>>> pcre2 10.42 Extracting mkdir -p /tmp/instance-19/output-1/per-package/pcre2/host mkdir -p /tmp/instance-19/output-1/per-package/pcre2/target bzcat /tmp/instance-19/dl/pcre2/pcre2-10.42.tar.bz2 | tar --strip-components=1 -C /tmp/instance-19/output-1/build/pcre2-10.42 -xf - >>> pcre2 10.42 Patching >>> pcre2 10.42 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /tmp/instance-19/output-1/build/pcre2-10.42 -name $file); do cp support/gnuconfig/$file $i; done; done >>> pcre2 10.42 Patching libtool patching file /tmp/instance-19/output-1/build/pcre2-10.42/ltmain.sh Hunk #1 succeeded at 2947 (offset 260 lines). Hunk #2 succeeded at 4540 (offset 263 lines). Hunk #3 succeeded at 6836 (offset 282 lines). Hunk #4 succeeded at 6846 (offset 282 lines). Hunk #5 succeeded at 7146 (offset 289 lines). Hunk #6 succeeded at 7450 (offset 301 lines). Hunk #7 succeeded at 8426 (offset 314 lines). Hunk #8 succeeded at 11058 (offset 348 lines). >>> pcre2 10.42 Configuring mkdir -p /tmp/instance-19/output-1/per-package/pcre2/host rsync -a --link-dest=/tmp/instance-19/output-1/per-package/host-skeleton/host/ /tmp/instance-19/output-1/per-package/host-skeleton/host/ /tmp/instance-19/output-1/per-package/pcre2/host rsync -a --link-dest=/tmp/instance-19/output-1/per-package/skeleton/host/ /tmp/instance-19/output-1/per-package/skeleton/host/ /tmp/instance-19/output-1/per-package/pcre2/host rsync -a --link-dest=/tmp/instance-19/output-1/per-package/toolchain/host/ /tmp/instance-19/output-1/per-package/toolchain/host/ /tmp/instance-19/output-1/per-package/pcre2/host mkdir -p /tmp/instance-19/output-1/per-package/pcre2/target rsync -a --link-dest=/tmp/instance-19/output-1/per-package/host-skeleton/target/ /tmp/instance-19/output-1/per-package/host-skeleton/target/ /tmp/instance-19/output-1/per-package/pcre2/target rsync -a --link-dest=/tmp/instance-19/output-1/per-package/skeleton/target/ /tmp/instance-19/output-1/per-package/skeleton/target/ /tmp/instance-19/output-1/per-package/pcre2/target rsync -a --link-dest=/tmp/instance-19/output-1/per-package/toolchain/target/ /tmp/instance-19/output-1/per-package/toolchain/target/ /tmp/instance-19/output-1/per-package/pcre2/target (cd /tmp/instance-19/output-1/build/pcre2-10.42/ && rm -rf config.cache && PATH="/tmp/instance-19/output-1/per-package/pcre2/host/bin:/tmp/instance-19/output-1/per-package/pcre2/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" AR="/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc-ar" AS="/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-as" LD="/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-ld" NM="/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc-nm" CC="/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc" GCC="/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc" CPP="/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-cpp" CXX="/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-g++" FC="/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gfortran" F77="/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gfortran" RANLIB="/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc-ranlib" READELF="/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-readelf" STRIP="/bin/true" OBJCOPY="/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-objcopy" OBJDUMP="/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/tmp/instance-19/output-1/per-package/pcre2/host/include" CFLAGS_FOR_BUILD="-O2 -I/tmp/instance-19/output-1/per-package/pcre2/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/tmp/instance-19/output-1/per-package/pcre2/host/include" LDFLAGS_FOR_BUILD="-L/tmp/instance-19/output-1/per-package/pcre2/host/lib -Wl,-rpath,/tmp/instance-19/output-1/per-package/pcre2/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-as" DEFAULT_LINKER="/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 " LDFLAGS="" FCFLAGS=" -O3 -g0" FFLAGS=" -O3 -g0" PKG_CONFIG="/tmp/instance-19/output-1/per-package/pcre2/host/bin/pkg-config" STAGING_DIR="/tmp/instance-19/output-1/per-package/pcre2/host/sparc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes CONFIG_SITE=/dev/null ./configure --target=sparc-buildroot-linux-uclibc --host=sparc-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --enable-nls --disable-static --enable-shared --enable-pcre2-8 --enable-pcre2-16 --disable-pcre2-32 --enable-jit ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --enable-nls checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for sparc-buildroot-linux-uclibc-strip... /bin/true checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking for sparc-buildroot-linux-uclibc-gcc... /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc accepts -g... yes checking for /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc option to enable C11 features... none needed checking whether /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc... none checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for sparc-buildroot-linux-uclibc-ar... /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc-ar checking the archiver (/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc-ar) interface... ar checking for int64_t... yes checking build system type... x86_64-pc-linux-gnu checking host system type... sparc-buildroot-linux-uclibc checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc... /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-ld checking if the linker (/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc-nm checking the name lister (/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to sparc-buildroot-linux-uclibc format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-ld option to reload object files... -r checking for sparc-buildroot-linux-uclibc-file... no checking for file... file configure: WARNING: using cross tools not prefixed with host triplet checking for sparc-buildroot-linux-uclibc-objdump... /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-objdump checking how to recognize dependent libraries... pass_all checking for sparc-buildroot-linux-uclibc-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for sparc-buildroot-linux-uclibc-ar... (cached) /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc-ar checking for archiver @FILE support... @ checking for sparc-buildroot-linux-uclibc-strip... (cached) /bin/true checking for sparc-buildroot-linux-uclibc-ranlib... /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc-ranlib checking command to parse /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc-nm output from /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for sparc-buildroot-linux-uclibc-mt... no checking for mt... mt checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc supports -fno-rtti -fno-exceptions... no checking for /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc option to produce PIC... -fPIC -DPIC checking if /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc PIC flag -fPIC -DPIC works... yes checking if /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc static flag -static works... yes checking if /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc supports -c -o file.o... yes checking if /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc supports -c -o file.o... (cached) yes checking whether the /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc linker (/tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether ln -s works... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking whether the -Werror option is usable... yes checking for simple visibility declarations... yes checking for __attribute__((uninitialized))... no checking for limits.h... yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for dirent.h... yes checking for windows.h... no checking for sys/wait.h... yes checking for an ANSI C-conforming const... yes checking for size_t... yes checking for bcopy... yes checking for memfd_create... no checking for memmove... yes checking for mkostemp... yes checking for secure_getenv... yes checking for strerror... yes checking for realpath... yes checking for zlib.h... no checking for gzopen in -lz... no checking for bzlib.h... no checking for libbz2... no checking for the pthreads library -lpthreads... no checking whether pthreads work without any flags... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes checking whether Intel CET is enabled... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating libpcre2-8.pc config.status: creating libpcre2-16.pc config.status: creating libpcre2-32.pc config.status: creating libpcre2-posix.pc config.status: creating pcre2-config config.status: creating src/pcre2.h config.status: creating src/config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing script-chmod commands config.status: executing delete-old-chartables commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --enable-nls pcre2-10.42 configuration summary: Install prefix ..................... : /usr C preprocessor ..................... : /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-cpp C compiler ......................... : /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-gcc Linker ............................. : /tmp/instance-19/output-1/per-package/pcre2/host/bin/sparc-buildroot-linux-uclibc-ld C preprocessor flags ............... : -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 C compiler flags ................... : -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -fvisibility=hidden Linker flags ....................... : Extra libraries .................... : Build 8-bit pcre2 library .......... : yes Build 16-bit pcre2 library ......... : yes Build 32-bit pcre2 library ......... : no Include debugging code ............. : no Enable JIT compiling support ....... : yes Use SELinux allocator in JIT ....... : no Enable Unicode support ............. : yes Newline char/sequence .............. : lf \R matches only ANYCRLF ............ : no \C is disabled ..................... : no EBCDIC coding ...................... : no EBCDIC code for NL ................. : n/a Rebuild char tables ................ : no Internal link size ................. : 2 Nested parentheses limit ........... : 250 Heap limit ......................... : 20000000 kibibytes Match limit ........................ : 10000000 Match depth limit .................. : MATCH_LIMIT Build shared libs .................. : yes Build static libs .................. : no Use JIT in pcre2grep ............... : yes Enable callouts in pcre2grep ....... : yes Enable fork in pcre2grep callouts .. : yes Initial buffer size for pcre2grep .. : 20480 Maximum buffer size for pcre2grep .. : 1048576 Link pcre2grep with libz ........... : no Link pcre2grep with libbz2 ......... : no Link pcre2test with libedit ........ : no Link pcre2test with libreadline .... : no Valgrind support ................... : no Code coverage ...................... : no Fuzzer support ..................... : no Use %zu and %td .................... : auto >>> pcre2 10.42 Building PATH="/tmp/instance-19/output-1/per-package/pcre2/host/bin:/tmp/instance-19/output-1/per-package/pcre2/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /home/autobuild/make/make -j1 -C /tmp/instance-19/output-1/build/pcre2-10.42/ make[1]: Entering directory '/tmp/instance-19/output-1/build/pcre2-10.42' rm -f src/pcre2_chartables.c ln -s /tmp/instance-19/output-1/build/pcre2-10.42/src/pcre2_chartables.c.dist /tmp/instance-19/output-1/build/pcre2-10.42/src/pcre2_chartables.c /home/autobuild/make/make all-am make[2]: Entering directory '/tmp/instance-19/output-1/build/pcre2-10.42' CC src/pcre2grep-pcre2grep.o CC src/libpcre2_8_la-pcre2_auto_possess.lo CC src/libpcre2_8_la-pcre2_compile.lo CC src/libpcre2_8_la-pcre2_config.lo CC src/libpcre2_8_la-pcre2_context.lo CC src/libpcre2_8_la-pcre2_convert.lo CC src/libpcre2_8_la-pcre2_dfa_match.lo CC src/libpcre2_8_la-pcre2_error.lo CC src/libpcre2_8_la-pcre2_extuni.lo CC src/libpcre2_8_la-pcre2_find_bracket.lo CC src/libpcre2_8_la-pcre2_jit_compile.lo src/pcre2_jit_compile.c:82:2: error: #error Unsupported architecture 82 | #error Unsupported architecture | ^~~~~ src/pcre2_jit_compile.c: In function 'init_frame': src/pcre2_jit_compile.c:545:30: warning: implicit declaration of function 'SSIZE_OF'; did you mean 'SSIZE_MAX'? [-Wimplicit-function-declaration] 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~~~~~~~ src/pcre2_jit_compile.c:2136:12: note: in expansion of macro 'STACK' 2136 | stackpos = STACK(stackpos); | ^~~~~ src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function) 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:2136:12: note: in expansion of macro 'STACK' 2136 | stackpos = STACK(stackpos); | ^~~~~ src/pcre2_jit_compile.c:545:39: note: each undeclared identifier is reported only once for each function it appears in 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:2136:12: note: in expansion of macro 'STACK' 2136 | stackpos = STACK(stackpos); | ^~~~~ src/pcre2_jit_compile.c: In function 'get_recurse_data_length': src/pcre2_jit_compile.c:593:58: error: 'sw' undeclared (first use in this function) 593 | #define OVECTOR(i) (OVECTOR_START + (i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:2421:35: note: in expansion of macro 'OVECTOR' 2421 | if (recurse_check_bit(common, OVECTOR(offset << 1))) | ^~~~~~~ src/pcre2_jit_compile.c: In function 'copy_recurse_data': src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function) 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:2643:12: note: in expansion of macro 'STACK' 2643 | stackptr = STACK(stackptr); | ^~~~~ src/pcre2_jit_compile.c: In function 'allocate_stack': src/pcre2_jit_compile.c:3147:71: error: 'sw' undeclared (first use in this function); did you mean 'swab'? 3147 | OP2(SLJIT_SUB, STACK_TOP, 0, STACK_TOP, 0, SLJIT_IMM, size * SSIZE_OF(sw)); | ^~ src/pcre2_jit_compile.c:618:75: note: in definition of macro 'OP2' 618 | sljit_emit_op2(compiler, (op), (dst), (dstw), (src1), (src1w), (src2), (src2w)) | ^~~~~ src/pcre2_jit_compile.c: In function 'free_stack': src/pcre2_jit_compile.c:3163:71: error: 'sw' undeclared (first use in this function); did you mean 'swab'? 3163 | OP2(SLJIT_ADD, STACK_TOP, 0, STACK_TOP, 0, SLJIT_IMM, size * SSIZE_OF(sw)); | ^~ src/pcre2_jit_compile.c:618:75: note: in definition of macro 'OP2' 618 | sljit_emit_op2(compiler, (op), (dst), (dstw), (src1), (src1w), (src2), (src2w)) | ^~~~~ src/pcre2_jit_compile.c: In function 'reset_ovector': src/pcre2_jit_compile.c:593:58: error: 'sw' undeclared (first use in this function) 593 | #define OVECTOR(i) (OVECTOR_START + (i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:42: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:3199:42: note: in expansion of macro 'OVECTOR' 3199 | OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), OVECTOR(i), SLJIT_R0, 0); | ^~~~~~~ src/pcre2_jit_compile.c: In function 'reset_early_fail': src/pcre2_jit_compile.c:3264:48: error: 'sw' undeclared (first use in this function) 3264 | OP1(SLJIT_MOV, SLJIT_MEM1(TMP1), -2 * SSIZE_OF(sw), src, 0); | ^~ src/pcre2_jit_compile.c:616:42: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c: In function 'do_reset_match': src/pcre2_jit_compile.c:593:58: error: 'sw' undeclared (first use in this function) 593 | #define OVECTOR(i) (OVECTOR_START + (i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:3284:49: note: in expansion of macro 'OVECTOR' 3284 | OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(1)); | ^~~~~~~ src/pcre2_jit_compile.c: In function 'copy_ovector': src/pcre2_jit_compile.c:593:58: error: 'sw' undeclared (first use in this function); did you mean 'swab'? 593 | #define OVECTOR(i) (OVECTOR_START + (i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:3360:51: note: in expansion of macro 'OVECTOR' 3360 | OP1(SLJIT_MOV, SLJIT_S2, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(1)); | ^~~~~~~ src/pcre2_jit_compile.c: In function 'do_revertframes': src/pcre2_jit_compile.c:6575:58: error: 'sw' undeclared (first use in this function); did you mean 'swab'? 6575 | OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(STACK_TOP), -SSIZE_OF(sw)); | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c: In function 'compile_dnref_search': src/pcre2_jit_compile.c:593:58: error: 'sw' undeclared (first use in this function) 593 | #define OVECTOR(i) (OVECTOR_START + (i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:9242:47: note: in expansion of macro 'OVECTOR' 9242 | OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(1)); | ^~~~~~~ src/pcre2_jit_compile.c: In function 'compile_ref_matchingpath': src/pcre2_jit_compile.c:593:58: error: 'sw' undeclared (first use in this function) 593 | #define OVECTOR(i) (OVECTOR_START + (i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:9281:49: note: in expansion of macro 'OVECTOR' 9281 | OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset)); | ^~~~~~~ src/pcre2_jit_compile.c: In function 'compile_ref_iterator_matchingpath': src/pcre2_jit_compile.c:593:58: error: 'sw' undeclared (first use in this function) 593 | #define OVECTOR(i) (OVECTOR_START + (i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:9487:53: note: in expansion of macro 'OVECTOR' 9487 | OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset)); | ^~~~~~~ src/pcre2_jit_compile.c: In function 'compile_callout_matchingpath': src/pcre2_jit_compile.c:9759:74: error: 'sw' undeclared (first use in this function) 9759 | sljit_uw callout_arg_size = (common->re->top_bracket + 1) * 2 * SSIZE_OF(sw); | ^~ src/pcre2_jit_compile.c: In function 'compile_assert_matchingpath': src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function) 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:9906:53: note: in expansion of macro 'STACK' 9906 | OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(0)); | ^~~~~ src/pcre2_jit_compile.c: In function 'match_once_common': src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function); did you mean 'swab'? 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:10303:90: note: in expansion of macro 'STACK' 10303 | OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(STACK_TOP), (ket != OP_KET || has_alternatives) ? STACK(-2) : STACK(-1)); | ^~~~~ src/pcre2_jit_compile.c: In function 'match_capture_common': src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function); did you mean 'swab'? 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:42: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:10339:41: note: in expansion of macro 'STACK' 10339 | OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(stacksize), TMP1, 0); | ^~~~~ src/pcre2_jit_compile.c: In function 'compile_bracket_matchingpath': src/pcre2_jit_compile.c:594:61: error: 'sw' undeclared (first use in this function) 594 | #define OVECTOR_PRIV(i) (common->cbra_ptr + (i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:10516:24: note: in expansion of macro 'OVECTOR_PRIV' 10516 | private_data_ptr = OVECTOR_PRIV(offset); | ^~~~~~~~~~~~ src/pcre2_jit_compile.c: In function 'compile_bracketpos_matchingpath': src/pcre2_jit_compile.c:594:61: error: 'sw' undeclared (first use in this function) 594 | #define OVECTOR_PRIV(i) (common->cbra_ptr + (i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:11047:17: note: in expansion of macro 'OVECTOR_PRIV' 11047 | cbraprivptr = OVECTOR_PRIV(offset); | ^~~~~~~~~~~~ src/pcre2_jit_compile.c: In function 'compile_iterator_matchingpath': src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function) 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:11453:41: note: in expansion of macro 'STACK' 11453 | int offset0 = (private_data_ptr == 0) ? STACK(0) : private_data_ptr; | ^~~~~ src/pcre2_jit_compile.c: In function 'compile_fail_accept_matchingpath': src/pcre2_jit_compile.c:593:58: error: 'sw' undeclared (first use in this function) 593 | #define OVECTOR(i) (OVECTOR_START + (i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:634:62: note: in definition of macro 'CMP' 634 | sljit_emit_cmp(compiler, (type), (src1), (src1w), (src2), (src2w)) | ^~~~~ src/pcre2_jit_compile.c:11973:94: note: in expansion of macro 'OVECTOR' 11973 | add_jump(compiler, &common->accept, CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(0))); | ^~~~~~~ src/pcre2_jit_compile.c: In function 'compile_close_matchingpath': src/pcre2_jit_compile.c:594:61: error: 'sw' undeclared (first use in this function) 594 | #define OVECTOR_PRIV(i) (common->cbra_ptr + (i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:12013:49: note: in expansion of macro 'OVECTOR_PRIV' 12013 | OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR_PRIV(offset)); | ^~~~~~~~~~~~ src/pcre2_jit_compile.c: In function 'compile_control_verb_matchingpath': src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function) 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:42: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:12037:41: note: in expansion of macro 'STACK' 12037 | OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(0), STR_PTR, 0); | ^~~~~ src/pcre2_jit_compile.c: In function 'compile_then_trap_matchingpath': src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function) 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:42: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:12077:39: note: in expansion of macro 'STACK' 12077 | OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(size - 1), SLJIT_IMM, BACKTRACK_AS(then_trap_backtrack)->start); | ^~~~~ src/pcre2_jit_compile.c: In function 'compile_matchingpath': src/pcre2_jit_compile.c:593:58: error: 'sw' undeclared (first use in this function) 593 | #define OVECTOR(i) (OVECTOR_START + (i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:12146:51: note: in expansion of macro 'OVECTOR' 12146 | OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(0)); | ^~~~~~~ src/pcre2_jit_compile.c: In function 'compile_iterator_backtrackingpath': src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function) 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:12430:41: note: in expansion of macro 'STACK' 12430 | int offset0 = (private_data_ptr == 0) ? STACK(0) : private_data_ptr; | ^~~~~ src/pcre2_jit_compile.c: In function 'compile_ref_iterator_backtrackingpath': src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function) 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:12558:53: note: in expansion of macro 'STACK' 12558 | OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(0)); | ^~~~~ src/pcre2_jit_compile.c: In function 'compile_assert_backtrackingpath': src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function) 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:12607:53: note: in expansion of macro 'STACK' 12607 | OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(0)); | ^~~~~ src/pcre2_jit_compile.c: In function 'compile_bracket_backtrackingpath': src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function) 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:12724:50: note: in expansion of macro 'STACK' 12724 | OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(STACK_TOP), STACK(0)); | ^~~~~ src/pcre2_jit_compile.c: In function 'compile_bracketpos_backtrackingpath': src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function); did you mean 'swab'? 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:13137:52: note: in expansion of macro 'STACK' 13137 | OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(STACK_TOP), STACK(0)); | ^~~~~ src/pcre2_jit_compile.c: In function 'compile_control_verb_backtrackingpath': src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function); did you mean 'swab'? 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:13209:57: note: in expansion of macro 'STACK' 13209 | OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(STACK_TOP), STACK(0)); | ^~~~~ src/pcre2_jit_compile.c: In function 'compile_then_trap_backtrackingpath': src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function); did you mean 'swab'? 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:13267:48: note: in expansion of macro 'STACK' 13267 | OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(STACK_TOP), STACK(size - 3)); | ^~~~~ src/pcre2_jit_compile.c: In function 'compile_backtrackingpath': src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function); did you mean 'swab'? 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:57: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:13297:52: note: in expansion of macro 'STACK' 13297 | OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(STACK_TOP), STACK(0)); | ^~~~~ src/pcre2_jit_compile.c: In function 'compile_recurse': src/pcre2_jit_compile.c:545:39: error: 'sw' undeclared (first use in this function) 545 | #define STACK(i) ((i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:616:42: note: in definition of macro 'OP1' 616 | sljit_emit_op1(compiler, (op), (dst), (dstw), (src), (srcw)) | ^~~~ src/pcre2_jit_compile.c:13515:39: note: in expansion of macro 'STACK' 13515 | OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(local_size - 1), TMP2, 0); | ^~~~~ src/pcre2_jit_compile.c: In function 'jit_compile': src/pcre2_jit_compile.c:593:58: error: 'sw' undeclared (first use in this function) 593 | #define OVECTOR(i) (OVECTOR_START + (i) * SSIZE_OF(sw)) | ^~ src/pcre2_jit_compile.c:13874:23: note: in expansion of macro 'OVECTOR' 13874 | common->start_ptr = OVECTOR(0); | ^~~~~~~ src/pcre2_jit_compile.c: In function 'pcre2_jit_compile_8': src/pcre2_jit_compile.c:14455:15: warning: implicit declaration of function 'SLJIT_MALLOC_EXEC'; did you mean 'SLJIT_MALLOC'? [-Wimplicit-function-declaration] 14455 | void *ptr = SLJIT_MALLOC_EXEC(32, NULL); | ^~~~~~~~~~~~~~~~~ | SLJIT_MALLOC src/pcre2_jit_compile.c:14455:15: warning: initialization of 'void *' from 'int' makes pointer from integer without a cast [-Wint-conversion] src/pcre2_jit_compile.c:14458:5: warning: implicit declaration of function 'SLJIT_FREE_EXEC'; did you mean 'SLJIT_FREE'? [-Wimplicit-function-declaration] 14458 | SLJIT_FREE_EXEC(((sljit_u8*)(ptr)) + SLJIT_EXEC_OFFSET(ptr), NULL); | ^~~~~~~~~~~~~~~ | SLJIT_FREE src/pcre2_jit_compile.c:14458:42: warning: implicit declaration of function 'SLJIT_EXEC_OFFSET'; did you mean 'SLJIT_LOCALS_OFFSET'? [-Wimplicit-function-declaration] 14458 | SLJIT_FREE_EXEC(((sljit_u8*)(ptr)) + SLJIT_EXEC_OFFSET(ptr), NULL); | ^~~~~~~~~~~~~~~~~ | SLJIT_LOCALS_OFFSET make[2]: *** [Makefile:2452: src/libpcre2_8_la-pcre2_jit_compile.lo] Error 1 make[2]: Leaving directory '/tmp/instance-19/output-1/build/pcre2-10.42' make[1]: *** [Makefile:1440: all] Error 2 make[1]: Leaving directory '/tmp/instance-19/output-1/build/pcre2-10.42' make: *** [package/pkg-generic.mk:293: /tmp/instance-19/output-1/build/pcre2-10.42/.stamp_built] Error 2 make: Leaving directory '/tmp/instance-19/buildroot'