>>> systemd 236 Downloading --2018-01-23 08:52:53-- https://github.com/systemd/systemd/archive/v236/systemd-236.tar.gz Resolving github.com (github.com)... 192.30.253.112, 192.30.253.113 Connecting to github.com (github.com)|192.30.253.112|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/systemd/systemd/tar.gz/v236 [following] --2018-01-23 08:52:54-- https://codeload.github.com/systemd/systemd/tar.gz/v236 Resolving codeload.github.com (codeload.github.com)... 192.30.253.121, 192.30.253.120 Connecting to codeload.github.com (codeload.github.com)|192.30.253.121|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/x-gzip] Saving to: '/home/peko/autobuild/instance-1/output/build/.systemd-236.tar.gz.tAy02n/output' 0K .......... .......... .......... .......... .......... 223K 50K .......... .......... .......... .......... .......... 446K 100K .......... .......... .......... .......... .......... 74.5M 150K .......... .......... .......... .......... .......... 95.4M 200K .......... .......... .......... .......... .......... 449K 250K .......... .......... .......... .......... .......... 166M 300K .......... .......... .......... .......... .......... 449K 350K .......... .......... .......... .......... .......... 88.6M 400K .......... .......... .......... .......... .......... 101M 450K .......... .......... .......... .......... .......... 103M 500K .......... .......... .......... .......... .......... 128M 550K .......... .......... .......... .......... .......... 194M 600K .......... .......... .......... .......... .......... 225K 650K .......... .......... .......... .......... .......... 83.6M 700K .......... .......... .......... .......... .......... 111M 750K .......... .......... .......... .......... .......... 114M 800K .......... .......... .......... .......... .......... 252M 850K .......... .......... .......... .......... .......... 156M 900K .......... .......... .......... .......... .......... 126M 950K .......... .......... .......... .......... .......... 149M 1000K .......... .......... .......... .......... .......... 153M 1050K .......... .......... .......... .......... .......... 129M 1100K .......... .......... .......... .......... .......... 105M 1150K .......... .......... .......... .......... .......... 131M 1200K .......... .......... .......... .......... .......... 177M 1250K .......... .......... .......... .......... .......... 184M 1300K .......... .......... .......... .......... .......... 465K 1350K .......... .......... .......... .......... .......... 108M 1400K .......... .......... .......... .......... .......... 141M 1450K .......... .......... .......... .......... .......... 110M 1500K .......... .......... .......... .......... .......... 78.5M 1550K .......... .......... .......... .......... .......... 441K 1600K .......... .......... .......... .......... .......... 94.9M 1650K .......... .......... .......... .......... .......... 462K 1700K .......... .......... .......... .......... .......... 76.9M 1750K .......... .......... .......... .......... .......... 95.5M 1800K .......... .......... .......... .......... .......... 87.5M 1850K .......... .......... .......... .......... .......... 104M 1900K .......... .......... .......... .......... .......... 209M 1950K .......... .......... .......... .......... .......... 198M 2000K .......... .......... .......... .......... .......... 163M 2050K .......... .......... .......... .......... .......... 166M 2100K .......... .......... .......... .......... .......... 171M 2150K .......... .......... .......... .......... .......... 244M 2200K .......... .......... .......... .......... .......... 348M 2250K .......... .......... .......... .......... .......... 171M 2300K .......... .......... .......... .......... .......... 179M 2350K .......... .......... .......... .......... .......... 463K 2400K .......... .......... .......... .......... .......... 94.8M 2450K .......... .......... .......... .......... .......... 195M 2500K .......... .......... .......... .......... .......... 77.9M 2550K .......... .......... .......... .......... .......... 102M 2600K .......... .......... .......... .......... .......... 40.4M 2650K .......... .......... .......... .......... .......... 460K 2700K .......... .......... .......... .......... .......... 83.6M 2750K .......... .......... .......... .......... .......... 106M 2800K .......... .......... .......... .......... .......... 80.7M 2850K .......... .......... .......... .......... .......... 91.9M 2900K .......... .......... .......... .......... .......... 50.9M 2950K .......... .......... .......... .......... .......... 65.9M 3000K .......... .......... .......... .......... .......... 461K 3050K .......... .......... .......... .......... .......... 87.1M 3100K .......... .......... .......... .......... .......... 85.2M 3150K .......... .......... .......... .......... .......... 101M 3200K .......... .......... .......... .......... .......... 107M 3250K .......... .......... .......... .......... .......... 48.3M 3300K .......... .......... .......... .......... .......... 96.2M 3350K .......... .......... .......... .......... .......... 460K 3400K .......... .......... .......... .......... .......... 82.6M 3450K .......... .......... .......... .......... .......... 65.6M 3500K .......... .......... .......... .......... .......... 123M 3550K .......... .......... .......... .......... .......... 104M 3600K .......... .......... .......... .......... .......... 69.2M 3650K .......... .......... .......... .......... .......... 72.3M 3700K .......... .......... .......... .......... .......... 460K 3750K .......... .......... .......... .......... .......... 57.9M 3800K .......... .......... .......... .......... .......... 148M 3850K .......... .......... .......... .......... .......... 82.6M 3900K .......... .......... .......... .......... .......... 70.1M 3950K .......... .......... .......... .......... .......... 104M 4000K .......... .......... .......... .......... .......... 1.07M 4050K .......... .......... .......... .......... .......... 787K 4100K .......... .......... .......... .......... .......... 82.5M 4150K .......... .......... .......... .......... .......... 95.2M 4200K .......... .......... .......... .......... .......... 55.2M 4250K .......... .......... .......... .......... .......... 139M 4300K .......... .......... .......... .......... .......... 107M 4350K .......... .......... .......... .......... .......... 1.07M 4400K .......... .......... .......... .......... .......... 787K 4450K .......... .......... .......... .......... .......... 85.8M 4500K .......... .......... .......... .......... .......... 80.0M 4550K .......... .......... .......... .......... .......... 94.1M 4600K .......... .......... .......... .......... .......... 83.6M 4650K .......... .......... .......... .......... .......... 109M 4700K .......... .......... .......... .......... .......... 1.07M 4750K .......... .......... .......... .......... .......... 789K 4800K .......... .......... .......... .......... .......... 84.5M 4850K .......... .......... .......... .......... .......... 47.6M 4900K .......... .......... .......... .......... .......... 80.4M 4950K .......... .......... .......... .......... .......... 113M 5000K .......... .......... .......... .......... .......... 119M 5050K .......... .......... .......... .......... .......... 1.07M 5100K .......... .......... .......... .......... .......... 789K 5150K .......... .......... .......... .......... .......... 111M 5200K .......... .......... .......... .......... .......... 41.6M 5250K .......... .......... .......... .......... .......... 81.1M 5300K .......... .......... .......... .......... .......... 96.5M 5350K .......... .......... .......... .......... .......... 108M 5400K .......... .......... .......... .......... .......... 100M 5450K .......... .......... .......... .......... .......... 453K 5500K .......... .......... .......... .......... .......... 81.1M 5550K .......... .......... .......... .......... .......... 76.4M 5600K .......... .......... .......... .......... .......... 89.9M 5650K .......... .......... .......... .......... .......... 147M 5700K .......... .......... .......... .......... .......... 150M 5750K .......... .......... .......... .......... .......... 99.8M 5800K .......... .......... .......... .......... .......... 459K 5850K .......... .......... .......... .......... .......... 76.7M 5900K .......... .......... .......... .......... .......... 92.0M 5950K .......... .......... .......... .......... .......... 88.8M 6000K .......... .......... .......... .......... .......... 92.1M 6050K .......... .......... .......... .......... .......... 87.0M 6100K .......... .......... .......... .......... .......... 164M 6150K .......... .......... .......... .......... .......... 460K 6200K .......... .......... .......... .......... .......... 76.8M 6250K .......... .......... .......... .......... .......... 80.7M 6300K .......... .......... .......... .......... .......... 93.9M 6350K .......... .......... .......... .......... .......... 143M 6400K .......... .......... .......... .......... .......... 166M 6450K .......... .......... .......... .......... .......... 80.0M 6500K .......... .......... .......... .......... .......... 1.11M 6550K .......... .......... .......... .......... .......... 763K 6600K 1183G=2.6s 2018-01-23 08:52:58 (2.50 MB/s) - '/home/peko/autobuild/instance-1/output/build/.systemd-236.tar.gz.tAy02n/output' saved [6759035] systemd-236.tar.gz: OK (sha256: 0cadccfa7109232ec2a469d41ca595d5595b83b648b534ea669c15dbca904c43) >>> systemd 236 Extracting gzip -d -c /home/peko/autobuild/instance-1/dl/systemd-236.tar.gz | tar --strip-components=1 -C /home/peko/autobuild/instance-1/output/build/systemd-236 -xf - >>> systemd 236 Patching Applying 0001-fix-getty-unit.patch using patch: patching file units/getty@.service.m4 Hunk #1 succeeded at 35 (offset 2 lines). patching file units/serial-getty@.service.m4 Hunk #1 succeeded at 33 (offset 2 lines). Applying 0002-install-don-t-use-ln-relative.patch using patch: patching file meson.build patching file tools/meson-make-symlink.sh patching file units/meson-add-wants.sh Applying 0003-fix-am-path-libgcrypt-no-found.patch using patch: patching file m4/libgcrypt.m4 Applying 0004-add-false-option-for-tests.patch using patch: patching file meson.build patching file meson_options.txt >>> systemd 236 Configuring rm -rf /home/peko/autobuild/instance-1/output/build/systemd-236/build mkdir -p /home/peko/autobuild/instance-1/output/build/systemd-236/build PATH="/home/peko/autobuild/instance-1/output/host/bin:/home/peko/autobuild/instance-1/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" meson --prefix=/usr --libdir='/usr/lib' --buildtype release --cross-file /home/peko/autobuild/instance-1/output/host/etc/meson/cross-compilation.conf -Drootlibdir='/usr/lib' -Dblkid=true -Dman=false -Dima=false -Dlibcryptsetup=false -Defi=false -Dgnu-efi=false -Dldconfig=false -Ddefault-dnssec=no -Dtests=false -Dtelinit-path=/home/peko/autobuild/instance-1/output/target/sbin/telinit -Dkill-path=/usr/bin/kill -Dkmod-path=/usr/bin/kmod -Dkexec-path=/usr/sbin/kexec -Dsulogin-path=/usr/sbin/sulogin -Dmount-path=/usr/bin/mount -Dumount-path=/usr/bin/umount -Dacl=true -Daudit=false -Dlibidn=false -Dseccomp=false -Dxkbcommon=true -Dbzip2=true -Dlz4=true -Dpam=true -Dxz=true -Dzlib=true -Dlibcurl=true -Dgcrypt=true -Dmicrohttpd=false -Dqrencode=false -Dselinux=true -Dhwdb=false -Dbinfmt=false -Dvconsole=false -Dquotacheck=false -Dtmpfiles=true -Dsysusers=false -Dfirstboot=false -Drandomseed=false -Dbacklight=false -Drfkill=false -Dlogind=false -Dmachined=true -Dimportd=true -Dhostnamed=false -Dmyhostname=false -Dtimedated=false -Dlocaled=false -Dcoredump=false -Dpolkit=false -Dnetworkd=false -Dresolved=false -Dtimesyncd=false -Dsmack=true -Dhibernate=false /home/peko/autobuild/instance-1/output/build/systemd-236 /home/peko/autobuild/instance-1/output/build/systemd-236/build The Meson build system Version: 0.44.0 Source dir: /home/peko/autobuild/instance-1/output/build/systemd-236 Build dir: /home/peko/autobuild/instance-1/output/build/systemd-236/build Build type: cross build Project name: systemd Native C compiler: ccache cc (gcc 6.3.0) Cross C compiler: /home/peko/autobuild/instance-1/output/host/bin/arm-none-linux-gnueabi-gcc (gcc 4.8.3) Host machine cpu family: arm Host machine cpu: arm920t Target machine cpu family: arm Target machine cpu: arm920t Build machine cpu family: x86_64 Build machine cpu: x86_64 Program tools/meson-check-compilation.sh found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/tools/meson-check-compilation.sh) Compiler for C supports argument -Wextra: YES Compiler for C supports argument -Werror=undef: YES Compiler for C supports argument -Wlogical-op: YES Compiler for C supports argument -Wmissing-include-dirs: YES Compiler for C supports argument -Wold-style-definition: YES Compiler for C supports argument -Wpointer-arith: YES Compiler for C supports argument -Winit-self: YES Compiler for C supports argument -Wdeclaration-after-statement: YES Compiler for C supports argument -Wfloat-equal: YES Compiler for C supports argument -Wsuggest-attribute=noreturn: YES Compiler for C supports argument -Werror=missing-prototypes: YES Compiler for C supports argument -Werror=implicit-function-declaration: YES Compiler for C supports argument -Werror=missing-declarations: YES Compiler for C supports argument -Werror=return-type: YES Compiler for C supports argument -Werror=incompatible-pointer-types: NO Compiler for C supports argument -Werror=format=2: YES Compiler for C supports argument -Wstrict-prototypes: YES Compiler for C supports argument -Wredundant-decls: YES Compiler for C supports argument -Wmissing-noreturn: YES Compiler for C supports argument -Wimplicit-fallthrough=5: NO Compiler for C supports argument -Wshadow: YES Compiler for C supports argument -Wendif-labels: YES Compiler for C supports argument -Wstrict-aliasing=2: YES Compiler for C supports argument -Wwrite-strings: YES Compiler for C supports argument -Werror=overflow: YES Compiler for C supports argument -Wdate-time: NO Compiler for C supports argument -Wnested-externs: YES Compiler for C supports argument -ffast-math: YES Compiler for C supports argument -fno-common: YES Compiler for C supports argument -fdiagnostics-show-option: YES Compiler for C supports argument -fno-strict-aliasing: YES Compiler for C supports argument -fvisibility=hidden: YES Compiler for C supports argument -fstack-protector: YES Compiler for C supports argument -fstack-protector-strong: NO Compiler for C supports argument -fPIE: YES Compiler for C supports argument --param=ssp-buffer-size=4: YES Compiler for C supports argument -Wunused-parameter: YES Compiler for C supports argument -Wmissing-field-initializers: YES Compiler for C supports argument -Wunused-result: YES Compiler for C supports argument -Wformat-signedness: NO Compiler for C supports argument -Werror=nonnull: YES Checking if "-Werror=shadow with local shadowing" compiles: YES Message: Linking with -Wl,-z,relro supported: yes Message: Linking with -Wl,-z,now supported: yes Message: Linking with -pie supported: yes Compiler for C supports argument -ffunction-sections: YES Compiler for C supports argument -fdata-sections: YES Message: Linking with -Wl,--gc-sections supported: yes Checking for size of "pid_t": 4 Checking for size of "uid_t": 4 Checking for size of "gid_t": 4 Checking for size of "dev_t": 8 Checking for size of "ino_t": 8 Checking for size of "time_t": 4 Checking for size of "rlim_t": 8 Checking for size of "char16_t": 2 Checking for size of "char32_t": 4 Checking for size of "key_serial_t": -1 Checking for size of "struct ethtool_link_settings": -1 Checking for size of "struct fib_rule_uid_range": -1 Header has symbol "IFLA_INET6_ADDR_GEN_MODE": NO Header has symbol "IN6_ADDR_GEN_MODE_STABLE_PRIVACY": NO Header has symbol "IFLA_VRF_TABLE": NO Header has symbol "IFLA_MACVLAN_FLAGS": YES Header has symbol "IFLA_IPVLAN_MODE": NO Header has symbol "IFLA_PHYS_PORT_ID": YES Header has symbol "IFLA_BOND_AD_INFO": NO Header has symbol "IFLA_VLAN_PROTOCOL": YES Header has symbol "IFLA_VXLAN_REMCSUM_NOPARTIAL": NO Header has symbol "IFLA_VXLAN_GPE": NO Header has symbol "IFLA_GENEVE_LABEL": NO Header has symbol "IFLA_VTI_REMOTE": NO Header has symbol "IFLA_IPTUN_ENCAP_DPORT": NO Header has symbol "IFLA_GRE_ENCAP_DPORT": NO Header has symbol "IFLA_BRIDGE_VLAN_INFO": NO Header has symbol "IFLA_BRPORT_PROXYARP": NO Header has symbol "IFLA_BRPORT_LEARNING_SYNC": NO Header has symbol "IFLA_BR_VLAN_DEFAULT_PVID": NO Header has symbol "NDA_IFINDEX": YES Header has symbol "IFA_FLAGS": NO Header has symbol "FRA_UID_RANGE": NO Header has symbol "LO_FLAGS_PARTSCAN": YES Header has symbol "VXCAN_INFO_PEER": NO Checking for function "secure_getenv": YES Checking for function "__secure_getenv": NO Checking for function "memfd_create": NO Checking for function "gettid": NO Checking for function "pivot_root": NO Checking for function "name_to_handle_at": YES Checking for function "setns": YES Checking for function "renameat2": NO Checking for function "kcmp": NO Checking for function "keyctl": NO Checking for function "copy_file_range": NO Checking for function "bpf": NO Checking for function "explicit_bzero": NO Checking for function "getrandom": NO Checking for function "getrandom": NO Program sed found: YES (/bin/sed) Program awk found: YES (/usr/bin/awk) Program m4 found: YES (/home/peko/autobuild/instance-1/output/host/bin/m4) Program stat found: YES (/usr/bin/stat) Program git found: YES (/usr/bin/git) Program test/test-efi-create-disk.sh found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/test/test-efi-create-disk.sh) Message: Using /home/peko/autobuild/instance-1/output/target/sbin/telinit for telinit Program quotaon found: NO Program /usr/sbin/quotaon found: NO Program /sbin/quotaon found: NO Program nonexistingprogram found: NO Program quotacheck found: NO Program /usr/sbin/quotacheck found: NO Program /sbin/quotacheck found: NO Program nonexistingprogram found: NO Message: Using /usr/bin/kill for kill Message: Using /usr/bin/kmod for kmod Message: Using /usr/sbin/kexec for kexec Message: Using /usr/sbin/sulogin for sulogin Message: Using /usr/bin/mount for mount Message: Using /usr/bin/umount for umount Program loadkeys found: YES (/usr/bin/loadkeys) Program setfont found: YES (/bin/setfont) Program gperf found: YES (/home/peko/autobuild/instance-1/output/host/bin/gperf) Message: gperf len type is size_t Has header "sys/capability.h": YES Has header "linux/btrfs.h": YES Has header "linux/memfd.h": NO Has header "linux/vm_sockets.h": NO Has header "sys/auxv.h": YES Has header "valgrind/memcheck.h": NO Has header "valgrind/valgrind.h": NO Message: maximum system UID is 999 Message: maximum system GID is 999 Message: WARNING: The local group with the GID 65534 does not match the configured group name "nobody" of the nobody group (its name is nogroup). Your build will result in an group table setup that is incompatible with the local system. Dependency threads found: YES Library rt found: YES Library m found: YES Library dl found: YES Library crypt found: YES Cross dependency libcap found: YES 2.25 Cross dependency mount found: YES 2.31.1 Cross dependency libselinux found: YES 2.7 Dependency libapparmor found: NO Library acl found: YES Cross dependency blkid found: YES 2.31.1 Cross dependency libkmod found: YES 24 Library pam found: YES Library pam_misc found: YES Cross dependency libcurl found: YES 7.57.0 Dependency libidn2 found: NO Dependency libiptc found: NO Library gcrypt found: YES Library gpg-error found: YES Dependency gnutls found: NO Dependency libdw found: NO Cross dependency zlib found: YES 1.2.11 Library bz2 found: YES Cross dependency liblzma found: YES 5.2.3 Cross dependency liblz4 found: YES 1.7.5 Cross dependency xkbcommon found: YES 0.7.1 Dependency glib-2.0 found: NO Dependency gobject-2.0 found: NO Dependency gio-2.0 found: NO Dependency dbus-1 found: NO Configuring config.h using configuration Program sh found: YES (/bin/sh) Program c++ found: YES (/usr/bin/c++) Program generate-gperfs.py found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/src/basic/generate-gperfs.py) Program generate-af-list.sh found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/src/basic/generate-af-list.sh) Program generate-arphrd-list.sh found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/src/basic/generate-arphrd-list.sh) Program generate-cap-list.sh found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/src/basic/generate-cap-list.sh) Program generate-errno-list.sh found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/src/basic/generate-errno-list.sh) Configuring libsystemd.pc using configuration Program generate-audit_type-list.sh found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/src/journal/generate-audit_type-list.sh) Program sh found: YES (/bin/sh) Configuring libudev.pc using configuration Configuring macros.systemd using configuration Configuring triggers.systemd using configuration Configuring systemd.pc using configuration Configuring org.freedesktop.systemd1.policy.in using configuration Program sh found: YES (/bin/sh) Program generate-keyboard-keys-list.sh found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/src/udev/generate-keyboard-keys-list.sh) Program generate-keyboard-keys-gperf.sh found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/src/udev/generate-keyboard-keys-gperf.sh) Configuring udev.pc using configuration Program sh found: YES (/bin/sh) Configuring journal-upload.conf using configuration Program sh found: YES (/bin/sh) Program generate-dns_type-gperf.py found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/src/resolve/generate-dns_type-gperf.py) Configuring resolved.conf using configuration Program generate-sym-test.py found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/src/test/generate-sym-test.py) Program test-systemd-tmpfiles.py found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/src/test/test-systemd-tmpfiles.py) Configuring 50-udev-default.rules using configuration Configuring 64-btrfs.rules using configuration Configuring 99-systemd.rules using configuration Program rule-syntax-check.py found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/test/rule-syntax-check.py) Program sysv-generator-test.py found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/test/sysv-generator-test.py) Program sys-script.py found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/test/sys-script.py) Program udev-test.pl found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/test/udev-test.pl) Program sh found: YES (/bin/sh) Program /home/peko/autobuild/instance-1/output/build/systemd-236/tools/meson-make-symlink.sh found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/tools/meson-make-symlink.sh) Message: Not compiling because tests is set to false Program tools/make-directive-index.py found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/tools/make-directive-index.py) Program tools/make-man-index.py found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/tools/make-man-index.py) Program tools/xml_helper.py found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/tools/xml_helper.py) Program tools/meson-hwdb-update.sh found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/tools/meson-hwdb-update.sh) Configuring console-getty.service.m4 using configuration Configuring container-getty@.service.m4 using configuration Configuring debug-shell.service.tmp using configuration Configuring emergency.service.tmp using configuration Configuring halt-local.service.tmp using configuration Configuring initrd-cleanup.service.tmp using configuration Configuring initrd-parse-etc.service.tmp using configuration Configuring initrd-switch-root.service.tmp using configuration Configuring initrd-udevadm-cleanup-db.service.tmp using configuration Configuring kmod-static-nodes.service.tmp using configuration Program meson-add-wants.sh found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/units/meson-add-wants.sh) Configuring quotaon.service.tmp using configuration Configuring rc-local.service.tmp using configuration Configuring rescue.service.tmp using configuration Configuring system-update-cleanup.service.tmp using configuration Configuring systemd-ask-password-console.service.tmp using configuration Configuring systemd-ask-password-wall.service.tmp using configuration Configuring systemd-backlight@.service.tmp using configuration Configuring systemd-binfmt.service.tmp using configuration Configuring systemd-coredump@.service.tmp using configuration Configuring systemd-exit.service.tmp using configuration Configuring systemd-firstboot.service.tmp using configuration Configuring systemd-fsck-root.service.tmp using configuration Configuring systemd-fsck@.service.tmp using configuration Configuring systemd-halt.service.tmp using configuration Configuring systemd-hibernate-resume@.service.tmp using configuration Configuring systemd-hibernate.service.tmp using configuration Configuring systemd-hybrid-sleep.service.tmp using configuration Configuring systemd-hostnamed.service.tmp using configuration Configuring systemd-hwdb-update.service.tmp using configuration Configuring systemd-importd.service.tmp using configuration Configuring systemd-initctl.service.tmp using configuration Configuring systemd-journal-catalog-update.service.tmp using configuration Configuring systemd-journal-flush.service.tmp using configuration Configuring systemd-journal-gatewayd.service.tmp using configuration Configuring systemd-journal-remote.service.tmp using configuration Configuring systemd-journal-upload.service.tmp using configuration Configuring systemd-journald.service.tmp using configuration Configuring systemd-kexec.service.tmp using configuration Configuring systemd-localed.service.tmp using configuration Configuring systemd-logind.service.tmp using configuration Configuring systemd-machine-id-commit.service.tmp using configuration Configuring systemd-machined.service.tmp using configuration Configuring systemd-modules-load.service.tmp using configuration Configuring systemd-networkd.service.tmp using configuration Configuring systemd-networkd-wait-online.service.tmp using configuration Configuring systemd-nspawn@.service.tmp using configuration Configuring systemd-poweroff.service.tmp using configuration Configuring systemd-quotacheck.service.tmp using configuration Configuring systemd-random-seed.service.tmp using configuration Configuring systemd-reboot.service.tmp using configuration Configuring systemd-remount-fs.service.tmp using configuration Configuring systemd-resolved.service.tmp using configuration Configuring systemd-rfkill.service.tmp using configuration Configuring systemd-suspend.service.tmp using configuration Configuring systemd-sysctl.service.tmp using configuration Configuring systemd-sysusers.service.tmp using configuration Configuring systemd-timedated.service.tmp using configuration Configuring systemd-timesyncd.service.tmp using configuration Configuring systemd-tmpfiles-clean.service.tmp using configuration Configuring systemd-tmpfiles-setup-dev.service.tmp using configuration Configuring systemd-tmpfiles-setup.service.tmp using configuration Configuring systemd-udev-settle.service.tmp using configuration Configuring systemd-udev-trigger.service.tmp using configuration Configuring systemd-udevd.service.tmp using configuration Configuring systemd-update-done.service.tmp using configuration Configuring systemd-update-utmp-runlevel.service.tmp using configuration Configuring systemd-update-utmp.service.tmp using configuration Configuring systemd-user-sessions.service.tmp using configuration Configuring systemd-vconsole-setup.service.tmp using configuration Configuring systemd-volatile-root.service.tmp using configuration Configuring user@.service.tmp using configuration Program /home/peko/autobuild/instance-1/output/build/systemd-236/tools/meson-make-symlink.sh found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/tools/meson-make-symlink.sh) Program sh found: YES (/bin/sh) Configuring systemd-exit.service using configuration Configuring systemd-tmpfiles-clean.service using configuration Configuring systemd-tmpfiles-setup.service using configuration Program sh found: YES (/bin/sh) Configuring basic.conf using configuration Program sh found: YES (/bin/sh) Program parse_hwdb.py found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/hwdb/parse_hwdb.py) Program xsltproc found: YES (/usr/bin/xsltproc) Configuring custom-entities.ent using configuration Message: Skipping binfmt.d.5 because ENABLE_BINFMT is false Message: Skipping bootctl.1 because ENABLE_EFI is false Message: Skipping coredump.conf.5 because ENABLE_COREDUMP is false Message: Skipping coredumpctl.1 because ENABLE_COREDUMP is false Message: Skipping crypttab.5 because HAVE_LIBCRYPTSETUP is false Message: Skipping hostnamectl.1 because ENABLE_HOSTNAMED is false Message: Skipping hwdb.7 because ENABLE_HWDB is false Message: Skipping journal-remote.conf.5 because HAVE_MICROHTTPD is false Message: Skipping journal-upload.conf.5 because HAVE_MICROHTTPD is false Message: Skipping localectl.1 because ENABLE_LOCALED is false Message: Skipping loginctl.1 because ENABLE_LOGIND is false Message: Skipping logind.conf.5 because ENABLE_LOGIND is false Message: Skipping networkctl.1 because ENABLE_NETWORKD is false Message: Skipping networkd.conf.5 because ENABLE_NETWORKD is false Message: Skipping nss-myhostname.8 because ENABLE_MYHOSTNAME is false Message: Skipping systemd-backlight@.service.8 because ENABLE_BACKLIGHT is false Message: Skipping systemd-binfmt.service.8 because ENABLE_BINFMT is false Message: Skipping systemd-coredump.8 because ENABLE_COREDUMP is false Message: Skipping systemd-cryptsetup-generator.8 because HAVE_LIBCRYPTSETUP is false Message: Skipping systemd-cryptsetup@.service.8 because HAVE_LIBCRYPTSETUP is false Message: Skipping systemd-firstboot.1 because ENABLE_FIRSTBOOT is false Message: Skipping systemd-hibernate-resume-generator.8 because ENABLE_HIBERNATE is false Message: Skipping systemd-hibernate-resume@.service.8 because ENABLE_HIBERNATE is false Message: Skipping systemd-hostnamed.service.8 because ENABLE_HOSTNAMED is false Message: Skipping systemd-hwdb.8 because ENABLE_HWDB is false Message: Skipping systemd-journal-gatewayd.service.8 because HAVE_MICROHTTPD is false Message: Skipping systemd-journal-remote.8 because HAVE_MICROHTTPD is false Message: Skipping systemd-journal-upload.8 because HAVE_MICROHTTPD is false Message: Skipping systemd-localed.service.8 because ENABLE_LOCALED is false Message: Skipping systemd-logind.service.8 because ENABLE_LOGIND is false Message: Skipping systemd-networkd-wait-online.service.8 because ENABLE_NETWORKD is false Message: Skipping systemd-networkd.service.8 because ENABLE_NETWORKD is false Message: Skipping systemd-quotacheck.service.8 because ENABLE_QUOTACHECK is false Message: Skipping systemd-random-seed.service.8 because ENABLE_RANDOMSEED is false Message: Skipping systemd-rfkill.service.8 because ENABLE_RFKILL is false Message: Skipping systemd-timedated.service.8 because ENABLE_TIMEDATED is false Message: Skipping systemd-timesyncd.service.8 because ENABLE_TIMESYNCD is false Message: Skipping systemd-vconsole-setup.service.8 because ENABLE_VCONSOLE is false Message: Skipping systemd-veritysetup-generator.8 because HAVE_LIBCRYPTSETUP is false Message: Skipping systemd-veritysetup@.service.8 because HAVE_LIBCRYPTSETUP is false Message: Skipping systemd.netdev.5 because ENABLE_NETWORKD is false Message: Skipping systemd.network.5 because ENABLE_NETWORKD is false Message: Skipping sysusers.d.5 because ENABLE_SYSUSERS is false Message: Skipping timedatectl.1 because ENABLE_TIMEDATED is false Message: Skipping timesyncd.conf.5 because ENABLE_TIMESYNCD is false Message: Skipping vconsole.conf.5 because ENABLE_VCONSOLE is false Message: python-lxml not available, not making man page indices Dependency bash-completion found: NO Message: bash completions: /usr/share/bash-completion/completions Configuring systemctl using configuration Message: zsh completions: /usr/share/zsh/site-functions Configuring _systemctl using configuration Configuring README using configuration Configuring README using configuration Program tools/meson-check-help.sh found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/tools/meson-check-help.sh) Program tools/meson-git-contrib.sh found: YES (/home/peko/autobuild/instance-1/output/build/systemd-236/tools/meson-git-contrib.sh) Message: systemd 236 prefix directory: /usr rootprefix directory: /usr sysconf directory: /etc include directory: /usr/include lib directory: /usr/lib rootlib directory: /usr/lib SysV init scripts: /etc/init.d SysV rc?.d directories: /etc/rc.d PAM modules directory: /usr/lib/security PAM configuration directory: /etc/pam.d RPM macros directory: /usr/lib/rpm/macros.d modprobe.d directory: /usr/lib/modprobe.d D-Bus policy directory: /usr/share/dbus-1/system.d D-Bus session directory: /usr/share/dbus-1/services D-Bus system directory: /usr/share/dbus-1/system-services bash completions directory: /usr/share/bash-completion/completions zsh completions directory: /usr/share/zsh/site-functions extra start script: /etc/rc.local extra stop script: /usr/sbin/halt.local debug shell: /bin/sh @ /dev/tty9 TTY GID: 5 users GID: - maximum system UID: 999 maximum system GID: 999 minimum dynamic UID: 61184 maximum dynamic UID: 65519 minimum container UID base: 524288 maximum container UID base: 1878982656 /dev/kvm access mode: 0666 render group access mode: 0666 certificate root directory: /etc/ssl support URL: https://lists.freedesktop.org/mailman/listinfo/systemd-devel nobody user name: nobody nobody group name: nobody fallback hostname: localhost symbolic gateway hostnames: _gateway default DNSSEC mode: no default cgroup hierarchy: hybrid default KillUserProcesses setting: true default DNS servers: 8.8.8.8 8.8.4.4 2001:4860:4860::8888 2001:4860:4860::8844 default NTP servers: time1.google.com time2.google.com time3.google.com time4.google.com time epoch: 1513289397 (2017-12-14T22:09:57+00:00) enabled features: PAM, SELinux, SMACK, zlib, xz, lz4, bzip2, ACL, gcrypt, libcurl, idn, nss-systemd, tmpfiles, environment.d, machined, importd, resolve, kmod, xkbcommon, blkid, tpm, SysV compat, utmp, adm group, wheel group, gshadow disabled features: libcryptsetup, AUDIT, IMA, AppArmor, SECCOMP, qrencode, microhttpd, gnutls, libidn2, libidn, libiptc, elfutils, binfmt, vconsole, quotacheck, sysusers, firstboot, randomseed, backlight, rfkill, logind, hostnamed, timedated, timesyncd, localed, networkd, coredump, polkit, legacy pkla, efi, gnu-efi, dbus, glib, nss-myhostname, hwdb, man pages, html pages, man page indices, split /usr, ldconfig, hibernate, debug hashmap, debug mmap cache Warning: You are using 'ANSI_X3.4-1968' which is not a Unicode-compatible locale. You might see errors if you use UTF-8 strings as filenames, as strings, or as file contents. Please switch to a UTF-8 locale for your platform. Build targets in project: 1053 Found ninja-1.8.2 at /home/peko/autobuild/instance-1/output/host/bin/ninja >>> systemd 236 Building PATH="/home/peko/autobuild/instance-1/output/host/bin:/home/peko/autobuild/instance-1/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" ninja -j6 -C /home/peko/autobuild/instance-1/output/build/systemd-236/build ninja: Entering directory `/home/peko/autobuild/instance-1/output/build/systemd-236/build' [1/1048] Generating systemd.de.catalog with a meson_exe.py custom command. FAILED: catalog/systemd.de.catalog /home/peko/autobuild/instance-1/output/host/bin/python3 /home/peko/autobuild/instance-1/output/host/bin/meson --internal exe /home/peko/autobuild/instance-1/output/build/systemd-236/build/meson-private/meson_exe_sed_5010237f2eeefcc0e23983ce0988b89afa9fba4b.dat Warning: You are using 'ANSI_X3.4-1968' which is not a Unicode-compatible locale. You might see errors if you use UTF-8 strings as filenames, as strings, or as file contents. Please switch to a UTF-8 locale for your platform. Traceback (most recent call last): File "/home/peko/autobuild/instance-1/output/host/bin/meson", line 4, in __import__('pkg_resources').run_script('meson==0.44.0', 'meson') File "build/bdist.linux-x86_64/egg/pkg_resources/__init__.py", line 750, in run_script File "build/bdist.linux-x86_64/egg/pkg_resources/__init__.py", line 1527, in run_script File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/EGG-INFO/scripts/meson", line 37, in sys.exit(main()) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/EGG-INFO/scripts/meson", line 34, in main return mesonmain.run(sys.argv[1:], launcher) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonmain.py", line 322, in run sys.exit(run_script_command(args[1:])) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonmain.py", line 278, in run_script_command return cmdfunc(cmdargs) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/scripts/meson_exe.py", line 76, in run return run_exe(exe) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/scripts/meson_exe.py", line 59, in run_exe p, stdout, stderr = Popen_safe(cmd + exe.cmd_args, env=child_env, cwd=exe.workdir) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonlib.py", line 642, in Popen_safe o, e = p.communicate(write) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 843, in communicate stdout, stderr = self._communicate(input, endtime, timeout) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 1554, in _communicate self.stdout.errors) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 740, in _translate_newlines data = data.decode(encoding, errors) UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 825: ordinal not in range(128) [2/1048] Generating systemd.be.catalog with a meson_exe.py custom command. FAILED: catalog/systemd.be.catalog /home/peko/autobuild/instance-1/output/host/bin/python3 /home/peko/autobuild/instance-1/output/host/bin/meson --internal exe /home/peko/autobuild/instance-1/output/build/systemd-236/build/meson-private/meson_exe_sed_f48bc088d4c3b5bce624fc0a6daf8304d1cdadd2.dat Warning: You are using 'ANSI_X3.4-1968' which is not a Unicode-compatible locale. You might see errors if you use UTF-8 strings as filenames, as strings, or as file contents. Please switch to a UTF-8 locale for your platform. Traceback (most recent call last): File "/home/peko/autobuild/instance-1/output/host/bin/meson", line 4, in __import__('pkg_resources').run_script('meson==0.44.0', 'meson') File "build/bdist.linux-x86_64/egg/pkg_resources/__init__.py", line 750, in run_script File "build/bdist.linux-x86_64/egg/pkg_resources/__init__.py", line 1527, in run_script File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/EGG-INFO/scripts/meson", line 37, in sys.exit(main()) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/EGG-INFO/scripts/meson", line 34, in main return mesonmain.run(sys.argv[1:], launcher) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonmain.py", line 322, in run sys.exit(run_script_command(args[1:])) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonmain.py", line 278, in run_script_command return cmdfunc(cmdargs) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/scripts/meson_exe.py", line 76, in run return run_exe(exe) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/scripts/meson_exe.py", line 59, in run_exe p, stdout, stderr = Popen_safe(cmd + exe.cmd_args, env=child_env, cwd=exe.workdir) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonlib.py", line 642, in Popen_safe o, e = p.communicate(write) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 843, in communicate stdout, stderr = self._communicate(input, endtime, timeout) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 1554, in _communicate self.stdout.errors) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 740, in _translate_newlines data = data.decode(encoding, errors) UnicodeDecodeError: 'ascii' codec can't decode byte 0xc5 in position 144: ordinal not in range(128) [3/1048] Generating systemd.be@latin.catalog with a meson_exe.py custom command. FAILED: catalog/systemd.be@latin.catalog /home/peko/autobuild/instance-1/output/host/bin/python3 /home/peko/autobuild/instance-1/output/host/bin/meson --internal exe /home/peko/autobuild/instance-1/output/build/systemd-236/build/meson-private/meson_exe_sed_b62574d9f5da642e59a1527d6bf173a7dc976bbb.dat Warning: You are using 'ANSI_X3.4-1968' which is not a Unicode-compatible locale. You might see errors if you use UTF-8 strings as filenames, as strings, or as file contents. Please switch to a UTF-8 locale for your platform. Traceback (most recent call last): File "/home/peko/autobuild/instance-1/output/host/bin/meson", line 4, in __import__('pkg_resources').run_script('meson==0.44.0', 'meson') File "build/bdist.linux-x86_64/egg/pkg_resources/__init__.py", line 750, in run_script File "build/bdist.linux-x86_64/egg/pkg_resources/__init__.py", line 1527, in run_script File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/EGG-INFO/scripts/meson", line 37, in sys.exit(main()) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/EGG-INFO/scripts/meson", line 34, in main return mesonmain.run(sys.argv[1:], launcher) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonmain.py", line 322, in run sys.exit(run_script_command(args[1:])) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonmain.py", line 278, in run_script_command return cmdfunc(cmdargs) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/scripts/meson_exe.py", line 76, in run return run_exe(exe) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/scripts/meson_exe.py", line 59, in run_exe p, stdout, stderr = Popen_safe(cmd + exe.cmd_args, env=child_env, cwd=exe.workdir) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonlib.py", line 642, in Popen_safe o, e = p.communicate(write) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 843, in communicate stdout, stderr = self._communicate(input, endtime, timeout) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 1554, in _communicate self.stdout.errors) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 740, in _translate_newlines data = data.decode(encoding, errors) UnicodeDecodeError: 'ascii' codec can't decode byte 0xc5 in position 144: ordinal not in range(128) [4/1048] Generating systemd.it.catalog with a meson_exe.py custom command. FAILED: catalog/systemd.it.catalog /home/peko/autobuild/instance-1/output/host/bin/python3 /home/peko/autobuild/instance-1/output/host/bin/meson --internal exe /home/peko/autobuild/instance-1/output/build/systemd-236/build/meson-private/meson_exe_sed_2a920314f459d20e00ea3702538fa0196b263a6f.dat Warning: You are using 'ANSI_X3.4-1968' which is not a Unicode-compatible locale. You might see errors if you use UTF-8 strings as filenames, as strings, or as file contents. Please switch to a UTF-8 locale for your platform. Traceback (most recent call last): File "/home/peko/autobuild/instance-1/output/host/bin/meson", line 4, in __import__('pkg_resources').run_script('meson==0.44.0', 'meson') File "build/bdist.linux-x86_64/egg/pkg_resources/__init__.py", line 750, in run_script File "build/bdist.linux-x86_64/egg/pkg_resources/__init__.py", line 1527, in run_script File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/EGG-INFO/scripts/meson", line 37, in sys.exit(main()) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/EGG-INFO/scripts/meson", line 34, in main return mesonmain.run(sys.argv[1:], launcher) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonmain.py", line 322, in run sys.exit(run_script_command(args[1:])) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonmain.py", line 278, in run_script_command return cmdfunc(cmdargs) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/scripts/meson_exe.py", line 76, in run return run_exe(exe) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/scripts/meson_exe.py", line 59, in run_exe p, stdout, stderr = Popen_safe(cmd + exe.cmd_args, env=child_env, cwd=exe.workdir) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonlib.py", line 642, in Popen_safe o, e = p.communicate(write) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 843, in communicate stdout, stderr = self._communicate(input, endtime, timeout) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 1554, in _communicate self.stdout.errors) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 740, in _translate_newlines data = data.decode(encoding, errors) UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 862: ordinal not in range(128) [5/1048] Generating systemd.fr.catalog with a meson_exe.py custom command. FAILED: catalog/systemd.fr.catalog /home/peko/autobuild/instance-1/output/host/bin/python3 /home/peko/autobuild/instance-1/output/host/bin/meson --internal exe /home/peko/autobuild/instance-1/output/build/systemd-236/build/meson-private/meson_exe_sed_90da6881d02bba8a8eed1715afce41e248f4a15f.dat Warning: You are using 'ANSI_X3.4-1968' which is not a Unicode-compatible locale. You might see errors if you use UTF-8 strings as filenames, as strings, or as file contents. Please switch to a UTF-8 locale for your platform. Traceback (most recent call last): File "/home/peko/autobuild/instance-1/output/host/bin/meson", line 4, in __import__('pkg_resources').run_script('meson==0.44.0', 'meson') File "build/bdist.linux-x86_64/egg/pkg_resources/__init__.py", line 750, in run_script File "build/bdist.linux-x86_64/egg/pkg_resources/__init__.py", line 1527, in run_script File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/EGG-INFO/scripts/meson", line 37, in sys.exit(main()) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/EGG-INFO/scripts/meson", line 34, in main return mesonmain.run(sys.argv[1:], launcher) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonmain.py", line 322, in run sys.exit(run_script_command(args[1:])) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonmain.py", line 278, in run_script_command return cmdfunc(cmdargs) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/scripts/meson_exe.py", line 76, in run return run_exe(exe) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/scripts/meson_exe.py", line 59, in run_exe p, stdout, stderr = Popen_safe(cmd + exe.cmd_args, env=child_env, cwd=exe.workdir) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonlib.py", line 642, in Popen_safe o, e = p.communicate(write) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 843, in communicate stdout, stderr = self._communicate(input, endtime, timeout) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 1554, in _communicate self.stdout.errors) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 740, in _translate_newlines data = data.decode(encoding, errors) UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 149: ordinal not in range(128) [6/1048] Generating systemd.bg.catalog with a meson_exe.py custom command. FAILED: catalog/systemd.bg.catalog /home/peko/autobuild/instance-1/output/host/bin/python3 /home/peko/autobuild/instance-1/output/host/bin/meson --internal exe /home/peko/autobuild/instance-1/output/build/systemd-236/build/meson-private/meson_exe_sed_f0a32f9c22213e042ac40e555efe464ed5ad7165.dat Warning: You are using 'ANSI_X3.4-1968' which is not a Unicode-compatible locale. You might see errors if you use UTF-8 strings as filenames, as strings, or as file contents. Please switch to a UTF-8 locale for your platform. Traceback (most recent call last): File "/home/peko/autobuild/instance-1/output/host/bin/meson", line 4, in __import__('pkg_resources').run_script('meson==0.44.0', 'meson') File "build/bdist.linux-x86_64/egg/pkg_resources/__init__.py", line 750, in run_script File "build/bdist.linux-x86_64/egg/pkg_resources/__init__.py", line 1527, in run_script File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/EGG-INFO/scripts/meson", line 37, in sys.exit(main()) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/EGG-INFO/scripts/meson", line 34, in main return mesonmain.run(sys.argv[1:], launcher) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonmain.py", line 322, in run sys.exit(run_script_command(args[1:])) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonmain.py", line 278, in run_script_command return cmdfunc(cmdargs) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/scripts/meson_exe.py", line 76, in run return run_exe(exe) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/scripts/meson_exe.py", line 59, in run_exe p, stdout, stderr = Popen_safe(cmd + exe.cmd_args, env=child_env, cwd=exe.workdir) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/site-packages/meson-0.44.0-py3.6.egg/mesonbuild/mesonlib.py", line 642, in Popen_safe o, e = p.communicate(write) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 843, in communicate stdout, stderr = self._communicate(input, endtime, timeout) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 1554, in _communicate self.stdout.errors) File "/home/peko/autobuild/instance-1/output/host/lib/python3.6/subprocess.py", line 740, in _translate_newlines data = data.decode(encoding, errors) UnicodeDecodeError: 'ascii' codec can't decode byte 0xd0 in position 1079: ordinal not in range(128) ninja: build stopped: subcommand failed. package/pkg-generic.mk:247: recipe for target '/home/peko/autobuild/instance-1/output/build/systemd-236/.stamp_built' failed make: *** [/home/peko/autobuild/instance-1/output/build/systemd-236/.stamp_built] Error 1 make: Leaving directory '/home/peko/autobuild/instance-1/buildroot'