libtool: install: /usr/bin/install -c sg_modes /home/naourr/work/instance-3/output-1/host/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /home/naourr/work/instance-3/output-1/host/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /home/naourr/work/instance-3/output-1/host/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /home/naourr/work/instance-3/output-1/host/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /home/naourr/work/instance-3/output-1/host/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /home/naourr/work/instance-3/output-1/host/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /home/naourr/work/instance-3/output-1/host/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /home/naourr/work/instance-3/output-1/host/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /home/naourr/work/instance-3/output-1/host/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /home/naourr/work/instance-3/output-1/host/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /home/naourr/work/instance-3/output-1/host/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /home/naourr/work/instance-3/output-1/host/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /home/naourr/work/instance-3/output-1/host/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rep_zones /home/naourr/work/instance-3/output-1/host/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /home/naourr/work/instance-3/output-1/host/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /home/naourr/work/instance-3/output-1/host/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /home/naourr/work/instance-3/output-1/host/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /home/naourr/work/instance-3/output-1/host/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /home/naourr/work/instance-3/output-1/host/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /home/naourr/work/instance-3/output-1/host/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_identify /home/naourr/work/instance-3/output-1/host/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /home/naourr/work/instance-3/output-1/host/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /home/naourr/work/instance-3/output-1/host/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /home/naourr/work/instance-3/output-1/host/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_seek /home/naourr/work/instance-3/output-1/host/bin/sg_seek libtool: install: /usr/bin/install -c sg_senddiag /home/naourr/work/instance-3/output-1/host/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /home/naourr/work/instance-3/output-1/host/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /home/naourr/work/instance-3/output-1/host/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /home/naourr/work/instance-3/output-1/host/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /home/naourr/work/instance-3/output-1/host/bin/sg_stpg libtool: install: /usr/bin/install -c sg_stream_ctl /home/naourr/work/instance-3/output-1/host/bin/sg_stream_ctl libtool: install: /usr/bin/install -c sg_sync /home/naourr/work/instance-3/output-1/host/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /home/naourr/work/instance-3/output-1/host/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /home/naourr/work/instance-3/output-1/host/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /home/naourr/work/instance-3/output-1/host/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /home/naourr/work/instance-3/output-1/host/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /home/naourr/work/instance-3/output-1/host/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /home/naourr/work/instance-3/output-1/host/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_buffer /home/naourr/work/instance-3/output-1/host/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /home/naourr/work/instance-3/output-1/host/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /home/naourr/work/instance-3/output-1/host/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /home/naourr/work/instance-3/output-1/host/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_write_x /home/naourr/work/instance-3/output-1/host/bin/sg_write_x libtool: install: /usr/bin/install -c sg_zone /home/naourr/work/instance-3/output-1/host/bin/sg_zone libtool: install: /usr/bin/install -c sg_copy_results /home/naourr/work/instance-3/output-1/host/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /home/naourr/work/instance-3/output-1/host/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /home/naourr/work/instance-3/output-1/host/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /home/naourr/work/instance-3/output-1/host/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /home/naourr/work/instance-3/output-1/host/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /home/naourr/work/instance-3/output-1/host/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /home/naourr/work/instance-3/output-1/host/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /home/naourr/work/instance-3/output-1/host/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /home/naourr/work/instance-3/output-1/host/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /home/naourr/work/instance-3/output-1/host/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /home/naourr/work/instance-3/output-1/host/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /home/naourr/work/instance-3/output-1/host/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /home/naourr/work/instance-3/output-1/host/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /home/naourr/work/instance-3/output-1/host/bin/sgp_dd make[3]: Leaving directory '/home/naourr/work/instance-3/output-1/build/host-sg3_utils-1.45/src' make[2]: Leaving directory '/home/naourr/work/instance-3/output-1/build/host-sg3_utils-1.45/src' Making install in doc make[2]: Entering directory '/home/naourr/work/instance-3/output-1/build/host-sg3_utils-1.45/doc' make[3]: Entering directory '/home/naourr/work/instance-3/output-1/build/host-sg3_utils-1.45/doc' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/naourr/work/instance-3/output-1/host/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_elem_status.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 '/home/naourr/work/instance-3/output-1/host/share/man/man8' /usr/bin/install -c -m 644 sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/home/naourr/work/instance-3/output-1/host/share/man/man8' make[3]: Leaving directory '/home/naourr/work/instance-3/output-1/build/host-sg3_utils-1.45/doc' make[2]: Leaving directory '/home/naourr/work/instance-3/output-1/build/host-sg3_utils-1.45/doc' Making install in scripts make[2]: Entering directory '/home/naourr/work/instance-3/output-1/build/host-sg3_utils-1.45/scripts' make[3]: Entering directory '/home/naourr/work/instance-3/output-1/build/host-sg3_utils-1.45/scripts' make[3]: Nothing to be done for 'install-data-am'. /usr/bin/mkdir -p '/home/naourr/work/instance-3/output-1/host/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/home/naourr/work/instance-3/output-1/host/bin' make[3]: Leaving directory '/home/naourr/work/instance-3/output-1/build/host-sg3_utils-1.45/scripts' make[2]: Leaving directory '/home/naourr/work/instance-3/output-1/build/host-sg3_utils-1.45/scripts' make[2]: Entering directory '/home/naourr/work/instance-3/output-1/build/host-sg3_utils-1.45' make[3]: Entering directory '/home/naourr/work/instance-3/output-1/build/host-sg3_utils-1.45' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/naourr/work/instance-3/output-1/build/host-sg3_utils-1.45' make[2]: Leaving directory '/home/naourr/work/instance-3/output-1/build/host-sg3_utils-1.45' make[1]: Leaving directory '/home/naourr/work/instance-3/output-1/build/host-sg3_utils-1.45' utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6.tar.gz: OK (sha256: 8b5ba0058a78de69faf6822bb10b457fff2f9e55dc112ccb81c35214b061c6e6) >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Extracting gzip -d -c /home/naourr/work/instance-3/dl/utp_com/utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6.tar.gz | /home/naourr/work/instance-3/output-1/host/bin/tar --strip-components=1 -C /home/naourr/work/instance-3/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6 -xf - >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Patching >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Configuring >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Building PATH="/home/naourr/work/instance-3/output-1/host/bin:/home/naourr/work/instance-3/output-1/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/naourr/bin:/home/naourr/git/git-wrappers:/home/naourr/.local/bin:/home/naourr/bin" PKG_CONFIG="/home/naourr/work/instance-3/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/naourr/work/instance-3/output-1/host/lib/pkgconfig:/home/naourr/work/instance-3/output-1/host/share/pkgconfig" AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld" NM="/usr/bin/nm" CC="/usr/bin/gcc" GCC="/usr/bin/gcc" CXX="/usr/bin/g++" CPP="/usr/bin/cpp" OBJCOPY="/usr/bin/objcopy" RANLIB="/usr/bin/ranlib" CPPFLAGS="-I/home/naourr/work/instance-3/output-1/host/include" CFLAGS="-O2 -I/home/naourr/work/instance-3/output-1/host/include" CXXFLAGS="-O2 -I/home/naourr/work/instance-3/output-1/host/include" LDFLAGS="-L/home/naourr/work/instance-3/output-1/host/lib -Wl,-rpath,/home/naourr/work/instance-3/output-1/host/lib" INTLTOOL_PERL=/usr/bin/perl /usr/bin/make -j4 -C /home/naourr/work/instance-3/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6 make[1]: Entering directory '/home/naourr/work/instance-3/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6' /usr/bin/gcc -c -o utp_com.o utp_com.c -O2 -I/home/naourr/work/instance-3/output-1/host/include /usr/bin/gcc -o utp_com utp_com.o -L/home/naourr/work/instance-3/output-1/host/lib -Wl,-rpath,/home/naourr/work/instance-3/output-1/host/lib make[1]: Leaving directory '/home/naourr/work/instance-3/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6' >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Installing to host directory /usr/bin/install -D -m 755 /home/naourr/work/instance-3/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6/utp_com /home/naourr/work/instance-3/output-1/host/bin/utp_com wipe-2.3.1.tar.bz2: OK (sha256: 463916370f9b35bb34419c2c0ae3dc4c0a471db32e8595afa1d14c0337b61aa0) >>> wipe 2.3.1 Extracting bzcat /home/naourr/work/instance-3/dl/wipe/wipe-2.3.1.tar.bz2 | /home/naourr/work/instance-3/output-1/host/bin/tar --strip-components=1 -C /home/naourr/work/instance-3/output-1/build/wipe-2.3.1 -xf - >>> wipe 2.3.1 Patching Applying 0001-musl.patch using patch: patching file rand.h >>> wipe 2.3.1 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/naourr/work/instance-3/output-1/build/wipe-2.3.1 -name $file); do cp support/gnuconfig/$file $i; done; done >>> wipe 2.3.1 Patching libtool >>> wipe 2.3.1 Configuring (cd /home/naourr/work/instance-3/output-1/build/wipe-2.3.1/ && rm -rf config.cache && PATH="/home/naourr/work/instance-3/output-1/host/bin:/home/naourr/work/instance-3/output-1/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/naourr/bin:/home/naourr/git/git-wrappers:/home/naourr/.local/bin:/home/naourr/bin" AR="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-ar" AS="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-as" LD="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-ld" NM="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-nm" CC="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc" GCC="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc" CPP="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-cpp" CXX="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-g++" FC="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gfortran" F77="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gfortran" RANLIB="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-ranlib" READELF="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-readelf" STRIP="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-strip" OBJCOPY="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-objcopy" OBJDUMP="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/naourr/work/instance-3/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/naourr/work/instance-3/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/naourr/work/instance-3/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/naourr/work/instance-3/output-1/host/lib -Wl,-rpath,/home/naourr/work/instance-3/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-as" DEFAULT_LINKER="/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/naourr/work/instance-3/output-1/host/bin/pkg-config" STAGING_DIR="/home/naourr/work/instance-3/output-1/host/nds32le-buildroot-linux-gnu/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CONFIG_SITE=/dev/null ./configure --target=nds32le-buildroot-linux-gnu --host=nds32le-buildroot-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared ) loading site script /dev/null creating cache ./config.cache checking host system type... nds32le-buildroot-linux-gnu checking target system type... nds32le-buildroot-linux-gnu checking build system type... x86_64-pc-linux-gnu checking for gcc... /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc checking whether the C compiler (/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os ) works... yes checking whether the C compiler (/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os ) is a cross-compiler... yes checking whether we are using GNU C... yes checking whether /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc accepts -g... yes checking for POSIXized ISC... no checking how to run the C preprocessor... /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-cpp checking whether /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc needs -traditional... no checking for a BSD compatible install... /usr/bin/install -c checking whether the C compiler accepts -pipe... yes checking whether the C compiler accepts -g... yes checking whether the C compiler accepts -O0... yes checking whether the C compiler accepts -O2... yes checking whether the C compiler accepts -ansi... yes checking whether the C compiler accepts -pedantic... yes checking whether the C compiler accepts -Wall... yes checking whether the C compiler accepts -Werror... yes checking for dirent.h that defines DIR... yes checking for opendir in -ldir... no checking for ANSI C header files... yes checking for unistd.h... yes checking for stdint.h... yes checking for fcntl.h... yes checking for memory.h... yes checking for linux/fs.h... yes checking for sys/mount.h... yes checking for sys/disklabel.h... no checking for sys/ioctl.h... yes checking for sys/file.h... yes checking for sys/stat.h... yes checking for sys/time.h... yes checking for sys/types.h... yes checking for getopt.h... yes checking for errno.h... yes checking for termio.h... yes checking for termios.h... yes checking for linux/mtio.h... yes checking for working const... yes checking for inline... __inline__ checking for off_t... yes checking for size_t... yes checking whether stat file-mode macros are broken... no checking for unistd.h... (cached) yes checking for getpagesize... yes checking for working mmap... (cached) yes checking for getopt... yes checking for strnlen... yes checking for bzero... yes checking for memset... yes checking for memcpy... yes checking for realloc... yes checking for fchmod... yes checking for ioctl... yes checking for fcntl... yes checking for lockf... yes checking for flock... yes checking for fsync... yes checking for fdatasync... yes checking for unlink... yes checking for rmdir... yes checking for remove... yes checking for rename... yes checking for dirfd... yes updating cache ./config.cache creating ./config.status creating Makefile creating config.h >>> wipe 2.3.1 Building PATH="/home/naourr/work/instance-3/output-1/host/bin:/home/naourr/work/instance-3/output-1/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/naourr/bin:/home/naourr/git/git-wrappers:/home/naourr/.local/bin:/home/naourr/bin" /usr/bin/make -j4 -C /home/naourr/work/instance-3/output-1/build/wipe-2.3.1/ make[1]: Entering directory '/home/naourr/work/instance-3/output-1/build/wipe-2.3.1' /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o main.o main.c /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o wipe.o wipe.c /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o rand.o rand.c /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o dir.o dir.c /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o file.o file.c /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o blkdev.o blkdev.c /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o lock.o lock.c /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o text.o text.c /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o str.o str.c /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o percent.o percent.c /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o prompt.o prompt.c /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o io.o io.c /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o mt.o mt.c /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-gcc *.o -o wipe make[1]: Leaving directory '/home/naourr/work/instance-3/output-1/build/wipe-2.3.1' >>> wipe 2.3.1 Installing to target /usr/bin/install -D -m 0755 /home/naourr/work/instance-3/output-1/build/wipe-2.3.1/wipe /home/naourr/work/instance-3/output-1/target/usr/bin/wipe wireless-regdb-2020.04.29.tar.xz: OK (sha256: 89fd031aed5977c219a71501e144375a10e7c90d1005d5d086ea7972886a2c7a) >>> wireless-regdb 2020.04.29 Extracting xzcat /home/naourr/work/instance-3/dl/wireless-regdb/wireless-regdb-2020.04.29.tar.xz | /home/naourr/work/instance-3/output-1/host/bin/tar --strip-components=1 -C /home/naourr/work/instance-3/output-1/build/wireless-regdb-2020.04.29 -xf - >>> wireless-regdb 2020.04.29 Patching >>> wireless-regdb 2020.04.29 Configuring >>> wireless-regdb 2020.04.29 Building >>> wireless-regdb 2020.04.29 Installing to target /usr/bin/install -m 644 -D -T /home/naourr/work/instance-3/output-1/build/wireless-regdb-2020.04.29/regulatory.db /home/naourr/work/instance-3/output-1/target/lib/firmware/regulatory.db /usr/bin/install -m 644 -D -T /home/naourr/work/instance-3/output-1/build/wireless-regdb-2020.04.29/regulatory.db.p7s /home/naourr/work/instance-3/output-1/target/lib/firmware/regulatory.db.p7s >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/naourr/work/instance-3/output-1/host/etc/meson sed -e 's%@TARGET_CROSS@%/home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-%g' -e 's%@TARGET_ARCH@%nds32le%g' -e 's%@TARGET_CPU@%%g' -e 's%@TARGET_ENDIAN@%little%g' -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os'@PKG_TARGET_CFLAGS@%g" -e 's%@HOST_DIR@%/home/naourr/work/instance-3/output-1/host%g' -e 's%@STAGING_DIR@%/home/naourr/work/instance-3/output-1/host/nds32le-buildroot-linux-gnu/sysroot%g' -e 's%@STATIC@%false%g' package/meson//cross-compilation.conf.in > /home/naourr/work/instance-3/output-1/host/etc/meson/cross-compilation.conf.in sed -e 's%@PKG_TARGET_CFLAGS@%%g' -e 's%@PKG_TARGET_LDFLAGS@%%g' -e 's%@PKG_TARGET_CXXFLAGS@%%g' /home/naourr/work/instance-3/output-1/host/etc/meson/cross-compilation.conf.in > /home/naourr/work/instance-3/output-1/host/etc/meson/cross-compilation.conf /usr/bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/naourr/work/instance-3/output-1/target/etc/inittab /usr/bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/naourr/work/instance-3/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /home/naourr/work/instance-3/output-1/build/busybox-1.32.0/.config; then grep -qsE '^/bin/ash$' /home/naourr/work/instance-3/output-1/target/etc/shells || echo "/bin/ash" >> /home/naourr/work/instance-3/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/naourr/work/instance-3/output-1/build/busybox-1.32.0/.config; then grep -qsE '^/bin/hush$' /home/naourr/work/instance-3/output-1/target/etc/shells || echo "/bin/hush" >> /home/naourr/work/instance-3/output-1/target/etc/shells; fi rm -rf /home/naourr/work/instance-3/output-1/target/usr/share/lua/5.3/doc rm -rf /home/naourr/work/instance-3/output-1/target/usr/lib/luarocks mkdir -p /home/naourr/work/instance-3/output-1/target/etc echo "buildroot" > /home/naourr/work/instance-3/output-1/target/etc/hostname /usr/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/naourr/work/instance-3/output-1/target/etc/hosts mkdir -p /home/naourr/work/instance-3/output-1/target/etc echo "Welcome to Buildroot" > /home/naourr/work/instance-3/output-1/target/etc/issue /usr/bin/sed -i -e s,^root:[^:]*:,root::, /home/naourr/work/instance-3/output-1/target/etc/shadow rm -f /home/naourr/work/instance-3/output-1/target/bin/sh if [ -x /home/naourr/work/instance-3/output-1/target/sbin/swapon -a -x /home/naourr/work/instance-3/output-1/target/sbin/swapoff ]; then /usr/bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/naourr/work/instance-3/output-1/target/etc/inittab; else /usr/bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/naourr/work/instance-3/output-1/target/etc/inittab; fi printf '%s\n' C en_US locale-archive > /home/naourr/work/instance-3/output-1/build/locales.nopurge for dir in /home/naourr/work/instance-3/output-1/target/usr/share/locale /home/naourr/work/instance-3/output-1/target/usr/share/X11/locale /home/naourr/work/instance-3/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/naourr/work/instance-3/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/naourr/work/instance-3/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/naourr/work/instance-3/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/naourr/work/instance-3/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/naourr/work/instance-3/output-1/target/usr/include /home/naourr/work/instance-3/output-1/target/usr/share/aclocal \ /home/naourr/work/instance-3/output-1/target/usr/lib/pkgconfig /home/naourr/work/instance-3/output-1/target/usr/share/pkgconfig \ /home/naourr/work/instance-3/output-1/target/usr/lib/cmake /home/naourr/work/instance-3/output-1/target/usr/share/cmake \ /home/naourr/work/instance-3/output-1/target/usr/doc find /home/naourr/work/instance-3/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/naourr/work/instance-3/output-1/target/lib/ /home/naourr/work/instance-3/output-1/target/usr/lib/ /home/naourr/work/instance-3/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f rm -rf /home/naourr/work/instance-3/output-1/target/usr/share/gdb rm -rf /home/naourr/work/instance-3/output-1/target/usr/share/bash-completion rm -rf /home/naourr/work/instance-3/output-1/target/etc/bash_completion.d rm -rf /home/naourr/work/instance-3/output-1/target/usr/share/zsh rm -rf /home/naourr/work/instance-3/output-1/target/usr/man /home/naourr/work/instance-3/output-1/target/usr/share/man rm -rf /home/naourr/work/instance-3/output-1/target/usr/info /home/naourr/work/instance-3/output-1/target/usr/share/info rm -rf /home/naourr/work/instance-3/output-1/target/usr/doc /home/naourr/work/instance-3/output-1/target/usr/share/doc rm -rf /home/naourr/work/instance-3/output-1/target/usr/share/gtk-doc rmdir /home/naourr/work/instance-3/output-1/target/usr/share 2>/dev/null || true rm -rf /home/naourr/work/instance-3/output-1/target/lib/debug /home/naourr/work/instance-3/output-1/target/usr/lib/debug find /home/naourr/work/instance-3/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/naourr/work/instance-3/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/naourr/work/instance-3/output-1/host/bin/nds32le-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/naourr/work/instance-3/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/naourr/work/instance-3/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/naourr/work/instance-3/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2019.02-9184-g2e8bf36dc44"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2020.11-git"; \ echo "PRETTY_NAME=\"Buildroot 2020.11-git\"" \ ) > /home/naourr/work/instance-3/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/naourr/work/instance-3/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/naourr/work/instance-3/output-1/per-package /home/naourr/work/instance-3/buildroot/support/scripts/fix-rpath target touch /home/naourr/work/instance-3/output-1/target/usr >>> Generating root filesystems common tables rm -rf /home/naourr/work/instance-3/output-1/build/buildroot-fs mkdir -p /home/naourr/work/instance-3/output-1/build/buildroot-fs printf ' dbus -1 dbus -1 * /run/dbus - dbus DBus messagebus user\n exim 88 mail 8 * - - - exim\n saned -1 saned -1 * /etc/sane.d - - Saned User\n\n' >> /home/naourr/work/instance-3/output-1/build/buildroot-fs/full_users_table.txt printf ' /bin/busybox f 4755 0 0 - - - - -\n /usr/libexec/dbus-daemon-launch-helper f 4750 0 dbus - - - - -\n /usr/bin/fusermount f 4755 0 0 - - - - -\n\n' > /home/naourr/work/instance-3/output-1/build/buildroot-fs/full_devices_table.txt cat system/device_table.txt >> /home/naourr/work/instance-3/output-1/build/buildroot-fs/full_devices_table.txt >>> Generating filesystem image rootfs.tar mkdir -p /home/naourr/work/instance-3/output-1/images rm -rf /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar mkdir -p /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar rsync -auH --exclude=/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM /home/naourr/work/instance-3/output-1/target/ /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/target echo '#!/bin/sh' > /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/fakeroot echo "set -e" >> /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/fakeroot echo "chown -h -R 0:0 /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/target" >> /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/fakeroot PATH="/home/naourr/work/instance-3/output-1/host/bin:/home/naourr/work/instance-3/output-1/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/naourr/bin:/home/naourr/git/git-wrappers:/home/naourr/.local/bin:/home/naourr/bin" /home/naourr/work/instance-3/buildroot/support/scripts/mkusers /home/naourr/work/instance-3/output-1/build/buildroot-fs/full_users_table.txt /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/target >> /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/fakeroot echo "/home/naourr/work/instance-3/output-1/host/bin/makedevs -d /home/naourr/work/instance-3/output-1/build/buildroot-fs/full_devices_table.txt /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/target" >> /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/fakeroot printf ' find /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/target -print0 | xargs -0 -r touch -hd @1601293346\n' >> /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/fakeroot printf ' \n' >> /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/fakeroot printf ' (cd /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/target; find -print0 | LC_ALL=C sort -z | tar --pax-option=exthdr.name=%%d/PaxHeaders/%%f,atime:=0,ctime:=0 -cf /home/naourr/work/instance-3/output-1/images/rootfs.tar --null --xattrs-include='\''*'\'' --no-recursion -T - --numeric-owner)\n' >> /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/fakeroot chmod a+x /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/fakeroot PATH="/home/naourr/work/instance-3/output-1/host/bin:/home/naourr/work/instance-3/output-1/host/sbin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/naourr/bin:/home/naourr/git/git-wrappers:/home/naourr/.local/bin:/home/naourr/bin" FAKEROOTDONTTRYCHOWN=1 /home/naourr/work/instance-3/output-1/host/bin/fakeroot -- /home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/fakeroot rootdir=/home/naourr/work/instance-3/output-1/build/buildroot-fs/tar/target table='/home/naourr/work/instance-3/output-1/build/buildroot-fs/full_devices_table.txt' ln -snf /home/naourr/work/instance-3/output-1/host/nds32le-buildroot-linux-gnu/sysroot /home/naourr/work/instance-3/output-1/staging make: Leaving directory '/home/naourr/work/instance-3/buildroot' make: Entering directory '/home/naourr/work/instance-3/buildroot' >>> Buildroot 2019.02-9184-g2e8bf36dc44 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-fakedate Collecting legal info >>> host-skeleton Collecting legal info >>> host-tar 1.29 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-andes-nds32 Collecting legal info >>> toolchain Collecting legal info >>> attr 2.4.48 Collecting legal info doc/COPYING: OK (sha256: 98f318493be6b08bff3cd295791cde06c54e17882a3c74a1ed245eaa02533d52) doc/COPYING.LGPL: OK (sha256: 5decad7e58d90d44335bf2f45ce27563bd911065c6a1a02dfa7647c4efee75c8) >>> berkeleydb 5.3.28 Collecting legal info LICENSE: OK (sha256: b78815181a53241f9347c6b47d1031fd669946f863e1edc807a291354cec024b) >>> busybox 1.32.0 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) >>> util-linux 2.36 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-pkgconf 1.6.1 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> cairo 1.16.0 Collecting legal info COPYING: OK (sha256: 67228a9f7c5f9b67c58f556f1be178f62da4d9e2e6285318d8c74d567255abdf) COPYING-LGPL-2.1: OK (sha256: 9e9e8608c4cdda51a78cc3a385f4ec9a2e4c96d5ecad74ac8bca5fca3e563b7d) COPYING-MPL-1.1: OK (sha256: 53692a2ed6c6a2c6ec9b32dd0b820dfae91e0a1fcdf625ca9ed0bdf8705fcc4f) >>> fontconfig 2.13.1 Collecting legal info COPYING: OK (sha256: fa4cd9ab005185e10cd8f7504518856c7dd36c01e766c2bac87f4fc638e9f886) >>> expat 2.2.9 Collecting legal info COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76) >>> freetype 2.10.2 Collecting legal info docs/LICENSE.TXT: OK (sha256: fd056de4196903a676208ef58cfddafc7d583d1f28fa2e44c309cf84a59e62fb) docs/FTL.TXT: OK (sha256: 08c135755dd589039470f1fdbb400daaabaaa50d0b366d19cebff4d22986baa1) docs/GPLv2.TXT: OK (sha256: c4120c6752c910c299e3bd9cb3a46ff262c268303ca2069b61f92f10a5656c18) >>> libpng 1.6.37 Collecting legal info LICENSE: OK (sha256: bf5e22b9dce8464064ae17a48ea1133c3369ac9e1d80ef9e320e5219aa14ea9b) >>> host-autoconf 2.69 Collecting legal info COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-gperf 3.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> pixman 0.40.0 Collecting legal info COPYING: OK (sha256: fac9270f0987b96ff4533fca3548c633e02083cbba4a0172a3b149b2e4019793) >>> cgic 2.07 Collecting legal info license.txt: OK (sha256: 6a7de92593d64dbf7630d8f66f97e04a899769bef1e055f2434bc06b87b9de62) >>> host-checkpolicy 3.1 Collecting legal info COPYING: OK (sha256: 204d8eff92f95aac4df6c8122bc1505f468f3a901e5a4cc08940e0ede1938994) >>> host-bison 3.7.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> host-gettext Collecting legal info >>> host-gettext-tiny 0.3.2 Collecting legal info LICENSE: OK (sha256: 4c938aa3d8fa3c184bba5e87a8a2febc89560627c9d0567536879e3eca1a7b4f) extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> host-libselinux 3.1 Collecting legal info LICENSE: OK (sha256: 86657b4c0fe868d7cbd977cb04c63b6c667e08fa51595a7bc846ad4bed8fc364) >>> host-libsepol 3.1 Collecting legal info COPYING: OK (sha256: 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3) >>> host-pcre 8.44 Collecting legal info LICENCE: OK (sha256: 0dd9c13864dbb9ee4d77a1557e96be29b2d719fb6584192ee36611aae264c4a3) >>> host-python3 3.8.5 Collecting legal info LICENSE: OK (sha256: de4d1f2d2ad5ad0cfd1657a106476b31cb5db5ef9d1ff842b237c0c81f0c8a23) >>> host-expat 2.2.9 Collecting legal info COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76) >>> host-libffi 3.3 Collecting legal info LICENSE: OK (sha256: deaf3a42effb551a5b140fa9afefed183a27f1341c6d1bf430d106a5e6931fc0) >>> host-zlib Collecting legal info >>> host-libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> host-swig 4.0.2 Collecting legal info LICENSE: OK (sha256: f53abaeed775018d519a1b9615f0ca17894772bd9ca21c2a156bf340ac41c13e) LICENSE-GPL: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) LICENSE-UNIVERSITIES: OK (sha256: 7f50d942373a871211c5efee03f3db2f9efd1cff1002b0ef8e3748baa611a5c2) >>> dbus 1.12.18 Collecting legal info COPYING: OK (sha256: 0e46f54efb12d04ab5c33713bacd0e140c9a35b57ae29e03c853203266e8f3a1) >>> dump1090 bff92c4ad772a0a8d433f788d39dae97e00e4dbe Collecting legal info anet.h: OK (sha256: 29046ef7ee0b7b127bcc64faf135035820906dea2b379b2efcfc119131a39f7a) >>> librtlsdr ed0317e6a58c098874ac58b769cf2e609c18d9a5 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> libusb 1.0.23 Collecting legal info COPYING: OK (sha256: 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a) >>> ell 0.33 Collecting legal info COPYING: OK (sha256: ec60b993835e2c6b79e6d9226345f4e614e686eb57dc13b6420c15a33a8996e5) >>> exim 4.94 Collecting legal info LICENCE: OK (sha256: 49240db527b7e55b312a46fc59794fde5dd006422e422257f4f057bfd27b3c8f) >>> host-berkeleydb 5.3.28 Collecting legal info LICENSE: OK (sha256: b78815181a53241f9347c6b47d1031fd669946f863e1edc807a291354cec024b) >>> pcre 8.44 Collecting legal info LICENCE: OK (sha256: 0dd9c13864dbb9ee4d77a1557e96be29b2d719fb6584192ee36611aae264c4a3) >>> glorytun 0.3.4 Collecting legal info LICENSE: OK (sha256: 3d9ddddb8807c305287d9dbab58473e5307e9c91651c43c654a0828855d2b373) >>> libsodium 1.0.18 Collecting legal info LICENSE: OK (sha256: dea1855c9809f3faf22aa4a1fba20ec8af5a5587f23115012e5b98279cedc4af) >>> initscripts Collecting legal info >>> iwd 1.9 Collecting legal info COPYING: OK (sha256: ec60b993835e2c6b79e6d9226345f4e614e686eb57dc13b6420c15a33a8996e5) >>> jitterentropy-library 2.2.0 Collecting legal info COPYING: OK (sha256: 96b5a6b49aaeeba9036f9b80e6e299d613a8eca158741a25a67dc78792413e23) COPYING.bsd: OK (sha256: 13aa749a5b0a454917a944ed8fffc530b784f5ead522b1aacaf4ec8aa55a6239) COPYING.gplv2: OK (sha256: e6d6a009505e345fe949e1310334fcb0747f28dae2856759de102ab66b722cb4) >>> jpeg Collecting legal info >>> libjpeg 9d Collecting legal info README: OK (sha256: 3dc4e4a145c907a96bd6a0e40be3f722fecf061951909143cdff5365cba9c78c) >>> libapparmor 2.13.4 Collecting legal info LICENSE: OK (sha256: a7e0cdcbea5c14927cedfc600d46526bdcbb1eb0a4d951e2ea53c2a6de159cb4) libraries/libapparmor/COPYING.LGPL: OK (sha256: 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3) >>> libarchive 3.4.3 Collecting legal info COPYING: OK (sha256: e1e3d4ba9d0b0ccba333b5f5539f7c6c9a3ef3d57a96cd165d2c45eaa1cd026d) >>> xz 5.2.5 Collecting legal info COPYING: OK (sha256: bcb02973ef6e87ea73d331b3a80df7748407f17efdb784b61b47e0e610d3bb5c) COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.GPLv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libdnet 1.11 Collecting legal info LICENSE: OK (sha256: 1e94df12cb3701fa64e07eeb60284bb16a3544815d5a39860dacff7b86610584) >>> libftdi1 1.5 Collecting legal info LICENSE: OK (sha256: 524f46428bf72bb8c6acfeca4909551fd2e0bdbb5305406d38382f4056095c56) COPYING.LIB: OK (sha256: b7993225104d90ddd8024fd838faf300bea5e83d91203eab98e29512acebd69c) >>> libfuse 2.9.9 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libidn2 2.3.0 Collecting legal info COPYING: OK (sha256: 73483f797a83373fca1b968c11785b98c4fc4803cdc7d3210811ca8b075d6d76) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.LESSERv3: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) COPYING.unicode: OK (sha256: 01d621eef165cf4d3d3dbb737aa0699178d94c6f18cf87e9dde6db3ca7790f46) >>> libpcap 1.9.1 Collecting legal info LICENSE: OK (sha256: 8a54594d257e14a5260ac770f1633516cb51e3fc28c40136ce2697014eda7afd) >>> libsvg-cairo 0.1.6 Collecting legal info COPYING: OK (sha256: d80c9d084ebfb50ea1ed91bfbc2410d6ce542097a32c43b00781b83adcb8c77f) >>> libsvg 0.1.4 Collecting legal info COPYING: OK (sha256: d245807f90032872d1438d741ed21e2490e1175dc8aa3afa5ddb6c8e529b58e5) >>> lmbench 3.0-a9 Collecting legal info COPYING: OK (sha256: 91df39d1816bfb17a4dda2d3d2c83b1f6f2d38d53e53e41e8f97ad5ac46a0cad) COPYING-2: OK (sha256: 3be7a155efa448db90071a95fbf81796f8f90edf9204f0463cfd23402dc90a72) >>> lua-flu 20181218-1 Collecting legal info doub-flu-63f077a988cd/doc/LICENSE.txt: OK (sha256: 409f7c274eb26874a382241d675a360ba6b2659742c5941e680d71a41dd35913) >>> host-luarocks 3.4.0 Collecting legal info COPYING: OK (sha256: 542ad0ee9b8ba582437ca7b4d0959c9b9432f25d2067f144d017188a7a84dd2f) >>> host-luainterpreter Collecting legal info >>> host-lua 5.3.6 Collecting legal info ERROR: No hash found for doc/readme.html >>> luainterpreter Collecting legal info >>> lua 5.3.6 Collecting legal info ERROR: No hash found for doc/readme.html >>> lua-livr-extra 0.1.1-1 Collecting legal info lua-LIVR-extra-0.1.1/COPYRIGHT: OK (sha256: 96751dc604608ecf2357d1599bc2d2e9f56382793a6c218dc98d460759adbf07) >>> lua-livr 0.2.1-1 Collecting legal info lua-LIVR-0.2.1/COPYRIGHT: OK (sha256: 8f09089acf52cfabcc2a44ec3a492dc261e0ae9df3c618f43b33805e696e02d8) >>> ngrep 1.47 Collecting legal info LICENSE: OK (sha256: d46e593e048e0b9fc803561ed4c283f37a2d5447e4dcfa10cad29b394c2b8b9e) >>> openresolv 3.10.0 Collecting legal info LICENSE: OK (sha256: 384740bf5e19e7628d20f4dcc22925062fdc6020e9a6f074e567d4d797be57a0) >>> opentyrian-data 2.1 Collecting legal info >>> opentyrian 9c9f0ec3532b Collecting legal info WARNING: no hash file for COPYING >>> sdl 1.2.15 Collecting legal info COPYING: OK (sha256: bb117c0fbd7f57f64170b690285d7df07c2371b578e3b3cd3aa2e1155ef461a0) >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> pixz 1.0.6 Collecting legal info LICENSE: OK (sha256: d036806b4d1efee7c6d86276451c4d833e9798751417e25daae62dfbe348641b) >>> procrank_linux 21c30ab4514a5b15ac6e813e21bee0d3d714cb08 Collecting legal info NOTICE: OK (sha256: 38751245389e1e23f73e6f5384b5cbe7fa972cc4410c5adc9c04b082a0b9561a) >>> sane-backends 1.0.27 Collecting legal info COPYING: OK (sha256: dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa) >>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Collecting legal info LICENSE: OK (sha256: a45d0bb572ed792ed34627a72621834b3ba92aab6e2cc4e04301dee7a728d753) >>> host-sg3_utils 1.45 Collecting legal info COPYING: OK (sha256: d516b8b337a77e3d4c65dffe708ca7fb25b1cb4ec77ec362cf11ed659b9250bc) BSD_LICENSE: OK (sha256: 8ddd1d82f2be2f5cbd5b5c3b5c2ee94a90d2ca7112958448da74dd78384fd96a) >>> wipe 2.3.1 Collecting legal info LICENSE: OK (sha256: 890cd89006bb57ce95b460e867c7bcc81d30cbc23067a9be4644bdac6882bc14) >>> wireless-regdb 2020.04.29 Collecting legal info LICENSE: OK (sha256: 678b0df753c86198fc496d1f1033429bbd57f101472132ee7eaaf9f5e0a7fae1) >>> host-acl 2.2.53 Collecting legal info doc/COPYING: OK (sha256: a45a845012742796534f7e91fe623262ccfb99460a2bd04015bd28d66fba95b8) doc/COPYING.LGPL: OK (sha256: 01b1f9f2c8ee648a7a596a1abe8aa4ed7899b1c9e5551bda06da6e422b04aa55) >>> host-attr 2.4.48 Collecting legal info doc/COPYING: OK (sha256: 98f318493be6b08bff3cd295791cde06c54e17882a3c74a1ed245eaa02533d52) doc/COPYING.LGPL: OK (sha256: 5decad7e58d90d44335bf2f45ce27563bd911065c6a1a02dfa7647c4efee75c8) >>> host-fakeroot 1.20.2 Collecting legal info COPYING: OK (sha256: fc82ca8b6fdb18d4e3e85cfd8ab58d1bcd3f1b29abe782895abd91d64763f8e7) >>> host-makedevs Collecting legal info >>> host-mkpasswd Collecting legal info WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-andes-nds32: cannot save license (TOOLCHAIN_EXTERNAL_ANDES_NDS32_LICENSE_FILES not defined) WARNING: opentyrian-data-2.1: cannot save license (OPENTYRIAN_DATA_LICENSE_FILES not defined) Legal info produced in /home/naourr/work/instance-3/output-1/legal-info make: Leaving directory '/home/naourr/work/instance-3/buildroot'