerge... /tmp/instance-6/output-1/host/bin/msgmerge checking for msgfmt... /tmp/instance-6/output-1/host/bin/msgfmt checking for gmsgfmt... /tmp/instance-6/output-1/host/bin/msgfmt checking for perl... /usr/bin/perl checking for perl >= 5.8.1... 5.30.0 checking for XML::Parser... ok checking for a sed that does not truncate output... /usr/bin/sed checking for msgfmt... (cached) /tmp/instance-6/output-1/host/bin/msgfmt checking for gmsgfmt... (cached) /tmp/instance-6/output-1/host/bin/msgfmt checking for xgettext... (cached) /tmp/instance-6/output-1/host/bin/xgettext checking for msgmerge... (cached) /tmp/instance-6/output-1/host/bin/msgmerge checking for style of include used by make... GNU checking for xtensa-buildroot-linux-uclibc-gcc... /tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc accepts -g... yes checking for /tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc option to accept ISO C89... none needed checking whether /tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc understands -c and -o together... yes checking dependency style of /tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc... none checking build system type... x86_64-pc-linux-gnu checking host system type... xtensa-buildroot-linux-uclibc checking for ld used by /tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc... /tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-ld checking if the linker (/tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-ld) is GNU ld... yes checking for shared library run path origin... done checking how to run the C preprocessor... /tmp/instance-6/output-1/host/bin/xtensa-buildroot-linux-uclibc-cpp checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for the common suffixes of directories in the library search path... lib,lib checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking whether to use NLS... no checking for a Python interpreter with version >= 3... python checking for python... /tmp/instance-6/output-1/host/bin/python checking for python version... 3.9 checking for python platform... linux checking for python script directory... ${prefix}/lib/python3.9/site-packages checking for python extension module directory... ${exec_prefix}/lib/python3.9/site-packages checking pkg-config is at least version 0.9.0... yes checking for GLIB... yes checking pkg-config is at least version 0.9.0... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating po/Makefile.in config.status: creating system-config-printer config.status: creating system-config-printer-applet config.status: creating install-printerdriver config.status: creating dbus/scp-dbus-service config.status: creating udev/configure-printer@.service config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing depfiles commands config.status: executing po/stamp-it commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-fop, --enable-ipv6, --disable-static, --enable-shared >>> system-config-printer 1.5.15 Building PATH="/tmp/instance-6/output-1/host/bin:/tmp/instance-6/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" /usr/bin/make -j96 -C /tmp/instance-6/output-1/build/system-config-printer-1.5.15/ make[1]: Entering directory '/tmp/instance-6/output-1/build/system-config-printer-1.5.15' Making all in po make[2]: Entering directory '/tmp/instance-6/output-1/build/system-config-printer-1.5.15/po' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/tmp/instance-6/output-1/build/system-config-printer-1.5.15/po' make[2]: Entering directory '/tmp/instance-6/output-1/build/system-config-printer-1.5.15' LC_ALL=C /tmp/instance-6/output-1/host/bin/intltool-merge -x -u -c ./po/.intltool-merge-cache ./po system-config-printer.appdata.xml.in system-config-printer.appdata.xml LC_ALL=C /tmp/instance-6/output-1/host/bin/intltool-merge -d -u -c ./po/.intltool-merge-cache ./po system-config-printer.desktop.in system-config-printer.desktop LC_ALL=C /tmp/instance-6/output-1/host/bin/intltool-merge -d -u -c ./po/.intltool-merge-cache ./po print-applet.desktop.in print-applet.desktop sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@datadir\@|/usr/share|" \ -e "s|\@localedir\@|/usr/share/locale|" \ -e "s|\@VERSION\@|1.5.15|" \ -e "s|\@PACKAGE\@|system-config-printer|" \ config.py.in > config.py sed \ -e "s|\@bindir\@|/usr/bin|" \ dbus/org.fedoraproject.Config.Printing.service.in >dbus/org.fedoraproject.Config.Printing.service if [ "." != "." ]; then \ cp ./setup.py .; \ /usr/bin/mkdir -p cupshelpers; \ for file in cupshelpers/__init__.py cupshelpers/cupshelpers.py cupshelpers/installdriver.py cupshelpers/ppds.py cupshelpers/openprinting.py cupshelpers/xmldriverprefs.py; do \ cp ./$file $file; \ done; \ fi /usr/bin/mkdir -p cupshelpers touch .stamp-distutils-in-builddir sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@sysconfdir\@|/etc|" \ -e "s|\@cupsserverbindir\@|/usr/lib/cups|" \ cupshelpers/config.py.in > cupshelpers/config.py /tmp/instance-6/output-1/host/bin/python setup.py build running build running build_py creating build creating build/lib creating build/lib/cupshelpers copying cupshelpers/installdriver.py -> build/lib/cupshelpers copying cupshelpers/config.py -> build/lib/cupshelpers copying cupshelpers/ppds.py -> build/lib/cupshelpers copying cupshelpers/cupshelpers.py -> build/lib/cupshelpers copying cupshelpers/openprinting.py -> build/lib/cupshelpers copying cupshelpers/__init__.py -> build/lib/cupshelpers copying cupshelpers/xmldriverprefs.py -> build/lib/cupshelpers Generating and caching the translation database Merging translations into system-config-printer.desktop. Generating and caching the translation database Merging translations into system-config-printer.appdata.xml. CREATED system-config-printer.appdata.xml Generating and caching the translation database Merging translations into print-applet.desktop. make[2]: Leaving directory '/tmp/instance-6/output-1/build/system-config-printer-1.5.15' make[1]: Leaving directory '/tmp/instance-6/output-1/build/system-config-printer-1.5.15' >>> system-config-printer 1.5.15 Installing to target PATH="/tmp/instance-6/output-1/host/bin:/tmp/instance-6/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" /usr/bin/make -j96 DESTDIR=/tmp/instance-6/output-1/target install -C /tmp/instance-6/output-1/build/system-config-printer-1.5.15/ make[1]: Entering directory '/tmp/instance-6/output-1/build/system-config-printer-1.5.15' Making install in po make[2]: Entering directory '/tmp/instance-6/output-1/build/system-config-printer-1.5.15/po' make[2]: Nothing to be done for 'install'. make[2]: Leaving directory '/tmp/instance-6/output-1/build/system-config-printer-1.5.15/po' make[2]: Entering directory '/tmp/instance-6/output-1/build/system-config-printer-1.5.15' /tmp/instance-6/output-1/host/bin/python setup.py build running build running build_py make[3]: Entering directory '/tmp/instance-6/output-1/build/system-config-printer-1.5.15' /tmp/instance-6/output-1/host/bin/python setup.py install --prefix=/tmp/instance-6/output-1/target/usr /usr/bin/mkdir -p '/tmp/instance-6/output-1/target/usr/bin' mkdir -p /tmp/instance-6/output-1/target/usr/share/applications/ /usr/bin/mkdir -p '/tmp/instance-6/output-1/target/usr/share/metainfo' /usr/bin/mkdir -p '/tmp/instance-6/output-1/target/etc/cupshelpers' /usr/bin/mkdir -p '/tmp/instance-6/output-1/target/etc/dbus-1/system.d/' /usr/bin/mkdir -p '/tmp/instance-6/output-1/target/usr/share/dbus-1/interfaces/' /usr/bin/install -c system-config-printer install-printerdriver system-config-printer-applet dbus/scp-dbus-service '/tmp/instance-6/output-1/target/usr/bin' mkdir -p /tmp/instance-6/output-1/target/usr/share/applications/ /usr/bin/install -c -m 644 system-config-printer.appdata.xml '/tmp/instance-6/output-1/target/usr/share/metainfo' /usr/bin/install -c -m 644 dbus/com.redhat.NewPrinterNotification.conf dbus/com.redhat.PrinterDriversInstaller.conf '/tmp/instance-6/output-1/target/etc/dbus-1/system.d/' /usr/bin/install -c -m 644 xml/preferreddrivers.xml '/tmp/instance-6/output-1/target/etc/cupshelpers' /usr/bin/install -c -m 644 dbus/org.fedoraproject.Config.Printing.xml '/tmp/instance-6/output-1/target/usr/share/dbus-1/interfaces/' /usr/bin/mkdir -p '/tmp/instance-6/output-1/target/usr/share/system-config-printer' /usr/bin/mkdir -p '/tmp/instance-6/output-1/target/usr/share/dbus-1/services/' /usr/bin/mkdir -p '/tmp/instance-6/output-1/target/usr/share/system-config-printer' desktop-file-install \ --dir /tmp/instance-6/output-1/target/usr/share/applications/ \ --add-category System \ --add-category Settings \ --add-category HardwareSettings \ --add-category Printing \ --add-category GTK \ system-config-printer.desktop /bin/bash: line 1: desktop-file-install: command not found make[3]: *** [Makefile:1980: install-desktopDATA] Error 127 make[3]: *** Waiting for unfinished jobs.... /usr/bin/install -c -m 644 dbus/org.fedoraproject.Config.Printing.service '/tmp/instance-6/output-1/target/usr/share/dbus-1/services/' /usr/bin/mkdir -p '/tmp/instance-6/output-1/target/usr/share/system-config-printer/troubleshoot/' /usr/bin/mkdir -p '/tmp/instance-6/output-1/target/usr/share/system-config-printer/troubleshoot' /usr/bin/install -c troubleshoot/__init__.py '/tmp/instance-6/output-1/target/usr/share/system-config-printer/troubleshoot/' /usr/bin/install -c -m 644 troubleshoot/base.py troubleshoot/CheckLocalServerPublishing.py troubleshoot/CheckNetworkServerSanity.py troubleshoot/CheckPPDSanity.py troubleshoot/CheckPrinterSanity.py troubleshoot/CheckSELinux.py troubleshoot/CheckUSBPermissions.py troubleshoot/ChooseNetworkPrinter.py troubleshoot/ChoosePrinter.py troubleshoot/DeviceListed.py troubleshoot/ErrorLogCheckpoint.py troubleshoot/ErrorLogFetch.py troubleshoot/ErrorLogParse.py troubleshoot/Locale.py troubleshoot/LocalOrRemote.py troubleshoot/NetworkCUPSPrinterShared.py troubleshoot/PrinterStateReasons.py troubleshoot/PrintTestPage.py troubleshoot/QueueNotEnabled.py troubleshoot/QueueRejectingJobs.py troubleshoot/RemoteAddress.py troubleshoot/SchedulerNotRunning.py troubleshoot/ServerFirewalled.py troubleshoot/Shrug.py troubleshoot/VerifyPackages.py troubleshoot/Welcome.py '/tmp/instance-6/output-1/target/usr/share/system-config-printer/troubleshoot' /usr/bin/install -c check-device-ids.py pysmb.py scp-dbus-service.py system-config-printer.py install-printerdriver.py applet.py '/tmp/instance-6/output-1/target/usr/share/system-config-printer' /usr/bin/mkdir -p '/tmp/instance-6/output-1/target/usr/share/system-config-printer/ui' /usr/bin/install -c -m 644 ui/AboutDialog.ui ui/ConnectDialog.ui ui/ConnectingDialog.ui ui/InstallDialog.ui ui/JobsWindow.ui ui/NewPrinterName.ui ui/NewPrinterWindow.ui ui/PrinterPropertiesDialog.ui ui/PrintersWindow.ui ui/ServerSettingsDialog.ui ui/SMBBrowseDialog.ui ui/statusicon_popupmenu.ui ui/WaitWindow.ui '/tmp/instance-6/output-1/target/usr/share/system-config-printer/ui' /usr/bin/install -c -m 644 asyncconn.py asyncipp.py asyncpk1.py authconn.py config.py cupspk.py debug.py dnssdresolve.py errordialogs.py HIG.py firewallsettings.py gui.py gtkinklevel.py installpackage.py jobviewer.py killtimer.py monitor.py newprinter.py OpenPrintingRequest.py options.py optionwidgets.py PhysicalDevice.py ppdcache.py ppdippstr.py ppdsloader.py printerproperties.py probe_printer.py SearchCriterion.py serversettings.py smburi.py statereason.py timedops.py ToolbarSearchEntry.py userdefault.py '/tmp/instance-6/output-1/target/usr/share/system-config-printer/.' /usr/bin/mkdir -p '/tmp/instance-6/output-1/target/usr/share/system-config-printer/xml' /usr/bin/install -c -m 644 xml/preferreddrivers.rng xml/validate.py '/tmp/instance-6/output-1/target/usr/share/system-config-printer/xml' /usr/bin/mkdir -p '/tmp/instance-6/output-1/target/usr/share/system-config-printer/icons' /usr/bin/install -c -m 644 icons/i-network-printer.png '/tmp/instance-6/output-1/target/usr/share/system-config-printer/icons' running install running build running build_py running install_lib creating /tmp/instance-6/output-1/target/usr/lib/python3.9/site-packages/cupshelpers copying build/lib/cupshelpers/installdriver.py -> /tmp/instance-6/output-1/target/usr/lib/python3.9/site-packages/cupshelpers copying build/lib/cupshelpers/config.py -> /tmp/instance-6/output-1/target/usr/lib/python3.9/site-packages/cupshelpers copying build/lib/cupshelpers/ppds.py -> /tmp/instance-6/output-1/target/usr/lib/python3.9/site-packages/cupshelpers copying build/lib/cupshelpers/cupshelpers.py -> /tmp/instance-6/output-1/target/usr/lib/python3.9/site-packages/cupshelpers copying build/lib/cupshelpers/openprinting.py -> /tmp/instance-6/output-1/target/usr/lib/python3.9/site-packages/cupshelpers copying build/lib/cupshelpers/__init__.py -> /tmp/instance-6/output-1/target/usr/lib/python3.9/site-packages/cupshelpers copying build/lib/cupshelpers/xmldriverprefs.py -> /tmp/instance-6/output-1/target/usr/lib/python3.9/site-packages/cupshelpers byte-compiling /tmp/instance-6/output-1/target/usr/lib/python3.9/site-packages/cupshelpers/installdriver.py to installdriver.pyc byte-compiling /tmp/instance-6/output-1/target/usr/lib/python3.9/site-packages/cupshelpers/config.py to config.pyc byte-compiling /tmp/instance-6/output-1/target/usr/lib/python3.9/site-packages/cupshelpers/ppds.py to ppds.pyc byte-compiling /tmp/instance-6/output-1/target/usr/lib/python3.9/site-packages/cupshelpers/cupshelpers.py to cupshelpers.pyc byte-compiling /tmp/instance-6/output-1/target/usr/lib/python3.9/site-packages/cupshelpers/openprinting.py to openprinting.pyc byte-compiling /tmp/instance-6/output-1/target/usr/lib/python3.9/site-packages/cupshelpers/__init__.py to __init__.pyc byte-compiling /tmp/instance-6/output-1/target/usr/lib/python3.9/site-packages/cupshelpers/xmldriverprefs.py to xmldriverprefs.pyc running install_egg_info Writing /tmp/instance-6/output-1/target/usr/lib/python3.9/site-packages/cupshelpers-1.0-py3.9.egg-info make[3]: Leaving directory '/tmp/instance-6/output-1/build/system-config-printer-1.5.15' make[2]: *** [Makefile:1747: install-am] Error 2 make[2]: Leaving directory '/tmp/instance-6/output-1/build/system-config-printer-1.5.15' make[1]: *** [Makefile:1273: install-recursive] Error 1 make[1]: Leaving directory '/tmp/instance-6/output-1/build/system-config-printer-1.5.15' make: *** [package/pkg-generic.mk:361: /tmp/instance-6/output-1/build/system-config-printer-1.5.15/.stamp_target_installed] Error 2 make: Leaving directory '/tmp/instance-6/buildroot'