>>> squid 6.2 Downloading wget --passive-ftp -nd -t 3 --no-check-certificate -O '/home/buildroot/autobuild/run/instance-0/output-1/build/.squid-6.2.tar.xz.IJIyEm/output' 'http://www.squid-cache.org/Versions/v6/squid-6.2.tar.xz' --2023-10-09 23:03:01-- http://www.squid-cache.org/Versions/v6/squid-6.2.tar.xz Resolving www.squid-cache.org (www.squid-cache.org)... 2001:4310:f1::70, 67.215.9.148, 212.199.163.170, ... Connecting to www.squid-cache.org (www.squid-cache.org)|2001:4310:f1::70|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 2546172 (2.4M) [application/octet-stream] Saving to: '/home/buildroot/autobuild/run/instance-0/output-1/build/.squid-6.2.tar.xz.IJIyEm/output' 0K .......... .......... .......... .......... .......... 2% 391K 6s 50K .......... .......... .......... .......... .......... 4% 171M 3s 100K .......... .......... .......... .......... .......... 6% 1.17M 3s 150K .......... .......... .......... .......... .......... 8% 387K 3s 200K .......... .......... .......... .......... .......... 10% 198M 3s 250K .......... .......... .......... .......... .......... 12% 1.07M 3s 300K .......... .......... .......... .......... .......... 14% 573K 3s 350K .......... .......... .......... .......... .......... 16% 1.09M 2s 400K .......... .......... .......... .......... .......... 18% 595K 3s 450K .......... .......... .......... .......... .......... 20% 109K 4s 500K .......... .......... .......... .......... .......... 22% 1.20M 4s 550K .......... .......... .......... .......... .......... 24% 1.19M 3s 600K .......... .......... .......... .......... .......... 26% 181M 3s 650K .......... .......... .......... .......... .......... 28% 566K 3s 700K .......... .......... .......... .......... .......... 30% 193M 3s 750K .......... .......... .......... .......... .......... 32% 1.20M 3s 800K .......... .......... .......... .......... .......... 34% 1.17M 2s 850K .......... .......... .......... .......... .......... 36% 1.24M 2s 900K .......... .......... .......... .......... .......... 38% 1.19M 2s 950K .......... .......... .......... .......... .......... 40% 1.19M 2s 1000K .......... .......... .......... .......... .......... 42% 1.18M 2s 1050K .......... .......... .......... .......... .......... 44% 12.5M 2s 1100K .......... .......... .......... .......... .......... 46% 1.18M 2s 1150K .......... .......... .......... .......... .......... 48% 1.20M 2s 1200K .......... .......... .......... .......... .......... 50% 1.19M 2s 1250K .......... .......... .......... .......... .......... 52% 612K 1s 1300K .......... .......... .......... .......... .......... 54% 202M 1s 1350K .......... .......... .......... .......... .......... 56% 1.20M 1s 1400K .......... .......... .......... .......... .......... 58% 608K 1s 1450K .......... .......... .......... .......... .......... 60% 1.17M 1s 1500K .......... .......... .......... .......... .......... 62% 606K 1s 1550K .......... .......... .......... .......... .......... 64% 1.18M 1s 1600K .......... .......... .......... .......... .......... 66% 79.1K 1s 1650K .......... .......... .......... .......... .......... 68% 576K 1s 1700K .......... .......... .......... .......... .......... 70% 563K 1s 1750K .......... .......... .......... .......... .......... 72% 569K 1s 1800K .......... .......... .......... .......... .......... 74% 1.13M 1s 1850K .......... .......... .......... .......... .......... 76% 588K 1s 1900K .......... .......... .......... .......... .......... 78% 1.13M 1s 1950K .......... .......... .......... .......... .......... 80% 387K 1s 2000K .......... .......... .......... .......... .......... 82% 174M 1s 2050K .......... .......... .......... .......... .......... 84% 585K 1s 2100K .......... .......... .......... .......... .......... 86% 562K 1s 2150K .......... .......... .......... .......... .......... 88% 1.15M 0s 2200K .......... .......... .......... .......... .......... 90% 563K 0s 2250K .......... .......... .......... .......... .......... 92% 1.15M 0s 2300K .......... .......... .......... .......... .......... 94% 577K 0s 2350K .......... .......... .......... .......... .......... 96% 1.11M 0s 2400K .......... .......... .......... .......... .......... 98% 500K 0s 2450K .......... .......... .......... ...... 100% 1.30M=3.7s 2023-10-09 23:03:05 (666 KB/s) - '/home/buildroot/autobuild/run/instance-0/output-1/build/.squid-6.2.tar.xz.IJIyEm/output' saved [2546172/2546172] squid-6.2.tar.xz: OK (md5: ad01b7d82b6a00ffd8cd39b97113d05a) squid-6.2.tar.xz: OK (sha1: 29ddb4c522a36f1270e7cfa66f0dec8805fd2b57) squid-6.2.tar.xz: OK (sha256: dd759e151e997d31786d91743d327b1b4b532f1caea66bf81100ec8ba04ec4c1) >>> squid 6.2 Extracting xzcat /home/buildroot/autobuild/run/instance-0/dl/squid/squid-6.2.tar.xz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2 -xf - >>> squid 6.2 Patching >>> squid 6.2 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2 -name $file); do cp support/gnuconfig/$file $i; done; done >>> squid 6.2 Patching libtool patching file /home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/cfgaux/ltmain.sh Hunk #1 succeeded at 2939 (offset 252 lines). Hunk #2 succeeded at 4532 (offset 255 lines). Hunk #3 succeeded at 6828 (offset 274 lines). Hunk #4 succeeded at 6838 (offset 274 lines). Hunk #5 succeeded at 7138 (offset 281 lines). Hunk #6 succeeded at 7442 (offset 293 lines). Hunk #7 succeeded at 8423 (offset 311 lines). Hunk #8 succeeded at 11058 (offset 348 lines). >>> squid 6.2 Configuring (cd /home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/ && rm -rf config.cache && PATH="/home/buildroot/autobuild/run/instance-0/output-1/host/bin:/home/buildroot/autobuild/run/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" AR="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ar" AS="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-as" LD="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-ld" NM="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-nm" CC="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc" GCC="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc" CPP="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-cpp" CXX="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++" FC="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gfortran" F77="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gfortran" RANLIB="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ranlib" READELF="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-readelf" STRIP="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-strip" OBJCOPY="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-objcopy" OBJDUMP="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/run/instance-0/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/run/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-0/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-as" DEFAULT_LINKER="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 " LDFLAGS="" FCFLAGS=" -Os -g0" FFLAGS=" -Os -g0" PKG_CONFIG="/home/buildroot/autobuild/run/instance-0/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/run/instance-0/output-1/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=no ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes ac_cv_epoll_works=yes ac_cv_func_setresuid=yes ac_cv_func_va_copy=yes ac_cv_func___va_copy=yes ac_cv_func_strnstr=no ac_cv_have_squid=yes BUILDCXX="/usr/bin/g++" BUILDCXXFLAGS="-O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include" LIBS=-latomic CONFIG_SITE=/dev/null ./configure --target=powerpc-buildroot-linux-uclibc --host=powerpc-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared --enable-async-io=8 --enable-linux-netfilter --enable-removal-policies="lru,heap" --with-filedescriptors=1024 --disable-ident-lookups --enable-auth-basic="fake getpwnam" --enable-auth-digest="file" --enable-auth-negotiate="wrapper" --enable-auth-ntlm="fake" --disable-strict-error-checking --enable-external-acl-helpers="file_userip" --disable-ltdl-install --without-included-ltdl --with-logdir=/var/log/squid/ --with-pidfile=/var/run/squid.pid --with-swapdir=/var/cache/squid/ --with-default-user=squid --without-mit-krb5 --with-openssl --with-gnutls --without-systemd ) checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for powerpc-buildroot-linux-uclibc-strip... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-strip checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether UID '1000' is supported by ustar format... yes checking whether GID '1000' is supported by ustar format... yes checking how to create a ustar tar archive... gnutar checking whether to enable maintainer-specific portions of Makefiles... no checking build system type... x86_64-pc-linux-gnu checking host system type... powerpc-buildroot-linux-uclibc checking simplified host os... linux (version ) checking for powerpc-buildroot-linux-uclibc-gcc... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc accepts -g... yes checking for /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc option to enable C11 features... none needed checking whether /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc... none checking whether the compiler supports GNU C++... yes checking whether /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ accepts -g... yes checking for /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ option to enable C++11 features... none needed checking dependency style of /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++... none checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no configure: CPU arch native optimization enabled: auto checking whether compiler accepts -march=native... no checking whether /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ supports C++17 features with -std=c++17... yes checking for powerpc-buildroot-linux-uclibc-ranlib... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ranlib checking how to run the C preprocessor... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-cpp checking whether ln -s works... yes checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for sh... /bin/sh checking for false... /bin/false checking for true... /bin/true checking for mv... /bin/mv checking for mkdir... /bin/mkdir checking for ln... /bin/ln checking for chmod... /bin/chmod checking for tr... /usr/bin/tr checking for rm... /bin/rm checking pkg-config is at least version 0.9.0... yes checking for perl... /usr/bin/perl checking for pod2man... /usr/bin/pod2man checking for ar... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ar checking for linuxdoc... /bin/false configure: strict error checking enabled: no checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-ld checking if the linker (/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-nm checking the name lister (/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-nm) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to powerpc-buildroot-linux-uclibc format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-ld option to reload object files... -r checking for powerpc-buildroot-linux-uclibc-file... no checking for file... file configure: WARNING: using cross tools not prefixed with host triplet checking for powerpc-buildroot-linux-uclibc-objdump... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-objdump checking how to recognize dependent libraries... pass_all checking for powerpc-buildroot-linux-uclibc-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for powerpc-buildroot-linux-uclibc-ar... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ar checking for archiver @FILE support... @ checking for powerpc-buildroot-linux-uclibc-strip... (cached) /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-strip checking for powerpc-buildroot-linux-uclibc-ranlib... (cached) /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ranlib checking command to parse /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-nm output from /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for powerpc-buildroot-linux-uclibc-mt... no checking for mt... mt checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc supports -fno-rtti -fno-exceptions... no checking for /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc option to produce PIC... -fPIC -DPIC checking if /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc PIC flag -fPIC -DPIC works... yes checking if /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc static flag -static works... yes checking if /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc supports -c -o file.o... yes checking if /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc supports -c -o file.o... (cached) yes checking whether the /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc linker (/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... yes checking whether a program can dlopen itself... cross checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking how to run the C++ preprocessor... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -E checking for ld used by /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-ld checking if the linker (/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-ld) is GNU ld... yes checking whether the /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 linker (/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-ld) supports shared libraries... yes checking for /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 option to produce PIC... -fPIC -DPIC checking if /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 PIC flag -fPIC -DPIC works... yes checking if /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 static flag -static works... yes checking if /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 supports -c -o file.o... yes checking if /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 supports -c -o file.o... (cached) yes checking whether the /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 linker (/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 options needed to detect all undeclared functions... none needed checking what extension is used for runtime loadable modules... .so checking what variable specifies run-time module search path... LD_LIBRARY_PATH checking for the default library search path... /lib /usr/lib /usr/local/lib /usr/local/lib/x86_64-linux-gnu /lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu /lib32 /usr/lib32 /libx32 /usr/libx32 checking for /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc options needed to detect all undeclared functions... none needed checking for library containing dlopen... none required checking for dlerror... yes checking for shl_load... (cached) no checking for shl_load in -ldld... (cached) no checking for dld_link in -ldld... no checking for _ prefix in compiled symbols... no checking whether deplibs are loaded by dlopen... yes checking for argz.h... no checking for error_t... no checking for argz_add... no checking for argz_append... no checking for argz_count... no checking for argz_create_sep... no checking for argz_insert... no checking for argz_next... no checking for argz_stringify... no checking whether libtool supports -dlopen/-dlpreopen... yes checking for ltdl.h... yes checking whether lt_dlinterface_register is declared... yes checking for lt_dladvise_preload in -lltdl... yes checking where to find libltdl headers... checking where to find libltdl library... -lltdl checking for unistd.h... (cached) yes checking for dl.h... no checking for sys/dl.h... no checking for dld.h... no checking for mach-o/dyld.h... no checking for dirent.h... yes checking for closedir... yes checking for opendir... yes checking for readdir... yes checking for strlcat... yes checking for strlcpy... yes checking for library containing dlopen... (cached) none required checking for dlerror... (cached) yes checking for shl_load... (cached) no checking for shl_load in -ldld... (cached) no checking for dld_link in -ldld... (cached) no checking whether to use loadable modules... yes checking what kind of compiler we're using... gcc checking for compiler variant... gcc checking compiler name-version... powerpc-linux-gcc.br_real-unknown checking whether compiler accepts -Wall... yes checking whether compiler accepts -Werror=extra... yes checking whether compiler accepts -Werror=no-unused-private-field... no checking whether compiler accepts -Werror=implicit-fallthrough=5... yes checking whether compiler accepts -Werror=pointer-arith... yes checking whether compiler accepts -Werror=write-strings... yes checking whether compiler accepts -Werror=comments... yes checking whether compiler accepts -Werror=shadow... yes checking whether compiler accepts -Werror=missing-declarations... yes checking whether compiler accepts -Werror=overloaded-virtual... yes checking whether compiler requires -Werror -Wno-deprecated-register... no configure: xmalloc stats display: no checking for dlopen in -ldl... yes checking whether linking without -latomic works... yes checking for library containing shm_open... none required configure: DiskIO modules built: AIO Blocking DiskDaemon DiskThreads IpcIo Mmapped checking for aio.h... no checking for aio_read in -lrt... no checking for aio_read in -laio... no configure: Native POSIX AIO support not detected. AIO automatically disabled. configure: AIO DiskIO Module disabled. Missing POSIX AIO support. configure: Enabling Blocking DiskIO module configure: Enabling DiskDaemon DiskIO module checking for pthread_create in -lpthread... yes configure: Enabling DiskThreads DiskIO module configure: Enabling IpcIo DiskIO module configure: Enabling Mmapped DiskIO module configure: IO Modules built: Blocking DiskDaemon DiskThreads IpcIo Mmapped configure: Store modules built: aufs diskd rock ufs configure: Removal policies to build: lru heap checking for LIBEXPAT... yes checking for expat.h... yes checking for LIBXML2... yes checking for libxml/parser.h... yes checking for libxml/HTMLparser.h... yes checking for libxml/HTMLtree.h... yes configure: Enabling ESI processor: -L/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib -lexpat -L/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib -lxml2 configure: Web Cache Coordination Protocol enabled: yes configure: Web Cache Coordination V2 Protocol enabled: yes configure: SNMP support enabled: yes checking for windows.h... no checking for sys/sockio.h... no checking for sys/param.h... yes checking for net/if_arp.h... yes checking for net/route.h... yes checking for net/if_dl.h... no checking for sys/sysctl.h... yes configure: EUI (MAC address) controls enabled: yes configure: HTCP support enabled: yes checking for LIBNETTLE... yes checking for nettle/base64.h... yes checking for nettle/md5.h... yes checking for nettle/base64.h... (cached) yes checking for Nettle 3.4 API compatibility... yes configure: Using Nettle cryptographic library: yes checking for crypt in -lcrypt... yes checking for MD5Init in -lmd5... no checking for LIBGNUTLS... yes checking for gnutls/gnutls.h... yes checking for gnutls/x509.h... yes checking for gnutls/abstract.h... yes configure: GnuTLS library support: yes -L/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib -lgnutls checking for openssl/asn1.h... yes checking for openssl/bio.h... yes checking for openssl/bn.h... yes checking for openssl/crypto.h... yes checking for openssl/decoder.h... yes checking for openssl/dh.h... yes checking for openssl/err.h... yes checking for openssl/evp.h... yes checking for openssl/lhash.h... yes checking for openssl/md5.h... yes checking for openssl/opensslv.h... yes checking for openssl/rsa.h... yes checking for openssl/ssl.h... yes checking for openssl/x509.h... yes checking for openssl/x509v3.h... yes checking for openssl/engine.h... yes checking for openssl/txt_db.h... yes checking for LIBOPENSSL... yes checking for OPENSSL_LH_strhash in -lcrypto... yes checking for EVP_PKEY_get0_RSA in -lcrypto... yes checking for BIO_meth_new in -lcrypto... yes checking for BIO_get_data in -lcrypto... yes checking for BIO_get_init in -lcrypto... yes checking for ASN1_STRING_get0_data in -lcrypto... yes checking for EVP_PKEY_up_ref in -lcrypto... yes checking for X509_STORE_CTX_get0_cert in -lcrypto... yes checking for X509_VERIFY_PARAM_get_depth in -lcrypto... yes checking for X509_STORE_CTX_get0_untrusted in -lcrypto... yes checking for X509_VERIFY_PARAM_set_auth_level in -lcrypto... yes checking for X509_up_ref in -lcrypto... yes checking for X509_chain_up_ref in -lcrypto... yes checking for X509_CRL_up_ref in -lcrypto... yes checking for DH_up_ref in -lcrypto... yes checking for X509_get0_signature in -lcrypto... yes checking for SSL_get0_param in -lcrypto... yes checking for OPENSSL_init_ssl in -lssl... yes checking for SSL_CIPHER_find in -lssl... yes checking for SSL_CTX_set_tmp_rsa_callback in -lssl... no checking for SSL_SESSION_get_id in -lssl... yes checking for SSL_get_client_random in -lssl... yes checking for SSL_SESSION_get_master_key in -lssl... yes checking for TLS_method in -lssl... yes checking for TLS_client_method in -lssl... yes checking for TLS_server_method in -lssl... yes checking for SSL_CTX_get0_certificate in -lssl... yes checking whether SSL_CTX_new and similar openSSL API functions require 'const SSL_METHOD *'"... yes checking whether SSL_get_new_ex_index() dup callback accepts 'const CRYPTO_EX_DATA *'"... no checking whether SSL_CTX_sess_set_get_cb() callback accepts a const ID argument"... yes checking "whether X509_get0_signature() accepts const parameters"... yes checking whether the TXT_DB use OPENSSL_PSTRING data member... yes checking whether the squid workaround for buggy versions of sk_OPENSSL_PSTRING_value should used... no checking whether the workaround for OpenSSL IMPLEMENT_LHASH_ macros should used... yes configure: OpenSSL library support: yes -L/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib -lssl -lcrypto checking for LIB_KRB5... no configure: Try to find Kerberos libraries in given path checking for main in -lresolv... yes checking for main in -lcrypt... yes checking for main in -lroken... no configure: WARNING: library 'roken' is required for Heimdal Kerberos checking for main in -lheimbase... no configure: WARNING: library 'heimbase' may be required for Heimdal Kerberos checking for main in -lwind... no configure: WARNING: library 'wind' may be required for Heimdal Kerberos checking for main in -lcrypto... yes checking for main in -lcom_err... no configure: WARNING: library 'com_err' is required for Heimdal Kerberos checking for main in -lhx509... no configure: WARNING: library 'hx509' may be required for Heimdal Kerberos checking for main in -lasn1... no configure: WARNING: library 'asn1' is required for Heimdal Kerberos checking for main in -lkrb5... no configure: WARNING: library 'krb5' is required for Heimdal Kerberos checking for main in -lheimntlm... no configure: WARNING: library 'heimntlm' may be required for Heimdal Kerberos checking for main in -lgssapi... no configure: WARNING: library 'gssapi' is required for Heimdal Kerberos configure: WARNING: Heimdal Kerberos library not found checking for LIB_KRB5... no configure: Try to find Kerberos libraries in given path checking for main in -lgss... no configure: WARNING: library 'com_err' is required for GNU Kerberos configure: WARNING: GNU GSS Kerberos library not found configure: Kerberos library support: no checking for LIBLDAP... no checking for ber_init in -llber... no checking for ldap_init in -lldap... no checking for ldap_init in -lldap60... no checking for prldap_init in -lprldap60... no checking for ldapssl_init in -lssldap60... no checking for ldap.h... no checking for lber.h... no checking for mozldap/ldap.h... no checking for LDAP... 0 checking for OpenLDAP... 0 checking for Sun LDAP SDK... 0 checking for Mozilla LDAP SDK... 0 checking for LDAP_OPT_DEBUG_LEVEL... 0 checking for LDAP_SCOPE_DEFAULT... 0 checking for LDAP_REBIND_PROC... 0 checking for LDAP_REBINDPROC_CALLBACK... 0 checking for LDAP_REBIND_FUNCTION... 0 checking for LDAP_URL_LUD_SCHEME... 0 checking for ldapssl_client_init in -lldap... no checking for library containing ldap_url_desc2str... no checking for library containing ldap_url_parse... no checking for library containing ldap_start_tls_s... no configure: Library ldap not found. configure: systemd library support: no configure: Forw/Via database enabled: no configure: Cache Digests enabled: no configure: enabling select syscall for net I/O: auto configure: enabling poll syscall for net I/O: auto checking for sys/event.h... no checking for kqueue... no configure: enabling kqueue for net I/O: no configure: enabling epoll syscall for net I/O: auto checking for library containing epoll_ctl... none required checking for sys/epoll.h... yes checking if epoll works... configure: enabling /dev/poll for net I/O: auto checking for ioctl... yes checking for write... yes checking for sys/devpoll.h... no configure: HTTP violations support enabled: yes configure: FreeBSD IPFW-based transparent proxying enabled: no configure: IPF-based transparent proxying requested: no configure: PF-based transparent proxying requested: no configure: NAT lookups via /dev/pf: no configure: Linux Netfilter support requested: yes configure: Linux Netfilter Conntrack support requested: auto checking for library containing nfct_query... no checking for libnetfilter_conntrack/libnetfilter_conntrack.h... no checking for libnetfilter_conntrack/libnetfilter_conntrack_tcp.h... no checking size of long... 4 configure: Support for X-Forwarded-For enabled: yes configure: Support for Ident lookups enabled: no configure: Default hosts file set to: /etc/hosts configure: Authentication support enabled: yes configure: checking auth/basic helpers: fake getpwnam checking for pwd.h... yes checking for crypt... yes checking for unistd.h... (cached) yes checking for crypt.h... yes checking for shadow.h... yes configure: auth/basic helpers to be built: fake getpwnam configure: checking auth/digest helpers: file configure: auth/digest helpers to be built: file configure: checking auth/negotiate helpers: wrapper checking for vfork... yes configure: auth/negotiate helpers to be built: wrapper configure: checking auth/ntlm helpers: fake configure: auth/ntlm helpers to be built: fake checking for machine/byte_swap.h... no checking for sys/bswap.h... no checking for endian.h... yes checking for sys/endian.h... no checking for bswap_16... no checking for bswap16... no checking for bswap_32... no checking for bswap32... no checking for htole16... no checking for __htole16... no checking for htole32... no checking for __htole32... no checking for le16toh... no checking for __le16toh... no checking for le32toh... no checking for __le32toh... no configure: checking log helpers: DB file configure: log helpers to be built: DB file configure: checking acl/external helpers: file_userip checking for sys/socket.h... yes configure: acl/external helpers to be built: file_userip configure: checking http/url_rewriters helpers: LFS fake configure: http/url_rewriters helpers to be built: LFS fake configure: checking security/cert_validators helpers: fake configure: security/cert_validators helpers to be built: fake configure: checking security/cert_generators helpers: file configure: security/cert_generators helpers to be built: file configure: checking store/id_rewriters helpers: file configure: store/id_rewriters helpers to be built: file configure: Valgrind debug support enabled: no configure: MS Windows service mode enabled: no configure: unlinkd enabled: yes configure: Automatically print stack trace on fatal errors: no configure: X-Accelerator-Vary support enabled: no checking for LIBCPPUNIT... no configure: WARNING: cppunit does not appear to be installed. Squid does not require this, but code testing with 'make check' will fail. checking for arpa/inet.h... yes checking for arpa/nameser.h... yes checking for assert.h... yes checking for bstring.h... no checking for crypt.h... (cached) yes checking for ctype.h... yes checking for direct.h... no checking for dirent.h... (cached) yes checking for errno.h... yes checking for execinfo.h... no checking for fcntl.h... yes checking for fnmatch.h... yes checking for getopt.h... yes checking for glob.h... yes checking for gnumalloc.h... no checking for grp.h... yes checking for ipl.h... no checking for libc.h... no checking for limits.h... yes checking for linux/posix_types.h... yes checking for linux/types.h... yes checking for malloc.h... yes checking for math.h... yes checking for memory.h... yes checking for mount.h... no checking for netdb.h... yes checking for netinet/in.h... yes checking for netinet/in_systm.h... yes checking for netinet/tcp.h... yes checking for paths.h... yes checking for poll.h... yes checking for priv.h... no checking for pwd.h... (cached) yes checking for regex.h... yes checking for sched.h... yes checking for siginfo.h... no checking for signal.h... yes checking for stdarg.h... yes checking for stddef.h... yes checking for stdio.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking for sys/bitypes.h... yes checking for sys/file.h... yes checking for sys/ioctl.h... yes checking for sys/ipc.cc... no checking for sys/param.h... (cached) yes checking for sys/prctl.h... yes checking for sys/procctl.h... no checking for sys/md5.h... no checking for sys/mman.h... yes checking for sys/msg.h... yes checking for sys/resource.h... yes checking for sys/select.h... yes checking for sys/shm.h... yes checking for sys/socket.h... (cached) yes checking for sys/stat.h... (cached) yes checking for syscall.h... yes checking for sys/syscall.h... yes checking for sys/time.h... yes checking for sys/types.h... (cached) yes checking for sys/uio.h... yes checking for sys/un.h... yes checking for sys/vfs.h... yes checking for sys/wait.h... yes checking for syslog.h... yes checking for time.h... yes checking for unistd.h... (cached) yes checking for utime.h... yes checking for varargs.h... no checking for byteswap.h... yes checking for glib.h... no checking for stdint.h... (cached) yes checking for inttypes.h... (cached) yes checking for wchar.h... (cached) yes checking for linux/netfilter_ipv4.h... yes checking for linux/netfilter_ipv6/ip6_tables.h... no checking for net/if.h... yes checking for netinet/if_ether.h... yes checking for netinet/icmp6.h... yes checking for netinet/in.h... (cached) yes checking for netinet/ip.h... yes checking for netinet/ip6.h... yes checking for netinet/ip_icmp.h... yes checking for netinet/ipl.h... no checking for net/pf/pfvar.h... no checking for net/pfvar.h... no checking for sys/mount.h... yes checking for resolv.h... yes checking for an ANSI C-conforming const... yes checking whether byte ordering is bigendian... (cached) yes checking for struct tm.tm_gmtoff... yes checking for struct rusage... yes checking for struct iphdr.ip_hl... yes checking size of void *... 4 checking for int8_t... yes checking for uint8_t... yes checking for int16_t... yes checking for uint16_t... yes checking for int32_t... yes checking for uint32_t... yes checking for int64_t... yes checking for uint64_t... yes checking for pid_t... yes checking for size_t... yes checking for ssize_t... yes checking for off_t... yes checking for uid_t in sys/types.h... yes checking for bool... yes checking size of int64_t... 8 checking size of long... (cached) 4 checking size of size_t... 4 checking size of off_t... 8 checking size of size_t... (cached) 4 checking for pad128_t... no checking for upad128_t... no checking for mode_t... yes checking for fd_mask... yes checking for socklen_t... yes checking for mtyp_t... no checking for cpu_set_t... yes checking for compiler %zu support... yes checking for working alloca.h... yes checking for alloca... yes checking for LIBCAP... yes checking for sys/capability.h... yes checking for operational libcap2 headers... yes configure: libcap headers are ok: yes configure: Linux capabilities support enabled: yes -L/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/lib -lcap checking for library containing gethostbyname... none required checking for library containing res_init... no checking for library containing __res_search... none required checking for library containing bind... none required checking for library containing opcom_stack_trace... no checking for library containing yp_match... no checking for unix domain sockets... yes checking for malloc in -lgnumalloc... no checking for main in -lmalloc... no checking for library containing log... none required configure: forcing default of 1024 filedescriptors (user-forced) checking Default FD_SETSIZE value... 256 checking for getrlimit... yes checking for setrlimit... yes checking Maximum number of filedescriptors we can open... configure: Default number of filedescriptors: 1024 checking whether to enable IPv6... yes checking for sin6_len field in struct sockaddr_in6... no checking for ss_len field in struct sockaddr_storage... no checking for sin_len field in struct sockaddr_in... no checking for backtrace_symbols_fd... no checking for bcopy... yes checking for eui64_aton... no checking for fchmod... yes checking for getdtablesize... yes checking for getpagesize... yes checking for getpass... yes checking for getrusage... yes checking for getspnam... yes checking for gettimeofday... yes checking for glob... yes checking for mallocblksize... no checking for mallopt... yes checking for memcpy... yes checking for memmove... yes checking for memrchr... yes checking for memset... yes checking for mkstemp... yes checking for mktime... yes checking for mstats... no checking for poll... yes checking for prctl... yes checking for procctl... no checking for pthread_attr_setschedparam... yes checking for pthread_attr_setscope... yes checking for pthread_setschedparam... yes checking for pthread_sigmask... yes checking for putenv... yes checking for regcomp... yes checking for regexec... yes checking for regfree... yes checking for res_init... no checking for __res_init... yes checking for rint... yes checking for sched_getaffinity... yes checking for sched_setaffinity... yes checking for select... yes checking for seteuid... yes checking for setgroups... yes checking for setpflags... no checking for setpgrp... yes checking for setsid... yes checking for sigaction... yes checking for snprintf... yes checking for socketpair... yes checking for sysconf... yes checking for syslog... yes checking for timegm... yes checking for vsnprintf... yes checking for initgroups... yes checking for psignal... yes checking for strerror... yes checking for strtoll... yes checking for tempnam... yes checking whether getaddrinfo is declared... yes checking whether getnameinfo is declared... yes checking whether inet_ntop is declared... yes checking whether inet_pton is declared... yes checking whether InetNtopA is declared... no checking whether InetPtonA is declared... no configure: Using poll for the IO loop. checking if setresuid is actually implemented... checking for mswsock.h... no checking for constant CMSG_SPACE... yes checking for struct cmsghdr... yes checking for struct iovec... yes checking for struct msghdr... yes checking for struct sockaddr_un... yes checking if strnstr is well implemented... configure: IPF-based transparent proxying enabled: no configure: Support for Netfilter-based interception proxy requested: yes configure: Linux Netfilter Conntrack support enabled: no configure: ZPH QOS enabled: yes checking for regexec in -lregex... no checking Default UDP send buffer size... 16384 checking Default UDP receive buffer size... 16384 checking Default TCP send buffer size... 16384 checking Default TCP receive buffer size... 16384 checking if sys_errlist is already defined... yes checking for system-provided MAXPATHLEN... yes checking for libresolv _dns_ttl_ hack... no checking for _res_ext.nsaddr_list... no checking for _res._u._ext.nsaddrs... no checking for _res.nsaddr_list... yes checking for _res.ns_list... no checking for sys/statvfs.h... yes checking for working statvfs() interface... yes configure: Multi-Language support enabled: yes configure: BUILD LIBRARIES: configure: BUILD EXTRA LIBRARIES: -ldl -latomic configure: BUILD OBJECTS: configure: BUILD EXTRA OBJECTS: configure: BUILD C FLAGS: -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 configure: BUILD EXTRA C FLAGS: -pipe -D_REENTRANT configure: BUILD C++ FLAGS: -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 configure: BUILD EXTRA C++ FLAGS: -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT configure: BUILD Tools C++ FLAGS: -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating compat/Makefile config.status: creating contrib/Makefile config.status: creating doc/Makefile config.status: creating doc/manuals/Makefile config.status: creating doc/release-notes/Makefile config.status: creating errors/Makefile config.status: creating icons/Makefile config.status: creating lib/Makefile config.status: creating lib/libTrie/Makefile config.status: creating lib/libTrie/test/Makefile config.status: creating lib/ntlmauth/Makefile config.status: creating lib/rfcnb/Makefile config.status: creating lib/smblib/Makefile config.status: creating lib/snmplib/Makefile config.status: creating scripts/Makefile config.status: creating src/Makefile config.status: creating src/acl/Makefile config.status: creating src/acl/external/Makefile config.status: creating src/acl/external/AD_group/Makefile config.status: creating src/acl/external/delayer/Makefile config.status: creating src/acl/external/eDirectory_userip/Makefile config.status: creating src/acl/external/file_userip/Makefile config.status: creating src/acl/external/kerberos_ldap_group/Makefile config.status: creating src/acl/external/kerberos_sid_group/Makefile config.status: creating src/acl/external/LDAP_group/Makefile config.status: creating src/acl/external/LM_group/Makefile config.status: creating src/acl/external/session/Makefile config.status: creating src/acl/external/SQL_session/Makefile config.status: creating src/acl/external/unix_group/Makefile config.status: creating src/acl/external/wbinfo_group/Makefile config.status: creating src/acl/external/time_quota/Makefile config.status: creating src/adaptation/Makefile config.status: creating src/adaptation/icap/Makefile config.status: creating src/adaptation/ecap/Makefile config.status: creating src/anyp/Makefile config.status: creating src/auth/Makefile config.status: creating src/auth/basic/Makefile config.status: creating src/auth/basic/DB/Makefile config.status: creating src/auth/basic/fake/Makefile config.status: creating src/auth/basic/getpwnam/Makefile config.status: creating src/auth/basic/LDAP/Makefile config.status: creating src/auth/basic/NCSA/Makefile config.status: creating src/auth/basic/NIS/Makefile config.status: creating src/auth/basic/PAM/Makefile config.status: creating src/auth/basic/POP3/Makefile config.status: creating src/auth/basic/RADIUS/Makefile config.status: creating src/auth/basic/SASL/Makefile config.status: creating src/auth/basic/SMB/Makefile config.status: creating src/auth/basic/SMB_LM/Makefile config.status: creating src/auth/basic/SSPI/Makefile config.status: creating src/auth/digest/Makefile config.status: creating src/auth/digest/eDirectory/Makefile config.status: creating src/auth/digest/file/Makefile config.status: creating src/auth/digest/LDAP/Makefile config.status: creating src/auth/negotiate/Makefile config.status: creating src/auth/negotiate/kerberos/Makefile config.status: creating src/auth/negotiate/SSPI/Makefile config.status: creating src/auth/negotiate/wrapper/Makefile config.status: creating src/auth/ntlm/Makefile config.status: creating src/auth/ntlm/fake/Makefile config.status: creating src/auth/ntlm/SMB_LM/Makefile config.status: creating src/auth/ntlm/SSPI/Makefile config.status: creating src/base/Makefile config.status: creating src/clients/Makefile config.status: creating src/comm/Makefile config.status: creating src/debug/Makefile config.status: creating src/dns/Makefile config.status: creating src/DiskIO/Makefile config.status: creating src/DiskIO/AIO/Makefile config.status: creating src/DiskIO/Blocking/Makefile config.status: creating src/DiskIO/DiskDaemon/Makefile config.status: creating src/DiskIO/DiskThreads/Makefile config.status: creating src/DiskIO/IpcIo/Makefile config.status: creating src/DiskIO/Mmapped/Makefile config.status: creating src/error/Makefile config.status: creating src/esi/Makefile config.status: creating src/eui/Makefile config.status: creating src/format/Makefile config.status: creating src/fs/Makefile config.status: creating src/ftp/Makefile config.status: creating src/helper/Makefile config.status: creating src/http/Makefile config.status: creating src/http/one/Makefile config.status: creating src/http/url_rewriters/Makefile config.status: creating src/http/url_rewriters/fake/Makefile config.status: creating src/http/url_rewriters/LFS/Makefile config.status: creating src/icmp/Makefile config.status: creating src/ident/Makefile config.status: creating src/ip/Makefile config.status: creating src/ipc/Makefile config.status: creating src/log/Makefile config.status: creating src/log/DB/Makefile config.status: creating src/log/file/Makefile config.status: creating src/mem/Makefile config.status: creating src/mgr/Makefile config.status: creating src/parser/Makefile config.status: creating src/proxyp/Makefile config.status: creating src/repl/Makefile config.status: creating src/sbuf/Makefile config.status: creating src/security/Makefile config.status: creating src/security/cert_generators/Makefile config.status: creating src/security/cert_generators/file/Makefile config.status: creating src/security/cert_validators/Makefile config.status: creating src/security/cert_validators/fake/Makefile config.status: creating src/servers/Makefile config.status: creating src/snmp/Makefile config.status: creating src/ssl/Makefile config.status: creating src/store/Makefile config.status: creating src/store/id_rewriters/Makefile config.status: creating src/store/id_rewriters/file/Makefile config.status: creating src/time/Makefile config.status: creating test-suite/Makefile config.status: creating tools/Makefile config.status: creating tools/apparmor/Makefile config.status: creating tools/helper-mux/Makefile config.status: creating tools/purge/Makefile config.status: creating tools/squidclient/Makefile config.status: creating tools/systemd/Makefile config.status: creating tools/sysvinit/Makefile config.status: creating include/autoconf.h config.status: executing depfiles commands config.status: executing libtool commands === configuring in libltdl (/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/libltdl) configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr' '--target=powerpc-buildroot-linux-uclibc' '--host=powerpc-buildroot-linux-uclibc' '--build=x86_64-pc-linux-gnu' '--exec-prefix=/usr' '--sysconfdir=/etc' '--localstatedir=/var' '--program-prefix=' '--disable-gtk-doc' '--disable-gtk-doc-html' '--disable-doc' '--disable-docs' '--disable-documentation' '--with-xmlto=no' '--with-fop=no' '--disable-dependency-tracking' '--enable-ipv6' '--disable-nls' '--disable-static' '--enable-shared' '--enable-async-io=8' '--enable-linux-netfilter' '--enable-removal-policies=lru,heap' '--with-filedescriptors=1024' '--disable-ident-lookups' '--enable-auth-basic=fake getpwnam' '--enable-auth-digest=file' '--enable-auth-negotiate=wrapper' '--enable-auth-ntlm=fake' '--disable-strict-error-checking' '--enable-external-acl-helpers=file_userip' '--disable-ltdl-install' '--without-included-ltdl' '--with-logdir=/var/log/squid/' '--with-pidfile=/var/run/squid.pid' '--with-swapdir=/var/cache/squid/' '--with-default-user=squid' '--without-mit-krb5' '--with-openssl' '--with-gnutls' '--without-systemd' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=powerpc-buildroot-linux-uclibc' 'target_alias=powerpc-buildroot-linux-uclibc' 'CC=/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc' 'CFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 ' 'LDFLAGS=' 'LIBS=-latomic' 'CPPFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' 'CXX=/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++' 'CXXFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 ' 'BUILDCXX=/usr/bin/g++' 'CPP=/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-cpp' 'PKG_CONFIG=/home/buildroot/autobuild/run/instance-0/output-1/host/bin/pkg-config' 'BUILDCXXFLAGS=-O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include' --cache-file=/dev/null --srcdir=. checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for powerpc-buildroot-linux-uclibc-strip... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-strip checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking build system type... x86_64-pc-linux-gnu checking host system type... powerpc-buildroot-linux-uclibc checking how to print strings... printf checking whether make supports the include directive... yes (GNU style) checking for powerpc-buildroot-linux-uclibc-gcc... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc accepts -g... yes checking for /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc option to enable C11 features... none needed checking whether /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc understands -c and -o together... yes checking dependency style of /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc... none checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-ld checking if the linker (/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-nm checking the name lister (/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to powerpc-buildroot-linux-uclibc format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-ld option to reload object files... -r checking for powerpc-buildroot-linux-uclibc-file... no checking for file... file configure: WARNING: using cross tools not prefixed with host triplet checking for powerpc-buildroot-linux-uclibc-objdump... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-objdump checking how to recognize dependent libraries... pass_all checking for powerpc-buildroot-linux-uclibc-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for powerpc-buildroot-linux-uclibc-ar... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ar checking for archiver @FILE support... @ checking for powerpc-buildroot-linux-uclibc-strip... (cached) /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-strip checking for powerpc-buildroot-linux-uclibc-ranlib... /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ranlib checking command to parse /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-nm output from /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for powerpc-buildroot-linux-uclibc-mt... no checking for mt... mt checking if mt is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc supports -fno-rtti -fno-exceptions... no checking for /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc option to produce PIC... -fPIC -DPIC checking if /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc PIC flag -fPIC -DPIC works... yes checking if /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc static flag -static works... yes checking if /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc supports -c -o file.o... yes checking if /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc supports -c -o file.o... (cached) yes checking whether the /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc linker (/home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... yes checking whether a program can dlopen itself... cross checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking what extension is used for runtime loadable modules... .so checking what variable specifies run-time module search path... LD_LIBRARY_PATH checking for the default library search path... /lib /usr/lib /usr/local/lib /usr/local/lib/x86_64-linux-gnu /lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu /lib32 /usr/lib32 /libx32 /usr/libx32 checking for /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc options needed to detect all undeclared functions... none needed checking for library containing dlopen... none required checking for dlerror... yes checking for shl_load... (cached) no checking for shl_load in -ldld... (cached) no checking for dld_link in -ldld... no checking for _ prefix in compiled symbols... no checking whether deplibs are loaded by dlopen... yes checking for argz.h... no checking for error_t... no checking for argz_add... no checking for argz_append... no checking for argz_count... no checking for argz_create_sep... no checking for argz_insert... no checking for argz_next... no checking for argz_stringify... no checking whether libtool supports -dlopen/-dlpreopen... yes checking for unistd.h... (cached) yes checking for dl.h... no checking for sys/dl.h... no checking for dld.h... no checking for mach-o/dyld.h... no checking for dirent.h... yes checking for closedir... yes checking for opendir... yes checking for readdir... yes checking for strlcat... yes checking for strlcpy... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands >>> squid 6.2 Building PATH="/home/buildroot/autobuild/run/instance-0/output-1/host/bin:/home/buildroot/autobuild/run/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" /usr/bin/make -j4 -C /home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/ make[1]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2' Making all in compat make[2]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/compat' /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o assert.lo assert.cc /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o compat.lo compat.cc /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o debug.lo debug.cc /bin/sh ../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o eui64_aton.lo eui64_aton.c libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c compat.cc -fPIC -DPIC -o .libs/compat.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c assert.cc -fPIC -DPIC -o .libs/assert.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c eui64_aton.c -fPIC -DPIC -o .libs/eui64_aton.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c debug.cc -fPIC -DPIC -o .libs/debug.o /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o getaddrinfo.lo getaddrinfo.cc /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o getnameinfo.lo getnameinfo.cc /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o inet_ntop.lo inet_ntop.cc /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o inet_pton.lo inet_pton.cc libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c getnameinfo.cc -fPIC -DPIC -o .libs/getnameinfo.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c getaddrinfo.cc -fPIC -DPIC -o .libs/getaddrinfo.o /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o memrchr.lo memrchr.cc libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c inet_pton.cc -fPIC -DPIC -o .libs/inet_pton.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c inet_ntop.cc -fPIC -DPIC -o .libs/inet_ntop.o /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o mswindows.lo mswindows.cc /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o shm.lo shm.cc libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c memrchr.cc -fPIC -DPIC -o .libs/memrchr.o /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o statvfs.lo statvfs.cc libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c mswindows.cc -fPIC -DPIC -o .libs/mswindows.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c statvfs.cc -fPIC -DPIC -o .libs/statvfs.o /bin/sh ../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o strnrchr.lo strnrchr.c /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o strnstr.lo strnstr.cc libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c shm.cc -fPIC -DPIC -o .libs/shm.o /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o xalloc.lo xalloc.cc libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c strnrchr.c -fPIC -DPIC -o .libs/strnrchr.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c strnstr.cc -fPIC -DPIC -o .libs/strnstr.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c xalloc.cc -fPIC -DPIC -o .libs/xalloc.o /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o xstrerror.lo xstrerror.cc /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o xstring.lo xstring.cc /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o xstrto.lo xstrto.cc libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c xstrerror.cc -fPIC -DPIC -o .libs/xstrerror.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c xstring.cc -fPIC -DPIC -o .libs/xstring.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c xstrto.cc -fPIC -DPIC -o .libs/xstrto.o /bin/sh ../libtool --tag=CXX --mode=link /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -g -o libcompatsquid.la assert.lo compat.lo debug.lo eui64_aton.lo getaddrinfo.lo getnameinfo.lo inet_ntop.lo inet_pton.lo memrchr.lo mswindows.lo shm.lo statvfs.lo strnrchr.lo strnstr.lo xalloc.lo xstrerror.lo xstring.lo xstrto.lo libtool: warning: library '/home/buildroot/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc-buildroot-linux-uclibc/12.3.0/../../../../powerpc-buildroot-linux-uclibc/lib/libstdc++.la' was moved. libtool: link: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ar cr .libs/libcompatsquid.a .libs/assert.o .libs/compat.o .libs/debug.o .libs/eui64_aton.o .libs/getaddrinfo.o .libs/getnameinfo.o .libs/inet_ntop.o .libs/inet_pton.o .libs/memrchr.o .libs/mswindows.o .libs/shm.o .libs/statvfs.o .libs/strnrchr.o .libs/strnstr.o .libs/xalloc.o .libs/xstrerror.o .libs/xstring.o .libs/xstrto.o libtool: link: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ranlib .libs/libcompatsquid.a libtool: link: ( cd ".libs" && rm -f "libcompatsquid.la" && ln -s "../libcompatsquid.la" "libcompatsquid.la" ) make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/compat' Making all in lib make[2]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/lib' Making all in libTrie make[3]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/lib/libTrie' Making all in . make[4]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/lib/libTrie' /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I../.. -I../../include -I../../lib -I../../src -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o Trie.o Trie.cc /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I../.. -I../../include -I../../lib -I../../src -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o TrieNode.o TrieNode.cc rm -f libTrie.a /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ar cru libTrie.a Trie.o TrieNode.o /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ranlib libTrie.a make[4]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/lib/libTrie' Making all in test make[4]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/lib/libTrie/test' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/lib/libTrie/test' make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/lib/libTrie' Making all in snmplib make[3]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/lib/snmplib' /bin/sh ../../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o asn1.lo asn1.c /bin/sh ../../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o coexistance.lo coexistance.c /bin/sh ../../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o mib.lo mib.c /bin/sh ../../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o parse.lo parse.c libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c mib.c -fPIC -DPIC -o .libs/mib.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c asn1.c -fPIC -DPIC -o .libs/asn1.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c parse.c -fPIC -DPIC -o .libs/parse.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c coexistance.c -fPIC -DPIC -o .libs/coexistance.o /bin/sh ../../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o snmp_api.lo snmp_api.c /bin/sh ../../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o snmp_api_error.lo snmp_api_error.c /bin/sh ../../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o snmp_error.lo snmp_error.c libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c snmp_api.c -fPIC -DPIC -o .libs/snmp_api.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c snmp_error.c -fPIC -DPIC -o .libs/snmp_error.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c snmp_api_error.c -fPIC -DPIC -o .libs/snmp_api_error.o /bin/sh ../../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o snmp_msg.lo snmp_msg.c /bin/sh ../../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o snmp_pdu.lo snmp_pdu.c /bin/sh ../../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o snmp_vars.lo snmp_vars.c /bin/sh ../../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o snmplib_debug.lo snmplib_debug.c libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c snmp_msg.c -fPIC -DPIC -o .libs/snmp_msg.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c snmp_pdu.c -fPIC -DPIC -o .libs/snmp_pdu.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c snmp_vars.c -fPIC -DPIC -o .libs/snmp_vars.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DSQUID_SNMP=1 -I../.. -I../../include -I../../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c snmplib_debug.c -fPIC -DPIC -o .libs/snmplib_debug.o /bin/sh ../../libtool --tag=CC --mode=link /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -g -o libsnmplib.la asn1.lo coexistance.lo mib.lo parse.lo snmp_api.lo snmp_api_error.lo snmp_error.lo snmp_msg.lo snmp_pdu.lo snmp_vars.lo snmplib_debug.lo libtool: link: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ar cr .libs/libsnmplib.a .libs/asn1.o .libs/coexistance.o .libs/mib.o .libs/parse.o .libs/snmp_api.o .libs/snmp_api_error.o .libs/snmp_error.o .libs/snmp_msg.o .libs/snmp_pdu.o .libs/snmp_vars.o .libs/snmplib_debug.o libtool: link: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ranlib .libs/libsnmplib.a libtool: link: ( cd ".libs" && rm -f "libsnmplib.la" && ln -s "../libsnmplib.la" "libsnmplib.la" ) make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/lib/snmplib' Making all in ntlmauth make[3]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/lib/ntlmauth' /bin/sh ../../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I../.. -I../../include -I../../lib -I../../src -I../../include -I../../lib -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o ntlmauth.lo ntlmauth.cc libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I../.. -I../../include -I../../lib -I../../src -I../../include -I../../lib -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c ntlmauth.cc -fPIC -DPIC -o .libs/ntlmauth.o /bin/sh ../../libtool --tag=CXX --mode=link /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -g -o libntlmauth.la ntlmauth.lo libtool: warning: library '/home/buildroot/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc-buildroot-linux-uclibc/12.3.0/../../../../powerpc-buildroot-linux-uclibc/lib/libstdc++.la' was moved. libtool: link: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ar cr .libs/libntlmauth.a .libs/ntlmauth.o libtool: link: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ranlib .libs/libntlmauth.a libtool: link: ( cd ".libs" && rm -f "libntlmauth.la" && ln -s "../libntlmauth.la" "libntlmauth.la" ) make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/lib/ntlmauth' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/lib' /bin/sh ../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o base64.lo base64.c /bin/sh ../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o html_quote.lo html_quote.c /bin/sh ../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o md5.lo md5.c /bin/sh ../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o rfc1738.lo rfc1738.c libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c base64.c -fPIC -DPIC -o .libs/base64.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c rfc1738.c -fPIC -DPIC -o .libs/rfc1738.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c md5.c -fPIC -DPIC -o .libs/md5.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c html_quote.c -fPIC -DPIC -o .libs/html_quote.o /bin/sh ../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o rfc2617.lo rfc2617.c /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o hash.lo hash.cc /bin/sh ../libtool --tag=CXX --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o Splay.lo Splay.cc libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c rfc2617.c -fPIC -DPIC -o .libs/rfc2617.o /bin/sh ../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o getfullhostname.lo getfullhostname.c libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c hash.cc -fPIC -DPIC -o .libs/hash.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c getfullhostname.c -fPIC -DPIC -o .libs/getfullhostname.o /bin/sh ../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o heap.lo heap.c libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c Splay.cc -fPIC -DPIC -o .libs/Splay.o /bin/sh ../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o radix.lo radix.c libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c heap.c -fPIC -DPIC -o .libs/heap.o libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c radix.c -fPIC -DPIC -o .libs/radix.o /bin/sh ../libtool --tag=CC --mode=compile /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c -o util.lo util.c /bin/sh ../libtool --tag=CC --mode=link /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -g -o libmiscencoding.la base64.lo html_quote.lo md5.lo rfc1738.lo rfc2617.lo /bin/sh ../libtool --tag=CXX --mode=link /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -g -o libmisccontainers.la hash.lo libtool: compile: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid.conf\" -DDEFAULT_SQUID_DATA_DIR=\"/usr/share\" -DDEFAULT_SQUID_CONFIG_DIR=\"/etc\" -I.. -I../include -I../lib -I../src -I../include -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/libxml2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -c util.c -fPIC -DPIC -o .libs/util.o libtool: link: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ar cr .libs/libmiscencoding.a .libs/base64.o .libs/html_quote.o .libs/md5.o .libs/rfc1738.o .libs/rfc2617.o libtool: link: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ranlib .libs/libmiscencoding.a libtool: warning: library '/home/buildroot/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc-buildroot-linux-uclibc/12.3.0/../../../../powerpc-buildroot-linux-uclibc/lib/libstdc++.la' was moved. libtool: link: ( cd ".libs" && rm -f "libmiscencoding.la" && ln -s "../libmiscencoding.la" "libmiscencoding.la" ) /bin/sh ../libtool --tag=CXX --mode=link /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-g++ -std=c++17 -Wall -Wextra -Wimplicit-fallthrough=5 -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Wmissing-declarations -Woverloaded-virtual -pipe -D_REENTRANT -I/home/buildroot/autobuild/run/instance-0/output-1/host/bin/../powerpc-buildroot-linux-uclibc/sysroot/usr/include/p11-kit-1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -g -o libmiscutil.la Splay.lo getfullhostname.lo heap.lo radix.lo util.lo libtool: link: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ar cr .libs/libmisccontainers.a .libs/hash.o libtool: link: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ranlib .libs/libmisccontainers.a libtool: link: ( cd ".libs" && rm -f "libmisccontainers.la" && ln -s "../libmisccontainers.la" "libmisccontainers.la" ) libtool: warning: library '/home/buildroot/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc-buildroot-linux-uclibc/12.3.0/../../../../powerpc-buildroot-linux-uclibc/lib/libstdc++.la' was moved. libtool: link: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ar cr .libs/libmiscutil.a .libs/Splay.o .libs/getfullhostname.o .libs/heap.o .libs/radix.o .libs/util.o libtool: link: /home/buildroot/autobuild/run/instance-0/output-1/host/bin/powerpc-linux-gcc-ranlib .libs/libmiscutil.a libtool: link: ( cd ".libs" && rm -f "libmiscutil.la" && ln -s "../libmiscutil.la" "libmiscutil.la" ) make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/lib' make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/lib' Making all in libltdl make[2]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/libltdl' GEN libltdl/lt__argz.h /usr/bin/make all-am make[3]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/libltdl' CC libltdlc_la-lt__alloc.lo CC libltdlc_la-lt_dlloader.lo CC libltdlc_la-ltdl.lo CC libltdlc_la-lt_error.lo CC libltdlc_la-slist.lo CC lt__argz.lo CC loaders/dlopen.lo CC loaders/libltdlc_la-preopen.lo CCLD dlopen.la CCLD libltdlc.la make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/libltdl' make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/libltdl' Making all in scripts make[2]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/scripts' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/scripts' Making all in icons make[2]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/icons' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/icons' Making all in errors make[2]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/errors' case "off" in \ off) \ echo "WARNING: Translation is disabled."; \ ;; \ ""|no) \ echo "WARNING: Translation toolkit was not detected."; \ ;; \ esac; \ touch translate-warn WARNING: Translation is disabled. make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/errors' Making all in doc make[2]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/doc' Making all in manuals make[3]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/doc/manuals' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/doc/manuals' Making all in release-notes make[3]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/doc/release-notes' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/doc/release-notes' make[3]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/doc' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/doc' make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/doc' Making all in src make[2]: Entering directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/src' gawk -f ./cf_gen_defines <./cf.data.pre >cf_gen_defines.cci || (/bin/rm -f -f cf_gen_defines.cci && exit 1) sed \ -e "s%[@]DEFAULT_HTTP_PORT[@]%3128%g" \ -e "s%[@]DEFAULT_ICP_PORT[@]%3130%g" \ -e "s%[@]DEFAULT_CACHE_EFFECTIVE_USER[@]%squid%g" \ -e "s%[@]DEFAULT_MIME_TABLE[@]%/etc/mime.conf%g" \ -e "s%[@]DEFAULT_SSL_CRTD[@]%/usr/libexec/`echo security_file_certgen | sed 's&^&&;s/$//'`%g" \ -e "s%[@]DEFAULT_UNLINKD[@]%/usr/libexec/`echo unlinkd | sed 's&^&&;s/$//'`%g" \ -e "s%[@]DEFAULT_PINGER[@]%/usr/libexec/`echo pinger | sed 's&^&&;s/$//'`%g" \ -e "s%[@]DEFAULT_DISKD[@]%/usr/libexec/`echo diskd | sed 's&^&&;s/$//'`%g" \ -e "s%[@]DEFAULT_LOGFILED[@]%/usr/libexec/`echo log_file_daemon | sed 's&^&&;s/$//'`%g;" \ -e "s%[@]DEFAULT_CACHE_LOG[@]%/var/log/squid//cache.log%g" \ -e "s%[@]DEFAULT_ACCESS_LOG[@]%/var/log/squid//access.log%g" \ -e "s%[@]DEFAULT_STORE_LOG[@]%/var/log/squid//store.log%g" \ -e "s%[@]DEFAULT_PID_FILE[@]%/var/run/squid.pid%g" \ -e "s%[@]DEFAULT_NETDB_FILE[@]%/var/cache/squid//netdb.state%g" \ -e "s%[@]DEFAULT_SWAP_DIR[@]%/var/cache/squid/%g" \ -e "s%[@]DEFAULT_SSL_DB_DIR[@]%/var/cache/squid//ssl_db%g" \ -e "s%[@]DEFAULT_ICON_DIR[@]%/usr/share/icons%g" \ -e "s%[@]DEFAULT_CONFIG_DIR[@]%/etc%g" \ -e "s%[@]DEFAULT_ERROR_DIR[@]%/usr/share/errors%g" \ -e "s%[@]DEFAULT_PREFIX[@]%/usr%g" \ -e "s%[@]DEFAULT_HOSTS[@]%/etc/hosts%g" \ -e "s%[@]SQUID[@]%SQUID\ 6.2%g" \ -f ./cf.data.sed \ < ./cf.data.pre >cf.data gawk -f ./mk-globals-c.awk < ./globals.h > globals.cc || (/bin/rm -f -f globals.cc && exit 1) gawk -f ./mk-string-arrays.awk < ./hier_code.h > hier_code.cc || (/bin/rm -f -f hier_code.cc && exit 1) gawk -f ./mk-string-arrays.awk < ./icp_opcode.h > icp_opcode.cc || (/bin/rm -f -f icp_opcode.cc && exit 1) gawk -f ./mk-string-arrays.awk < ./lookup_t.h > lookup_t.cc || (/bin/rm -f -f lookup_t.cc && exit 1) /bin/sh ./repl_modules.sh lru heap > repl_modules.cc gawk -f ./mk-string-arrays.awk < ./swap_log_op.h > swap_log_op.cc || (/bin/rm -f -f swap_log_op.cc && exit 1) /usr/bin/g++ -O2 -I/home/buildroot/autobuild/run/instance-0/output-1/host/include -o cf_gen ./cf_gen.cc -I. -I../include/ -I../src ./cf_gen.cc: In function 'int main(int, char**)': ./cf_gen.cc:268:63: error: forming reference to void auto &newEntry = entries.emplace_back(name); ^ ./cf_gen.cc:277:68: error: forming reference to void auto &newEntry = entries.emplace_back("comment"); ^ Makefile:7264: recipe for target 'cf_gen' failed make[2]: *** [cf_gen] Error 1 make[2]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/src' Makefile:600: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2' package/pkg-generic.mk:290: recipe for target '/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/.stamp_built' failed make: *** [/home/buildroot/autobuild/run/instance-0/output-1/build/squid-6.2/.stamp_built] Error 2 make: Leaving directory '/home/buildroot/autobuild/run/instance-0/buildroot'