libtool: install: /usr/bin/install -c sg_read /home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/bin/sgp_dd make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/src' make[2]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/src' Making install in doc make[2]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/doc' make[3]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg3_utils_json.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_elem_status.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rem_rest_elem.8 sg_rep_density.8 sg_rep_pip.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 '/home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/share/man/man8' /usr/bin/install -c -m 644 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_datetime.8 sg_sat_identify.8 sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_attr.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 sg_z_act_query.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 '/home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/share/man/man8' /usr/bin/install -c -m 644 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/share/man/man8' make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/doc' make[2]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/doc' Making install in scripts make[2]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/scripts' make[3]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/bin' make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/scripts' make[2]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/scripts' make[2]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48' make[3]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48' make[2]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48' make[1]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48' >>> sg3_utils 1.48 Fixing libtool files for la in $(find /home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/instance-0/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot:@STAGING_DIR@:g" \ \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ \ -e "s:@STAGING_DIR@:/home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/instance-0/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> sg3_utils 1.48 Installing to target GIT_DIR=. PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j17 DESTDIR=/home/buildroot/instance-0/output-1/target install -C /home/buildroot/instance-0/output-1/build/sg3_utils-1.48/ make[1]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48' Making install in include make[2]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/include' make[3]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/include' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/instance-0/output-1/target/usr/include/scsi' /usr/bin/install -c -m 644 sg_lib.h sg_lib_data.h sg_lib_names.h sg_cmds.h sg_cmds_basic.h sg_cmds_extra.h sg_cmds_mmc.h sg_json.h sg_json_sg_lib.h sg_pr2serr.h sg_unaligned.h sg_pt.h sg_pt_nvme.h sg_linux_inc.h sg_io_linux.h sg_pt_linux.h '/home/buildroot/instance-0/output-1/target/usr/include/scsi' make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/include' make[2]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/include' Making install in lib make[2]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/lib' make[3]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/lib' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/instance-0/output-1/target/usr/lib' /bin/sh ../libtool --mode=install /usr/bin/install -c libsgutils2.la '/home/buildroot/instance-0/output-1/target/usr/lib' libtool: install: /usr/bin/install -c .libs/libsgutils2-1.48.so.2.0.0 /home/buildroot/instance-0/output-1/target/usr/lib/libsgutils2-1.48.so.2.0.0 libtool: install: (cd /home/buildroot/instance-0/output-1/target/usr/lib && { ln -s -f libsgutils2-1.48.so.2.0.0 libsgutils2-1.48.so.2 || { rm -f libsgutils2-1.48.so.2 && ln -s libsgutils2-1.48.so.2.0.0 libsgutils2-1.48.so.2; }; }) libtool: install: (cd /home/buildroot/instance-0/output-1/target/usr/lib && { ln -s -f libsgutils2-1.48.so.2.0.0 libsgutils2.so || { rm -f libsgutils2.so && ln -s libsgutils2-1.48.so.2.0.0 libsgutils2.so; }; }) libtool: install: /usr/bin/install -c .libs/libsgutils2.lai /home/buildroot/instance-0/output-1/target/usr/lib/libsgutils2.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/lib' make[2]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/lib' Making install in src make[2]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/src' make[3]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/src' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/instance-0/output-1/target/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c sg_bg_ctl sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_elem_status sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rem_rest_elem sg_rep_density sg_rep_pip sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_datetime sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_seek sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_stream_ctl sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_attr sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_write_x sg_zone sg_z_act_query sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/home/buildroot/instance-0/output-1/target/usr/bin' libtool: install: /usr/bin/install -c sg_bg_ctl /home/buildroot/instance-0/output-1/target/usr/bin/sg_bg_ctl libtool: install: /usr/bin/install -c sg_compare_and_write /home/buildroot/instance-0/output-1/target/usr/bin/sg_compare_and_write libtool: install: /usr/bin/install -c sg_decode_sense /home/buildroot/instance-0/output-1/target/usr/bin/sg_decode_sense libtool: install: /usr/bin/install -c sg_format /home/buildroot/instance-0/output-1/target/usr/bin/sg_format libtool: install: /usr/bin/install -c sg_get_config /home/buildroot/instance-0/output-1/target/usr/bin/sg_get_config libtool: install: /usr/bin/install -c sg_get_elem_status /home/buildroot/instance-0/output-1/target/usr/bin/sg_get_elem_status libtool: install: /usr/bin/install -c sg_get_lba_status /home/buildroot/instance-0/output-1/target/usr/bin/sg_get_lba_status libtool: install: /usr/bin/install -c sg_ident /home/buildroot/instance-0/output-1/target/usr/bin/sg_ident libtool: install: /usr/bin/install -c sg_inq /home/buildroot/instance-0/output-1/target/usr/bin/sg_inq libtool: install: /usr/bin/install -c sg_logs /home/buildroot/instance-0/output-1/target/usr/bin/sg_logs libtool: install: /usr/bin/install -c sg_luns /home/buildroot/instance-0/output-1/target/usr/bin/sg_luns libtool: install: /usr/bin/install -c sg_modes /home/buildroot/instance-0/output-1/target/usr/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /home/buildroot/instance-0/output-1/target/usr/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /home/buildroot/instance-0/output-1/target/usr/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /home/buildroot/instance-0/output-1/target/usr/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /home/buildroot/instance-0/output-1/target/usr/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /home/buildroot/instance-0/output-1/target/usr/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /home/buildroot/instance-0/output-1/target/usr/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /home/buildroot/instance-0/output-1/target/usr/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /home/buildroot/instance-0/output-1/target/usr/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /home/buildroot/instance-0/output-1/target/usr/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /home/buildroot/instance-0/output-1/target/usr/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /home/buildroot/instance-0/output-1/target/usr/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /home/buildroot/instance-0/output-1/target/usr/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rem_rest_elem /home/buildroot/instance-0/output-1/target/usr/bin/sg_rem_rest_elem libtool: install: /usr/bin/install -c sg_rep_density /home/buildroot/instance-0/output-1/target/usr/bin/sg_rep_density libtool: install: /usr/bin/install -c sg_rep_pip /home/buildroot/instance-0/output-1/target/usr/bin/sg_rep_pip libtool: install: /usr/bin/install -c sg_rep_zones /home/buildroot/instance-0/output-1/target/usr/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /home/buildroot/instance-0/output-1/target/usr/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /home/buildroot/instance-0/output-1/target/usr/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /home/buildroot/instance-0/output-1/target/usr/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /home/buildroot/instance-0/output-1/target/usr/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /home/buildroot/instance-0/output-1/target/usr/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /home/buildroot/instance-0/output-1/target/usr/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_datetime /home/buildroot/instance-0/output-1/target/usr/bin/sg_sat_datetime libtool: install: /usr/bin/install -c sg_sat_identify /home/buildroot/instance-0/output-1/target/usr/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /home/buildroot/instance-0/output-1/target/usr/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/buildroot/instance-0/output-1/target/usr/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /home/buildroot/instance-0/output-1/target/usr/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_seek /home/buildroot/instance-0/output-1/target/usr/bin/sg_seek libtool: install: /usr/bin/install -c sg_senddiag /home/buildroot/instance-0/output-1/target/usr/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /home/buildroot/instance-0/output-1/target/usr/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /home/buildroot/instance-0/output-1/target/usr/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /home/buildroot/instance-0/output-1/target/usr/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /home/buildroot/instance-0/output-1/target/usr/bin/sg_stpg libtool: install: /usr/bin/install -c sg_stream_ctl /home/buildroot/instance-0/output-1/target/usr/bin/sg_stream_ctl libtool: install: /usr/bin/install -c sg_sync /home/buildroot/instance-0/output-1/target/usr/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /home/buildroot/instance-0/output-1/target/usr/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /home/buildroot/instance-0/output-1/target/usr/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /home/buildroot/instance-0/output-1/target/usr/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /home/buildroot/instance-0/output-1/target/usr/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /home/buildroot/instance-0/output-1/target/usr/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /home/buildroot/instance-0/output-1/target/usr/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_attr /home/buildroot/instance-0/output-1/target/usr/bin/sg_write_attr libtool: install: /usr/bin/install -c sg_write_buffer /home/buildroot/instance-0/output-1/target/usr/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /home/buildroot/instance-0/output-1/target/usr/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /home/buildroot/instance-0/output-1/target/usr/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /home/buildroot/instance-0/output-1/target/usr/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_write_x /home/buildroot/instance-0/output-1/target/usr/bin/sg_write_x libtool: install: /usr/bin/install -c sg_zone /home/buildroot/instance-0/output-1/target/usr/bin/sg_zone libtool: install: /usr/bin/install -c sg_z_act_query /home/buildroot/instance-0/output-1/target/usr/bin/sg_z_act_query libtool: install: /usr/bin/install -c sg_copy_results /home/buildroot/instance-0/output-1/target/usr/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /home/buildroot/instance-0/output-1/target/usr/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /home/buildroot/instance-0/output-1/target/usr/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /home/buildroot/instance-0/output-1/target/usr/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /home/buildroot/instance-0/output-1/target/usr/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /home/buildroot/instance-0/output-1/target/usr/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /home/buildroot/instance-0/output-1/target/usr/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/buildroot/instance-0/output-1/target/usr/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/buildroot/instance-0/output-1/target/usr/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/buildroot/instance-0/output-1/target/usr/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/buildroot/instance-0/output-1/target/usr/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/buildroot/instance-0/output-1/target/usr/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/buildroot/instance-0/output-1/target/usr/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/buildroot/instance-0/output-1/target/usr/bin/sgp_dd make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/src' make[2]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/src' Making install in doc make[2]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/doc' make[3]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/buildroot/instance-0/output-1/target/usr/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg3_utils_json.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_elem_status.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rem_rest_elem.8 sg_rep_density.8 sg_rep_pip.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 '/home/buildroot/instance-0/output-1/target/usr/share/man/man8' /usr/bin/install -c -m 644 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_datetime.8 sg_sat_identify.8 sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_attr.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 sg_z_act_query.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 '/home/buildroot/instance-0/output-1/target/usr/share/man/man8' /usr/bin/install -c -m 644 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/buildroot/instance-0/output-1/target/usr/share/man/man8' make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/doc' make[2]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/doc' Making install in scripts make[2]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/scripts' make[3]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/home/buildroot/instance-0/output-1/target/usr/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/buildroot/instance-0/output-1/target/usr/bin' make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/scripts' make[2]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48/scripts' make[2]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48' make[3]: Entering directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48' make[2]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48' make[1]: Leaving directory '/home/buildroot/instance-0/output-1/build/sg3_utils-1.48' for prog in compare_and_write copy_results dd decode_sense emc_trespass format get_config get_lba_status ident inq logs luns map26 map sgm_dd modes opcodes sgp_dd persist prevent raw rbuf rdac read readcap read_block_limits read_attr read_buffer read_long reassign referrals rep_zones requests reset reset_wp rmsn rtpg safte sanitize sat_identify sat_phy_event sat_read_gplog sat_set_features scan senddiag ses ses_microcode start stpg sync test_rwbuf timestamp turs unmap verify vpd write_buffer write_long write_same write_verify wr_mode xcopy zone; do rm -f /home/buildroot/instance-0/output-1/target/usr/bin/sg_${prog} ; done for prog in logging_level mandat readcap ready satl start stop temperature; do rm -f /home/buildroot/instance-0/output-1/target/usr/bin/scsi_${prog} ; done for prog in sginfo sgm_dd sgp_dd; do rm -f /home/buildroot/instance-0/output-1/target/usr/bin/${prog}; done >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/buildroot/instance-0/output-1/host/etc/meson sed -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O3', '-g0', '-D_FORTIFY_SOURCE=3'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_LDFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O3', '-g0', '-D_FORTIFY_SOURCE=3'@PKG_TARGET_CXXFLAGS@%g" -e "s%@TARGET_FCFLAGS@%'-O3', '-g0'@PKG_TARGET_FCFLAGS@%g" -e "s%@TARGET_CC@%/home/buildroot/instance-0/output-1/host/bin/s390x-buildroot-linux-gnu-gcc%g" -e "s%@TARGET_CXX@%/bin/false%g" -e "s%@TARGET_AR@%/home/buildroot/instance-0/output-1/host/bin/s390x-buildroot-linux-gnu-gcc-ar%g" -e "s%@TARGET_FC@%/bin/false%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%s390x%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_FCFLAGS@%%g" -e "s%@TARGET_CFLAGS@%%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%%g" -e "s%@BR2_CMAKE@%/home/buildroot/instance-0/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/instance-0/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/instance-0/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot%g" -e "s%@STATIC@%false%g" /home/buildroot/instance-0/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/instance-0/output-1/host/etc/meson/cross-compilation.conf.in sed -e "s%@TARGET_CC@%/home/buildroot/instance-0/output-1/host/bin/s390x-buildroot-linux-gnu-gcc%g" -e "s%@TARGET_CXX@%/bin/false%g" -e "s%@TARGET_AR@%/home/buildroot/instance-0/output-1/host/bin/s390x-buildroot-linux-gnu-gcc-ar%g" -e "s%@TARGET_FC@%/bin/false%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%s390x%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_FCFLAGS@%'-O3', '-g0'%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O3', '-g0', '-D_FORTIFY_SOURCE=3'%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O3', '-g0', '-D_FORTIFY_SOURCE=3'%g" -e "s%@BR2_CMAKE@%/home/buildroot/instance-0/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/instance-0/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/instance-0/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot%g" -e "s%@STATIC@%false%g" /home/buildroot/instance-0/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/instance-0/output-1/host/etc/meson/cross-compilation.conf if grep -q CONFIG_ASH=y /home/buildroot/instance-0/output-1/build/busybox-1.36.1/.config; then grep -qsE '^/bin/ash$' /home/buildroot/instance-0/output-1/target/etc/shells || echo "/bin/ash" >> /home/buildroot/instance-0/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/buildroot/instance-0/output-1/build/busybox-1.36.1/.config; then grep -qsE '^/bin/hush$' /home/buildroot/instance-0/output-1/target/etc/shells || echo "/bin/hush" >> /home/buildroot/instance-0/output-1/target/etc/shells; fi rm -f -r /home/buildroot/instance-0/output-1/target/usr/share/openrc { echo "baud=\"0\""; echo "term_type=\"vt100\"" ; echo "agetty_options=\"-L \""; } > /home/buildroot/instance-0/output-1/target/etc/conf.d/agetty.console ln -sf agetty /home/buildroot/instance-0/output-1/target/etc/init.d/agetty.console ln -sf /etc/init.d/agetty.console /home/buildroot/instance-0/output-1/target/etc/runlevels/default/agetty.console mkdir -p /home/buildroot/instance-0/output-1/target/etc echo "buildroot" > /home/buildroot/instance-0/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/instance-0/output-1/target/etc/hosts mkdir -p /home/buildroot/instance-0/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/instance-0/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/instance-0/output-1/target/etc/shadow grep -qsE '^/bin/sh$' /home/buildroot/instance-0/output-1/target/etc/shells || echo "/bin/sh" >> /home/buildroot/instance-0/output-1/target/etc/shells rm -rf /home/buildroot/instance-0/output-1/target/usr/include /home/buildroot/instance-0/output-1/target/usr/share/aclocal \ /home/buildroot/instance-0/output-1/target/usr/lib/pkgconfig /home/buildroot/instance-0/output-1/target/usr/share/pkgconfig \ /home/buildroot/instance-0/output-1/target/usr/lib/cmake /home/buildroot/instance-0/output-1/target/usr/share/cmake \ /home/buildroot/instance-0/output-1/target/usr/lib/rpm /home/buildroot/instance-0/output-1/target/usr/doc find /home/buildroot/instance-0/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/instance-0/output-1/target/lib/ /home/buildroot/instance-0/output-1/target/usr/lib/ /home/buildroot/instance-0/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f rm -rf /home/buildroot/instance-0/output-1/target/usr/share/gdb rm -rf /home/buildroot/instance-0/output-1/target/usr/share/bash-completion rm -rf /home/buildroot/instance-0/output-1/target/etc/bash_completion.d rm -rf /home/buildroot/instance-0/output-1/target/usr/share/zsh rm -rf /home/buildroot/instance-0/output-1/target/usr/man /home/buildroot/instance-0/output-1/target/usr/share/man rm -rf /home/buildroot/instance-0/output-1/target/usr/info /home/buildroot/instance-0/output-1/target/usr/share/info rm -rf /home/buildroot/instance-0/output-1/target/usr/doc /home/buildroot/instance-0/output-1/target/usr/share/doc rm -rf /home/buildroot/instance-0/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/instance-0/output-1/target/usr/share 2>/dev/null || true rm -rf /home/buildroot/instance-0/output-1/target/lib/debug /home/buildroot/instance-0/output-1/target/usr/lib/debug find /home/buildroot/instance-0/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /bin/true 2>/dev/null || true find /home/buildroot/instance-0/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /bin/true 2>/dev/null || true test -f /home/buildroot/instance-0/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/instance-0/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/instance-0/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2024.08-901-g0ad7035fce"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2024.11-git"; \ echo "PRETTY_NAME=\"Buildroot 2024.11-git\"" \ ) > /home/buildroot/instance-0/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/instance-0/output-1/target/etc >>> Sanitizing RPATH in target tree PARALLEL_JOBS=17 \ PER_PACKAGE_DIR=/home/buildroot/instance-0/output-1/per-package \ /home/buildroot/instance-0/buildroot/support/scripts/fix-rpath target touch /home/buildroot/instance-0/output-1/target/usr >>> Generating root filesystems common tables rm -rf /home/buildroot/instance-0/output-1/build/buildroot-fs mkdir -p /home/buildroot/instance-0/output-1/build/buildroot-fs printf ' \n' >> /home/buildroot/instance-0/output-1/build/buildroot-fs/full_users_table.txt printf ' /bin/busybox f 4755 0 0 - - - - -\n\n' > /home/buildroot/instance-0/output-1/build/buildroot-fs/full_devices_table.txt cat system/device_table.txt >> /home/buildroot/instance-0/output-1/build/buildroot-fs/full_devices_table.txt >>> Generating filesystem image rootfs.jffs2 mkdir -p /home/buildroot/instance-0/output-1/images rm -rf /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2 mkdir -p /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2 rsync -auH --exclude=/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM /home/buildroot/instance-0/output-1/target/ /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/target echo '#!/bin/sh' > /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/fakeroot echo "set -e" >> /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/fakeroot echo "chown -h -R 0:0 /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/target" >> /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/fakeroot PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /home/buildroot/instance-0/buildroot/support/scripts/mkusers /home/buildroot/instance-0/output-1/build/buildroot-fs/full_users_table.txt /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/target >> /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/fakeroot echo "/home/buildroot/instance-0/output-1/host/bin/makedevs -d /home/buildroot/instance-0/output-1/build/buildroot-fs/full_devices_table.txt /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/target" >> /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/fakeroot printf ' rm -rf /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/target/usr/lib/udev/hwdb.d/ /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/target/etc/udev/hwdb.d/\n' >> /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/fakeroot echo "find /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/target/run/ -mindepth 1 -prune -print0 | xargs -0r rm -rf --" >> /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/fakeroot echo "find /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/target/tmp/ -mindepth 1 -prune -print0 | xargs -0r rm -rf --" >> /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/fakeroot printf ' \n' >> /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/fakeroot printf ' \n' >> /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/fakeroot printf ' /home/buildroot/instance-0/output-1/host/sbin/mkfs.jffs2 -e 0x10000 --with-xattr -b -d /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/target -o /home/buildroot/instance-0/output-1/images/rootfs.jffs2\n' >> /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/fakeroot chmod a+x /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/fakeroot PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" FAKEROOTDONTTRYCHOWN=1 /home/buildroot/instance-0/output-1/host/bin/fakeroot -- /home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/fakeroot rootdir=/home/buildroot/instance-0/output-1/build/buildroot-fs/jffs2/target table='/home/buildroot/instance-0/output-1/build/buildroot-fs/full_devices_table.txt' ln -snf /home/buildroot/instance-0/output-1/host/s390x-buildroot-linux-gnu/sysroot /home/buildroot/instance-0/output-1/staging make: Leaving directory '/home/buildroot/instance-0/buildroot' make: Entering directory '/home/buildroot/instance-0/buildroot' >>> Buildroot 2024.08-901-g0ad7035fce Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-buildroot Collecting legal info >>> gcc-final 12.4.0 Collecting legal info COPYING.RUNTIME: OK (sha256: 9d6b43ce4d8de0c878bf16b54d8e7a10d9bd42b75178153e3af6a815bdc90f74) >>> host-gcc-final 12.4.0 Collecting legal info COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c) COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) COPYING3.LIB: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) >>> glibc 2.40-18-g5641780762723156b0d20a0b9f7df1d76831bab0 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) LICENSES: OK (sha256: bba29819a3e938fae92674d6a88533e10605e389da8b51cdcba0a94f6221c5bc) >>> host-bison 3.8.2 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-m4 1.4.19 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-skeleton Collecting legal info >>> host-tar 1.35 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-gawk 5.3.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-gcc-initial 12.4.0 Collecting legal info COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c) COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) COPYING3.LIB: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) >>> host-binutils 2.43.1 Collecting legal info COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: 56bdea73b6145ef6ac5259b3da390b981d840c24cb03b8e1cbc678de7ecfa18d) >>> host-gmp 6.3.0 Collecting legal info COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-mpc 1.3.1 Collecting legal info COPYING.LESSER: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) >>> host-mpfr 4.1.1 Collecting legal info COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118) >>> linux-headers 6.1.110 Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-openrc Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain Collecting legal info >>> busybox 1.36.1 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f) >>> kmod 31 Collecting legal info libkmod/COPYING: OK (sha256: 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3) COPYING: OK (sha256: 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> openssl Collecting legal info >>> libopenssl 3.3.2 Collecting legal info LICENSE.txt: OK (sha256: 7d5450cb2d142651b8afa315b5f238efc805dad827d91ba367d8516bc9d49e7a) >>> zlib Collecting legal info >>> zlib-ng 2.1.6 Collecting legal info LICENSE.md: OK (sha256: d3c80be055d94d798eaa786116e84fa0b010bc11420b5d2060d978ea77845436) >>> host-cmake 3.30.0 Collecting legal info Copyright.txt: OK (sha256: 0676e30827684487aa0ea8f72f01e9460a6320fa34a2888df0ad1dd3e8a06eb8) >>> libxcrypt 4.4.36 Collecting legal info LICENSING: OK (sha256: f9b48b0bc67a92b752780710aa774cf08b62ec2ebaa3f4aebd00069fba6effd2) COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> util-linux 2.39.3 Collecting legal info README.licensing: OK (sha256: 13f0ea46d12d798c095a6ad39d7ddc988e2e4d274c6494115f6b463f7bc4f702) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-autoconf 2.72 Collecting legal info COPYINGv3: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) COPYING.EXCEPTION: OK (sha256: 1f1cde9fb68b9b3cff18c420894bec5bd4defacd700b7d13df54a887301e5350) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-automake 1.16.5 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> ncurses 6.4-20230603 Collecting legal info COPYING: OK (sha256: 0413b2f4ea863194c174673032f0fca84f1ea1ed4eed6476baea68c075a631ce) >>> host-ncurses 6.4-20230603 Collecting legal info COPYING: OK (sha256: 0413b2f4ea863194c174673032f0fca84f1ea1ed4eed6476baea68c075a631ce) >>> cairo 1.18.2 Collecting legal info COPYING: OK (sha256: 67228a9f7c5f9b67c58f556f1be178f62da4d9e2e6285318d8c74d567255abdf) COPYING-LGPL-2.1: OK (sha256: 9e9e8608c4cdda51a78cc3a385f4ec9a2e4c96d5ecad74ac8bca5fca3e563b7d) COPYING-MPL-1.1: OK (sha256: 53692a2ed6c6a2c6ec9b32dd0b820dfae91e0a1fcdf625ca9ed0bdf8705fcc4f) >>> fontconfig 2.14.2 Collecting legal info COPYING: OK (sha256: 51a51aa9823704fd90bccc616cdd17ebabb5b2b3e9cbde886ca02c7002288067) >>> expat 2.6.3 Collecting legal info COPYING: OK (sha256: 122f2c27000472a201d337b9b31f7eb2b52d091b02857061a8880371612d9534) >>> freetype 2.13.2 Collecting legal info LICENSE.TXT: OK (sha256: 2e3bbb7d7c5c396368dd0853a790ec29ce5b8647163dde42a0493fb0d6556b2b) docs/FTL.TXT: OK (sha256: 08c135755dd589039470f1fdbb400daaabaaa50d0b366d19cebff4d22986baa1) docs/GPLv2.TXT: OK (sha256: c4120c6752c910c299e3bd9cb3a46ff262c268303ca2069b61f92f10a5656c18) >>> host-gperf 3.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-meson 1.3.1 Collecting legal info COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) >>> host-ninja 1.11.1.g95dee.kitware.jobserver-1 Collecting legal info COPYING: OK (sha256: eb7e9ab9690124c5c9f42bdc81383d886a3dede26345b6ed15bbad7caf81f7ea) >>> host-python-installer 0.7.0 Collecting legal info LICENSE: OK (sha256: 37b8b9f2569892fa54406383d431169dbb2115980d78b7efba6eeae5664c484f) >>> host-python-flit-core 3.9.0 Collecting legal info LICENSE: OK (sha256: 35b4f1dec512e617077fd6980dbb43ef8c2887adc5d0185edb4c04da175dd816) >>> host-python3 3.12.6 Collecting legal info LICENSE: OK (sha256: 3b2f81fe21d181c499c59a256c8e1968455d6689d269aa85373bfb6af41da3bf) >>> host-autoconf-archive 2023.02.20 Collecting legal info COPYING: OK (sha256: e6037104443f9a7829b2aa7c5370d0789a7bda3ca65a0b904cdc0c2e285d9195) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-expat 2.6.3 Collecting legal info COPYING: OK (sha256: 122f2c27000472a201d337b9b31f7eb2b52d091b02857061a8880371612d9534) >>> host-libffi 3.4.6 Collecting legal info LICENSE: OK (sha256: 67894089811f93fca47a76f85e017da6f8582d4ba0905963c6e0f1ad6df7a195) >>> host-zlib Collecting legal info >>> host-libzlib 1.3.1 Collecting legal info LICENSE: OK (sha256: 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243) >>> host-python-pypa-build 1.2.2 Collecting legal info LICENSE: OK (sha256: aaf9a29ca5907971ccf07de025375db34539a8d5eeebce20b46099805722106f) >>> host-python-packaging 24.1 Collecting legal info LICENSE: OK (sha256: cad1ef5bd340d73e074ba614d26f7deaca5c7940c3d8c34852e65c4909686c48) LICENSE.APACHE: OK (sha256: 0d542e0c8804e39aa7f37eb00da5a762149dc682d7829451287e11b938e94594) LICENSE.BSD: OK (sha256: b70e7e9b742f1cc6f948b34c16aa39ffece94196364bc88ff0d2180f0028fac5) >>> host-python-pyproject-hooks 1.2.0 Collecting legal info LICENSE: OK (sha256: 1b22b049b5267d6dfc23a67bf4a84d8ec04b9fdfb1a51d360e42b4342c8b4154) >>> host-python-setuptools 75.1.0 Collecting legal info LICENSE: OK (sha256: 86da0f01aeae46348a3c3d465195dc1ceccde79f79e87769a64b8da04b2a4741) >>> host-python-wheel 0.44.0 Collecting legal info LICENSE.txt: OK (sha256: 30c23618679108f3e8ea1d2a658c7ca417bdfc891c98ef1a89fa4ff0c9828654) >>> pixman 0.42.2 Collecting legal info COPYING: OK (sha256: fac9270f0987b96ff4533fca3548c633e02083cbba4a0172a3b149b2e4019793) >>> cni-plugins 1.3.0 Collecting legal info LICENSE: OK (sha256: b40930bbcf80744c86c46a12bc9da056641d722716c378f5659b9e555ef833e1) >>> host-go 1.22.8 Collecting legal info >>> host-go-src Collecting legal info LICENSE: OK (sha256: 2d36597f7117c38b006835ae7f537487207d8ec407aa9d9980794b2030cbc067) >>> host-go-bootstrap-stage3 1.21.8 Collecting legal info LICENSE: OK (sha256: 2d36597f7117c38b006835ae7f537487207d8ec407aa9d9980794b2030cbc067) >>> host-go-bootstrap-stage2 1.19.13 Collecting legal info LICENSE: OK (sha256: 2d36597f7117c38b006835ae7f537487207d8ec407aa9d9980794b2030cbc067) >>> host-go-bootstrap-stage1 1.4-bootstrap-20171003 Collecting legal info LICENSE: OK (sha256: dd26a7abddd02e2d0aba97805b31f248ef7835d9e10da289b22e3b8ab78b324d) >>> daq3 3.0.9 Collecting legal info COPYING: OK (sha256: 64601289158eddad72cb4de72652f9e64dc886942c910b38ddee93ba13b0db26) LICENSE: OK (sha256: 64601289158eddad72cb4de72652f9e64dc886942c910b38ddee93ba13b0db26) >>> docker-cli 27.0.3 Collecting legal info LICENSE: OK (sha256: 2d81ea060825006fc8f3fe28aa5dc0ffeb80faf325b612c955229157b8c10dc0) >>> ftop 1.0 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> inih 58 Collecting legal info LICENSE.txt: OK (sha256: 9ae3b39e83e9158e44b67733baa3bb2d84e80efdcfb14a5820210a42c7abdf7f) >>> libb64 1.2.1 Collecting legal info LICENSE: OK (sha256: 834b7afa1b3c40289a3be775d3625016be1c0d7ea7a4a26c1eb207f53dc961d8) >>> libcurl 8.10.1 Collecting legal info COPYING: OK (sha256: adb1fc06547fd136244179809f7b7c2d2ae6c4534f160aa513af9b6a12866a32) >>> libidn2 2.3.7 Collecting legal info COPYING: OK (sha256: 73483f797a83373fca1b968c11785b98c4fc4803cdc7d3210811ca8b075d6d76) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.LESSERv3: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) COPYING.unicode: OK (sha256: 01d621eef165cf4d3d3dbb737aa0699178d94c6f18cf87e9dde6db3ca7790f46) >>> libkcapi 1.5.0 Collecting legal info COPYING: OK (sha256: 00e0a844d67b190580a9dc5943e555a3d0b2158e21d01a25526762c619979326) COPYING.gplv2: OK (sha256: e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4) COPYING.bsd: OK (sha256: 13aa749a5b0a454917a944ed8fffc530b784f5ead522b1aacaf4ec8aa55a6239) >>> libmnl 1.0.5 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libnfc 1.8.0 Collecting legal info COPYING: OK (sha256: 9ccf26cfe845e0eb8bb58053e47366e7ab6b697ae010f7650978d4b71b7d1fc1) >>> libstrophe 0.13.1 Collecting legal info MIT-LICENSE.txt: OK (sha256: 82476f36ffd5e895a176013c0812166ba7b7d99f3d536fc7f5ed2e33e9f74a08) GPL-LICENSE.txt: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> lockdev 1.0.3 Collecting legal info LICENSE: OK (sha256: 5bbcbb737e60fe9deba08ecbd00920cfcc3403ba2e534c64fdeea49d6bb87509) >>> memtool 2018.03.0 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-mkpasswd Collecting legal info >>> mutt 2.2.13 Collecting legal info GPL: OK (sha256: 732f24b69a6c71cd8e01e4672bb8e12cc1cbb88a50a4665e6ca4fd95000a57ee) >>> odroidc2-firmware s905_6.0.1_v5.5 Collecting legal info >>> openrc 0.52.1 Collecting legal info LICENSE: OK (sha256: 6ac2bf77510808fbec7dc86cbfbca98dfc4c6b47dc99e4ca77b5370e097d8e70) >>> host-patchelf 0.13 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> phytool 2 Collecting legal info LICENSE: OK (sha256: f9c375a1be4a41f7b70301dd83c91cb89e41567478859b77eef375a52d782505) >>> host-riscv-isa-sim 00dfa28cd71326a9b553052bf0160cb76f0e7e07 Collecting legal info LICENSE: OK (sha256: c65e436d18972c9c4bd192494fe4870bd2e158179474975b80a3559f27631632) >>> host-boost 1.83.0 Collecting legal info LICENSE_1_0.txt: OK (sha256: c9bff75738922193e67fa726fa225535870d2aa1059f91452c411736284ad566) >>> host-dtc 1.7.1 Collecting legal info README.license: OK (sha256: 78e1e1ce5728a990d59c7de61d4741c49185d5129daf783b386380a214328d68) GPL: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) BSD-2-Clause: OK (sha256: 6313108c23efffa36948f8b2cff1560a5935373b527b0e1a837cc77e6ed1bacd) >>> host-flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> host-gettext Collecting legal info >>> host-gettext-tiny 0.3.2 Collecting legal info LICENSE: OK (sha256: 4c938aa3d8fa3c184bba5e87a8a2febc89560627c9d0567536879e3eca1a7b4f) extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> sg3_utils 1.48 Collecting legal info COPYING: OK (sha256: d212debdb0a5d7754c977f6dc53bb6c88b4ace7ab784ddbccd06bb970adb1a37) BSD_LICENSE: OK (sha256: 6b1a1de0b3394002973daaa407b93a1d2c13efd8dd1a32095d6872c36f09ba66) >>> host-acl 2.3.2 Collecting legal info doc/COPYING: OK (sha256: a45a845012742796534f7e91fe623262ccfb99460a2bd04015bd28d66fba95b8) doc/COPYING.LGPL: OK (sha256: 01b1f9f2c8ee648a7a596a1abe8aa4ed7899b1c9e5551bda06da6e422b04aa55) >>> host-attr 2.5.2 Collecting legal info doc/COPYING: OK (sha256: 98f318493be6b08bff3cd295791cde06c54e17882a3c74a1ed245eaa02533d52) doc/COPYING.LGPL: OK (sha256: 5decad7e58d90d44335bf2f45ce27563bd911065c6a1a02dfa7647c4efee75c8) >>> host-fakeroot 1.34 Collecting legal info COPYING: OK (sha256: fc82ca8b6fdb18d4e3e85cfd8ab58d1bcd3f1b29abe782895abd91d64763f8e7) >>> host-lzo 2.10 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-makedevs Collecting legal info >>> host-mtd 2.2.1 Collecting legal info COPYING: OK (sha256: dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa) >>> host-util-linux 2.39.3 Collecting legal info README.licensing: OK (sha256: 13f0ea46d12d798c095a6ad39d7ddc988e2e4d274c6494115f6b463f7bc4f702) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-zstd 1.5.6 Collecting legal info LICENSE: OK (sha256: 7055266497633c9025b777c78eb7235af13922117480ed5c674677adc381c9d8) COPYING: OK (sha256: f9c375a1be4a41f7b70301dd83c91cb89e41567478859b77eef375a52d782505) WARNING: the Buildroot source code has not been saved WARNING: linux-headers-6.1.110: cannot save license (LINUX_HEADERS_LICENSE_FILES not defined) WARNING: odroidc2-firmware-s905_6.0.1_v5.5: cannot save license (ODROIDC2_FIRMWARE_LICENSE_FILES not defined) Legal info produced in /home/buildroot/instance-0/output-1/legal-info make: Leaving directory '/home/buildroot/instance-0/buildroot'